John Deere: what farmers say
2564 reports in FARM SHOW · 2207 Best Buys367 Worst Buys
John Deere (general)
428 Best Buys79 Worst Buys“My 4430 is one of the best tractors John Deere made.”
“When I restored my Deere A tractor I also installed new rings and a new radiator, and performed a valve job. This is the third Deere A I’ve owned. I plan to give this tractor to one of my sons someday. Our grandkids love driving Deere tractors.”
“I bought two Vicon CMZ800 disc mowers about 2 years apart. These mowers feature 3-blade discs for better cutting ability, and they have heavy cutterbars. The bar and gearbox oil are easy changes. Mows through the thickest hay with ease.
“The hydraulic coupler dust covers I bought from Deere for my 1995 Deere 6300 tractor cost $12.50 apiece. These rubber covers are designed to snap onto the hydraulic couplers on back of the tractor, but after one or two uses they tore and came apart. Deere refunded my money. I went to Tractor Supply Co. and bought their dust covers for $4.25 for two. These covers are much stronger and are still working good.”
“I’ve followed with interest stories in recent issues of FARM SHOW about high-priced parts from Deere. Your U.S. readers might be interested in what it’s like to own Deere equipment in Canada, especially if you’re not near the border. I had to replace a glass panel on my 5085M tractor door. List price in the U.S. is $295. Because the part is also available in Canada, Deere won’t ship direct from the U.S. Orders have to go through a Canadian dealership, which charged me $620. Now that’s what I call a real rip-off.”
“My Deere dealer has been in the business for 62 years. His name is Ivan Carmichael and he started a dealership in Chatsworth, Ontario in 1951. Over the years he sold and serviced thousands of Deere tractors and other equipment. In the 1990’s, Deere decided it should have less dealers so Ivan joined a dealership in Walkerton and they called it Northridge Tractor. In the early 2000’s, Deere again decided to get rid of dealers so Ivan joined Huron Tractor, which has 9 different locations. I hope Deere benefitted from these decisions because the Carmichaels, and the farmers in this area, did not. However, we’re fortunate to still have this good dealership while Case, International, Ford and Allis Chalmers are all gone. Today, Ivan can still be seen at the dealership almost every day of the week. His daughter, son and two son-in-laws work there, too.”
“My 2010 Ford F-150 4-WD pickup equipped with a 5.4-liter gas engine is my worst buy. It has about 20,000 miles on it. The rear end went out once and the brakes have had problems. This pickup rides on Goodyear Wrangler tires, two of which had to be replaced because of separated belts. The computer says the pickup is getting 14.4 mpg, but I think that’s a stretch. Now I’ve put it up for sale.
“I like anything Deere. I have ¿ ve tractors, a sprayer, a combine, a riding mower, and several large implements. No problems with any of them.”
“My Deere A tractor at one time belonged to my grandfather. Now I own it and it still runs great. I have only one leg, but I can still drive this tractor with no problem.”
“I used to say, ‘You can’t farm without a pickup.’ Now I say, ‘You can’t farm without a Deere Gator.’ I love my 4 by 6 diesel because it goes anywhere and is especially handy for fencing work. It has a low box which also makes it easy to pick up rocks in the field. The diesel models are heavier and have a lot more power than the gas models.”
“I bought a 1950 Deere A tractor that needed repair work. It was a fun project to work on, and plenty of used and new parts were available. Now it’s a great running tractor.
“My 1997 Lincoln Town Car equipped with a 4.6-liter engine is my worst buy. The engine has a plastic intake manifold that started leaking at 60,000 miles. The company offers a kit with a new intake with metal inserts in the water jacket. There’s also a replacement mount for the alternator. It cost me $1,800. Why didn’t Ford recall this problem? Do all Ford 4.6-liter engines leak behind the alternator?”
“My 1999 Case-IH 2366 4-WD Axial Flow combine is my best buy. It has a lot of power and has been trouble-free. It doesn’t lose any grain over the rear sieves even in heavy corn and beans. This machine handles like a Cadillac.
“My early 1950’s Deere No. 5 mower has had very few problems over the years. All I’ve had to do is replace a section or guard once in a great while.
“My 1999 M&W 797 Clipper 9-ft. disc mower is my worst buy. It doesn’t work well in big weeds. I paid $6,000 for it. The first summer I used it I had to spend $2,000 for repairs, and the company wouldn’t help pay for anything. We had to replace the hex shaft, gears and bearing, and all the belts. We also had to reweld part of the frame where the original welds came apart. Another problem was that the blades and bolts broke off. It all resulted in a lot of downtime. This mower is one of the most troublesome pieces of equipment I’ve ever owned.”
“I’m 80 years old and have been retired for 17 years, so I haven’t bought any major equipment lately. However, we still live on the farm and have saved several items from the good old days. All of these machines continue to serve us well, and in addition they keep a lot of good memories alive. Once upon a time, they were all best buys.
“The machines include a Grasshopper mower with an 18 hp Briggs & Stratton gas engine; an Allis Chalmers 720 yard tractor with a 20 hp Onan engine; a Miller portable welder; and a series of Bobcat skid steer loaders, each one better than its predecessor. The newestone is a 742 model. We’ve also saved several tractors - a 1958 Case 900 B, a 1949 unstyled AR Deere, a 1946 Farmall H, and my favorite, a 1949 Oliver 88. It was ahead of its time and was equipped with live hydraulics, pto, and a smooth 6-cylinder engine. I added a homemade 3-pt. hitch to make it even more useful.”
Richard nominates his 1999Husky 3,600-gal. slurry spreader as his “best buy”. “I’ve put about 1 1/2 million gallons through it with no problems and no plug-ups. It’s equipped with big tandem 28L by 26 tires which float over any ground that the tractor can get through. My only complaint is that it spreads manure a bit thick, but that can be altered.
“I’ve had good luck with my 1947 Deere A tractor. It has more than 24,000 hours on it with only minimal expenses.
“My 10-year-old Makita 5-in. hand grinder works like new and is absolutely trouble-free. It’s small enough to maneuver in close quarters, yet it has enough power to remove material fast when necessary. It does a good job. I use it with a low-cost, softer wire cup brush to scrape or remove old paint. This type of brush works best because it tends to flatten out. I scraped an entire garage in only two hours.
“My best buy of all time was my 1945 Deere A tractor which I bought used in 1975. The only money I’ve spent on it was for paint and tune up parts. It always starts and never gets hot. It’s not a big tractor but it has enough power for my small operation and doesn’t burn oil to this day. I did have to put in a new flywheel seat last spring, but it cost me only about three dollars.
“My Remington chainsaw is my worst buy. I found out that when it needed repair work there was only one place in the entire state where I could get parts for it, and that was a small engine repair shop. It took forever to get it repaired and the parts were very expensive.”
“I plan on running them another 10,000 hours or more. So far I’ve had very few problems,” says Larry, pleased with his pair of 1983 Deere 4450’s. He lengthened the clutch springs on the tractors so they’re not so jerky when using them.
Dean’s pleased with the handling, power, efficiency and durability of his pair of Deere 4630’s, a 1974 and a ‘75 model. But he wishes Deere made a reasonably priced side exhaust kit and add-on front wheel assist for the tractors.
On the negative side, Dean’s unhappy with his 1982 Deere 158 front-end loader. “It isn’t quick-tach and there’s no good way to modify it without cutting it apart, spreading out the arms, and building new mounting brackets. Basically, you’ve got to start all over.”
“My 1995 Chevrolet S-10 extended cab pickup is the best I’ve ever owned. It has 31,000 trouble-free miles. The 4.3-liter, 200 hp Vortec engine is very responsive and gets 22 to 24 mpg on the highway which I think is very good for a 4-WD. “I have a 1951 Deere A tractor that I bought 25 years ago and it still runs great. I think that with a little tender loving care these old tractors would last forever.”
“I like the trailer I bought from Deere last year to pull behind my 4-wheel ATV. I use it to do chores in the mornings and to pick up leaves and sticks around my yard. “My worst buy is a 1993 Pride of Ply-mouth feedbunk. There’s no place for water to drain out and calves can move it around too easily.”
Arthur Buss, Hastings, Neb.: “I bought it 50 years ago when I started out farming and it’s still my best buy today,” says Arthur about his 1938 Deere “B” bought new in August 1937. “I paid $732 for the tractor and had a heck of a time getting it paid for. I originally financed it through Deere at about 7% interest. My payments averaged $150 a year. “One year my father and I used it with a 2-bottom plow on 150 acres, We plowed night and day to finish the job, The tractor didn’t have any lights, of course, so I cut holes in two cream cans and placed lanterns in them, then tied them to the rear axles to provide light. The ‘B’ was my main tractor for disking, plowing, and drilling until 1946, “When received a medical discharge from the Air Force, bought a Deere *A’ to do our main work and built a loader for the ‘*B’ so I could use it for chores. 1 still use the tractor today to move snow, operate a grain auger, and for general chores. In 1946 I converted the tractor’s steel wheels to rubber which increased the tractor’s power by almost one-third, The original loader was operated by levers, but the loader I now use operates on hydraulics that I installed on the tractor about 10 years ago.” Buss estimates that the tractor has about 1ys 15,000 hours on it. It’s been overhauled several times, most recently about L5 years ago.
Loren J. Welsh, Fennimore, Wis.: “My 1995 Deere round baler is my best buy. It lets me make hay by myself, the easy way.”
Luther Weisman, Otwell, Ind.: Luther is pleased with his 1994 J & M 750 bu.grain cart equipped with weigh scales. “It unloads quick and pulls easy. The scales are accurate and easy to calibrate. “My 1993 United Farm Tools 750-bu. hydraulic grain cart is my worst buy. It didn’t work good at all with our Deere tractor’s closed hydraulic system. Extremely slow, We also had trouble with the accuracy of the scales, Our dealer made sure we were happy by charging us only a year rental fee and then refunding our purchase price and taking the cart back.”
Lester Schlenker, Cherry Valley, Ark.: Lester nominates his Deere CTS combine equipped with a rotor as “best buy”. “Tt has alotof capacity and will take care of a large acreage. “My Brent 772 grain cart is equipped with big wheels, allowing it to haul large loads without leaving any wheel ruts.”
Warren Wing, Newkirk, Okla.: “My worst buy is my Deere 4230 tractor, It worked alright for light work such as baling, swathing, planting, etc., but used a lot of fuel even on light loads. The dealer's mechanic got it up to 100 hp, barely, but it still wouldn't pull my 4-bottom plow. It always ran hot and the 3-pt. hydraulics never worked right. Also, it ate up a lot of fuel. Deere really goofed when they replaced the 4020 with this model.”
Linwood Thompson, Tenants Harbor, Maine: Overall, Linwood’s pleased with his 1981 Deere 1070 35 hp diesel tractor. However, when a crack developed in a power steering hose he found it was expensive to replace. “I bought a replacement hose for $12 at an auto supply store, but it wasn’t metric so I couldn’t use it. ended up having to pay my Deere dealer $53 for the hose which I think is way too much, The hose is only about 1 ft. long. “The tractor starts better in cold weather than any other diesel tractor I’ve ever had. It has a glow plug for starting in cold weather, but I don’t even have to use it unless the temperature drops below 12 to 15 degrees, One problem is that the gap between third and fourth gear is too wide. In third gear it goes 1.9 mph and in fourth gear 3.8 mph, Also, the tractor’s top speed is only 8 to 9 mph. Small, wide turf tires on the tractor reduce speed about 14% compared to conventional tires, but even so it should go faster.”
Mike Rinker, Redkey, Ind.: Mike's impressed with his 1993 J & M 525 grain cart. “I like it because I can unload on-thego which saves a lot of wear and tear compared to having to stop and unload. The cart is just as efficient for my harvest operation as having another combine, It’s big enough that it can unload two combine grain tanks yet is built light enough to minimize soil compaction. “My worst buy was my Massey Ferguson 760 combine. couldn't use it for even a day without it breaking down. It got so bad that I had to buy a service truck for it. Now that run a Deere combine, all my hand tools in the service truck are rusty.” “TI couldn't use it for even a day without it breaking down.”
Joseph Warren, Maple City, Kan.: “It drives like a dream,” says Joseph, pleased owner of a 1985 Pontiac Grand Prix. “It turns corners without skidding and the 6 cyl., 4.2-liter engine runs smooth, It has a lot of power and doesn't require much maintenance, I tuned it up at 45,000 miles and it still runs good even though it has 132,000 miles. It gets 24 mpg on the highway. “My worst buy is my Deere field cultivator. It's equipped with 6-in. sweeps and spring shanks with coil springs that break easily, The springs cost quite a bit and don’t last long. The arms on the wheels are held in place by copper bushings which wear out, “My New Holland 275 baler has trouble tying bales in dry, springy hay which pushes the strings off the knotter so it won't tie. The baler should come with gears so that the knotter can be speeded up to tie the knot before the plunger returns in those conditions, However, in normal hay conditions it ties good.”
Fred Eggers, Brooklyn, Conn.: A 1985 Allis-Chalmers 8070 front wheel assist tractor rates as Fred’s “best buy”. “It’s been an excellent tractor. I bought it with about 2,500 hours. I spent only about half as much as I would have on a Deere and it’s a better tractor.”
Edward Steiman, ‘Triplett, Mo. “My best buy is my 1975 Chevrolet 1/2-ton pickup equipped with a 454 cu. in. engine, It has over 550,000 miles on it and the engine has never been touched. replaced the transmission at 420,000 miles.” Glenn G. Bremer, Nebraska City, Neb.: Glenn’s all-time “best buy” was a 1937 Deere Model A tractor he bought used for $650 when he started farming in 1938. “The only repairs it ever needed were a ring job or two, new spark plugs as needed, and a paint job, When I retired from farming in 1972, it sold for $3,150 at my sale.”
Glenn G. Bremer, Nebraska City, Neb.: Glenn’s all-time “best buy” was a 1937 Deere Model A tractor he bought used for $650 when he started farming in 1938. “The only repairs it ever needed were a ring job or two, new spark plugs as needed, and a paint job, When I retired from farming in 1972, it sold for $3,150 at my sale.”
Gerald Austin, Salcha, Alaska: Gerald's unimpressed with his 1991 W-250 Dodge pickup equipped with Cummins diesel, “In 60,000 miles, I've had a front locking hub, transfer case seal, and re... «le seal go out. [thas less load carrying «pac ity than my old International pickup. The only good thing Lean say is that it gets fairly respectable fuel mileage, about 20 mpg uverage.” Clayton Severson, Stewartville, Minn, A Deere Gator 4-WD purchased a year ago is Clayton's “best buy”. “It's really handy around the farm, there's just no end to its usefulness. If I'm not using it, my wife is.” Daniel Rion, Prattsville, N.Y... “Our Badger Northland 3500 truck-mounted vacuum manure tink and pump is one of our best buys. It came ina kit that made it easy to install on our truck. It does a fine job and is easy to maintain,”
Clayton Severson, Stewartville, Minn.: A Deere Gator 4-WD purchased a year ago is Clayton's “best buy”. “It's really handy around the farm, there's just no end to its usefulness. If I'm not using it, my wife is.”
Donald C. Reetz, Webster, S. Dak.: “My 1989 Deere 4755 wactor equipped with MFWD is one of my best buys, as were all the other 13 Deere tractors I've owned since 1969, purchased the 4755 used and have put about 2,200 hours on it without any down time or repairs. T liked its traction, power, handling ease, and comfortable, roomy cab, In fact, [liked the 4755 so much, traded it for a 1991 Deere 4955, also equipped with MFWD, last winter “One of my worst buys a Rem 1026 grain vac. Since T bought it new in 1992, T have had to repair its belts, bearings. chains. and sprockets, and flex tubing. Trouble is. parts are priced sky high. There must be a 100 to 150% markup to the customer by the time they get through the distribution chain.”
Michael Mechem, Clarion, Iowa: Michael says he wouldn’t run a Deere Maximizer combine without a Schwerin concave and finger grate like the one he installed for harvest last fall (Schwerin Concaves, Inc., Rt. 5, Box 314A, Walla Walla, Wash. 99362 ph 800 468-1888 or 509 525-7556). “We bought a Deere 9500 Maximizer a few years ago and all we ever did was grind grain and put it out the straw walkers. Deere factory reps and our local dealer worked and worked to remedy the problem with no success. The Schwerin concave made a dramatic difference, and we're extremely pleased. We've got more capacity, no grain loss, and no more ground grain.”
David Proden, Ladysmith, Wis.: A 199] Ford 8730 tractor and a 1993 Deere discbine are two of David's best buys. “The tractor has a transmission that’s a dream to shift and the cab is comfortable and quiet. The discbine is a dandy. I can go as fast as I want, and the impellers dry hay just as good as rollers or better. “My worst buy was a New Holland Hydro haybine that I bought new in 1993 for $14,000. I used it to cut 130 acres of hay and couldn’ t keep it from plugging up. My dealer tried to fix it but couldn't. He called experts at New Holland who came out one day and told me the machine wouldn't cut my hay but couldn't figure out why, They were prepared to give me my money back, but apparently some of the company brass thought differently. had to keep after the company - one official even had me investigated for some reason - for nine weeks before I got my money. Then, I got only $13,500 back because, the company argued, I'd cut hay with the machine. That's the last piece of New Holland equipment I'll ever buy.”
Walter Bockwaldt, La Moure, N. Dak.: “Deere set farming back about 40 years when they came out with the 730 air disc drill, I bought one in 1993 and found it leaves an uneven seedbed and does a very poor job of packing soil around seed. “My best buy is my 1993 Case IH 9270 4-WD tractor. It’s quiet, easy on fuel and has a lot of power. The power shift transmission is a dream come true. This is a tractor you can put any hired man or kid on and not worry about them hurting it.”
Louis Ehlers, Sedgwick, Kan.: “The Kennametal Slicer furrow openers I bought for my Deere MaxEmerge 7200 are my worst buy. They’re supposed to keep the furrow open until seed drops to the bottom, but all they do is pack soil between the two opener disks. My 7200, which is one of my best buys, wouldn’t plant corn with the Slicers. I spent hours trying to make them work and finally took them off after planting only three acres.”
Sylvester Huse, Warnerville, N.Y.: Heading his “best buy” list is a Deere AMT 600 4-WD 5-wheel utility vehicle. “We bought it about a year ago to help manage grazing of our 100 plus beef brood cows. We affectionately call it our green horse. From May to about Christmas, the AMT carried temporary fence supplies daily. It is possible to get it stuck but you really have to try. A friend says it works like a hovercraft. My son and wife complained that they could never get their hands on it because I had it so much, so we bought another one to use this year. “There are some problems with the AMT, however. It starts poorly in cold weather. And it’s underpowered, which adds to the safety of the vehicle but is frustrating.”
Frank Allen, Kenton, Tenn.: Frank's more than pleased with the Chevrolet Silverado 4-WD pickup he bought new in 1993. It now has 30,000 miles. “It drives and rides like a Cadillac with plenty of head and shoulder room. Its 350 cu. in. engine is extremely powerful and gets better than 18 mpg, almost twice what my old Ford 4-WD pickup got. I'll never buy another Ford. “My worst buy was a Case-IH Magnum 7130 tractor equipped with front-wheel-assist. The hydraulics are a joke. The power lift leaks down while the tractor is in operation. You have to push the lift lever down and then pull it back up to reset it, It sometimes blows the hose end out of the outlets when lifting an implement. The engine had to be overhauled at 2,000 hours, It drives and rides like a log wagon compared to Deere tractors I’ve owned.”
Harvey Melcher, Friendswood, Texas: Harvey's two best buys are his 1994 Deere 265 riding mower and his 1991 2555 Deere tractor. “I do custom mowing and landscaping so I use my equipment every day. These two latest Deere purchases are, to date, trouble-free. The tractor has a detachable front end loader, also trouble-free. I use a 10-ft. and a 15-ft. flex mower deck and the pto on the mower has also been trouble-free. “If anyone's interested in buying a used mower, I'll consider almost any offer for my Modern (Beaumont, Texas) 8-ft. rotary mower, It’s called the “Super Commando,” but I call it my super worst buy. We've had to rebuild both tailwheel assemblies with l-in. thick steel to keep them from constantly bending. The wheel bearings are designed so vines constantly get in and destroy seals. It has many other problems, too,”
Darrell Rains, Beatrice, Neb.: Darrell's best buy is his 60 hp Deere 5400 tractor equipped with front-wheel-assist and 540 Deere loader. “It’s a handy tractor with plenty of power. With front-wheel-assist it will go where big tractors can’t. We use it every day.”
Neil Smith, Battleford, Sask.: “We're very pleased with our Deere 4020 tractor. It just keeps on going and going, and there’s seldom a day we don’t use it, It has a Deere loader on it that’s just a marvelous piece of equipment, too.”
Ralph Muecke, Gladstone, N. Dak.: Ralph nominates one Deere hay tool as his best buy and another as his worst. “The Deere 375 round baler I bought in 1993 is well-built. It makes good solid bales, the double twine tie does an outstanding job of tying bales, and the machine will bale anything - even Russian thistles. The only problem is it was terribly overpriced. “My worst buy was a Deere 800 swather, in spite of the fact that it worked and cut well. The problem was that there were way too many moving parts, You had to tear the swather nearly half apart in order to change some of the bearings and belts, causing lots of unnecessary downtime. Also, the roller chains were way too light for their application.”
Lyle Hoffman, Waterloo, Hl.: The 47in. Deere mower deck and grass vacuum Lyle bought for his 22-year-old Deere 110 mower gave “it new life. It mows much smoother and leaves a litter-free lawn, It's now up to specs of a modern mower. “With only 44,000 miles on my 1989 K1500 Chevrolet pickup, the bracket that holds the power steering, air conditioner compressor, and alternator cracked and broke off the studs in the engine block. That was last August. In October, we had to replace the transfer case because the old one was bone dry, even though we never noticed any oil leaks on our concrete driveway or garage floor. The used transfer case they put in operates smoothly, unlike the original. Cost on the second big repair job was $1,500 with no help from Chevrolet.”
Jake Herzog, Jr., Slingerlands, N.Y.: A 1991 Deere “Gator” 4 by 2 equipped with optional dump box is Jake's best buy. “This machine replaced a trailer I used to pull behind a lawn tractor and a4-WD farm pickup. We use it for hauling stones from fields, firewood to the house, earth around the place, etc. It’s also great transportation to and from our pond. “Our 1993 Grasshopper 718 does everything the company promised. It reduced mowing time by 30% over my Deere 300, which had comparable hp and deck size. The lever-adjusted deck height is a big advantage over comparable front-deck mowers.” A 1989 Ford F250 heavy-duty pickup is Jake’s worst buy. “The 351 cu. in. engine gets worse gas mileage than the 460 engines we use in our other trucks. Also, because the anti-lock brakes have a tendency to malfunction, we've had a few “near misses.’ The dealer says there’s nothing wrong.”
Tom Farlow, Bahama, N.C.: “My Deere MFWD 7200 equipped with cab and loader is the Rolls Royce of 100 hp tractors, as far as I'm concerned,”
Louis H. Ehlers, Sedgwick, Kan.: "My best buys are my 1993 Deere Max-Emerge 7200 planter, my 1994 Great Plains 24-ft. folding drill, and my 1994 Schaffert Mfg. Co. furrow closer wheels for my Deere planter. The planter does a good job and the dealer took good care of all warranty. Before installed the Schaffert closing wheels, the seed furrow would not always close. Now it does.They really shine in a wet seedbed. The Great Plains drill worked well last fall but now needs a bit of warranty work. Now I'll find out what kind of company it is.”
Terrell Webster, Houston, Texas: “One of our best buys is our Deere walkbehind lawn mower. My wife is a very tiny woman but she can start it without help. After three years it still always starts on the second pull.”
Kent Estes, Altoona, Kan.: Kent's disappointed with his Crustbuster Speedking 20-ft. flex rotary mower and Crustbuster 4000 30-ft. grain drill. “The design of these products is quite good, but the quality of steel used is far inferior to the steel used by major companies like Deere. The poor quality of the steel and also the paint probably explains why this equipment is priced so much lower, The company doesn't do a 200d job of following up on complaints and doesn't have a toll-free phone number, Anyone who buys these products should have a good welder handy.”
Robert E. Ziegenhagel, Medicine Hat, Alberta: Robert likes his 1989 GM 4-WD 1/2-ton pickup. “It has over 125,000 miles of rough ranch work and highway driving. I've used and abused this pickup something awful but it just keeps on running like a clock. I'll buy another one.” John C. Rutkowski, Waterford, Penn.: “My Gehl 2340 discbine does a nice job of conditioning hay, pulls easy, and is well built. One minor problem is the hitch, I'm replacing it with a Deere hitch. Then it will be an even better machine. “My McConnel springtooth harrow is my worst buy, It can be mounted on a 3-pt. hitch or used as a pull-type. However, when you use the drag-type hitch the cross bar that the 3-pt. hitch is mounted on drags on the ground. Whenever I try to correct that problem by lifting the 3-pt. enough so the bar won't drag, the front teeth won't even dig in the ground. the entire machine is built flimsy. I have to use it with a smaller tractor so that won't bend any cross pieces or braces.”
John P. Voigt, South Haven, Kan.: John's the satisfied owner of a 1987 Ford F-250 diesel pickup. “When I bought it Ford used the same exhaust system on both its gas and diesel models. However, the exhaust system had too much back pressure for the diesel engine so I had a new stainless steel exhaust system and a new air cleaner installed. Now the 6.9-liter engine has about the same horsepower as a 7.3-liter engine. The pickup is built heavy and I likeit. “In August 1991 I purchased a new Deere 2355 MFWD tractor equipped with a Deere 245 loader and no cab, It’s the biggest small tractor I've ever owned, I really like how it shifts. I traded a Ford in on it and am glad that I didn’t buy another Ford. One problem is that most Deere dealers order this tractor with economy hydraulic outlets which I had trouble using. I waited until Deere had one of its half price sales, then bought a set of standard plug-ins. “I recently purchased a Deere 7800 MEFWD tractor equipped with a power quad transmission. like the transmission as well as the tractor’s large cab, comfortable seat, and easy-to-fill fuel tank. I traded in a 1988 Deere 4450 MFWD tractor that had 1,100 hours on it. It rode so hard it hurt my back, and it seemed like it was always in the shop for minor repairs.”
Steve Weisbrod, Canastota, N.Y.: A 1994 Chevrolet S-10 extended cab pickup equipped with a 200 hp 6-cyl. engine rates as Steve's “best buy”. “It’s built strong and has a quiet, comfortable ride. Even with the high output 6-cyl. engine it gets 21 mpg. The computer-controlled 4-speed automatic transmission shifts smooth and is always working in the right gear. “My Deere electronic moisture tester is my worst biy. The first one I bought failed after a couple of years, and the second one produces very erratic readings in wheat.”
Curt Neyens, Minneota, Minn.: “The rebuilt Deere 619 engine block I bought for my 1984 8650 4-WD tractor is absolutely my worst buy in 25 years of farming. I bought the rebuilt engine block with a oneyear limited warranty last October from Truck and Tractor Parts (TTP) Inc., Warsaw, Ind, It cost me $4,972. When we got it, we made sure it was installed properly by a reputable local repair shop that did the job for $2,500. When we got it to the field, the engine blew a head gasket after 84 hours. We had the fuel pump tested, as TTP requested, and found it was operating at specs. We took our tractor back to the local shop and they repaired it for $1,200, a bill TTP agreed to pay. We took it back to the field, and the engine blew another head gasket after only 12 hours of use. This time, we pulled the engine and took it back to TTP in Indiana at our own expense. They gave us another block. We had that put in for $1,026, and got the tractor back just before last Christmas. We'd put about 220 hours on it when it blew a third head gasket in August. “TTP offered to fix or replace the engine block a third time but that meant going through all the hassles we had the second time, and again at our expense. They also offered me $3,000 cash for it but I’ve already sunk $12,000 into this block including a tractor I rented for 84 hours at $42 an hour last fall to finish harvest. So, instead of throwing good money after bad, I'm having a new Deere engine put in. That'll cost $14,000, but will still be better than having to continue to argue with TTP over their rebuilt Deere engine block.”
Doug White, Unity, Sask.: “My 1993 Yardman 12 hp,4-whceel steer riding mower is my best buy. I use it to trim areas where my big mower can’t go. It’s one of the best mowers I've ever used. It cuts tall grass in one pass, is easy on fuel, and tums short, which really helps in tight corners. “I think my 1977 Deutz 100-06 is the best tractor ever built. I’ve owned nine Deutz tractors over the years but none have been as good as this one. It has 7,000 hours on itand has missed only a half day of work since I bought it. I use it with a Deere 6601 pulltype combine. A Deere representative told me the combine was designed to be pulled by a 140 hp tractor and that a 100 hp tractor wouldn't have enough power, but he was wrong. It has only a 104 hp pto rating but is well-matched tothe combine. I’ve harvested up to 400 bu. of barley per hour, Ituses only 3 gal. per hour even pulling the largest loads. They should start building this tractor again.”
Lawrence Erlenbusch, Angela, Mont.: “My Deere 95 combine, which I bought used, is my best buy because it’s casy to service and operate. However, it’s turning into my worst buy because Deere no longer makes parts for it.” James E, Duermeier, Pulaski, Tenn.: “Thirteen years ago! boughtan Echo452VL 16-in. chain saw. It has been a real workhorse. It even survived being run over by a bulldozer. The only parts (other than chains) that have had to be replaced were a plastic gas line and a gas filter. “T'm also impressed with my CattlePro beef cattle records, management and performance analysis software (Bowman Farm Systems, Inc., Rt. 5, Box 25, Cynthiana, Kent. 41031). It’sa great way for beef cattle producers to keep comprehensive records. The computer program is casy to use and covers every type of record that a cowman needs for a successful operation, such as weights and measures, herd inventories, sires, dams, progeny, cow doctoring, pelvic measurements, etc. You decide what records to keep. The bottom line is that Cattle Pro can track a snake across a flat rock. I really like it.” Lloyd Rosborough, Harvey Station, N.B.: “My worst buy is a Case-IH 485 tractor. It has 1,600 hours on it. I’ve installed two new clutches.”
Lacy Hurlocker, Mt. Pleasant, N.C.: “Our 1990 Deere AMT 600 is a best buy. My wife and I use itevery day. No problems so far. wouldn’t want to farm without iL”
Arden Walizer, Loganton, Penn.: “My Miller Pro 235 manure spreader is a worst buy. The bottom, sides, front, and endgate are made from polyurethane and have a lifetime warranty. However, steel or metal is used to hold the endgate together and it has metal beaters and shields which fell apart after a short period of use. Dealers are hard to find and don’t have any parts or parts Best & We ( service. It gives Deere a good run for its money because it’s a good tractor that’s reasonably priced.”
Bill Knoff, Nahotah, Wis.: A 1991 GM dually pickup equipped with an extended cab and 454 cu. in. engine rates as Bill's “best buy”. “I convert all my 454’s to dual fuel LP and gas. One set of spark plugs lasted 88,000 miles. change the oil every 20,000 miles. This 1991 model is a super truck. I putan aluminum flatbed on it which draws a lot of attention. “My Case-IH Magnum 7140 tractor equipped with front wheel assist has excellent comfort, good visibility, and is easy to ( ( service. It gives Deere a good run for its money because it’s a good tractor that’s reasonably priced.”
Arlen Bonde, Kathryn, N. Dak.: Arlen nominates his 1989 Ford TW-35 front wheel assist tractor as his “worst buy”. “Judging by the way they designed the radiator screen, they must have thought this tractor would be driven only on the highway. There are big gaps on the corners of the screen that let in pieces of straw. Also, pieces of straw kicked up by the front tires get sucked in under the fuel tank. On windy days I have to clean out the radiator two or three times. “The air filter design inside the cab is a joke. The filters are secured by small plastic holders, but there’s no way to adjust them to get them tight and so much dirt gets sucked into the cab that it won't stay clean, One of the plastic holders broke, allowing a filter to fall out, and I accidentally drove over it with the tractor. “The engine leaked oil and anti-freeze onto the front wheel assist driveline and made a mess. The seat is poor quality and ripped after only one year. The tractor is underpowered and uses too much fuel. The transmission gears are so close to each other in speed that one third of them are useless. The hydraulic levers are poorly positioned and won’ t stay in their proper settings. The hydraulic system leaks a gallon of oil per day. The tractor was supposed to come with a 3-year warranty, but our dealer wouldn't ninate suys fix anything without charging us for it. The adjustable steering wheel is located so far from the seat that I have to lean over toreach it. If I slide the seat ahead so I can reach the steering wheel, my knees hit the dash, “My Deere 4760 tractor is my best buy. It's rated at only 5 hp more than the Ford TW-35, but it can pull everything 1 mph faster and uses much less fuel. I had a few small problems with it, but my dealer fixed them at no cost. Deere tractors cost more to buy, but at resale you lose twice as much with a Ford. “My Deere 9600 combine is a best buy. It's a quiet machine, and daily maintenance is faster than on any other combine I’ve ever used. We combined all year without any down time.”
Barry Denison, Metcalfe, Ontario: “My 1977 Massey Ferguson tractoris excellent. It has 5,000 hours of everyday use and the powertrain is 100% original. It's a pleasure to drive, has a lot of power for its size, and is easy on fuel. I'd definitely buy another one, “My Deere 111 riding moweris my worst buy. The first year itran likea Deere, cutting our 1/2-acre lawn every week. However, the second year the engine suddenly seized. Our dealer installed a new short block engine for $800, and the company refused to help pay for the cost. One of the dealer mechanics told me this wasn’t the first time this problem had happened. The next year the same thing happened again. We traded it in for a Roper 18 hp model. We're very satisfied with it after two years of use.”
Oscar D. White, Burlington, Iowa: “My 1993 Deere 4255 tractor has only a few hours, but I'm well pleased with it so far. My only complaint is that it idles at 890 to 920 rpm’s. A linkage adjustment was made, but if anything the problem is worse now. I’ve had several Deere tractors over the years and they’re hard to beat. I’m sure some adjustment can be made.” Ronnie Roe, Junction, Ill; “My 1979 Deere 4640 tractor keeps right on going and still works as good as itdid when it was new. My Deere 4020 tractor has over 6,800 hours and is still going strong.”
Delbert Bauersachs, Pinckneyville, Ill.: “T’'m well satisfied with my 1992 Case-IH 7150 tractor. It has 790 hours on it with no problems. It’s easy to handle and the powershift transmission works great. It's fuel efficient and, with well over 215 hp, it'll outperform my Case 2670 in the field, I use itto pull my 1992 Case-TH 496 32-ft. disk in 9th or 10th gear. The disk does a good job leveling and is also a best buy. I also use it to pull my Great Plains 20-ft. no-till drill at 9 to 10 mph. The drill does a super job. planted 6,000 acres with it and had to replace only one press wheel bearing. “I sold my Deere 7000 8-row, 30-in. planter and bought a Kinze 8-row, 30-in. planter. It’s a best buy. The Deere planter was built too light and bearings were always going out. It went through over 25 bearings in three years. The Kinze planter is built heavier so I haven't had any bearing problems in three years. My only complaint is that it doesn’t plant as evenly as the Deere planter. “My 1987 Case-TH 2294 tractor has 2,450 hours with no major problems. And I think my 1991 New Holland TR96 combine is the best combine on the market. It shells up to 1,900 bu. of corn per hour.”
David Williams, Croton, Ontario: “I’ve owned two Deere 4400 combines and found them to be reliable and cost efficient. Ican’t figure out why Deere stopped making them. “My Massey 33 grain drill is my worst buy. Under certain conditions I might as well use a hoe and string to plant.”
Eugene Hagene, Pinckneyville, Ill.: Eugene’s the satisfied owner of a 1992 Hesston 1120 mower-conditioner. “Itnever plugs up no matter if hay is wet or dry. It’s well-built and mows fast.” “Deere made a big mistake when they put the 9600 on the market and they know it.”
Scott Anderson, Coldwater, Mich.: Faced with the chore of mowing two acres of lawn, Scott purchased a 1992 LX 188 riding lawn mower built by Deere. “It has plenty of power and has been trouble-free. The 17 hp liquid-cooled engine runs quiet and smooth. The bagger does a super job.”
Barry H. Dee, Sedgwick, Colo.: Barry mounted his “best buy” Ficklin 4500 gravity wagon box on an old military 6-WD truck (209 West Grant, Onarga, Ill.. 60955). “This grain drill has lived up to our highest expectations.” “We bought it because we needed additional grain-hauling capacity at wheat harvest. The box is slip-coated, and the side unload door can be adjusted precisely for unloading grain into an auger. There's no need to back up or raise a hoist, It’s a beautiful piece of equipment. “I purchased my worst buy New Holland 850 round baler a number of years ago. When first got it, I thought it was the most frustrating piece of junk I ever bought. If you got more than one bale out of 20 made without plugging, you were doing good, I asked dealer after dealer what was wrong, but no one could help. Finally I used a factory service phone number in the operator’s manual to call company headquarters. I was told to move a small block that the tension cable rides on, Now the baler is one of the best tools on my farm. I don’t know the name of the factory rep who helped me, but I want to thank him. I wish Deere had a factory service phone number in its operating manuals.”
Wilbert Milleville, Niagara Falls, N.Y.: “We aren’t biased toward any particular brand of machinery but no matter the color of the machine, it must perform without much trouble,” says Wilbert. “We use Deere, Case-IH, and New Holland equipment side by side. We love our Deere 9500 combine and 347 and 348 balers, our two New Holland self-propelled hay stackers, and our Case-IH swing mower-conditioner. “Our 1990 Double Rake Hitch built by Ernest Steiner of Dalton, Ohio is a best buy, We own two of them and use them to pull four New Holland rakes, The hitch lets us make single windrows of any width or switch to double windrows right from the tractor seat. The maneuverability and rugged design make it an excellent buy.”
S.D. Hays, Steens, Miss.: “My 1990 Krone 151 round baler is a best buy. It’s virtually trouble-free and doesn’t make a lot of dust. It puts up uniform, firm bales that withstand the weather.” Harry J. Duffey M1, Centreville, Md.: “It’s very comfortable and easy to get on and off,” says Harry, pleased with his Massey Ferguson 390-T 4-WD 80 hp tractor equipped with a loader. “Handles better than other 65 hp tractors and can pull just as much as our 105 hp 4-WD Deere. It’s a real utility tractor.”
Charles Gruner, Coldwater, Mich.; “It shifts hard and sometimes it takes two or three tries to get the gear 1 want,” says Charles, who otherwise is pleased with his 1990 White 2-140 tractor, “It has excellent power, lugging ability, and fuel efficiency. My dealerand I discussed filling the 18.4 by 38 radial dual tires, but Lagreed to try it first without filling them to pull my 7-botiom, 18-in. land plow. It handled alright so I never have filled the tires. Itcost $9,000 less than trading for a Deere and $13,000 less than trading for a Case-IH. It has a good range of gears and there have been no oil leaks, fuel line leaks, or fuel gauge or light problems, etc. that have plagued me in the past. Even the air conditioner still works.
Ken Zienstra, Zeeland, Mich.: “My 1990 Case-IH 5120 Maxxum tractor equipped with mechanical front drive can turn shorter than the 2-WD tractor I owned before. The engine is only a 4-cylinder, but it’s very powerful and lugs great. The cab is easy to get on and off. Deere doesn’thave a tractor that can compare to this one. It can pull almost anything I own. I'd never buy another tractor without front wheel drive assist. The 4-speed powershift ransmission is very smooth,”
Todd Bode, Courtland, Minn.: “We paid $5,000 for the mower and have already spent about $700 on parts,” says Todd, unhappy owner of a 1987 Schweiss “zero turn” lawn mower. “This is a dangerous machine. The joystick broke and locked, causing the mower to go into a spin while I was on a hillside, throwing me off and into a telephone pole. I had to replace all of the tires the first year because they were poor quality. I also replaced the solenoid twice, as well as the electric lift switch, the blade on-off switch, the electric clutch for the blades, and the shaft from the motor and bearing that runs the blades. All of the electric parts are Japanese-made, Schweiss Mfg. is supposed to have a one-year warranty , but after lots of arguing and fighting on the phone got one new solenoid out of them, advise anyone buying a new mower to go with a name brand company such as Deere or Toro so the factory will stand behind it. “Another worst buy is my 1989 Ford F150 pickup. The 4-speed transmission went out at 900 miles and again at 1,800 miles. Other than that it’s a nice riding, comfortable pickup.”
Brian Dahmen, Pferz, Minn.: His 489 New Holland haybine and 327 John Deere baler top his “best buy” list. ‘‘The haybine is excellent with its floating head, We have séveral granite chunks sticking out of the ground but it floats right over them. The baler is unstoppable.” Joseph Tymoc, Box 01477, me ‘$600 to $700 and it’s in for 3 to 7 weeks.”
Dale Hull, Ames, Iowa: ‘Our best buy is a series of five publications from Deere & Company covering a Deere 3300 combine which we purchased used and found was in need of maintenance, Anyone who owns Deere equipment, should write to: John Deere Publications Service Center, 1400 Second Ave., Moline, Ill. 61265, and request a copy of ‘‘Service Publications Catalog For Customers'’ CPC 1703 Agricultural Equipment Publications. “The publication has 3 sections, the first covering machines and trac“Anyone who owns Deere equipment should write for these publications.” tors built after 1970, the second covering machines and tractors built before 1970, and the third section listing the publications available covering the fundamentals of service and machine operation. “We ordered a full set of manuals for our 1975 Deere 3300 combine which cost us about $50, We've found we can more than save this amount in time saved when installing new parts or in making adjustments.”
Eugene J. Zachrich, Holgate, Ohio: “One of my best buys is FARM SHOW. Another is a John Deere model TY 2542 string trimmer. “I've put over 350 hours on it and so far, other than fuel, I've only put one new string reel on it.”
L.A. Daily, Norman, Okla.: “I recently bought a new Hesston 666 62-hp. tractor and it’s been fine. The only problem I've had is with the hydraulic couplers which are out of the way and hard to hook up. I replaced them with a set removed from a 4010 John Deere and they work real well. My implements were already equipped with Deere fittings.”
William Brooker, Ottawa, III: “The hydraulic cylinders were so hard to connect and disconnect you needed a big hammer and punch to handle them. It took the company a year before they were fixed right. The company wouldn't acknowledge my complaint even though the dealer knew about the problem," says William, disappointed with his “worst buy” 1982 Deere 4440 tractor. He's pleased with his 1980 and 1984 Oldsmobile Delta 88 autos, both with 8-cyl. engines. “The 1980 has 70,000 miles and gets 23 to 25 mpg. The 1984 has 11,000 miles and gets 21 to 23 mpg. No problems of any kind,” Kirshann Melroe end move grain drill, now known as Lilliston as a best buy. We traded John Deere drills fora Melroe and are happy. The wheel disk and wheel provides better depth control and the built-in end move feature is valuable. Comparing parts prices, the Melroe parts cost 50% of equal Deere parts and last up to eight times as long.”
Louis Krepcik, Filer, Id.: Louis nominates the John Deere concaves for his 6620 combine as ‘worst buy”. “When installing, the fourth holding bolt wouldn’t go in. We removed it again and measured the two sides. There was a %-in. difference in hole dimension and the dealer wouldn't replace it.”
D.C. Graham, Vulcan, Alb.: “I've bought over 20 General Motors trucks since 1955 and only one gave me any trouble. My latest, a 1983 GMC ¥2-ton diesel truck gets 32 mpg and I only had a slight problem with the changeover switch for the fuel tanks. The automatic transmission with overdrive does a lot of shifting when going up hills or into a strong wind because it’s underpowered. But I still like it because of its economy. “I'm also happy with my Deere 4400 tractor. I've had no trouble whatsoever. It burns plenty of fuel but it sure gets the job done. The cab is really something. If was buying 10 new tractors, they'd all be John Deere.”
Richard Spann, Malta, Ill.: “My best buy product is a welding rod — called CB 909 Super Rod — distributed by Mauer Welding Supply, Oskaloosa, lowa 52577. It's fairly expensive but it will weld cast iron, spring steel, and unknown metals with ease. I highly recommend it. “Other good buys are the 8820 Deere combine, which does an excellent job for us, our Westendorf “Hitch and Go” for fast hitching and unhitching wagons from inside tractor cabs, Kelderman Manufacturing toolbar hinge kits for do-ityourself equipment folding and a Woods 214 rotary mower which has mowed over 3,500 acres this year with no major repairs. “Our worst buy recently is a 1979 GMC 7000 grain truck. The engine linate Ea EP oh aL went bad at 14,000 miles and had to be replaced. It always has something wrong with it.”
William Schaefer, Freeburg, Ill.: “They haven't worked since day one,” says William about his pair of “worst buy’’ Regency XL 2000 FM radios. “My dealer has been very good with service but lacks experience. We bought the first radios out of the factory and they have promised to put all the updates in ‘free’. Wish me luck." He's been pleased with a 1981 Deere 853A row crop head bought at an action. “This row head has surpassed all my expectations. It has enabled us to have our fastest yet most efficient harvest to date.”
Alan L. Stevens, Northwood, Iowa: Alan says his 7100 Deere MaxEmerge planter, 4440 Deere tractor and 490 International disk are all “best buys’. ‘The planter does an even job of planting. It’s easy to set and hasn't caused any trouble mechanically. The 4440 has plenty of power and a good quiet cab. The 490 disk pulls easily and doesn't leave ridges in the field.” He had problems with his International 800 Early Riser air planter. “The planter spent too much time sitting at the end of the field getting repaired. The hydraulic system was always going haywire. I never knew which marker would go down, or if the marker would go down or even if whole planter would go down. The planter pulled harder than a 5-bottom plow. The covering discs plugged with trash easily and were always bending, and the sealed bearings must have had grease worms, When everything on the planter worked, it worked good. The dealer gave excellent service and International extended the warranty on early models one year. But after all the problems, it was time to trade.”
Robert Gannon, Mabton, Wash.: “The hydraulic front assist makes it a tractor with a tremendous pulling power. Aside from a small leak in the front wheel power assist, there's been no trouble. Dealer support has been good,” says Robert, pleased with his Deere 4440 tractor.
Larry Kitz, Two Hills, Alberta: “Our recent purchase of another Deere 8820 Titan combine is definitely our best buy,” says Larry, ‘We “Harvest quality is second to none. Really impressive.” have had little or no downtime and harvesting quality is second to none. Adjusting is simple and easy, and fuel efficiency really impressive.” On the “minus” side, Larry lists his Deere 665 central metering seeder. ‘I wouldn't really term the air seeder as the worst buy but it has been giving us difficulty. If it wasn't for the excellent service, we would really be left out in the cold. The problem is excessive wear on the flow lines and hoses. We were told by Deere that longer wearing parts are being studied, but our warranty has now expired and we are faced with unreasonable expenses, It’s great, however, to have a dealer who understands and helps us get results from Deere & Co."
Lynford M. Miller, Doniphan, Mo.: “Our Deere 116 hydrostatic riding lawn mower, bought new last spring, is easy to drive, Its hydrostatic drive and short turning radius helps reduce hand trimming in our orchard and makes mowing a breeze. Great power from the 16 hp. engine to mow the tallest of grasses. It replaces a 110 Deere mower that was purchased new in 1967 and is still in fair condition. “Our 146 Deere loader, bought last spring for our Deere 2640 tractor, is also a good buy. It has great lifting capacity and does a great job stacking round bales in our barn. It’s easy to put on and take off the tractor.”
Francis Burch, Lester Prairie, Minn: “It has the comfort of a car,” says Francis, pleased with his 1983 Deere 2950 tractor with a Sound Gard cab. “It’s very easy to shift, easy to steer, stays on course and the power is comparable to the Deere 4020, It's economical on fuel, and is easy to enter and exit, and has a very comfortable seat.”
Charles Heinz, Dawson, Iowa: ‘If you own a Deere Max-Emerge planter, you'll find that you have to replace the bearings in the press wheels. They're held together with allen head screws and are nearly impossible to remove with a wrench. A mechanic loosened them for me the first time with an impact wrench so I went out and bought myself one. It's now my best buy for loosening screws and nuts. “We also made a good buy in 1973 when we bought our Mercury Montego MX. It has over 100,000 miles on it. I've never had to replace any belts, or the exhaust system, and it still has the original brakes. We just buy new tires once in a while and keep driving.” David E, Lewton, Weaubleau, Mo.: _ “Our best buy is our 1975 4430 Deere tractor, It had the best cab and performance when it was new and it's still hard to beat,” says David. He names his 1981 Allis Chalmers Gleaner N-6 with a 20-ft. flex platform as ‘worst buy". “It has all the options, cost over $125,000 and is definitely for the big farmer. He is the only one that can afford all the down time, production losses, crop losses and income loss that the N-Series Gleaners cause. This combine occasionally shows awesome performance — on one very low humidity day we cut 40 to 50 bu. wheat at 6 to 7 mph. — but most of our time is spent fixing up after poor workmanship and engineering.”
Dana Sauer, Paxton, IIL: ‘My best buys are the entire line of Deere equipment my brother and I use in our farming operation, including 4440 and 4640 tractors, a 7720 combine, a 7000 Max-Emerge planter and other Deere products too numerous to mention. Deere manufactures quality farm equipment that is dependable, productive, human engineered and designed with the current demands of agriculture, and the interests of farmers, in mind. The company is backed by a strong network of dealers. “Our worst buy is a Kawasaki KLT-200 3-wheeler. I traded a Honda 90 ATC for the KLT-200, which had carburetion problems that were never resolved to my satisfaction. It rode rough and handled poorly. I traded the Kawasaki for a new Honda 185-S “Tt rode rough and handled poorly.” ATC. The 185 is an excellent machine.”
Bill Orr Jr., Council Bluffs, lowa: "I like the increased ground speed I get on sidehills but I especially like the way the cutterbar can be adjusted to stay flush with the ground on slopes,’ says Bill, pleased with his Deere sidehill combine. He's unhappy with his “Midwest Busterbar harrow. It's always falling apart. If you lower the harrow so it works good, it will get bent out of shape."
Mike Scanlon, Oskaloosa, Iowa: His ‘‘best buy” is his New Holland 855 baler. ‘It makes a lot heavier and denser bale than the old 851 baler. like the heavier apron chain, automatic chain oiler, 6-bar hay pickup and the roller in the bottom that replaces floor chains. It also takes less power to operate than the old one. A well-built, dependable easy-tooperate machine.” Mike's disappointed, however, with his Deere grease gun. “It works good if you can get it started after changing cartridges. tried several different kinds of grease in it and it makes no difference. Usually, after five minutes and a big mess, it starts working. Maybe it needs a bigger valve to bleed the air out.”
James Tostenson, Pine River, Wis.: He's disappointed with his Stihl AV-031 chain saw with electronic ignition. “It starts hard, doesn't have the zip it should have, and constantly needs something fixed or replaced. It's not worth the premium price you pay for the name." James nominates his old Deere Model A tractor with a ‘‘Power Block” as ‘‘best buy”. “I bought the tractor used a couple years ago and, considering it was over 30 years old, it performed like new. It has very good power for a smaller type tractor and uses less fuel than I expected it to. would recommend a Power Block to anyone who needs a re placement block on an older John Deere.”
Stan Stefanik, Forest, Ont.: He's happy with his Tiger Jaws cutterbar bought from the Herschel Corp., 1301 North 14th St., Indianola, lowa 50125. We puta Tiger Jaws cutterbar on our Deere 6620 combine and increased our field speed to 6 mph. We also increased the capacity and kept our header losses down. The knife stays sharp much longer. We only broke one guard and two sections last fall. We're very satisfied.”
James E. Shelton, Blodgett, Mo.: ; “My best buy is an International 2 +2 3788 tractor. “We've had very good performance with this tractor. Has plenty of power and is easy to handle. Fuel consumption is satisfactory and it's fairly easy to work on." James reports trouble with his Deere 709 rotary cutter. ‘This cutter will not cut grass and weeds. It hacks them off instead, even though the blades are sharp. We've also twisted five pto shafts and cannot find the reason why. The slip clutch works well but the shafts still twist.”
Brad Black, Vonore, Tenn.: ‘We like the ease of handling and the power of our Deere 4440,” says Brad. “It has much more power and uses less fuel than the 4240 itreplaced. We really like the power shift transmission and the hydra-cushioned seat suspension. “FARM SHOW Magazine is also a best buy. It's very informative and to the point. We enjoy the Best and Worst Buys section. “We're also pleased with our Honda 200E ATC 3-wheel cycle. Everyone enjoys riding it. We use it to check crops, cattle and just about anything else you can think of. It makes weed and insect scouting easier and a whole lot more fun. The only thing should have done is bought one sooner. It's definitely a best buy.” On the minus side, Brad is disappointed with his Parmi 8-hp. rear tine liller. “Both transmissions have been replaced, it's hard to start and, once started, it won't run for more than 5 minutes at a time. It's very hard to control and the belts are impossible to keep adjusted. This tiller is truly a piece of junk!"
Vance Stiles, Spring Hill, Kan.: “It's much simpler and easier to service than the Deere 6600 it replaced,” says Vance, pleased with his ‘‘best buy” 1982 International 1460 rotary combine. “It's a dream to drive and has tremendous capacity, Has just half the belts and chains of the Deere. Good dealer service. The only thing they haven't got working yet is an automatic reel speed, but they'll get ate” Vance has had some trouble with his International 183 6-row 30-in. Vibrashank cultivator. “It does a good job and has been mostly trouble-free except that the rolling guide fins do not have enough ground clearance in the transport position. This causes gouging on turn rows and we have broken several guide blades. No one has come up witha solution. A little redesigning is in order here.”
Hap Holowach, Cambridge Springs, Penn: “My worst buy is a Deere 336 baler with hydraulic ejector,” reports Hap. ‘From the beginning, the 336 has beena piece of junk. The bale kicker never has worked properly and won't reset after kicking a bale out. The baler also shears flywheel bolts at the rate of one every 500 bales.”
Ronnie Clark, Albia, lowa: ‘My worst buy is a 4640 Deere tractor with front wheel assist. bought it used with 1,700 hours on it. When it runs it runs great and is good on fuel. My problem areas have been the alternator, batteries, oil leaks, radiator leaks, a second alternator, pto, the quad range transmission, snap rings, and the water pump. Also, the front wheel assist is disappointing because it doesn’t pull like I want it to. Six months after I rebuilt the water pump, the Deere dealer told me he had a much better pump. It was a factory update and wouldn't cost me “T lost a valuable week of my time” ‘ a thing. only ran the tractor 20 hours with the new pump before the fan came off and went clear through the radiator. There were three other 4640's with fans in their radiators in this area. Deere paid for everything — pump, fan, pulley, shroud, radiator, anti-freeze and a semi to haul the tractor to town. But I lost a valuable week of my time.
Marion R. Miller, St. John, Kan.: “We bought a new 224W Deere square baler in 1972. It performed so well through the years we bought a new 1983 Deere 347 square baler this year. It’s doing a perfect job, Compared to two other brand name balers we have used, the Deere makes a better, more compact bale. That's important because we use a 1974 New Holland 1049 stack wagon to pick up bales and the more compact, the easier they are to pick up," says Marion.
Roger E. Mackey, Caldwell, Idaho: “My 1979 model 5460 Deere selfpropelled chopper was my worst buy at delivery but has become after lots of work, a dependable machine,” says Roger. ‘“‘When the chopper was delivered it wasn’t ready for work. The rpm's wouldn't go over 2000 and with a load on it would drop to about 1800. The injectors leaked. It had hydraulic leaks everywhere which fi nally ruined the brakes on one side. The knife sharpening assembly was put together in such a way that it would sharpen the knives unevenly, And the most ‘important’ working part of the chopper, the air conditioner, was never hooked up. After a year of working out the bugs, the chopper turned out to be a fine piece of equipment.” Roger’s ‘‘best buy” is his 1981 International 5000 windrower. “It has a 16-ft. header that makes a nice even windrow. It has never given me any trouble other than the starter safety switches on it. If everything is not in just the proper position, it will not start. And, sometimes even when everything is in the right order, it won't start."
Dennis Hoffman, Wilmont, Minn.: “Our worst buy is our Deere 1450 5-18 plow,” reports Dennis. “It won't hold its depth at the back — goes up and down. You have to watch it every minute,” On the “best buy” side, Dennis lists his Deere 4320 tractor. ‘It now has 5,300 hours on it and has had nothing but regular service. It doesn't use any oil yet and has good power. In the winter I use it for custom snow blowing so it is used year around.” S.D. Chaney, Jr., Canton, Miss.: He's happy with his Gallagher/Snell Energizer for electric fences. “The Snell Energizer is perfect for permanent cross fencing. It uses less voltage and high amperage in short pulses to “charge” my fence wire. I built a mile of fence for less than one-half the cost of barbed wire and, surprisingly, wet weeds or grass do not short it out. We built the fence in one Saturday morning.” He names his Deere 310 14-ft. disk as ‘worst buy”. “It gutted my 160 hp. tractor because it wouldn't cut level. I'm just disgusted with it.”
Lowell T. Merrill, Grantsville, Md: He nominates his 6600 Deere sidehill combine as “best buy”. “I can operate the combine day after day witha minimal amount of down time. The sidehill is a real grain saver on hills in this area.”
Neil Bateman, Mansfield, Ill.: “My best buys have been my Deere 4630 and 4230 tractors. Outside of routine maintenance, the only thing have had to replace is an injector line and two alternators in over 3,000 hours of work."
Stephen Harlow, Gainesville, Tex: ‘My International 55 3-pt, 13shank chisel plow is a best buy. It pulls straight and level and leaves the ground loose and even. My New Holland 1114 self-propelled windrower is also a best buy. It handles well, and the cab and air conditioner are great. It does a nice job of cutting hay and grain. Workmanship and quality are very good. My 8300 Deere grain drill with 26 double disk openers and press wheels, produces excellent stands of grain and hay, The 36-bu. box and 13-ft. working width cover a lot of ground. “One bad buy was a Modern brand pasture mower. The blades are flat and don’t lift up grass and weeds that the tractor tires run over, which results in streaks.”’
Wayne Sullivan, Kevil, Ky.: “It does a good job placing the seed under all conditions, whether the ground is wet and muddy or dry and hard. Very pleased with its performance,” says Wayne about his Deere 7100 Max-Emerge 10-row planter.
Clark Phillips, Angola, N.Y.: “Our best buy is our Deere 4430 tractor, We bought it used and have put over 3,000 hours on it. Besides a starter repair and new rear tires, we have yet to do a repair on it. “In contrast, a worst buy is our International 1466 tractor, Bought new, we installed two new main clutches, two pto clutches, two TA's, had two engine overhauls and replaced one injection pump, without getting 3,000 hours on it. The last two years we owned it, it didn’t operate even 100 hours because it was down so much.”
Dale Hansen, Burlington, Colo.: He’s pleased with the Yetter planter units that fit his Cyclo International planter. “The units are a little overpriced and don't work in the wet soils without the Deere gauge wheels, but we have the best stand of grain sorghum ever. People at the factory were very willing to talk about the wet soil conditions and try to solve the problems."
Dan Bearss, Springfield, Ontario: “We planted 1,600 acres with virtually no problems other than one insecticide change-off sprocket,” says Dan, pleased with his Deere 6-row, 7000 planter. “We're also happy with our International 915 combine. It's been virtually trouble free.” He's had trouble with his 820 International flexhead for his 915 In- ternational combine. ‘It works perfect when the ground is dry. However, after a rain, when the ground is sticky, the dirt builds,up under the sensing pads."’
Kerry W. Dwyer, Northfield, Minn: ‘My worst buy is a 1982 ¥2-ton 4-WD Silverado Chevrolet pickup with a 6.2 liter excuse for an engine,” says Kerry. ‘The truck itself is not totally bad, only the power train. In 16 months of use and 37,000 miles, I have rebuilt the injector pump at 10,000 miles, replaced two sets of self-locking hubs, replaced two sets of front axles, replaced four of eight injectors at $32 a piece and had a factory recall on the transmission. The front axle problems — both the inner and outer — were caused by the hubs. When only one hub engages, one axle stub spins in each direction, When the other catches, it twists yokes otf where the inner and outer axle join. When the dealer did factory work on the transmission, he forgot to tighten the bell housing to the motor and [ lost half the bolts on the highway. have spent $600 of my own money over and above warranty work to make this truck run, not counting labor. In addition, lam not able to get any better than a consistent 12 mpg. I've tried many service departments in this area and nobody can help. paid top dollar for this unit — $15,000 — and now the dealer will only allow me $8,000 for it.” C.M. Lamascus, Jr., Schulenburg, Tex.: He lists his Deere 215 disc harrow with 22-in. cutaway discs as “best buy.” “It goes easily through wet, heavy soil and trash presents no problem. It leaves the land level and, with a furrow filler kit, leaves no ridges.”
Larry Downham, Galveston, Ind.: He’s happy with his Deere 7000 conservation Max Emerge planter. ‘‘We put this planter through its paces in some of the roughest no-till conditions going and it performed like a real champ. We equipped it with deep placement fertilizer shoes that worked real well. The dealer was very helpful in getting it started and we had very little trouble all season.” Gerald E. Bane, Patoka, Ind. ‘This has been the most dependable pickup I have ever owned. It's very easy on fuel and the only expense I’ve had is for regular maintenance. The whole family thinks it’s fun and easy to drive,"’ says Gerald about his ‘best buy” 4-WD Chevrolet Luv pickup. He had trouble with his International 4-row Cyclo corn planter, “1 had to put a new gauge for air pressure on the hopper every year and it had very uneven spacing. I ran it three years and traded. The only good thing was having just one hopper for seed.”
Jim Dechant, Fairview, Alberta: His “best buy” is his Deere 850 tractor with a 40-in. rototiller, a Deere blade and gyromower, ‘The 22 hp. tractor is a perfect small acreage machine. Its diesel 3-cyl. engine uses 2 gal. per hour or less and is perfectly matched for tilling, mowing and blading. The tractor starts well in winter for snow removal and has given us no trouble. We intend to add to our line of John Deere implements for it.” “It’s impossible to stay cool in it in the summer.” On the minus side, he’s unhappy with the summer ventilation in his Buick Skylark. “While we are generally satisfied with our '80 Buick, it is impossible to stay cool in it in the summer. Even when it’s not that hot out we still suffocate in the heat. Trips to our dealer have made the heater worse instead of better.”
Andrew Kember, Sarnia, Ont.: “Our nightmare began four years ago when we bought an Allis Chalmers N-6 combine,” says Andrew. ‘‘Whata lemon! That machine was built to break down. Whey they came to sell us onit, it was the new wonder rotary combine with capacity, simplicity, ease of handling, and so on. That was absolutely false advertising. In three ‘“‘What a lemon! That machine was built to break down.” years we only had two days without breakdowns. I could have had my crops off faster with my old Gleaner M. The front conveyor wrapped bean stubble on the back drive, the front conveyor adjust always broke and would knock the chain off and plug up. The stone trap is located a ¥% day journey up into the middle of the combine and needs special wrenches to adjust and get foreign material out. The steering puts you in the ditch at over 12 mph. The engine uses 10 to 12 gal. per hour. The throttle lever should have a 3-in. hydraulic ram on it for speed adjustments. The unloading auger fell off six times. Cheap and light material was used for construction throughout this machine, Even the dealership gave up on this junker because not even the best mechanics could keep it running. “Allis Chalmers owes every owner Best And Wo of the first N-series combines a big public apology for their mistake in marketing this machine too early plus compensation for down time and a trade-in allowance. We traded last summer for a Gleaner L-2 and it did a super job in comparison to the N-6." One of Andrew's “best buys” was his Kinze 800 grain buggy. “It's super well-built and not skimpy on steel like so many products today. It's made to last 20 years. Works well and its big size sure speeds up harvest as we can get 30% more out of the combine. We only need one truck and this wagon to keep up with a 1,200 bu. per hour combine. “Another good buy is our Deere 7000 Max Emerge planter, We've planted 3,500 acres in two years with excellent service. It did what it was advertised to do with excellent seed placement and depth control. Seed was covered well in adverse conditions and in heavy clay soils. One complaint is that the markers don't fold quickly out on hilly ground and when they are folded up, they are too far out from the end of the planter and dangerous along fences.”
Don Zelt, Gladwin, Mich.: “Runs smooth and quiet. Trouble free and simple to change from swath to windrow,” says Don about his New Holland 489 haybine. He's not satisfied with his Deere 336 baler. “It runs and ties well but I'm disappointed with the capacity. The bale length varies too much when in heavy use. It’s also unnecessarily hard to service.”
Allen Hoffman, Northumberland, Penn: Allen's happy with his 1982 Ford 540-A industrial-type tractor with front-end loader. ‘‘I really like its shuttle-type power reversing. the single handle hydraulic level for the loadeér, the quickness of the action of the bucket, the good brakes and the comfortable seat with all controls in easy reach. The gas pedal makes it great for easing around posts, which is handy for us as it’s primarily used for cleaning out broiler houses and loading manure on trucks. Also, if starts easier in cold weather than expected for a diesel. Industrial units are a good buy, feel, because they're built better than normal farm loader tractors.” Paul and Brad Dangberg, Wayne, Neb.: The “best buys” are their Deere 200 stacker and Deere 454 row crop bean head mounted with a Bish adaptor on their TR70 New Holland combine. ‘Upkeep on the stacker has been minimal and dealer service is excellent. The bean head does an excellent job on down and tangled beans and the combine’s twin rotor does exceptional work, Grain is cleaned with few cracks and fines.” The Dangberg’s are unhappy with their International 4166 4-WD tractor. “It's given us nothing but trouble, including the transfer case, the top bearing in the transmission, the hydraulic pump and the fuel tank — everything but major engine trouble. It has logged more shop hours than field time. We've spent more than $4,000 on repairs in 400 hrs. The local dealer tried to maintain it but it fell apart faster than he could get it repaired, We'd like another 4-WD but it won't be red,”
Kevin Lapka, Leola, S.Dak.: My worst buy is a Goodyear Truck Tarp that has been advertised recently in several national farm magazines. The 6-week delivery took over three months and the wrong size was sent. The phone number in the ad was disconnected, The quality is so poor it's not worth talking about.” “The quality is so poor it’s not worth talking about.” He says his 3-pt. mounted Danuser post driver was a good buy. ‘The post driver uses a free-falling weight rather than a spring-loaded hammer. This makes it smooth operating, along with the fact that it will drive almost anything.” Kevin's also pleased with his Deere 4240. “It was hard to give up the 4020 that the 4240 replaced but, up to this point, it has more than filled the shoes of the old reliable 4020."
Edward Hedges, Harrow, Ont.: “'I would like to nominate Honda's 21-in. self-propelled lawn mower asa worst buy,” says Edward. ‘I have never seen a machine so ill-prepared for the job it is designed to do. It's nearly always broken down. During the last three summers it has not cut a total -of one year's worth of grass. Parts take months to get and Honda will not stand behind it. In fact, they won't even answer my letters. “On the ‘best buy’ side I would like to nominate my Deere 2130 tractor. It's handy on large and small jobs, easy on fuel and no problem whatsoever.”
Leo Mugan, Cascade, Wis.: Heading his ‘‘worst buy” list is his Deere 15¥%-ft. 1000 field cultivator. ‘The rock shaft is not strong enough and the cultivator actually bounces on it. The only way to stop the bouncing is to stop the tractor and start out again, ‘The company rep was not very helpful. even though offered to pay the welding costs if he would give me the needed supports, but he didn’t want to re-do the engineer's work, That might be a good idea though, if the engineers don't do their homework.”
Delbert L. Kalkwarf, Parkersburg, Iowa: ‘“‘Deere's test farm must be a waste of money if they put junk like this on the market,’ says Delbert, upset with his Deere 220 disk. “It won't run level from front to back or side to side, Deere has recalled it twice for modifications.” On the plus side, he’s pleased with his Auger Dolly from Top Air Mfg., Parkersburg, Iowa. ‘For an inexpensive item, the Auger Dolly can't be beat. It makes moving and hooking up my 56 and 61 ft. grain augers very easy. Adding that third wheel sure makes it easy for one person to move an auger by hand. Truly a back anc wife saver.”
James O'Connor, Blooming Prairie, Minn: ‘‘My father bought an Allis Chalmers N-6 combine in 1980," says James. “It was a total disaster. Everything that could go wrong, did. Allis Chalmers convinced him to trade for an updated N-7 Gleaner but even with that machine you were lucky if you made it to the field without breaking down. He has since traded that machine, too, and happy with his new 7720 Deere. “My own worst buy was some miscellaneous foreign tools I bought with price in mind. I got my money's worth, used a 14-in, pipe wrench for the first time and broke the jaw right off. wish the U.S. would quit importing such garbage.” His “best buy” is his 1981 Mercury Capri. “It gives me an excellent ride and gets 35 to 40 mpg. under loaded conditions. Not at all like the foreign imports that are ruining the economy.”
Edward Krizan, Harrow, Ontario: He's happy with his Deere 7720 combine with a 220 grain head outfitted with a Tiger Jaw cutterbar. ‘‘Productivity is the key word here. With the Tiger Jaws cutterbar we can increase our speed in beans without shattering the beans out of the pods. Excellent cleaning and fast unloading time. Operator comfort is above superior standards. This combine handles grain like no other, Can't see where they can make it any better in quality.”
Frank J. Zieser, Walker, lowa: His “best buy” is a Keldermann manual fold hinge for his Deere 7000 Max Exerge 12-row planter from Kelderman Mfg., Inc. Oskaloosa, Iowa. ‘‘It works great because one man can be ready for road travel in about five minutes without unhitching from the planter, and the unit costs much less than the Deere hydraulic fold system. “Another good buy was our Stormor 24-ft. Ezee Dry drying bin, For the past eight seasons our Stormor has done an excellent job with very little repair.”
Charles Gaffney, Minneota, Minn.: “Our Sukup 4-Way II dryer, purchased in 1981, was our worst buy,” says Charles. “That season we could not dry corn for more than 24 hours without a breakdown of bearings. shafts, or augers. And, it dried unevenly. It was really a nightmare. guess they were experimenting on the farm. This past year Sukup replaced faulty parts and made some changes and the results were nonstop drying.” On the “best buy” side, he’s happy with his Deere 6620 Hydro combine, “This piece of equipment has been excellent. Workmanship and quality control are great and we harvested over 1,200 acres of corn, soybeans and wheat without a single breakdown. Dealer service is excellent. This machine has high capacity with a 6-row cornhead and a 20-ft. flex head."
Art Walz, Luana, Iowa: ‘Can the same combine model be both a best and a worst buy?" asks Art, who “Everything but the engine broke or was loose on this machine.” bought both a 1979 and a 1981 Deere 6620 sidehill combine. ‘The 1979 model was built just before the strike in late 1979. Everything except the engine broke or was loose on this machine. averaged 13.7 acres per day for 51 days with a brand new machine when we should have averaged 40 or more. My dealer did all he could for me. “I traded that machine for another 6620 sidehill in 1981 and it was the opposite of the older model. Very enjoyable and has caused little trouble. Anvone who thinks the selfleveling feature is not necessary on contoured fields like we have in Northeast lowa has never run one or seen it work.”
Bob Wroten, Jordan Valley, Ore.: “I've had terrible experiences with odd-size Deere parts, forcing me to buy from Deere, which is always priced 30 to 120% higher. During haying or feeding, we'd have to wait for a Deere part to come from the other side of the nation, I've come to hate the color green. The parts were mainly belts, bearings and hydraulic cylinder components for a 200 stack wagon and a 230 shredder feeder. “Our best buy is a 5-bale moverfeeder made by ACME Manufacturing of Filer, Ind. We used it to transport and line up 1,200 to 1.500 tons of round bales in the summer and feed them out in the winter. It's the best feeder we've used in the winter because of its simple design. Its 5-bale capacity allows us to feed large Best And Wo bunches of cows by scattering hay far enough to alIowall the cattle to eat. The company has been the best I've ever dealt with, in understanding their product and standing behind it. “Another good buy is our Hot Shot Power Mite made by Hot Shot Products, Savage, Minn. We have used many hot shots but none have lasted as long as these. They are light, compact and fit easily in your hand. After use on several thousand cattle, we haven't had one malfunction and they're powerful enough to get the animal's attention, yet mild enough not to bruise the meat."
Dallas F. Boge, Gales Creek, Ore.: His ‘worst buy" is his Deere 317 tractor. ‘The engine seized after 20 to 30 hours. The dealer replaced it 50-50. The steering gets loose and requires constant adjustment. like the hydrostatic transmission, however, which works well mowing and rototilling 19 acres of Christmas trees.” “The steering gets loose and requires constant adjustment.” “best buy’. ‘Very useful. I read it cover to cover as soon as il arrives,”
Loren Fulford, Largo, Ind.: “This unit will not work for 12 hours without a malfunction of some type. We have replaced gears, augers, switches and pins but it is junk and we finally quit using it,’’ says Loren, disappointed with his Sukup heavy- uty 3-drop grain stirrer. He’s happy, however, with his Deere 140 lawn tractor, “Before the 140, had a Deere 112 which I bought new and used for 8 years with no problems. The 140 is also working out great.”
Frank Nenninger, Laurens, N.Y.: Heading his ‘best buy” list is his Deere 3960 forage harvester. "A good, capable machine that's easy to change from corn to haylage. Like the electra-hydraulic controls.”
Fillard Tolle, Otway, Ohio: “We bought our Long tractor for half what a John Deere or Ford would have cost,” said Fillard, pleased with his 42 hp Long 460. “It has everything on it and the steering is the best we have ever seen. I believe it runs cheaper than any tractor its size.”’
Herman Kristein, Raymore, Sask.: “My worst buy is my Massey Ferguson 2705 tractor. After only 30 hours it started losing power and then sat in the shop 2 months waiting for parts for the injector pump. After that it started to use oil, a rear axle broke while cultivating a level field, the turbo charger went out, the power brakes quit, and the air conditioner wouldn't work. put up with this for 837 hours. During the last four hours I owned it it used a gallon of oil. My dealer was the best you could ever ask for and always gave mea replacement to use. “On the plus side, now have a 4440 Deere with over 1,000 hrs. on it. Runs perfect with lots of power and comfort. A pleasure to work with."
Dan Hyrich, Belmont, Man.: ‘‘I'm very disappointed with my New Holland bale wagon and baler. They're just built too light and, although they do a nice job, they have too much downtime. “But I'm pleased with my Deere 6620 combine. It’s easy to service, trouble free and an unbelievable pleasure to operate. Am so pleased with my Deere 4640 and 4440 tractors. They're easy on fuel and have great comfort.”
Floyd Hasstedt, Piqua, Kan.: He's been pleased with his 1980 International 1086 tractor. ‘Except for some delay in getting things done under warranty, this has been a good tractor. It uses 6 gal. per hour of fuel where the 4230 Deere I traded off used 7¥2 gal. under load. This summer, planting with a 12-row planter, it used about 3 gal. per hour. The Deere 4230 never used less than 44 to 5 gal. per hour under light loads. It also starts well.”’
Art Walz, Luana, Iowa: *‘After furnaces that install outside the house, we bought a Sure Flame 2000 furnace from Sure Flame Co., Huntington, Ind. There's no fire danger, dirt, or smoke inside the house. Temperature control is very constant, never varying more than 1° above or below the thermostat setting. It burns green wood without danger of chimney fire. Since installing this unit we have burned no LP gas in our regular furnace and the Sure Flame burns everything from old boards to bags of twine. With good firewood, it holds fire easily for 10 to 12 hours. “Another of my best buys is my Deere 8640 tractor. It's very easy to handle, rides good and has lots of power. Deere has been outstanding in updating these tractors to new specs at no cost to owners. know of no other company that takes responsibility for their products as Deere does.”
Glenn Baker, Edgerton, Minn.: He nominates his Deere 2700 pIowas “best buy”. “It has excellent clearance — never plugged once in heavy corn stalk residue,” Also on the plus side, Glenn likes his Bradford gravity box with a 10ton gear, “It cleans out completely and is well-built but the adjustable tongue is a joke. It only moves 4 to 5 in. so we had to redo it. Also, the sliding gate bent after the first 10 loads.”
Elton Zimmerman, Buffalo, Mo.: He's disappointed with “Golden Harvest Si-Gro 400 forage sorghum. We lost most of it due to lodging of its too-thin stalks.” On the plus side, he names the non-clog cutterbar on his Deere 1209 mower-conditioner as ‘‘best buy” “Cut through just about anything. cut through wet clover and thick matted fescue and it never clogs up."
Dale L. Hekrdle, Stanton, Neb.: My Deere 4440 has lots of power and a great cab. My 6620 Deere combine with hydrostatic drive is quick to service and simple to adjust. It has plenty of power and capacity, and isa “Welds and seams are cracking on the box.” joy to operate. I've had little downtime or problems with any of my Deere products.” On the minus side, he's had trouble with his ‘Dakon gravity box. The welds and seams are breaking and cracking on the box. Very poor construction.”
Bob Burns, Allison, lowa: ‘‘We bought a new 4440 Deere last June and like it real well,” says Bob. “Has a quiet cab, good gear range, is small enough for jobs around the farm and ‘Worst’ Buys n previous page) big enough for what pull in the fields. Have had good company and dealer follow-through.”
Har J. Saathoff, Gibson City, Ill.: “I've had tractors of many colors but these are by far the best,’’ says Harm, pleased with his ‘best buy” Deere 4430 and 4420 tractors. “Easy to oprate for long periods of time, they're top quality machines. No down time and excellent dealer service. “Another best buy is our T.R.S. 80 Radio Shack computer. It's a great time saver and a money maker for us.”
Tim Huddleston, Snyder, Tex.: “My worst buy story happened about three years ago. I had a 1566 International tractor and at 900 hours it had already cost us $15,000 in repairs and a near crop miss. IH wouldn't stand behind it. The dealer and TH don't have to worry about us anymore. “My best buy ever is a 4640 Deere tractor. It has 3,400 hrs. on it. The only item it was ever in the shop for was a water pump kit modification that Deere did free 3 months ago.”
Brad Olsen, Morrin, Alberta: ‘‘ bought a 1/3 hp. Monarch submersible automatic sump pump which has to be my worst buy,” says Brad. ‘In less than 8 months the pump conked out. It was repaired on warranty with no questions asked but it took 8 to 10 weeks. Meanwhile, had to improvise to keep our ceptic tank from overflowing. When I finally got the pump back, it only worked for 6 to 8 months before the pump conked out again. By this time, the pump was out of warranty and I've had no luck in getting any compensation from the company.” He lists both his Deere 450 trail type hay mower and his Deere 336 hay baler as “best buys”. “I bought my mower in July of 1980 and have had no problems at all. In October of 1980 I bought my baler and, in the first month and a half I owned it, I custom-baled 45,000 bales with absolutely no problems. It never missed tying a single bale in the first 5,000 bales, Now, with close to 90,000 bales through it, I feel Deere must have the best square baler on the market."’
Theodore Redick, Cridersville, Ohio: “FARM SHOW is my best buy,” says Theodore. “There are lots of good ideas in the magazine we can use. ‘Another good buy is Deere'’s 1710 mulch tiller. have used it two seasons and find it to be a well-built machine that works well in all kinds of crops. No plugging in heavy cornstalks after the picker or sheller. The ground does not wash away in the winter and dries out faster in the spring. We don't use a pIowanymore.”
Oland McCain, Laurel Hill, Fla.: “We've had very disappointing experiences with Ford hay equipment. It's built lighter and not as well as Deere or New Holland. Would not recommend it to anyone," says Oland. On the plus side, he’s had good luck with his Kuhn disc mower and Butler Agri-building. “The mower cuts very clean through even thick coastal Bermuda grass, even when the grass is wet. Appears to be well engineered and built.”’
Paul W. Humphrey, Boonville, Mo: “Your magazine doesn't have enough space to list all the problems we've had with this car. If Chrysler builds all their products like this one, it’s little wonder they are nearly out of business,’’ says Paul, about his “worst buy’’ 1980 Chrysler New Yorker, On the plus side, he adds that, “We're pleased with our 8300 Deere grain/soybean drill. On the 900 acres of beans and wheat we planted last year, we had perfect stands. Depth control and metering capabilities are great.” Benton M. Trundle, Jr., Sevierville, Tenn.: His ‘‘best buy” is a 1981 GMC C6P heavy duty % ton pickup, “This truck has performed very well for me. It rides as comfortably as a car and drives well on long trips. I purchased a lifting tailgate for it that also performs well. It sure saves a lot of lifting of drums and equipment.” “Another good buy is a liquid fertilizer applicator from R.M. Distributors of Vail, lowa, for my 4-row corn planter. At under $300, it adapts to any planter and can apply as little as 2 gal. on up per acre. My Deere Backpack Blower was also a good buy.”
Jack Bonnette, Marietta, Ohio: “We looked closely at several round balers and were most impressed with the quality and ruggedness of this baler,” says Jack, about his Vermeer 504G baler. ‘‘When we first baled with the machine we found it was simple to handle and it operated as if we had used it before. Our hay is of excellent quality and our cows eat all of it. “Another good buy was our Deere 1207 mower-conditioner. We used it last summer and have only had to sharpen the sickle so far. Runs extremely quiet and is easily transported from one farm to another.” On the negative side, Jack's disappointed with replacement parts for his International tractor. “We spenta large sum of money and down time to install a new torque amplifier system in our International and it lasted approximately 50 hrs. before going out because of bad bearings.
LeRoy Fulk, Assumption, IIL: “We've had good luck with two John Deere 7720 combines purchased in 1981. Plenty of capacity and the cabs are quiet. Other than daily maintenance and adjusting we have had very little down time. This is our second pair of Deere combines. We have a good John Deere dealer for parts and service. No comparison to the service and parts on previous makes of combines.”
Marv Andrijeski, McCook, Neb.: “Couldn't farm without one,” says Marv, happy with his Yamaha 200 3-wheeler. “It's especially handy for checking irrigation. We're also pleased with our 4400 Deere combine and our 4430 Deere tractor, We bought them both used and haven't had any major trouble with either one.”
John M. Gabriel, Belle Plaine, Sask: ‘A tractor is only as gocd as the service you get with it and the dealer we bought this tractor from was only interested in selling,” says John, about his ‘“‘worst buy" Steiger ST 450 tractor, “In the 14% years that we had this tractor we never had everything working at one time. We did all the warranty work ourselves and had to wait up to 6 weeks for parts.”’ He nominates his John Deere 8850 tractor as “‘best buy”. “The tractor is easy to service, a pleasure to operate and fuel economy is good. We are a little disappointed in the ground speed selection between 5 and 6% mph, but this Deere is a definite step up from our Steiger. Dealer service has been good.” Alan F, Turner, Cupar, Sask.: ‘Our worst buy was a Massey Ferguson 751 pto combine bought new in 1980. “This combine had bearings all over it that were dry and hard to get at. The flanges are all on the inside of the machine, making them difficult to change. The transport on the hitch could have been designed better by a 2-year-old and some farmer could get injured or killed with it. The only good thing about the combine was dealer service.”
Danny L. Young, Wolcottville, Ind: He's happy with his Deere 8640 and 4640 tractors. ‘Both tractors have done everything I expected and more. I've had no problems with either. Deere has an excellent warranty program, especially to update their 4wheel drives. They have taken care of previous 4-wheel drives I've owned, too.”
Edmund F. Marek, Penelope, Tex.: “This is one of the best tractors have owned in my 33 years of farming,” says Edmund about his Deere 4640. “This is one of the best tractors I have owned in my 33 years of farming.” ‘Handles real good, does not use any oil, has more power than the factory says and starts perfect in real cold weather. Plenty of weight for the power, too. “Our worst buy was our 1076 Ben Pearson cotton stripper from the Ben Pearson Co., Pine Bluff, Ark. There are no dealers to get parts from, and no one knows how to fix the stripper. Ben Pearson did not stand behind the warranty. I called them over and over again but they never sent anyone who could fix the power steering.” Howard E, Stidam, Medora, Ind.: He had a bad experience with a new International 425 baler. ‘When my old baler wore out, no one seemed to have a good used one so our local IH dealer said he'd make me a deal couldn't refuse on a new one. He said there was a cash rebate on the model plus a special marked down price. never did get the cash rebate. When asked why, the dealer denied he had offered one saying it wasn't in writing. This wasn't the worst of it, however, as the baler wouldn't work. It kept shearing pins on the flywheel because the needles would drop before they were supposed: to. This happened so many times that the stop dogs finally wore through the ram and took the needles out. They keep' trying to fix it but can’t. I hired more hay baled last year than I baled myself and I still have a new baler that won't work. In addition, have to pay for it as though it were perfect.”
Scott Peacock, Alliance, Alb.: “Our Case 4-wheel drive tractor was a real headache. Most of the problems were related to steering yokes located at the end of each axle. Each wheel is able to turn, giving it a crab-like steering which may be good for pto implements but isn’t necessary for most types of field work. When a universal joint went out, the drive shaft cleaned house. Even the hitch busted off. Every time we had a problem, the dealer had an answer. But the only satisfaction we got was when we traded it off on a Versatile 895." Scott lists two “best buys”. “Our 8820 Deere combine and a 70-ft. by 10-in, Farm King auger are both good products. The 8820 gobbles up a 44-ft. double swath of chest-high wheat straw. A tremendous performer with capacity to match. Very few problems and the reversible feederhouse is a real back saver, not to mention safety. The Farm King auger has high capacity and couples directly behind a pto tractor so you don't have to unhook it. A hydraulic driven 10-ft. cross-auger feeds the main auger so even semi-trucks can be easily unloaded. A hydraulic scissor action undercarriage lifts the auger, empty or full, with ease.”
Kurt Ewald, Unionville, Mich.: “Our best buys have all been Deere tractors with power shift transmissions. We've logged close to 20,000 hours without one transmission or clutch failure, including a 1968 4020 with close to 7,000 hrs. Our latest best buy was Deere’s new 4850 with MFWD. The 15-speed power shift is smooth as silk. Efficiency with the front-wheel drive is excellent.” Donald M. Hoggarth, Sexsmith, Alb. “The worst new product I have bought is a new Gilmore Tatge 580 Tox-O-Wik grain dryer. have had trouble starting the burner and keeping it lit ever since it came on the farm. The serviceman has been out five or six times but it still has the same problems. There is an air switch which lights the burner and an air line that brings air from the fan to activate the switch. The least bit of dirt from the fan will plug this air line and the burner will go out. I have had to remove this line from the dryer and clean it three times with one batch of grain to keep the burner going, which is an awful nuisance. There is also quite a bit of vibration in the drive.”
Lon E. Moen, Ortonville, Minn.: “I'm well-pleased with my 8-row Max Emerge 7000 John Deere planter. It has good seed placement and causes no problems at all. My Feterl augers are also a big plus in my farming operation,”
Deane W. Meinhardt, Kahoka, Mo: ‘‘I learned about both of my best Deane. “In 1978 I adapted a John Deere 653 row head to my M Gleaner combine, using the Bish head changer. They both have worked satisfactory and beyond my expectations. In 1980, purchased a set of Clarence Trimpe’s reworked cylinder bars (Junction U.S. 31 and 50, Seymour, Ind. 47274) and they have done everything that he said they would do and more.” Another good buy is Deane'’s Dickey John spray monitor and radar gun. ‘Very little maintenance, accurate in speed range and the amount of spray applied.”
Samuel L. Keister, Bedford, Penn.: “Once they are half worn out the tread falls off, says Samuel, upset with BF Goodrich 7.50 x 16 10-ply tires. William O. Harris, Jr., Mineral, Va.: “Has a large capacity and han dles as easily as a toy. Requires little daily service, has convenient controls, good vision and a comfortable cab. Heads attach and detach very easily,"’ says William about his John Deere 6620 combine.
Ivan Gleeson, Lexington, Ill.: "I didn't think anything could be so badly manufactured as this,"’ says Ivan, disappointed with his “worst buy'’ New Idea corn picker, “I had two before and they were okay.” On his “best buy” list, he’s pleased with his International 830 chopper and forage harvester. “It outperforms the two we had before and does a super job. Our crops are heavy but the capacity of this machine is great. Also, we're happy with our International 3788 four wheel drive and Deere 4630.
James Ferguson, Canby, Minn.: On the “best buy" side, he lists two John Deere products. ‘My John Deere 2800, on-land 6-bottom variable width spring reset plow works great and has lots of clearance. My 20-ft. Deere 9300 press drill is also a good product but I had a minor problem with the inside scrapers. Deere has changed the design and is replacing all the scrapers free of charge. It has a large grain hopper and is a pleasure to use.”
Perry Black, Somers, lowa: ‘Our new International 5288 2-wheel drive tractor is so easy to operate that Itaught my new wife how to drive it. 1 wouldn't have even attempted to have her learn on our old 1466 as the clutch was impossible and the gears were extremely difficult to shift. A second best buy is our Deere 6000 Hi-Cycle sprayer. It's the most trouble-free machine I've ever owned for doing custom work and the Sound Gard cab makes it a joy to go to work in the morning.”
Frank Stake, Amberson, Penn: “It’s the worst buy I ever made,” says Frank, disappointed with his Simplex Multitherm HF-120 add-on wood furnace. “The boiler is nothing but trouble. If the electricity goes off or any part of the oil burner malfunctions, the wood boiler overheats and all the controls on the boiler are damaged and have to be replaced. This furnace doesn't do the job the salesman said it would. “I'm pleased, though, with my John Deere 567 wheel rake. It rakes linate ES: See clean, even in rough fields. The purchase price was reasonable and it has few parts to wear out. I have only replaced a few rake teeth.” Charles, Blankenship, London, Kent.: “This truck has run 223,234 miles on the original engine, rear end and transmission. All I've replaced are the clutch and waterpump,” says Charles about his ‘‘best buy” 1978 6500 series GMC truck, noting that, “The 366 cu. in. engine is number one in my book.” On the negative side, Charles had a bad experience with another truck, “The ‘worst buy’ in my life was a 1976 600 Ford truck. In 19,000 miles and 13 months, the Ford dealer in Knoxville, Tenn,, installed 6 complete 361 cu. in. engines, each one costing a tow bill of $150 to $460 and a dealer charge of $300 to $700 per engine. don’t want any more Fords, not even as a gift."’
Donald L. Miller, Bangor, Penn: “I've been no-tilling for 10 years and this was my most trouble-free year on our stoney ground,” says Donald, pleased with “best buy” Lippi coulters mounted on his John Deere 7000 Max-Emerge planter. He bought the coulters through his John Deere dealer, Chapman Equipment, in Allentown, Penn. ‘They take half the strain away from the planter unit and cut breakage of springs, while greatly reducing down time on my 700 acres of no-till corn. We had such a beautiful corn crop would recommend these units to anyone. I bought them for $325 apiece and they're worth every cent. understand Deere is coming out with a similar unit soon. “We are also very happy with our 1981 Sierra Grande 1500 GMC 4wheel drive pickup. We've had no problems at all after one year of use."
Stuart Beckman, Menlo, Kan: Stuart's pleased with his 8-row, 30-in. spaced International 800 Early Riser planter. ‘‘We bought this planter in the spring of 1982 and planted over 1,500 acres of corn, soybeans, grain sorghum, and sunflowers. Plants with better accuracy and is more stable than the TH 500 planter we traded in. especially like the large, centrally located seed hopper, ease of depth adjustment and consistent depth control. It provides good seed-to-soil contact. We had excellent stands in conditions from too wet to too dry, Possibly the best thing about this or any of International's air planters is the ease of changing the planter over for different crops. I went from planting soybeans to sunflowers in less than 10 min. Anyone buying a planter ought to look these new Internationals over twice.” Also on Stuart's “best buy” list is his International 2 plus 2 3588 tractor bought in 1981. "Good power and traction and [ like not having to fight duals all the time, A good row crop and dry land tractor. “Our John Deere 4440 is the nicest tractor on the farm but it's also the biggest fuel hog. Good comfort, visibility and power. “My most memorable ‘worst buys’ were two 1976 LM 630 Allis Chalmers cornheads. With about one hour of service each morning they worked fairly well the first year, After that, neither one would run for 12 hours at a time due to constant roller bearing and roller drive problems. I traded them for John Deere 830 cornheads, which work excellent on our 1980 Allis Chalmers L2's.”
Alex & David MacKellar, Alvinston, Ont: ‘This plow was very disappointing.’ savs the MackKellars, unhappy with their 5-bottom, 16-in. semi-mounted, John Deere 13501450 plow. “It was hard to pull and subject to continual breakage. It was bent, busted and broke with no warranty. We had a scrap pile of broken “We also bent and broke frogs and spent more time fixing it than plowing in the field.” and bent points with hardly any wear onthem. Wealso bent and broke frogs and spent more time fixing it than plowing in the field. We have since traded it in ona Kongskilde plow and plowed 3,000 acres before replacing the original points or any other part.”’ The Mackellars had good luck with their Wil Rich 28-ft. field cultivator. “It's been maintenance free. We covered approximately 6,000 acres in three years and have had absolutely no breakage or down time. It shows no wear in the springs or shanks.”
Leslie Johnson, Shell Rock, Iowa: “My John Deere 4640 tractor is comfortable to drive, quiet and has lots of power. Mechanically, it has been no problem whatsoever. Deere found out the water pump bearing wasn't heavy enough and fixed it at no charge to me.” On the “worst buy" side, Leslie had trouble with a “Stan Hoist 8-in. bottom drive grain auger. The sealed bearings have gone out at least once every year since I've had it. Shear pins break in the enclosed gear box instead of by the pto gear box where they're supposed to break.” John E. DeMoss, Jr., Moro, Or.: “The Positraction feature is great. My tractor should last twice as long as comparable competing models,” says John, happy with his 1981 Versatile 895 tractor. “I like to be able to lock up the front and rear differentials for hard pulls and hillside operation and then unlock them for road moving. I also like the quietness of it, the ability to vary rpm's for field speed, and to shift up and slow the rpm's for fuel economy."
Larry Allbeck, Millville, Penn: “We've had a John Deere 8200 grain ‘drill for two seasons and it’s been maintenance free. Very easy to set and weare especially pleased with its Tru-Vee openers for their accurate seed depth, particularly in soybeans."
Louie W. McCoy, Albia, Iowa: “They weren't a big purchase but I'm very pleased with my Visegrip needle nosed plier. It’s a very handy tool that should be in each of our tool14) FARM SHOW (oo boxes. Another ‘best buy’ is our John Deere lawnmower. It's very powerful and makes yard maintenance a real pleasure."
Woody Bryant, Austin, Ark: “I've used my John Deere 510 round hay baler to bale several hundred bales and have never had trouble getting them started. It rolls a tight and neat bale that stands the weather well,” reports Woody.
J. Russell Angell, Mocksville, N.C: He's disappointed with his International 830 forage chopper. “It pulls hard, much harder than a John Deere. The cornhead is a joke. You can't adjust the spout to direct silage from side to side, or to the rear of the wagon, from the tractor seat. Generally poor design and workmanship on the whole machine.”
Tommy Griggs, Kenton, Tenn: He's upset with his Tye grain drill. “The drill is poorly constructed and made of low quality materials. We have had to replace all springs and many other parts that have worn completely out, In less than two years of service it has worn 7 or 6 limes more than normal.” His “best buys” are his two John Deere tractors, a 4440 and a 4840. “We've had no major problems and only a few minor adjustments. They're very comfortable to operate and easily serviced. Dealer service is excellent.
Don Wogen, Marshalltown, Iowa: Don has a “best buy" John Deere 6620 sidehill combine. “I have had very little trouble with it and, on rolling ground, you can harvest faster with it than with the larger 7700 John Deere combine it replaced.”
Harold Landon, Greenwood, Neb: “This combine runs smoothly, does an excellent job separating the chaff from the grain with very little grain loss. We've used it in wheat, oats, milo and soybeans with good results all around. It’s a great improvement over the 915 we owned previously,” says Harold, happy with his International Axial Flow 1460 combine, Richard Schlipt, Gridley, UlL,; “We've had this dise for a few years and still can’t get it adjusted right,” says Richard about his ‘‘worst buy” Bush Hog disk. “We have problems with the wings plugging and the whole disk fish tails when disking cornstalks. We had a factory rep out to help, but he did very little good and gave us little encouragement. also had to rebuild the hydraulic cylinder bracket frame, which broke after very little use.” Richard likes his John Deere 4400 combine outfitted with a 213 soybean head. ‘‘We bought this combine used and, even though it is an early model, it runs very smooth and the bean platform works great. “Also, our new 111 John Deere lawn mower is a pleasure to drive with its hydrostatic drive and very short turning radius. It takes the chore out of mowing the lawn.”
Dean L. Clouse, Murdock, Kan: His 1981 Audi 5000 auto is his best buy. “The front-wheel drive handles real well in mud or on ice and for highway driving. The five cyl. engine is economical on gas, getting around 25 mpg. A real sturdy auto backed by a good dealer. “Another best buy is Deere’s 111 lawn mower. My wife does the lawn mowing and says it handles well, does nice work and is no trouble to start and operate. Another good buy is our 1380 John Deere hay conditioner. It does a real clean job cutting hay, laying it in a nice windrow for round baling. We had a small problem at first but the company took care of it.” ~
Richard E. Stewart, Canisteo, N.Y: He nominates his Century field crop skid-type pickup-mounted crop sprayer as ‘‘worst buy”. “The pressure gauge and electronic control panel was eaten up by corrosive liquid fertilizer. The toggle switches on the control panel break easily because they are made of thin plastic. The 8-wire plug broke apart inside after plugging and unplugging three times. On the sprayer itself, the hose clamps are nothing but junk. No stainless steel can be found anywhere on the machine. The gasoline engine is mounted so that the exhaust blows right onto the valve manifold and it has such a small fuel tank that you can't spray out one full spray tank without refueling. The nozzle mounting brackets are flimsy and bend easily if a boom end touches the ground. They are fastened with a cheap stamped metal wing nut, which is impossible to remove after the fertilizer rusts it fast. Overall, the product is a bad combination of cheap materials and shoddy workmanship." On the positive side, Richard is happy with his Deere 4440 tractor with Sound Gard cab. “The tractor is quiet and comfort of the cab is superb. One thing I like is that both the engine oil and hydraulic oil reservoir filler caps are set so you can pour directly from a 5 gal. pail without a funnel. Also, the engine uses as little oil as any large diesel engine I've ever seen. “I'd also like to commend Deere for its excellent service publications. They are well written and easily obtainable from the company directly without going through a dealer. That department of Deere in Moline does a good job of processing orders.”
Mitch Moser, Ligonier, Ind: ‘One of our ‘best buys’ is our Steiger PTA 325-automatic. It has plenty of power and is weighted right, Everything about it is heavy duty. The Allison automatic transmission is hard to beat. It downshifts so smoothly you can't even feel it shift. “We also like our Wil-Rich 12 18-in. 2900 plow. Maneuvers and backs well and all replaceable parts wear evenly. The plow is easy to set and plows level. The walking tandem in the center would be hard to do without. It lets the plow cross uneven terrain smoothly. It also easily folds for transport, On the minus side, the tires on the tandem are too small. replaced the 11,00 L-15 with 12.5 L-15 tires. However, the plow needs 16.5 L-16.1 tires. Unfortunately. there's not enough room for them. Also, the Star brand bottom replacement parts don't fit too well. understand now you can get a Wil-Rich plow with Deere, International or White bottoms. “Also on our minus side is our Pace FM 152 VHF radio. Its had more repairs in five years than it’s worth. We have neighbors who bought theirs at the same time and they've also had problems. “Another bad buy are our two 1350 - 1450 series John Deere plows. We can never get them to plow evenly. Our soil varies from one end of the field to the other. In high ground, these plows plow shallow and in the low ground they suck down some 12 inches. The dealer did all he could but the area man for Deere was unrealistic. He told us to try this and that and everything he suggested was going to cost us money out of our own pockets with no guaranteed results. Needless to say, the plows are gone.”
Lynn Leichtnam, Presho, S. Dak: “The 3-pt. hitch on this tractor hasn't worked since we've owned it,” says Lynn, disappointed with his Case 2390 tractor. “‘When in the down position it won't pick itself up, It's been back to the dealer three times but is still not fixed.” Heading his ‘tbest buy” list is his Deere 1610 27-ft. field cultivator “Our old field cultivator’s wings would float out of the ground on uneven ground, so we had wheels installed on the entire length of the cultivator and it cured the problem.” Clarence McDougall, Mitchell, Ont. “It's run over 50,000 miles with only regular service and few repairs Pulls 60 market hogs in a gooseneck trailer and does almost all our trucking. Has a 4-speed manual transmission and a 351 engine converted to propane. Runs every day using very little oil,” says Clarence, pleased with his “best buy” 1980 Ford F250 pickup. He's also happy with his Nuhn liquid manure spreader from Nuhn Industries, Ltd., Sebringville, Ont, “Because we're dealing directly with the manfuacturer, service is never a hassle. We have used several of their spreaders and all have been well engineered and strongly built.” Will Ed Powell, Springfield, Tenn,: Will likes his Sure-Flame 2000 wood stove. “The stove is outside so there's no mess in our house, We have been on budget billing with our electric company for the last three years and have always owed them money in April when we settle up. This vear. after buying, our Sure Flame wood stove. we had a credit of $974 on our April billing. We did have to cut the wood, but this turned out to be a warming experience.”
Donald H. Meierhoffer, Minonk, ILL: “It has the horsepower and handling for all my smaller jobs. There were a few oil leaks on pumps, but dealer service was good,'' says Donald about his “best buy” Deere 2940 tractor.
Orvel Hetletved, Tuttle, N. Dak: “No trouble whatsoever. Runs like a charm,” says Orvel, pleased with his 456 New Hollland 9-ft, mower. Gehring Farms, Inc., Hartford, Wis.: “The 4240 is a great piece of machinery both for power and traction, plus great operator comfort with the hydraulic seat,’’ says Gehring, pleased with his “best buy” Deere tractor. “The 3960 Deere forage harvestor is probably the greatest advance in forage harvesting machinery with its section-type knives for easy replacement and its low power requirements, think it is without a doubt the best forage harvestor on the market today. We have had it four years and have harvested more than 2,500 acres with it, ) “Also on the ‘best buy' side is our Deere 7000 corn planter, which has never missed a row or had an uneven stand, and our Deere 716 unloading wagons. There is no noise or jerking when these wagons are in use and they haven't broken down in the five vears we have owned them." On the minus side, “Our ‘worst buys’ are the BF Goodrich tires on the rear of our 4240 tractor. The sidewall on one blew right out with only 107 hours on the tractor. The blow-out was about 8-in. long. The amount of rubber and cord on the sidewall of these tires isn't enough to hold up on a garden tractor, much less a farm tractor.”
Gerald Hagensen, Mapleton, N. Dak: ‘It's the smoothest running lawn tractor I've ever owned, Beautiful handling and it does a beautiful job of cutting. It's sheer joy to cut the lawn with it,"’ says Gerald, about his Deere 317 lawn tractor.
Alan West, Darwin, Minn: ‘Alan's disappointed with his ‘D-Track, manufactured by Fabridyne, Litchfield, Minn. ‘“D-Track is supposed to attach to your grain drill to erase tractor tracks. First of all, it hardly makes a mark in the tractor tracks and, secondly, it doesn’t raise off the ground far enough on the end when you're turning. We contacted a company representative and he said he would help, That was a year ago and we haven't seen him yet!” On the “best buy” side, Alan likes his Case 2590 tractor. ‘The tractor is smooth running and very easy to drive. I've driven both International and Deere, and have found Case to be the easiest driving, best running tractor.”
Allan Thomas, Turon, Kan: ‘We have had a severe infestation of sparrows so, about a year ago, we bought two traps, both of which I nominate for ‘worgt buy’, says Allan. ‘‘Neither the Last Perch nor the Vail live sparrow traps have trapped a single sparrow." Marion C, Nicholls, Carlisle, lowa: “The planter has done everything for us that the dealer said it would. We have used it for two seasons now with no problems or breakage. The fluted no-till coulters work fine even in extremely hard ground," says Marion, pleased with his Deere 7000 planter, equipped with a no-till package.
Stuart Henzel, Holdenville, Okla: “My ‘worst buys’ are two Honda ATC 200’s and a Stihl chain saw. The ATC’s are hard to start and parts for them come at exorbitant prices. The Stihl saw was new last year but has been to the dealership several times and still won't run. Last week we traded it off.” Paul C, Graf, Arapahoe, Neb.: Paul nominates Deere's 4-row rotary lister as “worst buy”. “The lister was a joke from the word go. never got a stand. in part because the covering discs are so weak they bend if dropped, I believe that they had been in a fire and lost their temper.”
Richard L. Boeder, Buffalo Lake, Minn: He nominates his Menard farm building, purchased in 1974, as “worst buy". “It had the worst possible workmanship. There was no response after part of the roof blew off even though it was under warranty. Just a piece of junk, Money thrown away.” On the plus side, Richard's happy with his Deere 4640 tractor. '‘No problems with it. Lots of power and fairly reasonable on fuel. A dream to drive."
Daniel J. Denis, Domremy, Sask: “We've had to put three transmissions in it in 36,000 miles. The seals leaked at 25,000 miles and we had to put rings into the engine. It runs irregular and floods when starting,” he says about his 1974 International 1600 Loadstar. “On the ‘best buy’ side, we've had Deere tractors since 1949 and the last of the two-cylinder models was an ‘R', We've had five Generation I tractors and still have a 4020 and a 3010 on hand. We've also had eight Generation II tractors and still have five of them from a 4430 up to an 8640. All have given good service and performance. The only one we've had reservations about was a 1961 4010. It took a while to get the problems ironed out but, when we traded it, it was performing like a 4020, Our current ‘best buy’ is an 8430 John Deere. I bought it to get more traction and the tractor has plenty of that, plus more horsepower. Maneuverability is good and servicing simple.”
Don Ready, Kimberley, Ontario: Don's Belarus 500, 65 hp. tractor is both his ‘best’? and ‘worst buy”, “The price was ¥2 that of a Deere, like the simplicity of design, the tires are excellent and fuel consumption is very good. It uses about 1.5 gal. for disking and cultivating and just 1 gal. per hour for planting. Service is also good and, when we blew the engine, a new motor, starter, alternator, fuel injector and water pump were delivered to my door for $2,500. “On the negative side, the tractor has poor quality hydraulic lines and plastics, Excessive vibration broke an oil line which burned out an engine. The clutch and brakes are poor and the instruments have all broken."
John Knippen, Middle Point, Ohio: up to date. I enjoy it very much. In fact, it helped me make up my mind what planter to buy," says John, pleased with his ‘tbest buy” a John Deere 7000 planter with a Fieldtron monitor. We're very happy with the planter, It worked better than we expected. We planted some no-till corn and beans with very good stands. The Fieldtron Monitor is very accurate, causing no problems. Together with the planter, it makes putting in crops a pleasure.”
Phillip Wagler, Partridge, Kan: An American Breeders Service representative, Philip says his own product is his “best buy”. ‘I use it on all 35 of my dairy cows as well as on my beef cows. get the use of the best genetics in the country and it does settle my cows. There isn’t a bull on the place except for one small calf.” Nick Kercheval, Shenandoah Jct., absolutely one of my best purchases,” says Nick. “I've found quite a few new products that have interested me and ideas for farm-built projects that I will use in the future, “Other ‘best buys’ include my new John Deere 6620 turbo hydrostatic combine. It’s a pleasure to operate. Its capacity is far greater than my old 6600 and the new unloading auger makes loading trucks a breeze. On the negative side, the 404 cu. in. turbo engine uses 1.6 gal. per acre with a 6-row head while the old 329 used .8 gal. per acre with the same head. “Lalso like my Echo 452 VL chainsaw with a 16-in. bar. The handle is vibration free and it starts easily.” Nick adds that ‘‘my used 1976 970 Case tractor was not a bad buy but I have had a frustrating problem with it. bought it with a bad power shift transmission and had to have the transmission rebuilt. Before rebuilding the transmission, the hydraulic brakes would actuate themselves when the motor was revved. The brake control block was replaced for $800, which cured the problem temporarily but now it’s doing it again. No one seems to know the answer. Otherwise, it's a fine tractor.”
Paul Courey, Tilbury, Ontario: Paul’s had trouble with his Deere 71 Flexi planter. “This planter might perform reasonably well in a powder-fine seedbed at about 2 mph but under any other conditions, it is totally unsatisfactory. Seed Spacing is hit and miss, and depth control is nil. It scatters seed throughout the en- . tire depth range."’ On the positive side, Paul's happy with his Deere 7100 Soybean Special planter. “It gives very accurate seed placement and spacing, good penetration in heavy soils and is unaffected by surface trash. It is totally opposite to my “worst buy" Model 71 which it replaced.”
Greg Bensman, Sidney, Ohio: He names his Deere 4640 tractors as best buys, ‘‘They’re real dependable, quick starting and have lots of power. Our oldest one has 2,650 trouble-free hours, Really like the quad range transmissions because of the way it overlaps. You can always find a range with the right speeds. The hydraulic seat is very comfortable. Ll also like the tractor's fuel efficiency.” Greg's also pleased with his Deere 1981 front-fold 7000 planter. “We're real impressed with the way this planter front folds. It takes only 45 seconds to fold and move on to the next field. After 4,500 acres, all we've done is to have our local Deere dealer add individual lever marker controls so we can lift markers separately without stopping to lift the planter. This feature is nice for point rows and for avoiding electric poles.” Greg also names his Comtronix FM 2-way radios as “best buys”. ‘We bought six units in the spring of 1981 on the advice of a friend and we now Have 11 units. They save gas and help shorten downtime. It's nice hearing just your other radios and not a bunch of CB talkers. They have an excellent warranty policy, too.”
Jimmy Monin, Cox's Creek, Ky: “One of our ‘best buys’ ever was our 170 Allis-Chalmers tractor, bought brand new back in 1971. The tractor now has around 2,300 hours on it and, aside from oil filters and a battery, we have spent less than $75 on it. We also have a 2640 John Deere with about 200 hours on it and it's doing real well. Our ‘most dependable ever’ tractor is our old 1957 520 Deere which we use almost all year long for light work such as hauling hay to the cattle in winter. It is almost maintenance-free. We also have a 1954 Farmall Super-M which is alsoa good tractor but is hard on the gas. We don't use it much. “On the negative side, our ‘worst buy’ has to be an International 140 tractor that we bought new in 1975. Even when it was brand new, the head was leaking antifreeze, and the hydraulic system and rear end were “Even when it was brand new, the head was leaking antifreeze.” leaking. The governor wasn’t adjusted right and neither were the brakes."
Gary A. Jackson, Moweaqua, IIL: Heading his ‘“*best buy” list is his 500 gal. Century spray tank carrier mounted on his field cultivator. ‘We mounted the tank carrier on the front of a Deere field cultivator and used a Dickey-John sprayer contro! system. It all worked very well. The carrier is built heavy. I like the tank carrier because you can do away with saddle tanks on the tractor and it does not add any weight to the field cultivator.”’
John R. Farrell, Scottsville, N.Y: “This disk has %4 in. blades and a cushion gang attachment. We haven't bent a blade in over 1,000 acres of stoney ground, The disk does a great job and is easy to adjust,"’ says John about his Deere 235, 20-ft. wing-fold disk. “The only problems I've had are that the bolts for the cushion gang attachment kept breaking. A neighbor, while replacing a bolt, cut his arm on a very sharp piece of steel on the disk frame. After grinding away the sharp corners, and the dealer replacing the bolts with grade 8's, there have been no more problems,”
Russell Rose, Sleepy Eye, Minn: “We are very pleased with our 1979 Dodge W150 4-wheel drive pickup,” says Russell. “We get 15 mpg and use it on our hog trailer. The truck rides very smooth, “There seems to be no limit to what it can pull.” “Our 4640 Deere tractor has to be our ‘best buy’ ever. There seems to be no limit to what it can pull. It’s low on fuel consumption and we've never had anything go wrong with it in 1,500 hours.”
F.R. Kral, Biggar, Sask: His ‘‘best buys" include his John Deere 4440 Powershift tractor, his John Deere 7721 pto combine, and his Versatile 400 20-ft, self-propelled swather. “The tractor has the power I need. It's quiet and comfortable. The combine has the capacity I need, does an excellent job threshing and is extremely reliable. I like the ease of operation of the swather, and its capacity for work."
John A. Wurpts, Ogden, Iowa: “'It hasn't made it through one season yet,”” says John, disappointed with his Sukup 4-way automatic bin unloading system for corn bins,”’ The floor auger breaks, tearing up the gear box. The company doesn't seem to know what to do with it. We get charged for the repairs and improvements they experiment with. Totally disgusting and expensive.” John's Kinze 16-row folding toolbar planter with Kinze row units heads his list of “best buys". “It’s simple and less expensive. Accommodates extra units for 15 in. row beans. We like the machine but the dealer was inexperienced and did a poor set-up job. “Another ‘best buy’ is our Datsun diesel pickup. It gets great mileage at around 30 mpg for short runs. No trouble so far.” Francis L, Wessel, Goff, Kan.: “'l like my John Deere 2940 tractor with front-wheel drive for its maneuverability. It will go anywhere I drive it — through manure, mud, and it's almost unbelievable how it will go through snow. It also seems to be mechanically sound. “I'm also pleased with my DairyTronic automatic feeding system for my dairy cows. Does a good job.”
Jerald L. Smith, West Point, Miss: “Deere products are over-priced and over-rated on power. But they have an outstanding dealer service network in this area and, when my 1979 Deere 2840 developed faulty hydraulic couplings, they stood behind their warranty,” says Jerald, happy with his ‘‘best buy” tractor He says he doesn't have a “worst buy” because he hasn't bought any late model equipment recently. ‘We can't pay for machinery made by $12 to $20 per hour labor with 50 cent cattle and $2.48 corn," he notes.
Gerald R. Holtz, Rib Lake, Wis: “Our biomass furnace, built by Dunn Energy Systems, Inc., has to be our ‘worst buy’,”’ reports Gerald. ‘“‘We paid $5,000 for it and didn’t get one full heating season out of it. They were out once to repair welds which pulled apart. Shortly after, the firebox cracked, allowing smoke to fill the barns. When the blower came on it fanned the fire, compounding the problem, Dunn has promised since March of 1981 to fix it for us but no one has shown up yet, even after many phone calls. “Our ‘best buy’ has to be our JL 306 skidding winch by Farmi of Finland,” says Gerald. “It makes a good wood-handling machine out of our 520 John Deere.”
Arthur Gapp, Walhalla, N.D: He likes his John Deere 21-ft. pull-type 580 swather. “I like the way it cuts and lays down a nice even swath that's easy to pick up. The windrows also dry off quickly when rained on,"’
K. Joe Kinnie, Julesburg, Colo: ‘I have never used a product that cost me so much,” says Joe, upset with Dual herbicide by Ciba-Geigy. ‘‘We were having trouble with foxtail on a couple hundred acres of corn ground. After considering many herbicides, we chose Dual for several reasons. 1. Ciba-Geigy claimed Dual will work by itself without another mixed-in herbicide. 2. Dual was said to work exceptionally well on foxtail. 3. We were told Dual would stay in the soil longer than competitive herbicides and thus would be there to take care of weeds that came on later in the season. “Unfortunately, we had foxtail emerge six weeks after planting. Choosing Dual cost us approximately $40,000 or, on the average, 70 to 80 bushels per acre. A Ciba-Geigy representative came out but gave us no satisfaction whatsoever. The fact remains that Dual did not perform. We applied the maximum rate and used the same sprayer as with our other herbicides. Comparing the Dual acres with Lasso and Atrazine acres, it looked as though we hadn't used any herbicide at all.” Oliver Noel, St, Lina, Alberta: ‘No more dependable than a Christmas toy from Asia,” says Oliver, disappointed with his Rockwell 10-in, band saw. “In thicknesses over one inch, the blade cannot be controlled at all. The blades break frequently and alignment cannot be kept permanent. Compared to other saws, it’s junk.” He's pleased, though, with his Makita 2030 12-in. planer/jointer. “We've used it for the past year to finish and shape rough lumber for shop use. It keeps its thickness setting perfect and the motor has been 100% trouble-free.” Oliver runs a new and used tractor parts shop and says he can pick the most popular older tractors by monitoring calls for parts, ‘‘Parts calls indicate to what extent these tractors are still being used. The three most popular at this time are: 1. Case 930. 2. International Harvester 706 and 806. 3. John Deere 4020.”
Melvin Paul, Marissa, Ill: “Many pickups have had my name painted on the door but I’ve never been so pleased as am with my 1981 GMC High Sierra,” says Melvin. “It’s been my ‘truck of trucks’, always performing beautifully! “T also have two great tractors that have never had a service call — a Deere 4240 and a Deere 4640, both bought in 1978. For me, green is the machine when it comes to tractors." On the negative side, Melvin has had trouble with his New Holland 775 skid steer loader. "It's with mixed emotions that complain “It’s my ‘truck of trucks’. Always performs beautifully.” about this machine because it’s as handy as having an extra hired hand and the company has been good about repairing it. But it’s had broken brackets, hydraulic breakdowns, and injector trouble on its diesel engine.”
Wayne D. Frederick, West Branch, Iowa: ‘‘My 700 John Deere Max Emerge planter makes it a lot easier to be a good no-tiller,” states Wayne. “I'm dedicated to no-till farming and was having trouble with my old planter. In the last five years with the Max Emerge, I have never failed to get a stand and have even had to cut back my planting rate 2,000 seeds per acre because I was getting a higher rate of germination. I have frame-mounted rather than unit-mounted coulters which lets me transfer planter frame weight to the coulters. I've been able to plant in just about anything.” Another top purchase for Wayne are his B.F. Goodrich Power Saver rear tractor tire radials. ‘We do a lot of blacktop driving in our custom work so our tires wear fast. Radials give us a smoother ride as well as better traction and longer life. This is the second set of radials on this tractor and the second tractor I have had radials on. The old set of radials had about 13,000 miles and 2,100 hours. Excellent wear and performance.” Francis Effling, Artesian, S, Dak.: “T looked at other balers and I think John Deere has the least moving parts,” says Francis, pleased with his 510 round baler. ‘When the dealer delivered the baler, he helped me get started and rode with me while making several bales. think this is extremely important in getting started right. The baler works great with my 60 hp tractor,”
Ralph Manternach, Cascado, Iowa: Both his “best buys” are made by John Deere. “Our 3940 chopper with electric controls has good capacity without big power requirements,” he says. “Does an excellent job chopping haylage without the dust you get when using a screen, which we don't own for it. Daily sharpening and shear bar adjustment takes 10 to 15 minutes. The knives are designed to move back if a rock or metal object is picked up. We know this feature works because we picked up a rock and it only moved back eight of the 36 knives. We lost just 45 minutes and had no expense.” ‘We have used our Deere 4440 tractor for about a year now and have had no expense other than normal maintenance. Good power and comfort. Especially like the float ride seat,”
Mark Lusk, West Mansfield, Ohio: “One of our ‘worst buys’ is a 1979 Ford F-350 truck with 400 motor and 4-speed transmission,”’ says Mark, “From the first day we had it, the front end shook and we got poor gas (Continued on next page.) Best And Wi mileage. We've had the front end worked on three times. The cab is like an oven in summer and like a deep freeze in winter, It's work every time you drive it.” On the “best buy” side, Mark adds that, ‘We bought a 1977 John Deere 4430 from our Deere dealer with 1,000 hours on it. Now it has 1,600 hours and we haven't had one minute of trouble. It has more horsepower than it's rated at and really like the Sound-Gard cab.”
Charles Kunka, Hamilton, Ohio: “We've tried just about every make of disk on the market and have found that our International gives us the best overall performance. Its great flexibility and constant depth control really do the job in our different soil types. Another key feature is its narrow transport width," “Another ‘best buy’ is our John - Deere 2800 plow. The adjustable _ width and high clearance enable us to follow the combine in cornstalks without plugging. We're also pleased with John Deere’s 336 baler with launcher. One man can fill all the wagons by himself, saving on manpower. We've had very little maintenance on it.” On the minus side, Charles says his White 253 and 263 disc harrows caused problems. ‘We had the 253 for a couple weeks, but the dealer was unable to make it level the ground correctly. So, he brought us a 263 _ which worked in a level field with no rocks, But, since some ofour ground . is rougher, we were replacing bearings and blades practically every week.”
Loren Ring, Kingsville, Ohio: Loren says his “John Deere 3020 has been a continuous problem, The rockshaft seals last an average of just six months. The wiring harness burned twice, Lots of problems." Mrs
Paul Boedeker, Fredericksburg, Iowa: “I don’t understand how a big company could ruin a machine from one model to the next,”’ says Paul, disappointed with the John Deere 7720 combine he bought two years ago. ‘I wonder if they made changes and then didn’t follow through and thoroughly test it in the field. Terrible capacity and grain quality.” His “best buy” is his new International 1480 rotary combine. ‘Great capacity, good grain quality and fine dealer service. Should have bought it two years ago. In addition, it's outfitted with a grain loss monitor, manufactured by Dickey John, that’s a top flight investment.” W. B. Harney, Jr., Robstown, Tex.: He nominates his Krause folding disk as his ‘best buy". “The disk angle is non-adjustable so all you do is set the depth stops. It has an automatic leveling cylinder, as well as a manual adjustment. It’s well-made and does a good job of cutting out sorghum stubble. Leaves the ground level and folds up real easy to transport. Followup from Krause was good.” On the negative side, Harney’s had trouble with his Rhino offset disk. “The scraper mounting brackets were the wrong ones for the disk, When used in the field, the mounting bars would bend and lock-up the individual disks. The dealer said it was too wet but I had an International offset disk working the same field at the same time and had no problems. I built my own bar mountings out of heavy angle iron.’
Dave Tobiason, Scotch Grove, Iowa: ‘‘Not a typical John Deere product,” says Dave, disappointed with his “worst buy” John Deere 450 grain buggy. “The welds came loose and the chain broke along with the shafts. Very undependable."’ On the plus side, he’s happy with his Deere 4440 tractor. ‘Plenty of power and easy to work on. In fact, this is our second one and it works as well as the first, which is still in use on our farm.” Charllie Gerthofer, Jr., Ladysmith, Wis.: “it keeps the house cozy and warm with lower humidity than our fuel oil heater. Besides, who wants to support the Arabs with their outrageous prices when there’s lots of dying of elm trees around,” says Charlie, pleased with his Ashley 15-H wood heater. “We went through two rear ends, it has no traction, and it smokes all the time.”
Bill Duckworth, Epps, La: ‘This feeder and conveyor is a joke,” says Bill, disappointed with his ‘‘Harvestore ‘Super Shuttle’ feeder and 105 conveyor. They were built cheap and sorry. The feeder had a tendency to disintegrate from time to time, and the chains break constantly in the conveyor. When they break, it takes half a day to dig them out, straighten them and put it back together. Extremely bad buy.” Bill says another “worst buy" was a 360 cu. in. engine in his Ford truck. “The 360 engine was designed wrong and Ford knew it. They extended the warranty 30 months but waited until the 30. months were up before sending a letter to inform us. After buying eight trucks and cars and two tractors from them in the last 10 years, we felt this was a lousy way to treat us. After three years of blown head gaskets, extreme oil consumption, water in the oil, and very little power, we replaced the engines at our own expense. Very little we can do but tell other people,” On the positive side, Bill's pleased with his Farmhand grinder-blower. “This machine has to be the most rugged-built and simplest grinder ever. We have ground over 10,000 bushels of milo and 5,000 bushels of oats with no problems, It has never plugged up, which I couldn't say about the grinder it replaced. Truly a peasure to operate.” Another good buy was his John Deere Max-Emerge 7100 planter. influenced my decision to buy a Max-Emerge,” says Bill. “It has the best seed depth control on the market, is well-built and easy to service. We have planted 400 acres with only minor problems.” Andy Pomerleau, St. Paul, Al‘berta: “This swather is more than a match for any of the hydrostatic swathers on the market today," says Andy, happy with his 1967 New Holland 905 swather with conditioner. ‘‘The flotation draper header cleans obstructions very well and is built to withstand lots of wear and tear. A dream to handle. I look forward to using it each year."
Dennis R. Teubel, Alva, Okla: Dennis nominates his Echo chain saw as “best buy”. “Four years ago bought an Echo 452 VL and, except for a spark plug and chains, have put hardly any parts in it. Because I liked the vibrator-less handle and the allaround performance of the saw, bought a John Deere 28, which is made by Echo and it has also been a good saw. Now I've bought an Echo 280E for trimming brush and it’s a good saw, too.”
Dave Aikman, Spencer, Ohio: ‘The dealer misrepresented this plow. It has no trash clearance and continuously plugged in cornstalks, with coulters coming loose and breaking. Trash coverage was also very poor,” says Dave about his John Deere 3600 7-bottom plow. He likes his 52-ft. Hutchinson 8-in. grain auger. “It’s balanced perfectly and our dealer has all parts available when we need them.”
Dan Merkwan, Geddes, S. Dak: “My ‘best buy’ would have to be my WL42 Westendorf loader,” says Dan. “I've got it mounted on a 4030 John Deere tractor with approximately 90 hp and it performs beautifully. In the three years I've had the loader, we've never had to repair it. It loads feed for cattle, hauls manure, and even digs rocks. The thing that sold me on the loader was the quick-tach two minute on/off feature and the good luck my neighbors had with theirs." One the ‘tworst buy" side, Dan nominates his Massey Ferguson 1100 tractor. “The tractor was supposed to have 90 to 100 hp but it can't pull alongside a 75 hp tractor. In the last few years, we've put money in the rear-end, the hydraulic system, tires, the 3 pt. hitch, and the motor twice. The air conditioner never worked properly and it only has a little over 3,000 hours on it.”
Bill Wendlandt, Garden City, Minn: “My ‘best buy’ is the promotion and marketing I get with a one cent check-off per bushel of soybeans. The dollars sent to the Minnesota Soybean Research & Promotion Council have been a good investment. If we grow it, we should promote it,”’ says Bill. Dewaine, Rayston, Elbert, Colo.: He’s pleased with his 1981 4440 John Deere tractor. “Like the way it handles in the field and the good vision from inside the cab. The hydraulic seat is extremely comfortable.”
James Arndorfer, Humeston, Iowa: “It did a great job of getting under our hail damaged beans. The dividers worked so well that we never once had to unwrap the reel,” says James, pleased with his “best buy” John Deere 218 flex head,
Ronald Day, Hammond, Ill: Ronald had trouble with Lexone herbicide from Dupont. “It didn't control what it is supposed to. The company came out and looked at all the fields but we haven't heard anything yet from them. Our dealer is still trying to get answers for us and other farmers in this area.” Ronald rates his John Deere 4640 as a “best buy”. ‘The seat in the 4640 is the best I've ever ridden in. The tractor has plenty of power and the quad range transmission has just the right speed for our tillage equipment. After 550 hours, we haven't had a breakdown. “Another ‘best buy’ is a 13-ft. mulchtiller from John Deere. It does a wonderful job in cornstalks. Our John Deere dealer has been great on service.”
A.P. Vaught, Centertown, Ky: “Our ‘best buy’ has been our 7720 John Deere combine. After one season of 600 acres of soybeans and 400 acres of corn, we haven't broken down for even one minute. This combine seems to have plenty of power and capacity. Its cab is comfortable and quiet. Also, dealer service is excellent. “Our ‘worst buy’ was our 510 Massey Ferguson combine. It’s never cleaned grain to our satisfaction, The screening system is obsolete. We can't seem to produce enough air to “It’s never cleaned grain to our satisfaction.” blow the fines out of soybeans or the husks out of corn. It lacks power in mud. One year, because of muddy conditions, we had to have a neighbor harvest our corn crop."
Stan Hensley, Baldwin, Wis: He's happy with his reconditioned 6-ton fertilizer spreader from Simonsen Mfg., in Quimby, Iowa. “I was getting tired of waiting to use fertilizer’ spreaders in the spring rush. Half the time, when I finally got a loaner spreader to use, it did a poor job of spreading or was broken. I thought of buying my own spreader but the prices for new ones were high for my limited use, and all the used spreaders which companies wanted to get rid of looked terrible. Finally, an uncle of mine in the fertilizer business told me about Simonsen’s. They take used fertilizer spreaders in trade on new ones, and then completely recondition the used ones. They doa good job and the spreader has been trouble free. And yes, the price was right, too.” Stan says his ‘worst buy’’ is the Cozy Cab he bought for his Deere 4020. “Why don’t companies stand behind their product? When I bought factory representative about air conditioning. He assured me there would be no problem. My local Deere dealer put the cab on with air conditioning and did a fine job. I really like the cab, but when I went to use it, the air conditioner broke with just two days use. My local dealer did all he could to help fix it. Cozy Cab said they would send a representative to fix it but he never did show up.”
Gary Ashburn, Blue Mound, IIL: “Our John Deere 2440 tractor with a 146 scoop handles real well and uses very little fuel. Starts good in cold weather and has plenty of power fora tractor its size.”
Lawrence Burkholder, Markham, Ontario: ‘‘My ‘worst buy’ Interna tional 1440 Axial Flow combine was not disastrous. I liked it enough to trade for a 1460. However, the 1440 was underpowered for the 6-row header use. It lacked engineering ‘finish’ and durability in areas like jackshafts, the feeterhouse shaft and the cleaning fan. The International axial design needs a better stone trap design, too. They tell me one is coming for future models. On the positive side, the dealer always gave excellent service during our downtime.” “My ‘best buy’ is my John Deere Max-Emerge 6-row corn planter. “Along with liquid pop-up fertilizer, applied at low rates, this planter makes 70 acre days realistic, even in our small and awkward shaped fields next to suburbia. We routinely plant at 74% miles per hour.”
Norman Siems, Melvin, Ill: “My ‘best buy’ was to install a twin cylinder electric hoist from Stone Hydraulic Industries, of Rockford, Ill. on my pickup. It turns a ¥%4 ton pickup into a true small truck. I have used if to haul so many different things in so many ways it would be futile to try to list them all. Iteven works as a handy portable ladder in isolated spots. The only drawback is that the amount you pull is limited unless a rigid hitch is installed. Because of the location of the fuel tanks on new models, one may have to use the type of hoist that slips into the existing bed. 1 would be concerned about the added weight for year around driving. “The Schultz planter tiller from Waterloo, lowa, is also a ‘best buy’,” Norman continues. ‘‘They suggest that you work the ground once and then plant. It works beautifully. Fits on my Deere 7000 planter. Pulls easy. No problems after two years and is still ready to go. had anticipated there would be problems in muddy pot holes that you could not ride up high enough to get out of, but was wrong.” Norman has no ‘worst buys" to nominate but says he's reconsidering the benefits of drilled soybeans. “I have had three years experience with narrow beans and my yields have, in most cases, been greater than 38 in. rows. But weeds were a problem the first year and, although that problem seems to be resolved, I have been plagued by wet fields at harvest due to the heavy canopy that doesn't let the field dry as fast as rowed beans. The anxiety and problems make it a doubtful practice.”
Lester Wissmann, Lesburg, Mo: “My John Deere 36 square baler is my ‘best buy’. I've never had a serious breakdown, and it continues to operate without any tying problems. use regular or plastic twine, both of which work fine. Good dealer service. “My ‘worst buy’ was an Allis Chalmers 942 square baler. It wouldn't take the hay. I had to bale with a single windrow so the feeder wouldn't shear pins. Field representatives checked it but didn’t think there was too much wrong. After baling 4,500 bales, I took a loss and traded it off.”
Raymond Gibbs, Dodge Center, Minn: He says his “worst buy" is “my Dry Mor Bluebird corn dryer. We used it for two years and are replacing it this year. I've never owned any machine with as many problems as it had. It would overdry and under-dry batches, and shut down many times a day. It was supposed to save 30% on fuel and increase capacity over our old AB-12 Farm Fan dryer but it didn't do either.” Raymond adds that his John Deere 4440 tractors are “best buys”. “We have two of them and they seem to be the right size for many jobs. They are very trouble free. Everybody likes to drive them.”
Bill McClurdy, Truro, Nova Scotia: ‘This mower will cut at speeds up to 12 mph and is exceptionally good in dense crops,” says Bill, pleased with his John Deere 1320 rotary mower conditioner. “The machine is also excellent for close cutting of fine crops. It has a trouble-free conditioning system that doesn’t vibrate the whole machine as do some other models. Maintenance time is almost nil since the knives are self-sharpening. A real plus machine for John Deere.”
Gene Schmidt, Smith Center, Kan: “My bad experience was with a 1980 Volkswagen Rabbit diesel. The guarantee is one year or 20,000 miles. This Rabbit was 15 months old and had just turned over 20,344 miles when a valve broke, breaking the piston head, and bending the rod. The mechanic said a flaw in the valve caused it and that the company would probably stand for the parts. That was a big joke! It cost $1,013 to get the car back and the company said it might have been a problem in service. In reality the car had actually been serviced more than required because I have always thought oil and filters were cheaper than repair work. - ['m getting rid of this car and will never own another Volkswagen.” On the plus side, Gene says his “best buy” is his new John Deere 8440. “The best John Deere have owned yet. So far no trouble and it handles great."
Gene Hofbauer, Rankin, Ill: ‘Positively the best piece of engineering I've seen,” says Gene, pleased with his John Deere 12-row front folding 7000 planter. “It places the seed where it is supposed to be, even over sandhills, and has no down time. “Also on the plus side is my International 490 28-ft. disk. Performed beautifully, even in muddy conditions,” Gene's disappointed, though, with his International 500 12-row planter with end transport. “Seed placement was poor and it had no depth control, even after purchasing gauge wheels. The person who designed the transport wheel must have been 7 feet tall with 300 lbs. of muscle.”
Burt Loitz, Colona, Ill: ‘1 have never had a major breakdown with my four John Deere tractors,” says Burt about his “best buy” Deere 4020, 2940 and two 4640's. “They handle easily, ride well and have ample power. The two 4640's are hard on fuel but make up for it with comfort, handling and a ‘Cadillac’ ride.” On the other hand, Burt lists his Ford F-250 4-wheel drive pickup as “worst buy”. ‘Although it drives and rides well, the 302 V-8 engine performs terribly. It has no power and is always at the gas barrel. I’ve had the carburetor worked on three times, but to no avail. It still gets only 6 to 8 mpg. Would appreciate any advice on how to get better gas mileage.”
Marvin Parmer, Wyoming, Iowa: “The paint was so thick on this tool that it wouldn't work. It seemed like the whole unit must have been painted by dipping rather than spraying. Now that got the excess paint off, the unit works satisfactorily,” says Marvin about his Golden Rod fence stretcher.” He's also pleased with his Chevrolet LUV diesel 2-wheel drive pickup. ‘It has exceeded my expectations in every way. In over 9,000 miles of driving, it’s averaged more “It has exceeded my expectations in every way.” than 35 mpg. Fun to drive and starts without being plugged in when temperatures are below zero.” Also on the ‘best buy” side is his Montgomery Ward 3-pt. hitch adapter kit for a John Deere 60 tractor made by Worksaver, Inc. “The kit is well-built and has given me 3-pt, hitch convenience on my Deere 60 at a cost of $75 less than I could find anywhere else." Robert Strnad, Jr., Moosomin, Sask.: ‘I'm on my second 350 diesel motor for my 1979 GMC pickup. The first went out at 36,300 miles, or 300 miles over the extended warranty. After two weeks of fighting, GM paid for the parts but I was still out $700 for labor, $200 for the tow, $100 airfare to get home, plus the cost of another vehicle to get to my appointment. should mention that the number one main bearing was laying in the oil pan along with the part of the block it bolts to. The crankshaft also broke. “My Dad has a 1981 GMC diesel and three weeks ago the number three main bearing was laying in the pan of his pickup. How many motors like this are out there? I'd like to hear from others with similar problems.”
Melvin Aderman, Malinta, Ohio: Melvin’s “best buys” are his International 1086 tractor and his “used” John Deere 6600 combine. “The 1086 has been very dependable, with good lugging ability, and is economical and comfortable to drive. The 6600 is also very dependable and give us little downtime."
Daniel Schroeder, Leipsic, Ohio: “One of our “best buys” ever has to be We have discovered several products in it that make money for us on every acre we farm. One is reworked cylinder bars from Clarence Trimpe, (Junction U.S. 31 and 50, Seymour, Ind. 47274). They help our two combines perform at least 20% better. Better in terms of quality, whether in wheat, soybeans, corn or sunflowers. On the minus side, Daniel is dissatisfied with his Demco spray marker. ‘‘We put it on our John Deere 335 sprayer. The marker has plastic nozzles that fit on the end of the booms and are supposed to spray a silver solution every so often. You can dial the length of mark and time between each mark, but when you are spraying at 10 mph, the mark isn't dark enough or spaced close enough for the driver to see,
Bonnie Denlinger, Mount Joy, Penn: We've had a 2010 John Deere and a Deere 70 tractor for many years and they're worth their weight in gold. They both work like old troupers with almost no problems. On the other hand, our John Deere 2030 is the pits and has been repaired more than the other two tractors together.’
Leland Flory, Catlett, Virginia: “I'm doing it the old way,” says Leland, pleased with the used equipment he’s bought for use on his small farm. ‘My John Deere model ‘A tractor, purchased for $100 and rebuilt for $475, has been my ‘best buy’ It works well with my 810 John Deere 3-pt. plow with two 14-in. trip bottoms. The tractor and plow fit together as a well-matched combination. The tractor also has ample power and traction to pull my disk with cultipacker and spring-tooth harrow trailing behind.”
Donald Weekes, Glencoe, Ontario: “Does an excellent job of planting solid seeded soybeans on 9-in. centers. Depth of planting, going from sand to clay in the same field, doesn't vary an inch. Press wheels do such a good job of firming ground that we save one trip over our soybean ground,” says Donald, pleased with his 8300 John Deere grain drill with Tru Vee openers and gang press with 4-in. wheels and slow drive kit. ‘Another good buy, is the International 2 plus 2 3588 tractor, which we bought two years ago. They knew what they were doing when they designed this tractor. It’s a four-wheel drive that handles like a two-wheel drive. Very pleased.”
Robert Butt, Flaxcombe, Sask: Robert nominates two “worst buys"’. “Our N-5 Allis Chalmers combine never should have left the factory. It was very poorly assembled. The concave has never shimmed properly and the unloading auger universal was not put together right. Very poor feeding in wheat because of the concave. An electric over hydraulic failure caused excessive plugging. There were other problems but your paper doesn't have enough room to Robert is also disappointed with his 1974 850 Versatile tractor. “It had “All the problems took place when we needed the tractor.” engine problems in the first 200 hours of service. Three sleeves and pistons had to be replaced as wellasa jammed injector. It had a universal that wouldn't take grease and was very difficult to work on. All the problems took place when we needed the tractor. “By far my ‘best buy’ was my 1979 4440 John Deere tractor which we have put roughly 1,600 hours on without an hour of down time. It’s easy on fuel, has the best of rides and has excellent power for its size. My dad thinks there's only one color of tractor — green and yellow. “Our second ‘best buy’ is an 8440 Deere that has all the features of the 4440, Easy to work on and a great ride.”
Robin Robinson, Lovelady, Tex: Robin likes his 605 F Vermeer round baler. “This baler has been very dependable and easy to operate. I've had one bearing go out in more than 2,000 rolls of hay. It puts up a consistently tight bale.” Robin's disappointed, however, with his Caraway V-type front end rake. “We purchased the rake from a local dealer and were told it would work well on any tractor in any type of hay. We found thé rake caused all of our tractors to overheat, including a 100 hp John Deere. Secondly, it would not rake our thick hay because the hay built up in front of the tractor and made a great mounded windrow that our trailing baler could not begin to handle. ‘When we went to the rake dealer for some solutions to our problems, there were none. He told us that we were the only ones having the overheating problem, which was the problem we were most upset by. We tried to trade the rake in to the dealer where we purchased it. He wanted to charge us $700 for raking about 100 rolls of hay. None of the other dealers in town even wanted to consider a trade with us, including the Vicon dealer who supplies the basic rake to Caraway. They wanted $3,000 difference between our two-month-old rake and their $5,600 rake.”
Terry Frommelt, Guttenberg, Iowa: ‘This is a super baler,” reports Terry about his Vermeer 605F round baler. ‘Most new equipment requires a percentage of warranty work but the only repair work I've done after custom-baling 1,500 bales is on one sealed bearing, a couple bolts in the pickup bar and I replaced three belts. In the first 1,000 bales, I didn't have a single problem.” He's not satisfied, however, with his Duracraft 6-in. bench vise." When you putan item in one side of the vise it does not tighten evenly in the jaws. When the jaws are tightened by hand only, using no extra leverage on the handle, the screw in the vise will jump a thread when it is almost tight.” Gilles Dehoog, Jr., Lynden, Wash.: “My ‘best buy’ is a model 698 Weed Eater,” says Gilles. “The gas motor has lots of power for its size. With the nylon line you can trim around buildings, fence lines or just anywhere. With the brush blade I've cut trees two inches in diameter. “Il also like my John Deere 2640 tractor. It’s small enough to scrape around the barn lot and, putting out 80 horsepower, it’s just right for field work. “My brother and I work together and another good buy is the John Deere 4440 he bought this spring. It's twice as much tractor as the 3020 (1968) he traded in but cost five times the $8,000 price our dad paid for the 3020. Dad, at 73 years of age, grew up with horses and it usually takes hima year before he tries out a new piece of equipment, but not this one. We had the 4440 only one week when he had to try it out.”
Bob Dueck, Dunrea, Man: ‘‘My John Deere 580 25ft. pull-type swather sure has proved itself,’ says Bob. “I have replaced nothing after three crop years. It cuts hay and even goes through green, tough flax like a charm. Excellent performance with no noise or clatter.”
Ted A. Pekar, Granger, Tex: Ted likes his John Deere cotton stripper. “We had our 30-in, row header and stripper delivered to us just before last year’s harvest. Now, after two seasons, only one bearing has needed replacing. Hardly any adjusting is ever necessary.” As ‘worst buy”, Ted nominates his ‘‘Wood's Brothers 320 Bat Wing shredder. After a lot of trouble, the company service people haven't shown up for 18 months, First the gear teeth and gear box fell apart for a cost of $1,200. After only one year, all the drive lines had to be replaced for another cost of several hundred. Truly a pile of junk.”
Joyce W. Miller, Independence, Kan: “In 1979 I bought a Ford 2600 3-cylinder diesel tractor. in two ‘*A mechanic told me to turn the steering wheel when turning the key. It worked.” years, it has been beyond my expectations in dependability, amount of warranty work needed, fuel economy and its snappy engine. “In 1979 Lalso bought a 2640 John Deere tractor. It starts good when cold, has plenty of power but is the most frustrating tractor in my 42 years of owning tractors. First, the quick couplers on the cylinder hose popped out several times, shooting about one gallon of oil on the ground. [had to wire it together for 11 months before John Deere replaced the unit. “Then, the hose on the oil surge tank above the radiator split and, when oil hit the fan, it gave me an oil bath, Deere made a heavier hose but it took 15 months to get it. Another problem is that for the last year, after using the tractor fora few minutes, if] shut it off the starter would not turn the engine over. A mechanic told me to turn the steering wheel when turning the key. It works. “The final problem is that the hydraulic cylinder drops its load when cold but raises when warmed up, requiring constant adjustment on the lever,” explains Joyce.
Dale Berden, Snover, Mich: Dale's unhappy with his Glencoe W34DD field cultivator. “When we first got it, it wouldn't raise level. We had to put in new axles but it still is not perfect. Also, the frame has broken several times. The dealer and the company have been good in getting new parts but it should have been built better in the first place.” Dale's had good luck with his John Deere 4640 powershift tractor. ‘It has about 700 hours on it and the only time it's been in the shop was for a 100 hour check-up. I like the power shift very much for the sugarbeet harvester and our 16-row planter.”
Burl Eastman, Scio, Ore: ‘We had trouble from the beginning with the scrapers,”’ says Burl, unhappy with his 315 International Culti-Mulcher. “They wouldn't stay adjusted and we had to completely redesign the scraper set-up, The smal] pins on the hydraulics which set the depth on the spring teeth are constantly breaking. The arbor bolt broke in two and we had a terrible time finding a replacement. It took three weeks and we probably still wouldn't have it if it wasn't for the diligence of one employee at our dealership.” On the plus side, Burl's happy with his International 1486 tractor and John Deere 3600 land plow. “The plow pulls easily, is easy to adjust, built sturdy and has good clearance. It is definitely one of my better buys. Once we rectified minor irritations on the tractor, we are well-satisfied. Has good fuel economy and the brake system is excellent.”
Robert Born, Hazel, S.D: He's unhappy with his Case 2390 tractor. “The fuel tank leaked, hydraulic and power steerifig hose ends popped off, the manifold gasket blew out, an injector line broke, the cab was dusty and the wheels would lock up and slide if you stepped on the clutch without first moving the power shift to the number one position. Did have good power, however.” Robert also reports some problems with his TR 70 New Holland combine. “The shafts and gear boxes were too light. Brackets fell off due to poor welds.” : . Robert adds that his 9350 John Deere drills and 7000 Max-Emerge planter have proved to be good purchases. ‘‘After using the drills last season, I’ve had no problems. The three 10-ft. drills have a hydraulic transport that goes from field to road position, or vice versa, without unhitching the ‘tractor. I've used the corn planter three seasons with only one breakdown,” J.W. and
J.W. and Ricky Winburn, Water Valley, Miss.: They like their John Deere 4440, 4640 and 4840 tractors, all purchased within the last year. “Prior to our purchase of these tractors we owned Massey Ferguson and International. True to their slogan ‘Nothing Runs Like A Deere’, minor problems have been taken care of promptly and thoroughly by our dealer,”
Damon Lacey, Middletown, Ohio: He's happy with White's 5100 folding 8-row Seed Boss planter, We bought this planter for its mobility as we have scattered fields. The Deere planter we traded for it didn’t fold, The new planter’s durability has been way beyond our expectations, Depth control and seed spacing is better than any planter we've seen. It's incredible! Even with the bad spring this year, our stands are almost perfect.” On the negative side, Damon's upset with his John Deere 220 folding disk. '‘This machine constantly breaks, It has about as much downtime as it has working time. The breakage includes axles, blades, standards and entire gangs that fall off. Small rocks are murder on this disk. It’s pure junk!"
Ron Mccoy, Crookston, Neb: ‘‘l would like to nominate my 1981 Ford F-350 pickup as my ‘worst buy’,” says Ron. “When I first bought it, got 7.75 miles to the gallon with the 400 cu. in. engine. The dealer worked hard for me but couldn't get Ford to give me a new carburetor so finally bought a new 1979 model carb and my mileage jumped to 13.5. But I had other problems. The gearshift lever fell off in my hand. called Ford Motor Co. and all they did was refer me to the dealer, who, in turn, can't get anything out of Ford.” Ron adds that he’s happy with his two John Deere 4840's. ‘‘They're trouble free and have a world of power and comfort. I also have high praise for Deere's 12-row MaxEmerge planters. I've owned three of them and they're the Cadillac of planters.”
Tim Shaver, College Corner, Ohio: “best buy”. "I really enjoy reading (Continued on next page.) Best And Worst what other farmers are coming up with. I especially like your report on best and worst products because they're often products I'm thinking of buying and like to read how others evaluate them.” Tim's other ‘best buy’? nominations include the following: Snapper rototiller: ‘It has the motor in front of the tines which puts added weight on the tines, letting the rototiller dig in deep with little effort from the operator. Another feature I like is that the rear wheels can be adjusted rearward to put more weight on the tines.” Super EZ Homelite chain saw: “This saw works great. It has a compression release for easy starting and an automatic and manual chain oiler. had trouble at first with a loose flywheel that tore up the crankshaft but the dealer sent it back to the factory and they fixed it at no cost to me.” Warm Morning stove: "It really kept us warm during the coldest weather in an uninsulated large farm house. The kitchen and dining room stayed about 80° while the front rooms stayed about 70°. At first we had trouble keeping the fire going when we put another load of wood in but I found that, if we let the ashes build up on the grates, it keeps hot coals from dropping into the ash pan, When we moved we sold it because we had a fireplace. We bought an insert for the fireplace but it doesn’t have the heat capacity of the Warm Morning stove. I’m sorry now that I sold the stove.” K & W Copper Coat gasket compound; “After overhauling my John Deere tractor blew a head and couldn’t get the gasket to seal. My local Deere dealer suggested K & W Copper Coat, which he uses for high compression diesel engines. The head gasket hasn't leaked for six years." Alumnaseal radiator sealer: “While combining one afternoon, the radiator developed a leak. I thought I would have to take it off and have it repaired because I hadn't had any luck with other radiator sealers holding. I happened to have purchased a container of Alumnaseal at a local Deere dealer who said it was a great product for sealing radiators. The Alumnaseal has held for two years without leaking.”
Donald Hopf, Herman, Wis: His three “best buys” are all red: An IH Cyclo 400 corn planter, IH 510 grain page) drill and an IH 5000 self-propelled windrower. ‘The Cyclo air planter has proved to be a better corn planter than our 1240 John Deere planter for speed and accuracy. There's less down time for repairing fingers, excellent depth control and perfect hydraulic markers. The 510 grain drill has done an excellent job seeding grain and alfalfa. The 5000 windrower is a great machine for cutting alfalfa. There's no plugging of any kind. I've cut 450 acres a year with no down time. We have three good IH dealerships to depend on."
Max McMichael, Spencerville, Ohio: He says his “worst buy” was “Jamesway tie-stall barn equipment package. The gutter cleaner parts were missing and it took six months to get them. Only half of the box stall sections were delivered and we didn’t get the right clamps to assem“The dealer was paid on delivery. This was a mistake on our part.” ble the stalls. After two years we still don’t have outside fan covers. Several telephone calls were made but the company won't respond to the problem. The dealer was paid for the equipment on delivery. This was a mistake on our part because he was paid and didn't care." On the plus side, Max has a couple good buys. “Our Knight 350 Soup 'N Solid manure spreader is great for sloppy material. The front end raises with hydraulics to let the web carry manure out on a slant. Also, our John Deere 2640 tractor is a good small tractor for a livestock farm. We are putting over 100 hours on it a month."
Jerry Wiford, Bellefontaine, Ohio: He’s pleased with a fold-up hydraulic kit he bought from Kelderman Man“Works perfect and makes transporting easy.” ufacturing in Oskaloosa, lowa, after installed it on a 12-row John Deere 30-in, row model cultivator. Instructions included were self-explanatory, making it easy to install. Works perfect and makes transporting easy. I've also recently purchased 2290 and 2590 Case tractors. Excellent hydraulics, cabs, fuel economy and power.”
Larry Jordan, Ridgeway, Ohio: Larry's pleased with his John Deere 7720 combine. “Il bought it in 1980 and it has performed great.”
Fred Hildenbrand, Ruffs Dale, Penn: Heading his ‘best buy” list is his Deere 7000 conservation 4-row corn planter. “It does a wonderful job covering seed planted in sod. The stand and seed drop is very good, even planting at 6 mph. I’m very pleased.” Fred has mixed feelings about his Deere 2940 tractor. "It has lots of power and good gear selection. But the hydraulic levers are inconvenient below the seat, it has a small starter and it takes a lot of room to turn in the field. Also, this tractor is not as easy to handle as my 1968 3020 John Deere. “My poorest purchase is a 1-ton GMC pickup truck. The paint started falling off the day after got it and I can't keep up with the rust on the body. There are also problems with the timing chain, transmission and clutch. It has the poorest body I've ever seen.”
Hershel Fisher, Bourbon, Ind: Hershel likes his Deere 2940 tractor. “T bought this tractor in Oct, 1980 and used it for all fall plowing and spring work. I'm amazed at the horsepower this tractor turns out for being rated 80 hp., yet it’s economical to operate. No complaints so far."
Larry Ruffner, Vermontville, Mich: Larry's had trouble with his Deere A-18 high pressure washer. “The initial price was $347 back in “We found an ultimate cure. We scrapped it!”’ 1974 and I've put a new complete pump on it at an average of $120 every year except last year, At that time, we decided to fix the hairline crack ourselves. It still leaked bad. This year we found an ultimate cure, We scrapped it! I would think that, as conscientious as Deere is with quality, they would examine the outside manufacturer which supplies this _poor product.” On the plus side, Larry says he’s pleased with the improved capacity on his new 1981 4-wheel drive Deere 6620 combine. “It's a better-built machine than the first 6620. Deere has perfected and eliminated many of the small problems that plagued us. It has plenty of reserve power and operator comfort, which is tops on our list. To top it all, it's amazing whata little push from the power rear wheel drive can do to get you through a soft spot.”
Rudy Raths, Norcross, Minn: ‘My ‘best buy’ is a Neuero 675 pneumatic grain conveyor,” says Rudy, “In three years, we've moved thousands of bushels of corn, beans, wheat, oats, barley and sunflowers with no trouble at all. There's much less cracked grain than with an auger, and no dust. Makes grain moving simple and easy, “The Neuero company is one of the best companies that I've done business with. Manufactured in Germany, their machine is superior to anything that I've ever seen or worked with. I'd recommend it to anyone.” Rudy adds that ‘my ‘worst buy’ isa Steiger II 4-wheel drive tractor. We had trouble right from the start. On the first day in the field we broke down for three hours. In fact, there was not a day that we didn't have trouble. It didn't have any power, although we were told by our dealer that it would have more power than our 7520 John Deere. Nothing was ever done to solve the problem. “After the first 300 hrs., the Steiger Il started to use from two to three gallons of oil a day. We gave it a complete overhaul at 700 hrs., then decided to sell it.”
William J. Lauckner, Nashua, Mont: ‘We harvest 2,000 acres of wheat each year and our down time is nil,” reports William, pleased with his Deere 6620 combine with 22-ft, header. “It handles like a dream and is quiet and comfortable in the cab. Good service from our John Deere dealer.”
Earl McDonald, Ogden, III: ‘I'm disappointed with M & W Gear's spacers for dual tractor wheels that let you plant and cultivate with duals on. They were loose fitting and let the dual come loose. So, I traded them off for DMI spacer rings, which fit tight and work excellent.” On the positive side, Earl nominates his 12-row John Deere 7000 Max-Emerge planter as a “best buy”. “ had an 8-row and liked the way it sowed seed with no maintenance or down time. That prompted me to go toa 12-row when I rented more land.” ].
Junior Mathias, Birmingham, Iowa: Junior's pleased with his new “Their metal detector is unbelievably effective.” Longwood Dualfuel furnace installed last December. ‘‘With the old furnace, we used 200 gal. of oil in November, 1980. From December to February, using the new furnace, we used just 50 gal. of oil. It doesn't use large amounts of wood and does maintain even room temperatures. No problems so far. “Another good buy was our Allis Chalmers 1300 series 23-ft., 6-in, wing fold cultivator. We have had no problems at all with it.” On the “worst buy" side, Junior says he’s had trouble with the input shaft and bearings on his F Gleaner combine. “The original lasted five years and the replacement lasted five hours. After three shafts and bearing sets, we finally harvested with $1,500 spent and no answer for our problems. Last fall, after a year, the company did admit the shafts they were selling were supposed to have been recalled, Our dealer finally obtained all new parts plus a new housing at company expense.” Junior's also pleased with his Deere 7100 folding 8-row planter, but has a suggestion for the manufacturer: “The adjusting gate settings for insecticide and herbicide boxes are different. We failed to catch the differences until we started planting. Then, we discovered one setting is for insecticide and the other for herbicides. Deere should put out more information to their dealers specifying which is which."
Larry Manternach, Cascade, Iowa: “My two John Deere 716A chopper boxes, mounted on Deere tandem axle wagons, are best buys,” says Larry. “They're very stable on rolling ground, have large capacity, and are easy to service, Belt drive delivers forage to the blower evenly from start to finish.”
Ellsworth Olson, Madison, Minn: “IT like my new 8640 Deere 4-wheel drive tractor. Haven't had any major mechanical problems, and enjoy operating it as it has a good seat and convenient controls. Seems to have good power and fuel efficiency.”
Robert Kennell, Roanoke, IIL: ‘I'd rather operate this combine than sit in my big easy chair at home,” states Robert, pleased with his Deere 7720 combine with 830 cornhead., “It re“I'd rather operate this combine than sit in my~ easy chair at home.” places a 7700 for us. It has more capacity and a much quieter cab. The improvements I-like are the unloading auger and control arrangement in the back. In 1,600 acres so far, we have had one minor breakdown but our local Deere dealer had us going in two hours. His service and the Deere warranty are the best." Robert's disappointed, though, in Basagran herbicide for soybeans. ‘Basagran just did not do the job on one of my fields last year. We put on one quart per acre and it did not get button weeds. A lot of these weeds were only 2-in, high and it still didn’t get them.”
Charles Flaming, Paxton, Neb: “I'm a firm believer in having the best corn planter for the best yields and the Deere 7100 folding Max-Emerge planter does the job!" Charles told planter four years ago. What a difference in stand over our old no-till planter. There's no end to bragging about the uniform depth and even distribution of seed planted. We had the old Max-Emerge four years and just traded for a new model. You couldn't give me any other planter. One attachment that we added are the Acra Plant trash whippers. They allow us to plant in heavy trash conditions. We believe this planter has increased our yields by 20 to 30 bu. per acre.” On the negative side, Charles says, “My advice to farmers with late 70's model pickups is to keep them, Don't buy the 81's. They aren't worth it. Our new Ford 250 has a smooth ride for a 4-wheel drive but that's all, After 1500 miles, it started to use a lot of oil. The body is terribly tinny, it has a thin, poor paint job and we are experiencing small motor problems.”
George Steele, Lawrence, Kan: “My ‘best buy’ and my ‘worst buy’ happen to be the same item. An electronic bug killer from Sears Roebuck,” says George. “It worked wonderful but, when it played out, it took them two months to replace the transformer at a cost of $60. When plugged it in after the repair, it mace a loud humming noise which wasn't normal, took it back to their service station. Another two months went by before they called to say it was ready. When we picked it up, they said nothing was wrong with it. ‘ wrote Sears in Kansas City about it. have their card dated Nov. 20, 1980 saying I would get additional word shortly, but haven't heard from them, Am tempted to sue them to take ‘satisfaction or your money back’ off their catalogs. No more Sears for me. “One of my ‘best buys’ was a little 3-pt. backhoe made in Claremore, Okla.,"’ adds George. ‘‘I believe Hesston owns the factory now.” Lyle Heimbigner, Ritzville, Wash,: “My best purchase in 1980 was John Deere's soft black paint. When thinned 50% with paint thinner it applies fast and easy to disk blades and header platforms to prevent rusting. The real beauty is that it's selfscouring and the price is right,” Lyle
Dale D. Bruns, Chappell, Neb: Dale nominates his John Deere 4840 tractor as a best buy. ‘In 1,500 hrs., this has been a basically trouble free tractor. Plenty of power, easy to operate, quiet. Like the hydraulic controlled seat.” Jack Varner, Jr., Tallulah, La.: “Can't keep the disk blades tight, the T. 9 464 > PAPAS @aesewatar -~as page) mud scrapers come loose and stop the seed flow, and it's made from very light material,’’ says Jack, disappointed with his 28-ft. Crustbuster double-disk opener grain drill. “We've asked for help from Crustbuster representatives and can't get help. We have two more Crustbuster 28-ft. drills — the hoe type — and we are very satisfied with their performance under any circumstances.” On the plus side, Jack’s pleased with his International 3588 tractor. “Versatile, with 10 to 15% less fuel consumption and easy maintenance. Very pleased with its performance. Does the jobs that any dual wheel tractor does with less compaction.”
Phil Armstrong, Onca, Neb: ‘I bought a Farmhand 258 loader because they are supposed to be easy to put on and take off. I guess it would be if you had a perfectly level cement slab to do it on. Also the bucket doesn’t tip back far enough to keep anything in it.” Phil nominates his Deere 4440 tractor as best buy. “This 4440 is by far my best purchase. Real handy and easy to run for the horsepower. wouldn't know about service as it has never had to be in the shop.”
Garnet Grimm, Shellbrook, Sask: “Cleans just about everything. Does a great job!" says Garnet, pleased with his Deere 18A high pressure washer. “It really takes the dirt off machinery, pumping 520 psi at 1.8 gal. per minute. Light to pull or carry around, takes little space to store. No troubles at all with it.”
Mark Holl, Evansville, Minn: ‘My best purchases are a 588 White plow and a 15-ft. White Kwik-Cut soybean header. The 588 is practically impossible to plug with its 20-in. bottoms. Stalk fields are as black as most that have been chopped before plowing. The Kwik-Cut head allows faster field speeds with less shatter loss and is easy to repair because sections bolt on with 1/4 in. bolts.” Mark says his worst purchase was his “model 18A John Deere power washer. It's always been hard to get primed. Won't draw detergent from the reservoir and was at the dealer's for months but they never looked at it. I took it home and put a new solenoid valve in but it still did not help. It's awkward to move around and is overpriced.”
Harold Hawthorn, Foresters Falls, Ontario: ‘My ‘worst buy’ in 30 years of farming has been my new 1980 model 5540 Hesston big round “With the help of a good dealer and a good service man from Hesston, succeeded in getting my hay baled. However, wasn't told that this baler would not bale straw. “After every bale of hay, I have had to clean out loose hay that works up through belts and can't get out. The pickup will immediately selfdestruct if it picks up a handful of tough hay — we demolished it twice in 600 bales. The automatic twine tie is not dependable. If there isn't 1800 psi in the tractor hydraulics, the tailgate won't lift, which blew the pump on my Case 730 tractor and cost me $300 before even had the baler in the field, [had to run the new pump 300 lbs. over maximum before it would lift it. Obviously, the 5540 was not designed to function on all tractors. [ feel this Le ae baler should be recalled and redesigned. “My ‘best buy’ in recent years is a used John Deere combine. It just keeps on operating without problems. A pleasure to have it in the field,’ Harold concludes.
Raymond Schoen, Ft. Smith, Ark: “Everything bought from John Deere in the seventies turned into lemons,"' says Raymond, nominating Deere’s 4400 combine, 4430 tractor, his field conditioner and a 20-ft. disc. “The combine would throw over too much grain. The 4430 tractor had bad hydraulics the dealer says can't be fixed. The conditioner filled with trash and we had to make major repairs the first season on the disc. I've traded everything except the tractor, which I plan to fix myself if it can be repaired.” Raymond is pleased, however, with Case's 2670 4-wheel drive tractor and his two TR 70 New Holland combines. “This is my third 2670. I have two at this time. It has plenty of power, is built to last and used less fuel and costs less to buy than the Deere 8640. Good dealer service, “I've cut 8000 acres with the two TR 70's and have had fantastic results from them, They may last until retire, he concludes,
Paul E. Bline, Mechanicsburg, Ohio: Paul's four “best buys" are his John Deere 7000 Max Emerge corn planter, his White 588 plow, his White 271 23%-ft. dise and his Miller offset disc. ‘All four of these implements were recently purchased. Had a very even stand with the corn planter — the depth setting is great. The White 6-bottom plow does an excellent job and the new White 271 disc is flexible and also does a beautiful job. My Miller offset disc is especially good on hilly stalkland areas for conservation tillage.”’
Leo Wilcox, Camrose, Alberta: ‘In May 1976, I bought a new Ford 8600. Within a few days, due to water in the system, the brakes failed. In July of the same year, the transmission locked up because a bracket broke and went through some gears. Also, the mechanic found a spare clip in the bottom of the transmission, The bracket that broke had primer paintin a crack in the bracket. This had to bea faulty part put in at the factory. From May 1976 to Sept. 1976, we were able to put 67 hours on the tractor. “In June of 1977, the clutch became very rough and jumpy. When it was dismantled they found the clutch plate split from center to outside. In April 1978, the clutch again went out due to a lot of rust and corrosion. ‘In November of 1978 I traded the 8600 off on a 4240 John Deere. At trade-in the Ford had 1256 hrs. on it. This tractor caused me more trouble than all the other machinery I ever had.”
Forest R. Kline, Barry, Ill: “The John Deere 7000 conservation planter does the best no-till job of any I have used. However, I could not get what I ordered. It’s only a straight 7000 planter with different coulters and cast iron press wheels added.”
James Neuhalfen, Lacon, IIL: James likes his Deere 4840 tractor. ‘It replaces a John Deere 6030, It's the best handling and riding tractor I've ever driven, with no mechanical problems. There's not quite as much power there but you can do more work because you're willing to put in longer hours.
Wilbur Warner, Independence, Kan: ‘I'm well-pleased with my White 4-210 tractor,”’ says Wilbur. “I put M & W twin turbochargers on it, which increased pto horsepower from 188 to 240 with the same fuel setting. It also lowered the exhaust temperature. Am also real satisfied with my 7700 John Deere combine. It has the flexible header and really gets down and saves the beans. In addition, my Crustbuster Posi-Depth drill does an excellent job of sowing soybeans and wheat.”
Robert Wakefield, Homer, IIl1: “For the first time I can combine beans and relax at the same time,” “best buy" 454 John Deere row-type bean head. “It saves more beans with minimal maintenance. I can combine faster because it feeds more even."
Roland Bilson, Eureka, Kan: “This baler will not make a uniform bale. One side is always longer than the other regardless of how you adjust the baler. The plunger head is too light and all universals on the drive have had to be replaced with heavier ones,” Roland says about his “worst buy” John Deere 346 baler. ‘We're also disappointed with Amway spray adjuvant. It seemed to reduce the ef Best And Worst rather than helping it."
J.F. Leatherman, Healy, Kan: His “worst buy" nomination goes to a used John Deere 6600 combine. “The day after we bought it one rear wheel fell off, ruining the hub bearing and spindle. Then, the engine wouldn't run at full rpm. Every day there was some kind of breakdown. A year or so later the rear axle broke in half. You never know which bearing will go out as they are sealed, You run them until they give out. Dealer service is good but it's a continual hassle guessing which bearing we will have to purchase and replace." Walter Wittwer, Chowchilla, _ Calif.: ‘‘This combine does the cleanest job of any combine. Grain is clean enough to be able to use for seeding. Also, sends less out the back. Had some problems with combine sheaves, but excellent dealer backup,” says Walter about his New Holland TR 85 combine. “On the minus side, we've had trouble with our Case 4490 4-wheel drive tractor,” he adds. ‘‘It steers hard and I've had nothing but trouble with the steering system. It also does not have the power it should have for a 4-wheel drive. Hard starting also bugs me. Only good thing is the dealer stands behind it.”’
Larry Ross, Woodslee, Ontario: “I've had Love floating cutterbars before but this 20-ft. bar on my Gleaner combine has given me quite a bit of trouble,” reports Larry. ‘The pitman bar and bell crank has broken twice and the sections with countersunk rivets keep coming loose. The guards are the only thing on the entire knife that will stand up to hours of work. The divider noses on the end of the knife are cheaply made, though, and should not be supported on a guard. The divider keeps breaking away at the guard it's attached to causing the divider to swing sideways and either break a section, or break the knife.” Larry's well pleased with his new 4640 John Deere. This tractor has surpassed my expectations. The hydraulics and engine torque are excellent and fuel economy very good. Under the hardest working conditions, the tractor burns 6 gal. of fuel per hour and as low as 4% gal., handling a 27-ft. cultivator.”
Russell Hunink, Clymer, N.Y: “It's possible to kill a few flies with it but you have to drown them with it. Very ineffective,” says Russell, disappointed with “Whitmire Flys-Off dairy aerosol insecticide.” On the plus side, Russell has three nominations for “best buy”. The first is his WIC 30 bu., battery-operated silage cart. ‘‘We've used it for over a vear, unloading eight hours a day, with almost no problems. It's a much simpler cart than a previous one of a different make. “Another good buy is our Deere 4240 tractor with power assist front wheels. The cab is both comfortable and quiet. The large cubic inch engine responds at all speeds and the power front-wheel assist has worked well in pulling through soft spots in the fields. It's easy to handle, making it an ideal tractor for my wife and daughter to drive. “We're also happy with New Holland's 2438 tandem axle running gears,” he adds. “They're well-built and travel well on the road, besides carrying loads well on soft ground.”
John Barendregt, Union, Ontario: He's disappointed with his Forest City Do-All 26-ft. cultivator. “It does a fair job but wears out too fast. If we wanted to put it back in the field, we'd be looking at a large cost to get it back in shape. The reels kick stones that stop the reels and make the field a mess. Distributor and dealer were no help at all.” On the positive side, John says, “Our A & L grain cart with 425 bu. capacity is the best investment we've made for harvest in some time, It increases the capacity of our 7700 Deere combine by one third to a half. The cart was well-engineered before putting iton the market, with a hydraulic shut-off valve that works super and is built extra heavy on the stress points.”
William Menold, Dunlap, IIL: "I'm impressed with the tremendous capacity of this machine. Because of the spring-loaded belts and chain tighteners, grease banks, and the sealed bearings, the time spent to service it is small. There have been no breakdowns in 1,100 acres, Easy to operate and drive comfort is excellent,’’ William told FARM SHOW about his ‘best buy" John Deere 7720 combine.
Joe Kalvoda, Mandan, N. Dak: Joe nominates three “best buys’’ — John Deere 4630 and 4430 tractors, and a 1979 Ford Fiesta. “In 2,500 hrs., the 4630 has never lost an hour of time. The 4430 has been in the shop only once for minor repairs. Both are a pleasure to drive. We've found the Fiesta to be an economical car, getting 30 to 35 mpg on short runs and 40 to 45 on the road.”
Dennis Slattery, Hicksville, Ohio: purchased a John Deere 4420 combine last spring for wheat and then used it in corn and soybeans. This machine has had unending trouble with V-belts. Then, in the feederhouse, it started back-feeding under the sprockets and feeder chain. It did this even in wheat straw but “T feel John Deere owes me a new machine and should take this one back.” was terrible in soybeans. Would plug up about every hour and bend the adjusting bolts, plugging at the head so badly you had to chop the straw out with an axe. The dealer worked on it many times to no avail. It also uses a quart of oil a day and the water pump went out. “The machine has 240 hours on it now and is still in warranty. Dealer wants $10,000,10,trade for anewoned feel John Déere owes me a new machine and should take this one back.”
Cyril Schank, Fallon, Nev: Cyril's happy with the Ford 6600 tractor he bought last year to work alongside three other Fords in his “tractor stable’. ‘We have a Ford 4000, 5000 and 9600, besides the new 6600, Maintenance is much easier on the Fords and many parts interchange. We especially like the way the 6600 runs our 466 John Deere pto baler. It turns out 100-Ib. or better two-wire bales that are uniform and just what the hay truckers and buyers want. “We average about 600 hrs. per tractor per year, using the 6600 and 4000 daily to feed cattle. The 5000 has a cab and is turbo charged. With about 7000 hrs. on it, it’s never been overhauled and does all our plowing. The 9600 was pur- chased used and does all our disking, ripping, haychopping, and pulls a 14-ft. Towner scraper.” On the negative side, Cyril's disappointed with his Long 460 42-hp. diesel tractor. ‘‘We had purchased our second hand Ford 4000 the year before and used it to do the same work as the new Long 460, which cost nearly twice as much as the Ford with 4,000 hrs. on it. Today, the Ford is still going strong without having had a fraction of the maintenance needed on the Long. “When we could get the Long started it was fine, but half the time it wouldn't start. The first year, while it was under warranty, several things failed, including the pto clutch, electrical system, and battery. They were good at fixing it up for us but the down time was costly. After the guarantee ran out, it lost still another clutch and had more breakdowns that always cost $500 or more to fix. Getting parts was slow. It doesn't pay to buy foreign equipment.”
James Neuhaefer, Lacon, Ill: “It's tops in my opinion,” says James, pleased with his new John Deere 4840 tractor. “It replaces a Deere 6030. There's less power, but you get more work done because it's one of the best handling and riding tractors available. You're willing to put in longer hours.”
Clifford Osthus, Sioux Falls, S. Dak: “These tires were on a 4240 John Deere tractor I bought one year ago," says Clifford, upset with his Goodyear tires. ''Cornstalks punctured the two rear tires and nage) both had to be repaired at different times. The front tires had flaws in them and, after 300 hrs. of use, they began to show where they had been spliced together, so I replaced them." Clifford's had good luck, though, with his John Deere grain cart. “It’s great at getting corn out of the field when ground conditions make it impossible to drive a truck in the field, such as in snow or mud. Ordinary wagons are much harder to maneuver under these conditions. In fact, a good truck and this grain cart are all that is needed to harvest corn, beans or small grain.”
Dale K. Moore, Stromsburg, Neb: “I'm very unhappy with the way this planter plants milo seed,” reports Dale, upset with his John Deere Max Emerge 7000 planter. “We continually get 10 to 15-ft. skips unless we go to small seeds. have contacted dealers and district men and always get the same story, that an improvement is on the way. But it never comes." Dale's pleased with another product that he first read about in Bo-Bar wick applicator for applying Roundup to shattercane and volunteer corn in 500 acres of milo and beans. We got good control of both weeds in both crops. We're also pleased with the use of Bicep at planting for control of shattercane in milo," Joseph Dugan, Jr., Roblin, Manitoba: ‘'The teeth are poor and bend very easily,” reports Joseph about his “Crown reel-type stone picker. The company hasn't been of any help in solving the problem,”’
Quinton Nelson, Stitzer, Wis: ‘'It's just like driving a Cadillac,’ says Quinton about his 8700 Ford tractor. “Lots of power and easy on fuel. Both the cab and hydraulics are super. No breakdowns in 18 months, ‘We're pleased, too, with our 6620 John Deere sidehill combine purchased last fall. Works great, with well-designed cab and controls. Runs smooth and comfortable. Also, our John Deere 7000 Max Emerge is the best planter we've ever used."
Richard G. Spangler, Wilmington, IIL: “The combine we bought had to have been made from rejected parts,” says Richard, upset with his TR-70 new Holland combine, purchased new in 1978. ‘‘The main shaft was bad, the motor threw a rod, bearings broke, the hydraulics leaked like a sieve, belts broke, and chains snapped.” Richard likes his Deere 7000 12row planter. “It’s accurate, easy to fold when going from field to field.”
Robert P. Nelson, Clear Lake, Wis: “I've replaced the motor for the second time and it already uses oil," reports Robert about the 7 hp Tecumseh engine used in his Massey Ferguson lawn mower. “Another neighbor has already put in a second replacement and another had a Briggs and Stratton engine put in his.” On the other hand, Robert nominates his John Deere III lawn tractor as a “best buy’. “It starts easy, has plenty of power, does a good mowing job, has a good selection of gears, is easy to operate and uses no oil."
Pierre H. Glanzer, Huron, S. Dak: “The carpenters can walk away when they're done but I’m stuck here and have to live on with it,” says Pierre, upset with his pole barn supplied by Lampert Lumber Co. Pierre is pleased with his 2240 John Deere tractor. “It has a three cylinder diesel and is the best fuel-efficient utility tractor we've ever had. It has 50 horses of power for the bigger jobs like corn cultivating, yet works great with a loader to clean out cattle sheds. Great to have a tractor that seems torun forever on a tank of fuel. “Our Ford 6700 is also fuel efficient, In addition, it has the best cab for a smaller tractor in the industry. Works great for drilling, planting, dragging, baling, and anywhere else high horsepower is not needed."
Kenneth Juergens, Weston, Mo: Kenneth likes his John Deere A-25 high pressure sprayer. “Does a great job of removing dirt and grease from equipment. It's nice to remove grease from an area of equipment about to be worked on, as you don’t get your tools so greasy. An added bonus is that it also does a good job of stripping loose paint from buildings. I understand some professional painters now use high pressure water sprayers to remove loose paint instead of scraping or sand blasting.”
Donald W. Parker, Apple Springs, Tex: “This tractor was in the shop two months out of 12. can't use “This tractor was in the shop two months. I can’t use equipment like this.”’ equipment like this,’ says Donald about his Ford 6700 tractor. ‘‘A reliable dealer could have prevented many of the problems.” He's pleased, though, with his Deere 4040 tractor. ‘‘Handles like a dream. Had one minor problem with . hydraulics and the dealer sent a mechanic out and had it repaired with only two hours down time.”
Duane Burrow, Fairmont, Minn: He’s pleased with his Deere 2500 automatic reset plow. ‘Have used it two years in rocky ground and haven't broken a part or lost a bolt. Also like our Deere model 61 chain saw, which has a surprising amount of power for its size and is great for trimming. “FARM SHOW is also one of our best buys. We think it's the best farm magazine out."
Glenn E. Parks, Goleta, Calif: “Like the simple touch-on-the-go 4-wheel drive,” says Glenn about his John Deere 2240 tractor. ‘‘When any hill or ditch gets in the way, just push the button and you're in 4-wheel drive, When past the obstacle, another push of the button and you're back in 2-wheel., Excellent one-finger power steering, hydraulic brakes, and more.” Glenn has no “wo he's generally disappointed with the quality of chain saws on the market. “Manufacturers make them too cheap. They won't stand up due to the use of plastic parts.”’
James A. Grantham, Kearneysville, W. Va: “This is the best farm tool we have ever had and we do everything with it,” reports James about his John Deere 125 skid steer loader. “Built heavy enough to do what we need it to do, Everything from scraping feedlots to burying dead livestock and lots more in between. "We were disappointed with Top-O-Bond cement mix we used in our dairy barn. It's slow to set up and dry, and doesn’t stand washing very well.”
Gary Dean Nelson, Martin, S. Dak.: ‘‘In 1979 we windrowed 700 acres of winter wheat and 100 acres of wheat grass for hay. We had not one minute of downtime, and didn'teven lose a sickle section,"’ says Gary, about his International model 75 18-ft. pull-type windrower. ‘‘This year, we windrowed 140 acres of wheat and for the first time since we bought it, put in new sickle sections, but that is all.” He's unhappy, though, with a 30-ft. Morris rod weeder with hydraulic wings and round rod, bought in 1978. “IT never had actual breakdowns, but I could not adjust the rods. They were level in the ground but not at the same depth. sold the Morris rods and bought two 14-ft. John Deere rods and am satisfied now. Also did not feel the round rods performed as well as the square rods do.”
Robert Boots, Hudson, Ind: ‘'It's easier to set the amount per acre than older drills and much easier to change the feed gates from wheat to soybeans. We also like the large grain boxes which save time on refills,” says Robert, pleased with his John Deere 8300 grain drill. ‘We've used the drill as part of a minimum tillage system. We use a chisel plow pulling a double disk harrow to work our ground after we have combined soybeans. Then, we go in with our drill, pulling the harrow up front and a cultipacker behind and have the seed in the ground in just two operations. Saves fuel and time.”
John Collins, Simcoe, Ontario: “At purchase time, the tractor was reading 151 hp on the dynamometer. After 100 hrs. break-in period, the horsepower reading is still the same,"’ says John about his “best buy” John Deere 4440 tractor, ‘The tractor which has a very organized and quiet cab, handles our Deere 5-bottom 2600 semi-mounted plow easily. It handles the plow at 62 mph ata depth of 7 in. with an 18-in. furrow setting. “This plow, too, is everything Deere says it is. We no longer have problems going behind the combine in tall cornstalk trash. With the plow bottoms placed behind the beam there is unlimited trash clearance."
John Hightower, Mt. Pleasant, Iowa: He's upset with his GSI 5,000 bu. grain bin. ‘First the fan motor burned out, then the Stirator quit working. They came three times and got it working again, The auger wore the flighting out the first year. When we emptied the bin, the unloading auger motor pulley broke in half. The pulleys were cheap, pressed tin that just wouldn't hold up. ‘My best buy is not new, but a used John Deere 730 diesel tractor, one of the last two-cylinder models,” Jack continues. ‘This tractor starts and runs like a new one, but it uses less than two gal. of diesel per hour, pulling a 4-14 in. bottom plow. My Farmall M, by comparison, uses three gallons of gasoline per hour pulling a 3-14 in. plow. John Deere should start building these tractors again.”
Dale Woods, Reed City, Mich: “You can put up more hay in a shorter time when the hay is at the right stage. Let's you get the best protein content, It's also a labor saver. Very efficient!’ says Dale about his New Holland 851 baler. Dale has no “worst buy” to report, but notes, ‘We bought a used John Deere combine this year because of the enormous prices for new ones. The price we get in return for our farm products is so uneven in comparison.”
Jarrell R. Cagle, Rome, Ga: He's had problems with his Lely spray monitor. '*The monitor box I received was faulty. The second monitor was one hauled around by an area representative for demonstrations, instead of a new one. The area rep never did get the monitor to work like the company claimed, After several different tries al getting it to work, I discarded it. The rep still has not returned a pressure gauge that was bad. It has been several months.” A good buy has been his John Deere 7100 Max-Emerge 6-row planter, “A good, trouble-free planter that plants fast and accurate. Had good dealer service.”
Glenn Metz, Tama, Iowa: “Bought it last fall and have had good luck with it so far,”’ says Glenn about his John Deere 510 baler, “Like the new features — the belts, counter, and sealed bearings.”
Larry P. Cutler, Macon, Ill.: ‘The Max-Emerge did a fine job putting the seed in at a uniform depth. Got the overall best population stand I've ever had,” says Larry about his Deere 8-row planter, equipped with a Dickey John DJ35-8 monitor, ‘‘The peace of mind of knowing that the planter was planting, thanks to the monitor, was really nice.”
Richard Olney, Quincy, Mich: Richard's three “best buys" are his John Deere 7000 Max-Emerge planter, his Glencoe harrow tine cultivator, and his International 1486 tractor. “The planter is accurate in spacing and depth, even at a slow speed. The markers work good, it’s easy to fill and makes a good seedbed with almost no preparation. I like the cultivator because you can travel at a good speed even in rocks without breaking teeth. The tractor is easy to handle with lots of power. Like the brakes.” On the negative side, Richard notes that the International 400 Cyclo — planter he had before the Deere “gave us problems. It had poor spacing and depth. You had to keep up the air pressure and, on some ground, that was hard to do, Also, the markers were always a bother, lifting the wrong way."
Harry Lee Klever, Fullerton, N. Dak.: ‘This is a good product simply because the person who built it was a farmer, and had to use it him“A good product because the person who built it was a farmer and had to use it himself.”’ self,’ says Harry, pleased with his Jiffy self-roll truck tarp from Galvin Mfg., Minot, N. Dak. On the other hand, he’s upset with his John Deere 6600 combine. ‘The foot clutch goes out once a year. Every belt tightner has failed. Even the unloading auger went out that probably runs only 20 minutes a day, I feel the cause is too much cost cutting in the manufacturing.”
Herman Fink, Delmont, S. Dak: “I nominate my John Deere 200 stack wagon as a best buy,’’ says Herman, “The hinged paddles and the live chain tailgate really make this machine a joy to operate compared to older models. The hinged paddles seem to take rocks much better than the straight paddles did.”
L.D. Murphy, Plainville, Kan: He's unhappy with his Vermeer 605-F baler. “I had a 605 Super C baler for three years and had no trouble but the 605-F had light bearings and shafts that went out. The pickup is a joke, with only four rows of teeth, Won't pick up light windrows; in heavy windrows, it breaks out teeth, bends teeth bars, and loosens bolts out of teeth bars. New balers now have five rows of teeth, but the dealer doesn't want to trade because no one wants this baler’s four rows of teeth.” Murphy's also had trouble with his Sunflower 15-ft. undercutter, ‘‘We have adjusted and readjusted and still the shanks won't go the same depth inthe ground. Won't stay inthe ground if it is only a little hard.”’ He's been pleased with his 2280 John Deere swather. ‘Have had no trouble with it, replacing very few sections. “A pair of 4240 Deere tractors, both equipped with Deere 158 loaders, have also been best buys. Good power for their size and the powershift works excellent. Have only had two hydraulic oil leaks and the dealer fixed them the day they happened. Deere loaders are built tough and are easy to take off and put back on.”
Leonard Keeven, Lincohton, N. C: ‘It's the best machine purchase I ever made,” says Leonard about his New Holland 1033 bale wagon. “It eliminates the need for labor in making hay. The machine paid for itself in the first year. “My 1630 John Deere disk-harrow was one of my worst purchases,” he adds. “The harrow simply will not cut and level like it should. No comparison with an offset harrow.”
Joe Doyle, Holton, Kan: “I would list the chemicals Sencor and Lorox as the poorest chemicals we ever used,” says Joe. "My biggest complaint, though, is the lack of ‘preparation service’ on new equipment by the dealer before it is delivered. Our John Deere dealer, however, is excellent on preparation. “On the best buy side, our Oliver 265 plow disk has been a good, tough tool for us, It’s our best buy.”
Allen Nuffer, Beaver Creek, Minn: “The hydraulic seat is a pleasure to ride in, the cab is extremely quiet and the quad-range transmission shifts smoothly. This tractor handles beautifully,"’ says Allen about his 4240 John Deere tractor. “On the other hand, my 2840 was the worst buy I've ever made. Poor workmanship overall. found an oil seal out on the transmission, the hydraulic system's pump was too small, and the head gasket on the motor leaked water. Service was great, though. Too bad Deere’s allowing only one dealer per county.” ({-(,— FARM SHOW (13
Dale R. Hallett, Carstairs, Alberta: Dale's disappointed with Lutalyse by Upjohn Chemical Co., the synthetic hormone for synchronized breeding in cows. “We followed directions very closely. The cows were all palpated to be certain they were cycling and injections of Lutalyse were made as per instructions, The cows were on lush pasture and in good condition, with mineral supplements. At the prescribed time, they were artificially inseminated two consecutive days by qualified technicians. The results: One calf out of 24. This kind of conception rate not only gave me a number of late calves, an added expense of about $30 per cow, but the loss of time with no added return.” Dale nominates his Red-D-Rod wire stretcher as a “best buy”, ‘‘It’s light and compact for fast, easy fencing. Excellent for splicing wire in the center of a fence and for tightening wire to a corner post. I carry it all the time with me in the pickup.” Robert S. Eaton, Port Williams, Nova Scotia: ‘‘! grow 12 or 13 different vegetables and have been able to use my John Deere 71 Flexi-Planter for good, even stands in all of them, says Robert. “I use a scatter shoe for such things as carrots, beets, radish, onions, parsley, turnips and cabbage. This is really a versatile machine.” Also on his “best buy” list is a 350 Universal tractor. “It's especially useful in the orchard in the fall. It's 3-pt. hitch action is uniform and gentle. Requires little maintenance — great for all types of work around the farm, We're pleased, too, with our FMC John Bean 3-pt. hitch orchard sprayer. We use it for spraying 40 acres of orchard. We added a detachable boom on the back of the machine to enable us to spray vegetables. The blower distributes the foliage and enables spray from the boom to cover both the tops and undersides of the leaves. Works real well. Boom can be easily removed."
Gene Ishmael, Flemingsburg, Kty: Gene's “best buys” are his John Deere 700 grinder-mixer and his Boumatic milking system. “I like the hydraulic feeding auger on the grinder-mixer. Does a good job of grinding and with the flat bottom mixing tank there's no clogging problems. As for the milking equipment, it cut down our milking time and is easy to operate. Does a good job and is easily kept clean. The dealer gives good service.”
Carl Berendt, Clarksburg, N.J: He's pleased with his John Deere 4440 tractor and Deere 220 power flex disk harrow, bought new last year, “The tractor has a great cab and seat, as well as good power. like the quad-range transmission and the good hydraulics. As for the harrow, it has covered 1,500 acres with only one bearing replaced."
David Norris, Palmetto, Fla: “We've hauled more than 500 loads from our 600-cow dairy with no troubles,” says David about his “best buy’ 200-gal. Lely honey wagon. “We're also pleased with our John Deere 336 baler, In three years, it has baled 15,000 bales a year and been almost trouble-free. We also like our 1977 Ford 150 pickup with supercab. Rides great and hauls loads well — 55,000 carefree miles so far.’’ On the minus side, David's disappointed with his ‘‘Vacmeer milking vacuum pump. It corrodes from hard water, and needs repair every few months. There's no repairman in the state to do the job right.”
William D. Schneider, McDavid, Fla: “It wouldn't level from the start. After the factory man had finished with it, it still wouldn't level," reports William who's disappointed with his John Deere 220 disk harrow. “We finally re-did the front gangs and got it to work fairly well. The bearings have been going out too soon, though, One goes out about every 150 acres disked.”’ On the plus side, William says his Case 2590 tractor has been a “best buy.” “It has good lugging power and uses only 8 to 9 gal. of fuel per hour despite its 188 hp. When it was in the shop, they offered to bring out another tractor for my use while it was down, but I didn’t need it. Excellent
Scott Swanson, Ollie, Iowa: “Anytime it’s below zero and the wind is blowing, these waterers freeze up,’ says Scott about his Pride of the Farm two-drink hog waterers, “Also, the thermostats sometimes stick wide open and bring the water almost to a boil. For as much as they cost, they do a poor job." On the positive side, he’s pleased with his John Deere row crop soybean head. “It allowed us to harvest more acres and, at the same time, get more of the beans in the tank instead of leaving them on the ground.”
John Hodil, Glenshaw, Penn: ‘'l wouldn't say it’s my worst buy, but “No-plug mowing at its best.” it’s the roughest riding truck 1 ever owned and the worst gas hog," reports John about his C20 Chevy 4 by 4 1979 pickup. He adds that he has two recent “best buys’’: “With our 7-ft. New Idea Cut-Ditioner, the last cut in heavy tangled hay on our narrow strips is no longer a problem. This is no-plug mowing at its best. We're also well pleased with our John Deere 2240 4-wheel drive tractor. It’s more than we expected. No more two-wheel drive tractors for me.”
Tim R. Cowan, Turner, Mont: “The pto shaft going into the gear box is not a splined shaft. Instead, it has a sheer pin that breaks every time it hits a rock. If that one doesn't break, the one on the auger does so you are constantly fixing one or the other,” says Tim, disappointed with his John Deere No. 3 post hole digger.
Edwin Demory, Shepherdstown, W. Va: He's well pleased with his 316 John Deere lawn and garden tractor, bought in the spring of 1979. “It's performed beyond expectations mowing grass and in snow removal, and has needed no parts to date.”
Arvine Brown, Richland Center, Wis: [e's had some trouble with his Gleaner F combine: ‘A shaft on a header pulley wasn’t lined up, along with a lot of small things that I call ‘poor’ workmanship. But our dealer has been real good to correct problems.” On the plus side, his John Deere 4040 90-hp. tractor gets his nomination for “best buy’: ‘I’ve,owned the machine for 18 months and everything worked from the day of delivery. Handles well, and is easy to start in cold weather.”
Eugene Lucier, Good Thunder, Minn: ‘We're disappointed with an 8-cu. ft., 3 pt. hitch cement mixer from Tractor Supply,”’ says Eugene. “The drive mechanism is too lightly built to handle the load required. After multiple annoying breakdowns, we've rebuilt it out of heavier materials.”' On the plus side, Eugene is happy with his John Deere 90 skid loader. “The machine's big enough to use out in the dirt and gravel, yet small enough to use inside. It’s been trouble-free.”
Lloyd W. Hahn, Sigourney, Iowa: “ haven't mowed more than five acres without a breakdown of some kind. Sickles break or the lift won't © operate. The dealer has tried to help but this is just a poorly designed machine,"’ says Lloyd about his “worst buy” John Deere mower with a 9-ft. bar. "We like our John Deere 336 baler with a thrower,” Lloyd adds. ‘Have had no problems at all — it’s always dependable. Dealer service is good.” Also on Lloyd's “best buy” list are his New Idea 272 Cut-Ditioner and his White 7300 combine. ‘‘The CutDitioner gives us trouble-free mowing with low upkeep. Our combine is simple and easy to work on. A dependable machine with good dealer service."
Andy Myers, Dallastown, Penn: He's had problems with his John Deere 250 grain drill, ‘We can't seem to get the drill to sow the amount of grain we set it for. I set the drill for two bushels of oats and got four bushels instead. Also, the fertilizer doesn't hold out right. I had the dealer look at it and he couldn't find anything wrong. Drill seems sound otherwise. “I'm very pleased with my 185 Allis-Chalmers tractor. Traded a same-size International unit. Handling and fuel economy are great, and the AC actually outperforms the Farmall. Only problem was dirt in the fuel tank, but the dealer fixed it the next day.”
Scott F. Rankin, Dodge City, Kan: “My dad surely picked a winner when he started power farming with John Deere in 1928. I’ve stayed with that line of implements throughout my farming life and, while one or two purchases were not up to what I expected, I would still rate them ‘fair’. I couldn't downgrade the John Deere line in any way,"’ says Scott, who adds that “I really like FARM SHOW, too.”
Alan L. Sloan, New Boston, Ill.: “We tried, both in cornstalk ground and in plowed ground, to disc without ridging with no success. We even had the dealer who sold us the disc try to operate it so it wouldn't ridge, but to no avail. We finally traded it in on another implement,” says Alan, disappointed with his 12-ft. Wilbeck offset disc. On the positive side, he nominates two “‘best buys’’ — his Kewanee 1000 series flex-wing disc and Deere’s 6-row 7000 planter, ‘This disc does a better job cutting through trash and leveling the ground than any disc I've ever owned. Only problem is the scrapers, which leave a little to be desired. As for the planter, after getting the bugs out the first day, it has done a superb job of seed placement and depth control."’
LeRoy Venvertloh, Quincy, Ill.: ‘We've been buying John Deere since 1938 and are happy with everything but their 220 disc and harrow,” says LeRoy. ‘After only one season, the cylinder pins are worn out and the cylinder hoses are rotten. The main frame wear plate breaks and doesn't make a good seedbed. The Deere harrow on the back will not allow the disc to get within 2 ft. of the fence. It should fold up like other makes.”’ On the plus side, LeRoy nominates his Deere 7000 Max Emerge planter as a best buy because of its even spacing and depth of planting.
James H. Newton, Edmeaton, N.Y: “The 950 is not just a garden tractor. use it to unload full wagons of silage and for other work, too,” says James, pleased with his John Deere 950 tractor with mower. ‘For a tractor with a three cylinder diesel motor, this isa smooth workhorse. Uses little fuel and even mows the lawn when the grass is wet.”
Thomas Pearson, Hudson, Iowa: “We had only one malfunction all season — a small valve in the diesel pump — and that was replaced quickly by the dealer after a call,” Thomas reports about his ‘‘best buy”’ Deere 8820 combine with 20-ft. platform and 8-row corn head. ‘A high capacity and efficient machine, both in soybeans and 170 bu. corn." He's not happy, however, with his Vermeer 900 3-pt. hitch backhoe. “Basically, it's a fine piece of equipment, but will not function using the tractor hydraulic system, as it is sold to do. It doesn't have any digging power, swinging too fast and jerking the tractor. We tried different tractors with the same results.”
John Hoying, St. Henry, Ohio: “They told me there was nothing or they could do to solve the problem, and that I would just have to put up with it,’ says John, upset with his John Deere 2440 tractor with a model 146 loader, “The valves leak badly and the loader won't stay up. I've had two new hydraulic pumps put on and three different valves replaced and it still leaks.”’ High on his ‘best buy"’ list is his Badger silage wagon: “It works quiet and smooth. Repair parts are easy to get and service is excellent. “Another good buy was the Demco liquid fertilizer pump on our corn planter, Simple, easy to maintain and nothing to wear out,"’ John reports.
Ralph K. Sutton, Hunter, Kan: Heading his “‘best buy” list is his John Deere 4440 tractor, outfitted with a Farmhand 258 manure loader and 8-ft. bucket. “The tractor is one of the better 130-hp tractors I've ever owned. Service has been excellent. As for the loader, the bucket bent right after bought it but Farmhand replaced it at no cost to me so!'’m well satisfied with both purchases.” On the negative side, Ralph’s had trouble with his 1980 GMC Sierra Grande 4 by 4 pickup. “The company doesn't seem to equip these pickups for a farmer using them as a workhorse in mud and snow. The tires that come on it are suburban tires that fill up with mud and won't clean. Had lots of problems."
Marshall Alford, Jr., Moores Hill, Ind: Marshall's pleased with his Deere 7000 Max-Emerge planter. “Spacing and depth stay the same regardless of what speed you are going. A pleasure to use.”’ He also nominates ‘'Trazco soil penetrant” as a best buy. “I used it on 30 acres last year and the field was drier — not muddy like the rest of the fields. We had a wet fall and the treated field was easier to harvest. This year, I’m using it on everything.”
David C. Moore, Coleman, Mich: “It's a ‘boss’ alright. When it doesn't want to run, it won't,” says David, upset with his “worst buy’ Stihl 041 Farm Boss chain saw, “It hasn't run right from day one. We've had it to two different Stihl dealers and it still doesn't run right for more than one tree. This is our first and last Stihl saw.” David also reports that he’s had problems with “six two-speed electric motors made by Marathon Electric Company, of Wausau, Wis. They came with a Northco ventilating system for our hog barn. Out of the six motors, three are in the junk pile and the rest have been re-built.” Heading David's ‘best buy” listis a used John Deere 5020 tractor. ‘‘Although it had 4,000 hours on it when! got it, the only repairs it has needed in two years’ use has been a $5 oil line. Drives as nice as a small tractor."
Joseph Heim, Dell Rapids, S. Dak: “It's a little lighter than the John Deere I had and has performed real well. The Kohler engine gave me trouble, though," says Joseph, who's well pleased, nonetheless, with his Lehman skid loader, powered by a Kohler engine. ‘First, it was out of time and hard starting. Then, the head on one cylinder came loose so a gasket blew. Both times, though, the service was super and problems were fixed in a short time. One other negative is that the throttle, switch and choke levers are in an awkward position."
Mark Douglas, Fredericktown, Ohio: ‘The knife sharpener and shear bar require a fraction of the time to set that our old machine did,” says Mark, happy with his John Deere 3940 forage harvester, ‘‘Handles the crop well with a uniform cut, and has electric cab controls that really work. Low maintenance except for hard-togrease heads. ‘We're also pleased with our Better Bilt manure pump. It does just what the dealer said it would do, busting up solids and loading out fast. We can empty our pit in half the time we used to spend with a vacuum pump spreader. Also, it drains out to avoid freeze-up during the winter.”
Terry Heeke, Dubois, Ind: ‘Runs forever on a tank of fuel,’' says Terry about his ‘‘best buy” John Deere 950 tractor with a rotary tiller. ‘The tiller works grest working up turkey litter, and our garden. The 950 has plenty of power for a smaller tractor and we've had no problems. Best money we ever spent.”
DeWitt Van Noy, Canadaigua, N.Y: He likes his 346 Deere wire baler. ‘I'm able to go along in fourth gear with no hesitation at all and still end up with a firm, consistent size bale. A great asset to quick and easy baling.” He's displeased, though, with Deere’s 1209 hay conditioner, “I'm disappointed in the way the conditioner was built. Hay builds up on the stub guards and, consequently, they plug and break off. The rolls don't mesh together evenly when conditioning, with approximately a ¥ in. difference where the rolls touch and don’t touch, As much trouble as we've had with it, have no com= plaints on the service and time Deere mechanics gave us in trying lo correct, the problems of this poorly designed product,”
Charles Haas, Custar, Ohio: ‘‘Except for certain needed improvements, this is a good machine,” says Charles. about his 1440 International! rotary combine. ‘It needs separate concaves for wheat and corn and soybeans, and a straw chopper, which is not now available. Also, the grain feeds heavy on the right side of the cleaning shoe so there should be four ‘blank-out plates on the first concave. ‘Has a good header that cuts beans close to the ground. The outside points stay clean in all kinds of conditions. Wish the 145-bu. grain tank was bigger for our 6-row corn head, and have found it takes more power to run a rotary than a conventional combine,” Charles is pleased with his ‘best buy’ Deere 4440 tractor. “‘No breakdowns except an alternator wire that broke twice in two years. Has a cloth seat that floats for and aft and up and down with the bumps, Excellent."
Verdell Olson, Fertile, Minn: ‘My problems started when they drove it in the yard," says Verdell, whose “worst buy’’ nomination goes to his 7720 Deere combine, ‘There was anti-freeze running in the cab and diesel fuel spraying around the engine. After two or three rounds, the straw walker monitor quit and didn’t work for the rest of grain harvest, and the hour meter didn’t work until sometime in corn and sunflower harvest. The air conditioning fan had to be started with a stick or some other tool. A power steering line was assembled next to a belt and later made a real mess on that side of the machine, On top of this, a 6601 didn’t lose much ground to it — they probably should have added 100 in., rather than 20, to the walkers. “I did like the reversing feeder house, the hydrostatic drive and the swing-out auger. John Deere said they'd fix the other problems but that doesn't get the crop off, or pay the custom operator had to hire,” On the plus side, Verdell notes linate that, “Everyone wants to test-drive my best-buy Deere 8440. I'm a little disappointed that the horses seem to be on the order of Shetlands, but I haven't compared another tractor to it on the same implement. Also, the reverse is too fast for backing up to machinery.”
Myron Schulz, Jr., Burlington, Iowa: “I've read “best buy’ reports for Nachur’s fertilizer in earlier issues of FARM SHOW, They must have been written by Nachur's salesman because used, sold and tested Nachur's fertilizer for five years and not one time during thosé five years did it ever do as well as regular fertilizer,” says Myron. “I stopped selling and using it.” Myron's also disappointed with “two L.B. White heaters in my new pig nursery. Two motors burned out and the pilot lights kept going out. filed with the company for repayment. After 12 months and numerous calls, still no results.” Myron adds that his ‘‘best buy” is his 6-row Deere 7000 Max-Emerge planter.
Jim Diebert, Colby, Kan: “They do everything was told they would do. After one year and seven radios, haven't even replaced a fuse,”’ reports Jim about his Motorola ‘‘business band" Maxar radios. ‘‘I also like my Deere 7720 combine. Quiet cab, reversible feederhouse, and very little problems with grain loss. Also like the hydraulic-actuated variable speed cylinder.”’
Frank Schluttner, Verndale, Minn: He's pleased with his John Deere 336 baler and ejector. ‘Works perfect and is fast. Better than the 24T I had before, in part because the tractor governor does not surge. as it did with the 24T. Plunger speed is balanced and faster."’
Delmar Mumma, Alamota, Kan: His “best buy” nomination goes to his 4440 Deere tractor. ‘Easy to shift gears. Best cab and seat of any tractor ever owned. Hydraulics works great. Plenty of lugging power.” On the negative side, Delmar’s upset with his Chevrolet -ton, 4wheel drive pickup. "The fuel system was not right from the start as it was hard to start and gas mileage was poor, put on a new carburetor, which didn't do any good. Had it in the shop at least once a week for the first six months,”
John Voight, South Haven, Kan: “We finally had to park one combine to have enough parts to keep the other running,” relates John about problems with two Deere 7720 combines. “The parts situation was bad, and the downtime so costly it's ridiculous. Deere has sacrificed quality for beauty. “Another worst buy was our 54 by 90 ft. Morton machine shed, built in 1975.’ John adds. ‘'The white sidewalls are two different colors of white, part of the nails were left out and the roof has always leaked. The only time they come out is when it's too cold to be ona tin roof. They drive a few nails in and the next time it rains, it leaks where they walked on it. wouldn't think of storing a truckload of grain in it without covering it with a tarpaulin.” On the “best buy” side, John notes that, “I switched to a Versatile tractor so could get my farming done without constant breakdowns. Nothing but good to report.”
Elmer H. Freidel, Emmetsburg, Iowa: “My ‘best buy’ this year was a New Idea 244 manure spreader with hydraulic endgate,” says Elmer. ‘‘The endgate does an excellent job of holding a completely full load of sloppy manure. The spreader also does a fine job of shredding and spreading frozen chunks evenly.” Daryl Brubaker, Olar S.C.: Daryl! has mixed feelings about his “worst buy” Surge V.S.O, milker detacher. “We like the job the VSO does — it removes the milker on time and doesn't over-milk or malfunction in any way. The problem is that it's made out of plastic that’s not heavy enough to take any knocks at all. We replace a bottom about every two to three months on our six units just from ordinary use.” Heading his “best buy" list is a Love flexible floating cutterbar attachment for his Deere 4400 combine. “Really gets down under my beans and floats better than I expected. Maintenance was real low on the 250 acres of beans we cut this year. Well worth the money invested.”
Peter A. Walhof, Edgerton, Minn: He’s pleased with his 4240 John Deere tractor. ‘‘Excellent performance from the machine and good dealer service. “Another good John Deere buy was our 7000 Max-Emerge planter. Even depth of planting and spacing. A good investment.”
Daniel H. Bender, Harrisonburg, Va: ‘Most of their ‘name brand’ products can be bought from local sources for less dollars,"’ says Daniel who's disappointed with Farmers Purchasing Group, Topeka, Kan. He's also disappointed with his “Flo-mor bottom grain unloader. It's a good idea but the manufacturing was lousy. Had to re-drill holes, weld collars that didn’t line up, and the chain brackets were incorrectly attached. Their distributor in Pennsyl“They had the operator in mind when they built this machine.” vania could have cared less. But it does work.” Heading his “best buy" list is his Vermeer model F baler. “Makes a beautiful, tight, weather resistant bale. Well-built and has required little maintenance through the first 2,000 bales.” He's also happy with his John Deere 6600 combine. ‘They had the operator in mind when they built this machine. Convenient to service, and easy to adjust. Overall, it's mechanically well-built and smooth running.”
Francis J. Kukowski, Georgetown, Minn: “I bought a new 1370 Case tractor in Sept. 1974 and had more trouble with it in two years than with all other tractors put together in 10 years. In 1977, it was broken down a total of 10 weeks during the summer. Finally traded it off for a 4440 John Deere,” reports Francis. His ‘‘best buys" include his Deere 4440 tractor, and his Dahlman 39-ft. cultivator with liquid chemical attachment.
John Ball, Hutchinson, Minn: ‘My worst buy was a Wobble Drive from Year-A-Round Cab Corp. The principle was fine — it replaced the pitman drive on a Love bar, which kept the sickle in register as the bar flexed, and did not shake the platform. The problem was that the belt and pulleys were the right size for a 7-ft. mower, but nowhere big enough to drive a 20-ft. combine sickle. The belts often slipped, stopping the sickle, when cutting bean rows lengthwise, and it always stopped when cutting rows crosswise. That was with the belt as light as possible, and ground speed at ¥; mph." On the other hand, John’s happy with his Deere 7700 Combine, and his Deere 220 flexible platform. ‘With automatic header control and float springs, it cuts soybeans off below the pods but slides over rocks and follows uneven ground. The few rocks that are picked up seldom get into the machine. Cuts everything within reason, including short beans, fine grass, weeds, and even small trees. You can combine in any direction through any material without wrapping the ends of the reel because of the row dividers ahead of the reel. Works nearly perfect in most conditions.”
Norman Heitstuman, Uniontown, Wash: “I have very little Deere equipment because of the high initial cost, plus the high cost of maintenance after the sale,"" Norman told FARM SHOW. “Deere and International are constantly figuring ways to build more of their own parts so they havea. captive customer and can charge most any price they want for parts. “T have a Gleaner MH combine and am really happy with it. A good performer that's easy to work on and cheap to maintain since can buy many parts at my local NAPA parts store, or bearing and power transmission store. “T have been reading with interest the FARM SHOW stories and letters concerning Ray Stueckle’s combine modifications,’ Norman continued. “I've known Ray personally for years and support him 100%, After all, many of his ideas boil down to putting combines in order the way design engineers intended them to be built. The problem starts when production engineers and accountants have other ideas to cut costs. “I know fora fact this goes on since had a Massey-Ferguson 655 windrower that caused lots of trouble. In talking with the factory engineers, and after two years of recalls, I finally traded it for a Hesston 6400, the “Rolls Royce” in haying. It's built like a fine watch, and burns about half as much fuel as the MF 655 did even though both have the Chrysler 255 6-cyl. engine. Many shortline companies have machines and service as good as the big ones, like Deere and IH."
Richard L. Brown, Appleton, Minn: ‘Walt Disney is not dead. He isaliveand made the scrapers for this disk,” states Richard, upset with his 25-ft, John Deere 230 wing fold, 25 ft.” power flex disk, ‘‘Most of the right hand scrapers have broken off once or twice, and one of the left hand. The dealer says must be doing something wrong butI talked to two of my neighbors that have the same problem." On the plus side, Richard nominates his Deere 7100 Max-Emerge 12-row planter as his “best buy”. “I planted 1,200 acres with it last year and the seed placement and stand was perfect. We used it for sunflowers, too, planting large seed. The finger pickup was perfect."
Dennis Schroeder, Woonsocket, S. Dak.: ‘Lets me make more efficient use of my tractor horsepower,’ says Dennis, happy with his Deere 2800 hydraulically adjustable plow. ‘I can pull six 16’s in heavy gumbo and switch to six 20's in lighter stubble ground. Does an excellent job of finishing dead furrows, and along fences where you can adjust it on the go. Am also pleased with the Deere 4440, which bought at the same time. They make a good pair."
Gordon Stumvoll, Coleharbor, N. Dak.: ‘Handles well and haven't had mechanical problems, but it's a gutless wonder,” says Gordon about his ‘worst buy’ F-600 Ford truck. “The engine just doesn’t have any power. Complaining to my dealer and writing letters to the factory brought no results.” “On the other hand, I’ve got nothing but good things to say about my Deere 4630 tractor. In over 3,000 hrs., I've had only minor problems and especially like the clean, quiet cab. Dealer service has been good."
James Hertel, Van Wert, Ohio: He's pleased with his Deere 4440 tractor. “Considerably more power than our 4430 and features big improvements in hydraulics and cold weather starting. Also appreciate the cab comforts, especially the new hydracushioned seat, a big plus over a conventional seat for smoothing out bumps.”
Larry Ruffner, Vermontville, Mich: ‘One of my ‘‘best buys” ever was my subscription to FARM SHOW because it's informative, inventive and a good wholesome magazine for the times,” says Larry. “I enjoy every feature in it and it's put together like no other publication I've ever read. “My other ‘best buy” is a John Deere 6620 bought a year ago. I think this combine outperforms any rotary machine in its class, all things considered. We had a few problems at first, but they were worked out. The seat, body and closed-center unloading auger are just some of the features we especially appreciate.” On the minus side, Larry says he had trouble with John Deere's A18 high pressure washer, ‘‘There are six of them in the neighborhood and all have had water pump problems and all are hard to get primed.”
Robert Pray Sr. & Son, Groton, S. Dak.: ‘This book really took the bugs out of our John Deere 95 combine,” says Robert, who nominates Ray Stueckle's book “Combine Settings for Better Harvesting", which he read about in FARM SHOW, as his “best buy”, Another good buy was his Wilrich 24-ft. field cultivator. “Built tough as you can imagine. Doesn't use slave cylinders on the wings — it has allmechanical linkage — so it stays on the ground, working perfectly level," explains Robert, who also adds FARM SHOW to his ‘‘best buy” list. He had trouble, though, with his Kovar 24-ft. hydraulic harrow. ‘We had to rebuild the cart as the wing sections kept breaking. Replaced all chain linkage to sections the first 100 acres. We have no rocks, but the teeth broke just from hard, dry clumps — must have replaced 20 to 30 teeth. No solution yet to this problem.”
Cary Brown, New Madison, Ohio: “Has poor fuel economy, very. poor hydraulics, you can't see out of the “Best 4-wheel drive tractor on the market.” cab and the company was rude and unconcerned. Worst buy ever made,"’ says Cary about his 8630 Deere tractor. On the plus side, Cary calls his International 4586 4-wheel drive tractor The very best 4-wheel drive on the market today. Excellent is the only way to describe it. Power is unlimited and it runs trouble-free. The cab is 10 years ahead of its time.”
Bill Rennick, Milestone, Sask: ‘‘If one man can make that much improvement to all makes of combines, why can't the so-called engineers in the factories come up with ideas to make combines more efficient?" asks Bill, who modified both his Massey Ferguson 510 and John Deere 105 combines along lines recommended by Ray Stueckle, author of “Combine Settings for Better Harvesting.” “If those farmers who don't believe it works would change just one combine over to the Stueckle method, they'd never go back again. The money spent modifying is a small fraction of what's saved by eliminating dockage at the elevator.’ Also on Bill's “best buy" list are RW Precleaners, sold in Canada by Oliver Industrial Supply Ltd., which he mounted on all his tractors and combines, and a swather. ‘The main problem with all our farm engines is dust or snow, but this has solved our problems, Makes air filters last up to six times longer,” says Bill. “It forces most of the dirt or snow that would normally enter the air cleaner out of the intake air with a jet mounted on top of the exhaust or muffler. Works great.”
James Kaiser, Little Falls, Minn: His “best buy” is an Eberhardt Silopress silage system. “Well-built and the silage comes out of the bags as good, if not better, than feed out of a sealed structure. The Silopress system takes a little more work and management but the savings and versatility more than make up for it.”’ Lyle DeVries, Shannon, Ul.: At the top of his “best buy” list are his John Deere 4440 tractor, and his Mathews Co. 9E Rotary Scythe. “After one year and 500 hours of use, the only repair needed on the 4440 was a 28 cent gasket to stop a small fuel leak. Cab is quiet and che seat is very comfortable.” “The Rotary Scythe works great in hay and has few moving parts. Had no breakdowns last year except for a weld that came loose on the lift mechanism. Our warranty covered that.” Lyle’s upset, however, with his White 8600 combine. We bought the combine after the harvest season in 1976 so we have used it three years now and have had numerous breakdowns each year. Last year, we ran about 1,000 acres of corn and soybeans through the machine and had only 2 or 3 days that we didn't havea breakdown. Our total repair bill was about $2800 last season, with no single repair over $250." CAN USE cted like ating id ison all ditor Norm yrst B
Melvin Frueh, Donnellson, Iowa: “It was alemon from the first hour on, with bolts falling out, the electrical system shorting out, power steering locking up and the transmission oil filter plugging every five hours," says Melvin about his ‘‘worst buy” 2390 Case tractor. “When they tore it down after 60 hours, they found that some wear washers in the rear end had been left out at the factory. The dealer was helpful in getting things right, but the tractor traded in — a 1370 — was nearly the same way. In 800 hours, it was down at least six times.”’ On the plus side, Melvin salutes his International 820 grain platform. “You can get nearer to the ground to get those low-standing soybean pods and make the field look as if you cut it with a lawn mower. Also, the cutting knife is faster so you can drive up to 4.5 mph and not strip the stems off. I've even been in a field with a John Deere row crop head and done just as good a job, yet can still use my head for small grain and drilled soybeans, which you can't with the Deere model." linate W. E. Cox, Temple, OkL: “The worst buy I ever made was a Krause chisel plow. The hitch was so weak had to have a welder weld it before had plowed 100 acres. That cost $50. Also broke two rock shaft clamps which cost $20 each. The bolts were too weak. The dealer wouldn't do anything unless the blockman approved, The blockman wouldn't approve so called the president of the company, who said he would see what he could do. I guess he couldn't do anything, at least he didn't. traded the thing off and got a John Deere.” On the plus side, Cox says “my best buys were two 6030 John Deere tractors."
Jerry Utzinger, Grove City, Ohio: “Wouldn't trade it for a Cadillac,” says Jerry about his Chevrolet 4wheel drive Super Cheyenne pickup. “We use it for pulling 500 bu. wagons full of grain, and as a fuel truck with 150 gal. vacuum pump, plus it's equipped with tools from A to Z to repair machinery.” His “worst buy" nomination is his John Deere 4430 tractor with hydraulic front drive and automatic transmission. The front wheel unit is a piece of junk. Okay when it's working, but it rarely works. It either breaks oil lines when working and dumps 10 gal. of oil on the ground, or, when you really need it, you push the button to turn it on and it doesn’t work, Deere knows of this since bought it new in 1974 but they hav en't fixed it. Also, the automatic transmission jerks too much when shifting to 7th gear."
Charles Condra, Harrisburg, Ark: “You can go 3 mph and yet it throws over very little grain, compared to the older Deere combine traded off,"' Charles says about his “best buy” Deere 7720 4-wheel drive combine. “And, if get hung up ona high dike or other obstacle, I just push the button for the hydraulic all-wheel drive and it pulls you right out.”
J. Herbert Brubaker, Mount Joy, Penn: Heading his ‘best buy” list is his Conservation Max-Emerge 6-row planter, model 7000, from Deere, “Pleased with the operation and structure of the planter. No problems except a broken adjustment arm due to rock damage — not Deere’s fault. Very accurate with spacing and depth. can plant conventional or no-till, “We're also pleased with our 4240 John Deere tractor, Only problem has been a fuse on the air conditioner which the serviceman took care of.”
Marvin Mechtel, Page, N. Dak: Marvin's disappointed with his “worst buy" 8820 Deere combine. “Monitor systems were.not right, One brake keeps tightening up and has burned up the linings three times. Self-tightening cylinder belt keeps slipping. Sunflowers wrap on the feeder-house chain. Clean grain sieve was welded wrong at factory and needed replacement. Our new 7720 Deere combine runs circles around it in the field and saves more grain. Dealer has been great but he’s stumped on this machine.” On the positive side, Marvin is pleased with his 4640 John Deere tractor, “Handles a 16-row mounted planter and cultivator with ease, Have had no problem other than losing anti-freeze because the tank heater was never tightened onto the engine block. Firestone 20.8 by 38 deep-tread radials really give an extra soft ride and provide good traction.” Marvin's wife adds that their 1979 4-wheel Chevrolet Suburban is a best buy. “Fuel economy's not great but it sure is a versatile vehicle. Marv can have the car and leave me the Suburban."
Dick Heatherman, Almira, Wash: “It's as close to indestructible as any piece of machinery I've ever seen,” ‘‘As close to indestructable as any piece of machinery I’ve ever seen.” says Dick about his Allis Chalmers 7-shank, 3-pt. V-ripper subsoiler, his nomination for “best buy”. He's also happy with Kelly Tire Co. for promptly taking care of problems with the company’s tires on his John Deere 8630 tractor. “They started to crack at the lugs so the company sent a dealer out to measure wear, They figured 80% left in the tires and sent me new ones at 20% of new price. At last, was treated fairly by a company. “ wish the Deere 8630 was as reli“able,” he adds. “John Deere or I have spent close to $2,000 for every 100 hours the tractor has runand there are only 2400 hours on it. Down time is the joke with John Deere, was down six weeks once waiting for parts and right now haven't seen the tractor for 32 days waiting for parts.” Dick adds that he's also had problems with his ‘‘Adja silver spot marker. The principle is great but it isn't accurate enough. The marker might drop all its paint every 4 ft. for half a mile, and then be empty for the rest of my 5 mile spray supply, leaving me wandering around. Its pattern of paint spray is erratic and unpredictable.” Dick also has acombine complaint: “I've rented a new Allis Chalmers MH or MHz2 for five years and will verify that they can eat a lot of wheat and do a good job, but each lacked quality control at the factory, and dealer prep, too,” he explains. “I've lost bearings, the air conditioner quit after one half hour, belts weren't lined up and other small things were wrong, requiring a 160 mile round trip to get parts." Glenn R. Damman, Melbourne, Towa: “I'll match it against any competitive brand of the same horsepower. Just can’t say enough about this tractor,”” says Glenn about his “best buy’’ White 2-70 tractor. ‘I bought it in November of 1978 and have put on 500 hrs. without a bit of trouble or expense. Plenty of power and economical on fuel. “I'm also pleased with my New Idea manure spreader,” he adds, “Nothing cheap about it and well-constructed, Use it every day without a bit of trouble.”
John Simons, Marienthal, Kan: He's pleased with his ‘‘best buy” FK-240 Sun-Master Flail King shredder. ““We used the machine on about 800 acres of irrigated corn and wheat stubble. No problems and easy to service,” reports John, “‘It replaced a Brady of the same size which was nothing but a headache from day one.” He says he’s also happy with his CrustBuster 3-pt. mounted disc drill. “Works good on bedded irrigation ground but could be built heavier in places." John is disappointed, however, with his 4840 Deere tractor. ‘‘Something constantly wrong with it,”’ he says. ‘A seal has gone out on the steering pump twice in the year we've had it, requiring it to be hauled to the dealer. Also had trouble with one wiring harness, replaced the radio, fixed a leaking fuel tank and had some factory recall work. I’m also displeased with the traction it has and wish I would have purchased a 4-wheel drive. However, I'd list this tractor number one in operator comfort. Dealer service has been good and the warranty covered everything other than work done ourselves, But down time is costly.”
Clare Kerr, Bruce, S. Dak: He's disappointed with his new TR-70 New Holland combine. ‘‘Had altogether too much trouble with it fora new machine. Had a lot of chain problems, hydraulic trouble and some bearing problems. Basically, the combine worked alright but we had 12 service calls in one month of corn harvesting.” On the positive side, he’s pleased with his John Deere 8-row planter with a Wetherell transport. “Bought the 7000 planter last spring and liked the job it did. Planted some for a neighbor and he said he never had a stand of corn like it: At first we used a flat trailer to move it. but later got a Wetherell transport. It works fine.”
Burnell Beilke, Buffalo, N. Dak: “We try to buy name brand products that are proven good," says Burnell, who is well pleased with his 1979 4640, quad range John Deere tractor. “We chop 200 acres of alfalfa three times a year and found this a very good pto tractor. You set your speed and it stays there. Cab is quiet. Just no problems after 300 hours."’ Another ‘best buy” for Burnell was his Hesston 5800 round baler. “Makes excellent, easy-to-start bales. Can bale straw at 8 mph. A few bearings went out on roller ends but they're easy to replace in about 15 min,"
Marion M. Taylor, Spotsylvania, Va: “I've owned five Ford tractors since 1970 — a 3000, a 4000, two 5000's and an 8600. I still have one 5000 and the 8600, Ford has given me rotten service and I’m switching to John Deere mainly because of service that I can count on when needed during the busy season. I farm 1,100 acres of corn, wheat, soybeans and hay, so when the sun shines, we have to roll. And that means service on equipment when you need it.” Marion’s also disappointed with his Ford 230 1612-ft. disc harrow with fold-up wings. ‘I put five bearings in last spring and lost another during fall planting. Also, it sways and bobs up and down on the road like a seesaw. Ford Motor Co. has given me poor service.” Heading his ‘‘best buy” list is his Deere 2840 tractor. ‘I’ve used this tractor on just about every job on the farm, from cultivating beans to chopping silage. Has plenty of power and handles like a dream. Runs quiet and I don't have aringing in my head after operating it 10 to 12 hrs. a day like another brand I have. Dealer gives top service.”
Michael De Sutter, Marshall, Minn: He's happy with his ‘best buy" New Holland 273 square baler. “I'd never buy a tractor that’s a different color than what the dealer sells.”’ “Have only used it one year but have had no trouble at all. Runs as smooth and quiet as a sewing machine,”’ On the negative side, Michael notes that, “I'd never buy a tractor ina dealer's lot that is a different color than what the dealer is selling.”’ He's disappointed with a used John Deere he bought from an International dealer. “I have a hard time starting it. The battery is always down. Two different mechanics worked on it, but I still need a battery charger to start it. like John Deere but have a lemon here.”’
Randy Lovington, Hurst and Lovington, Meigs, Ga: He puts FARM SHOW and Ray Stueckle’s “Combine Settings For Better Harvesting” book at the top of his ‘‘best buy" list. ‘FARM SHOW" is interesting as well as informative, and Stueckle's book has been a great help in solving some problems we ran into combining corn and soybeans. Both FARM SHOW and Stueckle's book were gifts from a friend and valuable ones.” Randy's disappointed, though, with the 13-ft. floating cutterbar header on his Gleaner F2 combine. “It's not so much that it's a bad piece of equipment, but that its performance is overshadowed by the 454 row crop header from John Deere. Header loss from reel shatter, and shelled beans spilling out from under the header auger and then over the front of the cutter at the center of the header, are the two major problems." Randy adds that he’s pleased with the Gleaner F2 itself. ''The machine was very reliable this past harvest season, with only three very minor ‘bugs’ to work out.” CAN USE cted like ating id hhnson Af ies. = ak Nom rst B
LeRoy Mayfield, Bovina, Tex.: “This tractor has been in the shop almost constantly,”’ says LeRoy about his 1977 IH 1086 tractor. “It’s a sorry tractor from front to rear. Front end wheels are weak, gears lock, it's hard to shift, clutch is hard to press and won't stop without grinding gears, hydraulic and power lift cause trouble, cab doors are weak, and the air conditioning fans are poor. “The tractor has not been abused in any way," he points out. “I have a 1973 Deere that’s been in the shop only once and a 1975 Deere that's been in only twice, and they've been driven and maintained by the same operators. Our 1975 1566 IH has been about the same as the 1086 for trouble. There won't be any more IH tractors on my farms." On the positive side, LeRoy says his John Deere 7100 Max-Emerge planter “is the best planter made. Linate plant corn, soybeans, cotton and milo and am pleased with this planter on all my crops, Especially like the seed depth adjustment, the speed of changing seed drop, and the way it handles herbicides." SAGES BIRR SE» SSweeem Vv Stes SeeYy Ve ssepevev drive train, has never been repaired. “My worst buy ever was a used 1600 Oliver tractor bought in 1968 with less than 500 hours on it,’’ reports LeRoy. ‘The tractor now has about 3500 hours on it and there’s not a single component that hasn't been replaced or repaired, including the engine, two clutches, both transmissions, hydraulic system and final drive.”
Marvin V. Yelk, DeForest, Wis: “This planter is as good or better than the dealer said it would be,” reports Marvin, about his Deere 7000 6-row planter. “I planted 500 acres with no problems, except that one bearing on the fertilizer opener wore out and the dealer replaced it.”
Howard Kropf, Buffalo, Mo: Howard's pleased with his Lilliston 4-row rolling cultivator. “It really cleans up our crops — we seldom even use a sweep cultivator anymore," he says. “We're also happy with our John Deere C-380 3-pt pto fertilizer spreader. Does the most even spreading job of any fertilizer applicator we've ever used.”
D.J. Moore, Council Grove, Kan: “Our Hesston Hydroswing swather easily handles heavy alfalfa, oats. or sudangrass without problems,"’ he reports. “Ease of handling and maneuvering is comparable to much more expensive, self-propelled swathers.” He also likes his IH Cyclo planter, except for the transport wheels: "You have to lift the two row gangs to install the back transport wheel. If the engineers had to lift those row gangs themselves just once, they'd build them different.” Moore nominates his 3020 John Deere tractor with power shift transmission as his ‘‘worst buy." “The tractor was purchased new and started using oil after two or three hundred hours. Deere replaced the rings on warranty, but two or three hundred hours later it was still using oil. “Deere repaired it again on warranty but didn’t do the job right. Finally, when the tractor started using oil the third time, the dealer said it should be overhauled, replacing rings, pistons, sleeves, and so on, Of course, we paid the bill this time. “Years go by and the transmission needed work. The tractor was taken to the same dealer and he worked on it. The transmission still wasn'tright, so we took the tractor back again. It was taken apart and they waited a couple weeks to let the Deere field man tell them what to do. “Now, two years later, the power shift transmission failed again. After the experience at Deere, the tractor was taken to another mechanic. When he tore the tractor down, he found the wrong parts had been put in the transmission — would you believe they put a 4320 part in a 3020? “After a good mechanic put the tractor together, it operated fine and is still running well. “I've paid for on-the-job transmission training for Deere servicemen and dealers. I've also paid for parts to go along with these fiascos, not to mention time and money lost in down time. talked to the John Deere district man and got the run around. The original dealer has since retired and the new dealer said it wasn’t his problem.”
Virgil Champman, Conesville, Iowa: He’s pleased with his Deere 4840 tractor and 7000 Max-Emerge 8-row planter. ‘The 4840 has the power and all-around performance we were looking for in a tractor this size with the ease or handling of much smaller tractors,” says Virgil, “Quality control was also very good. No problems to report so far. “The 7000 planter has performed as advertised and all rows plant the same depth even in the softest ground. No problems but would like to see Deere come out with a folding system for a planter this size.”
James E. Baltzly, Beach City, Ohio: He nominates his 1978 John Deere Turbo 7700 combine as “best buy”. “Did a good job in our small grain as well as in corn. As you always do with a new machine, we had a few minor problems that the dealer fixed right away. The Deere 643 corn head is one heck of a good head. Didn't use a wrench on it in 1,000 acres.” Robert Worrell, Winchester, IL; “Easy to load and has two compartments for hogs,"' reports Robert about his 24 by 7-ft. gooseneck trailer from JW Manufacturing. ‘We can haul 46 head of 230 Ib. hogs with ease. “Another good buy is our FS Star Craft farrowing house and nursery. Bought it last fall and it worked well through the cold winter and spring.” On the negative side, Robert notes that Pannier hog feeders haven't worked out for him, “Every time we get a blowing rain, feed gets wet where the hogs eat,’’ he points out. “Even with sun and rain shades, it rains in and it's tough to clean out and get feed started again. Also, the sun and rain guards are too low. Hogs tear them off when they get to 200 Ibs, because the guards hit their backs. Same is true of sow and creep feeders.”’ Ralph Hauter, Morton, IL; “One final drive cracked in shipping and the pickup reel broke while combining,” says Ralph of his White 8600 combine. “Otherwise, I like the way the header control works on this bean platform and also the quick-cut sickle. It lets you drive faster and does not shatter beans.” His “best buy” nomination is his Deere 7000 planter: “It's the first planter that puts the seed where want it,”’ he says. “‘Also like our GMC K-15 pickup. Have had no problems. It sure was handy in the ice and snow this last winter.”
Gerald Thomsen, Ryan, Iowa: He's been happy with a used 1974 model 400 Deere combine he bought in 1977. ‘In two years it has needed only belts and a minor bearing while picking 400 acres a year,”’ he reports “Keeps one man busy hauling in from the field.” Gerald adds that he bought a new John Deere Max-Emerge planter because I've seen nothing but good about them in FARM SHOW magazine,” On the negative side, he's disappointed with a Hanson 8'%-ft. double auger snow blower he bought in 1977. “The machine is rated for 145 hpand used only 85 in 1977-79, The machine really blew snow but has a weak hitch. In 1978-79 used 135 hp and reinforced the hitch, Could hardly run the engine before it would shear pins. I'd give it a 100 hp maximum rating.”
Garret Geisler, Callender, Iowa: Garret had trouble with Pioneer 3591 seed corn, “I planted 3591 with half my planter and another hybrid in the “This 18-acre ‘test’ cost me 35 bu. per acre.” other half,’ he says. “The 3591 had emergence of about 60% compared to 95% for the other hybrid. Pioneer admitted at winter meetings that 3591 had problems in 1978. Their excuse was that they bought the seed from another division, This 18 acre ‘test’ cost me about 35 bu. per acre But Pioneer's attitude bothered me more.” On the plus side, Garret’s happy with his Deere Max-lmerge planter which ‘‘makes the most of any moisture you have when planting in dry seedbed conditions. Depth control is excellent compared to International's “posi depth" control on the Cyclo planter, which this planter replaced, I was happy to sacrifice the large 1H seed hoppers for John Deere’s depth control. Also, resale value of the 500 series is pathetic.”
Steve Barta, Perkins, Okla: ‘‘Although many dairymen in my area have used it, had bad luck," says Steve about Rabon R.O.L, oral insec ticide. “I put R.O.L. in the feed according to directions. Milk production fell from 50 Ibs. to 45 Ibs. per cow per day. The cows just wouldn't eat feed containing the additive. After cleaning the feed out and starting over without it, production resumed,” On the plus side, Steve notes that his John Deere 2280 self-propelled windrower has performed up to expectations. “‘] bought the swather in April 1978 and, even though it costs much less, the 2280 weighs more, has a better cab and a lower profile than other machines looked at. Never plugs up, even at quick speed in heavy hay. Also like the heavier section knives and the many speed adjustments on the reel and auger.”
Richard J. Scott, Kimball, Neb: He's pleased with his John Deere 410 round baler. “I bought it in September, 1978, to bale about 80 acres of sorghum for cow feed. Simple to operate and does a great job baling up green forage.”
Dee Keeton, Kingston, Okla: “What more could I ask?" says Dee about his “best buy” John Deere 4440 tractor. “Tremendous lugging power and doesn’t use oil. Good service on every little minor thing that has gone wrong.” Ag-Team’s all-cut disk also rates as one of Dee's best buys. “It's the most massive, heaviest, best built disk I've ever owned. Does an excellent job of cutting up surface trash and leveling in soft broken ground. However, it takes at least a 4440 to handle it. “This unit has given good service with a minimum of repair,” says Dee about his “best buy’ New Holland big round baler, “Other round balers use belts which break but we've had no trouble with chain breakage. Our sandy soil is hard on chains but with proper maintenance, they give good service.” Other “best buys” on Dee's list are his Dodge 3/4-ton power wagon pickups and his 1979 Volkswagen Rabbit hatchback. *‘We have two Dodge trucks and they're the best, toughest 4-wheel drive vehicles I've ever owned, Unlike some others, they haven't nickled and dimed me to death. They don't use oil, have plenty of power and carry a big load. “We bought the Rabbit when we sold the family car because of high gas prices. After testing major brands of economy cars, we settled on the Rabbit because it had the most room. Gets over 30 mpg any way you drive it, doesn’t use oil, is easy to drive and 10 OFARM SHOW 3-© or two adults and three big kids. Our gas bill went from $100 a month to $25. We wanted a Rabbit diesel, but the waiting list was too long.” On the negative side, Dee notes that “my worst recent purchase was a “Best 4-wheel drives — they haven't nickled and dimed me to death.” Vicon power harrow. This tool has been nothing but trouble,”
Steve Valeriano, Bernville, Penn: Heading his ‘‘best buy” list is Aatrex “Nine-O” herbicide in pelleted form. “Disolves as soon as it Contacts water and doesn't settle out when it sits. Costs just a little more than powder and less than liquids.” Steve's also been pleased with his 4230 Deere tractor, and his New Holland 273 baler and thrower. ‘I've owned several brands of tractors but none as convenient and comfortable to work with as the 4230. And the baler is a real workhorse, and trouble free,"
David E. Siebels, Scotch Grove, Iowa: ‘Has given me no trouble after two summers of use,"’ says David about his John Deere 210 lawn and garden tractor. “The 38-in. mower does an even job of moving over rough terrain. Has lived up to everything I was told. “Also, my Bush-Hog barge box and 10-ton gear has been a good buy. Stands up to the loads we put on with no trouble. Very pleased.”
Clair Moore, Dolliver, Iowa: ‘I bought a diesel pickup to get better mileage," says Clair about his ‘worst buy" 1978 Chevrolet diesel 1/2-ton pickup. “I traded in a 1976 6cylinder, 1/2-ton that was giving about 13 mpg. The best mileage I've gotten on the diesel is 17 and the lowest 9, with the average around 12 mpg. Now the speedometer is broken and one rear wheel is leaking grease.” On the plus side, he's happy with his Deere 7100 Max-Emerge 8-row planter, “Could hardly believe this machine planted at such an even depth, Planted the same depth in loose peat soil as in more compact soil.”
Norman Wattleworth, Greenup, Ill.: Heading his list of “best buys” is his Deere 4430 tractor. ‘Like the quietness of the cab," he says. ‘We've had very little trouble in the 800 hours we've used it. Good dealer service, “Also like the Lincoln 250 AC or DC are welder,” he adds. ‘Especially like the ease of striking an are without having the rods sticking.” Norman says he doesn't have any “worst buys" but he is disappointed with the mileage he’s getting on his 1978 Oldsmobile diesel. "Gets 23 to 24 mpg on long trips and 20 to 21 on short trips. It was supposed to get 24 to 29 mpg. Outside of this, it gives good service and uses no oil after 15,000 miles.”
Edgar Meister, Chadron, Neb: Edgar's pleased with his 4800 Hesston square baler. “It's pto-driven and makes 4 by 4 by 8-ft. bales that weigh about a ton,” he says. “It had a few bugs but is sure a change in handling hay and will easily make 20 tons per hour, We have the accumulator, which drops two bales in one place, and Hesston’s stacking attachment for our truck bed. We also have their feeder wagon.” Also on Edgar's “‘best buy" list is an apronless Orbilt manure spreader which he read about in FARM SHOW. “Our man who uses it compares our John Deere spreader to a Volkswagen, and this new Orbilt toa Cadillac. It uses a hydraulic endgate to push the load to the beater, with no apron. It's made in Goodhue, Minn., by O'Reilly Mfg.”
Ed Mitch, Cut Bank, Mont: Ed's a farm equipment dealer and feels it would be unfair to comment, good or bad, on machinery but says, ‘‘l sure like FARM SHOW’'s ‘Best and Worst Buys’ report, hope some of the man“We get tired of manufacturers that take a ‘don’t care’ attitude.” ufacturers pay attention to the complaints. As dealers, we get tired of manufacturers that take a “don't care” attitude and won't answer letters or return phone calls.” Bobby McCampbell, Knoxville, Tenn,: Heading his “best buy” list is his 350 Ford pickup bought in the spring of 1978. “With an automatic transmission and 460 cu. in. engine, it pulls a gooseneck trailer with ease. Has nearly 40,000 miles on it and still drives better than a car, even though most of the mileage was made pulling trailers. Very little spent for upkeep.” Ron LaDuke, Oneida, Ill,; “I really enjoyed combining beans and actually had fun running the machine! It may even encourage me to plant more beans next year,"’ says Ron about his “best buy" Deere 4-row 454 bean header. “Didn't have one problem in 300 acres and I know it saved more than enough beans to pay for itself. With no reel to watch, it sure made a difference in driver fatigue, especially at night. Extremely pleased."
Herbert & Brian Espensen, West Branch, Iowa: They nominate their Deere 7700 hydrostatic combine as their best buy. ‘‘Tremendous capac“It ran as if it had an anchor dragging behind it.” ity, easy to handle and comfortable to operate. Have had only $14 in repairs in 145 hours,”’ says Herbert. “We also like Deere’s 4400 series tractors — a pleasure to drive, easy to handle and quiet. We've had two 4430 tractors and now have a 4440. Earlier models needed a little improvement on the hydraulics but think that’s been corrected on the 4440.” Their ‘‘worst buy" nomination is a Chevrolet K-10 4x4 pickup. .“'It wouldn't idle for the first 30,000 miles and ran as if it had an anchor dragging behind it. The mechanic couldn’t seem to remedy it so finally we found the problem ourselves. “At 50,000 miles we discovered that the emergency brake has been partially on since coming from the factory. We replaced the transmission at 40,000 miles. The fenders are all rusted out, the vinyl on the seat is cracked and apart at the seams. Just seems to be a poor piece of equipment," says Herbert.
Walter Brown, Foreman, Ark: He's disappointed with a 12 row cultivator which, he says, “I bought over the phone from Dickey Machine Works. told the man I had heavy black soil and he assured me the machine could do the job. Once in the field, the bearings went out on the gauge wheels and bolts holding the shovels started breaking. We lost 20 shovels in two days. Everything started to bend. It was just too weak. “Two company men came out. They worked on it all day. The next day we went to the field with it and the same things happened all over again. Then, driving down the road, the right wing fell off. Next day, the other one fell off. My son and I spent two days welding it back together.” Walter adds that his “‘best buy" is his 7100 Deere planter, “We used it on 2,500 acres and had very few problems.” Vincent Raymond, Watson, OKL.: He's pleased with his "best buy"’ New Holland 845 round baler: “Gets the bales started easily and has operated trouble-free. It's a good machine.”
E.R. Robertson, Kentland, Ind: “I've had this baler three years and have less than a $5.00 total repair bill,’’ says Robertson about his John Deere 510 baler. ‘‘I received an operator's manual on delivery. This year, baled 313 big-round bales in one 3-day period with no troubles. Bale startup is good.” Also on Robertson's ‘‘best buy" list is his 4240 Deere tractor. ‘Plenty of music, cool air and a hydraulic seat. It's trouble-free and makes baling a pleasure.”
Victor Laskowski, Yuba, Wis: Victor's excited about his New Holland 489 Haybine. “It's one of the best haymaking machines on the market. Never plugged once and the floating header works great over stones or rough ground.” “Tt was a lemon from the engine back.” Victor adds that ‘‘my worst buying experience was the purchase in 1971 of a John Deere 4320 tractor with hydraulic front-wheel drive. It was a lemon from the engine back. First the drive disintegrated and deposited debris in the transmission and hydraulics. After the oils were drained, it took nine filters before the hydraulics would work again. The front drive fell apart two more times. The clutch and pto have been replaced four times. With only 3069 hours on it, the tractor has been in the shop 26 times for repairs.”
Robert DeBerard, Jerome, Idaho: “This combine performs even better than it's rated for,” says Robert about his John Deere 6600 combine. ‘Because of its performance, we were able to complete our grain harvest just before the rains came last fall. My wife does the combining and enjoys the comfort and convenience of the cab and controls.”’ Robert also is well pleased with his XL 175 Honda motor bike. “It's the best transportation for checking irrigation I've found. It’s cheap to operate, dependable and fast."
William Olson, Dolliver, Iowa: “Just hasn't worked well the past two years in peat ground,” reports William, who's disappointed with the performance of Aatrex on peatground to control weeds in corn. “We applied it at a heavy rate with crop oil when the grass was one inch high, and it set it back about 10 days, then it grew like mad. We cultivated a couple times, but grass in the rows hurt our corn yield.’ William is happy with his 3-pt. John Deere 1100 field cultivator. “It rides on two tires and is 24-ft. wide with fold-up wings. One cylinder raises both wings. Has 4-in. sweeps, three bars and spring teeth. Mixes soil well, and seals and levels nicely, bringing rocks to the top without damaging the machine.”
Lloyd G. Bartelt, Woden, Iowa: “This is a good shop drill, but it’s not - working for me because OSHA removed the button that locks the power switch on,’ reports Lloyd about his Milwaukee 1/2-in, power drill. ‘I want to use the drill in my small drill press, but how do you hold the switch on, pull down the press lever and pump oil on the iron and bit — all at the same time with two hands? understand OSHA had the switch removed because they felt it was a safety hazard,"’ says Lloyd. He’s happy with his John Deere 7000 planter. ‘Does everything they said it would — plants at a good, uniform depth and it's easy to change plant population. wouldn’t want to be without the monitor.”’
Delbert Will, Irwin, Iowa: ‘I’ve had it for a year with never a minute of trouble,"’ says Delbert about his “best buy" John Deere 4440 diesel tractor with Power Shift transmission. ‘Has plenty of power, shift on-the-go, lots of traction, and best of all, a wonderfully quiet cab.”’
Donald H. Humbert, Clyde, N.Y: FARM SHOW heads Donald's list of best buys. “It's truly a farm magazine for all farmers coast to coast. We enjoy every issue, “Another one of our most satisfying purchases is a John Deere 70 skid steer loader. We bought it to clean heifer pens but it has taken over lots of other back-breaking jobs around our farm. Small enough to get into tight corners but powerful enough to do a big job.” Another “best buy" on Donald's list is his electric Ubler silage cart. “Takes many miles out of feeding cows, winter and summer. Being electric, we have no worries about sparks around hay and straw."
Richard Slaybough, Biglerville, Penn: ‘This is the first piece of John Deere equipment I've ever owned,” says Richard, about his Deere 7000 corn planter. “We had a perfect stand and the best depth control, but the main drive ratchet gear twisted to pieces the first 12 acres and we couldn't get parts from our local dealer."' Richard adds that he’s well pleased with his Krause field disc. “It has the best cutting and levelness of any disc. Heavy and ruggedly built.” Richard adds that his Lely Roterra gets his nomination as a “worst buy.” “The salesman never returned once problems started, It’s the most expensive machine we own for repairs and maintenance. The salesman misrepresented it for our area, which has a lot of stony ground.”
Bill Fullerton, Enon Valley, Penn: Bill's two “best buys” are the Fahr Centipede hay tedder and a Deutz 3006 tractor, “I thought the tedder was just an overpriced toy at first but now I wouldn't make hay without it. Not only speeds up the drying process considerably, but even rakes when put onto the optional gearbox. “The Deutz 3006 has amazing power for a supposedly small tractor, and fuel economy is unbelievable. We have an older 7206 Deutz that we're just as pleased with. Both are comfortable, easy to run and exceptional values for the money.” Bill is disappointed, however, with his ‘‘DeLaval Challenger feeder. The unit works fine now but we've had far too much trouble with it, considering the high price tag. No complaints about service, I'm just disappointed with DeLaval and wouldn't purchase one of these units if were doing it again.” Larry W. Koester, Raymondville, Texas: ‘I can still feel human at the end of the day,” reports Larry, who's happy with the comfort and maneuverability of his John Deere 9910 hydrostatic cotton picker. “An excellent machine. Meets all my expectations for speed and efficiency, along with comfort that lets you work long hours. However, service time is “My blood pressure has been high longer than the air in the compressor.” longer than was led to believe and dealer prep was not what one expects with a machine of this price,” On the negative side, he notes that his ‘‘Saylor-Beall air compressor with 3-hp Briggs & Stratton motor’ has caused problems. “The air compressor itself is fine, but the no-load start valve, and pressure kick-out valve, have given trouble from day one. Vibration from the one-belt drive has broken the 3/8 in. inlet pipe off the 20-gal. tank twice. Needless to say, my blood pressure has been high longer than the air in the compressor.” Larry adds that, ‘I'm saving my legs with a DMI Surveyor for measuring land. Thanks to FARM SHOW for telling me about it.”
Robert C. Haag, Orient, Iowa: He’s happy with his Deere 510 big baler. “I've put a lot of hay through this baler and it works like a dream. Especially like the automatic shutoff that shuts off the pickup when you have a full bale, and the hydraulic twine wrap. “My Grain-O-Vator 10-in auger is another best buy," adds Robert. “Has great capacity for augering wet corn and, with the hydraulic lift, is much easier and faster to move from bin to bin.” Robert is disappointed with “Dyanap herbicide by Uniroyal. sprayed Dyanap on my soybeans only to find it sets your beans back more than the weeds. ended up walking the beans because the Dyanap wouldn't work. “I’m also disappointed with my Palco cattle corral. The first time I used it, a calf hit one of the panels and bent it badly. For what it cost, it should be built out of heavier material. It does have a good, heavy loading chute and carrier.” John McDowell, Jr., Shamrock, Texas: He's well pleased with his John Deere 400 Roto-Hoe. “It saved our '78 cotton crop. A hard rain packed the top %-in. of soil three days after planting just as the cotton was trying to break through. We ran the hoe over the seed and had a very good stand. In the turn row, where we missed with the hoe, nothing came up. It’s also a great sand fighter. “I'd have to say that the herbicide Roundup didn’t live up to our expectations,” adds John. “We had about % acre of bindweed and, following directions, obtained only about half a kill. [don't like to say the product was bad because we've had nothing work better, but the company seemed to over-advertise the product as a cureall." Don Paul Heg, Petersburg, Texas: “Cyanamid's integrity is damaged in my eyes,’ says Don who's disappointed with Prowl! herbicide. “It was advertised as needing no incorporation if rain was received after application. I got plenty of rain but I also got weeds. Later, a Cyanamid representative told me that Prowl must be incorporated in our area regardless of rain, He said the commercial saw was made for general distribution and should have been changed for our area. “Although there's been a few problems, I'm generally satisfied with my 915 TH combine,” adds Don. “Does a good, clean efficient job of harvesting my corn and soybean crop.”
Clifford T. Moore, Eldon, Iowa: “'It turns the ground well even when it's somewhat frozen. Trash is no problem,” says Clifford about his “best buy" Deere 2600 semi-mounted adjustable plow. “I'm more than satisfied, My only objection is with the offset arms which the coulters fasten to. The single U-bolt just doesn’t hold the coulter in place with frost in the ground." Clifford adds that he’s had belt problems with his Ariens 10 hp, 38-in. lawn mower. ‘‘I'm not entirely dissatisfied with this mower — it leaves the grass looking good and handles well. However, two $18 drive belts in one season is too many for a $1,000 lawn mower.”
Lauren Lucas, Academy, S. Dak: Lauren's ‘‘best buy’’ nomination is a John Deere 2840 tractor. ‘‘For an 80 hp tractor, it's a real workhorse. In 18 months, I’ve had no trouble with it and it's always ready to go. Really helps.when the dealer lives up to his half of the bargain.”’
Fred Tillinger, Sturgeon, Mo: His “best buys" are John Deere’s 6600 combine and the Deere 7100 fold-up planter. ‘‘We're extremely pleased with performance of both machines,” says Fred. ‘The combine has good capacity, especially in downed corn, The planter is very accurate on planting rates in corn when set to charts in the book. Bean rates are less accurate. Very poor service on both products from the dealer I bought them from."
James E. Baltzly, Beach City, Ohio: He nominates his 1978 John Deere Turbo 7700 combine as ‘best buy”. Did a good job in our small grain as well as in corn. As you always do with a new machine, we had a few minor problems that the dealer fixed right away. The Deere 643 corn head is one heck of a good head. Didn't use a wrench on it in 1,000 acres.” i a om maeaegeege@ ageasaeeaeuess ~~ 2S BVUIINUG iro tv Randomly si farmers ‘“‘tel it is” in nom their ‘‘best’’ “worst” buy by Harold M. Edito. Farmer Best, W , 8 OFARM SHOow 2 & PU VAN VVE elected ] it like linating and S. Johnson r A s Nom ‘lorst B eae wy Samy Hevea rsa Swe se “This tractor has been in the shop almost constantly,”’ says LeRoy about his 1977 IH 1086 tractor. “It’s a sorry tractor from front to rear. Front end wheels are weak, gears lock, it's hard to shift, clutch is hard to press and won't stop without grinding gears, hydraulic and power lift cause trouble, cab doors are weak, and the air conditioning fans are poor. “The tractor has not been abused in any way," he points out. “I have a 1973 Deere that’s been in the shop only once and a 1975 Deere that's been in only twice, and they've been driven and maintained by the same operators. Our 1975 1566 IH has been about the same as the 1086 for trouble. There won't be any more IH tractors on my farms." On the positive side, LeRoy says his John Deere 7100 Max-Emerge planter “is the best planter made. Linate plant corn, soybeans, cotton and milo and am pleased with this planter on all my crops, Especially like the seed depth adjustment, the speed of changing seed drop, and the way it handles herbicides."
Gary Domnick, Morris, Minn: “This must be the poorest piece of equipment ever painted green,"’ says Gary about his ‘worst buy” John Deere Model 3800 forage harvester. “Within the first 10 minutes of operation, one bearing got hot and had to be replaced. The next day the balls in another bearing crushed and fell apart. Three other bearings went during the first 200 acres. Needless to say, I've had two John Deere choppers — the first and the last.” On the plus side, Gary's well pleased with Arts-Way manufacturing’s Model 400 digital Electronic Scale by Weigh-Tronix, ‘I had this TELE inate — Pa scale mounted on a new Harsh mixer wagon and I've never seen a scale like better,’ he reports. “You can program the nutrients in the load without leaving the tractor seat by aiming the control box toward your loader. In a year of use — in rain and snow and with temperatures ranging from 30° below zero to 90° — it's never failed.”
Don R. Luddington, Ephrata, Wash: Don nominates a John Deere 110 disc as his ‘worst buy”. “I lost track of the number of wheel and gang bearings replaced, after the second set all around,” he explained. “The scrapers were so weak they bent down and cut the spools after hitting a rock. The dealer wouldn't help but, because we complained, a factory representative for John Deere came to the farm and explained that it looked like the disc wasn't made for rough terrain, a fact not indicated in their literature." Don's “best buy” is an IH 490 disc. “I bought this to replace my ‘worst buy” disc. It has smooth action on hilly terrain, and where most equip ment would bury itself at the back, this disc is flexible and moves at an even depth, Easy to lift and move hydraulically. Does a beautiful job.” George Lee Streit, Electra, Texas: George is happy with Koehn's Wac-A-Trac. “‘It did a remarkable job of getting rid of tractor tracks ahead of grain drills. You could still turn short. Eliminated skips in the field from tractor tracks.” George is disappointed with the Speed-King 34-ft. auger he bought. “Flighting came off the bar six times in the first 10,000 bushels, 12 or 14 bearings have been knocked out in the drive-line and it's so poorly balanced it has to be moved with a tractor. It can’t be handled except by 2 or 3 men.”
Clarence C. Folkerts, Carleton, Nebr: He’s pleased with his Orthman flex-gang 12-row cultivator. “It follows the terrain well, with no gouging or skimming over the top. Each gang is flexible and gauged with a rubber tire. Stays on the row well with two disc stabilizers. We use it on a 4020 John Deere 3-pt. hitch and it does well with a lift assist wheel.” Jay Long, Nome, Texas: ‘‘Our Massey-Ferguson 750 combine will thresh all the rice you can stick in it, and produce a good clean, undamaged sample. Has good power in mud and is an all-around quality machine.” Jay adds that he likes his Krause 27-ft. disc harrow. ‘Keeps the ground level and I can plow 15 acres an hour with it,” he says.
Lester Wehr, Keota, Iowa: Lester likes his Ford 9700 tractor. ‘This is the most trouble-free tractor on the market. Never a breakdown in the field and it has more power than our John Deere 4440." He adds that his 1978 Ford F-150 pickup is also a “‘best buy”. ‘We have 40,000 miles on it and no sign of any problems. The best pickup we have ever owned.” Heading his ‘‘worst buy” list is his John Deere 4440 tractor. “At 100 hours the main bearings went and ruined the engine block, and al 300 hours the hydraulic system failed.” Lester also has had trouble with his Chevrolet C-20 pickup. “It was a lemon from the start,” he says. “The motor went out at 3,500 miles and two weeks later the transmission went out. Am buying nothing but Ford 150's from now on.”
Ivan Jones, Oakley, Ill.: He’s happy with his John Deere 7000 planter (six 30-in. rows). “It puts seed in the ground at an even depth and is reasonably accurate on the population count. And, with the Max Emerge units, seed germinates sooner.” Sam Lambert, Pontiac, IL: “Our IH Fleetstar diesel tandem axle grain truck, licensed for 50,000 Ibs., gets better fuel mileage than the smaller truck we traded it in for. It's dependable, quiet, pulls well, keeps up speed and has a good cab." On the negative side, Sam's disappointed with his Massey-Ferguson 760 Combine. ‘This combine has had fuel line leaks, oil leaks, broken hubs, bearing failure, belt failures, loose bolts that allowed parts to come off and go through the combine, electrical problems, and steering troubles.” Sam also has had problems with his Massey Ferguson 2705 tractor. “We've had fuel leaks, water level and temperature problems, trouble shifting and the draft control is very poor. must say our dealer has been good but finds it hard to keep up with all the problems.” Sam adds that he appreciates FARM SHOW's ‘Best and Worst * buys section. “Companies can't give us the old routine anymore that our unit is the only one with problems. We expect problems with new machines but some things become intolerable and telling people about them can only help.” Phillip Zelhart, Papineau, IL.: He nominates his 1979 Ford F-250 4-wheel drive Ranger pickup as his “best buy”. “This pickup drives so much better than the 1977 I traded in on it, it’s unbelievable,” says Phillip. “It rides more like a 2-wheel drive and handles like a car. With the 4-wheel drive, it takes the place of an extra tractor. I've even pulled out stuck tractors with it. Unbeatable performance.”
Elmer Ridder, Marienthal, Kan: He's pleased with PAG corn and milo seed. “I''ve planted PAG seeds for several years and am very satisfied with the results. The new milo varieties that came out last year have great potential and we're looking forward to trying the new SX 333 corn number.” On the minus side, he’s had trouble with his IH 150 hoe drill. “When first went to drill wheat in dry soil —1 live in western Kansas — I found IH had changed the drill boot from the way it was on the older 150 models, which were as good as any I've ever seen. They changed the angle of the point so the seed does not get to the bottom of the furrow. My dealer is trying to see what can be done but IH doesn't seem to care since this is probably a problem only in ourarea.” Carroll T. Keller, Rio Medina, Texas: His best buys are John Deere's 653 row-crop header and 40 series cornhead. ‘We use both headers on our IH 1460 combine with the aid ofa Bish head-changer, which works great,’ reports Carroll. “The rowcrop head is just the thing to get every bit ofa milo or soybean crop into your combine. We've had no problems with the header in two seasons. The Deere cornhead is unbeatable, and I've owned and seen other cornheads.” Carroll adds that his IH 1460 Axial Flow “works great in certain conditions, but in our dry south Texas cornfields its productivity is very low. However, they're still trying to improve the machine. “T also wish IH would improve their parts system,’ he adds. ‘The dealer has no parts, the Dallas branch has few parts and, if it has to come from the factory, they send it by turtle-back express."
Brian Huber, Cedar Falls, Iowa: He's happy with his Valley Electric corner irrigation system, model 1234. “It has even water distribution and we've had excellent service. The machine performs flawles¢ly.”’ On the minus side, he's disappointed with ‘‘John Deere’s Monatrol for the Max-Emerge planter. We had numerous blown fuses caused by an undersized motor on the variable speed drive,” he points out. “This failure caused uneven population, frequent activation of the alarm and operator frustration.”
James Autry, Fayetteville, N.C: “The tractor has more shop hours than it does field hours,’’ reports James about his John Deere 8430. ‘It's a pleasure to operate but has had one problem after another. We've had an awful lot of hydraulic problems and transmission trouble, as well as fuel pressure problems.” On the plus side, James likes his TH 10 ( FARM SHOW a4 ‘st’? Buys 490 disc harrow. “We've been wellpleased with the way it flexes to the contour of the land, Seems to pull easier than comparable size discs with rigid frames.”’
Crayton Bouchie, Blunt, S. Dak: “It's justan outstanding loader,” says Crayton about his John Deere 158 loader. “I've used it for hauling dirt, manure, silage, rocks, sand, and more. We've had no breakdowns whatsoever.” Crayton nominates as his ‘worst buy" his 1978 Chevrolet 4-wheel drive pickup. ‘‘First off, we had trouble with it not starting and finally discovered a faulty starter coil,” he reports. “Then it started burning a quart of oil every 400 miles and got steadily worse. Finally, after burning a quart every 150 miles, I got it overhauled. Luckily I had the extra three-year, or 36,000 mile warranty, so Chevrolet is paying for everything.”
David Zigler, Veedersburg, Ind: “I like the overall appearance, power, controls and quiet cab on my John Deere 4440 tractor. Also, it's nice to know your wile enjoys driving it as well as yourself.” Calvin Wegner, Beasely, Texas: *' bought a John Blue fertilizer attachment to fit on my hippers. It enables me to fertilize and hip my land in one operation. Otherwise, I'd have to run two tractors instead of one. Saves labor, fuel and time.” On the minus side, Calvin says, “I don’t believe I'll ever own another Ford, When the air conditioner went out on my F-100 pickup, the dealer charged me over $400 to fix it and messed up the heater in the process. It also weaved on the road and couldn't be fixed. Burned a quart of oil every 250 miles with less than 38,000 miles on it.”
J. P. Barlow, Smithfield Va: The John Deere 7100 planter is the best corn and soybean planter I've ever used. Equipped with the V-wing attachment, it'll do a good job of planting in rough and cloddy land.”
Dale Updahl, Manfred, N. Dak: He's unhappy with his John Deere 300 stack wagon. “It sucked up too much dirt, and you couldn't see when it was full from the cab of our tractor.” On the other hand, he says his 4440 John Deere diesel tractor “has a quiet cab, is nice and easy to handle.”
Clayton Berg, Hendrum, Minn: He rates his John Deere model 230 tandem disc a “best buy’. “It's a lot heavier than the one! had. Just what I need on my sunflower ground.”
Mark Ploger, Kinsley, Kan: Heading his list of “best buys” is his 1977 850 Versatile tractor. “The Versatile covers almost twice as much ground in an hour as our 4520 John Deere on three gallons less fuel, with each tractor pulling equipment matched to its respective horsepower. It's performed way beyond my expectations.” . On the other hand, Mark's had problems with his pickup. ‘'l guess Jeeps are just what they advertise them to be —recreational vehicles,” he says about his 1979 Jeep %-ton pickup. ‘The workmanship on it is poor. The doors don't fit tight or close properly, the windshield wipers quit working and a seal! was qut in the rear end, to name a few things. The first time I drove it, noticed that it rode awfully rough. The dealer told us balancing the tires would smooth this out, but after some checking, we found the front drive shaft to be bent. But the biggest drawback is the catalytic converter, which is on all ‘79 pickups. The Jeep sits low enough to the ground that won't be able to drive it in stubble fields or any dry grass pastures without setting them on fire."’
Ed Ratashak, Osceola, Iowa: [le likes his John Deere 1850 Field Conditioner. “We had a very wet, late spring and this was the only tillage tool used on soybean stubble before planting, It produced a level seedbed and really appreciated the 12-ft. transport width,” On the negative side, Ed is disappointed with his 60-ft., 8-in. Snowco portable grain auger. "I had only used the auger a few days when the pto gearbox went out,” he points out. “Because of the design and location of the gear box, the gear lubricant can’t be checked without taking the box completely off. The box hadn't been filled before auger assembly. Consequently, [had to waita week for a new gear box to arrive during peak corn harvest period.”
Alwin Stauffer, Jamestown, Mo: He's had trouble with his John Deere 410 round baler. “Once the core formed, it would bale okay, but we had trouble getting it started. The belts would swing out of line and jam the machine to a dead stop.” Alwin traded it off for his “best buy” New Holland 845 baler. ‘This machine has no faults that know of. No trouble starting the bale core and it makes a nice bale,”
Verlynn LeVan, Elgin, Minn: “Three years ago, we purchased a Wil-Rich 25-ft. chisel plow. We were continually breaking teeth, contacted the company and they are now linate going to replace all the teeth free of charge. This indicates the company is willing to guarantee a quality machine." Also on Verlynn's “best buy” list is Deere’s 6600 combine: ‘‘We used this machine for seven harvests and did nothing other than replace some chains and belts. We replaced it last year with a new 7700, only because we needed the extra capacity. We hope this new one will perform as well as the older one.”
Ed McCanse, Oregon, Ill.: “My worst buy. by far, was a Tye drill for drilling soybeans. On uneven ground, there's no possible way that it can avoid planting beans at all depths, from several inches deep to on the surface. It cost me a crop to learn.” Ed nominates two best buys: “One is a John Deere Max-imerge planter “It cost me a crop to learn.” which does a fine job of placing the seed at an even depth, It also has the unique ability to keep the coulter discs clean and keep them turning in trash due to the wiping action of the gauge wheels. My other best buy is a Kinze grain cart. Although we had some problems with the discharge auger drive lugs tearing out, it allows us to dump on the go and increased harvest speed almost 50%, using large flotation tires, which are essential.”
Jessie L. Siebert, Ephrata, Wash: “Next time I'm going to hold back part of the payment until everything is satisfactory,’ states Jessie who likes the John Deere 158 front end loader he bought but had a bad ex“Next time I’m going to hold back part of the payment until everything is satisfactory.”’ perience with the dealer who sold it to him. ‘The loader is made rugged and tough, is easy to put on and take off, and uses hydraulics built into the tractor, “The problem was that I paid cash for the loader and the dismounting stand. got the loader okay but the stand wasn't available and 10 months later still didn’t have all the parts for it, Poor effort on the part of the dealer tc get them and see that was satisfied.”
Myron Wehr, New Waterford, Ohio: “Uses far less fuel than one would expect from a tractor this size,"’ reports Myron of his John Deere 4840 tractor. We're using less fuel per acre than any previous comparable tractor we've owned. Also has more pulling power than expected. No problems after 350 hours.” On the negative side, he’s had trouble with his ‘IH No. 11 Subsoiler. The automatic resets would not reset when we bought it. Even after that problem was partially corrected, the standards showed excess wear. Dealer service was excellent but TH help to the dealer was poor.”
Ken Edmondson, Danville, Ind: He notes that his Deere 653 row crop bean head “started off its first season in the worst buy category. We have many rocks on our farm which would constantly lodge in the gathering belts, causing damage to the belts and also to the rotating and stationary knives. It was not uncommon to spend an houra day replacing broken knives, repairing torn belts, and adjusting belts and chains. “At the start of last year's harvest season, we installed rock guards, hardened stationary knives and the new-style rotating knives. These 3 items cost over $100 per row but were well worth it in terms of increased producitivity. The rock guards deflected the rocks away from the knives and belts, therefore eliminating most of the previous problems. The new-style knives lasted 900 acres with very little attention. It's too bad Deere waited so long to make improvements, but at least now they have a tool which will doa superb job of harvesting soybeans in rocky field conditions,”
Mrs. Robert Burnside, Ponder, Tex: She likes the Steiger Panther. “1 put nearly 600 relatively trouble-free hours on it in 4 mos. It pulled all the equipment beautifully, the only problem being that the seat won't lower. I'm 5 ft., 2 in. tall and can't touch the floor, so I have to push the seat all the way back and sit on the edge of it. “We also have problems with the seat in our new John Deere 4440 tractor. The new hydraulic seat gives both me and one of our hired hands terrific backaches, and again, the seat won't go low enough. It's more comfortable out of hydraulic control, but still gives me a bachache.”
Patrick Quinn, Montery, La: On the negative side, he’s disappointed with “Cobex preplant herbicide. We had an unusually heavy amount of rainfall the latter part of May last year, The Cobex failed to hold the weeds after this heavy rain, I won't use it anymore.” On the positive side, he’s happy with his Deere 4840 tractor. The best part of the tractor is the new seat, along with the power shift transmission. It has plenty of power, yet handles with ease. We had some minor problems but the dealer has corrected them.”
Nelson Eberly, Pigeon, Mich.: "'It's a wonderful piece of machinery,” Nelson says about his John Deere 5460 self-propelled chopper purchased in the fall of 1977. ‘We'd had all kinds of trouble because of wet weather but this chopper, with optional 4-wheel-drive, had no trouble whatsoever, Did far more than we ever hoped for.”
Gaylord Northrop, Corry, Pa: ‘It does a good job of loading manure from our high-rise poultry house, and loading gravel in the gravel pit. Its hydrostatic forward and reverse pedals make it fast and easy to operate,” says Gaylord of his “IH 2400 tractor loader with hydrostatic,” Earl Kuntz, Abilene, Kan. “A Sears portable sander-grinder, Model 315, was among my worst buys. It always made a grinding noise inside like it had a bearing going out. The directions said it was greased and sealed at the factory. It quit after a year — the armature was ruined. took it back to Sears and they said they would fix it, but it's been three months and they've heard nothing and don't have any papers on it.” Gilbert Livingood, Postville, lowa. Does a good job of spreading, says Gilbert of his Deere 680 spreader. ‘We pile on big loads. It really holds a lot of stuff. And, with the top beater, does a good job of spreading.”
Rene Rozanak, Exeter, Neb: Heading his best buy list is a Walterscheid claw hitch mounted on his Deere 4430 tractor (“You just back up, hook up and go. Saves a lot of time.”’) and a new Deere 7100 6-row planter (“Very pleased with it. Seed depth and placement is very good").
Verlyn Naimon, Geneva, Neb: ‘It has good trash clearance and does a good job of turning under stubble,” says Verlyn of his ‘best buy’’ Massey Ferguson semi-mounted plow, a Model 880 with 7 16-in. bottoms. “It’s the easiest pulling plow I have ever owned. Also, my 4430 Deere tractor is the best I've ever had. The controls are all very easy to reach. The cab is quiet, visibility is good. It is a pleasure to drive.”
Oliver Hagg, Salina, Kan: He says one of his best buys has been the new steel epoxy glue ‘The steering arm on my 1466 tractor would work loose on the splines. Instead of buying $200 worth of new replacement parts, he bought two small tubes of the epoxy glue for $3 and solved the problem, adding that he has used the all-purpose glue for dozens of other jobs around the farm and in his farm shop.” He buys it at a local Auto Supply store. Alan Benedict, Monmouth, Or.: He's pleased with his “best buy" John Deere 8350 grain dril! “You can plant 100 lbs. of seed per acre and apply 150 Ibs. of fertilizer and still only have to stop every 10 acres to fill. Also, the fertilizer feed works well under conditions without plugging up”
Jim Richardson, Marion, N.Y: “We're using less seed than ever before and getting almost perfect stands,” says Jim about his John Deere Max Emerge 7000 planter. ‘We planted 2300 acres of corn in 1978 and it performed perfectly no matter what kind of soil we were planting in. Depth is easy to adjust.”
Robert E. Heyen, Petersburg, Ill.: He’s been happy with his new John Deere 4440 diesel tractor. “Like the new hydraulic seat, larger fuel tank and cab,” he reports. Robert's had trouble with a Sears air-operated grease gun, “Just won't work if held upside down,” he reports.
Frank Thomas, Danville, Ind: “My old John Deere grain drill was something you could be proud of — this new drill isn't,’ says Frank, who's unhappy with his model 8200 John Deere wheat drill. “It’s very poorly constructed. The John Deere cylinder strains the tongue and the whole drill when extended, The press wheels don't roll when the ground is damp and the acre counter has never been accurate. Dealer did give us anew marker, but it's still not right.” On the plus side, Frank is well pleased with his 4430 John Deere tractor. ‘After 9500 hours we've had no great problems, You never have to touch the brake and I think John Deere has the best hydraulic system of any tractor manufacturer, although their seats have never been as comfortable as Allis Chalmers or International Harvester."
Jerry Reuble, Coupeville, Wash.: “I'm having to do a lot of 'beefing up' just to keep this machine going,” says Jerry of his 12-row Farmhand cultivator. “It does a good job if conditions are ideal. But, when on rocky soil, the teeth break off right at the shovel, For a cultivator this big, the material it's made of is not strong enough,” Jerry, nominates his Deere 4640 tractor as a best buy. “Its lugging power, compared to any previous John Deere I've seen, is unbelievable. Its engine, teamed up with the power shift transmission, will keep you moving under most adverse conditions. I also like the all-day fuel tank, deluxe seat and quiet cab.”’
Norris Syverson, McIntosh, Minn: “Anyone know what's wrong?" asks Norris who's had problems with his International 1066 tractor. ‘‘After 320 hours, it started using a quart of oil every four hours and now, at 1600 hours, it uses a quart every two hours. “T thought I would get some help because the tractor had a one year Linate guarantee, but it was as though they didn't care about you or the trouble you were having. I talked to the block man and he said he would come out but never did, so I still have my oil problem, Also, the brakes are lousy and the hydraulic seat is like sitting on a stone. Besides these problems, like the tractor real well. It has excellent lugging power.” Norris nominates his Deere 500 round baler as a best buy. ‘Doesn't take much power to operate, The pickup on itis poor, however. It’s not the floating type. When ina soft field, the teeth dig into the ground.”
W. G. Craig, Tvronza, Ark: “‘It is by far the best planter I’ve ever used,” he says of his Deere 8 row Model 7100 planter. “It is easy to change the seed rate setting for different sized beans. The planting depth is constant and easy to set.” He adds that “The worst buy I made was Cobex herbicide. I applied it on 50 acres of cotton and had the worst infestation of grass and weeds (pigweed) ever. It cut the yield 50% below my other cotton. also have grass in my soybean fields where applied Cobex herbicide. had no problems where used another brand of herbicide. It was my first and last purchase of Cobex.” .
W. C. Watson, Aberdeen, Miss: He's disappointed with “two 8 ton M & W Little Red wagons. First, the grease retainers wouldn't stay in, which let in dirt to wear out the bear“T could write a whole page on this disaster.”’ ings. Then, the hub bolts would turn off if you went to take off a wheel. If you had a flat, you'd have to take off the whole wheel, bearings and all. I could write a whole page on this disaster," On the plus side, he notes that his Deere 7100 8-row Niax Emerge planter with a seed monitor is ‘‘the most trouble-free planter I've ever used, Planted all seed approximately the same depth so we got a good stand, My son, Chip, is also well pleased. The seed monitor is a must in a planter that size since it saved us from having several large skips.”
Dwight Brown, Wynne, Ark: ‘It was the best work truck I've owned but I couldn't keep it out ofthe shop,” says Dwight of his 1977 Ford F-250 four-wheel drive. "I put two transmissions in it, gas mileage was poor and I had to put is 2 power steering pumps and lifters on the motors. At 25,000 miles I got rid of it.” On the plus side, Dwight nominates his IH 915 rice combine as a best buy. ‘It is one of the better combines to keep serviced and maintained. It is a lot easier to work on than the John Deere which previously owned. I wish they would improve the comfort from the operator's seat to the steering wheel. It. does a. good job cutting rice in all kinds of conditions.”
John Wing, Mechanicsburg, Ohio: John’s “best buy” nomination is the USS Cold Flow NH3 box he bought. “We applied 450 acres of Cold Flow to soybean stubble and previously plowed ground last falland had very little if any, loss. The ammonia ap- plied will be there come planting time this spring. We were shooting for 170 lbs. N applied per acre and achieved 173 Ibs. by weight. The Cold Flow box was mounted on a 28% ft. Deere field cultivator and used 2-in. double-pointed spades. We made our own row applicators.”
Gerald and David Damaske, Victor, N.Y: “The Webster 810 wet lime/fertilizer spreader is very well built and works very well. We also had it equipped witha ‘seeder’ which works well for applying 10 to 20 lbs. per acre of Borate 68," says David. “Good service. After planting, the company president stopped by to see if we were having any problems.” David adds that “we adapted a Deere 443 corn head to our New Idea Uni-System. We feel, from the performance it gave us, that it's the best head on the market. Very little maintenance.” David registered disappointment with ‘‘an insecticide kit for our Deere 7000 corn planter. After one season of use, the fiberglass hoppers cracked and leaked insecticide. Deere gave us no satisfaction on the warranty.”
David C. Barton, Raymond, Miss: “Talways thought it was the nature of combines to break down constantly because that’s what happened with the first two owned. But I've had only three hours down time in two seasons with my Deere 4400 combine. It does an excellent job in soybeans and takes weeds well without choking. Very little crop loss.”
Wayne Lane, Elizabeth, Colo: “Our new Deere 7700 combine this year was our third new John Deere in four years. As with the others, we have had excellent service from the machine and fantastic help from dealers all along our custom harvest route, I'm sure we'll continue to buy Deere combines. “One of the worst buys ever made was 4 1978 3/4-ton Ford pickup with a 400 CID engine, It was never completely put together at the factory The front end was loose and the clutch was never properly adjusted, The dealer never did a pre-delivery prep and never had time to fix the wrongs. This was the eleventh Ford I've owned in 10 years but now I'm looking at Chevrolet.”
Jack Bieri, Letts, Iowa: He's disappointed with his American 2416 automatic batch dryer. “They've serviced it six times and it still doesn't work right. When we bought it in 1977, it was delivered two months late and then didn't work properly. One time last year, we waited four days for service.” Jack is happy with his Deere 4630 tractor (‘Had no trouble with itat all’) and a 7200 combine (‘‘Got 1000 hrs. on it and have had very little trouble. The few problems we did have were taken care of by the dealer’).
Donnie Collins, Centralia, Mo: ‘“‘We saved several thousand dollars by buying a Ford 8700 tractor instead of a John Deere or Allis Chalmers model of the same size. We own a John Deere tractor and three Allis Chalmers but the Ford 8700 is the only one that has gone a full season without a breakdown. We were so satisfied we bought a Ford 9700 to go along with the 8700,” Donnie adds that he’s ‘very pleased with our Deere 7700 planter, especially last year when planting was late. We could easily plant 90 acres in a half day, leaving the other half to work our ground.”
George Ruppel, Vincennes, Ind.: “It's a shame they did not do better with a good idea. I think they should recall them and furnish us a combine as good as they wanted us to think we were buying,” says George Ruppel, Vincennes, Ind., who is disappointed with some features on his International Axial-Flow “rotary’’ combine. On the plus side, George notes that, “the machine is build around what appears to be a better threshing setup than the usual cylinder. It has a quiet cab which I wish was fully centered. think the rear mounted motor is ina good place and also the fuel tank. In 130 acres of beans with some bad spots of weeds and grass, we had no stops due to rotor wrapping or plugging — even in green, viney black beans. “On the minus side, the machine shows a real lack of plain common sense on the part of those who designed it. Many simple, easily available conveniences are lacking. They left. too many corners, pockets, ledges, and flat irons to hold grain in a tank that should be self cleaning. linate Also, there are many places inside the main machine where trash, dust and grain mixture collect — bushels of it. The floating cutterbar is not built for easy, smooth feed to the platform auger. Even after being checked by the dealer, the brakes are nearly worthless. The gear shift does not operate as positively and accurately as it should for safety.” George adds that one of the ‘‘best buys” he made last year was a Deere 7000 Max-Emerge 8-row corn and bean planter with Tru-Vee double disk openers. ‘The position of the depth regulating wheels is a big help toward accurate planting. The folding tongue is fine for road transportation. After thorough adjustment and tightening to make up for some sloppy assembly, and adding some improvements of our own, I think we have a good planter.” Here’s how other randomlyselected FARM SHOW readers sizeup “best” and ‘‘worst’’ buys they've made recently:
Edward Shute, Red Cloud, Neb: On the plus side, he's well pleased with his Deere 1214 pull-type swather. “This machine ran all summer with no breakdowns, It came from the dealer serviced and ready to go. Was one of the few machines have bought lately that has good workmanship.” On the minus side, Edward is disappointed with “Genisis II and Medina soil conditioners. I used these 2 products on irrigated corn ground — fortunately, on a relatively small scale. Both of these products were used like the company suggested. They did no more good than the water carrier applied with them.
Donald Griffith, Glenwood, Mo: “The best buy have ever made in haying equipment is my Vicon disk mower. After owning mowers by Deere, International and David Bradley, and windrowers by Hesston, New Holland and Deere, and an MC Rotary Scythe, wish very much that could have had a Vicon 34 years ago. We mowed 710 acres of hay last summer and never had to stop mowing, despite a lot of rocks and multiflora rosa. We replaced a few blades but never had to stop mowing because of rock damage or rain. Mowed many acres at night. Mowing in conjunction with a New Holland windrower in alfalfa, the Vicon-mowed hay was able to be baled in big bales a day before the windrowed hay, beating a disastrous 4 in. rain.”
Larry Hoover, Millersport, Ohio: “My best purchase is a Deere 6600 combine with Flex-Header and 6 row cornhead, I am very pleased with the header. You just place it on automatic and lower the header to combine beans. You never have to adjust header height during combining — just put the control on automatic. No broken guards and no dirt in the bin.” Also on Larry’s ‘best buy” list is Rid-A-Bird, a product he first read about in FARM SHOW. Manufactured by the Rid-a-Bird Co., Muscatine, Iowa, it uses a “poison perch” which is laced with a chemical, to keep unwanted birds out of buildings. ‘It works,” says Larry.
Max Huston, Montour Falls, N.Y: “It's lived up to all my expectations,” says Max about his Kioritz power scythe. “It has three cutting attachments: nylon cord, brush blade, and saw blade. The brush blade will mow grass as well as cul brush up to ¥% in. in dia, The unit iteself is extremely lightweight (6.8 ky.) and well balanced, It’s one of the best buys we've ever made!” Max says his “worst buy of the year” was his Cadillac Coupe deVille. ‘At first the dealer had the car more than did. The paint didn't match, there was a bad short in the dash and the radio quit working, the seal ripped out 4 times, car would stay on fast idle for over 1/2 hour, the vinyl roof pulled loose, and the power seat wouldn't work. The dealer was extremely reluctant to admit anything was wrong, much less attempt to fix it.” Harry Anderson, Eagle Lake, Texas: “My 8630 John Deere 8630 tractor cost $10,000 more than competitive brands but the dealer performance is excellent. We have two strong Deere dealers in this ricefarming area, and dealer performance is 75% of machine output.” Harry wishes Deere would make combines for rice “the way they used to. Deere discontinued the 105 combine in 1969 and IT discontinued the 915 series in 1977. These machines were the last durable, simple, de pendable combines in rice.” Harry now has a 1974 Deere 7700 combine which he says works fine in soybeans but only fair in rice.
Dwight Strassheim, Oakville, Iowa: “My Superior 8-in., 57-ft. pto auger was a real bummer, The auger screw was not welded tight to the center shaft, which made it too big for the tube. After twisting the pto shaft off twice — $150 in repairs after 10 hours use — pulled the screw out of the tube and found the splice in the middle put in backwards and not welded, Also, the deflector at the top of the auger was factory bent the wrong direction, “After three weeks of telephone conversations with the district man and absolutely no help whatsoever, told him the next call was going to the company president at 7:00 that night. Thirty minutes later he called back and said they were shipping me a new screw — prepaid.” Dwight's best buy was a Deere 8434 tractor which “has power to spare, is easy to handle in tight spots and has excellent hydraulics. After owning IH tractors for 10 years now understand why J.D. costs more — they're worth more!" Dwight adds that his Case 1816 Uni-Loader is the “handiest thing on the farm and as easy to operate as a scoop shovel.”
Dick Schmidt, Plaza, Wash: “W. traded our older Deere 6602 combine for a new one and, by equipping it with a 77A series watchdog monitor, got a team that in many cases two combines couldn't match. It not only monitors most of the major combine functions for slowdown or belt slippage and warns the operator of hot bearings, belts or pulleys, but at the same time gives hima digital readout of grain loss. Here in the rolling hills of the Palouse Country, we raise peas, lentils, barley and wheat. Changing from one crop to another is sometimes a daily occurrence. ‘This monitor helps us do that ina matter of minutes — and on-the-go right from the operator's seat. When we're through harvesting, we slip our Watchdog monitor out of the combine and into the tractor cab. A few seconds job and we're ready to start seeding with our ‘little miracle box’ tending the chores of the three grain drills.”
Earl Aeker, Piedmont, Ala: ‘It really holds the ground. Floats over rocks and ridges real good. Gets more 14 C FARM SHOW 2- st” Buys page) beans than a ridgid cutter bar,” says Earl of his ‘best buy” Deere 4400 combine with flexible cutter bar platform. Donald H. Meierhofer, Minonk, IL: ‘I'm very well satisfied with the service and clean grain samples from my New Holland TR-70 combine. The Cat 3208 engine could use a lit“We use a Deere header on our TR-70 combine. Works great.” tle more power when unloading heavy corn on the go. We bought a Bish Header Adapter Kit, which allows us to use a John Deere 6-row corn and row crop header on the TR-70. Works great.”
Herb Hall, Prophetstown, Ill.: He says his Deere 6-row soybean header “saved the day” a vear ago this fall. “Like many others, we got caught by the early snows with part of our crop still standing. With our new 6-row Deere soybean header, we were able to combine beans in the snow. The snouts actually pulled beans out of the snow, giving us a good quality, marketable product, with little or no loss."’ Herb is disappointed with his ‘“JavKee goosneck trailer with grain box. At the factory, they put the wrong axles under the chassis, thus weakening the trailer. To date we have broken two axles. The dealer has admitted that the wrong axles were used and that all the axles should be replaced. However, neither he nor JayKee has ever made any kind of arrangement to replace these axles,” Michael Doherty, Dunningham, Ca.: “In my estimation, Stauffer knows they have a captive market,” says Michael, who is disappointed with “Stauffer’s Ordran rice water grass control chemical. Purchased more material this year. Application rate was increased from 30 to 40 lbs. per acre — and no drop in price of the material. Control was lousy.”
Lyle Fischer, Blanchardville, Wis: “I don't have a worst buy but my gripe is with machines not being field ready when offered for sale to farmers. On our baler, a hydraulic coupler came loose and we lost 5 gal. of oil from the kicker. We bought new saddle tanks and a crop sprayer. We had trouble calibrating the sprayer, then discovered that it was impossible to calibrate because of a filter which had been installed backwards at the factory.” Lyle is well pleased with his Deere 336 baler with kicker, noting that “it really eats hay, yet runs quiet. Has a wide pickup for wide windrows”.
Fred Schlinder, Baerrton, Kan: "After using a baler of another make, which was a lot older, it is such a pleasure to be able to bale at the same speed that I can swath the hay,” says Fred of his Deere 346 baler.
Jimmie Smith, Elliott, Iowa: He nominates an International 400 8-row planter, equipped with a Cyclo Il monitor, as his best buy: ‘1 was really impressed with the planter because of its single hopper and speed. But was really surprised with the Cyclo Il monitor. It takes all of the worry out of planting. This was my first 8-row planter and my first air planter so was somewhat apprehensive. But, after the first day, the worry was over. Also, my dealer bent over backwards helping me get started.” Jimmie adds that ‘‘one of my worst buys was a Tiller Rod. I planted in trashy conditions and had a lot of trouble with it dragging trash. Also, I didn't have much luck with the positive depth wheels and covering blades on the International planter. Trash built up in front of the insecticide banding attachment, causing the packer wheels to drag. I traded the wheels back to the dealer for covering disks and solved the problem.” 3UYING TIPS Random farmers it is’ in their ‘‘b ‘‘worst”’ by Harol I Li Best, 8 7 FARM SHow 2-~ ) YOU CAN USE ily selected ‘tell it like nominating est’? and ' buys. d M. Johnson ‘ditor ers Nom Worst B ae eee “I'm having to do a lot of ‘beefing up’ just to keep this machine going,” says Jerry of his 12-row Farmhand cultivator. “It does a good job if conditions are ideal. But, when on rocky soil, the teeth break off right at the shovel, For a cultivator this big, the material it's made of is not strong enough,” Jerry, nominates his Deere 4640 tractor as a best buy. “Its lugging power, compared to any previous John Deere I've seen, is unbelievable. Its engine, teamed up with the power shift transmission, will keep you moving under most adverse conditions. I also like the all-day fuel tank, deluxe seat and quiet cab.”’
Doyne Emery, Macy, Ind: Doyne Emery, Macy, Ind.: “Nothing but trouble since we've had it,” he says of his Sukup Stirway, a grain stirring device. ‘Sail switches won't work, gears and augers break. belts burn up, pullies won't stay on motors, and flexible couplings break.” Doyne, who farms in partnership with his son David. also faults the plow-down attachment on_ their Better-Bilt liquid manure spreader: “It's made out of soft steel and instead of shearing the pin, it bends or breaks.” On the plus side, Doyne is happy with his Harvestore 2080 for shelled corn (‘You get the same quality of corn out for feed as goes in, The savings by not having to dry will pay for it in about 7 years") and his Deere mode] 230, 22-ft. disk (‘It’s heavy enough to cut what you run over and gets the job done fast").
Eldon Getz, Wolcott, Ind: Eldon Getz, Wolcott, Ind.:; “The auger was a complete failure. Barely moved corn. It cost $500 and when returned it only got $300 back. Was a big job to mount but never worked,” says Eldon of his ‘“hydraulic-driven 10 in. auger from R & R Mfg. Co.” Eldon is well pleased with his Deere 7000 planter and rotary hoe, “ got an excellent stand. It's a toolbar so l added extra rows and plant beans in 18-in. rows. Rotary hoe works good.”
LeRoy Longtin, Manteno, Ill: LeRoy Longtin, Mantera, III; He's happy with Basagran (‘Did a real good job on my bean fields’’) and his Deere 653 row crop head for soybeans (“It did a good job picking up beans and with no need to watch. Made combining so much easier"’),
Earl Fuhrman, Cummings, Kan: Earl Fuhrman, Cummings, Kan.: He's sold on his new tillage tool called the Hoe-boe, manufactured by Lee Blacksmith, Rochelle, Ill. “We purchased the Hoe-Boe plow late last fall but used it mostly last spring. It plows, rips, chisels and loosens the ground 100%. The machine works fast — enables us to go in wet ground, follow with a disk and plant. Saved lots of time last spring and gave us a good seedbed. Well worth what it costs." Earl adds that he took matters into his own hands to get satisfactory performance out of his 510 Deere round “We had trouble, lots of trouble. Could not get help from the factory.” baler, purchased in the summer of '77. “We had trouble — lots of trouble. Could not get help from the factory. Last winter, the baler was recalled for minor modification. Then, we took a cutting torch to it. Now, the baler works fine and we're real happy with it.”
Martin Schroeder, Orion, Ill: Martin Schroeder, Orion, IIL: “ like the even depth of seed placement and the way the seed can be emptied from the finger unit, compared to the older Deere plateless planters,” says Martin of his “best buy” Deere 7000 8-row Max-himerge planter. “ got the deluxe monitor. The wheel that counts the acres bounces a little on rough ground and it's a little short on acres counted, Only trouble had is that two seed packer wheel tires split and had to be replaced.” Martin notes that “an electronic bird chaser made by Agri Electronics” didn't work in his all-steel 5.200 sq, ft. machine shed: "T hung up 2 units and the birds sat right in front of them. My dealer checked with the company and was told they wouldn't
Gerald Wirne, Westminster, Md: Gerald Wirne, Westminister, Md.; A Deere 6600 sidehill combine heads his “best buy” list: “We'd recommend it to anyone with hilly ground. We can keep our ground speed along the hillsides and feel safe doing it, without losing the grain. We had one bearing go out and our local dealer gave us good and prompt service. The machine is a little time consuming to grease.”
Lloyd Bourne, Sprague, Wash: Lloyd Bourne, Sprague, Wa.: “Really like the tandem axle setup. Smooths out rough spots. Much easier on equipment and has plenty of clearance,” he says of his “best buy" Deere 1600 chisel plow.
Eugene Kaltenheuser, Elkhart, Iowa: Eugene Kaltenheuser, Elkhart, lowa: “Dependable, lots of power, good fuel economy and a pleasure to drive,” says Eugene of his Deere 8630 tractor.
Wilmer Kreger, Kunkletown, Pa: Wilmer Kreger, Kunkletown, Pa.: “Best designed machine to come down the road ina long while. Planting units do a very good job of plant“Best designed machine to come down the road in a long while.” ing corn at uniform depth.” says Wilmer of his Deere 7000) corn planter He's also happy with his Athens 131 disk (“Real good machine after installing dual tires") but unhappy witha‘'12in. post hole digger sold by Central Tractor. Power takeoff shaft twisted off 3 times in the process of digging 175 holes. Company finally replaced the shaft with a heavier one.”
Glen Carlson, Lena, Ill: Glen Carlson, Lena, HL: “ bought a Deere 1600 chisel plow and found it very satisfactory. There has been no clogging or bunching of crop residue, and no breakage. It operates evenly at
Sam Kingma, Lowell, Ind: Sam Kingma, Lowell, Ind.: “Why doesn't John Deere make a 20 in. Max-Emerge planter?” asks Sam. “I bought a Deere 7000 planter with the idea of redesigning it myself to a 20 in, planter but struck a snag or two that the manufacturer could have easily corrected so it would work.” Sam adds that his Deere 4240 tractor “has done all lexpected it to do. think it refutes the idea that the dealers tell us — that we need a size larger tractor and more dollar tractor”.
Dennis Faber, LaMoille, Ill: Dennis Faber, LaMoille, IL: He's well pleased with his Automatic Equipment roller mill (Model ASA600), ‘I decided on this brand of mill because of the excellent results from a previous mill which rolled several hundred thousand bushels of high moisture corn with very little downtime, The new mill is of the same type and design as the old, but does have an improved lateral discharge auger. am also impressed with the uniform cracking of corn with a minimum of fines. It's a dependable machine with simple maintenance.” Dennis adds that he’s “completely satisfied" with his Deere 4430 tractor, thanks to the dealer who Dennis commends for “promptly and courteously righting all wrongs at no charge. None of my problems were the tractor's fault. It was all due to incompetent help in manufacturing. First of all. the draft control was
Jim Hoeft, Delavan, Ill: Jim Hoeft, Delavan, Ub: “1 can't understand why a $60,000 combine has a $60 cab.” says Jim, who notes that his Deere 7700 combine “didn’t inate JUYS meet our expectations. Had numer ous small breakdowns — chains flying off, pins coming out, etc, There were numerous holes in the cab, making it dusty and dirty. Worked good after spending 3 days filling the dirt leaks." On the plus side. Jim is well pleased with his Deere 7700 Max Emerge corn planter: “I’ve always had Deere planters but never one like it. It works better than ever imagined,”’
Leslie Goeke, Newton, Wis: Leslie Goeke, Newton, Wis. who bought a replacement General Electric tractor headlight from his local International Harvester dealer for $7.88, Unfortunately, he broke it while installing it. “IT was at a local John Deere dealer and purchased the same number GE product in a Deere box for $4.35." On the plus side. Leslie nominates a Deutz 6206 tractor as one of the best buys he’s made. “Iam very pleased. It's a nice handling and easy shifting tractor. The 62 hp, makes sufficient power for a 4-row planter and a 12 ft drill, as well as on a blower.” Leslie, who also owns an 8006 Deutz tractor, says he likes the air cooled engine and the fuel savings. Leslie is one of about 40 randomly selected FARM SHOW readers who nominated “best” and “worst buys lor this issue
Don Johnson, Kingston, Ill: Don Johnson, Kingston, HL: "I recommend not buying anything over the phone when you don't know what the product is.” advises Don, who is disappointed with “Super Concentrate cleaner and degreaser made by Chemical Industry his detergent, which was supposed to do a super job in my high pressure “Bought this product from a high pressure salesman who called late one night.” cleaner, wouldn't cut grease off the tractor engine even when water was boiling hot. bought this product from a high pressure salesman who called me late in the evening when was half asleep.” On the plus side, Don nominates an Avco New Idea 708 diesel with hydrostatic drive, 717 combine and 738 corn head as his best buy. ‘Had to put a speed-up kit on the straw chopper for soybeans. I did have trouble blowing hydraulic hoses on the tractor unit, but the dealer and company have stood behind the machine 100%, lalso bought a new John Deere 4630 last fall and it's working good so far.”
Maynard Wanner, Dickinson, N. Dak: Maynard Wanner, Dickinson, N. Dak.: He notes that his Deere stack wagon is “one of the best machines I've purchased. No breakdown at all for 2 years. It works on any type of feed you want to put up — hay, straw or stover. You also can pick up chaff piles,”
Lawrence Schluter, Armstrong, Ill: Lawrence Schluter, Armstrong, IIL: He's disappointed with “the Posi-Depth gauge wheels” on his 8-row International 500 Cyclo planter. They will not work well on plowed stalk ground. Roots get wedged in between and they drag more than they turn,” Lawrence lists a 653 Deere row crop soybean header (six 30 in. rows) as one of his best buys: “This head will consistently cut lower than anything we have seen, including floating cutter bars, Also, operator comfort is outstanding, especially at night. Eliminates reel shatter and hypnosis of watching the reel, Almost impossible to get rocks in separation because the slip clutch will slip when rocks get between the gathering belts. Each row unit flexes individually so it cuts lower on uneven ground. Together with electric header control, the operator can do a better job and be relaxed." Lawrence also lists a 653 Deere row crop soybean header (six 30 in, rows) as one of his best buys: "This head
Stephen Lacina, Iowa City, Iowa: Stephen Lacina, lowa City, Iowa: “My next new tractor will be another Massey.” says Stephen, who couldn't be happier with his recently purchased MF 1155 tractor: “This tractor has a V-8 diesel engine that outlugs any tractor have owned.” Stephen would like to see some design changes on the Deere 1600 chisel plow he purchased. “The gauge wheels were mounted under the frame so that deep penetration was not possible. The dealer mounted them on the back, but then the wheels gathered mud and lifted the plow out, The plow needs a stub frame on front.”
Dwain Miller, Frankfort, Ind: Deere 7100 planter with Monitrol: “Biggest advancement in corn planting in the last 10 years” is how Dwain Miller, Frankfort, Ind., describes his Deere 7100 planter with folding wings and Monitrol for adjusting planting rate on the go. “I varied the population as much as 5.000 plants per acre on each pass through the field, according to soil type, and probably had my best corn crop ever considering weather conditions. The planter and Monitrol performed flawlessly. I received very good service from my Deere dealer.” Dwain says private brand soybean seed has been one of his worst buys. “T've tried several new brands the last few years and none of them yielded as well as Corsoy which have been planting for 10 years. The advertising claims have never held up in the field.” ‘Advertising claims have never held up in the field.”’
Dick Schmidt, Plaza, Wash: Watchdog combine monitor: “This electronic device made a believer out of me," says Dick Schmidt, Plaza, Wash. “Last summer, we traded our older Deere 6602 combine for a new one equipped with a Watchdog monitor. This combination of the 6602 and Watchdog turned out to bea team that, in many Gases, two combines couldn't match.” Dick notes that “here in the rolling hills of the Palouse Country, we raise peas, lentils, barley and wheat. Changing from one crop to another is sometimes a daily occurence, This monitor helps us do that ina matter of minutes and all on-the-go right from the operator's seat. When we're through harvesting, we slip the Watchdog monitor out of the combine and into the tractor cab. Ina matter of seconds, we're ready to start seeding with the same ‘miracle box’ monitoring performance of three grain drills." Several FARM SHOW readers reported that, in view of the tightening cost-price squeeze, they've purchased used rather than new equipment, “T found a good used cultivator and bought it for $500. I'm proud of it, reports
Leroy Bonnstetter, West Bend, Iowa: Leroy Bonnstetter, West Bend, Iowa: On the plus side, he notes that his Deere 4440 tractor ‘‘is well engineered compared to other brands and I'm pleased with its performance.’ On the negative side, he notes that ‘factory workmanship is very poor. After 54 hours, the tractor
Lowel Zentz, Etna Green, Ind: Lowel Zentz, Etna Green, Ind. “ was very well pleased with this piece of equipment,” says Lowell of his “Considering what you pay for these machines, it looks like manufacturers could do better.” Deere 6600 hydrostatic combine “The only complaint I have is that the paint job was very poor, The underside and _ hard-to-get-at places weren't painted at all. sprayed it myself before putting it into service. Not much of a gripe I guess but, considering what you pay for these machines, it looks like manufacturers could do better.”
J. B. Jurgens, Sidney, Neb: J. B. Jurgens, Sidney, Neb.: He notes that his Deere 7700 “‘is a good combine but small breakdowns have been aggravating — such things as air conditioner problems, breaking the shaft behind the platform that drives the sickle and auger, and other small incidents." Jurgens adds that he’s well pleased with the power and handling of his new Deere 8630 tractor: “It responds to load variations much better than the 7520 traded in. I'm also pleased with Deere’s program to replace all components in this tractor which have been proven to be weak points. So far, my dealer has performed over $6000 worth of update program work."
William Rowe, Bethany, Ill: William Rowe, of Bethany, III. “Farmers are being forced more and more to pay inflated prices for poorer and poorer quality equipUS E ment. We pay $60,000 to $75,000 for a combine only to be told, ‘Be sure and go over it with a set of wrenches and make sure all the bolts and nuts are tight,’ by our local dealers. We are charged exhorbitant dealer set-up charges only to find that we have to set up items like field cultivators, row crop cultivators and bean heads ourselves anyway. Manufacturers are obliged to pass on higher costs of unqualified labor and materials, but they have yet to pass on to us any type of quality along with their inflated prices, This, to me, is nothing more than a result of poor management.” Here's how Rowe sizes up new products he’s purchased recently: Steiger Panther II] 4WD tractor: lhis is the first tractor we've bought that does everything we were told it would do. The dealer is over 160 miles away and gives us No. 1 service, Unlike some of its overpriced competition, this tractor is built to do heavy work. Sure wish Steiger would build a 4WD combine.” uys Deere 7700 combine: ‘Poor parts availability and poor quality control cost us 242 days of downtime last fall. The radiator fan hub disintegrated, throwing the fan into the radiator, causing four big holes in the radiator. Due to poor parts availability, it was 2 days and a 120 mile trip to get a new fan before the combine was back together, We were not offered any kind of reimbursement for the 120 mile trip we had to make. The dealer was there when we needed him — he just didn’t have the parts.” WiL-Rich 45% ft. field cultivator: “It has done more than a satisfactory job for us. Good quality. Built heavy to do the job. Cost was about half the price of its so-called competition.” Lasso: ‘Used it on our soybeans last year and it did not work. Neither Monsanto nor our custom applicator offered any assistance.” Pickups led the parade of “best” and “worst” buys from other randomly selected FARM SHOW readers participating in this issue's buying survey. Here’s what owners like, or don't like, about their recently purchased pickups: “ar
Harold Brown, Camargo, Ill: Harold Brown, Camargo, IIL: He had both good and bad news to report in commenting on new products he's purchased recently. First the good news: He says his Deere 7100 planter gives ‘absolute precision planting depth in all types of soil. Dealer preparation and service exceptional.” The bad news: He's had some problems with his Deere 220 Flex-Head platform. “Myself and three area dealers unable to make the electric header control work in other than ideal conditions. Cutter bar too narrow to cut eight 30 in. rows if beans not standing perfectly.”
Dean Sharp, Rexburg, Idaho: Dean Sharp, Rexburg, Idaho: “Since switching to John Deere equipment, everything has been running quite smoothly,”’ says Dean, who is particularly pleased with his Deere 6600 Side Hill combine and the service received: “It performed exceptionally well. Never before has harvest time been such a joyful and relaxing experience. The combine was a dream to operate and the 200 series header performed marvelously. But aside from the praise have for the machine, I have tenfold more praise for the service we re“The only problem we encountered was due to overpaid, untrained factory workers.”’ ceived from the dealer. The only problem we encountered was due to overpaid, undertrained factory workers who forgot to install a simple lock ring in one of the final drives. It was toward evening when the problem surfaced, locking one front wheel. made a phone call that night and our dealer's servicemen were at work on our combine bright and early the following morning. Downtime was limited to only a few hours instead of a crippling day or more.” Dean notes that “other makes of machinery may perform as well or possibly even better than our John Deeres. However, from our experiences with service from other machinery dealers in the area, we
Fred Ifft, Jr., Fairbury, Ill: Fred Ifft, Jr., Fairbury, IIL: He nominates a Century heavy duty arc welder with high frequency arc stabilizer as a ‘‘best buy”: I farm 750 acres with a brother-in-law and have a farm shop. lalso make bean walking machines in the off-season. This new welder has infinite amperage control and 250 amps DC for using the low hydrogen rods to weld the harder steel used in the newer machines. Another feature is the force cutting tap which enables gouging metal that is broken or cracked and then welding without disassembling from the machine, found the welder to do everything it is supposed to do.” Fred is disappointed with “an Aldens 10x10 ft. storage building. The metal is so thin that my finger dented it just to pick up the panels when was trying to assemble it.” Other purchases on his “best buy” list include a 62 ft. Hutchison 8 in, grain auger, on which he mounted a hydraulic motor on the winch assembly to raise and lower the auger without getting off the tractor, a Deere 150 tractor loader and a Dietrich 300 bu. side-unload wagon with rear wheel surge brakes: “This wagon trails real well and is made with heavy gauge metal throughout. We left our 300 bu. Gooseneck trailer set last fall and used the 4WD pickup to pull the Dietrich wagon."
Don Dann, Ulysses, Kan: Don Dann, Ulysses, Kan.: A Bish header adapter kit he read about in FARM SHOW was his “best buy” nomination: “The Bish head changer, which allowed us to use an 8-row Deere corn head on our L Gleaner combine, worked great. We're in a Southwestern corn borer area and have to handle corn that is from 30 to 90% lodged. The Deere header does a superior job of gathering the crop.”
Howard Johnson, Vermillion, S.D: Howard Johnson, Vermillion, S.D.: “My most satisfying buying experience is with a John Deere dealer. I was plowing last spring when all of a sudden I started blowing engine gaskets. thought for sure I'd have to get the tractor hauled into a mechanic. Drove up to Pederson Machine, the Deere dealer in Bereslord, and talked to the head mechanic. Told him the problem and he sent me to the parts man to get a lead plug for the engine block that cost about $3.00. Went home and put it in the way the mechanic told me. Never had any more trouble. really appreciated what he did. He saved me a lot of time and the expense of not having the tractor hauled in. He took time out to talk to me and didn't charge a thing for his advice. didn't even know him. If have more trouble, know where I'll go for advice and repairs."
Gilbert Livingood, Postville, Iowa: Gilbert Livingood, Postville, lowa: “If it wasn't for the good service from the local dealer, we would have traded long ago,” he reports in citing problems he had initially with a Chevrolet Scottsdale 20 %4 ton pickup. “It's still under warranty, We have had repair work done on the lights. brakes. fan, power steering, and air conditioning belt and pulley. rhe largest problem was with the motor missing. After about 10 trips for new plugs, points, distributor, wiring harness, etc.. a Chevrolet company man put insulation between the carburetor and distributor and solved that problem. My son has a pickup just like it and has had no problems,” Gilbert notes that his “best buy" is a Deere 6600 Side Hill combine! “It increased our picking capacity at least 100% over the old 6600 on our terraced land. It could use more horsepower, however, especially when it’s muddy.”
John Farrell, Scottsville, N.Y: John Farrell, Scottsville, N.Y.: He had two flat tires on his new Deere 7000 corn planter last spring after planting only 8 acres of corn. “Rocks were getting in between the planting unit gauge wheels and the planter tires, ripping the valve stems out.” he told FARM SHOW. “The next day when I went to my dealer to have the tires fixed, there were two factory men there to talk to. Of course, they had never heard of the problem before. tried $76.00 worth of dirt shields on the planter, After that the planter worked perfectly with no problems at all." Thanks to a concerned dealer who ended up making a missing part himself, Keith Oldewurtel, Slayton, Minn., had his new grain bins ready for harvest last fall: “lordered 3 big MFS hopper-bottom bins in June, which they considered an_ early order. Everything came through early enough, except some braces that had to be on as soon as the bins went up. Every time the dealer would call the factory for the braces, they would tell him that they would definitely be shipped next week. The dealer finally had to make the braces himself in order to get the bins up in late October.” New products they first read about in FARM SHOW were “best buy” nominations from several readers participating in this issue's buying survey Combine header adapter kit: “The Bish adapter made the hookup very easy,” reports
Ray Berlekamp, Green Springs, Ohio: Ray Berlekamp, Green Springs, Ohio, who purchased the kil which was featured in FARM SHOW a year ago. Invented and manufac tured by Harvey Bish. Giltner, Neb.. it adapts Deere's popular bean headers to other makes of combines. Ray used it to adapt a Deere 453 row-crop bean head to his 815 LH combine. “It did a very good job cutting the beans low and picking up lodged beans, There was very little shatter loss and I could go both directions on lodged beans,” he reports. Ray adds that he had to do some redesigning to correct problems he experienced with a Lilliston Tillager: ‘It was supposed to work in corn stalks but failed to do a satisfactory job. There was a constant plugging problem, making a mess of the fields. The tool was misrepresented to me and improperly set up, leaving some redesigning to be done in the field.” Lubbock vibrating plow: First featured in FARM SHOW a yearago, this new tillage tool from Lubbock Manufacturing, Lubbock, Texas, was a “best buy" nomination from
Terence Blanchett, Porter, Minn: Terence Blanchett, Porter, Minn., who nominated FARM SHOW as one of his “best buys”. “I've found out many things of interest that would otherwise have never known about." Terence also listed a Deere 8350 end wheel drill as a ‘best’ buy: “'l bought this drill in the fall and seeded winter wheat, Was very pleased with the uniform depth and seed placement even at high speed,” says Terence. On the negative side, he notes that “in the last two seasons I've planted five fields of Dekalb’s NukKote alfalfa. None of the fields had, or have, a stand of alfalfa worth keeping. have had much better success with Thor brand seed". “I told the dealer it must have been made on Monday after a_ bad weekend,” says Neal Banta, Washington, Ind., who notes that his Gleaner “F" combine is operating fine, despite a troublesome start: “It
Joe Elpers, Evansville, Ind: Joe Elpers, Evansville, Ind., figures improper placement of — fertilizer disks on his new Deere Max-imerge planter cost him “at least 6,000 to 8,000 bu. of corn” this year. “The dealer placed the disks exactly in front of the planting disks. questioned him two times about this placement and he said it was the way farmers are doing it now. His placement of the disks made it impossible for the Max-Emerge unit to plant at a uniform depth. The dealer, and aman from Deere, do not feel it was any fault of theirs even though [ twice questioned the dealer and his foreman about placement of the disks before planting.” Several companies earned both “brickbats and bouquets" from. recent purchasers of their products: These companies included; New Holland: On the plus side,
David A. Hudnall, Heathsville, Va: David A. Hudnall, Heathsville, Va.: He's disappointed with initial performance of his new pickup — a 1977 Chevrolet C-20 with 454 motor: “After got it, there seemed to be a small knock in the motor. After 2,500 miles, the dealer pulled the motor down and discovered a cracked piston. The truck is doing good now, but I hate to pay $7,500 for something and then have it pulled apart.” David says the best two new products he's purchased recently “are both John Deere planters. We purchased a 7000 Max-Emerge that did a
Alan Wienke, Macon, Miss: Alan Wienke, Macon, Miss. He adds that his Graham-Hoeme chisel plow is ‘“‘sturdily built, and has sturdy shanks and springs heavy enough for Mibssissippi’s heavy soil,” John Deere 7700 combine: ‘This new combine is turbo charged with hydrostatic 4-wheel drive and can run a gear higher than my previous 7700 diesel. Unbelieveable the mud you can go through with the rear wheel drive. Back wheels will throw mud higher than the combine.”
Curtis Pflum, Burlington, Iowa: Curtis Pflum, Burlington, lowa. “Bought this Deere 7700 in partnership with my brother. The combine, teamed up with the Deere row crop header we got with it, does best job possible to do in soybeans. Also, the dealer has done satisfactory job of taking care of any malfunction.”
Wesley Knoles, Mason City, Ill: Wesley Knoles, Mason City, IIL: His “best buy” nomination is a 1977 Ford F150 XLT pickup with a topper: “I'm very pleased with the unit. It drives, rides and performs excellent.” Chevrolet % ton “10” Silverado pickup: “Drives and rides like a car. My daughter would rather drive it than our car which is a 1976 Oldsmobile, The cab is really air tight. Good, solid built. Very pleased,” reports a Minnesota FARM SHOW reader, Here are other “best” and ‘‘worst" buys nominated by — randomlyselected FARM SHOW readers from throughout the U.S.: New Holland TR 70 combine: “Great in corn and soybeans — no grain was cracked, grain losses in the field were down, less dockage at the elevator. Cab was nice and quiet, lots of room and controls easy to get to. Nice big grain tank. The 3208 Cat. motor performs real well. Good combine. Like it real well." Alan Wienke, Macon, Miss. He adds that his Graham-Hoeme chisel plow is ‘“‘sturdily built, and has sturdy shanks and springs heavy enough for Mibssissippi’s heavy soil,” John Deere 7700 combine: ‘This new combine is turbo charged with hydrostatic 4-wheel drive and can run a gear higher than my previous 7700 diesel. Unbelieveable the mud you can go through with the rear wheel drive. Back wheels will throw mud higher than the combine.”
Ronald Whitlock, Carrollton, Ill: Ronald Whitlock, Carrollton, Ul., says his Deere 4230 diesel tractor, purchased new in ‘74, “has a good motor, transmission and final drives but it has the worst hydraulics I've ever seen, It's been in our dealer's shop about five months out of the last three years just for hydraulic trouble. And it’s. still not right,’ reports Ronald, who adds that his new Deere 7000 planter (8 30-in rows) is “the best corn planter I've ever seen. We got a beautiful stand of corn with it this year, The soybean metering units leave a lot to be desired, however. They are not very accurate. Too much guesswork and scratching and digging.” Here's how other randomly selected readers size up their recent tractor purchases:
Earl Youngblut, LaPorte City, Iowa: Earl Youngblut, LaPorte City, Iowa: He's happy with his 8630 Deere tractor (“performance has been very good to this point; costs are high but dealer service and warranty very good") but faults Deere for a series of problems with a newly-purchased, 1977 model 7700 combine: “In less than one hour field time, it lost all the hydraulic oil, Very disappointing. Wiring is still poor. Seat still needs improving in regards to leg rest height and accessibility to service the area below.” Albert Meyer, Jr., Gaylord, Minn.: “It has given good performance and has a very good cab and is easy to service,’ says Albert of his “best buy" Deere 8630 tractor, purchased in 1975. “I bought it from a dealer that gives good service and from a company that stands behind their products.” He thinks his IH 700 plow (nine 18-in bottoms) “could have some improvements to it. The land wheel should be in a better place to give the plow better stability. If] were to buya new plow, I'd get the 800 flex frame plow instead."
Clayton Berg, Hendrum, Minn: Clayton Berg, Hendrum, Minn.: ‘' got a new 8430 John Deere. It does everything planned for it to do. The Fargo Implement, Fargo, N. Dak., gives the best service for parts and repairs. have been very satisfied with them,” An Illinois reader reports that in the past 12 months he has purchased “a used IHC 966 diesel tractor, used New Holland 469 Haybine and a new LHC 480 disc: No problems. Everything and everyone performed as expected.” Another reader cites his Big Bud tractor, from Northern Mfg., Havre, Mont., as his “best” buy: "A quality made tractor with very good service.” A Wisconsin reader who didn't sign his name nominated a White 2105 tract’ * as his “best” buy. As in previous FARM SHOW buying surveys, sloppy workmanship at the factory was a frequently mentioned complaint. “The workmanship was lousy,” says Louis Herdegen, Birdtail Ranch, Chinook, Mont., of his 1855 White tractor which he purchased new. “It was only half put together and was nothing but one big pain.” Louis is well pleased with two Ban-A-F ly electronic f'y control units from the Schlueter Co.: “Have two in the farrowing house and they really are flashing and popping all the time. They surely seem to be doing their jobs of getting rid of flies."
Norman Trost, Ronan, Mont: Norman Trost, Ronan, Mont: ‘He reports “excellent results” with his New Holland hydrostatic — selfpropelled model 1112 swather: “The twin sickles allow me to cut much faster than my previous single sickle machine. The cab is comfortable, dust free and quiet with the exception of the hydrostatic whine."’ Norman is disappointed with his Deere baler model 466: ‘Since I’ve had it, the main pitman and shaft have had to be replaced. The cluster gear popped a tooth, allowing it to go out of time which broke both needles and split one knotter in half. The needle lift frame has had to be taken off and straightened, and several sealed bearings have gone out already.”
Patrick Birgen, Alcester, S. Dak: Patrick Birgen, Alcester, S. Dak.: “It took one year to the day when it ran right,” says Patrick of his Deere 200 Stackwagon. "The thing was supposed to be new, but the way it ran and the service we got was terrible. Everything that went wrong, almost, was blamed by the company on the person who was running it."’ Patrick is well pleased with products and services from the Murphy Feed Co. “I tried their product several years ago and it is astounding the way they have progressed according to other companies. The service is also out of this world," says Patrick.
Ron Spencer, Claremont, S. Dak: Ron Spencer, Claremont, S.Dak. We sent Ron and other randomly selected readers throughout the U.S, a survey questionnaire, asking them to “tell it like it is’ in nominating their ‘best’ and “worst" buys in the last 12 months or so. This special report is based on the responses we had received as this issue went to press. In addition to FARM SHOW, Ron who admits to being “strictly a John Deere man" — nominated a 1070 Case tractor as one of his “best” buys. ‘The reason bought the Case is that there weren't any John Deeres to purchase at the time, The Case is a very good tractor in regards to the cab and operating controls. The cab is very clean and quiet, and the air conditioning system is great. The tractor is easy to service and adjust,”” explains Ron, who also cited a few features he doesn’t like: **The rear wheels are a headache to change to different widths and the hydraulic system is difficult to hook up,” As in previous surveys, the importance of buying from a dependable dealer came through loud and clear: “It's been longer than 12 months inate sUYS but the lemon taste lingers on,” laments
Clifford Kuskie, Nebraska: Clifford Kuskie. of Brule, blames improper installation of air motors for his dis-satisfaction with an 8-row Allis Chalmers air planter: “The AC fieldman told me the air motors were running too slow, Real cause was the dealer who had “As long as a company treats me this way I see no reason to change brands. only installed three air motors instead of four. The planting was very uneven and hard to keep ata uniform depth. Air could not hold the seed in the holes of the plate. Skips and doubles were common. Installing one air blower per two rows did help some,” reports Clifford, who ended up trading it for a 7100 Deere planter which, he says. “did an excellent job". Here’s how other farmers who nominated new corn planters size them up:
R. L. Hargroves, Melvin, Texas: R. L. Hargroves, Melvin, Texas. He notes that his Deere 4430 tractor was giving good service when the final drive went out after 3 years and 2700 hours. ‘Deere and Co, extended the warranty,” says Hargroves, who also lists a Deere 7700 combine as a ‘best’ buy: “The machine has had some problems but they've been corrected eagerly by dealers, The new 224 platform does everything the company says it will, and more. This machine is the best one out of five 7700's I've purchased since 1971." In Nebraska,
Buckey Jones, Smithdale, Miss: Buckey Jones, Smithdale, Miss.: “Deere's Max-Emerge planter (7100) is by far the best planter that I have ever used. Every seed is planted at a uniform depth and rate, insuring a perfect stand every time.” He's disappointed with his Deere 8200 grain drill: “This grain drill will not plant ata uniform depth, nor will the rate of seed planted remain constant. It is impossible to get both sides of the drill to plant at the same rate.”
William Williams, Eddyville, Ky: William Williams, Eddyville, Kty.: He reports that ‘“Deere's new no-till attachment for their 7000 planter is the best no-till I've seen."’ Other “best buys" he's made include a Deere 4230 tractor with quadrange transmission (‘‘we've been extremely salisfied with the tractor's performance and especially the way the transmission works") and a Sidewinder rotary cutter (15 ft., fold-up type.
Shirley Haney, Athens, Ala: Shirley Haney, Athens, Ala.: He lists a “best buy” tillage tool (an TH 490 disk) and a tractor — a 4630 Deere with cab and air conditioning which, he says, is “great on hot, dusty days. The disk has 7% in. spacing front and rear, and floating wings that flex when disking around terraces. It's a real good finishing disk.”
Elmer Heath, Anderson, Ind: Elmer Heath, Anderson, Ind., likes his ‘best buy" —a six row 7000 Deere planter — for these reasons: ‘‘No down time, very few repairs, and its placement of seed and emergence.” He faults his recently-purchased Deere model 2500 7-bottom plow (18 in.) for ‘not operating like it should. The front furrow wheel will not guide as it's supposed to; have had lots of repair on it for a new plow.” He also hopes to have ‘‘better luck this year’ with a Krause 35 ft. field cultivator which he points out, “would break on hitch braces and several welds on the wings. didn't get 500 acres with it the first year. They’ve sent me tongue braces and reinforced the tongue. Also sent new wing frames.” “I'm well pleased,” says Raymond Blanchard, Jr., Turkey, N.C., about his Deere model 7000 planter. ‘‘It does a real good job planting in all types and conditions of soil. I like the disc opener rather than the sword type opener because it isn't affected by trash as easily. The planter seems to be maintained and cared for more easily than my previous planter.” Several farmers nominated new tractors as their ‘‘best buy’:
Raymond Blanchard, Jr., Turkey, N.C.: says Raymond Blanchard, Jr., Turkey, N.C., about his Deere model 7000 planter. ‘‘It does a real good job planting in all types and conditions of soil. I like the disc opener rather than the sword type opener because it isn't affected by trash as easily. The planter seems to be maintained and cared for more easily than my previous planter.” Several farmers nominated new tractors as their ‘‘best buy’:
Robert Bennett, Meigs, Ga: Robert Bennett, Meigs, Ga., likes his 4430 John Deere because “it's quiet, dependable and powerful. This is my first John Deere tractor.” He faults his 8600 and 9600 Ford tractors for being noisy, and the 9600 for clutch problems.
Robert Hales, Clinton, Ky: Robert Hales, Clinton, Kty. He's been “IT expected to be disappointed and I was.” disappointed, however, with the bracing on a Deere 8200 grain drill: “Put together very weak, Had to have welding and extra braces put on it after one day of use."
Clarence Wichhart, Otley, Iowa: Clarence Wichhart, Otley, lowa. His “homework” paid off in the purchase of a Deere 6600 sidehill combine: “I like the sidehill feature because, when you're harvesting on sloping land, the machine is always level. You don’t lose grain out the back of the machine. Saving 2 or 3 bu. or more grain per acre is money in the bank. Also, you don’t have to slow down on hills so you save time as well as money.” An lowa farmer is “sold” on his new Deere 654 soybean header: ‘‘Reduces shatter, and you don't have to worry about rocks as much. It's easy to operate and you can travel so much faster.”’
Francis J. Zimmerman, Waseca, Minn: Francis J. Zimmerman, Waseca, Mn. He also owns a Deere 350 sprayer: “It has hydraulic-fold beams which the dealer never did get to work. It also has a hydraulic-driven pump which blew up every time we shut off the hydraulic system on the tractor. The pressure gauge operates on oil inside a diaphragm which makes it inaccurate most of the time.” Germania automatic take off units for milking machines; “Had 16 units installed in December of 1976. They've been working without any problem and have done a great job for me. They reduced the amount of labor to milk 375 cows almost in half — and I believe that we're doing a better job."
Richard Call, Batavia, N.Y: Richard Call, Batavia, N.Y. Deere 650 side delivery rake: “Several years ago, bought an older model at a farm auction. It finally wore out so last spring I bought the new 650 model. It's bigger, stronger and greaseless, have some steep sidehills and it will stay up on them real well while raking. Turning on ends is no problem — just pick it up
Ernest Ellis, Hillsboro, Ind: Ernest Ellis, Hillsboro, Ind. He’s been disappointed with a set of Goodyear steel belted radial tires he bought: ‘These tires were supposed to be 40,000 mile tires. Today, after only 21,000 miles, all 5 have been replaced.” 200 Deere stack wagon and mover: “My 200 stack wagon operates just like it's supposed to, The first stack I made looked just like the picture in the operator's manual. had a couple of parts go bad but my JD dealer took care of them on the warranty. Before using my stack mover, wondered how you can get those big stacks up on it, It amazes me each time use it how simple and well it works. I am well pleased with both machines. During the winter of 1977, with the high winds and blizzards, none of the stack tops were blown off. I am surprised they stood the way they did.”
Roy Embry, Eatonton, Ga: Roy Embry, Eatonton, Ga. He also passes along this “‘message’’ to the manufacturer of his Bou-Matic vacuum pump: ‘These vaccum pumps run too fast if they are set up to produce 100 CEM vacuum, The bearings go out at least twice a year, and the vanes wear out too quick, causing them to pump less vaccum, causing related problems such as slow milking, etc." Guy Roots custom silo filling operation: ‘When it's possible to get this kind of service in the fall, when our herd is demanding more of our attention, we can't afford to take our equipment out of the shed, However, we do find it advantageous to use our John Deere blower powered by a 60 hp electric motor at the silo,” says an Ohio farmer, who pays $35 to $40 per hour for hiring silage custom chopped with a 2-row New Holland chopper and 3 wagons. Deere 1640 disc harrow: “Summer drought slowed down corn maturity and forced a late harvest in'76. Fierce winter kept us from doing much plowing. Result: 200 acres of unplowed red clay land this spring. Our soil can turn into a brick pile when spring plowed. The 1640 harrow penetrates dry clay too hard to plow and makes 25-30 acres of beautiful seedbed per working day. Look forward to using it behind small grain harvest to get corn in quick.’ Frank Walker, Orange, Virg. Bimco pickup hitch: “It'll pull my 6 x 16 stock trailer without twisting and raising up in front.’’
Charles Schlabs, Hereford, Texas: Charles Schlabs, Hereford, Texas, can testify: Buying a poorly designed and engineered beet harvester resulted in “50 to 75% down time every day, and loss of $20,000 worth of crop. We used it one year and retired it. No one wanted it in trade."’ Schlabs replaced it with a John Deere “Fuel consumption is far better than I expected.” 4310 beet harvester which has performed with flying colors: “It has about twice the capacity of any other harvester, including the 1974 Deere 4300. Works very well in muddy conditions.” Just about every farmer who nominated a new tractor as his “best buy” cited fuel economy as one of the key reasons: “Fuel economy is great and dealer service the best,"’ says Fritz Beissel, Hampton, Minn., of his 1976 model 1155 Massey Ferguson tractor. ‘Of all the tractors I’ve ever owned, this one is the most for the money."
Kenneth Crandall, Sterling, Colo: Kenneth Crandall, equipment manager for E.E. Sonnenberg and Sons, Sterling, Colo. On the negative side, he faulted Fairbanks Morse solid state magnetos which come on Caterpillar G333 natural gas “They said it was one of the best balers they had seen.” irrigation engines.’ Crandall says the units ‘twill only run two to three weeks, We've replaced them with better, less expensive and less complicated magnetos.”’ 642 Ford combine — “‘It’s well designed and I'm very well satisfied,” says Wilburn Lundlum, Jr., Moran, Kan. Several respondents who nominated ‘best’ buys didn’t want their names used. Their nominations included: New Holland 850 big baler: ‘1 do custom work and everyone I baled for had me back to do more, and they said it was one of the best balers they had seen.” Century trailer type field sprayer: “We have a 400 gal. tank mounted on it with a built-in agitation system. It’s also equipped with a centrifugal pump for high volume spraying. The pump is mounted right on the sprayer with a power shaft to the tractor, which makes for fast, easy hookup.” John Deere 4430 diesel tractor: “Excellent tractor, The cab is very _ satisfactory. Easy to steer and great hydraulic system.” Nachurs plant food; “My experience has been super. The soil testing service that goes with it is the best I've seen,” I-l-Apz @
John Deere 4020 diesel
62 Best Buys3 Worst Buys“I don’t have anything to report on new purchases, but I have something from when I was growing up on a small family farm in Iowa. In the 1960s, my dad farmed with his main tractor, a Farmall Super M. That tractor had guts. We used it to plow on the farm. We had clay in the dirt, and we pulled a 3/14 plow. The tractor would go up hills with the plow turning over that clay and never complained.
“Then we traded it in for a new 656 gas tractor. The ‘new kid on the block’ couldn’t keep up with the old Super M. I think Dad regretted that purchase after he made it. A few years later, he decided the 656 needed to go, and we got a new Deere 4020 diesel. I thought I died and went to heaven. When you got up on the 4020, it was huge and a great tractor. However, I wished we still had the old Super M. She was a working fool.”
“My best buys are my 1968 and 1969 Deere 4020 tractors. This model is the most reliable tractor ever made by Deere—no computer. There are still many being used. If Deere made a new 4020, the line to buy them would be 10 miles long.”
“My 1967 Deere 4020 has been a best buy. Changing filters and overall service is easy.”
“I’ve had a few standout best buys in my 85 years. I used my 1969 Deere 4020 diesel for 46 years. It never needed motor work; only a clutch and the hydraulic pump fixed.
“My 1955 Ford 860 was used for 60 years with no major problems. It was a safe tractor for my wife and daughters to operate. It had standing room for passengers and was easy to get on and off.
“Finally, my 1999 Chevy S-10 had no major problems in 21 years. With care, it pulled 100-bushel gravity boxes to town.”
“My John Deere 4020 bought in October 1970 is still running strong.”
“My 1968 Deere 4020 diesel tractor, which I use with a 5-bottom semi-mounted plow, is worth more now than what I paid for it new.”
On the negative side, “Harbor Freight 4 1/2-in. angle grinders bend easily. There’s no bearing for the upper end of the wheel shaft, which causes the shaft to wear out prematurely.
“I was only able to use my Harbor Freight high lift jack once before the handle on it bent where it’s welded to the frame, making the jack unusable. Rural King makes a better and stronger jack (ph 800 561-1752; www.ruralking.com).
“My 1967 Deere 4020 equipped with a Powershift transmission is still dependable.”
“The 1968 Deere 4020 diesel tractor I bought used in 1980 has been trouble-free.”
“I would like to nominate FARM SHOW as our best buy. The ideas we have gathered over the years have saved us thousands of dollars and we’ve purchased products that we’ve never seen anywhere else. We really look forward to every issue.
“Our other best buy is our Deere 4020 diesel tractor which now has 34,197 hrs. on it. This tractor, which was previously featured in FARM SHOW, and still works every day. It runs like new and still has the original Roosa Master injection pump.
“Our Deere 8400 is also a great tractor with good visibility, plenty of power, and is a pleasure to operate. In more than 12,500 hrs. of operation, we have spent less than $8,000 on repairs.
“Finally, our Deere 332 skid steer is amazing. With 14,632 hrs. of operation, it has had no repairs to the engine. We test a used oil sample every year and it always shows absolutely no engine wear.”
“Back in 1968 my dad and I bought a Deere 4020 tractor equipped with a power shift transmission, and it’s still going strong with no major problems. Since then we bought a new Deere 6150 and while it’s a nice tractor and has more power, it’s still not a 4020. It doesn’t weigh as much as the 4020 so I added more than 1,000 lbs. per wheel, and it could still use more.”
“I bought my 1968 Deere 4020 new after coming home from the Army and over the years it has been a good tractor. I added a cab and larger front and rear tires for better flotation and traction. The engine, transmission and rear end have not been touched.”
“My 1969 Deere 4020 diesel tractor has about 9,300 hrs. on it but has required only normal maintenance and repairs. It has never been overhauled. When I bought it my dad thought I didn’t need to buy such a big tractor. However, later on he told me I had made a good choice and he borrowed it frequently.”
“I advertised for a late model used Deere 4020 tractor in good condition and ended up buying one that was made in 1972 and has a cab. One owner, with about 6,700 hours on it. Very nice.”
“The original hour meter on our 1970 Deere 4020 diesel tractor recorded 24,274 hrs. before it quit working. The tractor now has more than 32,000 hrs. on it, but after the original meter quit working we’ve had to install 3 different ones. The most recent meter lasted only 1,900 hrs. The original meter was made in the U.S.; the replacements were made in other countries.”
“In 1968 I bought a new Deere 4020 diesel tractor which worked great. We had a lot of ground to cover so the following year I bought another 4020. We used both tractors to pull 5-bottom plows. My son drove the 1968 model and I drove the 1969 model. His tractor outpulled mine in good dirt, but in heavy ground he had to drop down a gear so I took the lead.
“We finally found out why there was a difference in speed when we compared the 2 tractors gear for gear on the road. The difference was in the rear tire size - the 1969 model had slightly bigger tires which caused it to go faster. I still use both tractors and enjoy them.”
“The battery on my Deere 4020 gas tractor was always low so I had trouble starting the tractor. To solve the problem, I replaced the generator with an alternator and put an LP starter on it with electronic ignition. Now the tractor always starts right up.”
“I can’t justify spending the money on new tractors, but I’ll buy any reasonably priced used Deere 4020 to use on our 300-acre U-pick vegetable farm. I fix up the best ones and part out the worst. I think the 4020 is the best tractor Deere ever made.”
“In 1980 I bought a used Deere 4020 tractor with about 8,600 hrs. on it, and now it has more than 14,000 hrs. It’s a great tractor.”
“Our 2009 Kioti 30 hp, 4-WD utility loader tractor makes it a joy to do chores around our vegetable farm. We use it as a road grader, forklift, row tractor, front-end loader, a power source for splitting logs, raking hay and pulling wagons. It always starts right up and is easy on fuel and oil. Its all metal body construction makes it a good successor to our Mahindra 35 and an excellent companion to another bullet-proof tractor, our Deere 4020.”
“My all-time best buy is the 1938 Deere 10-in. hammer mill that my dad bought used several years ago for $30. It’s our Saturday ritual to grind enough feed for two small herds of beef cattle. Currently, we’re feeding 56 5-gal. buckets of feed each week using ground hay, corn, cottonseed meal, cottonseed hulls, and trace minerals. The hammer mill is pto-operated by a 1955 Deere 60 tractor, which is also a best buy. The hammer mill was manufactured the same year my dad was born. The last time we checked, genuine Deere parts were still available for the hammer mill. Dad replaced the hammers with disc blades off a disc mower because they were much less expensive. That’s the only modification we’ve made to the machine. It would be impressive to see the pile of feed that has come out of this mill over the past 20 years or so.
“Our 1964 propane-powered Deere 4020 tractor and 1965 diesel-powered Deere 4020 tractor, which we use in our hay operation, are both best buys. I think the 4020 is the best all-around tractor ever made.”
“Two years ago I bought a used 2001 Chevrolet 1/2-ton 4-WD pickup with about 198,000 miles on it from a local public works department. I drive this pickup on the road every day. It does a great job pulling trailers and is reasonably fuel efficient. No problems. I really like the tow/haul feature on the transmission.
“About eight months ago I bought a 1964 Deere 4020 tractor. I wish I had left the tractor where I found it. It ran good at the auction sale, but when I got it home it ran poorly. I put new spark plugs in, but it still runs poorly and it drinks gas like a fish. On the plus side, I really like the tractor’s powershift transmission.”
Gary owns three Deere 4020 diesel tractors and says they’re all “best buys”. His 1966 and 1969 models are equipped with syncromesh transmissions, while his 1970 model has a powershift transmission. “They’re the most complete tractors in every way. I use them to do light-to-heavy work and refer to them as icons. The three tractors have about 16,000 hours between them, with no problems that I couldn’t fix by myself. There’s not a tractor out there that will resell like these models. When new they sold for $7,000 to $8,000, but I can get $15,000 to $20,000 for them today.
“My 1968 Deere 6600 combine equipped with a diesel engine is still the sharpest combine in our area. It’s equipped with a 329 cu. in. diesel engine that’s easy on fuel. I painted the combine to like-new condition in 2007 and applied chip guard over some painted spots to keep the paint from wearing off. The combine is equipped with a 213 flex head and a 4-row corn head that’s set for 38-in. rows. They don’t build combines like this any more, and I like being able to do any repair work that needs to be done. No computers on this machine.”
Lawrence nominates his 1965 Deere 4020 tractor as his “best buy”. “I’ve never had a wrench on the engine nor has it ever been overhauled. A couple of fuel injectors were replaced. It has 5,980 hours on it but still runs good.”
“No problems with our 2007 Ford Fusion car. It’s comfortable and fuel efficient.
“My 1969 Deere 4020 diesel tractor is a best buy. It was our main tractor for 30 years while we were farming 200 to 300 acres of row and field crops. It was always dependable and required minimal maintenance, and it was also fuel efficient.
“Many newer products aren’t built with the same quality as 25 to 30 years ago. I fix most everything myself, but it’s hard to find parts for these newer products. And when you do, they’re expensive.”
“My 1971 Deere 4020 diesel tractor works great and has required only minimal repairs. It’s ready to go to work whenever I need it.”
“We use our Case 8850 swather to cut about 2,500 acres of hay per year and have had very few problems. It has about 3,200 hours on it, so we’re now starting to have a little trouble with the header.
“Our 1968 Deere 4020 tractor, which we bought used, is a best buy. We’ve had a frontend loader on it since 1974 and have used it to handle 1-ton bales all this time. The engine has about 9,100 hours.
“We have two International Harvester 1466 tractors, one 2-WD and one 4-WD, that together have 16,700 hours on them. They’ve done a lot of work but we’ve had to do quite a bit of repair work on them.”
“My 1968 Deere 4020 tractor equipped with a diesel engine and powershift transmission is by far my best buy. This tractor starts right up in cold weather with no ether and no glow plug. It runs great.”
“My 1964 Deere 4020 tractor has 15,500 hours on it but still runs like new. The engine was overhauled at 7,200 hours. I’ve had newer and older Deere tractors and all of them have worked great, but this one is special. It still gets the most use of any of my tractors.”
“My 1969 Deere 4020 tractor had a new engine and new paint when I bought it used about two years ago to plow up 40-year-old fescue sod. It starts easy even in cold weather and has a lot of power and traction. I don’t plan to ever part with it.”
“My 1972 Deere 4020 equipped with a wide front axle is a pleasant tractor to drive. It was the last year these tractors were built. It’s equipped with a powershift transmission and 95 hp diesel engine. It also has dual remote hydraulic outlets, a quick hitch, and hydraulic power brakes.”
“Our 1968 Deere 4020 tractor, which we bought used, is a best buy. We’ve had a front-end loader on it since 1974. We’ve used it to handle 1-ton bales all this time. The engine was overhauled at 8,900 hours.
“Our Case 1290 tractor, which we bought in 1986, has more than 10,000 hours on it yet the engine has never been overhauled. It’s a best buy. Our only problem was that the right final drive went out about 12 years ago.
“Our Case 8850 swather has about 2,800 hours on it. We use it to cut about 250 acres of hay per year with hardly any major breakdowns. We’ve custom cut a lot of acres with it.”
“My 1972 Deere 4020 tractor has more than 7,000 hours on it with no problems.
“My Reese mower is well engineered and cuts heavy hay, but the welding on it is bad. We almost need to keep a welder in the field every time we used it. We’ve repaired just about all the welds.”
“My 1999 Deere 925 mower conditioner is my best buy. I especially like the flail conditioner, which can pass objects through without damaging the machine. This machine just mows and mows without problems. It has held up well over thousands of acres.
“My 1966 Deere 4020 tractor is a best buy. It rarely has problems and is worth exactly what I paid for it six years ago.
“My 1999 Deere 6310 tractor is comfortable, quiet, and does a good job of handling our mower and round baler. The power quad transmission lets us work fast in the field. It lets me mow our field 30 minutes quicker than with my 4020, just because of its ability to easily and constantly change gears.
“My 2003 Vermeer 605XL baler makes a good bale and the pickup gets all the hay. However, it has had a lot of problems.
“My 2004 Vermeer WRX rake does a good job and is easy to adjust. However, it’s four real tires, a good paint job, and some better-grade bolts away from being a best buy.
“My Deere 1600 hydraswing mower conditioner never made it through a field without breaking down. The final blow came when we couldn’t get it unhooked from the tractor’s pto shaft, and we ended up having to take the pto shaft out of the tractor.”
“In 1965 I bought a new Deere 4020 tractor and it’s my best buy. I replaced the engine 20 years ago, but the rear end, transmission, and hydraulic pump have never been touched. Otherwise it has required only routine maintenance and replacement of belts, alternators, tires and batteries. Nowadays I use it mainly for loader work.”
“I own an outstanding 1966 Deere 4020 tractor that runs on LP gas. It has more than 13,000 hours on it but the transmission has never been repaired nor have I ever had to do anything to the hydraulics. The engine has been overhauled three times. The only problem is the main bearings are a little weak. They’re the same bearings used in the gas engine that comes with this tractor. The bearings should have been bigger, because LP gas results in higher compression.”
“My 1965 Deere 4020 tractor is my best buy. It had problems with the ignition starter, hydraulics, and radiator. Overall, though, it’s my favorite workhorse for work on hills and for hauling big bales. I wish the accelerator shifter wasn’t located between the dash and the steering wheel. It can be scary if you accidentally bump it while driving on hillsides. Sometimes the tractor dies and then the brakes and power steering quit working.”
“It’s a good and faithful tractor,” says Dorothy about her Deere 4020. “We also have a Deere 3020 as well as two International Harvesters. However, we like the 4020 best for general farming. The 3020 works best for feeding cattle but I wish it was easier for older people to get on and off.”
Gerald says his 1964 and 1969 Deere 4020 tractors are both “best buys”, as well as his 1962 Deere 3020. They’re all equipped with power shift transmissions. “When my children were home they helped with field work, fencing, rock picking, and feeding bales to cattle. I had to change the 24-volt system and harness on the 3020 because the generator was inadequate. An alternator has more output. We also put in a 12-volt starter.”
“I haven’t had any problems with my Vermeer 504 round baler or my Krone disc mower.
“My Deere 6400 tractor is powered by a 4-cyl. engine that’s very powerful. This tractor has 1,500 hours on it with no problems.
“The engine on my Deere 4020 tractor has about 9,000 hours on it but has never been overhauled. It’s a great loader tractor.
“My Isuzu Lil Pup pickup is tough as nails. It has 150,000 miles on it but has required no major repairs.”
“My best buy ever is my 1971 Deere 4020 tractor which I bought used. It has been totally reliable with no problems. I had a local Deere dealer check out this tractor before I bought it.”
On the minus side, he lists his 1997 Gen-eral Electric washing machine. “I’ve had to replace the motor twice and the water pump once.”
“It has unbelievable pulling power and fuel economy and is like having three vehicles in one,” says Paul, impressed with his 1998 Dodge 2500 4-WD pickup equipped with a Cummins diesel engine and 5-speed transmission. “It’s an excellent starter. No problems so far. I understand the company plans to introduce a quad cab pickup which will be equipped with a 24-valve Cummins diesel engine and 6-speed transmission. I’m looking forward to it.”
On the “worst buy” side, “I’ve had problems with my 1964 Deere 4020 tractor which I bought used with 7,000 hours. It has had a lot of electrical problems, and a hydraulic pump went out. Also, a spindle on the front axle broke. I replaced the axle with one off a 30 series tractor. I think the 4020 is a very overrated tractor. Later models were built better.”
Forest likes his 1998 Ford F-150 4-WD pickup with Goodyear tires. “I do a lot of driving and already have 60,000 miles on the pickup. I’m impressed with the Goodyear tires – they’re still holding up well. My other three pickups had General tires which generally weren’t good for more than about 12,000 miles.
“My 1966 Deere 4020 tractor equipped with a diesel engine is a best buy. It has a whopping 23,000 hours on it. I overhauled the engine at 7,000 hours and again at 16,000 hours. Two years ago I bought a 20-ft. Bush Hog mower to use with it. I’m well pleased with both the mower and the tractor. Even though the tractor is 34 years old, it pulls the mower very well. I mow 800 to 1,000 acres every year.”
“Our best buy is our Woods Dual 255 frontend loader equipped with an 8-ft. bucket and forklift attachment. The forklift attachment works great for loading round bales and pallets of seed.
“OurDeere 4020 tractor is also a best buy.”
Dick’s the satisfied owner of a 1966 Deere 4020 and a 1978 International1086. “The clutch on the 1086 is grabby, especially in reverse. Also the 3-pt. arm extenders - designed for easy hookup - are so tight that they’re almost useless.”
“It has 9,000 hours on it and the only troubles we ever had were minor, with the hydraulic pump and valve,” says Larry, well satisfied with his 1970 Deere 4020.
“I bought my 1968 Deere 4020 used in 1973. It’s a very dependable tractor and I’ve had few problems with it although I did replace the tractor’s front end. It has been a pleasure to drive ever since.
“My 1983 Killbros 250 gravity flow wagon is a best buy. No problems.”
“Our best buy is our 1970 Deere 4020 tractor. It has more than 7,000 hours on it yet the engine has never been touched. The clutch was adjusted once. It just keeps on running good year after year. “Our 1982 Allis-Chalmers M2 combine is one of our worst buys ever. The heater never has worked right and the air conditioner works for only about an hour at a time. It seems to stop working as soon as the service man is out of sight. I call this combine our ‘Choke-Up King’ because it plugs up so easily, even if we’re going only 3 mph in 12 to 15 bu. per acre soybeans. I’ve worked for hours at a time trying to unplug this big, lemon monster. Another problem is that it’s almost impossible to put fluid into the brake cylinder.”
Chuck’s “best buy” ever is his 1964 Deere 4020 tractor. “I bought it used with 3,000 hours and converted it from 24 to 12 volts. It looks and runs like new and I couldn’t be happier with it. I also own a Deere 7400 tractor which is more refined than the 4020 but not as good. It’s had a lot of problems. “My worst buy is my 1995 Honda Fourtrax Foreman 400 4-wheeler ATV. I traded in my Kawasaki 300 Bayou 2-WD 4-wheeler for it and I wish that I had it back. The Honda throws an incredible amount of heat on my left leg, almost more than I can stand. It also backfires frequently. It could use a quieter muffler. After one year I tried to trade the Honda back for another Kawasaki. However, my dealer wouldn’t give me much for it even though I bought it from him and was told that it was the Cadillac of ATV’s. However, if it doesn’t hold its value any better than this I won’t own it for much longer.”
“My 1966 Deere 4020 tractor is not necessarily my best buy, but it’s the closest to my heart. It was my main tractor for many years. It has been semi-retired for quite a few years although I still use it for loader work almost every day. It’s the only piece of machinery I ever bought that increased in value after I bought it.”
“My worst buy of all time was my Interna-tional Farmall 400 tractor. I always knew when I went to the field with it that I wouldn’t be able to stay out all day without it breaking down. “My 1991 GM 4-WD pickup is a worst buy. It had problems with the alternator, starter, cruise control, brakes, and transmission. Also, the paint started peeling off when it was only a year old and I had to pay $100 for a new paint job. The radiator was too small and would heat up and the controls didn’t work right. “My best buy was my Deere 4020 tractor. I could always depend on it. “I also like my 1996 Dodge 4-WD pickup. No problems.”
“One of my best buys of all time is my 1969 Deere 4020 tractor. I still use it. “My 1985 Ford Thunderbird is a best buy. I just traded it in for a 1997 Buick LeSabre which I hope will perform just as well. “My 1994 Ford F-150 pickup equipped with an extended cab pickup and 302 cu. in. engine has been trouble-free. It has 31,000 miles on it. “On the worst buy side I’m disappointed with my Deere 175 hydro lawn mower equipped with a Kawasaki engine. The body of the air cleaner warped at 20 hours. I had to buy an entire new air cleaner - element and all. It wouldn’t start in cool weather until I put an electric fuel pump on it and gave it a little ether. The idler bearings, which were made in Hungary, were poor. “My 1979 Datsun pickup got only 18 to 23 mpg. It burned oil and the exhaust valve seats came out at about 65,000 miles so I had to overhaul the engine. “MySearsCraftsman 9-in. hand grinder was a piece of junk. The armature fell apart but the company wouldn’t even provide a cost estimate on a new one before sending it so I put it in the junk where it belongs. I bought a Sioux grinder which I really like.”
Neil Smith, Battleford, Sask.: “We're very pleased with our Deere 4020 tractor. It just keeps on going and going, and there’s seldom a day we don’t use it, It has a Deere loader on it that’s just a marvelous piece of equipment, too.”
and it starts in any kind of weather.” Eugene Alt, Audubon, Iowa: Gene likes StaBil gas stabilizer. "I was told to use this product with my Homelite string trimmer. I've used it in the trimmer and also with my lawnmowers. I left gas and stabilizer in the tanks all winter long, The following spring they all started on the first or second pull. I was amazed, We also use it with our antique tractors."John Barnard, Malta, Mont.: “I'm pleased with my 1994 Farmhand XL 1340 loader. The bucket makes a straight level cut - there's no problems with one side digging in more than the other. It does everything the dealer said it would."On the negative side, "My 1992 GM 4-WD doesn't have nearly enough power. It doesn't do a good job pulling my 20-ft. livestock trailer."Bob Rea, Meridian, Miss.: Bob's impressed with TLC tire puncture seal. "Our small tractor and all three 4-wheelers experience flat tires almost constantly, This is primarily due to mowing CRP land which leaves many spikes from hardwood brush. This product has completely cured the problem for all four vehicles. "My Tye fertilizer attachment for no-till drills is my worst buy. Despite recommendations to the contrary, we added the optional fertilizer attachment to our no-till drill in order to get better control with the seed. It worked fine for a year, but there's no way to keep the fertilizer from affecting the rest of the drill. We had to remove it after the axle finally froze up."Ricky Downs, Winnett, Mont.: "My 1993 Westfield 9-ft., 8-in. dia. hydraulicdriven hopper bottom unloading auger is my best buy. The auger enables me to reach the bin auger with little difficulty. It had no problem delivering enough wheat to keep up with a 10-in. Hutchinson auger. It moves twice as much grain as T expected."Art Kohls, Ellsworth, Kan.: "Our best buy is our 1969 Deere 4020 with 9,000 hours on it. About all we've done is to change the oil.”
Ralph Brown, Edgewood, Iowa: “My 1993 Ford 3/4-ton turbocharged diesel pickup has a lot of power and performs well. I'm well pleased with it. » “My 1972 Deere 4020 diesel tractor had over 9,000 hours before the engine had to be overhauled. It’s a good all-around tractor.” Charles D. Corlew, Cunningham, Tenn.: Charles is impressed with his 1993 Bush Hog 3126 10-ft. brush cutter. “It's trouble-free and runs smooth, I can even mow the level parts of my yard with it. The double universal joint in front lets me turn orst Buys vious page) short. “My 1992 Bush Hog isn't built well. The blades are mounted too high and have warped. tried to remove them but couldn’t because the bolts weren't anchored in so they just spun. The rear wheel bearings weren't greased during assembly so they wore out and had to be replaced. I sent a registered letter to the company and they signed for it but they never responded. The gearcase cover consistently shook loose, causing grease to leak out. I was constantly losing the blades on the right side of the machine.”
Gabe Loeffelholz, Platteville, Wis.: “My 1986 Honda Big Red 3-wheeler is always reliable, winter and summer, It's been almost trouble-free over many hours of work and play.” Oliver Grandalen, Portland, N. Dak.: “My best buy after 42 years of farming is my 1972 Deere 4020 tractor. We resleeved it and put in new pistons two years ago with 8,000 hours on the tractor. It wasn’t using any oil, but we thought the engine had to have some wear.”
R.D. Fricker, De Valls Bluff, Ark.: “My best buy is a Long 1200 3-pt. backhoe that I bought used from a farmer who had used it on his Deere 4020 tractor. The tractor’s -high oil pressure and high volume of oil caused it to leak quite a bit of oil. I had the main valve rebuilt for $50 and replaced some hoses. I bought it to use on my Deere 2355 tractor, but might also use it on my Deere 4620. installed a ‘T’ in the hydraulic line between the pressure control valve on the tractor and the hydraulic cylinder valve and ran a hose from the T to a Prince RD150-16 adjustable 0-16 gpm flow control valve that I bought from Northern Hydraulics (ph 800 533-5545). I had to use the flow control valve because the backhoe uses only uses 8 gpm. The return line goes to a porton the hydraulic oil filter cannister. “Tuse the backhoe to dig ditches, remove stumps, and transplant small trees and bushes. I also use it to repair levees and to ( )\9.~2— #£=£pape cunw.ac Best & W ( drain rice fields.”
Oscar D. White, Burlington, Iowa: “My 1993 Deere 4255 tractor has only a few hours, but I'm well pleased with it so far. My only complaint is that it idles at 890 to 920 rpm’s. A linkage adjustment was made, but if anything the problem is worse now. I’ve had several Deere tractors over the years and they’re hard to beat. I’m sure some adjustment can be made.” Ronnie Roe, Junction, Ill; “My 1979 Deere 4640 tractor keeps right on going and still works as good as itdid when it was new. My Deere 4020 tractor has over 6,800 hours and is still going strong.”
Ronnie Roe, Junction, Ill.: “My 1979 Deere 4640 tractor keeps right on going and still works as good as itdid when it was new. My Deere 4020 tractor has over 6,800 hours and is still going strong.”
Rich Flees, Helenville, Wis.: Rich's 1966 Deere 4020 diesel tractor, equipped with a synchro-range transmission, is at the top of his “best buy” list. “We bought it 18 years ago and have used it hard for many different jobs with no major problems. It has been overhauled twice and got one new clutch butstill performs like new. It just won’t give up.”
Francis Baker, Sylvania, Ohio: “Our Deere 4020 tractor has over 12,000 hours and our Deere 4440 has over 6,000 hours. They’re both best buys. “Our 1985 Ford F-250 pickup, which we bought used last year, is also a best buy.”
Alonzo Gaubert, Piedmont, Okla.: “My 1966 Deere 4020 tractor has about 8,000 hours but still starts and runs good. It’s my all-time best buy.”
August E. Andersen, Long Eddy,N.Y.: “My 1971 Deere 4020 is the best tractor Deere ever made. “My worst buy is Onduline roofing installed on a 50 by 120-fi. barn. The paint came off after four years but the company said the coloring was not guaranteed. The rest of the roof fell apart within two more years. When I complained to the company, they sent me a complaint kit and I returned itto them with samples of the roofing. They said nothing was wrong with it. say that when you can see daylight through a roof, there's obviously a problem, We finally had to go through the state attorney general office to get.a settlement. I replaced it with a metal roof.” Bruce Eisenga, Marion, Mich,; A 1991 Ford 8630 tractor equipped with front wheel assist and power shift transmission rates as Bruce's “best buy”. “It's an excellent tractor. Has good power, is fuel efficient, and easy to drive. The power shifi transmission works great.”
Alfred Meyer, Chillicothe, Mo.: Alfred’s had good luck with his 1991 BluJet LandTracker 15-ft. implement caddy and coulter bar disk and 1991 Case-IH 5400 15-ft. no-till drill. “The drill and caddy are a dream to operate together. The LandTracker (Blu-Jet Products, Thurston Mfg. Co., Hwy. 87A, Box 218, Thurston, Neb. 68062) is built heavy and is nearly indestructible, It has both front and rear Cat. Ill. 3-pt. hitches that allow me to mount the coulter bar disk on the front hitch and the drill on the rear hitch. The drill is builtheavy and is easy to adjust. I really like its extra capacity and wide lids. “Our two Deere 4020 diesel tractors are also best buys. Both have over 6,000 hours and run and look like new. The best thing 44+«FC ARM CHOW oe 2 about them is that they’re tough enough to pull a heavy drill, yet nimble enough to chase cows.”
Arthur Kohls, Ellsworth, Kan.: “My 1969 Deere 4020 tractor is my best buy ever. It has 8,200 hours and I've changed the oil 82 times. It’s trouble-free.”
Jack Cecil, Mt. Pleasant, Tenn.: Jack nominates a 1972 Deere 4020 tractor and a 1975 Deere 2030 as best buys. “I’ve worked both of them hard with no major problems.”
John Deere gas tractor
46 Best Buys5 Worst Buys“One of my best buys has been my 1973 Deere 2030 gas tractor, which I bought used 20 years ago. It also has a Westendorf loader, another best buy. It’s a very handy outfit that gets a lot of use on my small farm.”
“My Ford 8N was a best buy despite a couple of limitations. It didn’t have live power and was only a 5-speed transmission, so stopping power and speed were limited. I sold it to purchase a Deere 2010 tractor with live power. With live power, the mower can be engaged or disengaged safely with little effort. My wife and 11-year-old granddaughter can now mow our driveway and road ditches with a brush hog mower easily and safely. Another feature is the Deere has eight forward speeds and three reverse. Plus, my granddaughter says, ‘It’s a cool looking John Deere.’
“On a recommendation from a relative, I purchased a new Husqvarna chainsaw. Hands down, it became my worst purchase ever. On the first tank of gas, the piston tore up the motor, and we couldn’t find parts. The dealer told us that because it was a closeout, he couldn’t honor the warranty, and a boat anchor was created. When I called, the company wouldn’t even listen to my problem. Thank goodness I have several newer and old Stihl chainsaws to save the day.”
I had 20 Deere tractors. They were all great with no problems.”
“My 2021 Ford F-250 pickup is good on fuel. The warranty was honored.
“It’s hard to get parts for my 2011 Deere lawn tractor.”
“Both my Scag zero-turn lawn mower and Gravely ATV do a good job and I’ve had no trouble with either. We usually mow three acres or more twice a week.
“I also have several 2-cyl. Deere tractors and they run perfectly.”
“My Central Boiler Classic CL 6048 is a best buy. I use this boiler to heat two houses. We keep our homes at 70 degrees all winter long and it heats our hot water as well. We use dry seasoned wood including whole stumps and pine in the fall and spring. We’ve had it for 13 years and it’s still going strong thanks to proper maintenance and care.
“I have two Deere tractors, a 2000 40-hp. 990 and 2004 30-hp. 790. Both are easy starting, fuel sipping, and good running Yanmar diesels with gear shift transmissions. These simple tractors plow snow, haul wood, snow blow, move dirt, mow, till the garden, chip wood, leaf blow, and grade my 1/2-mile dirt road. I also use a subframe BH80X Woods backhoe with a mechanical thumb to move and hold logs as well as stumping, rock removal, and trenching.”
“My 1981 4440 Deere tractor is still running great. The engine and transmission run like new. I had to put a clutch in it only because some idiot rode the clutch. Otherwise, this is the best tractor I’ve ever owned or heard of.”
“I’ve had quite a few Deere tractors in my time, and they all seem to perform without a lot of breakdowns. I had to split one at the center one time to change an O-ring but that is the only major repair. I’m 85 so I’ve been farming awhile.”
“My 1994 John Deere diesel lawn tractor with a 60-in. deck has 4,250 hrs. on it. I’ve only replaced one fan belt, one injector, and glow plugs. I’ve never had to touch the bearings on the deck. I mow about 3 acres with it. It’s been amazing.”
“I bought a 1962 Deere 2010 gas tractor in 2003. It always starts and runs good. I’ve bush hogged heavy brush with it year after year with no problems.
“In 2020 I bought a new 5220 Branson 55-hp. with a BL200 loader. This is a 4-WD diesel with a 4-cyl. Cummins. So far it’s a ‘best buy’ tractor.”
He likes his Deere tractors but is disappointed with the cost of parts for them. “I was spraying weeds in tall grass with my Deere 2503 when grass got caught in the tractor’s rear axle and ruined the seal. It cost about $2,400 to replace it.
“Last year the plastic hood and cowling on my 2000 Deere 4600 came apart and fell off. The company wanted more than $1,200 to replace them.”
“I upgraded from my Deere 2023 compact loader tractor to a 2025R model, which has bigger tires and better traction but the same bone-jarring ride. The company should install some kind of hydraulic suspension seat.
“My Ariens walk-behind string trimmer equipped with a Kohler engine is very difficult to start and was a worst buy from the get-go. The engine froze up so the dealer replaced it with another Kohler, but it didn’t work much better. I might get the engine started after 20 pulls on the starter rope, or I might not. I contacted the company but they passed the buck and said I should contact Kohler. I own a Bad Boy zero-turn mower equipped with a Kohler engine, and that engine has been trouble-free.”
“I downsized from larger Deere tractors to a 2016 Deere 1025R. I like the quick-disconnect belly mower, quick-disconnect loader, and 3-pt. hitch. I use the tractor almost every day. It has sufficient power for my small farm and the 4-WD ensures I don’t get stuck.
“However, the original fender lights pointed into the back of the bucket so the light bounced back, making the lights useless. I consulted our local dealer, who did not know how the wiring could be re-routed. I contacted Deere and they just wanted to sell me a manual for it. I finally cut the wires and now have LED lights mounted on magnets high on the ROP, which gives me good light.
“My 2016 Kubota RTV 500 goes everywhere. I bought it used but it has performed like new. It is like a mini pickup truck.”
“Over the last 50 years I’ve had good luck with Deere tractors, including 4430, 4020, and 2510 diesels, and a 3010 gas model. All were well-built, nimble, reliable, and powerful.
“Over the years I’ve had trouble with Kohler engines on 3 different zero-turn mowers. These were Command and Courage vertical shaft, twin cylinder engines with 24 and 26 hp. All of the engines developed a knock after about 300 hrs. of use, and one engine blew completely apart. I won’t buy Kohler engines again until they prove themselves to be reliable.”
He likes his Deere tractors but is disappointed with the cost of parts for them. “I was spraying weeds in tall grass with my Deere 2503 when grass got caught in the tractor’s rear axle and ruined the seal. It cost about $2,400 to replace it.
“Last year the plastic hood and cowling on my 2000 Deere 4600 tractor came apart and fell off. The company wanted more than $1,200 to replace them.”
“My new 38-hp. Deere 2038 compact utility tractor is a best buy. Excellent engineering went into this tractor and loader. Very pleased.”
“I use my 2002 Deere lawn tractor to mow our 2-acre lawn, mulch leaves, and blow snow. It still has the original battery, which I think is outstanding.”
“I’m a believer in Deere tractors. In 2014 I bought a used 5525 with a self-leveling loader, and I’ve used it to dig out large rocks and to move about 500 yards of sand to backfill our home’s basement. We bought a 5100E 4-WD tractor last year and it has already proven its worth. We use it with an air blast sprayer on our apple trees and find that it turns much shorter than the 5525. We also use it with a Boss 9-ft. 2-in. V-plow and it’s almost unstoppable for moving snow. The Boss comes with brackets that make it easy to hook up to Deere tractors. Boss and Deere dealers are both great to work with and have promptly corrected any minor problems.
“I’ve owned Massey Ferguson tractors for about 40 years, but I don’t think their new ones are as good. Their utility tractors under 100 hp. are made in third world countries and lack the quality Massey Ferguson was known for.”
“Back in the 1980’s I bought two Caterpillar D4 7U dozers and two Deere tractors - an R and a 1956 70 diesel. All four machines are high quality and still in use today. I think the Deere R was, in its day, the best tractor Deere ever built.”
“In the last issue, various readers talked about trouble with Cub Cadet and John Deere lawn tractors bought at discount home and garden stores. What they probably got was a Murray disguised as a Cub Cadet or Deere. If the serial # on the Cadet starts with a 13, it’s a Murray. If your John Deere serial number starts with a D it’s also a Murray. For me, it was quite a surprise to find I was now the proud owner of a Murray and not a Cub Cadet. Sorry to disappoint all those folks out there who thought they got a deal.”
George says his 1971 International Harvester 1110 pickup “is easy to fix, built rugged, and adaptable to any project. Of course, they don’t make them anymore.”
He has owned 4 Deere tractors over the last 40 years. “My 110 lawn tractor worked well. My 112 lawn tractor broke 7 different axles. Neither the dealer nor the company would pay for the repairs. My third tractor, a 20 hp. 650, needed a new electric front pto clutch but a replacement wasn’t available. The fourth, a 670, came with the poorest front-end loader design I’ve ever seen.”
Over the years, Bruce has had a lot of success with Deere tractors. “I own a 1980 4440 with about 11,000 hours; a 4430 with about 10,000 hours; a 4230 with about 13,000 hours; and a 2955 with about 10,000 hours. None of the engines has ever been touched. The 4440, 4430, and 4230 did require new water pumps.
“All these tractors have actually worked better than me because I had to have my ‘motor’ rebuilt when I turned 82 years old. But I’m now 86 and still going strong.”
“My Deere 2020 loader tractor runs and starts good, and is easy to get on and off.”
“The first Deere tractors I ever bought, a 4440 and a 4240, still run great and have 15,500 hours and 14,000 hours on them, respectively. Neither has been overhauled, and both require only regular maintenance.”
“I have a Deere garden tractor with a front-mounted blade that I use to clear snow off our driveway. I didn’t like the 1-in. wide shoes on back of the blade. They’re too narrow to keep the blade from sinking into wet ground. So I decided to make my own skid plates. They use the same mounting pins and mounting holes and will keep the blade rigid and at a consistent height so you don’t tear up lawns or dig too deep into the gravel.
“The skid plates measure 7 in. wide by 4 in. deep. The blade sets on top of the skid plates, which extend about 1/2 in. ahead of the blade. The blade’s height above the ground can be adjusted by changing the position of a pin. There’s a curled edge on front and back of the skid plates to keep them from catching on anything. To remove the skid plates from the blade you just pull a pair of pins, which can be stored upside down on back of the blade. They sell for $39 per pair plus S&H.”
“I like Deere tractors. Over the years I’ve owned a 1956 Deere 620, a 1964 2510, a 1964 3020, and I still own a 1969 Deere 4020. The 4020 is a great tractor.”
“I thought I was getting the best pickup on the market when I bought my 2005 Toyota Tundra. Boy, was I wrong,” says James. “If I didn’t start the engine every 4 or 5 days the battery would go down and I’d have to jump-start it. I drove the pickup back to the dealer, and the shop foreman said the battery had been drained by the accessories and that I should run the pickup every 2 or 3 days just to keep the battery charged. I don’t use this pickup every day, and I didn’t look forward to jump-starting a brand new pickup. The dealer tried installing a new battery but it didn’t help.
“So I called the dealer again, and this time they told me to bring the pickup in and let it stay overnight which I did. Then they told me the battery had a normal discharge. I told them to install a larger battery in the pickup and they did, which solved the problem. Unfortunately, the warranty had expired and the new battery cost me $138.90, plus four 82-mile trips to town. I think I should have been reimbursed for the mileage and the cost of the larger battery.
“My best buy is my 1966 International Scout and my 1950 M.T. Deere tractor. Both machines still run good.”
“My 1956 Deere model 40 tractor equipped with a Wagner Iron Works front-end loader is my best buy. I’ve used it hard for seven years with very few problems. It’s the best $4,400 I’ve ever spent.
“I paid $90 for my Ryobi garden cultivator six years ago and it’s a best buy. It’s powered by a 31cc, 2-cycle motor that operates a 9-in. rotating cutter at ‘hang on for dear life’ speed. No problems.”
“We have several different brands of trucks on our farm, but Ford is the best. We own Ford pickups, Broncos, and vans, and all have performed great. We also have several old Ford farm trucks that are still as dependable as ever. It’s no wonder Fords have been the best built and best selling trucks for 28 years and running.
“As far as larger tractors go, we’ve had the best luck with our older White models. They’re simple, reliable, rugged and economical machines. Regarding smaller tractors we have the best luck with Fords. It’s a shame to see so many previous companies amalgamated into only a few large companies today.
“Our Fordson Major diesel has 8,614 hours on it and is still going strong.
“Our Deere tractors have always had minor problems. Deere’s service is superb and I like their next-day parts service, but their tractors just seem to have a lot of leaks, start hard, and are also hard to work on, etc. They’re good tractors but not the best on the market.
“We’ve had good luck with Gleaner combines in the past, but I believe the best combines made today are the tried and true Case IH Axial Flow models. They’re simple, reliable, and easy to update. Parts for them are common and they work smoothly and efficiently. We love our Case IH Axial Flow combine.”
“We’ve used Deere tractors over the years, starting with a 1940 model B. We’ve always had one or more on the farm since then. Our latest purchase was a 1997 Deere 7810. We’ve had some minor problems with it including leaking steering cylinders, a hole in the air conditioning line that caused loss of refrigerant, a leaky oil pan gasket that apparently was improperly installed at the factory, and a cab head liner that came loose and dropped down. The dealer didn’t help out on any of these problems. Several of my neighbors have had the same head liner problem in their Deere 7800 series tractors.
“On the plus side, the tractor handles nice and starts right up in cold weather. The cab is roomy and quiet. Also, this tractor is more fuel efficient than our Deere 4440.”
“It starts easy and just keeps on running,” says Cliff about his “best buy” 1972 Deere 2030 tractor. “I bought this tractor used when it was three years old. I’ve used it for both light and heavy duty work, such as harrowing, baling, plowing with a 2-bottom plow, and pulling a 12-ft. offset disk. It now has almost 11,000 hours on it but is still going strong.”
“All of our Deere tractors have been best buys, including a 4450, 4430, 8100, 4020, 2640, and 5520. All of them are easy to operate and reliable, strong performers. The people who designed these tractors put a lot of thought into what they were doing.
“My 1997 Arctic Cat 454 Bearcat ATV is my worst buy. It has had numerous electrical problems and has already gone through seven bal joints. The CV boots split within the first year, and the front end started chattering after only about 18 months. Also, the machine went through a lot of spark plugs, the fan motor burned up, a brake cable locked up, and the gear shifter splines wore out. Resale is terrible”.
“My International Harvester 585 has been a reliable tractor but you tend to forget that after you sit on it awhile because of the lousy ergonomics. Also, this tractor is terribly underpowered.”
“This tractor is a real keeper,” says Larry about his 1961 Deere 2010 utility tractor. “My father bought it new when I was a teenager, and now it’s the only tractor I own. I farm only about 15 acres and use the tractor plowing snow, mowing, and hauling firewood.”
“Our five Deere tractors are all best buys. We own a 4430, 4030, 2630, 2020D, and 3010D. All of them are good tractors and only two have required engine overhauls. FARM SHOW is also a best buy.”
“My worst buy is Uniroyal Loredo tires made by Michelin. After only two years the tread started to separate from the tire. Some steel belts protruded and the tires looked like they were ready to explode. The tires still had a lot of tread depth. I called the company but no warranty or any type of consideration was offered. It’s a poorly built tire from a company that says it makes only ‘perfect tires’.
“My three 1977 Deere tractors are best buys. They include a model 4230 with 5,700 hours on it; a model 2130 with 4,600 hours; and a model 2130 with 3,400 hours. All three have been trouble-free. I have no complaints with any of them.”
“I’m still farming with the Deere tractors that my father bought new in 1968 and 1970 – a 2520, a 2510, a 1020 equipped with a frontend loader, and a 530. They all run nice with very few problems, and if something does go wrong I know how to fix them. I’m 58 years old and have never bought anything new in my life. I take good care of my tractors and keep them in a shed every night.”
“I have two Deere tractors which my dealer seems unable to fix properly. He had one of the tractors longer than I’ve had it and returned it to me with more oil leaks than it had when I sent it to him.
“My all-time worst buy is the Carrier heat pump system I recently installed at my house. It makes so much noise it scares wild turkeys away from our house and it doesn’t pump much heat. Neither the installer nor the company seems able to do anything about it. It’s a $9,000 lemon.”
“My 1950 Allis-Chalmers WD and 1960 Allis-Chalmers D-12 tractors are both best buys. I farmed with them until 1975 when our dealer went out of business. I still own both tractors. They’ve both been overhauled once.
“Since 1975 I’ve been using Deere tractors - a 2030, 2240, 1050 MFWD, 350 dozer, 575 skid steer loader, and 212 and 345 garden tractors. I had to replace a cracked fuel injector on the 2030 five years ago and also replaced a fuel pump on the 2240. The Deere tractors are all best buys, too.
“My New Holland haybine and manure spreader and Fox chopper are best buys. So is my Deere 345 round baler.”
“Your story in the last issue on repowering tractors really struck a nerve. I had previously written to you that I would never buy another Deere tractor after owning an 8960 that was underpowered (until I installed a Schied calibrated fuel pump). Now that I bought a Deere 9400, I’m angry at myself for not sticking to my word.
“The 9400 is ‘almost a tractor’ except that it’s underpowered. I could try to get a computer hacker to boost engine power, but the only component that could possibly be modified would be the fuel injectors. The problem is that the tractor doesn’t seem to put the power to the ground.
“We farmers should be able to make structured power upgrades to our tractors like they do with trucks. I might have Jon Kinzenbaw repower my tractor with a Cummins N14 engine. Then I could paint the Deere engine lemon yellow and mount it on back of the tractor for extra weight.”
“We’ve been using Deere tractors for over 40 years and have never had to replace an engine or transmission,” says John who calls his 4640, 4440, 4230’s and 2240 all “best buys”. “They all have between 4,000 and 7,000 virtually trouble-free hours on them. We had to replace the clutch on the 2240 from overuse.
“We have the fuel pump on one 4230 and the 4440 turned up to give us more power, between 120 to 175 hp.”

Kenneth’s pleased with the five “best buy” Deere tractors he and colleagues use at Keyhole State Park near Moorcroft.
Read the whole story →“I’ve owned several Deere tractors over the years, but my 1995 7400 MFWD model is the best yet,” says Ralph. “It has tremendous lugging power and the Power Quad transmission is excellent. It also has a great cab and controls. It’s an excellent tractor. “My 1995 Dodge 3500 dually pickup equipped with a diesel engine has a lot of pulling power and is easy on fuel. The new-style Dodge pickups are comfortable to operate and a pleasure to drive.”
“I’ve had excellent, trouble-free performance from my Deere tractors. I put 2,500 hours on my 4430, 2,800 hours on my 4640, and 7,800 hours on my 4650. No major problems with any of them. I traded the 4650 for a 1989 Deere 4955 MFWD model and have only one complaint with it - the radiator is difficult to clean. The operator’s manual says ‘lift the hood and slide the condenser out’. However, it should say, ‘phone your neighbor to come and help you lift the hood’. I solved the problem by cutting a door in the right side of the hood with the hinges up and bolts down, using the same size bolts that hold the condenser in place. This allows me to slide the condenser out and lay it on the front axle, providing complete access to the front part of the radiator in less than two minutes. “I made this modification to my 4650 before it even hit the field and also to the 4955. During spring seeding several years ago, the 4640’s used by two neighbors and a 4650 used by another neighbor were running hot because no one has time to mess around cleaning radiators during a busy season. My radiator was running cool. “My most trouble-free combine ever was a 1977 Deere 7701 pull-type model. I used it for 13 years and went through most harvests without stopping. I now have a 1981 Deere 8820. I installed a chaff spreader on it which works well. However, the spreader makes it difficult to access and adjust the sieve. I solved the problem with the steering wheel and cable from an outboard motor boat. I hooked them up to the bottom sieve. The steering wheel mounts outside the cab on the side of the hopper. It took only a few hours to install and required cutting a hole in the side of the combine next to the sieve. It takes 1 1/2 turns of the steering wheel to open and shut the sieve. Both sides of the sieve are tied together and work in unison. A mark on the steering wheel makes a handy reference point for returning to the original sieve setting. “I also installed an electric fan speed control and replaced the original chaffer with an airfoil chaffer that needs no adjustment. It eliminates the need to get off the combine in order to set the chaffer and it lets me adjust the bottom sieve without stopping. From the cab I can check the returns, set the fan speed, watch the grain loss monitor, and see the clean grain in the hopper. Once in a while I check behind the combine just to make sure everything is working right.”
John’s the owner of several “best buy” Deere tractors - a 1991 8760, 1989 4255, 1980 8440, and 1964 4020. “I wouldn’t want any other brand except maybe the Cater-pillar Challenger if a good dealer was nearby. I wish the fuel tanks on the 4-WD models could be filled from either side, and I wish the rear fenders could be folded down or removed so that it would be easier to see and work on forage harvesters and pto-operated combines. I added extra work lights on the 8440 and mounted a Degelman 6-way dozer on it. I also put handle extensions on the remote hydraulic outlets so that I can operate them from behind the tractor. We’re also pleased with our 1995 Deere 740 frontend loader. It’s easy to take on or off and attachments can be changed easily.”
“Over the years we’ve had good luck with our Deere tractors including a 2130 equipped with a 48 front-end loader, 2750 2-WD equipped with a 148 loader, and 2950 4-WD equipped with a 268 loader. We still use our old Deere 60 and 520 models. We also like our Deere 430 round baler and our New Holland haybine.” On the negative side, “I worked parttime for a local tree nursery driving various types of tractors, and I think the worst tractor I drove was a Case-IH 1390. It was one of the first models the company made after Case and International joined. A lot of little things went wrong on it. It had great traction but continually leaked oil and had poor hydraulics.”
JSE William Dorminy, Alapaha, Ga.; “My worst buy and biggest lemon ever is my 1991 7710 Ford 2-WD tractor, The entire tractor has vibrated badly from day one and no one seems to be able to figure out what the problem is. At times the vibration is so bad your hands go numb because the steering wheel shakes so badly. The dealer I bought it from offered to exchange it for a new tractor but he went bankrupt before we were able to do that. I’ve taken it to two other Ford dealers and talked to the regional office in Atlanta, but no one will do anything. They suggested I put new tires on but since the tractor also vibrates when you rev it up at idle, I think the problem’s in the engine or transmission, The tractor vibrates so badly now we're no longer able to use it. “Another problem with the 7710 is that the hydraulics don’t have enough power to pick up a 4-bottom plow and won't turn a hydraulic motor at a constant speed. Also, the air conditioner went out, the clutch had to be replaced, the radio antenna vibrated off, the radio broke, the radiator shook apart and we’ve had many other similar problems.” William says his “best buy” of all time is his 1969 4020 Deere tractor. “It’s a good all-around machine with plenty of power ominate t Buys and it’s easy to handle. I'd buy two more today if they were available.”
Frank Glenn, Farmer City, Ill.: Frank’s impressed with his “Yazoo 60-in. twin 18 Wisconsin mower, This is our second one and it should last until we retire. “Two years ago I traded our Steiger 310 tractor in for a Deere 8960 equipped with a 24-speed transmission and 18.4 by 42 Firestone tires, The Deere tractor has better fuel economy, more power, no separate drop box, much better hydraulics, better traction without tracking, more useable gears, and a much better cab. However, the
( drain hole for the oil panison the side ofthe pan instead of on the bottom. The hoodon the Steiger was easier toraise andhad more clearance, and the drawbar pin lock was easier to operate. The Deere tractor also has a poor oil fill system. It isn’t as easy to enter the cab, and the dash console is very flimsy. _ “T uraded in a Wilrich 45-ft. field cultivator equipped with a 3-bar International coil tine harrow for a DMI 46-ft. Tigermate equipped with a 5-bar spike tooth harrow and Ultra wing sweeps. The DMI has superior trash clearance and does a better job leveling because ithas more wheels. Itfolds narrow for road travel, but the harrow does tangle sometimes. “This is the third year I’ve used my best buy Deere 7200 12-row, 30-in. wing-fold vacuum planter. I previously owned International 500 and 800 vertical wing fold air planters, I liked the fact that the International planters had just two seed boxes and faster markers. However, the Deere planter places the seed at a more even depth and doesn’t have any boots to wear out. It also has a much better monitor. 1 bought four Trotter soybean boxes that hold 8 bu. apiece to help plant bulk beans (Trotter Mfg., Buffalo, IL)”
Frank Lipinski, Buckley, Mich.: q Frank Lipinski, Buckley, Mich.: “Last June we purchased a Farmaster TMR mixer - and our dairy herd average has risen stead ily each month since we installed it. It's well built and does an excellent job of mixing. Our herd average is now 22,800 Ibs. of milk and 921 Ibs. of butterfat. “We also have six Deere tractors with a total of 33,000 hours with practically no down time or repair expense.”
John Leipprandt, Pigeon, Mich.: “It has good power and the comfort ofa smaller / tractor,” reports John, pleased with the Deere , 4455 tractor he leased last year.
John Deere 750 compact tractor
26 Best Buys3 Worst Buys“My Deere 750 compact tractor has very efficient diesel power. I plow some and disc, as well as pull logs for firewood. I have a dirt scoop for the rear. When the power goes out, my PTO generator is very handy.
“I purchased a used Massey-Harris Pony tractor with a center-mounted sickle mower. It was advertised as perfect, and the pictures looked good. I paid to get it home, and it ran for a couple of minutes with a loud engine noise that ended up being the fan mount that bolted to the front of the engine. Someone had filled it with graphite to quiet it, but the fan was wobbling and almost hitting the radiator. It’s impossible to find new or used parts. The tractor wiring was a mess, the air cleaner tube was missing, and the carb leaked. The mower had a broken cast part. I had to sell it at a big loss. No more antique tractors for me.”
“Four years ago we broke a rockshaft on our Deere 750 no-till drill. The dealer ordered a replacement from the factory and promised a one-week delivery. I called once a week to check on the order status. On the fourth week a lady took the call and discovered that the part had never been shipped. She got things rolling, and a week later we got the part. However, the delay cost us a lot because that year we had an early frost and some of our later crops were damaged.”
“My 1997 Deere 750 no-till drill does a good job in moist soil types and requires very little maintenance.”
On the negative side, “My 1997 Chevrolet Sonoma 4-WD pickup equipped with a 4.3-liter V-6 engine got only 15 mpg and didn’t have enough power to do anything. The cab is way too small for more than two people.”
“I like my Mayrath 10-in. dia., 62-ft. long swing away auger. I had been using a grain leg to unload wet corn and it took one hour to unload 1,300 bu. With this auger I can unload the same amount in only 18 minutes. I had a couple of problems with the universal joint and with the gearbox. However, the dealer and the company took care of the problems.”
On the “worst buy” side are the replacement discs he bought for his Deere 750 grain drill. “After I put them on I planted just a few acres of wheat when I noticed that the blades were getting all nicked up - and we have very few rocks. I double checked to make sure I had put the discs on right. Then I mentioned the problem to my dealer and he said there were problems with some ‘soft’ blades and that he would replace them free. But what made me mad was that I had to take the discs off and replace them myself. It’s not a pleasant job.”
“It pulls easy and does a good job of placing seed in all conditions. It’s also almost maintenance-free,” says Jeff about his Deere 750 no-till drill.
On the negative side, he’s not happy with his 1997 GM Jimmy SLE. “When we drove it off the lot the cruise control didn’t work and it was in the shop for five days before they were able to find the problem.”
“It does a good job of metering seed for accurate planting,” says Jim about his Deere 750 drill. “After trying other types of drills, we came to the conclusion that you’ve got to match your drill to your soil type. The 750 is best-suited to ours.”
“My Deere 750 no-till drill works well in no-till beans. “My 1997 Ford F-150 4-WD pickup is a pleasure to own.”
“It does an outstanding job of planting in all tillage conditions, from conventional to no till,” says Robert, pleased with his 1996 Deere 750 no-till drill. “We used it for soybeans, grain sorghum, and wheat. It’s a typical Deere piece of equipment because it does the job, just like our Deere 7810 and 7410 tractors.”
“My 1994 JM Innovations mini-floater sprayer equipped with an MT3000 monitor is my best buy. Both the sprayer and monitor are accurate and save on labor, allowing us to go to a total postemergence weed control program. It’s one of the few products I’ve bought that was set up and ready to go without the operator having to make modifications or improvements to it. “My 1995 Deere 750 no-till drill is easy to operate and performs well under a variety of conditions.” On the “worst buy” side, “My 1993 United Farm Tools 15-ft. no-till drill wouldn’t plant with precision under any circumstances except in soft sand. The coulters and press wheels created a mess instead of a seedbed, making it impossible to achieve a uniform seeding depth. The seed population rate was difficult to set and wouldn’t stay constant so after I planted several acres I had to reset it. The company denied any problem with the drill. I traded it in for the Deere 750 and couldn’t be happier with it.”
“My Deere 750 no-till drill works great in all conditions.”
Hugh doesn’t like his 1992 Deere 750 15-ft. no-till drill which he bought used two years ago. “The problem is that it has 125 grease fittings and all of them are almost impossible to reach. I have to crawl under the drill between the ranks of openers. The same is true for the depth adjustments on the seed openers. Every time I have to service this machine I cuss the engineers who designed it. Also, the seed tubes plug up easily. I’m surprised that Deere even put its name on this machine.” Ed Swanson, Minnesota Department paying $45,000 to replace it. In this case, because the tractor was four years old and had 1,500 hours on it, a settlement may be harder to agree on.”
“It’s trouble-free and does an excellent job placing seed in all soil types and conditions,” says Ray, pleased with his Deere 750 no-till drill. “It has massive downpressure springs that allow it to hug the ground in uneven terrain. I mount it on a Mauer 3-pt. hitch which makes it easy to attach and detach the drill and also allows me to turn shorter in tight spots. “MyPardner 65 chain saw works good but has one problem - the needle valve adjustments on the carburetorstray from their ‘starting’ settings. Whenever I shut off the saw and restart, it floods. I have to constantly readjust the high-low settings in order to get it started. Sometimes it takes 20 minutes to reinstall the carburetor’s cover plate because I can’t find the small hole that the hold-down screw goes into. Once I have it running I make sure that I never shut it off until I’m done with the job.”
William J. Davis, Sheridan, Ind.: “I’ve had excellent yields from crops planted with my Deere 750 no-till drill,” says William about his “best buy”.
Bernard Roberts, Syracuse, Ind.: Bernard is pleased with the Deere 750 no-till drill he bought new in 1994, “In our variable and stoney soils, it outperforms all other brands we rented in the past.”
Robert Williams, Morral, Ohio: “My 1994 Deere 750 drill is built strong and works great for no-till. I plant at 7 to 9 mph and this drill puts the seed exactly where I want it. The only problem I've noticed is that you have to change the location of the openers over the rows on 30in. spacings to keep the gauge wheels from hitting stalks and inhibiting population in rows. It shows in the operators manual what openers to change.”
Greg Geiger, Morton, Ill.: “It's hard to fill this grain drill if you don’t have an auger system,” says Greg, who's otherwise pleased with his 1994 Deere 750 no-till grain drill, “It has great depth control at all speeds and produces excellent stands. “My 1994 White 6100 planter spaces seed accurately and also produces excellent stands. However, the transmission is somewhat clumsy to use and the hopper lids leak insecticide whenever the planter is folded vertically. “My worst buy is my Deere 350 mower. The cutter bar is difficult to raise into transport position - it should be powered by a separate hydraulic system. Also, it’s difficult to hook up the quick hitch to the drawbar lift mechanism.”
Ken Anderson, Trenton, Mo.: “I’m happy with my 1992 Deere 7240 15-in, notill planter. The vacuum row units do a precise metering job and depth control is excellent. Adjustments are simple to make. The optional cast-iron closing wheels close the seed trench in difficult conditions, yet also work fine in conventional tillage. I traded in a 1988 Deere 750 no-till drill for the planter. Due to its weight, the 750 did an even better job of soil penetration than the 7240, but for accurate seed placement and depth control there’s no comparison between the two machines. Later models of the 750 no-till drill have been improved. The transport axle pivots and closing wheel alignment on the 7240 could be redesigned, but overall it’s a well designed machine.”
John C. Smith, DeWitt, Iowa: “My 1994 Deere 750 no-till drill is a well-designed piece of equipment. It’s easy to operate and easy to fill.”
C. Tim Bishop, Queenstown, Md.: “My 1993 GM 2500 2-WD Suburban with a454 cu. in. engine is my best buy. I installed a set of Thorley headers equipped with a Walker Super Turbocharger muffler and a reprogrammed Hypertech computer chip. I got 11 to 12 mpg towing a 24-ft. race car trailer and 15 mpg without the trailer while hauling 7 passengers or 30 bags of seed corn. I'll pass up anything on the road and has the style and comfort of a luxury automobile. It also has great resale value. However, I wish ithad remote electric door locks and heated side mirrors. “My 1993 Deere 7200 6-row, 30-in. vacuum planter is equipped with Yetter residue managers. It's easy to adjust and plants accurately. Last year I had my best ae > orst Buys ious page) stand of no-till corn ever. “My Deere 9500 combine is equipped with Pixall snapping rolls that eliminate the need to chop corn stalks (Pixall Mfg., Clear Lake, Wis. 54005). The rolls have 10 sharpened, chrome-plated knife blades that intermesh to grip corn stalks and weeds, pulling them down through the snapper plates and crimping them for faster decomposition, We use a Deere 750 no-till drill to plant notill soybeans in untouched corn stalks the following year. Both the combine and drill do an excellent job and have good resale value.”
Dan Smith, Scottsburg, Ind.: “My 1992 Deere 750 no-till drill is my best buy. I’ve used it to seed 1,200 acres with no problems.”
Kenneth Frank, Minonk, Ill.: “My 1991 Deere 9500 combine is a pleasure to operate. It has a large, quiet cab and plenty of power. No problems. “The Deere 750 no-till drill we rented last year did a good job.”
Rob Helm, Kincardine, Ontario: “This drill has lived up to our highest expectations,” says Rob, pleased with his 1992 Deere 750 no-till drill. “Wehaven'thad any problems with seed placement. It plants ata consistent depth in both sandy and claytype soils. The only problem is that it’s difficult to service.”
Jeff Potter, Redwood Falls, Minn.: “Our 1992 Deere 750 15-ft. no-till drill is our best buy. We used it to plant 900 acres of beans in standing corn stalks. It has excellent “It has excellent down pressure. I think it could plant into blacktop.” down pressure. I think it could plant into blacktop. It’s easy to operate and rugged and was designed well from the ground up.”
Robert White, Mackinaw, Ill.: Robert's impressed with his 1991 Deere 750 no-till drill. “It does a great job and that’s a real compliment from someone who has a whole shed full of red machinery. One of our landlords has made trails in fields all over the farm as he drives to different areas. This drill places the seed at the right depth even on those trails,” Robert F. McGinnis, Poughkeepsie, N.Y.: “The steering is slower than on other mowers I’ve used,” says Robert, who’s otherwise pleased with his 1992 Cub Cadet 1440 garden tractor equipped with a 42-in. 2-blade high-vacuum mower deck. “It does anice job mowing without scalping, and the 5-gal. gas tank lets me mow all day without refilling. The new 14 hpengine by Briggs & Stratton is quiet, fuel efficient, and has plenty of power. Controls are handy and it rides comfortably. I like the tilt steering wheel and adjustable sliding seat. It’s a well built machine.”
Greg Miller, Freeport, Ill.: “My 1992 Deere 750 no-till drill does an excellent job of seed placement, yet leaves the ground in firm shape after going through corn stalks.”
Lawrence Schluter, Armstrong, Ill: A 1991 Deere 750 no-till drill heads Lawrence's “best buy” list. “The accuracy of seed placement is outstanding. We've used it to seed wheat and oats as well as soybeans.”
Walter Lamb, Olive Branch, Miss.: “My best buy ismy 1986 Deere 750 tractor. It’s a good compact 18 pto hp tractor and it handles almost any attachment. It has required only routine maintenance.” On the negative side, “I can’t find parts for my Hardee 25B sprayer so I have to fabricate them myself. There are no dealers in my area to help, Other than that it’s a pretty good sprayer.”
David R. Cook, Marshall, Mich.: “Our 1991 Hardi TR500 sprayer is a worst buy. Nozzles and nozzle screens plug continuously. Nozzle check valves plug when using dry fIowable materials. Self cleaning screen often plugs. If it does self clean, it sends dirt back into the spray tank. The electric valves open too slow for spot spraying herbicides. The pressure gauges are too ninate suys small and hard to read. Everything is metric and the plumbing is too complicated. When the tank has less than 50 gal. in it, the gauge won't show the volume. When there’s 30 gal. or less in the tank and the sprayer is on sloping ground, the pump will suck air causing the sprayer to lose pressure. It’s very difficult to finish a job without having a lot of leftover chemicals in the tank. “Our 1991 Deere 750 no-till drill isa best buy. We've used it to seed soybeans and wheat in both no-till and conventional till with excellent results. Iteven did a good job seeding beans into irrigated corn ground that hadn’t been touched after harvest. The beans made 53 bu./acre.” Myles C, Elsberry, Wausa, Neb.: “Our 1992 Case-IH 8480 baler is a best buy. It may not make the best looking bales in the world, but we've got the best quality hay we've ever had. We’ ve used it to make over 1,000 bales so far and have had only a few minor problems.”
David Peck, Oxnard, Calif.: “The 800Ib. 3-pt. lift arm limit is the only drawback to these small workhorses,” says David, who otherwise is pleased with his Deere 750 and 770 4-WD tractors. “I've got 100 acres of raspberries on narrow, trellised rows and I use these tractors to do all of my cultivating and spraying. After three years I’ve had no major repairs. The tractors are easy to get on and off and easy to drive. They do a surprising amount of work for their size and horsepower.”
John Deere 4430 tractor
24 Best Buys3 Worst Buys“As a dairyman, I haven’t bought much new equipment during the last couple of years due to the poor dairy economy. Besides, I honestly love my older equipment including my Deere 4430 tractor with about 17,000 hrs. on it, and my Case 85 XT skid loader with about 14,000 hrs. My Deere 8320 tractor and 1989 Mack R688 truck are also best buys.
“My 2015 Bobcat S770 skid loader isn’t a bad machine, but the local service department is impossible to work with. I can’t schedule repairs unless I have their road mechanic come out to the farm, which is very expensive. I’ll never buy another Bobcat.”
“The Deere 4430 tractor I bought used starts good and runs even better. Works great to disk, plant corn, and bale hay.
“I bought a Rascal Eradicator gopher gasser last spring after reading about it in FARM SHOW (www.rascaleradicator.com; ph 303 910-9106). It comes with an engine that pumps carbon monoxide out two hoses at once to kill gophers and other burrowing rodents quickly and safely. The company delivered the machine to my farm and demonstrated it. I’m still using this machine, but it’s so effective that now we have fewer runs to use it on.”
“The 1976 Deere 4430 tractor I bought used 6 years ago has been trouble-free. The hour meter on it doesn’t work, but it must have at least 15,000 hours on it. I own three other Deere tractors - 80, 730, and 750 models - and all work great.”
“My best buy is the 1976 Deere 4430 tractor I bought used with about 2,500 hours on it. It now has almost 15,000 hours but my sons still use it regularly, and it’s still worth about what I paid for it.”
“My Deere 4430 tractor is my best buy. It’s easy on fuel, handy to operate, and goes a long time between overhauls.”
“My 2006 diesel-powered Kubota ZD-28 zero turn mower equipped with a 72-in. deck is my best buy. I use it to mow pastures, large fields, and yards. It’ll go four hours on five gallons of fuel and has reduced my mowing time by half.
“The cab I bought for my 1979 Deere 4430 tractor is a best buy. But the cab I bought for my Deere 6420 4-WD tractor is not. The fuel gauge on it works only part of the time, and the ‘miles per hour’ gauge has never worked. A Deere dealer has worked on it twice but it still doesn’t work right.”
“Our Deere 4430 tractor has more than 8,500 almost trouble-free hours on it and is still running strong. A few years ago we had to get the reverse gear on it fixed, but otherwise this tractor has required only routine maintenance. We use it for everything from cultivating to baling, plowing, and hauling gravity wagons. My grandfather has an identical tractor with more than 11,000 hours on it. It still has the original engine. This tractor is definitely a best buy.”
Judd nominates his 2000 MacDon 9200 swather as his “best buy”. “This machine has cut about 3,000 acres of hay per year without any major problems.
“My Deere 4430 tractor is my worst buy. The engine blew up, the transmission has gone out three times, and the hydraulics don’t work right. Also, it uses four times more fuel than my International Harvester tractors do.”
A 1977 Deere 4430 tractor rates as Robert’s “best buy.” He bought it used in 1980. “The tractor has 8,432 hours on it but still doesn’t burn a drop of oil. It has never had an overhaul and still starts and runs well. This 4430 is pretty good just the way it was built back in 1977.”
“It’s the most trouble-free machine I’ve ever owned,” says Lloyd about his 1976 Deere 4430 tractor. “The engine, transmission, and rear end have never been taken apart. It has more than 13,000 hours on it but still runs as good as the day I bought it.”
“My dad’s 1977 Deere 4430 tractor is our best buy. We rely on it for most of our field work. It still has the original engine, which now has just under 11,000 hours on it and has never been overhauled. We won’t be buying a new tractor any time soon, but we don’t need to because this one works so well.”
“My 1973 Deere 4430 tractor has almost 10,000 hours on it, and the only repair we’ve had to make was 10 years ago when we replaced a gear on the injector pump. We use it every day and it still has as much power as when it was new. My only complaint is that it starts hard in cold weather.
“Our 1998 Deere 945 13-ft. disc mower does a beautiful job of mowing. We average 60 acres a day with it and it requires very little maintenance. One complaint - I wish the company would stick with either American or metric bolts – not both.”
“Our Deere 4430 tractor has more than 10,000 hours on it with only one engine overhaul. It’s one of the best tractors we’ve ever owned.
“We really like our Great Plains no-till 24-ft. soybean drill.”
“Our best buy is a 1999 Deere 6210 2-WD tractor equipped with a Power Quad transmission. It starts great in cold weather, has a lot of traction, and has plenty of power to get through tough spots.
“Our 1974 Deere 4430 tractor is also a best buy. It has more than 8,200 hours on it but just keeps running. Like they say, ‘Nothing runs like a Deere.’”
John’s equally happy with his 1975 Deere 4430 diesel and his Deere 3010 LP. “Except for changing the oil every 100 to 150 hours, the 3010 has had nothing done to the engine. The only thing the 4430 ever needed was an engine overhaul at 7,700 hours.”
John added a second remote hydraulic to the 3310 and built a dozer for it. He’s also now adapting it to use with a backhoe.
“It has nearly 10,000 hours on it and has had nothing done to the engine,” says Duane, pleased with his 1977 Deere 4430. “All we’ve done is replace one axle bearing and had the air conditioning system switched over to new coolant. It starts and runs great and uses no oil.”
“My worst buy was my 1972 Deere 4430 tractor equipped with hydraulic front wheel drive. I bought it used and it turned out to be the biggest piece of junk I ever had. I used it to plow and always worried that something would go wrong with it.
“At the time it was made Deere didn’t offer mechanical front wheel assist. The hydraulic front wheel drive on this model could be used with the transmission in either low or high torque. The problem was that in high torque it pumped a lot of oil. The company recommended using high torque only in an emergency but that wasn’t always practical. One time the oil got so hot it blew the hoses out and oil went flying all over the tractor, including the cab. It was a real mess and cost a lot to repair.”
Andy likes his 1977 Deere 4430 tractor. “It’s easy to operate and has creature comforts that are hard to top. It’s also easy to service.”
“I’m retired now but when I farmed I really liked my 1977 Deere 4430. It was very reliable and on a per-acre basis was the cheapest running tractor I ever owned. Very quiet and smooth running. The only problem I ever had was when the high-low powershift clutch went out at about 5,000 hours. Apparently it was a factory defect. As far as handling goes this tractor even beat my 1970 Deere 4020. It was rated at 125 hp but easily put out 140 hp - without any modifications. It had a weak hydraulic system on the hitch and the remote cylinders. I understand this was a problem on all the 4430s. The 4020’s hydraulics were much better. The original lights were pitifully weak so I added some more. I also installed front fenders to keep gravel from hitting the windshield and to improve the tractor’s looks.”
“I wasn’t as satisfied with my 1980 Allis-Chalmers 185. It had way too much downtime. The oil cooler sprang a leak and oil got all over everything. The left rear seal went out. The float on the fuel gauge was made of plastic which dissolved and kept plugging the fuel system. I finally replaced it with a brass one. The injection pump jumped out of time and the dealer couldn’t fix it. The air conditioner thermostat never lasted more than a couple of months so I finally replaced it with another brand which worked. The tractor had plenty of power for its size but had a noisy engine. Fuel economy was only fair. The tractor was hard to shift without clashing gears. The power steering was nearly nonexistant under 1,800 rpm’s, which meant that I had to ride the hand clutch when turning while cultivating or planting. It did have a good hydraulic system.“ owner of a 1976 Allis-Chalmers 7040 equipped with a power shift transmission. “The transmission doesn’t have enough different field speeds and the tractor is hard to start when the weather is cool. Otherwise it’s a good tractor.
“My 1969 Allis-Chalmers 190 XT equipped with a 95 hp diesel engine has a lot of power and starts good. It’s also economical to operate.”
“My 1975 Deere 4430 tractor was a best buy. I sold it a year ago with 8,600 hours on it. It never used any oil. My Deere 4320 was an excellent tractor, too.
“My worst buy is my 1995 Chevrolet 1500 1/2-ton 2-WD pickup equipped with a 6.5-liter diesel engine. It gets about 18 mpg which is disappointing because I was told when I bought it that I could expect 25 to 30 mpg. Our 1995 Ford 3/4-ton 4-WD extended cab pickup equipped with a 7.3-liter Power Stroke diesel engine gets 16 to 20 mpg.”
“My 1976 Deere 4430 has 8,000 hours on it. The only thing we’ve had problems with is the transmission. It’s a reliable tractor that puts out 144 hp on the dynometer.
“My 1989 Ford F-250 pickup equipped with a 351 cu. in. V-8 engine is my worst buy. It was always in the shop and was hard on fuel. I think the problem is that it’s geared too high.”
David’s the owner of a “best buy” 1978 Deere 4430 turbocharged 125 hp tractor. “I bought it used with 2,200 hours. It has done everything we’ve asked it to do. We use it to cut, rake, bale, haul, and feed hay. We also use it to subsoil, plow, and disk. One time we hooked 10 wagons together behind it that we used to haul round bales. Each wagon had eight bales on it weighing 1,800 lbs. apiece. We stacked the bales double wide and put two on top to hold them on. It totaled up to 72 tons of hay which the tractor was able to pull with no problems, even though two tires on the wagons blew out. It just kept on pulling.”
“One of my ‘best buys’ is a 1975 Deere 4430 tractor,” Dean says. “It has 8,000 trouble-free hours on it. It still uses no oil.”
Joe Doyle, Holton, Kan.: “My Deere 4430 tractor has 8,000 hours and is my best buy. It has never been in the shop, except for updates.”
Bill Critchfield, Osceola, Mo.: “Our 1994 Deere 7400 MFWD tractor is a best buy. The power quad transmission shifts smooth, and the engine runs quiet and has plenty of torque and power for a 100 hp tractor. “My 1976 Deere 4430 tractor has performed well with only a few minor problems with the air conditioner. “My all-time worst buy is my 1990 Suzuki 4-WD 4-wheel ATV. The engine has had continuous problems, especially with the carburetor, which keeps flooding, The dealer wouldn't pay for repairs even though it was under warranty, and the company wouldn't help, either.”
Paul E. Nelson, Jackson, Minn.: “I bought a used 1977 Deere 4430 tractor in 1980 with 800 hours. It now has almost 17,000 hours, but the engine still doesn’t need an overhaul. I haven't done anything to it except change oil. I replaced the clutch and turbocharger and overhauled the hydraulic pump. attribute the long life of this tractor to timely oil changes and daily startups.”
Jeff Potter, Redwood Falls, Minn.: Jeff says his 1974 Deere 4430 tractor heads his all-time “best buy” list. “It has 9,000 hours onitbut the engine hasn't been touched. We had the injectors and pump checked at6,500 hours and they were still within specifications. It starts good even in cold weather and doesn’t use any oil. I use it to plant over 1,500 acres every year. It just keeps going and going. “My 1987 Ford 1-ton dually crewcab pickup is a worst buy. The heater core leaked, the anti-lock brake light kept coming on, and the clutch slave cylinder went out twice. The starter doesn’t engage all the time even though we’ ve worked on it twice, and the front tires wear uneven. It’s also a cold-blooded starter.” Jim Holkesvig, Mayville, N.D.; Jim's “best buy” is Agri-Cover grain box tarp (K and G Sales, Mayville, N.D. 58257). “It installs and rolls easy and stays tight even if it’s rolled only half way across the box. Be sure to get the 12-in, end caps.”
John Deere Gator every day
24 Best Buys3 Worst Buys“My Deere Gator was expensive, but it’s very dependable. I just do oil changes and regular, limited maintenance. They’re quality machines.
“My 2022 Poulan chainsaw is the same size as my old one but has limited power. It had to be tweaked to get it running right.”
“It’s one of the best pickups I’ve ever owned,” says John about his 2006 Ford F-350 Super Duty model.
“My 2004 Deere Gator just keeps on going with no problems.
“My 2000 Husqvarna weed trimmer is still going strong.”
“I use my Deere Gator every day and believe that every old man like me should have one. I use it to pick up the mail, to gather sticks, and to haul chainsaws, weed trimmers, and fencing items. It has almost 1,000 hrs. on it. I can’t keep my grandson off it, and I wish I could buy one for my wife, too. I do think the company could lower the price.”
John’s satisfied with his 2016 Polaris Ranger 4-WD utility vehicle equipped with a 900 cc engine. “It has excellent power, a smooth ride, and starts good in hot or cold weather. We use it every day on our farm. The only problem is that it shifts really hard into reverse the first time we use it every day. With 4-WD and a locking differential, this machine will go just about anywhere.”
On the minus side, he lists his 2014 Deere Gator equipped with a Briggs & Stratton engine. “The engine developed a head gasket problem soon after the warranty expired, and the dealer wouldn’t cover the $1,200 repair bill. He offered to take the machine on a trade-in but I declined. Instead I brought it home, waxed it up, and sold it. Then I bought the Polaris, which is a superior product in every way.”
“I bought my 2012 Deere Gator because I needed a utility vehicle with power steering, but that was the first thing to go wrong with it. Then other problems developed. The battery went dead all the time because it was wired wrong. Reverse gear wouldn’t work so they put in a new transmission, fortunately before the warranty expired. However, after the warranty expired it started having problems again. This time they worked on it and I ended up paying $186. Now it’s back in the shop again.
“We’ve always owned Deere equipment but have never had trouble like this. I used my previous Gator for 8 years and it never had any problems.”
“I’m disappointed in our 2010 Kawasaki Mule utility vehicle. About two months after we bought it the engine started to have problems. It would die and then after 5 min. the engine would start and run a while, but then the same problem would happen again. We took the machine to the dealer, who installed a bunch of new parts and kept it for a month. When we got the rig back, it still had the same problem. We got a big repair bill that should have been covered under the warranty. We plan to get rid of this machine and buy a Deere Gator.”
“We bought a used Deere Gator to replace a golf cart, and it works so well we wish we had bought it a long time ago. It hauls up to 1,500 lbs. and has a dump box. Gets great gas mileage and always starts. I could have paid for the Gator with the money I spent on batteries over the years for the golf cart.”
“My 2006 Deere Gator is trouble-free and does everything I ask it to. It rides on no-flat tires which I really like.”
Bob’s the satisfied owner of a 2005 Deere Gator. “I think every farm needs at least one or two of these machines. I have one, my wife has one, and my grandkids one. I paid about $6,700 for it. I probably use it on average 12 times a day, for everything from getting the mail to hauling chainsaws, wood, apples, and fencing items, and transporting deer hunters.
“I’ve had problems with my 2008 Cub Cadet zero turn riding mower equipped with a 52-in. deck. The B & S engine has problems and the mower pulls sideways. Also, it won’t pull itself up a 25-degree hill. However, the mower does a great job around small trees and I like the leaf vacuum attachment.”
“I like shopping at Tractor Supply Company. It’s a small store so I can get in and out quickly. They sell good stuff at a good price and provide excellent customer service.
“My Deere Gator is a best buy. I have no idea how I ever got by without it.
“My 2002 Ford F-150 4-WD pickup works great. It’s equipped with a V-6 engine and a 5-speed manual transmission. The seal on the slave cylinder went out. It would have been an expensive 10-hr. repair at the dealership. Instead, I pulled the engine out and did the work myself in only 5 hrs.”
“A couple years ago I traded my 4 by 2 Deere Gator, equipped with a single cylinder air-cooled engine, for a new Gator HPX 4-WD model equipped with a 2-cyl. water-cooled engine. When the weather gets cold, say under 20 degrees or so, the HPX pumps raw gas into the crankcase until the engine stops.
“I use my Gator for a lot of short trips around the farm all year long and when the weather is nice, there’s no problem. Other Gator owners of the HPX and XUV I’ve spoken with have had the same problem. The dealer said ‘they all do that’ and that you have to warm them up and burn it out of the crankcase.
“But that doesn’t work. Even if you let the machine run with the engine warmed up, if it’s cold out it still pumps raw fuel into the crankcase. I tried running a flexible hose from the air cleaner inlet to take heat off the muffler. That seems to help, but it doesn’t solve the problem. Has anyone out there found a cure? My HPX has a Kawasaki engine and a carburetor.”
“It starts right up in any weather and, with 4-WD, it can go anywhere,” says Edsel, pleased with his 2009 Deere Gator utility vehicle equipped with a diesel engine. “It has comfortable seats. No problems.
“My 2007 Stihl chainsaw is difficult to start and is my worst buy. I’m 71 years old and have to get my young neighbor to start this saw for me.”
“Our 2007 Deere Gator is a reliable and versatile machine. We’ve put more than 350 hours on it with no problems, except for the fuel gauge which stopped working after the warranty had expired.”
“We like our 2008 Deere Gator. It’s equipped with an optional adjustable seat which comes in handy for my shorter wife, and an electric dump bed. This utility vehicle does exactly what it’s supposed to do. We use it all over our farm and yard, even though it was originally purchased by my wife for ‘house keeping’ duties. It has a low bed height which makes loading stuff easy and also provides stability on hilly terrain. The differential lock provides just enough extra traction to get through muddy places.
“This vehicle is easy to service at home and is comfortable to get in and out of for us ‘boomers’. It replaced my wife’s 1985 Honda 250 Big Red. The Honda was also a best buy.
“We’ve also used the Gator to spray fence rows instead of a 4-wheeler. It’s much easier on the spray hand. If we need to get into tight places we still have a 4-wheeler and the Honda for that, but 99 percent of the time it’s the Gator that does the work on our farm.”
Steven’s unhappy with his 2004 Deere Gator. “I’m a Deere enthusiast - everything I own is green and yellow, and over the years I’ve restored fourteen different 2-cyl. tractors. However, my Gator has been a total disappointment. It’s hard to start and keep running, and when the belt gets wet it won’t go. Also, this vehicle won’t hold back going downhill and the power tilt bed was very weak. None of these problems could be fixed.
“Finally I traded it in for a 2005 Kubota RTV 900, which is my best buy. It always starts, even in sub-zero cold. I really like the hydrostatic transmission because it holds back even with heavy loads while going downhill. The cloth cab heater works great, and the dump bed tilts even when it’s overloaded. It’ll pull trailers and logs well over its rated capacity. It’s fuel efficient, too. I can drive it for several weeks on one tank of fuel.”
“In reference to Gary Alford’s statements in a recent issue about poor starting problems with his 2005 HPX 4-WD Deere Gator, I can say I had the same disturbing problem with my 05 HPX Gator. When I would shut it off for 15 minutes on a 90 degree day, I’d have to choke it to death to restart it.
“After two visits to the dealer with this problem, we finally found a solution. We traded it in for a diesel Gator which we are more than pleased with. It starts great and uses only half as much fuel as the gas model.
“One problem: It should have power steering because it steers hard. I have a Deere diesel lawn tractor with power steering so if they can put a unit on there, they should be able to add it to the Gator.”
Stephen’s the satisfied owner of a 2006 Deere Gator. “It has more than paid for itself with the savings in gas compared to doing chores in a full-size pickup. As a bonus, it’s fun to drive.”
Phillip nominates his 2005 Deere Gator as his “best buy”. “My wife was the one who expressed an interest in buying this utility vehicle. We use it almost every day. It has enough power to pull our boat dock up a steep incline and will run forever on a tank of gas. The electric dump bed is worth the extra money.”
On the “worst buy” side, he lists his 1999 Long Farmtrac 60 tractor. “This was the first new tractor I ever bought. The tractor was advertised to be ‘just like a Ford New Holland’ and the specs on it were almost the same. However, I was able to put a total of only 120 hours on this tractor because I had so much trouble with it. The brakes were bad, the hydraulic system leaked, and the fuel gauge was faulty. I did learn how to bleed a diesel fuel system. After one year I traded this tractor in for a Deere 5210, and I’m well pleased with it.”
“My Deere Gator is by far the handiest vehicle I’ve ever owned. I can’t see how anyone could set up housekeeping without this machine. It serves as a small pickup and as a general, all-around utility vehicle. It starts right up and will run forever on a tank of gas. It’ll go about anywhere on our farm. My son bought it for me and I’m just as pleased as a young mother. We can even ride it to church on Sunday.”
“My Deere Gator is by far the handiest machine I’ve ever owned. I can’t see how anyone could get along without it. It serves as both a small pickup and also as a general all-around utility vehicle. It always starts right up and seems to run forever on a tank of gas. It’ll go about anywhere on our farm. If I want I can even ride it to church on Sunday.”
Chris likes his 1999 Deere Gator. “It’s our fourth Gator so we obviously like them. We also bought a mini one for our 4-year-old. It runs quiet, looks good, and doesn’t go too fast so it’s safe for him.”
“In FARM SHOW’s Vol. 24, No. 4 issue, Daniel Stokes of Omro, Wis., reported that his 1999 Deere Gator was leaking gas into the oil. I’m having the same problem with my 2000 6 by 4 Gator. The spark plugs foul out and the engine backfires. The Deere dealer has worked on it several times without success so I bought a new carburetor. That didn’t solve the problem and gas is still leaking into the oil. Does anyone have an answer for this problem?
“In FARM SHOW’s Vol. 25, No. 6 issue, Larry Blockard of Hartman, Ark., said he was having trouble with fuel leaking from the fuel cap on his 1999 Deere 5410 tractor. My 2000 Deere 5310 tractor also leaks fuel out around the fuel cap. I discovered that the cap couldn’t be screwed down far enough on the tank’s plastic neck because the threads on it were faulty. I installed a new tank which solved the problem.”
“I’m well pleased with my 1999 Deere Gator, except that the engine has a tendency to leak gas into the oil in cold weather. The company installed a different jet in the carburetor and changed the spark plugs, but I don’t think they’ve solved the problem. Does anyone else have this problem? I think it’s going to be a short-lived engine. It has only 80 hours on it now.”
“Our 1997 Chevrolet Cheyenne 3/4-ton pickup equipped with a Vortex V-8 engine has been a dream. No problems after 3,700 miles. It can easily pull a low boy trailer loaded with equipment.
‘My 1992 Deere Gator is one of the greatest labor savers on the farm. I use it for checking, mending, and building fence, taking tools to the field for repairs, and just for getting around our West Virginia hills. It’s also a wonderful toy for our grand kids.”
They like their 4 by 2 Deere Gator. “When we bought it our first reaction was, ‘Why didn’t we get one sooner?’,” says Lois. “Health problems made this purchase imperative for Ralph. We use it all the time and will probably have it until our ride in a hearse. This fall wil be Ralph’s 58th year to combine grain.”
“My 1990 Case-IH 1640 combine was simple to maintain and had only one minor breakdown in six years . I liked it so much I traded it for a Case-IH 2144 combine. “My 1993 Deere Gator works great. I put more hours on it every year than I do on my tractor or combine. No problems.”
Will’s impressed with his 1996 4 by 2 Deere Gator. “The 3 by 4-ft. box is handy and dumps out. We’ve had it rounded up full of dirt. It has only a small 10 hp engine but it seems to have plenty of power and is easy on fuel. We use it every day.”
John Deere 425 garden tractor
16 Best Buys5 Worst Buys“Two years ago, I bought a used 1994 Deere 425 garden tractor. I really like this little thing. It reaches places my larger compact tractor can’t reach. It came with a loader and a snow blade that are really handy. I’d love it to have front-wheel assist, but I’m happy with it for now.
“I try not to buy undesirable stuff, so I thank FARM SHOW for this ‘Best, Worst Buy’ bit. I do read it and hopefully save money because of it.”
“We’ve owned and operated a tilling and mowing service for over 20 years. We run Deere 425 tractors (a 1991 with 4,000 hrs. and a 2001 with 4,200 hrs.) that have both been repowered with Kohler engines. These are the best garden tractors that Deere ever built. Other than general maintenance, we’ve had very little trouble with them, and they’re still going strong.
“My wife owns and operates a 2004 Exmark Lazer Z HP zero-turn mower with a 20-hp. Kohler Command engine with almost 4,000 hrs. and have had almost no trouble or repairs on it. This is a well-built mower. It has the original engine, has never been overhauled, and still operates like new. I’ve replaced one belt and one bearing.
“We also own two 48-in. Walker front-mount deck mowers with the Grass Handling System (GHS). These are excellent mowers for versatility and handling, especially in tight areas, such as mowing around cemetery tombstones, trees, etc. They’re expensive but very well worth it if you want a beautiful job when you’re finished. The electric hopper dump is a wonderful feature.
“We use a 1996 Dodge Ram 1500 4x4 as our ‘workhorse’ in the business. This has been the best pickup that I’ve ever owned. It has 260,000 miles on it and has had few repairs other than a new transmission at 202,000 miles and replaced two U-joints in the front axles.”
“In 1995 I bought a used Deere 425 riding mower with 167 hrs. on it. I traded in my Deere 318 riding mower but kept the snowplow that I had used with it. The snowplow’s frame didn’t fit the new machine, so I made an adapter bracket for it. I also added a shut-off valve so I can operate both the snowplow and the mower deck without having to take either one off. This mower has more than 4,000 hrs. on it now but is still going strong.”
His Deere 425 zero-turn riding mower turned out to be a lemon. “I spent about $2,500 to keep this mower going. I had to replace both transmissions, the carburetor and manifold, and numerous spark plugs and filters but the company didn’t seem to care. I’ve always been 100 percent Deere, but not any more.”
“I haven’t had any problems with this pickup, and that’s the way a truck should be,” says Tom, pleased with his 2004 Chevrolet Silverado Z71 pickup.
“My Deere 425 lawn tractor is my worst buy, because it’s a major ordeal to get the mower started every time I use it. It’s been this way from day one. The engine starts fine but it will stall more than a dozen times before the blades engage. The dealer has been no help and charges me $50 every time he looks at it - even under warranty. He cleaned out the deck one time and replaced a defective switch another time, but the problem still persists. Now the tractor is out of warranty so I’m stuck. It’s giving me marriage problems, because I have to force my wife to use this tractor when she’d rather use my old Wheelhorse.”
“I’m well satisfied with my 1985 Massey Ferguson 1040 diesel tractor equipped with a Massey Ferguson 232 front-end loader. And I like my 1998 Deere 425 garden tractor equipped with a 54-in. mower deck. Both tractors are well-built and have required only routine maintenance.”
On the minus side, “The transmission on my 2001 Ford Escape failed at 51,000 miles. It happened when I was 250 miles from home and after the warranty had expired. The transmission cost $3,300 to repair and was at the dealer for 2 1/2 weeks. I also had to spend $400 on a rental car while the vehicle was in the shop. I immediately replaced the Ford with a 2003 GM Envoy, which I really like. However, just in case anything goes wrong I bought it with an extended 100,000-mile warranty.”
“My worst buy is my 1999 Deere 425 all-wheel-steer mower equipped with a 60-in. deck. I’ve put only about 200 hours on it but have already had problems with the camshaft and throttle knob, as well as the valve cover gasket. Also, the taillight assemblies won’t stay inside the fenders. Another aggravating problem is that grass clippings accumulate on the tractor’s screens and on the platform. Also, whenever I use high lift blades the mower leaves 1-in. wide uncut grass strips at each blade overlap.
“Mowing in wet conditions with this mower isn’t possible because clippings immediately accumulate on the underside of the deck. Even in dry conditions, clippings have to be removed after each mowing. You have to raise the front end of the tractor with an overhead hoist and then use a putty knife to remove the caked-on clippings, a process that takes about 15 minutes. I expected better performance, quality and reliability in an $8,000 machine.”
“In a recent issue I read about someone dissatisfied with their Deere 425 riding mower. I was worried because I took delivery of a 425 that very same day,” he says. “But green paint did not let me down- I have found it to be a quality product. Especially useful is the all-wheel steer with power steering,” says Moege. “It makes mowing in tight places easy.
“The Deere 425 is an all around excellent product with solid engineering and great maneuverability. It’s my best buy.”
“My Deere 425 riding mower equipped with a 54-in. deck is my worst buy. I wish I could get my money back. The deck works well when it’s clean, but it takes only a short time for grass to begin sticking to the entire inside part of the deck. It’s too much work to remove the deck so I bought a small electric winch and mounted it on front of the mower. Now when I’m done mowing I hitch the mower to a heavy tree branch and raise the front end of the mower to a vertical position so that I can easily hose it off. To power the winch I replaced the rig’s original small battery with a larger car battery. Now I don’t swear at the mower nearly as often.”
“My 1996 Deere 425 riding mower is my best buy. It starts and runs like new and does every job we ask it to do. It’s also a pleasure to drive. I’d buy another one if something ever happened to this one.”
“It cuts the grass very evenly and turns short so it has great maneuverability,” says Darrell, pleased with his 2001 Deere 425 lawn and garden tractor.”
“My 2000 Deere 425 garden tractor is my best buy. I owned a smaller Deere garden tractor for 10 years before I bought this model. It still has the same great quality.”
“My 1993 Ford 5610 II tractor equipped with wide rear tires and an extra flow hydraulic pump is a best buy.
“My Sears Craftsman high wheel trimmer is my worst buy. The problem is that it leaks oil. I should’ve known better because I had previously owned a Sears riding mower which needed repairs almost every week. However, when my DR trimmer finally wore out I decided to try Sears one more time, which was a mistake.”
“I’m unhappy with my 1993 Deere 425 riding mower. It’s priced like a Cadillac but runs like an old Ford. The water-cooled engine is supposed to have 20 hp. The company brags about how many acres per hour this mower will cut, but for every acre I’ve cut, I’ve had to spend another hour blowing trash out of the radiator. Does anyone have a solution?”
“We’re pleased with our Deere 425 all-wheel steering riding mower. We have about 3 acres to mow and there are at least 150 trees of various sizes to work around. Before we bought this mower, we spent as much time trimming as we did mowing. Now we do nearly all of it in one pass. I’m amazed at how well this machine maneuvers and how easy it is for new drivers to learn to drive it. Maintenance hs been virtually non-existent, some of which is because we keep the blades sharp and the underside of the deck clean.”
A 1998 Deere 5410 4-WD tractor equipped with a front-end loader and a cab, air conditioner, and heater rates as Charles’ “best buy”.
He’s also happy with his Deere 425 garden tractor equipped with a 54-in. mower deck. “It’s a 20 hp model so it has a lot of power for mowing my lawn. It has reduced my mowing time by up to one hour compared to the 18 hp mower I had been using.
“My 1999 GM Sierra Classis 1500 series pickup has performed exactly as I expected. It’s a best buy.”
Mike’s been cutting his own firewood for 18 years and says he’s never had a chain saw as dependable as the 1996 Stihl 044 he’s using now. “I’ve always come back from the woods fully loaded, unlike some of the times I came back empty with other brand chain saws. It’s a very aggressive cutter and is easy on gas. It’s needed no repairs.”
Mike also likes his 1995 Deere 425 lawn tractor but he’s had trouble with the mower’s 54-in. deck. “In heavy or high grass, it discharges poorly. The company has tried to correct the problem and offered to buy it back from me so I can upgrade to a 60-in. deck. Unfortunately, the bigger deck is too wide for my property.”
A 1995 Ford F-150 XLT Lariat 4-WD pickup heads Ernest’s “best buy” list. “It looks good and is built with quality. It has a great paint job, drives good, and performs well for having a 302 cu. in. electronic fuel injected engine. It gets 14 to 16 mpg around home and 18 to 19 mpg on the highway. “My 1996 Deere 425 all-wheel-steer riding mower equipped with a 60-in. deck is the best mower I’ve ever owned. It gets around just as fast as a zero turn mower but rides much smoother.”
“I’m impressed with my 1996 Case-IH 7220 front wheel assist tractor. It’s the first piece of red equipment I’ve ever owned. So far it has performed beyond my expectations. It has a lot of power, is fuel efficient, and the transmission runs smooth with excellent gear selections. It has a nice cab with good visibility, a wide door, and easy-to-reach controls. It’s not often you can buy something new without having a few problems. But after one year and 400 hours, no problems. I couldn’t have finished plowing last fall without the front wheel assist.
“My 1995 Deere 425 all wheel steer riding lawn mower equipped with a 54-in. deck is easy to use and is comfortable. We had a couple of minor problems on it which the dealer promptly fixed. It’s an easy machine to operate and has cut our mowing time in half.”
“I’m impressed with my 1996 Case-IH 7220 front wheel assist tractor. It’s the first piece of red equipment I’ve ever owned. So far it has performed even beyond my expectations. It has a lot of power, is fuel efficient, and the transmission runs smooth with excellent gear selections. It has a nice cab with good visibility, a wide door, and easy-to-reach controls. It’s not often you can buy something new without having a few problems. But after one year and 400 hours, no problems. I couldn’t have finished plowing last fall without the front wheel assist. “My 1995 Deere 425 all wheel steer riding lawn mower equipped with a 54-in. deck is easy to use and is comfortable. We had a couple of minor problems on it which the dealer promptly fixed. It’s an easy machine to operate and has cut our mowing time in half.”
“I like my 1994 Deere 425 all wheel steer riding mower. It runs good and cuts great. It’s in a class by itself.”
Terry Senstrum, Elko, Minn.: A 1993 Deere 425 riding mower equipped with a 60-in. deck and all-wheel-steering tops Terry’s list of best buys. “I can mow my 4 1/2-acre yard in 3/4 hours now. The V2 engine is quiet and has lots of torque. I can cut around trees easily thanks to all-wheelsteering.”
John Deere 9500 combine
18 Best Buys2 Worst Buys“My Deere 9500 combine has been trouble-free and is a nice machine to operate. The cab is really comfortable.”
“It’s well built and has a lot of capacity,” reports Paul, pleased with his 1997 Deere 9500 combine. “It has required only scheduled maintenance service. We use it equipped with a 25-ft. platform and 6-row head which it handles with relative ease and with very little grain loss. This machine replaced our Deere 7720 Titan II. The dealer said I would be amazed at the difference between the two machines, and he was right. Overall, I’ve had good luck with anything green.
“My 2001 Dewalt 14-volt cordless drill is my worst buy. It works good, but the batteries don’t stay charged very long so you have to buy new ones frequently, especially if you use the drill hard. We keep a couple extra batteries on hand at all times.”
“My Milwaukee 7-in. side grinder is my best buy. After two years of heavy use, it shot sparks out of the motor vents and lost power. I boxed it up and sent it to a company service center. In less than a week they sent it back to me prepaid with a new armature and brushes. It was covered by the warranty so they didn’t charge anything. Milwaukee power tools may cost a little more, but they’re definitely worth it.
“My Deere 9500 combine, which I bought used, is my worst buy. The company found out they had some combines with soft crank-shafts under the straw walkers and implemented a cost-share program to replace them. It turned out the previous owner didn’t participate in the program so the combine sat on the dealer’s lot for most of the program’s duration. We used this combine for two years before we even knew about the crankshaft problem. By the time we found out about it, the program had expired and the dealership changed hands. Our only recourse was with the company, but a factory block man said he couldn’t help us. We’re disappointed the company wouldn’t stand behind this product.”
“We bought a Case-IH 12-row no-till planter equipped with an Orthman hydraulic drive and Rebounder seed furrow closing attachments on it. The Orthman hydraulic drive lets us change population rates on-the-go and results in a more uniform seed drop. The Rebounder seed furrow closing attachments (Schaeffert Mfg. Corp., Inc., Rt. 1, Box 157, Indianola, Neb. 69034 ph 800 382-2607) pass above the bottom of the seed trench without putting pressure on the seed. It results in a quicker and more uniform germination, especially on clay ground. They also work well to apply pop-up fertilizer.
“My Deere 9500 combine does a wonderful job and has been trouble-free.”
“My 1987 Ford Taurus car is my worst buy. The engine tended to vapor lock whenever the weather got warm. I fought this problem for years. Finally I traded it for a Chrysler model which has been trouble-free.”
James likes his 1997 Deere 9500 combine equipped with a 235 heavy duty engine and new 925 flex header. “This machine is equipped with Contour-Master, a lateral tilt system that keeps the flex head at the proper angle to the ground for uniform cutting and feeding of the crop. The combine is well built, reliable, and has good resale value.
“My wife’s 1997 Chevrolet 4-WD S10 Blazer is a nice vehicle, but at 13,000 miles the transmission failed completely. The dealer installed a new transmission under warranty. Everything is working okay on it for now.”
John’s the owner of three 1996 Deere 9500 combines and says they’re all “best buys”. “They’re beautiful machines to operate and do a great job when they’re not in a real heavy crop. When they’re pushed hard, they tend to throw grain over the straw walkers. Another problem is that after extended use the splines on the wobble box sickle drive wear down and tend to vibrate. To solve the problem you have to replace the entire wobble box. Overall, these combines are highly reliable and have a high resale value. I bought three identical models because parts, repairs, maintenance, and training are easier when all combines are the same.”
“My 1995Deere 9500 combine is equipped with a self-leveling header which is a big improvement over the old stationary header. It probably saves about 2 bu. of soybeans per acre.”
“MyDeere 9500 combine has outperformed all my expectations. I like it better than other International, Gleaner, and Deere models I’ve used in the past. I’d recommend it to anyone. “My Deere 4240 tractor equipped with a front-end loader is also a best buy. It starts easily in cold weather and has plenty of power for the jobs I use it for.”
Michael Mechem, Clarion, Iowa: Michael says he wouldn’t run a Deere Maximizer combine without a Schwerin concave and finger grate like the one he installed for harvest last fall (Schwerin Concaves, Inc., Rt. 5, Box 314A, Walla Walla, Wash. 99362 ph 800 468-1888 or 509 525-7556). “We bought a Deere 9500 Maximizer a few years ago and all we ever did was grind grain and put it out the straw walkers. Deere factory reps and our local dealer worked and worked to remedy the problem with no success. The Schwerin concave made a dramatic difference, and we're extremely pleased. We've got more capacity, no grain loss, and no more ground grain.”
C. Tim Bishop, Queenstown, Md.: “My 1993 GM 2500 2-WD Suburban with a454 cu. in. engine is my best buy. I installed a set of Thorley headers equipped with a Walker Super Turbocharger muffler and a reprogrammed Hypertech computer chip. I got 11 to 12 mpg towing a 24-ft. race car trailer and 15 mpg without the trailer while hauling 7 passengers or 30 bags of seed corn. I'll pass up anything on the road and has the style and comfort of a luxury automobile. It also has great resale value. However, I wish ithad remote electric door locks and heated side mirrors. “My 1993 Deere 7200 6-row, 30-in. vacuum planter is equipped with Yetter residue managers. It's easy to adjust and plants accurately. Last year I had my best ae > orst Buys ious page) stand of no-till corn ever. “My Deere 9500 combine is equipped with Pixall snapping rolls that eliminate the need to chop corn stalks (Pixall Mfg., Clear Lake, Wis. 54005). The rolls have 10 sharpened, chrome-plated knife blades that intermesh to grip corn stalks and weeds, pulling them down through the snapper plates and crimping them for faster decomposition, We use a Deere 750 no-till drill to plant notill soybeans in untouched corn stalks the following year. Both the combine and drill do an excellent job and have good resale value.”
Richard Arsnman, Payson, HL: “I'm well-satisfied with my 1992 Case-IH 7120 tractor equipped with front wheel assist. It has a lot of power and traction, a quict cab, convenient controls, and an 18-speed powershift transmission that makes ita pleasure to operate. “T like my 1991 Deere 9500 combine with rear wheel assist. It walks right through soft fields where others would bog down and has the power and capacity to handle high yielding crops fast and efficiently. It can be adjusted to save more grain than any other combine I’ve ever used.”
Kenneth Frank, Minonk, Ill.: “My 1991 Deere 9500 combine is a pleasure to operate. It has a large, quiet cab and plenty of power. No problems. “The Deere 750 no-till drill we rented last year did a good job.”
Jim Clark, Carson, Iowa: “My worst buy is my Deere 9500 combine. It doesn’t have enough power to unload on-the-go and doesn’t clean the grain as well as the International 1460 that I traded in.”
Kenneth Mersch, Eagle Grove, Iowa: Kenneth is pleased with his 1991 Deere 9500 combine but says it could use a few improvements, “The cylinder separating performance is better than on my old Deere 7720, and I like the way the rear-mounted engine balances the combine. However, I have trouble unloading grain into the middle of grain wagon because I have to stay 6 to 8 ft. farther away than I did with the 7720. A mirror on the end of the auger might help. I had trouble learning how to operate the new controls, but it’s no problem now. There was an oil leak on a sensor that my dealer immediately repaired. I’m satisfied with the corn header, I added corn savers at each end and a cover over the feederhouse in the middle. The 20-ft. bean head is equipped with poly skids and a Tiger Jaw sicklebar. The header works well but could use better flotation in soft soil. I wish the corn head could chop stalks.”
Cecil Butler, Manotick, Ontario: “My 1990 Deere 9500 combine does a great job in corn, soybeans, and small grains and is a real comfort to operate. Itthreshes clean and loses very little grain out the back.”
Allen Baugh, Glendale, Ky.: Allen's impressed with his 1989 Deere 9500 com“It has plenty of power and capacity and threshes grain clean.” bine that has more than 500 hours. “It works so much better than other combines we’ ve owned, including a rotary combine, that we couldn’t believe it. Itcan be adjusted easier in the yard than other combines can be adjusted in the field, We're seed producers so we think we know good harvesting results when we see them, Soybeans harvested by this combine run from 88 to 90% of total delivered weight put in the bag to sell. This is true even though our crop is custom cleaned by a conditioner that’s equipped with gadgets such as a gravity table.”
Ronald Limon, Coweta, Okla.: Ronald’s “best buy” is his 1989 Deere 9500 combine. “It’s easy to service and has plenty of power. It doesn’t lose grain and it produces a cleaner sample than any other combine I've used. “My 1989 Deere 4455 tractor has more power than my 4640 and uses less fuel than my 4430 did.”
Donald Guetter, Wabasso, Minn.: “IT can'tsay enough goodabout my 1989 Deere 9500 combine, Last fall was the mostenjoyable harvest season I ever had.”
Steve Weisbrod, Canastota, N.Y.: Steve nominates his Deere 9500 combine as his “best buy”. “Its threshing capacity is awesome. A 6-row corhead really isn't big enough for this combine,” His 1990 Deere 7200 12-row com planter isalsoa“bestbuy”. “It’s more convenicntto adjust and service than the Deere 7000 planter I had owned, The automatic marker control works well, but wish it had manual control.”
Andrew Spencer, Arkport, N.Y.: “My ‘best buy’ 1990 Case-IH 900 6-row corn planter works great. I used it to plant nearly 900 acres last spring with only a few minor problems.” Andrew says his 1989 Deere 9500 combine “has tremendous capacity. I felt it was somewhat underpowered, bul the company has solved the problem.” Ronald Bersie, Waverly, Minn,; “Itcuts down and tangled hay with ease and makes anice windrow,” says Ronald, pleased with his 1990 New Holland 499 hydro swing haybine.
John Deere 9600 combine
18 Best Buys2 Worst Buys“I’m happy with my 1992 Deere 9600 combine which I use on our 2,300 acres. This machine has a lot of capacity and is well built. Very little downtime. It’s a pleasure to operate.
“I was disappointed with my 1996 New Idea 4865 round baler. The company used splined bearings on all the rollers, which caused nothing but trouble and usually ruined the rollers as well. I finally traded the baler in for a New Holland 688.”
“I like my 1997 Chevrolet heavy-duty 1/2-ton pickup, especially the newly-designed power steering. It rides and drives excellent.
“My 1999 Sudenga 10-in. dia., 71-ft. long grain auger is well made and has a flexible hopper that’s easy to use.
“I like my Deere 9600 combine. I use a 30-ft. platform on it to harvest soybeans. My only complaint is that the machine is underpowered when harvesting beams with tough stems.”
Duncan’s impressed with his E-Kay hydraulic bin sweep (E-Kay Enterprises, Sedgewick, Alberta). “It’s advertised as a bin sweep that you can use either on your auger or mounted inside the bin to fill an under-floor auger. The company says it won’t climb a pile of grain and that its curved back allows it to clean right down to the floor while you stand outside the bin and out of the dust. Well, it works like they said. We think it’s the best sweep we’ve ever used.
“We’re reasonably pleased with our 1993 Deere 9600 combine but wonder why Deere made two design changes on it. We had a 1990 Deere 9500 model that had an easily adjustable control panel that you moved up and down by simply moving a spring-loaded pin. It also was equipped with a beater grate with two spring-loaded pins that made the grate easy to raise and lower. However, on the 1993 model they changed the design on both of these items which makes for two gruesome, time-consuming jobs. Another problem is with the metric nuts and bolts they use. They are odd-size metric sizes that most companies don’t use - 13 mm, 15 mm, 18 mm, and 21 mm. It seems odd to me that a company that’s supposed to be so interested in its customers would strive to give you less for more money and then add to your grief with all these funny-sized bolts and nuts.”
Alan has good things to say about his 1995 Deere 9600 combine equipped with a heavy duty front axle and 20.8 by 42 radial dual tires. “It’s an excellent machine that’s comfortable to operate and has had very few maintenance problems. It performs phenomenally in corn and also very well in wheat and milo. I really like the Deere-made dual wheels. In row crops the tires stay between the rows, allowing the machine to almost drive itself. The first year we used it we had a wet summer, so when I went to cut wheat I let the air pressure down in the tires to where they were pretty ‘cheeky’ with a load on. However, even with a 30-ft. platform and a full 350 bu. grain tank (it’s equipped with a Mauer tank extension), the combine was able to stay on top of the ground and keep going while I would look around and see my neighbors’ 9600s mired down with their 30.5 by 32 tires. The ground was so wet that my 95-ft. Deere 8400 MFWD tractor had trouble pulling even a half-loaded 840 grain cart around. “I’m also well pleased with the Deere 8400 tractor. It’s a real horse.“
“Our two 1996 Deere 9600 combines work well even in weedy fields and tough conditions. We recently bought two new Deere bean flex heads for them that also performed well. My only complaint is that they need to improve the slip clutches and also make the augers out of heavier material. “We recently bought two 1997 Case-IH 2188 combines and like them, too. We’ve operated IH and Case-IH combines ever since 1980 and have had good luck with them. Company support has always been good. I do think the company needs to enlarge the feederhouse on these particular models. We use all of our combines to harvest wheat, corn, soybeans, sunflowers, milo, millet, and oats.”
“Our two 1989 Deere 9600 combines are our best buys. We’ve used them to harvest more than 2 million bu. of crops. Each one has more than 2,700 hours on it with very little downtime.
“We’ve also had good luck with several Versatile tractors made from 1980 to 1988.”
Clinton owns three 1996 Deere 9600 combines and says they’re all “best buys”. “They’re very reliable and work good in a wide variety of crops and conditions. I do wish they had more cleaning capacity which would allow higher ground speeds. Another problem is that the crop proving operator comfort.”
“I’m well satisfied with my 1995 and 1996 Deere 9600 combines. They do a fantastic job in all conditions and consistently produce a clean threshing sample. They’re comfortable to operate and are trouble-free 98 percent of the time. There’s no need for Deere to be in a big hurry to change - they already have the best combines on the market. “One problem is that the button that ac-
“I like my 1994 Deere 9600 combine equipped with a Deere 930 30-ft. platform header.”
Lane likes his 1990 Deere 9600 rear wheel assist combine. “It hasn’t had much downtime and is easy to adjust and maintain. However, the bearing assembly on the straw walkers requires about a tube of grease every day. One of the straw walkers broke at about 1,400 hours, but that was the first time we were kept out of the field for more than an hour or two. My dealer had a new straw walker in stock and had it installed within five hours. The straw walker system is the weak point of this machine. I like the header - it stands up to the abuse of driving on terraces and ditches. I mounted a Vittetoe chaff spreader on back and it works good, too.”
“Our best buy is our 1995 Honey Bee SP36 36-ft. header (fitted with a 112 pickup reel) which we mounted on our Deere 9600 combine. It’s easy to operate even in hilly, rough fields and adds many acres and bushels to the capacity of our combine. It’s exceptionally well designed and built. Also, it’s easy to take off for transport.”
Jimmy Powell, Medford, Okla.: A 1993 Rhino 15-ft. flex mower rates as Jimmy’s “best buy”. “The first day I used it, a hydraulic cylinder leaked. 1 called the dealer and in two days had a complete new cylinder direct from the factory. I use it on roadsides, waterways, pastures, and CRP acres, It’s an excellent mower and does a nice level job. The entire mower raises up at the same time and has four gearboxes. “Lalso like my DTN 6001 color computer data system The information and weather programs offered are invaluable. “I looked at a lot of other pressure washers before I bought my Alkota 4182. It’s well-built and is made with metal and stainless steel instead of plastic like some other models. I highly recommend it. “My Brent 670 grain cart empties out almost completely. Coupled with a ShurLock roll-over tarp and my Deere 9600 combine, my harvest speed has increased greatly.”
Arlen Bonde, Kathryn, N. Dak.: Arlen nominates his 1989 Ford TW-35 front wheel assist tractor as his “worst buy”. “Judging by the way they designed the radiator screen, they must have thought this tractor would be driven only on the highway. There are big gaps on the corners of the screen that let in pieces of straw. Also, pieces of straw kicked up by the front tires get sucked in under the fuel tank. On windy days I have to clean out the radiator two or three times. “The air filter design inside the cab is a joke. The filters are secured by small plastic holders, but there’s no way to adjust them to get them tight and so much dirt gets sucked into the cab that it won't stay clean, One of the plastic holders broke, allowing a filter to fall out, and I accidentally drove over it with the tractor. “The engine leaked oil and anti-freeze onto the front wheel assist driveline and made a mess. The seat is poor quality and ripped after only one year. The tractor is underpowered and uses too much fuel. The transmission gears are so close to each other in speed that one third of them are useless. The hydraulic levers are poorly positioned and won’ t stay in their proper settings. The hydraulic system leaks a gallon of oil per day. The tractor was supposed to come with a 3-year warranty, but our dealer wouldn't ninate suys fix anything without charging us for it. The adjustable steering wheel is located so far from the seat that I have to lean over toreach it. If I slide the seat ahead so I can reach the steering wheel, my knees hit the dash, “My Deere 4760 tractor is my best buy. It's rated at only 5 hp more than the Ford TW-35, but it can pull everything 1 mph faster and uses much less fuel. I had a few small problems with it, but my dealer fixed them at no cost. Deere tractors cost more to buy, but at resale you lose twice as much with a Ford. “My Deere 9600 combine is a best buy. It's a quiet machine, and daily maintenance is faster than on any other combine I’ve ever used. We combined all year without any down time.”
Barry L. Bernard, Leland, Ill: “Our 1991 Deere 9600 combine is the best designed and best engineered combine on the market. We have a 25-ft. platform on it but feel that it probably should have a 30-ft, platform to keep it going at full capacity.”
Butch Turner, Tichnor, Ark.: “In 1989 my brother and I made the worst mistake of our lives when we bought a Deere 9600 combine. It wastes more rice (over the walkers) than any other combine made. Company representatives told us to buy a new CTS model, but itcosts about $120,000. We have six Deere tractors and wouldn't buy any other brand. But Deere made a big mistake when they put the 9600 on the market and they know it. Why else would they have made the CTS so soon after they introduced the 9600? I believe Deere let us and their other customers down big time.”
Robert Schultz, Columbus, Kan.: Robert’s impressed with his 1991 Deere 9600 combine. “We had a lotof rain so field time was cut rather shori last year, but the 9600 definitely speeded up our harvest. It does remarkably well in wet ground. I think that was what surprised me the most. It’s quite a machine.”
Kevin Stewart, Big Valley, Alberta: Kevin's pleased with his 1990 Deere 9600 combine that he uses in small grains. “Unlike the 9500, the 9600 does what it’s supposed to. It has big capacity, but the biggest improvement over the 8820 is even air distribution over the shaker shoe. For two years now we've basically set it once and never needed to make any more adjustments, It still has a problem saving barley like all conventional combines. Cab and operator comfort is second to none. The fuel tank could be moved some place where chaff doesn’t circle around. The walkers could also do a better job of separating barley from the straw. If I were in the market I’d buy another one because we need straw for our cattle and a rotary combine can’t fill this need.”
Bill Meismer, Varna, Ill: “My 1990 Deere 9600 combine has enough capacity for any size corn head. It’s very easy on the operator.”
Jerry Wiford, Bellefontaine, Ohio: "My 1989 Deere 9600 combine has great operator comfort and controls, a very quiet cab, and more capacity than the 8820 Titan II."
Dennis Wagner, Gilmore City, Iowa: “T've had very few problems with my Deere 9600 combine on 2,500 acres. We're very happy with this best buy.”
John Deere 4440 tractor
15 Best Buys3 Worst Buys“I like my Massey Ferguson 135 diesel tractor, Deere 4440 tractor, Gnuse 3-pt. mounted forklift, Honda generator, and Stihl chainsaw. They seldom break down and are easy to repair.”
On the negative side, “Hands down, our worst buy was a Staber clothes washer. It didn’t clean our clothes, and maintenance was also a problem. We had to replace the bearings, pump, a hose, pulley, belt, and motor, and we had electronic problems.
“Replacement parts for this machine are ridiculously expensive. For example, the pump is imported from Italy and the belt that drives it is one-of-a-kind and is available only from the company. Every time I call the company they accuse me of oversudsing, which seems to be the explanation for all the failures on this machine. Also, the company isn’t helpful about how to stop the machine from jumping around and making a lot of noise. Toward the end, the struts needed to be replaced; however, the frame was rotting out so instead we got rid of the machine.
“I got holes in my clothes from the very first time I used this washer. I think the door design on the basket was to blame. It was a stainless steel basket that came with a 20-year warranty, but it was already rusty after only 4 years.
“I now own a Speed Queen clothes washer which I bought used. I replaced the pump on it for $40 and the belt for $20. Best of all, now my clothes are clean again.”
“I think my 1980’s Deere 4440 tractor is one of the best tractors Deere ever built. Routine maintenance is all it has ever needed.”
A 1982 Deere 4440 tractor rates as Bryce’s “best buy”. “It has more than 10,000 hours on it with only a few minor problems. Always starts.”
“I bought a used 1980 Deere 4440 tractor with about 7,000 hrs. on it, and the first year I had to replace both wheel rims. Also, the hydraulic pump leaked, and the top of the radiator expanded. At 8,200 hrs., a bearing on the transmission’s low range went out, and the transmission wouldn’t shift into any gear. To fix these problems I had to spend $4,400 worth on parts and $3,800 on labor. Also, the lines on the air conditioner rusted out, and I had to rebuild all three of the tractor’s hydraulic couplers.”
“I’ve been impressed for a long time with my 1980 Deere 4440 tractor. We used it to do all our fieldwork for the first 10 to 12 years. When my son bought a bigger tractor I mounted a Deere 740 front-end loader on the 4440 and used it that way for about 10 years. Now the 4440 has about 26,500 hours on it, yet the engine has never been touched. We use this tractor to do all our baling and over the years have worn out 3 sets of tires on it.”
In 1983, Gary bought a 1980 Deere 4440 tractor used with 1,200 hours on it. “This tractor now has almost 8,000 hours on it but has required only minimal repairs, and the engine still doesn’t use a drop of oil. Even though I do a lot of loader work with this tractor it still has the original clutch. Looks and performs like new.
“My 1993 New Holland 415 discbine is my worst buy. It worked well for two years, covering a total of about 700 acres. Then the same splines in the transmission gearbox sheared off. We got it fixed and two hundred acres later the same problem happened again. The machine was still under warranty so the company paid for it again. One hundred acres later the same shaft failed a third time. Every time this problem happened we lost about a week of downtime. We finally traded the machine in for a Deere 935 discbine, which has worked a total of about 3,000 acres and still works perfectly.”
Ed’s the pleased owner of a 1981 Deere 4440 tractor. “We’ve never touched the engine even though it has more than 8,000 hours on it. It doesn’t use any oil and runs just as good now as the day we bought it.
“My 1994 Convey All drill fill auger is poorly designed and is my worst buy. The slide cover that’s used to clean out fertilizer was difficult to move and had a weak handle that would bend. As a result I had to use a hammer to close the slide.”
Tom has had good luck with his 1996 Dodge 3/4-ton pickup, putting 136,000 miles on it in dusty, rough conditions and mud.
However, he does have one complaint. “They should put a better air filter system on the engine. It’s definitely a Mickey Mouse set-up. The second week I had it I got dirt in the engine so I took it back to the dealer. He told me Dodge sometimes had trouble getting the air filters sealed and that a little dirt wouldn’t hurt anything. I told him it certainly doesn’t do any good, either.”
Tom added extra leaf springs to the truck’s suspension so it rides more like a 3/4-ton pickup.
Another of his “best buys” is a Deere 4440 tractor he bought new in 1981. “We haven’t had any trouble with it in thousands of hours of use.”
“I’m well pleased with my new Kongskilde 3500 23-ft. tandem axle cultivator. It’s equipped with light H clearance tines, single point depth control, goosefoot teeth, KNA arms with rolling harrows, and a 5-bar front. It does excellent work and doesn’t plug up easily, and the tines are well spaced. It makes the best seedbed we’ve ever had. “We’ve had a lot of problems with our 1991 Deere 4440 tractor. The starter is underpowered and has difficulty starting the tractor. Another problem initially was that the lights would quit working at night every few minutes and I had to sit and wait 10 minutes or so before they came back on. Also, the heater and radio didn’t work. Eventually we discovered the problems were due to an improperly tightened power bar connection under the dash cowling. “The windshield shattered while my other son was using the tractor to incorporate herbicides. The next year I was using the tractor to chisel plow when the front end shot over to the right. The hub bolts had sheared off on the right rear wheel - the axle was turning but the wheel wasn’t. The shear bolts had discoloring that showed they were defective. I called the dealer and he said the shearing problem was our fault. He finally ended up paying half the repair cost. “The seat has a lever for controlling the ride from soft to hard, but this tractor rode like an old steel-wheeled wagon no matter where the lever was set. New parts were installed to try to improve the ride but they didn’t help. Finally it was determined that the adjustment lever rod was defective. “The cab leaves a lot to be desired because it’s small and hard to get in and out of. My sons and I have all hit our heads several times on the rear window while turning around to back up and hitch up to an implement. This cab is made for 5-ft. tall, 100-lb. people, not 6-ft. 3-in., 200-lb. people. It does have a lot of power but it burns a lot of fuel. It also has a poor steering system that lets it wander all over the road. This tractor has been a real pain for five years.”
Alan’s the satisfied owner of a Gnuse 3-pt. mounted loader bucket. “It’s built heavy and can be hooked up to a quick hitch. Works great for digging out tile stand pipes and is the best thing for snow removal I’ve ever seen. “I’m well pleased with my two Deere 4440 tractors as well as my Deere 4455 and 7800 tractors. They’re reliable and have made my job a whole lot easier.” He’s not as happy with his 1996 Kinze 2500 8-row planter. “I had trouble with oil-impregnated bushings that are used to turn the insecticide boxes on and off. They turn so hard that the main planter shaft twisted off instead of the cotter key that should have sheared. I have a lot of friends who own the same planter and have the same problem. It has caused me a lot of downtime. Otherwise I like the planter, especially the fold-down markers, the top drive, and the simplicity of design. It’s amazing how what appears to be a small problem can turn into a big headache when you’re trying to get a crop in.”
Alan’s impressed with the Selectro row shutoff he bought for his Case-IH planter (Selectro Co., Box 226, Avon, S. Dak. 57315). “I farm on contours so I have a lot of point rows, and with no-till I don’t cultivate so I have to be able to shut off the planter on point rows. The row shut-off lets me stop planting as I enter point rows. It saves seed and prevents overpopulation of the crop. I still cultivate end rows to eliminate double planting. “My 1980 Case 2290 tractor is my worst buy. The rear end and transmission each went out twice. All of the steel hydraulic lines broke and I lost 20 gallons of oil every time a line broke. Also, the fan went through the radiator. After the warranty expired I traded it in for a Deere 4440 tractor. The Case company spent over $6,000 on repairs during the warranty. They closed several stores which doesn’t help for service.”
“Our 1994 Case-IH 7130 Magnum tractor is our best buy. We bought it used with 300 hours and now it has over 2,000 hours with no problems. It’s our most economical tractor.
“Our worst buy ever was a 1981 Deere 4440 tractor equipped with a powershift transmission. We had it for four years and put 1,500 hours on it. The biggest piece of equipment it pulled was a 21-ft. Deere disk, but it still went through five different transmissions.”
Two of John’s “best buys” are a 1979 Deere 4440 tractor and a 1993 Deere 3950 forage chopper. “The tractor has plenty of hydraulic power, shifts easily, and is a pleasure to drive,” he says. “The design of the forage chopper is simple, making it easy to maintain. It does a great job chopping material.”
Wyatt Priestley, Greenfield, Tenn.: “T've had very few problems with my Deere 4440 tractor. It’s reliable and does everything we ask of it.”
Bryan Gibson, Gormley, Ontario: “It's the best tractor I've ever owned,” says Bryan about his 1980 Deere 4440 tractor. “It has 4,600 hours and has done every job on our farm. It’s gone through two water pumps, two alternators, two sets of batteries, one neutral start switch, and a pair of front tires. Other than that, it's been trouble-free. “My 1990 Yetter 6600 RT coulter cart with cultivator-packer that I use to pull a 3pt. grain drill simply didn’t work. It was shipped withoutsetup instructions and short on parts. Once in the field I knew why only two units had been sold in Ontario up until that time. From front to back it was poorly designed. The hitch wore out after only 300 acres. The packer was so heavy it pushed dirt in frontof it and the tractor couldn't pull it. After two years I gave it to a dealer for a nominal fee. Now he can’t sell it.”
Keith Lilley, Otego, N.Y.: “My Deere 4440 tractor has lots of power, starts good, and hauls loads up or down hills with ease.”
Roger E. Schnell, Amboy, Il.: Roger is the owner of a 1991 Chevrolet K2500 3/4ton, 8,600-Ib. capacity heavy-duty pickup. I's equipped with a 350 cu. in. engine and 4-speed automatic transmission, GR-24516 tires, and has a rear axle ratio of 4:10 to 1. “Everything about it is fine except for the fuel economy. We get 10 mpg on short trips and maybe up to 12 mpg on long trips. Big semi trucks get nearly as much mileage pulling 72,000 Ibs. of gross weight.” On the "best buy" side is a 1979 Deutz DX-140 tractor bought used with 3,000 hours. "After rebuilding the fuel pump and injectors we're very pleased with it . The 140 hp engine is very easy on fuel and the cab is comfortable. The entire tractor is designed well, The best part was that it cost $10,000 less than a comparable Deere 4440 tractor.”
Kenneth Rickels, Mendenhall, Miss.: “I bought a used Deere 4440 tractor with cab and air conditioning in 1986, and it’s a best buy. “I heartily recommend the Deere 245 quick-tach front-end loader that I bought several years ago. I couldn't do without it. I use the bucket to haul manure, dirt, trash, etc. I use the forks to pick up small logs, brush, tree limbs, and to lift posts ouf of the ground, also use it to haul, lift, and stack 1,200 to 1,400-Ib. bales in our shed and to move gates and hay feeders, When we built our new house we used it to lift bundles of shingles up to workers on the roof, and when we built our hay shed we used it to lift building materials, tin, etc, made a pallet that mounts on the loader or on the rear hay lift so that when I’m building or mending fence I can carry wire, stretcher, nails, and tools.”
John Deere 455 diesel mower
15 Best Buys3 Worst Buys“I love my Deere 455 diesel mower with a 60-in. mowing deck. I have the all-wheel steer model, but I don’t think it’s worth it. I only mow about 1 acre, but still enjoy the fuel mileage.”
“I bought my Deere 455 diesel all-wheel-steer tractor used, equipped with a 60-in. mower deck and with about 70 hrs. on it. Now it has about 1,300 hrs., and I’ve replaced only the battery and mower blades. This tractor is easy on fuel and has a lot of power. The differential lock works great for getting around tight corners.”
Robert’s happy with his Deere 455 rear-wheel-steer lawn tractor. “I use it to mow 4 acres with a lot of buildings and trees on it. The rear wheel steering lets me get in and out of tight spots.”
He’s disappointed with his Sub-Zero 550 refrigerator-freezer. “The thermostat on it has been replaced 4 times. The freezer is supposed to be frost-free but has never worked right. I had to spend money to add a drain heater and a heater for a refrigerator button (a factory modification). I thought I was buying the best, but instead I ended up with a poorly engineered lemon.”
“My 1998 Deere 455 garden tractor equipped with a 22 hp Yanmar diesel and 60-in. belly mower. It has more than 900 hours on it with no problems. It burns only about half as much fuel as my Deere 425 equipped with a 20 hp gas engine.”
Ron likes his 2000 Deere 455 riding mower. “These mowers are tough and built to last. No problems. The diesel engine has plenty of power and is easy on fuel. Also, the deck is built rugged. I wouldn’t even look at another brand.”
“My Deere 455 riding mower equipped with a 60-in. deck and Meg-Mow disc blades (www.meg-mo.com) is my best buy.”
“My Deere 455 folding grain drill is my best buy. I use it for planting peas, soybeans and wheat. It’s well built and does an excellent job.
“Our Great Plains Discovator performs well. I’d certainly buy another one.”
A 1999 Quinstar 42-ft. Fallow Master tillage tool rates as Gary’s “best buy”. “It pulls as easily as our 32-ft. undercutter and does a much better job of killing grass.”
On the “worst buy” side, he lists his 1998 Deere 455 grain drill. “This drill is supposed to be able to handle 900 lbs. of hydraulic down pressure, but it won’t stay together even at 600 lbs. We have to check the drill every day for bad bearings and discs. During the first three years we owned it, we averaged $1,100 a year in repairs. Deere reps tell us there’s nothing wrong with the drill, but they can’t explain why the bearings and discs won’t last. We’re now looking for a different model.”
“My 1998 Deere 455 garden tractor equipped with a 60-in. mower is my worst buy. One problem is that the air intake is located low and behind the left front wheel, which allows dust and dirt kicked up by the wheel to be drawn into the air cleaner. Also, the vacuum gauge that indicates a dirty filter doesn’t work properly. The dealer says this gauge was designed to be used on larger tractors. Deere might know how to build large tractors, but it’s obvious that the people who design their small tractors have never used one in the real world.”
Mike likes his 1999 Deere 455 riding mower equipped with a 60-in. deck. “It has a lot of power and torque and is a pleasure to operate. It has about 270 trouble-free hours on it. The deck is easy to put on and take off - it takes only about two minutes. If my yard was smoother I could mow as fast as the machine would go and it wouldn’t even bog the engine down. It’s a great tractor.”
“I’m well satisfied with my 1998 Deere 455 riding mower. My wife loves to mow the lawn and won’t use anything other than Deere.”
Joe’s impressed with his 1994 Deere 455 garden tractor equipped with a 54-in. mower deck and a diesel engine. “This is our second Deere garden tractor. We also had a 212 model. Deere garden tractors hold their resale value well. The 455 model has a lot of power and cuts smooth.
“My 2000 Buick LeSabre car is a best buy. I’ve owned four LeSabres in the last 10 years. All have been dependable. The 2000 model is easy on fuel.”
On the negative side, he lists his Well Mate water pressure tank. “It’s a 1998 model that our pump man installed to replace our metal tank, which lasted for 23 years. This tank is made of plastic or some other kind of synthetic material. After it was installed our water pressure dropped by 30 to 50 percent. The installer and a plumber made repeated visits, with no results. It cost me about $1,000. I called the company but they wouldn’t help. Looks like we’re stuck.”
Jesse’s impressed with his Deere 455 Hydra-Push manure spreader. “It doesn’t have a bed chain which makes it much easier to use in cold weather than a conventional box spreader. I have to make sure that the box is cleaned out completely in temperatures below zero, but that’s easier than having to repair a broken bed chain. Also, it does a much more even job of spreading sloppy manure than a conventional spreader and will continue to spread sloppy manure when going downhill. It spreads dry pen-packed manure much better than the Knight Slinger spreader that I had been using. I like it because it eliminates the need to have two kinds of spreaders - one for liquid manure and one for pen-packed manure.”
On the “worst buy” side, he lists a fly control program for dairy farms offered by Orkin. “Under the program, the company regularly sprays your barn and/or parlor throughout the fly season. The first year it seemed to work alright, but the second year I think they were just spraying water for all the good it did. They had a so-called guarantee that if you weren’t satisfied they’d come back and spray for free.
“After the seçond time they came during the second year - with no obvious effect on the fly population - I called and complained. They never came out again. The next year they called to sign me up for the season and seemed shocked when I told them ‘no’, or something to that effect.”
Fred likes his 1995 Deere 455 garden tractor. “The diesel engine has a lot of power. It can be equipped with a smooth cutting 54-in. deck or a 54-in. snow blade. I use the blade to clear snow off my 500-ft. driveway. When equipped with tire chains and 300-lb. rear weights it can handle 3 1/2-ft. high snow drifts with no problem. It’s comfortable to drive, and after operating it for more than 200 hours I haven’t had to repair anything.” On the “worst buy” side, he lists the Fuller “Super 10” transmission in his 1997 Peterbilt semi truck. “I test drove the truck before I bought it and noticed that when I shifted the transmission sometimes made a grinding noise. The salesman said the noise would quit with more use. At this point the truck had 45 miles on it. I ran the truck for two weeks and the problem got worse. The dealer messed with it for 2 1/2 weeks before putting in a new transmission. However, it isn’t much better than the old one.”
“My worst buy is a new Deere 455 35-ft. grain drill equipped with 7 1/2-in. row spacing and V-type closing wheels. The problem is that the shoes that hold the disc openers and closing wheels break easily. We can go for only a few hours without breaking down. Most of the shoes have been rewelded. The company won’t do anything to help even though I own 10 Deere tractors and most of my other equipment is made by Deere.”
“I bought a 1994 Deere 4960 MFWD tractor and liked everything about it. Then the dealer called and said the factory had put the wrong bolts inside the rear end. They had to split the tractor apart and remove the cab. When the tractor came back it leaked oil and the hydraulic controls didn’t work. Those problems have been fixed now, but I didn’t expect this to happen on a new tractor.
“I bought a new 30-ft. Deere 455 press wheel drill and had to put two wide baler wheels and tires on it in order to keep it from sinking into the ground on turns. It should come from the factory with four large tires.”
Mike Cornine, Hughesville, Mo.: A 1994 Deere 455 30-ft. grain drill heads Mike’s “best buy” list. “One reason I purchased this drill was because of its easy depth setting feature, Hydraulic controls allow me to regulate down pressure on the coulters, The electric-over-hydraulic, independent unit ‘select lift’ allows me to lift each box independently or all three boxes at once. The drill folds for safe and easy transport.” On the negative side, Mike’s had trouble with his 1992 Dodge LE350 4-WD pickup equipped with a Cummins diesel engine. “The rear end went out twice. I had purchased the extended warranty. The first time it took three weeks to get parts. The second time, about 5,000 miles later, I chose to pay for the repairs myself because I couldn't do without the pickup for another three weeks. Parts of the passenger side floorboard under the seat broke out, and the accelerator pedal falls off frequently. The first time I loaded the pickup the suspension system sagged so far down that the tailpipe got smashed. However, do love the engine.”
Robert Hughes, Nevada, Mo.: A 1993 Deere 455 30-ft. grain drill rates as Robert's “best buy”. “We've seeded about 2,500 acres with itand the only problem has been withadrive chain -I think we ranittoo loose - and a flat tire. “My 1992 Polaris 250 2-WD ATV is my worst buy. The crankshaft broke a month after we bought it. We kept it for only one year and two months, yet we had to replace two drive sprockets, one starter, one drive belt, and three drive chains. The back pivot came loose and wore out the frame, front wheel bearings went out, and the front end was loose when we finally sold the machine.”
John Deere 3020 diesel
16 Best Buys0 Worst Buys“My Milwaukee 10-in. telescoping pole saw operates smoothly and has good reach and battery life.
“I bought a used 1968 Deere 3020 diesel. I probably paid more than it sold for when it was new, but I got a better tractor than anything else I could buy for the same price.”
“My 1966 Deere 3020 is a joy. I like the narrow front. It starts easily and is easy on fuel. I use it to mow, rake and bale.
“In 2020, I bought a Hobart stick welder at Rural King. I only did 1 lb. of small rod and melted the circuit board. Rural King wouldn’t refund, repair or replace it. I couldn’t get ahold of Hobart - their phone service is bad.”
“About 30 years ago I bought a used Jonserud 525 chainsaw which I’ve used to cut firewood and also brush when making ATV trails. The recoil housing on it broke a couple years ago and because the saw is so old, replacment parts were no longer available. Fortunately, my son went online and found a company that deals in old chainsaw parts (www.chainsawr.com; ph 802 533-2928). I was able to buy what I needed for $35 and get the saw running again.
“In 2002 I bought a used 1989 Polaris 250 Trail Boss ATV that I’m still using. I’ve replaced the starter and a broken motor mount, but otherwise this machine just keeps on going.
“In 1980 I bought a used Deere 3020 diesel tractor with about 2,000 hrs. on it. I’ve replaced the radiator, and rebuilt the water pump once and the starter twice, but otherwise this tractor has required only routine maintenance. I think the 3020 is one of the best tractors Deere ever built.”
“My 2005 Deere 9560 combine is easy on fuel and has a nice cab. It’s also fun to drive. I wish the company still made this combine.
“I love my 1972 Deere 3020 diesel tractor.”
“The engines on my IH 303 and 615 combines seem to run forever, and are simple enough in design that I can work on them by myself. I bought both combines used years ago and they’re still going strong.
“In my experience, Deere 3020 and 4020 series tractors equipped with the powershift transmission will run forever without any problems.
“Several years ago I bought a new Deere 275 9-ft. disc mower which turned out to be a piece of junk. It was welded together at the factory with the belt pulleys out of line, and as a result I had to replace several sets of $300 belts. I had a welding shop cut 1/2 in. out of the frame, which cured most of the problem. Also, the mower’s swivel shaft broke off, and I’ve had to replace several gears and bearings. I’ve spent more money on repairs than what I paid for the machine.”
“I like my 2015 LS 3033 33 hp., 4-WD loader tractor equipped with a 3-cyl. Mitsubishi diesel engine and 4-speed shuttle shift transmission (www.lstractorusa.com; ph 252 984-0700).
“My Deere 3020 is a super tractor. No problems.
“I use my 2013 Ferris 2000 series zero-turn riding mower on 5 different 1-acre yards. It’s an excellent machine.”
“I use my Ford 1720 4-WD loader tractor just about every day and it works great.
“My Deere 3020 is also a good tractor.”
“My 2002 Chevrolet Trailblazer is a wonderful vehicle. No problems.
“My Deere 3020 diesel tractor with power-shift transmission has more than 5,000 hours on it with no problems.”
“I bought a used Deere 3020 tractor equipped with a powershift transmission for my son and it works great. It had new tires and was ready to go, with no leaks anywhere. It has a lot of power for a tractor its size.”
“My 2001 Honda Foreman ES ATV, which I bought used with low mileage, is a great machine. It’s also fun to ride.
“My Deere 3020, equipped with a model 1530 loader, is a great tractor.”
“I like my 1970 Deere 3020 tractors. Over the past 15 years I’ve bought three Deere 3020’s. Two were equipped with power shift transmissions and the other with a Synchro-Range transmission. These tractors work great in hay fields because they have good brakes, excellent steering, and roomy, flat operator decks. I’ve put a lot of hours on all of them but they just keep on running, with little maintenance required. I wish the company made new tractors as good as these.”
“The gas engine on our Deere 3020 tractor was worn out so we replaced it with a new diesel engine that starts great even at temperatures down to zero and uses very little fuel. We’re well satisfied with it. It made a new tractor out of an old one. Now everyone wants to drive it.”
Two Deere 3020 diesel tractors - a 1969 and a 1970 - head Bill’s all-time “best buy” list. “Both of them have more than 6,000 hours. Over the years we’ve used them for cultivating, mowing, baling, hauling manure, powering augers, and a lot of other jobs. They’ve saved a lot of hours on our larger tractors and have had few repairs. I plan to use them for many more years.”
Bill Voedisch, Marine, Minn.: “My best buy is my 1993 Allied 594 loader that's mounted on a Deere 3020 tractor, They make a super combination. use it all year long to move snow and manure and to do landscaping work. It starts right up even in 20° below temperatures. “My worst buys are small machines powered by Briggs & Stratton gas engines. I’ve had brand new 4 and 5 hp engines fail on my lawn mower, sprayer, and rototiller, The problems were everything from a bad carburetor to dead ignitions. In the future won't buy anything powered by a Briggs & Stratton engine if T can help it.”
Olin Rairdon, Indianpolis, Ind.: Olin operates a stump cutting business using a Vermeer 2460 stump cutter and a smaller Can Do self-propelled model for grinding stumps that the Vermeer unit can’t reach. He uses a 1964 Deere 3020 tractor equipped with a Westendorf front-end loader to pull the Vermeer and hauls both stump cutters as well as the tractor on a 30-ft. gooseneck trailer between jobs. “The Vermeer stump cutter was originally powered by a Wisconsin 65 hp 4-cyl. gas engine. It kept failing every six or seven months because dirt got through the air cleaner filter. I replaced the engine with a Deutz 950 diesel equipped with an oil bath air cleaner and also mounted an in-line fuel filter in front of the fuel pump. I had the same problem with the 20 hp Kohler engine on the Can Do cutter so I replaced it with a Ruggerini MD 151-D 15 hp diesel engine equipped with an oil bath air cleaner. The engine is made in Italy and sold in the U.S. by Deutz. It developed an oil leak after the warranty expired. My dealer's mechanic found that the problem was caused by a crack in the block. He explained the problem to a Deutz representative who replaced the engine at no cost except for installation. “Engines used in dusty conditions shouldn't have dry-type air cleaner filters. My 1964 Deere 3020 tractor has an oil bath air cleaner and has been overhauled only once.”
LeRoy Toth, Elk River, Minn.: A Deere 3020 tractor equipped with a diesel engine and powershift transmission rates as LeRoy’s “best buy”. “Ithandles well and is economical for field work and loader work. There’s no better tractor in my opinion.” LeRoy’s “worst buy” is a Deere 338 baler equipped with hydraulic bale tension and bale thrower. “It ties only 80% of the time and bales aren’t uniform, Some are 30 in. long and some are 48 in. long. Some are light and some are heavy out of the same field. The bale thrower throws some bales in the middle of the wagon, some in front, and some right over the back. My dealer has been out at least 26 times trying to make it work right.”
John Deere 4240 tractor
14 Best Buys1 Worst Buy“My three best purchases are a Deere 4240, an IH 1256, and a Ford 9000. It’s…”
“My Kuhn 4000 mower conditioner is well built and comes with free life service on updates. The Kuhn service rep came to my farm with an updated bearing design at no cost to me, even though I didn’t have any problems with the machine. That’s a good company.
“My 1978 Deere 4240 tractor wouldn’t start unless the temperature was above 50 degrees, and the company wouldn’t help. I installed a high torque starter and rebuilt the fuel injection pump, but nothing helped. Finally, I bought an injection pump designed for a 4440 tractor, had it rebuilt, and installed new fuel lines to make it work. Now the tractor runs like new.”
“My 1979 Deere 4240 tractor was a best buy. I put about 4,000 hours on it before retiring from farming in 1999. I sold the tractor for about what I paid for it new, and used the money to buy a Corvette. Now that’s what I call a good buy.”
“My Aqua Ozone water treatment system treats my farm’s entire water supply without the use of any chemicals.
“My 1982 Deere 4240 is a great tractor. It has more than 10,000 hours on it, but the engine has never been touched.
“My 2000 CMC all-air grain bin drying system works great. It’s a simple system with no heat or stirrators to work with.
“My White G100 6-row narrow planter does a perfect job.”
“I bought my 1978 Deere 4240 tractor used when it was seven years old and it’s my best buy. It has more than 9,200 hours on it . The only major repairs have been to the crank bearings and ring pump. This tractor seems to have more power now than when it was new.
“My 1978 Ford F-250 4-WD pickup equipped with a 351 cu. in. engine is a best buy. I bought it used when it was two years old. It has more than 210,000 hard miles on it and the engine has never been overhauled.
“I bought my 1990 Ford F-150 4-WD pickup used when it was six years old and it’s my worst buy. The pickup’s 302 cu. in. engine is underpowered, even though it has electronic fuel injection and this a lighter truck. It used more fuel and had more problems than my 1978 Ford F-250. I finally replaced it with a 1994 Chevrolet equipped with a 350 cu. in. engine. This model has much better performance and economy.”
“My 1972 Massey Ferguson tractor equipped with a diesel engine still runs good and is easy on fuel.
“My 1981 Deere 4240 tractor is trouble-free and is also still going strong.”
“We use it almost every day of the year for chores. It’s very reliable,” says Jim, happy with his 1981 Deere 4240. “The engine had more than 8,000 hours on it before it needed any repairs. We use a Deere 148 front-end loader with it.”
James has had good luck with his 1980 Deere 4240. “It’s pretty dependable and parts are still generally readily available. It performs well and has lasted a long time. In fact, it still has the original starter, which turns it over easily even in cold weather.”
On the other hand, fuel economy leaves something to be desired, he says. Likewise, the manufacturer should have used the same fuel pump it used on the 4440, which he feels is superior to the one used on the 4240.
Jim’s happy with his 1995 Deere 450 grain drill. “I like it because it’s easy to set the seeding rate. Also, I like the double disc openers and the press wheel design. Overall, it’s a good drill. My only complaint is that it’s made from light material.”
He isn’t impressed with his 1995 Deere 7300 planter. “One problem is that it’s built out of light material. Another is that it’s a plateless planter which makes it hard to set the seeding rate, especially for cotton. I traded in my Deere 7100 planter which was 12 years old, and it worked a lot better than this one.
“I’ve owned three Deere 4240 tractors and liked all of them. Hardly any problems at all.”
David Luscomb, Clear Lake, Iowa: “It has great power and fuel economy for a 65 hp tractor,” says David about his 1991 Deere 2555. “Handles my grinder-mixer just as well as my Deere 4240.”
Robert Mueller, Marengo, Ill.: A sctof DT 710 Goodyear radial rear tires is Robert's “best buy”. “Vibration from the bias-ply tires on my Deere 4240 tractor used to vibrate the monitors we use, but these new tires have totally solved the problem. They have a very smooth ride.”
Alvin Warner, New Knoxville, Ohio: “My 1991 Polaris 2 by 4 ATV is a joy to ride and has floor boards to keep my feet dry. It shifts like a car. “My Deere 4240 diesel tractor has 2,100 hours and is a best buy. The only mainte nance has been for oil and filter changes.”
Renie Miya, Clearfield, Utah: Renie says his Deere 4240 and 4455 tractors equipped with Sound-Gard cabs are both “best buys”. “I don’t care what other companies say about how old and out of style Sound-Gard cabs are because I think they're still the best cabs on the market. So are the tractors. All of the controls mount on one side where they're easy to reach. I think the Sound-Gard style fits better today than it did in the 1970's because everything else in the industry is going aerodynamic. Deere can produce the Sound-Gard for another 20 years and it will still be my best buy. In fact I'm now looking for a good used 4230 with a Sound-Gard cab and think it'll bea better buy than a new tractor.”
Wallace Parrott, Lebanon, Ky.: “My 1982 Deere 4240 handles and drives great and is a best buy. The hydraulics are dependable and fast. I’ve spentonly about $50 on repairs.”
Joe Renner, Sidney, Ohio: ‘My 1978 White 508 5-16’s plow does an excellent job of plowing and trails behind the tractor very well. My 1978 John Deere 4240 tractor has plenty of power, has a quiet cab and is one of our best starting tractors,’’ says Joe, who adds this negative note: “Our 1979 Deere 110 disk is one of the worst leveling of any I've ever seen.
John Deere 6 x 4
13 Best Buys2 Worst Buys“My 1996 Deere 6 by 4 Gator utility vehicle equipped with a gas engine has saved me miles of walking. It’s handy for doing everything from feeding cattle to running to the field for repairs, picking rocks and delivering lunch. I’ve spent only about $500 on repairs, not including batteries and tires.”
“The Deere 6 by 4 Gator I bought used is an excellent machine for hauling stuff. It’s easy to start, comfortable to drive and saves us thousands of steps every day. It has good flotation in wet ground, and the dump bed comes in handy when hauling soil or brush. It also has good towing capability.”
Dave’s happy with his 2001 Deere 6 by 4 Trail Gator. “I use it every day. During the winter I use it to plow our roads and driveways. It has required only routine maintenance.”
“We needed a heavier truck to haul trailers on our farm, so last October we bought a new 2008 Dodge 1500 4-WD pickup. It’s a well-built truck. The 4.7-liter engine is economical and has enough power to easily handle trailers on most hills. Shifting into 4-WD is a breeze. I’m not surprised that most FARM SHOW readers who own Dodges are happy with them.”
On the negative side, he lists his 2007 Deere 6 by 4 Gator equipped with a Kawasaki engine. “When we first purchased our Gator we were satisfied with it. However, last year the Kawasaki engine developed the same problem we’ve had with two other Gators in the past – gas leaking into the crankcase. The dealer installed a new carburetor but it didn’t solve the problem. Now we have to change the oil every 25 to 30 hours. And there have been other nuisance issues. I’m not much impressed with the Deere brand. There’ll be no more Deeres on our farm if I have anything to do with it.”
Wayne’s the proud owner of a 2007 Deere 6 by 4 Gator equipped with a gas engine. “Deere finally seems to have the problems resolved with the gas engine they use on their Gators. We had two older Gators that had constant problems with fouled plugs. Our only complaint is the windshield mounting brackets need to be stiffened so the windshield won’t wobble as much.”
On the minus side, he lists his 2007 Sears Craftsman 7-in. professional model angle grinder. “After less than a year of limited use the armature and brushes went bad. Repair parts cost $50. It’s a real disappointment. Craftsman power tools used to be dependable before they started making them in China. This will be my last new Craftsman power tool purchase.”
A 2000 Deere 6 by 4 Gator equipped with a diesel engine rates as their “best buy.” “It’s absolutely the ‘most valuable player’ on our farm,” says Peggy. “We use it for everything from daily cleaning of our commercial boarding stable to maintenance of a 90-home upscale housing development, to taking care of our draft horses and a 17-acre commercial Christmas tree farm. The one constant to our success and sanity is our Gator.
“I’ve been a paraplegic for 21 years. Until we bought the Gator, I mostly did paperwork. Now I can get out to the fields and see all the places where my husband and daughter ride.
“Our 2000 Deere 6 x 4 Gator is our best buy. We love to ride it around our farm and use it to haul feed and salt blocks to our cattle, and to haul firewood and fencing supplies. We wouldn’t farm without it.”
“My 2002 Deere 6 by 4 Gator equipped with a diesel engine is my best buy. It pulls great at the drawbar and can easily handle a 1/2-ton load. The engine has glow plugs and starts great. It’s no effort to get into the two seats. But you have to be strong to lift the box to check the engine.”
“Our 1998 Deere 6 by 4 Gator is our best buy. We’ve spent only about $300 on repairs.
“The Sears 300-amp electric welder we bought in 1957 still works fine. No problems.
“Our Sears 80-amp battery charger is more than 25 years old, and the only repair it ever needed was to a fan motor. This battery charger still works great.”
On the minus side, “Everything that could go wrong, did go wrong on my Deere 4435 combine. The wheels came off, the elevator housing wore out, and the straw chopper blades came out and cut a hole into the sheet metal on back of the combine. The front wheel housing doesn’t line up with the transmission shaft, and electric switches controlling the hydraulics don’t work. This machine was made in Germany so some of the bolts are metric and some aren’t. As a result you need two sets of wrenches to work on this machine.”
“My 2000 Deere 6 by 4 Gator is my best buy. It’s big enough to seat two large men, yet small enough to maneuver through the woods. It has a large cargo box and enough power to pull just about anything. It’s equipped with a V-twin 614cc gas engine and has high flotation tires, so it has enough power and traction to go anywhere. It works much like a small truck. I’m well pleased with it.
“My 1997 Chevrolet 1/2-ton Z71 pickup equipped with a Vortec 350 engine and an off-road package is a best buy. It has a lot of power and the cab has a lot of room. I love it and will probably never get rid of it. It’s a great work truck and can pull and haul a lot. It’s equipped with a third door which I really like.”
“It lets me haul heavy loads with ease,” says Daniel, pleased with his 2001 Deere 6 by 4 Gator. “It tows loads well and is almost unstoppable in all weather conditions. This vehicle is almost maintenance-free.”
On the negative side, he lists his Sears Craftsman 18-volt cordless drill. “After about six months the chuckless mechanism locked up so I couldn’t even change bits. The dealer broke a screwdriver trying to replace the chuck.”
Thomas likes his 1999 Deere 925 discbine. “When we switched from a sicklebar mower to this discbine we couldn’t believe how much time it saved and how easily it handles.
“Our 1999 Deere 6 by 4 Gator is a worst buy. The machine ran good but gas kept getting into the engine crankcase. We took it back to the dealer four times, but he couldn’t solve the problem. We finally traded it in at a loss.”
“My 1997 Deere 6 by 4 Gator has been absolutely trouble-free and is my best buy. It starts the first time, every time, no matter how cold the weather is. It’s the perfect machine for getting in and out of a woodlot to cut firewood, especially in wet conditions. It’ll haul a half face cord of wood at a time.
“My 1999 New Holland 1920 4-WD tractor equipped with a Great Bend front-end loader is a best buy. It’s a real workhorse for its size. The 12 by 12 transmission was well worth the extra cost.
“My 1995 Ford F-150 4-WD pickup equipped with a 300 cu. in. 6-cyl. engine and a 5-speed transmission is a best buy. It’s a very reliable truck. The only problem I’ve had is with the cheaply-built oil pan. At 57,000 miles, the threads are bad so it will have to be replaced.
“My three Husqvarna chainsaws - models 51, 254, and 268 - are also best buys. They’ve never let me down.”
Jim likes his 2000 Toyota Tundra pickup equipped with a V-8 engine. “This is the third Toyota pickup I’ve owned. This one rides as well as my Cadillac Deville car and has a lot of power. I couldn’t be happier.
“I use my Deere 6 by 4 Gator every day on our farm and hunting preserve. It’s the most used piece of machinery on our place. We just love it.”
Roy’s pleased with his 1993 Deere 6 by 4 Gator. “It has excellent flotation and is easy to get on and off, and the bed works great for hauling feed. We also use it to take soil samples and to spot spray weeds.”
John Deere 6400 tractor
15 Best Buys0 Worst BuysVic’s best buy is a Deere 6400 with a 640 loader. “I bought this tractor with 3,200 hrs., now it has 12,465 hrs. Both the tractor and loader are great. I’ve used it for everything. The repairs aren’t cheap, but it has earned each one. If there’s a better tractor, I haven’t driven it.
“I’ve been reading FARM SHOW for over 40 years. It’s a best buy, too.
“The DeWalt cordless chainsaw I bought in 2023 is my worst buy ever. The bar oil cap leaked oil everywhere on each of the three saws my dealer got as replacements when they quit. They should stick to drills and other tools they know how to make.”
“My 1962 Farmall 544 tractor still works as good as new. My 2009 Deere 6400 tractor is also a best buy.”
John nominates his 1995 Deere 6400 tractor as his “best buy.” “Visibility is good all the way around, controls are conveniently located, and the swivel seat is comfortable. They should make the hood easier to open and also make it easier to access the batteries and air filter. I also wish there were more outlets available for accessories.”
“I sold my dairy farm five years ago and am retired now. The last thing I bought, though, was a Deere 6400 tractor. It runs good and is still used to work the land. The fuel pump was replaced last summer.”
“I haven’t had any problems with my Vermeer 504 round baler or my Krone disc mower.
“My Deere 6400 tractor is powered by a 4-cyl. engine that’s very powerful. This tractor has 1,500 hours on it with no problems.
“The engine on my Deere 4020 tractor has about 9,000 hours on it but has never been overhauled. It’s a great loader tractor.
“My Isuzu Lil Pup pickup is tough as nails. It has 150,000 miles on it but has required no major repairs.”
“My 1996 Deere 6400 is a good tractor. It has a surprising amount of power and is easy on fuel. The only drawback is that the air conditioning doesn’t work as well as on other tractors I’ve had.”
“My 1996 Deere 6400 is a good tractor with a surprising amount of power yet is easy on fuel. It easily pulls our 18-ft. tillage rig and packers. The only problem is that the air conditioning isn’t as good as on other tractors I’ve had.”
“My Deere 345 garden tractor equipped with a trailer/bagger is my best buy. I love the handling ease, quiet running water-cooled engine, and reduced mowing time.
“My 1998 Deere 6400 tractor equipped with a cab has a very low noise level in the cab and is equipped with handy, easy-to-use controls. I like some of the little features it has such as step placement, grab bars, etc. My wife says a woman must have had a hand in its design.”
A 1995 Deere 6400 tractor with front-wheel-assist and equipped with a 640 mechanical self-leveling bucket is George’s “best buy”.
“It’s a pleasure to do chores with,” George says. “The loader’s controlled with a joystick, has a quick-tach bucket and bale spear for big round bales, and a forklift attachment for handling pallets. My wife also runs this tractor since it’s easy to operate with the quad transmission. I’ve put 1,600 hours on it with only minimal maintenance.”
“I like my 1996 Deere 6400 tractor and 620 front-end loader. I’m impressed with its power - it’s rated at 85 hp but actually has 95 hp. We use it all the time for grinding feed, baling hay, and a lot of other jobs. The loader is operated by a joystick control which really works slick.”
A 1994 Deere 6400 “mudder” tractor rates as Gary’s “best buy”. “It’s an amazing tractor. Everything on it is easy to service. A lot of common sense went into its design. The hydraulics work well for ditching and working in rice fields.”
William Callihan, Humphreys, Mo.: “My Honda 300 4-WD ATV is the most dependable piece of equipment I’ ve owned in 40 years of farming. I've used it to feed sows and pigs, check cows, spot spray brush and weeds, and to do a lot of other chores over the past six years with no problems. “I'm well satisfied with my 1993 Deere 6400 MFWD tractor equipped with a Westendorf loader.”
Wayne Olson, Cambridge, Ill.: Wayne's best buy is a 1994 Deere 6400 equipped with MFWD and loader. “Handling of the tractor and loader is exceptional. The cab provides excellent visibility. And the transmission is perfect for loading manure.”
Leo Mugan, Mitchell, Wis.: “My Deere 6400 tractor equipped with a cab and power quad transmission is my best buy. It’s the neatest, handiest, most comfortable tractor I've ever owned with some real improvements over older models, including the ability to be refueled from the ground, an improved transmission, and a smokeless, gutsy engine.” Floyd Hartke, Dieterich, HL; “I bought my best buy 1987 Case-IH 4694 tractor used with 800 hours on it. After 1 put on about 200 hours, a tooth chipped off the timing gear. Even though I bought it used, the company still paid for most of the repair.”
Florian Steinlage, West Union, Iowa: David likes his four Sukup fans. "We air dry about 25,000 bu. of com each year at a costof less than 10 cents per bu. for electricity. Our Sukup fans work great and are really working well now that we've replaced the General Electric drip-proof 10 hp motors with totally enclosed motors. The company still won't admit that it needs enclosed motors on outdoor applications. The costto us was about $2,000. Youcouldn't give me a General Electric drip-proof motor,” Florian Steinlage, West Union, Iowa: "Our best buy lately has been our Deere 6400 tractor. We have over 500 hours on it and use it for everything. We thought we had the world by the tail with our "55" series and were worried that we wouldn't like these new tractors as well , but we really like them." Hubert Ragsdale, Wheatly, Ark., also thinks Coffey’s problem may have been caused by friction. “I’ve been a volunteer firefighter for 28 years and a fire chief for 19 years and it doesn’t seem likely to me that the cause was electrical. Look for bad bearings on drive shafts that might have heated up and ignited crop residue. Only a close and painstaking investigation will ever disclose the cause.” Jeff Greenburg, Stratford, Wis., experienced a fire in his 1990 Ford New Holland 276 that totalled the tractor, “It had 2,000 hours on it. Our hired man was driving it but, fortunately, he wasn't hurt. The fire appeared to start down in under the hood and may have been fueled by hydraulic fluid. Before the fire we had experienced problems with hydraulic hose breakage in the articulation area, where hoses, cables, wires, and driveshafts are all jammed lightly together. We were fortunate that our insurance policy provided full coverage for the loss, They never did tell us what caused the fire. I think the 276 is a tremendous tractor despite the problems we had." Emily Coffey says she still hasn’t reached a final insurance settlement with Farm Bureau Insurance, which initially offered $35,000 for the destroyed tractor and swather, which were purchased new in 1990 for $77,000. Specially trained fire investigators have inspected the tractor but had not yet come back with a final report at the time this issue went to press. She hasn’theard from anyone at Ford New Holland as to the probable cause of the fire. “One of their representatives came out after the fire and said he’d send a report, but we never heard back,” she says. Contact: FARM SHOW Followup, Emily Coffey, 6187 Independence St., Arvada, Colo. 80004 (ph 303 422-2865).
John Deere 430 yard tractor equipped
12 Best Buys2 Worst BuysA 1988 Deere 430 yard tractor equipped with a diesel engine and 72-in. mower deck rates as John’s “best buy”. “This tractor has about 1,800 hours but still runs like new. The deck is perfectly designed. I also use a 54-in. angled scraper blade and a 3-pt. mounted sprayer with it. It’s an awesome setup.”
George is impressed with his 1990 Deere 430 garden tractor equipped with a 3-cyl. Yanmar diesel engine. “I’ve owned several Deere garden tractors over the years, but this one is the best ever. I use it with a 4-ft. blade, 4-ft. snowblower, 5-ft. mower, a material collection system, and a hydraulic post hole digger so it stays busy all year long. It has had only a couple of small problems which were easily fixed. The hydrostatic transmission works great. Even in subzero weather this tractor never fails to start, although most of the time I would plug the engine heater in for a half hour or more.”
Stanley likes his 1988 Deere 430 diesel garden tractor. “We use it as a bulldozer, lawn mower, and garden tiller.”
Mike nominates replacement V-belts sold by Jay Dee Enterprises, Inc. as his “best buy” (3465 Lost Nation Road, Unit 15, Willoughby, Ohio 44094 ph 800 989-0162 or 440 946-9367; website: www.jdv-belts.com). The company bills itself as a farm market supplier of “quality V-belts at economical prices.” If they don’t have a scarce replacement belt in stock, they can have one custom made.
“They sell an endless belt which can be cut to any length. It was a life saver for us,” says Mike. “We used one on a 1960 Deere 430 crawler equipped with a Deere 90 loader. The hydraulic pump on this crawler is mounted up front, so to replace the fan belt and also the generator belt you have to just about totally disassemble the entire front end of the crawler. We broke the generator belt on a Sunday, and I ordered a replacement belt off the company’s website that night. Monday morning I got an email from them stating that the order had been received. The package was delivered on Tuesday via Fed Ex, and ten minutes later we were rolling. The smallest order they take is 10 ft. so we have plenty left for future use.
“Our Deere 430 crawler is also a best buy. It has a factory 3-pt. and pto and is a handy little workhorse. Not everyone needs a big D8 Cat sitting in their shed. We totally rebuilt it from the radiator cap all the way back to the drawbar. We use it with a rotary mower in our pastures, and we also use it with a 3-pt. rear blade to move dirt. I would think there would be a market for this size crawler, except that today it would probably be made overseas and would be overpriced. If it were made again today it would have to be built with 1960’s made-in-America quality.”
“I like the Pengo auger teeth we mounted on our Deere 31 3-pt. posthole digger. The abuse this digger has been through in rocks is unbelievable but the teeth still look like new. I bought the auger teeth years ago while they were still being made by an independent company located in California. The company has since been bought out and is now headquartered in Laurens, Iowa (ph 800 599-2011; website: www.pengocorp.com).
Robert’s much happier with his 1998 New Idea 4844 round baler than he was with the Deere 430 baler he had before.
“The hydraulic pump on the Deere wouldn’t operate at anything less than maximum rpm’s. It was such a heavy machine it required a 70 hp tractor to pull it to make a 4 by 4-ft. bale. It wouldn’t work properly in dry or damp conditions. The ‘Bale Command’ electronics also didn’t work well.
“On the other hand, the New Idea requires little horsepower. The bales it produces are consistently the same size and weight. It’s a lightweight, compact machine and the electronic bale wrap feature works well.”
Bill Marquardt, Petoskey, Mich.: “I like my 1990 Deere 430 round baler, I’ve never had a problem with it and I really like the bale monitor. It's a necessity for any operator, “I've had trouble with my 1990 Ford F-250 Club Cab pickup. The engine had to be replaced at 70,000 miles because of crank backlash, and the transmission had to be replaced twice because it didn't have ( ( enough cooling capacity. I didn’t get any help from the dealer at all. “T've also had problems with my Gehl 6620 skid steer loader, The servo motors are junk, and the factory cylinder leaks at the welds. This machine just isn’t built well.”
Jason Boyer, East Berlin, Penn.: “It makes nice tight bales at a rate of up to 25 bales per hour,” says Jason, owner of a“best buy” 1988 Deere 430 round baler. “My 1991 Deere 1360 disc mower-conditioner works great and will mow as fast as 1 want to drive.”
Pt » = aceeane ahaaesaess . OA Oe Best & Wo ( “Hydro-Tech silage preservative ismy worst buy. It’s designed to be sprayed onto silage and eliminate the need to cover bun- ker silos with plastic. It’s supposed to swell up and shed water, but with all the rain and snow we had, the top 12 to 1Sin.ofsilagein our bunker silo and 12 to 15 in, along the walls was ruined, It was nice not having to bother with tires and plastic, but it wasted too much silage.”
Howard H. Mann, Rutland, Mass.: Howard's impressed with his 1993 Welger round baler equipped with a net wrap attachment. “It’sa pleasure to entera field and not have to worry about belt splices breaking or net wrapping around the rolls. We owned Deere 430 and Deere 435 balers before we bought this model.”
Guy McDiffett, Alma, Kan.: Guy’s pleased with his 1991 Case-IH 7110, 1992 Ford 1220, and 1992 Case-IH 5140 tractors. All have front wheel assist. “I’m satisfied with all of them. They have handy controls and perform well. I haven’thad any problems with any of them. “My Better Bilt liquid manure tankismy worst buy. Basically, the machine works fine but when a valve broke on the back, the company didn’t have the part. After two months I still don’t have the part. They say it’s on a ship from Italy. They wouldn't consider taking a valve off their assembly line. “I’ve also had problems with my 1992 Westendorf TA 45 front-end loader. My main complaint is with the quick tach mounting system. It has handles that you pull up to unhook the bucket. However, dirt and gravel can getin where the rods work up and down. I have to use a bar to pry the rods up sol can get the bucketoff. Also, the main frame broke during the first year.” Clark E. Zipse, Freeport, Ill; Clark's had good luck with his 1984 Deere 430 diesel tractor. He uses it with a 60-in, wide mower and a 48-in. wide blade. “It has plenty of power for mowing and pushing snow on our hills. No problems.”
Harold Weppler, Morse, Sask.: “It makes the best round bales on the market,” says Harold, owner of a 1988 Deere 430 round baler. “It’s simple to operate and requires little maintenance. “My 1984 Deere 7721 pull-type combine is also a best buy. It does a good job, is easy to adjust, has lots of capacity, and holds its value.” On the negative side, “The feeder chains on my 1989 New Holland 358 mix mill were installed backward. The mill's engage pin sometimes flies out under a load. The dealer couldn't fix it. Ever since Ford took over New Holland the quality has been poor. “My 1986 Case-IH 5600 cultivator is also a worst buy. Two sets of shanks had to be replaced and the wing lift binded and fell down, bending the axle. The wing lift holdup tower tore out of the frame and left hoses dragging. The walking beam axles had to be rebuilt twice.”
Randy Ratliff, Live Oak, Fla.: “My 1989 Deere 430 round baler is a best buy. It makes good uniform bales that stand up well. Converging wheels are worth the extra cost. The only thing I don’t like is that it takes a long time to tic the bale.”
Paul Wallis, Granton, Ontario: Paul says his 1988 Deere 430 and 1989 Deere 435 round balers “have been very reliable. However, sometimes the stems get under the twine knife and prevent twine cutting. Wind can also interfere with twine tying. “My 1987 Gehl 1460 round baler is a worst buy. The belts constantly break and wrap around the top pulley. It cost $400 to fix.”
Larry Shepler, Reynoldsville, Penn.: “It operates smoothly and runs good, but is very clumsily built compared to the 1816 model it replaced,” says Larry about his 1988 Case 1818 skid steer loader. “There's too much overhang on the back so I can’t maneuver it in small places. It also needs a fuel gauge.” Larry’s Hesston 1010 Hydra Swing mower-conditioner is another “worst buy”. “The pivot tongue is the only good feature as it makes it easy to move the rig back and forth from field to repair shop. In one 1 3/4acre field I once broke 11 knives and three guards. It knocked out the cutterbar heads on a regular basis and they cost $70 each to replace. The conditioning rolls were there only to move hay off the cutterbar - they “The pivot tongue is the only good feature. Makes it easy to move the rig back and forth from field to repair shop.” couldn’ tcrimp arotten potato, Finally, stress cracks and bad bearings made us trade it for a New Holland 489 haybine which has caused very little trouble.” On the positive side, “My 1986 White 2 110 tractor runs smooth and is easy on fuel. Gear shifting isa little on the sticky side, but the powershift is smooth and easy to operate. The cab is very quiet and has better visibility than any other tractor I've ever driven. We like the cab so much that we’re looking for one for our White 2-85 tractor.” Larry’s 1989 Deere 430 round baler is another “best buy.” “It’s so easy to operate that the first bale I made with it looked as good as the last of the season, The monitor works great, but it’s difficult to set bale size because there’s no bale size indicator.”
Earl Ehlers, Lahoma, Okla.: A 1984 Deere 430 hydrostatic drive lawn and garden tractor equipped with a 60-in. deck heads Earl’s “worst buy” list. “The 3-cylinder diesel sometimes ran on only one cylinder. The steering would quit when the tractor was working hard on a hot day, and the mower blades wore out in less than 100 hours.”
John Deere 4450 tractor equipped
14 Best Buys0 Worst BuysSteve’s happy with his 1983 Deere 4450 tractor equipped with a Quad Range transmission. He bought it used in 1986 with about 1,250 hrs. “This was my bread and butter tractor for more than 15 years, and it still doesn’t use any oil. I used it with an 8-row planter, a 10-row planter, a Buffalo cultivator, a Case IH 496 disk, a grain cart, and a 3-pt. mounted 60-ft. sprayer. I always changed the oil and filter every 125 hrs. The fuel pump was turned up, and I updated the air conditioning and turbocharger.”
“I recently bought a used 1985 Deere 4450 tractor with about 2,200 hrs. on it. The powershift transmission works great for swathing and baling, planting, and light field work. Best of all, this tractor has no complicated electronics or computers, which makes it simple to maintain and repair. I wouldn’t trade this old tractor for a new one.”
Robert’s impressed with his 1989 Deere 4450 tractor. “It has more than 11,000 hours on it but only the alternator and air compressor have been replaced.”
“I love my Deere 4450 tractor because it has run so reliably for so long. It had 4,400 hours on it when I bought it used in 1999, and now it has 12,040 hours on it. The engine has never been touched and besides general upkeep, the only replacement parts needed have been a new hydraulic pump and a rebuilt quad range transmission. All other parts are original. I use synthetic motor oil at a 350-hour change interval, and I never have to add oil between changes. The 4450 is my main farm tractor, so it has a loader on it. I use it for cultivation, seeding, haying, loader work, etc. What with all the trading that goes on, I don’t think a lot of people keep their tractors long enough to really know if they’re any good. I sure like mine - it hasn’t let me down yet.”
“I’m well satisfied with my 1983 Deere 4450 tractor. It has more than 15,000 hours on it, but neither the valve cover nor the oil pan have ever been removed. However, it could have used a better job paint job. Here in south Texas we farm all year long so the sun and weather conditions are hard on a tractor’s paint.”
Bert nominates his 1987 Deere 4450 tractor as his “best buy”. “We use it for everything from feeding our cattle to planting. We had to replace a water pump on it. Otherwise, it has needed only regular maintenance.”
Jim Engel, Beatrice, Neb.: Jim describes his 1985 Deere 4450 tractor as “a lemon that’s painted green”. “It’s the most undependable tractor we have on our farm. The first year we had it one of the rear wheel rims cracked at the bead form line. It doesn't come close in quality to the 4010, 4020, 4430, or 4440 models that we've used in the past. Our 4020 equipped with a front-end loader has 8,900 hours on it with only normal maintenance, and our 4440 has 5,400 hours on it and is a real gem. The list of other repairs is endless.”
John P. Voigt, South Haven, Kan.: John's the satisfied owner of a 1987 Ford F-250 diesel pickup. “When I bought it Ford used the same exhaust system on both its gas and diesel models. However, the exhaust system had too much back pressure for the diesel engine so I had a new stainless steel exhaust system and a new air cleaner installed. Now the 6.9-liter engine has about the same horsepower as a 7.3-liter engine. The pickup is built heavy and I likeit. “In August 1991 I purchased a new Deere 2355 MFWD tractor equipped with a Deere 245 loader and no cab, It’s the biggest small tractor I've ever owned, I really like how it shifts. I traded a Ford in on it and am glad that I didn’t buy another Ford. One problem is that most Deere dealers order this tractor with economy hydraulic outlets which I had trouble using. I waited until Deere had one of its half price sales, then bought a set of standard plug-ins. “I recently purchased a Deere 7800 MEFWD tractor equipped with a power quad transmission. like the transmission as well as the tractor’s large cab, comfortable seat, and easy-to-fill fuel tank. I traded in a 1988 Deere 4450 MFWD tractor that had 1,100 hours on it. It rode so hard it hurt my back, and it seemed like it was always in the shop for minor repairs.”
Charles W. Harless, Waco, Texas: “I'm well pleased with my 1990 Deere 4450 tractor. No problems.”
Jim Hermanski, Enid, Okla.: A Same tractor and mower heads Jim’s “worst buy” list. “It's hard to change oil on the tractor without getting oil all over the side of the engine. The pto brake is a real hassle to operate and it’s hard to hook up equipment, “The mower’s automatic wing locks are a pain, and there should be a way to get hold of the speed joint and unhook it without smashing your fingers, The hydraulic cylinders on the wings leak down.” Jim's happy with his 1985 Deere 4450 mfwd tractor. “It’s dependable and has good visibility and case of operation. Because of the mechanical front wheel drive I don’t need to use wheel brakes in the field. The power shift works great for operating a baler. “My Deere 1508 mower also is a best buy. The blades are easy to change and are tough.”
Brent Maust, Bay Port, Mich.: A 1984 Deere 4450 tractor rates as Brent's “best buy”. “The 15-speed transmission is convenient and trouble-free. It has good fuel economy and can do everything from cultivating to hard work such as plowing.”
Fred Nelson, Audubon, Iowa: “It produced the best stand of soybeans I’ve ever had,” says Fred, owner of a 1990 Great Plains 24-ft. folding drill equipped with seed firming wheel and 1 by 12-in, double “V" press wheels. “My 1983 Deere 4450 tractor is also a best buy. I like the 15-speed powershift transmission, and the mechanical frontwheel “It produced the best stand of soybeans I've ever had.” drive was well worth the extra cost. The only thing it’s been to the shop for is updated front axle seals.”
Albert Prich, Owendale, Mich.:“My 1988 Chevrolet 1500 4-WD pickup has been nothing but trouble. I had to replace the front shocks, starter, intake manifold, valve guides, valve seals, and 4-WD switch, The cab rattles badly and it takes at Icast a minute to engage or disengage the 4-WD. The brakes are bad and remind me of the mechanical brakes on my father’s 1938 Ford car. When I use it to pull my travel trailer in hot weather, as soon as the temperature gauge reaches 225° the fan suddenly starts up. Within 15 seconds it drives the temperature down to 210°, then shuts off. Two or three miles down the road it starts up again. This cycle is repeated over and over. The defrosters fail to keep ice off the windshield and the heater controls are very poor. I have to take my eyes off the road to use them. Needless to say I'll buy a different brand next time.” Albert’s “best buy” is his Deere 4450 tractor equipped with radial tires. “It handles nice and has lots of power. “My Deere 2510 tractor is another best buy. It just goes and goes with very litle upkeep.”
Mike Krajacic, Avella, Penn.: “It always starts and gets fairly good mileage, but it could use a litte more power,” reports Mike, owner of a 1986 Ford F-250 diesel pickup. Mike’s “best buy” is his 1986 Deere 4450 tractor equipped with mechanical front wheel drive. “It has good power and the 15speed transmission is great. The front wheel drive provides a lot more traction when we plow down liquid manure.” His “worst buy” is his 1985 International 5100 grain drill. “The hay seed settings are very inaccurate, and the seed tubes kept plugging up so I had to install larger ones. If I leave fertilizer in it for more than 48 hours it'll freeze up.”
John Deere 535 baler
14 Best Buys0 Worst Buys“My used Deere 535 baler is still in good shape. It has an automatic tie system and bale kicker, so each bale requires two motions - depressing the clutch to stop and opening the gate hydraulically, which saves wear and tear on artificial knees and arthritic hands.
“My Ritchie 300 fiberglass drinker is my worst buy. It’s rated to handle 125 beef cows. However, the drinking reservoir is so narrow that livestock have to turn their heads 90 degrees just to get at the water. Even then, their mouth doesn’t fit and they dribble and slurp so much water that during the winter an ice cone develops around the drinker. To prevent dangerous slips, I have to chip the ice away twice a week.”
“It gets a lot of hard use, but we’ve had very little trouble with it,” says David about his 1998 Kawasaki Prairie 400 4-WD ATV. “The company took care of a few minor problems. I have an artificial leg so I appreciate the automatic transmission. The floor board design is also helpful. There are more powerful ATV’s on the market, but after riding them for a while I really came to appreciate this machine.”
“My 1979 Ford F-250 4-WD pickup is a best buy. It has been all over the country and has been in a few tangles that required some hospitalization, but it came away better for it all.
“My 1972 Deere 4620 and 3020 tractors are dependable and are best buys.
“I’m well pleased with my Deere 535 round baler. I’ve owned Hesston and Gehl models before but this is the best.
“My biggest disappointments have been with my Case-IH 470 and 480 21-ft. disks. In my opinion, these discs were nothing but glorified sheet metal. I sold both of them and bought a Deere 14-ft. model. I can cover the same amount of ground as I had been covering with the two Case-IH models, and do a better job. No problems.
“My Hesston 6650 swather is a disaster. I don’t understand how a company can even put its name on a machine like this. I wish I still owned my Deere 1600 14-ft. hydraswing swather.
“I was given a kit to raise the rear bench seat in my 1985 Ford Supercab pickup. It was purchased through J.C. Whitney and was something that I had asked for. However, it’s a worst buy. The bolt holes in the brackets were about three sizes too big, the washers were too small, and I had to reshape some of them to fit. I was really disappointed with it.”
“It’s always ready to bale hay when I am,” says Richard, well pleased with his Deere 535 round baler.
“Our best buy is our 1993 Deere 535 round baler. We’ve used it to make more than 10,000 bales and it still works great. It makes nice, tight, uniform bales. The bale size and amount of twine used can be adjusted easily. Also, the bale monitor lets the operator know which side of the baler needs hay and when the tying has started. We’ve had to replace only two bearings. My only suggestion is that they make the pickup teeth easier to change. Also, the hitch could be built stronger.”
Robert likes his 1993 Deere 535 big round baler equipped with surface wrap, converging wheels, and hydraulic pickup lift. “It’s a simple and clean machine that has been trouble-free since day one. The ‘bale track’ monitor is the best on the market for making perfect bales. The only modification I made was to install an electric row shut-off solenoid valve off an old planter, which allows me to control the start of the tieing by simply pushing a button in the cab.”
“My best buy was my Deere 535 round baler. “My worst buy is my Marliss no-till drill. I followed the company’s suggestions on how to get it to plant at the right depth for two years. I wanted wider press wheels but the company would only sell them to me at $61 apiece. I finally bought new wide press wheels from Shoup Mfg. for $26 apiece. Now I have to solve the problem of having to change two sets of sprockets and chains whenever I switch from planting oats to beans. I also had to straighten out the guides on the press wheel springs - the guides were welded together wrong at the factory and are half worn out after planting only 200 acres.”
David nominates his 1994 Deere 535 round baler as his “best buy”. “My brother and I have used it without any problems to bale straw, hay, and corn stalks. It’ll make whatever size bale we want. It doesn’t cost any more than other balers we priced.”
“My 1995 Ford F-150 4-WD pickup is the nicest vehicle I’ve ever owned. It has a quiet, smooth ride and the automatic transmission shifts smooth. The 351 cu. in. engine has a lot of power but could be more fuel efficient. “My 1996 Deere 535 round baler, coupled with my Deere 7800 MFWD tractor equipped with a powershift transmission, is a pleasure to operate. Makes solid bales that weigh twice as much as the ones we made with our old Deere 510. I really like the net wrap. Holds prairie hay together and virtually eliminates spoilage.”
Mike Scanlon, Oskaloosa, Lowa: “I'm impressed with my Posi Lock gear puller. It’s easy to use and doesn’t slip off the pulley or gear. “I’ve also had good luck with my 1993 Deere 535 round baler.”
Alton Lerwick, Lyman, Neb.: “My worst buy is my 1990 Ford F-350 4-WD pickup equipped with a 7.3-liter diesel engine. It has 58,000 miles on it. The trouble began when the clutch went out at about 20,000 miles. The company said that was ‘normal wear and tear’ and wouldn't cover it under their 60,000 mile drivetrain warranty. Since then the clutch has gone out again, the clutch master cylinder has been replaced twice, and the power steering has been repaired three times. It’s gone through three starters, four alternators, and five sets of batteries and the transfer case has been rebuilt three times. The rear seals leaked and ruined the rear brakes, The radiator fins are so close together that nothing can pass through them. As a result, the screen plugs up and has to be removed and cleaned on a regular basis, The pickup frame broke on one side and now paint is peeling off the hood. I’m a real skeptic whenever I see Fords advertised as ‘Ford tough,’ “My Deere 535 round baler is reliable. The bales start easy and are solid.”
Lester Gehman, Manheim, Penn.: “My 1989 Dodge diesel pickup is my best buy. The Cummins diesel engine starts easy, runs like a top, and pulls like an 8-horse team. It gets 20 to 22 mpg. Takes only half as long to fill the fuel tank as the Ford we owned before.” Norman Farrington, Mechanicsville, Iowa: Norman nominates his 1991 New Idea 5209 rotary hay mower as “best buy”. “All I do is get on and go. It does a great job at fast speeds. “My 1988 Case-IH 7120 tractor handles comfortably, has a quiet cab, and is easy to service. The powershift transmission performs well. “My 1992 Deere 535 round baler with net wrap is built strong to withstand damage on rough ground and makes good bales at high speeds. The netting speeds up baling and sheds water. Works great as long as it goes on right. However, I’ve had problems with it catching and tearing.”
Kenneth Dickneite, Iberia, Mo.: Kenneth’s the satisfied owner of a 1992 Deere 535 round baler. “This baler is built simple and is easy to operate and maintain, It consistently makes tight, uniform bales. Even with all the rain we had last year there was little waste on the outsides and bottoms of the bales.”
Laurence Pacey, Miltonvale, Kan.: Laurence nominates his 1991 Deere 535 net wrap baler as his best buy. “We’ ve had good results baling our own hay and also custom baling.”
Albert Chlan, Webster, Minn.: Albert's “best buy” is his Deere 535 round baler equipped with net wrap. “It lets me switch from net wrap to twine in no time and eject the bale without having to back up.
John Deere 7200 tractor
12 Best Buys2 Worst BuysA Deere 6210 MFWD tractor equipped with a cab and front-end loader rates as Zane’s “best buy”. “It has a comfortable cab and convenient and responsive hydraulics.
“Our Deere 7200 tractor also has a comfortable cab. It’s equipped with a Power Quad transmission which works especially well with our big round baler.”
“I bought my 1994 Deere 7200 tractor used two years ago with 2,000 hours on it and have since put 800 trouble-free hours on it. The cab offers a great view and is roomy and soundproof. The tractor has great hydraulics and the Power Quad transmission is a pleasure to use. Also, the air seat is really comfortable.”
Jason’s pleased with his 1996 Deere 7200 conservation planter and 1997 Deere 750 15-ft. grain drill. “Both of them will plant in all the soil conditions we have on our farm and produce great stands with little time spent on maintenance. We added Keeton Seed Firmers to the planter which resulted in near perfect emergence (1238 Tress Shop Rd., Trenton, Ky. 42286 ph 502 265-5158). We added a Landmark foam marker to the drill. Both are excllent products.”
Robert likes his Deere 7200 tractor equipped with a cab, air conditioning, and power shift quad transmission. “It’s rated at 92 hp but out-performs other 100 plus hp tractors I’ve used in the past. It has 1,000 hours on it with no problems. The cab is very comfortable.”
Lloyd Jark, Stratford, S. Dak.: A 1995 Deere 7200 tractor rates as Lloyd's “best buy”. “It handles easy and drives comfort“I couldn't keep it operating for more than a half hour without having to replace the battery.” ably, and the cab has excellent visibility. really like the 16-speed Power-Quad trans mission. It has clutch-free shifting from forward to reverse and offers the right speeds for my farming operation. It’s a real comfort to drive this tractor.”
Tim Broer, Iowa Falls, Iowa: Two Mirafount energy-free hog waterers rank as Tim’s best buys. “You can put hot water in them before dark if it’s going to get really cold at night and they stay thawed all night. They work like a big thermos jug. The electrical savings is nice, “The heavy duty planter markers on my Deere 7200 Max Emerge were not engineered too well. The frame to support them “] put five new clutches in it. Turns out the pressure plate was warped.” is inadequate, as are the bolts that hold the telescoping portion of the marker. In addition, shear bolts work loose all the time.”
Don McAllister, Chesley, Ontario: “The Comfort Gard cab makes it a pleasure to drive,” says Don, happy with his 1993 ““Anyone who buys these products should have a good welder handy.” Deere 7200 MFWD tractor. “The Power Quad transmission makes it easy to select speeds and to shift gears. The engine has a lot of torque reserve and is easy to service. The few problems we’ ve had were promptly taken care of by our dealer. “We're pleased with our, 1992 AgroTrend 500-gal, tandem axle sprayer equipped with a 45-ft. boom (Agro-Trend Mfg., Clifford, Ontario), It’s a well-built sprayer that’s easy to fill. The tank has a large opening on top and a wide platform that makes it safe to dump in chemicals. The clean water attachment lets us rinse chemical jugs with less mess than using a hose. The foam marker makes it easy to avoid overlaps and misses in the field. “Our worst buy is our 1993 MTD TurfPower 22-in. push-type lawn mower. It’s hard to push, especially with the safety stop bar on the handle. It’s also hard on gas, vibrates terribly, and doesn’t have enough power. A piece broke out of the deck at the motor mount and the rear wheel handle bracket doesn’t stay tight.”
C. Tim Bishop, Queenstown, Md.: “My 1993 GM 2500 2-WD Suburban with a454 cu. in. engine is my best buy. I installed a set of Thorley headers equipped with a Walker Super Turbocharger muffler and a reprogrammed Hypertech computer chip. I got 11 to 12 mpg towing a 24-ft. race car trailer and 15 mpg without the trailer while hauling 7 passengers or 30 bags of seed corn. I'll pass up anything on the road and has the style and comfort of a luxury automobile. It also has great resale value. However, I wish ithad remote electric door locks and heated side mirrors. “My 1993 Deere 7200 6-row, 30-in. vacuum planter is equipped with Yetter residue managers. It's easy to adjust and plants accurately. Last year I had my best ae > orst Buys ious page) stand of no-till corn ever. “My Deere 9500 combine is equipped with Pixall snapping rolls that eliminate the need to chop corn stalks (Pixall Mfg., Clear Lake, Wis. 54005). The rolls have 10 sharpened, chrome-plated knife blades that intermesh to grip corn stalks and weeds, pulling them down through the snapper plates and crimping them for faster decomposition, We use a Deere 750 no-till drill to plant notill soybeans in untouched corn stalks the following year. Both the combine and drill do an excellent job and have good resale value.”
Mark Knudsen, Jesup, Iowa: “My 1992 Knight 7716 slinger spreader is my best buy. It handles a wide variety of manure, from slop to pen-packed, with flying colors. However, it does unload slow when spreading pen-packed manure, “We use our 1993 Yamaha 350 4-wheel ATV fora lotof jobs around the farmas well as for fun. It has never been back to the dealer. “My 1986 Case-IH 1660 combine is also a best buy.” On the “worst buy” side, Mark’s disappointed with his 1993 Yetter 2967 row cleaners. “They're supposed to work in conjunction with the no-till coulters on my Deere 7200 12-row planter. They're designed to bolt on top of the casting for the no-till coulter. However, the surface on the casting is tapered and not flat so the row cleaner brackets don’ tsitsquare. Thismakes it almost impossible to get the row cleaner wheels centered with the coulters and puts a bind on the pins used to adjust them. The rowcleaners were in short supply last spring sol bought them sight unseen. I won’tmake that mistake again.”
Larry Enget, Audubon, Minn.: “My 1990 Deere 7200 Max-Emerge II vacuum planter is a worst buy. Vacuum pressure fluctuates up and down, causing population to vary within rows from 9,000 to 25,000. Fortunately it’s a relatively simple planter and the dealer is still willing to work with it even though I’ve used it for two years.”
Leroy Jones, Clarion, Iowa: “My 1991 Deere 7200 Max-Emerge II 8-row vacuum planter is a best buy. I used it last spring under extremely wet planting conditions. It was easy to set and operate and had no skips or plugged runners even when I got stuck or had to plant through standing water. Mud did throw one drive chain off which the monitor noted immediately.”
Tim Flannery, Somerset, Penn.; Tim's “worst buy of all time” is his 1990 Deere 7200 corn planter. “This planter is a real lemon. All the bolted-on parts are falling off including gauge wheels, closing wheels, and other parts that we've left scattered throughout my fields. I've had more trouble with it in one season than I had in nine years with my previous 7000 planter. The dealer and company are working on the problems. I hope they solve them.” Tim’s “best buy” is his 1990 Ford F-350 7.3-liter diesel truck. “I like the performance and economy. It’s equipped with a DMI cushion hitch that absorbs the shock of heavy towed loads.”
Stanley Crone, Danville, Penn.: “Itdoes a good job in both no-till and conventional till and is very easy to adjust,” says Stanley, pleased owner of a 1990 Deere 7200 corm planter. “I don’t have a worst buy, but my negalive gripe are the metric bolts and nuts on my Deere 7200 corm planter, Deere 1460 disc hay cutter,and 1989 Ford F-350 pickup. I need another complete set of tools, bolts, and nuts just to keep this equipment running. I think we should boycott companics that use metric in this country.”
Richard Legeyt, Sheffield, Ma.: Richard's "best buy" ishis Poly Dome calf hutch. "Calves stay clean and dry. They look and act healthy and start eating grain sooner." Ernest Hoover, Manheim, Penn.; "My Deere 7200 corn planter does a good job of no-tilling. The vacuum seed metering units put finger pickups to shame when it comes to spacing corn and bean seed. don't need any wrenches to make adjustments,"
John Deere 9400 combine
14 Best Buys0 Worst Buys“My 1994 Deere 9400 combine is a wonderful machine. It has 4-WD and a 6-row corn head. Big shots laugh at it, but I don’t care. It really performs.
“I’m unhappy with the Gearwrench ratchets I bought at Sears. They lock up so I have to turn them backward to unlock them.”
“My Deere 9400 combine has performed even better than I expected. It does a super job of threshing and is easy to service and maintain. I can run it 10 hours a day without getting tired.”
Wayne likes his 1991 Deere 9400 hoe drills. “They work good and come with a transport hitch that’s well designed and easy to use. The metering is fairly accurate and seed placement is consistent. However, the single front wheel is too small for wet conditions. Also, the shanks around the pivot area should be built heavier. Otherwise, these drills are a pleasure to use.” His 1995 MK hydraulic drill filler heads his “worst buy” list. “It’s the worst piece of farm equipment I’ve ever owned. Installation is time consuming and difficult. The hydraulic foldup doesn’t have enough power to lift the auger and comes down way too fast. The electric solenoid valve that controls the auger doesn’t completely shut off the flow so the auger dribbles seed constantly. Another problem is that the latches on the cleanout doors are built too light. Also, the auger safety chain is too light and doesn’t stay hooked. I wish I had bought a Westfield or Brandt model instead.” “My 1982 New Holland TR 85 combine is also a worst buy. It’s probably the best overall designed and the most poorly engineered machine I’ve ever owned. It has adequate capacity for its size and threshes clean. It works well in nice, uniform, 40 to 50-bu. per acre wheat. However, it doesn’t take in heavy straw fast enough and it absolutely refuses to feed in lighter crops, particularly barley. The unloading system is too slow and is comparable to an old Deere 95. Also, the steering linkage is built too light, the hydraulics are marginal - particularly the reel speed control - and the sickle drive has problems. However, it’s an easy machine to operate and, under good conditions, saves more grain than some other brands. I’d probably buy another TR model hoping that the company engineers had learned a few things after this machine was built.”
“Our 1994 Deere 9400 combine handles well, has good visibility, a quiet cab, and easy-to-use controls. It’s also easy to adjust for different crop conditions. So far it’s been trouble-free. “My Jonsered chainsaw worked well for a few months, but now when it starts up cold it works only for a few minutes. The dealer can’t solve the problem.”
Tim’s impressed with his new DMI Ecolo-Tiger 730 tillage implement. “It’s equipped with a front row of 22-in. dia. discs mounted on an independent frame that’s equipped with a hydraulic cylinder, allowing the discs to be raised or lowered to vary residue management. The discs are followed by seven deep-tillage shanks mounted in a ‘V’ formation on 30-in. centers. The discs can be equipped with 2, 7, or 10-in. wide winged ‘Tiger-Points’ that run about 1 1/2 in. under the hardpan to break up soil compaction. Various covering attachments and levelers are available to create the desired residue cover and field appearance. An optional ‘X’ disc frame assembly has individually mounted discs on 15-in. centers that are offset to provide a 7 1/2-in. cut. “I’ve searched all my life for a tillage implement that I really like and have finally found it. It works good in all field conditions. I really like being able to raise or lower the discs independently on-the-go to control the cutting and mixing action. The discs are independently supported on spindles so there are no arbor bolts to ball up or scrapers to plug. The disc leveler at the rear of the implement prevents ridging so that when I’m done the ground is almost as level as when I started. If I want I can raise the discs up completely off the ground and just use the tool as a ripper and leveler. I plan to buy another one someday. “I like my Deere 9400 combine but I prefer the larger engine used in the 9500. “My worst buy is my Ford-Versatile 850 4-WD tractor. It’s an axle buster. The company should have a program to replace axle housings.”
Jack McGregor, Clinton, Ontario: Jack's impressed with his 1991 Deere 9400 combine, “Adjustments are easy to make and the controls are easy to operate. It threshes clean without needing a lot of fine tuning. “My Amazone 801 pneumatic spreader is a worst buy. The fan drive belts don’t last and adjustments are hard to make.”
Hugh J. Moser, Jefferson City, Tenn.: “Our 1991 Deere 4055 tractor is troublefree and uses less diesel fuel than any other tractor we’ ve ever owned, It started right up all winter without preheat or ether. “My 1993 Deere 9400 combine is a best buy. Last year I used it to harvest over 800 acres of corn and wheat without one minute of down time.”
Gary Biester, Clay Center, Neb.: “My 1992 Deere 9400 combine is the most maintenance-free machine I’ veever owned. Ican'tsay enough good things aboutit. I use it to harvest 860 acres of corn, soybeans, and milo, All I have to do is add fuel. “My 1992 Gleaner R52 combine is my worst buy. You name it, it broke. Things got worse the longer I owned this machine. All the main drive belts broke three times and each time both the dealer and the company “There's nothing good about this combine. It's a lemon.” said the problem was caused by operator error. The hydraulic lever in the cab broke off twice, once resulting in a near disaster. There’s nothing good about this combine. It’s a lemon.”
Edwin Brown, Jeddo, Mich.: “Our 1991 Deere 9400 combine equipped with rear wheel assist is one of our best buys. The cab is as quiet as a pickup cab and it steers as easy as a pickup, too. We had a couple of problems, but the dealer solved them. “Another best buy is our Simpalift hydraulic power unitdesigned to raise or lower grain augers (Blazon Corp., Box 212, Litonka, Iowa 50480). Lets us raise or lower the auger right from the tractor seat. “Our Woods 5210 riding mower, equipped with a 5-ft. deck, is easier to operate than any other mower on the market.”
Carl Setlak, Standish, Mich.: Car! Setlak, Standish, Mich.: “Ithandles well and does excellent work,” says Carl, generally pleased with his 1992 Deere 9400 combine. “The cor head works great. The floating soybean head works well in small grain, but it’s a nightmare to use in soybeans. My dealer can’t seem to solve the problem. I’m very disappointed with it.” Thomas W. Biddle, Geddes, S. Dak.: Thomas owns a “best buy” 1982 New Holland 851 big round baler. “It’s a good baler and has generally been maintenance-free. The only problem it has is with straw that’s short and dry, When the bale gets about 1/3 full itquits turning. Otherwise, Idon’tknow how this baler could be improved.”
Niel Hannah, Port Hope, Ontario: Nicl mounted a 1992 Vittetoe twin rotor chaff spreader on his Deere 9400 combine and says it's his “best buy”. “It works well in all crops and has made a large contribution to the success of our no-till soybeans, wheat, and oats.”
Carl Carlson, Yoder, Wy.: Carl is impressed with his 1989 Deere 9400 grain drill. “It has excellent ground clearance and 1 like the three rows of shovels and split rims, There are very few moving parts so maintenance is minimal. I also like the capacity of the grain box. “My 1986 Steiger Cougar 1000 tractor equipped with a LTA Cummins engine is another best buy. [thas the best view and the most cab room of any 4-WD tractor I’ve ever seen, The 12-speed powershift transmission really works great. The tractor is easy to service and built to last. It doesn't smoke at all under full load. “My Dovetee corn burning stove is a piece of junk. It wouldn't burn, All it did was smoke and gas the house, The dealer replaced it but the new one did the same thing. I returned it and to this day the company refuses to refund my money. It cost $1,629. “My 1989 Pontiae Grand Prix SE is a lemon, The controls for the lumbar seats went out, and the cruise control hasn't worked since I bought the car. I’ve replaced the stereo three times and I can't get the compass to stay set.”
Reuben Swarey, Guthrie, Ky.: Reuben, whocustom combines with his brother, says their Deere 9400 and 8820 combines are “best buys”. “The cabs are roomy and as comfortable as sitting in your living room. We can change heads to switch from wheat to corn or soybeans in 10 minutes. Almost all adjustments can be made from the cab. No trouble after 1,700 acres.” On the negative side, “My White 435 chisel plow works good, but leaves dint piled up in the middle and low on the outside, It leaves the ground so rough that if you work ground in the fall, it washes bad over winter.”
Larry Knickerbocker, Pittsford, N.Y.: Larry’s 1989 Deere 9400 combine is a“best buy”. “It went right through wheat that was loaded with quackgrass and badly lodged due to too much nitrogen. We're glad we didn’t invest in a grain cleaner because it delivers clean grain. The grain loss monitor is excellent.”
John Deere lawn mower
12 Best Buys2 Worst Buys“In 1996, I purchased a Deere 60-in. lawn mower. I finally had to replace the engine in 2024. It runs like a new machine again.
“FARM SHOW is an excellent magazine.
“I’m pleased with my RIDGID drill driver and 1/2-in. impact. The batteries are excellent, plus there’s a lifetime warranty.
“Buy good tools and take good care of them, and they’ll last a lifetime.”
“I’ve had 6 Deere rider mowers and they’ve all been trouble-free. In 2012, I bought a D130 42-in cut. When it had about 30 hrs. on it, it would die. So I loaded it on my trailer and hauled it 12 miles to the repair shop. It was there for 3 days and they said it ran perfect. I took it home and mowed half my lawn before it died again, so I took it back. The dealer had a half acre lawn and I mowed the whole lawn and it ran perfect so I took it home again. I was beginning to think it just liked the ride to the dealer because it died again. Finally figured out it was the fuel filter. Not sure why the dealer didn’t check that.”
“When I bought my new Deere 20-ft. rotary mower I was under the impression that bigger has to be better, but I was wrong. The long driveshafts that lead to the mower’s two outside wings began to vibrate badly, simply because they were too long to operate without support in the middle. After much frustration I traded for a smaller 15-ft. model. The man who delivered the new model said it wasn’t the first time he had seen a trade like this. It was an expensive lesson to learn.”
“On every Deere riding mower I’ve owned the seat cushion fails where it’s glued to the seat frame, or cracks develop in the seat’s plastic vinyl cover. My current mower is now on its second seat. I paid about $180 for it, but already it’s cracking real bad even though I always apply Armorall whenever I wash the mower. My neighbor has a 30-year-old Yardman mower with a black vinyl seat that’s still in perfect shape. Deere needs to do a quality control check on their seat materials. However, I think the mower itself is still the best on the market.”
“I’m the proud owner of a 2012 Deere 72-in. diesel riding mower. It’s fuel efficient and does a great mowing job.”
“My 2010 Deere 42-in. riding mower is reliable and easy to work on, and parts are easy to get.”
“The deck on my 2013 Sears Craftsman 46-in. riding mower should be built stronger.
“My 2012 Deere 46-in. riding mower started hard and needed numerous repairs.”
“I like my Deere disc mower, and also the New Holland disc mower I had before I bought the Deere. Kuhn makes both mowers. As long as these mowers are well serviced, they’re a pleasure to operate. On the minus side, if you break something the repairs are expensive.”
“I’d like to nominate our 266 and 525 Deere mowers as best buys. We do custom work with them and both tractors have only required normal maintenance. I wish the 266 zero turn mower was still on the market.”
Ron’s satisfied with his 2004 Deere push lawn mower and bagger. “No major problems other than a broken throttle spring, which was likely my fault for getting too close to trees.”
Jim nominates his 1992 Snapper self-propelled mower equipped with a 5 hp Wisconsin engine as his “best buy”. “I’ve used it to mow my lawn, as well as hundreds of others lawns as a part-time job. The engine finally began to give out so I replaced it with a new walk-behind Deere JS30 mower equipped with a 6 1/2 hp Briggs & Stratton engine.
“I paid a premium price for the Deere mower of $500, but it’s a worst buy. This machine could just barely pull itself along. The mower is supposed to have a variable speed transmission, but I could go at only two speeds - turtle slow or jackrabbit fast, with nothing in between. I contacted the company and was given instructions on how to regulate the speed, but nothing worked. Finally I removed the engine and mounted it on the old Snapper mower. I’ll never buy a Deere mower again.”
“I’m well satisfied with my 1999 Deere 15-ft. rotary mower. A hydraulic cylinder and a hydraulic line leaked, but the dealer promptly took care of the problem.
“My 1969 International Harvester 8560 is the best tractor I’ve ever had.”
“It’s still going strong after all these years,” says Clayton about his Deere 7-ft. sickle mower with castor wheel on back that he bought new in 1952.
“We’ve mowed everything imaginable with it, including CRP land filled with gopher mounds and hailed-down alfalfa. This mower was built to last.”
Wilbur E. Smith, Erie, Mich.: “We're well-satisfied with Our Case-IH 25-ft. tandem disk. Itreplaced another Case-IH model that was 12 years old. It does an excellent job and disks level. “My son and I bought our first Deere lawn mower about 15 years ago. It was a 12 hp 212 model. We liked ita lot so we bought a second one five years later. Five years after that we wanted another one, but the company no longer made that model so we bought a 260 model. I don’t know if we'll get five years of service out of this one or not. It sure isn’t an improvement over the old models. We’ ve had problems with broken belts and with the transmission, We've never liked how it operates. I hope we can get a decent trade ona different mower next winter,”
John Deere 110 garden tractor
11 Best Buys2 Worst Buys“My best buy is a Deere 110 I received from my father-in-law. He bought it new in 1968. He was going to have me haul it off for scrap metal because he thought the motor was locked up. I asked him if I could tinker with it. He had tightened a bolt on the pulley system too much. It fired right up. I used it to haul the grandkids around, and some of them learned to drive on it. I have a lot of good memories. It’s still going today.”
“My 1973 Deere 110 garden tractor and Hustler TrimStar 48-in. walk-behind mower are best buys. My 13-year old son overhauled the Deere 110 engine. It’s a very tough tractor and we have only done routine maintenance on it. On the Hustler walk-behind we have only changed oil and spark plugs. We have had it for 12 years with no problems. It’s very heavy-duty.
“We purchased our 2001 Bobcat 773 skid steer with 5,100 hrs. on it and we replaced the engine, wheel bearings and seals. Now the seals are leaking again and the skid steer is jerky when turning on asphalt. Overall, though, it has still been a decent machine.”
“My 2004 Deere 110 commercial loader and backhoe is small enough for easy transport, but built heavy enough for tough jobs. I’ve used it with a grapple bucket to move 30-in. dia. logs and also to take down trees that size. It’s powered by a Yanmar 42 hp. engine which always starts right up, has plenty of power, and is fuel efficient. It comes with hydrostatic drive in three gear ranges and has excellent hydraulics.”
“I’ve had problems with my 2017 Deere 110 riding mower equipped with a Briggs & Stratton 19 hp. engine. I bought the mower used and at a discount from Lowes with only 3 hrs. on it. However, when I tried to start the engine it would often backfire, and I had to make 3 trips to the dealer before they discovered the problem. They found the compression release had broken, so they replaced the cam. Fortunately the repair was covered under warranty. The machine works good now.”
“My 2006 Deere 110 backhoe works exceptionally well and does everything I want it to.
“Six months after I bought my Sears Craftsman 2000 LT lawn tractor it started shutting off for no reason. A Sears rep came out to look at it 6 different times, and finally 1 1/2 years later it was repaired.”
“I’ve owned tractors for more than 30 years, but this one is the best yet,” says Bill about his 2006 Deere 110 loader tractor.”
On the “worst buy” side, he lists his 2010 Sears Craftsman LT2000 riding mower. “Sears technicians have made 7 visits trying to understand why the engine shuts off without warning. The company extended the warranty 3 times. Finally, after 1 1/2 years it’s fixed for the time being. I wanted to return the mower for an upgrade, but the company refused.”
“I just finished my 41st season mowing and plowing snow with my Deere 110 lawn tractor. The belts have only been replaced once and this tractor still runs like a deer. I wish I had installed an hour meter on it when it was new.”
“My 1969 Deere 110 garden tractor has worn out two mower decks and two sets of tires. It works better than a Timex watch.”
Greg’s impressed with his 1967 Deere 110 lawn tractor which he bought used. “I use it to mow my church’s yard and haven’t had a single problem with it. It’s powered by a tough 8 hp Kohler engine, which has never been rebuilt.
“My 1997 Chevrolet Z-71 pickup is my worst buy. I had problems with the transmission, water pump, and three fuel pumps - all before the pickup even had 40,000 miles on it. I don’t think Chevy pickups make very good work trucks.”
“My best buy of all time is a 1976 Deere 110 garden tractor. I use it to mow 1 1/4 acres of grass, plow snow, grade the driveway, blow snow, pull a cart, and do work in the garden. I use it so much that I wore out the engine. I won’t do without this tractor.”
Matt’s had problems with his new Deere 110 12-ft. 10-in. disk which is equipped with cone disc blades spaced 9 in. apart. “The disk is built too light all the way around and should have an extra bearing on front and on each side. It’s built with 2 by 3-in. support beams that are built too light and should be stronger. Also, the wheel bearings go out too quick and aren’t easy to adjust. For what this machine costs it should be built with better quality.”
Lyle Hoffman, Waterloo, Hl.: The 47in. Deere mower deck and grass vacuum Lyle bought for his 22-year-old Deere 110 mower gave “it new life. It mows much smoother and leaves a litter-free lawn, It's now up to specs of a modern mower. “With only 44,000 miles on my 1989 K1500 Chevrolet pickup, the bracket that holds the power steering, air conditioner compressor, and alternator cracked and broke off the studs in the engine block. That was last August. In October, we had to replace the transfer case because the old one was bone dry, even though we never noticed any oil leaks on our concrete driveway or garage floor. The used transfer case they put in operates smoothly, unlike the original. Cost on the second big repair job was $1,500 with no help from Chevrolet.”
Billy M. Fricks, Muldrow, Okla.: “My best buy is my 1973 Deere 110 lawn and garden tractor. I've had to tune it up only a couple of times and have otherwise only changed belts and bearings on the deck. It still runs like new and is on only its second battery. “My Deere 2240 50 hp tractor equipped with a front-end loader is a best buy. I bought it used in 1981 and have had few problems with it. I replaced the water pump and rebuilt the starter.”
John Deere 318 lawn
11 Best Buys2 Worst BuysKeith’s impressed with his 1988 Deere 318 lawn and garden tractor. “Over the years I’ve watched some of my neighbors go through 3 to 4 different small tractors, but mine still runs good. I replaced it with a zero-turn mower last fall to cut grass. I’ll still use the 318 to plow snow.”
“I bought my Deere 318 garden tractor used in 1986 and it still runs like new. It has about 1,400 hours on it with no problems. I use it to mow my lawn and to blow snow, and with a blade to push rocks and dirt. I change the oil twice a year.”
“My 1987 Deere 318 riding mower, which I bought used in 1998, is my best buy. It has required only routine maintenance.”
“It was a lemon from the beginning and is my worst buy ever,” says John about his 1990 Deere 318 riding mower. “I use this machine only for garden tilling. It had a lot of transmission problems. The first two transmissions were covered by the warranty, but I had to repair the next two at my own expense. It cost me $1,200 each time. Something is wrong with this machine more often than not. The tiller bearings had to be replaced right after the warranty expired. At one point the pto, clutch, and valve seat on the engine also had to be replaced. I could take out the valve seat with my bare fingers. I had to bring it to a machine shop where they put in a new seat.
“I paid $4,500 for repairs. It now has 538 hours on it so I only put on about 30 hours per year. It turns out I’ve spent almost $9 per hour on repairs for every hour I’ve used the machine, not including routine maintenance costs for tune-ups and oil changes. It was tuned up twice last year. I can’t afford to buy a new machine, or to make any more repairs on this one.”
“Our 1986 Deere 318 garden tractor is our best buy. We’ve used it every summer to mow two acres a week for 17 years and to push snow during the winter. It has also taught five grandsons how to drive. I had to replace a starter at about 2,000 hours. It’s equipped with an Onan engine and hydrostatic transmission. The feature I like best is the individual rear wheel brakes. We also own a Deere 870 4-WD equipped with a front-end loader and backhoe. It has been trouble-free for 1,500 hours.”
“I have a Deere 318 garden tractor. I built a cab for it and a snow plow. I don’t have to take off the mower in winter. I just leave it in place for the extra weight. In the summer, I pull three 20-in. pull-type mowers off to one side of the mower, adding 60 in. to the mower’s 50-in. width. The 318 is a very good lawn tractor.”
“I like my Deere 25EV chain saw which I bought new in the spring of 1984 and am still using. This saw was made in Japan by Kioritz. I’ve lost count of how many bars and chains I’ve worn out over the years, but this little saw just keeps on running. I use wood to heat my shop so it gets a lot of use.”
A Deere 318 garden tractor rates as his “worst buy”. “The rear output shaft kept breaking while the tractor was still under warranty. Neither the dealer nor the company were very helpful. I think if it would’ve been a $90,000 tractor they’d have been glad to assist, but since it’s just a garden tractor they couldn’t care less. I’ll never buy another green machine.”
“One of my best buys is my Deere 318 garden tractor. I love the power steering and hydrostatic transmission on it.”
Josiah nominates his 1986 Deere 318 garden tractor as his “best buy”. “It has more than 8,000 hours on it but still runs great. We use it to mow grass, to till our large garden with a 42-in. hydraulic tiller, and to pull a 6 by 4-ft. trailer. It had some problems at first but our dealer got the kinks worked out.
“Our worst buys are three Sears Crafts-man 2-cycle gas engine-powered line trimmers. The first model developed engine problems after only two months. Fortunately it was still under warranty so we had it repaired. Then the mounting hardware for the plastic string guard came loose and when we tightened it the string guard broke. When we removed the spool to put on more line, the driveshaft, also made of plastic, totally fell out.
“When we took the trimmer back to the company they were out of stock on the model we had previously owned so they gave us a heavier-duty model. It worked better for a while, but then the stop switch broke and we had to choke the engine in order to stop it.”
Charles Lemke, Glencoe, Minn.; “We like the Deere 318 lawn tractor we bought new in 1992. It's an excellent machine that our whole family loves to use, Power steering and power lift are great features.”
George Krout, Arlington, Ohio: George has had problems with his 1992 Deere 318 riding lawn mower equipped with a 50-in. deck. “The tractor has power steering, but the linkage connected to the hydraulic cylinder assist has a lot of end play so I have to constantly correct the steering. The deck cuts well but does a terrible job of distributing clippings. It leaves them in windrows whether I have the deflector up or down.”
Dick Rugh, Coal Valley, Ill: “Dick’s pleased with his 1993 Deere 318 riding mower. “It's an excellent mower without any faults. Does everything well.”
Sam Land, South Hill, Va.; Sam’s the pleased owner of a 1988 Deere 318 lawn tractor and 47-in, mower, “It's touble-free and so easy to handle that all my neighbors want to borrow it.”
John Deere 345 lawn tractor
13 Best Buys0 Worst Buys“We bought a new Deere 345 lawn tractor in the 1990’s, and in no time the hood started cracking. You see hoodless Deere lawn tractors just about anywhere you go and that’s why. Otherwise, this is still a good tractor.”
“I bought my 1999 Deere 345 riding mower used with 204 hrs. on it. It now has 2,233 hrs. and has required only general maintenance of the belts and blades, as well as 2 spindle replacements. It’s equipped with a Kawasaki 12 hp engine.”
Mike’s happy with his Deere 345 riding mower equipped with a liquid-cooled Kawasaki engine. “The only part I’ve replaced is the ignition module.”
On the negative side, he’s disappointed with his Cub Cadet lawn tractor equipped with a Kohler Command 20 engine. “I’ve had to replace the electric clutch, head gasket, front main seal, and ignition coil, and the steering system leaves a lot to be desired. The cowling is cracking everywhere and the tractor wanders around like a drunk.”
“My 1998 Deere 345 riding mower equipped with a 50-in. deck is dependable and trouble-free. It has about 900 hrs. on it.
“My best buy Troy-Bilt garden tiller, equipped with an 8 hp Kohler electric start motor, is on its third set of blades. The tines on this machine are nearly worn out but it still does a good job.”
“In the summer of 2001, my Deere 345 riding mower went up in smoke after the engine caught fire. That fall I took delivery on a new Deere 445 garden tractor equipped with a vacuum blower and rear-mounted bags, which is my best buy. My only complaint is that I spent more time emptying the bags than I did mowing. To solve the problem I replaced the bags with a 2-ft. long by 3-ft. wide by 3 1/2-ft. high wooden box and hooked the blower up to it.
“I used 2-in. sq. tubing and angle iron to make a bracket that mounts on back of the mower. The box mounts on this bracket and is made from 1/2-in. particle board mounted inside a frame made from 1 1/2 and 2-in. angle iron. There’s a small trap door on top of the box so I can check inside from the seat. The back side of the box is hinged, and the bottom side is removable for easy cleaning. I made a 12-in. sq. extension of the blower tube that hooks up to the box and is filled in with 1/2-in. hardware cloth. I had to extend the hardware cloth down lower for better exhaust. I painted the box black and Deere green. A trailer hitch is built into the box’s frame.
“I mounted two rings on top of the box. By attaching a short chain and using an overhead hoist I can raise and lower the box onto the tractor adaptor. I also added 106 lbs. on front of the tractor.”
“My Deere 345 garden tractor and Deere 7800 tractor are both best buys. My 1998 Honda Accord is also a best buy.”
“I like my 2000 Deere 345 riding mower. I like how easy the mower is to operate, especially the way it backs up. It’s a nice mower.
“My Melroe Bobcat 763 skid steer loader has been a great help in our operation.”
On the negative side, he lists his 1993 Dodge Caravan. “We took out an extended warranty on this vehicle, which was a great idea because it has already gone through three different transmissions in just 81,000 miles. Also, the air conditioner has needed frequent repairs.”
Earl’s happy with his 1998 Deere 345 lawn and garden tractor equipped with a 48-in. mower and 42-in. snowblower. “It replaced my 1977 Deere 212, which was an excellent tractor. In fact, at trade-in time, the 212 was still using its original spark plug. But the 345 is a much superior tractor because it has power steering, hydraulic lift, an automatic transmission, and a tighter turning radius. It handles the snowblower particularly well and is a real pleasure to operate.”
“I’ve used my ‘best buy’ Deere 345 mower for two years. I’m well satisfied with it.
“I’ve had my 2000 Chevrolet 1500 pickup only for a couple of months, but so far I like it a lot.”
“My Deere 345 garden tractor equipped with a trailer/bagger is my best buy. I love the handling ease, quiet running water-cooled engine, and reduced mowing time.
“My 1998 Deere 6400 tractor equipped with a cab has a very low noise level in the cab and is equipped with handy, easy-to-use controls. I like some of the little features it has such as step placement, grab bars, etc. My wife says a woman must have had a hand in its design.”
“We like our 1996 Deere 345 hydrostatic drive garden tractor equipped with a mower and power steering. Before we bought it I often had to ask my wife to help me mow the yard. Now she wants to mow it even when it doesn’t need mowing.”
“My 1950 Allis-Chalmers WD and 1960 Allis-Chalmers D-12 tractors are both best buys. I farmed with them until 1975 when our dealer went out of business. I still own both tractors. They’ve both been overhauled once.
“Since 1975 I’ve been using Deere tractors - a 2030, 2240, 1050 MFWD, 350 dozer, 575 skid steer loader, and 212 and 345 garden tractors. I had to replace a cracked fuel injector on the 2030 five years ago and also replaced a fuel pump on the 2240. The Deere tractors are all best buys, too.
“My New Holland haybine and manure spreader and Fox chopper are best buys. So is my Deere 345 round baler.”
“It’s the best mower I ever owned,” says Stuart about his 1998 Deere 345 lawn tractor equipped with 54-in. mower deck. “The 18 hp V twin liquid-cooled engine with overhead valves has plenty of power. Cruise control lever, power steering, hydraulic foot controls, tilt steering wheel and hour meter are standard equipment.”
John Deere 1025R tractor
10 Best Buys2 Worst Buys“My best buy is my 2015 Deere 1025R tractor with a 2023 mower and a 54-in. front-mount snowblower. Everything can be easily taken off or put on, including the loader. It’ll blow snow over 70 ft.”
“My Milwaukee M18 1/2-in. impact is, hands down, just as good as anything air-powered I’ve used, and it’s way more convenient and quieter. Battery power has come a long way.”
On the negative side is Mark’s Deere 1025R. “The machine runs but doesn’t do anything great. It’s louder than it needs to be. At 189 hrs., the implement hydraulic pump failed, and Deere doesn’t consider this part of the powertrain even though you don’t have steering when running. There are multiple hydraulic leaks around the machine. I should’ve bought something different or older.”
Walter is impressed with his 2021 Deere 1025R sub-compact tractor with a drive-over mower and loader. “Changing from the loader to the mower takes less than 10 min. and it’s the same going back to the loader. It has plenty of power and is easy on fuel.
“The engine on my 2017 Chevy Trax had to be rebuilt at 35,000 miles and again at 70,000. The warranty took care of it but is over at 100,000 miles. The dealer bought it back at a fair price.”
“My 2020 Deere 1025R is easy to drive, especially in tight places. It’s reasonably priced, very low maintenance and has low fuel consumption.”
“No job is too big for the 2015 Deere 1025R sub-compact tractor I bought used in 2019. It has never let me down. I use it with a backhoe to plant trees and to dig post holes in our hard soil. I use the bucket for everything from feeding hay to pushing snow. I highly recommend this little tractor.”
“I like my Deere 1025R subcompact loader tractor equipped with a drive-over mower and quick-tach bucket. It can cut brush in tight places and go under low trees where my larger tractor can’t go. The quick-tach loader brackets let me quickly switch from the bucket to a multi-purpose attachment I built myself that I understand will soon be featured in an upcoming issue of FARM SHOW.”
“I bought a new Deere 1025R subcompact tractor in 2015 and have never regretted it, although it has had a few factory glitches. I bought it with all the bells and whistles, and am glad I did.”
“This is the first tractor I’ve ever bought, and it was a retirement gift to myself,” says James about his 2017 Deere 1025R. “I use this 23 hp. tractor on my 52-acre property and on 85 acres of hunting land. It’s a hard working tractor for its size. I use it a lot to pull a bush hog and a 4-ft. disk. I really enjoy using it.”
“My Deere 1025R is a versatile small tractor. I use it for lawn mowing, snowblowing, grading, and bucket work.”
“I like my 1972 Deere 4000 diesel tractor. The later model 4000 to 4020 tractors were some of the best tractors ever made. They’re simple, powerful and dependable.
“I’m happy with my Deere 1025R subcompact utility tractor equipped with a frontend loader and mower.”
“I’m well pleased with my Deere 1025R sub compact utility tractor equipped with a mower and front-end loader. It’s a handy, versatile tractor. I especially like the drive-over auto attach mower deck, and the loader sure saves on our wheelbarrow.
“My 2010 Deere 7330 tractor has a lot of power in a compact size and is a joy to operate.”
Vernon owns a 2016 Deere 1025 R compact utility tractor equipped with an H120 front-end loader. “This tractor is well built and easy to operate. It has a lot of power.”
John Deere 1360 discbine
11 Best Buys1 Worst Buy“My Deere 1360 discbine with impeller has mowed hundreds of acres in all types of conditions. It never plugs and far outperforms any machine we have operated in past years.”
“I’ve used my 1987 Deere 1360 discbine to cut more than 200 acres of hay per year. It still runs great and has had only one bearing replacement. It still has the original belt.”
“My best buy is my Deere 2555 MFWD tractor equipped with a Deere 245 front-end loader. It has about 5,000 hours on it. I’ve replaced the water pump and tachometer but otherwise it has been trouble-free. I use it primarily for loader work but I haven’t had to replace the clutch yet.
“My Deere 1360 rotary mower/conditioner, which I bought used, cuts hay in all conditions, wet or dry, tall or short, and at speeds up to 14 mph.”
On the negative side, Henry says his Deere 1219 sicklebar-type mower-conditioner, which he bought new, caused him “nothing but trouble”. “In heavy hay the reel wouldn’t turn. Instead, hay would wrap around the reel belt causing it to slip no matter how much tension was on the belt. In wet conditions, such as second cut clover, the knife would plug up constantly. I couldn’t go more than 4 1/2 mph in the field and usually spent more time going backward – in order to clear the knives - than going forward. I traded it in for a used Deere 1360 rotary mower-conditioner and it’s a best buy. I’ll never go back to a sicklebar mower again.
“My Breeze windmill is a worst buy. I wanted to use it to aerate my pond to improve the water quality for cattle and fish. Unfortunately, vibration caused the tail section to break off which allowed the blades to hit the mounting pole. The machine was still under warranty so I returned it to the manufacturer. However, instead of replacing the blades all they did was cut the damaged sections from the ends of the blades. This reduced the performance as it required higher wind speeds before it would turn. The bearing on the crankshaft is too light and will only last about four to six months before it has to be replaced. Now the machine has developed an air leak and won’t build pressure. I’ve replaced every bearing and seal on the machine and rebuilt the pump, yet I still can’t seem to get it to work properly. This machine has been nothing but a big waste of money and time.”
Richard’s had good luck with his 1989 Deere 1360 mower conditioner. “I use it in all types of grass and alfalfa to mow 120 acres three times a year and haven’t had any downtime. It’ll mow even 6-ft. tall reed canary grass along my ditches. I use an International 784 75 hp tractor to pull it. I’ve had to buy only about $30 worth of knives a year. “My 1994 Stihl 036 chain saw is my worst buy. I like everything about it for a poorly located switch that controls the choke runoff. When you’re notching a tree and have gloves on, it’s easy to accidentally hit the switch with your thumb which shuts off the saw. That’s not too handy when you’re almost ready to fell a tree and your saw shuts off while cutting the notch.”
Jason Boyer, East Berlin, Penn.: “It makes nice tight bales at a rate of up to 25 bales per hour,” says Jason, owner of a“best buy” 1988 Deere 430 round baler. “My 1991 Deere 1360 disc mower-conditioner works great and will mow as fast as 1 want to drive.”
Pt » = aceeane ahaaesaess . OA Oe Best & Wo ( “Hydro-Tech silage preservative ismy worst buy. It’s designed to be sprayed onto silage and eliminate the need to cover bun- ker silos with plastic. It’s supposed to swell up and shed water, but with all the rain and snow we had, the top 12 to 1Sin.ofsilagein our bunker silo and 12 to 15 in, along the walls was ruined, It was nice not having to bother with tires and plastic, but it wasted too much silage.”
Dave Hauck, Utica, Minn.: “Nothing seems to slow it down,” says Richard about his “best buy” 1993 Deere 1360 rotary mower equipped with an impeller conditioner. “It does a good job of leveling gopher mounds, and has only half as many moving parts as other mower conditioners. So far all I've replaced are knives.”
David B. Overbay, Chilhowie, Va.: “Our 1990 Case-IH 885 is a handy tractor. It has dual pto shafts, a large capacity hydraulic pump, mechanical frontwheeldrive, and good power. My only complaint is the toolbox. It easily gets filled with dirt and is totally useless. “Our Versatile 415 culti-mulcher is a great incorporation tool, It doubled ourcom yields on clay upland soil. “Our Deere 1360 mower conditioner is an extremely efficient machine that makes sicklebars obsolete. We can replace the ‘knives’ on the disc blades for about $12. The machine is heavy, though. On hillsides it’ ll cause our International 1966 tractor to slide.”
David Dougherty, Pylesville,Md.: "It's an amazing mower. After 250 acres of mowing all kinds of hay in various conditions it still has the original knives,” says David about his “best buy” 1989 Deere 1360 discbine.
Robert Stock, Fergus Falls, Minn.: David Dougherty, Pylesville,Md.: "It's an amazing mower. After 250 acres of mowing all kinds of hay in various conditions it still has the original knives,” says David about his “best buy” 1989 Deere 1360 discbine.
Jack Strickler, Switz City, Ind.: “My 1989 Deere 1360 mower-conditioner makes hay mowing a pleasure.”
Steve Korver, New Oxford, Penn.: Steve's had good luck with his 1989 Case 1840 skid stecr loader. “I use itevery day on my dairy and turkey farm. It starts easy in cold weather and speeds up chores and manure hauling. “My 1989 Deere 1360 disc mower conditioner is another best buy. It cuts down and tangled hay faster than the New Holland 495 disc mower it replaced,” William McGuire, Maroa, Ill.; “It's the best vehicle I’ve ever owned,” says William about his 1990 Dodge Ram 3/4-ton pickup equipped with a Cummins dicscl engine. “Starts good in all weather, gets good fuel mileage, and seems to have almost unlimited power. “My Deere 9500 combine is another best buy. It works perfectly, is easy to operate, and does the best job of harvesting I’ve ever seen.”
Richard Noel, Highgate Center, VL: “It has plenty of power, comfort, and economy,” reports Richard, pleased with his 1989 Case-IH Magnum 7120 tractor. “It'll pull a 7-shank subsoiler 12 to 14 in. deep at 6 mph using 6 gal. per hour, The dealer and company have fixed all problems. “My Deere 1360 mower conditioner is another best buy. I’ ve used itto mow 300 of alfalfa, timothy, and reed canary grass. No breakdowns.”
John Deere 4010 tractor
10 Best Buys1 Worst Buy“Our 1963 Deere 4010 tractor worked fine for 27 years. It had a great design for the time.”
“More than 20 years ago my dad bought a small Makita angle grinder, and we still use it regularly.
“I like my Schnee’s winter pack boots (www.schnees.com; ph 800 922-1562). I have one pair that’s more than 10 years old. I wear another pair from November through March for working with cattle, logging, hunting and snowmobiling. These boots are warm, dry and long lasting.
“Our 2000 Honda Rancher 350 2-WD 4-wheeler is on its third set of tires. I abuse the heck out of this machine but it keeps right on going. No problems.
“My wife loves her 2011 Speed Queen washing machine (www.speedqueen.com). It has all metal parts and gears instead of the plastic parts found on many other brands, and it’s comparably priced and has a better warranty. Our farm clothes are very hard on washing machines, but we’re happy with this one.
“In 1996 we bought our first new Maytag washing machine. The main bearings on it failed about the same day the warranty expired. A technician fixed the machine, but it broke down again within a year.”
“At one time my uncle used his 1962 Deere 4010 tractor to do all the work on his farm, doing big jobs such as plowing and harvesting. We bought the tractor used from him in 1997 and use it every day on our farm to do smaller jobs such as disking, planting, mulching, raking hay, pulling hay and silage wagons, and operating a round bale processor. The engine was overhauled long ago and the tractor now has about 16,000 hrs. on it. I’ve made a few minor repairs on it and painted it in 2012.”
“I bought a 1962 Deere 4010 tractor in 1984 at a farm sale for $4,500 and used it as my main tractor for years. In 2008, I heard a noise in the engine that was caused by scouring of the no. 5 piston. My mechanic completely overhauled the engine at a cost of $9,000. Sounds expensive, but when you add the $9,000 and $4,500 to get $13,500 and then divide by the number of seasons I’ve used the tractor – 27 – it comes to a cost of $500 per year. The engine still had the original main bearings in it.
“In 2007 I bought a used Deere 4440 tractor. The dealer’s parts man asked me what kind of tractor I had been using up until then and I said a 1962 4010. He said simply, ‘tough act to follow’. Boy, was he right.”
“My Deere 4010 tractor always starts right up, has plenty of power, and doesn’t use much fuel. It’s sized just right for our 10-acre farm. I looked at other small tractors, but settled on this one because we have a Deere mechanic here on the island where we live. I haven’t had to use him, though.”
“It’s a fuel efficient tractor that’s easy to maintain, and parts for it are relatively inexpensive,” says Clayton, impressed with his 1985 Deutz Allis 6265. “It has a lot of lugging power and starts easy in cold weather. We’ve tried six other tractor brands in the past, but this one is the best yet.
“We’ve had trouble with the hydraulics on our mid 1960’s Deere 4010 diesel tractor, which we bought used. The tractor was taken to a couple of different mechanics where it racked up big bills, but it seems those repairs didn’t fix the problem.
“This tractor was supposed to be rebuilt when we bought it, but in cold weather it takes a big can of ether to start it. Or, we have to pull it 3/4 of a mile down the road before it’ll start. It seems there’s just not a big enough battery available on the market for what it needs to start. Also, parts for this tractor are expensive and complicated.”
Jerry’s happy with his Deere 4010 tractor equipped with a front-end loader. “This tractor does a great job of mowing, and the loader is easy to put on.”
A 1963 Deere 4010 tractor, which he bought used 15 years ago, rates as Bud’s “best buy”. “I’ve used this tractor to mow, do loader work, and to feed cattle during the winter. I haven’t spent a penny on it other than batteries and other routine stuff. The amazing thing is that it’s worth more today than it was when it was new.
“I put about 190,000 miles on my 1992 Chevrolet Suburban and never touched the engine. The bad news was that I had to replace the transmission four times.”
“My 1962 Deere 4010 tractor has been more or less totally rebuilt over the years but is still a great tractor. It’s my best buy of all time.”
James is a dealer for Star Choice satellite TV systems which he says is a “best buy.” “I’ve had problems with less than 5 percent of all the systems I’ve installed. Being a dealer is a rewarding and enjoyable way to supplement my income.”
“I retired from farming in 1994. At the time of my retirement I had a Deere 4010 tractor which I had bought used and operated for 16 years. The only work I had to do on the engine was to rebuild the water pump twice and replace the fuel pump once. I really liked that tractor.
“I also had a best buy International Har-vester Wheatland 560 tractor equipped with a diesel engine. It was a very rare model that was sold mainly in the winter wheat areas of western North Dakota and Montana. It had a quite short wheelbase and a short turning radius, which made it ideal to use on my double Rowse mower.”
Stanley nominates his 1999 Honda 300 Four-Trax ATV as his “best buy”. “It’s a very dependable machine that rides easy and can go anywhere on our farm. I use it almost every day to do farm chores. I mounted homemade metal baskets on both the front and rear racks to make it easier to haul tools.
“I’m well pleased with my Deere 4010 tractor. It’s a dependable machine.”
Larry has “sentimental ties” to his 1962 Deere 4010 diesel. “Our neighbor bought it new when I was eight,” he says. “He died and I bought it in 1984. This tractor was built with much thought and has stood the test of time. It’s a good universal tractor for many jobs.
“I put a Lundeen cab on it and like it well because of the good visibility and sliding doors.”
John Deere 7000 planter
10 Best Buys1 Worst Buy“My best buys are my International3588 front wheel assist tractor, International 1460 combine, Deere 7000 planter, and M & W 450R grain dryer. In my opinion these machines were ahead of their time in the way they were designed. I’m proud of them today. Hats off to the engineers.”
“My Deere 7000 planter was equipped with disc openers when I bought it, but I switched to a shoe planter because I wanted a better seedbed. I also installed no-till equipment on it, including two 8-wave coulters per row that are spaced 3 inches apart. I made the modifications because I wanted to do one-pass tillage and then plant corn.”
Leonard’s had problems with his 1980 Chevrolet K-20 4-WD pickup. “I’ve replaced everything on it except for the paint, but the pickup still causes me a lot of trouble. I’ve replaced the engine three times, the transmission twice, and the transfer case. It now has a factory-rebuilt engine that uses about a quart of oil every 100 miles. I’ll never buy a GM product again. “I’m also not happy with my Deere 7000 planter. It works okay but not like I expected. To get adequate performance I’ve had to install a lot of ‘kits’ on it. It’s an expensive planter to operate.”
David Dowling, Lohrville, lowa: “I think the seedboxes on older Deere 7000 and Kinze planters should be made from clear plastic so you could see the seed level without having to remove the lid. The lids should seal tighter, and the boxes should have increased capacity and a sloped bottom to get all the seed out.”
Don Ward, Chula, Mo.: Don bought a used Deere 7000 no-till planter and says it’s his “best buy”. “Works great and distributes seed corn evenly. “My 1994 Ford F-150 SuperCab pickup has an excellent cab and rides comfortably. I'm impressed with how the back seat folds down to carry luggage, etc. The 351 cu. in. engine is fuel efficient.”
Delbert Bauersachs, Pinckneyville, Ill.: “T’'m well satisfied with my 1992 Case-IH 7150 tractor. It has 790 hours on it with no problems. It’s easy to handle and the powershift transmission works great. It's fuel efficient and, with well over 215 hp, it'll outperform my Case 2670 in the field, I use itto pull my 1992 Case-TH 496 32-ft. disk in 9th or 10th gear. The disk does a good job leveling and is also a best buy. I also use it to pull my Great Plains 20-ft. no-till drill at 9 to 10 mph. The drill does a super job. planted 6,000 acres with it and had to replace only one press wheel bearing. “I sold my Deere 7000 8-row, 30-in. planter and bought a Kinze 8-row, 30-in. planter. It’s a best buy. The Deere planter was built too light and bearings were always going out. It went through over 25 bearings in three years. The Kinze planter is built heavier so I haven't had any bearing problems in three years. My only complaint is that it doesn’t plant as evenly as the Deere planter. “My 1987 Case-TH 2294 tractor has 2,450 hours with no major problems. And I think my 1991 New Holland TR96 combine is the best combine on the market. It shells up to 1,900 bu. of corn per hour.”
Ray McCormick, Vincennes, Ind.: Ray “They solve all problems associated with planting no-till corn.” nominates his 1991 Martin Row Cleaners as “best buy” (see FARM SHOW'S Vol. 16, No. 2 or contact Howard Martin, Kentucky Farms Inc., 169 Allegre Road, Elkton, Kent. 42220 ph 502 265-5817). The cleaners consist of two V-mounted notched wheels positioned close to the planter’s seed opener discs. “They bolt directly onto my Deere 7000 flexfold planter in just minutes. They solve all problems associated with planting no-till corn. The units run smooth without ‘hair pinning’ the residue and allow the seed slot to be easily closed.”
Danny Mannel, Jefferson, Iowa: “It's the best field cultivator on the market,” says Danny, owner of an International 4800 equipped with a Triple S Engineering harrow adjuster kit (Triple S. Engineering, Inc., Rt. 2, Box 200A, Griswold, Iowa 51535) that he read aboutin FARM SHOW. “The Kinze brush-type seed meters on my planter are also a best buy. “T also like the Depth-A-Matice gauge wheels on my Deere 7000 planter. I wouldn’t go to the field without them.”
Ed Rigel, Leipsic, Ohio: “My Deere 7000 corn planter is trouble-free. It’s a best buy. “My worst buy is a Long 1199-B 3-pt. backhoe. It breaks every time we use it and then we have to wait six weeks for parts. It’s useless.”
Delbert Bok, Sherwood, Ohio: Delbert is the satisfied owner of a 1982 Deere 7000 planter. “It does an accurate job of planting and places seed at the desired depth. I made 15-in. splitter row units and mounted them on it for planting soybeans,”
Wilbur Smith, Erie, Mich.: Wilbur's “best buy” is the Duo-Rate sced changer he installed on his Deere 7000 Max-Emerge planter, “It's worked well for seven years.”
John Deere 7800 tractor
10 Best Buys1 Worst Buy“I leased a Deere 7800 tractor for one year and then bought it the next year. The third year I sold it to my son, and that’s when the problems started. The tractor required several overhauls and had transmission problems and more. I guess this tractor was just a lemon that some other poor soul will end up with now, as my son traded it off. I’ve been a Deere man since the days of the old G model. I used to think Deere made the best tractors, but now I’m not so sure.”
“My Deere 7800 tractor is comfortable and easy to operate. “My Spray-air 2272 72-ft. pull-type sprayer is a best buy. It lets me kill weeds with half rates of chemical and paid for itself the first year. “My worst buy is my 1992 Flexi-Coil 130-ft. shielded sprayer. It was so wide that one end drooped down. As a result the shields would hang low and were always getting knocked down into the spray pattern. Perhaps a model less than 100 ft. wide would work better.”
“My 1994Deere 7800 tractor is a pleasure to drive. The 19-speed powershift transmission shifts smooth yet is aggressive.
“My 1994 Case-IH 600 forage blower does an excellent job with a minimal horsepower requirement.”
Milton Devermann, Harvard, IIL: “A DR trimmer/mower from Country Home Products in Charlotte, Vt.. is my best buy. It's a string trimmer on wheels with a battery start Briggs and Stratton gas engine. I've had it for a couple of years and it starts, runs, and works great. I use it to cut grass and weeds along the edges of corn and bean fields where the ground’s too rough for a tractor or there’s no room,” Donald L, Larsen, Harwood, N. Dak.: Donald’s “best buy” is his new Deere 7800 MFWD tractor equipped with a 19-speed “powershift” transmission. “The MFWD provides good traction and the gauges are well-placed and big enough to see easily. The cab has good visibility in all directions and a comfortable seat, The engine has very good torque.”
Donald L, Larsen, Harwood, N. Dak.: Donald’s “best buy” is his new Deere 7800 MFWD tractor equipped with a 19-speed “powershift” transmission. “The MFWD provides good traction and the gauges are well-placed and big enough to see easily. The cab has good visibility in all directions and a comfortable seat, The engine has very good torque.”
John P. Voigt, South Haven, Kan.: John's the satisfied owner of a 1987 Ford F-250 diesel pickup. “When I bought it Ford used the same exhaust system on both its gas and diesel models. However, the exhaust system had too much back pressure for the diesel engine so I had a new stainless steel exhaust system and a new air cleaner installed. Now the 6.9-liter engine has about the same horsepower as a 7.3-liter engine. The pickup is built heavy and I likeit. “In August 1991 I purchased a new Deere 2355 MFWD tractor equipped with a Deere 245 loader and no cab, It’s the biggest small tractor I've ever owned, I really like how it shifts. I traded a Ford in on it and am glad that I didn’t buy another Ford. One problem is that most Deere dealers order this tractor with economy hydraulic outlets which I had trouble using. I waited until Deere had one of its half price sales, then bought a set of standard plug-ins. “I recently purchased a Deere 7800 MEFWD tractor equipped with a power quad transmission. like the transmission as well as the tractor’s large cab, comfortable seat, and easy-to-fill fuel tank. I traded in a 1988 Deere 4450 MFWD tractor that had 1,100 hours on it. It rode so hard it hurt my back, and it seemed like it was always in the shop for minor repairs.”
Richard Flanders, Calvin, N.Dak.: “I really like my 1993 Deere 7800 MFWD tractor. It’s fuel efficient, dependable, and has plenty of power. I'm well satisfied with it. “My worst buy is my Woods RM372 3pt. riding mower. The gauge wheels fell off during the first hour of use. Another problem is that it leaves a strip of unmowed grass between the left and center blades. I've owned four other Woods mowers and all of them worked fine, but this one is a joke.”
Jule Jacobson, Porter, Minn.: “I bought my 1993 Deere 7800 tractor to replace a 4year-old Deere 4455. It's my best buy. It ( 1} Q.<—FARM SHOW °« 15 Best & Wor ( has much improved visibility and steering, increased litt on the 3-pt, hitch, good hydraulics, more power, and a power quad transmission, It's a great tractor.”
Ross Lunn, Wallacetown, Ontario: “We boughtour Deere 7800 MFWD tractor a year ago and have about 600 hours on it with no problems, It has a lot of power and I really like the power quad transmission. I also like the front wheel assist.”
Eldon E. Gabel, Akron, Iowa: “It does everything claimed by the company and is one of the best tractors I’ve ever used,” says Eldon, owner of a 1992 Deere 7800 tractor. “Tthas about 600 hours on it. Comfortable to operate with good visiblity.”
Robert A. Scott, Avoca, Iowa: “I like my 1993 Deere 7800 tractor. It has excellent visibility and great pulling power for a 150 hp tractor. The company is finally listening to farmers before building new products. The cab is moved ahead and the wheel base lengthened, giving it an excellent ride.
John Deere 4230 tractor
8 Best Buys2 Worst Buys“I’m generally satisfied with my 1994 Deere 8760 tractor.
“My 1974 Deere 4230 tractor has more than 11,000 hours on it but still works great. It has never needed a major repair.”
“Our ‘best buy’ is a Deere 4230 tractor we purchased new in 1973. We overhauled the engine at 8,640 hours and it now has about 12,400 on it. We installed 50 series pistons when we overhauled the engine so it starts easily in cold weather. We use the tractor for all our spraying and snow-plowing, and the pto works well to fill our grain dryer with our 10 by 16-in. auger.”
“It’s the best tractor we’ve ever owned,” says Parkes about his Deere 4230. “We bought it used in 1972 from a Texas horse farm and have had to make only a few small repairs on it.”
Rondel has had few problems with his 1976 Deere 4230. “I like the power shift transmission and cab. It starts well in the coldest weather and offers good fuel economy,” he says. “I only wish I could find a new command arm, like those on the 8000 series Deeres, installed. I hope Deere or someone else comes up with a retrofit kit.”
Rondell added a Buckeye front 3-pt. hitch to his tractor for hauling hay, spraying and blading. He also installed a factory turbocharger to increase torque and improve fuel economy.
“My best buy is my Deere 4230 tractor which I bought used six years ago. It works fine and is big enough to handle a chisel plow, yet nimble enough to handle a Haybine.” Paul and Karen Dotterer, Union
Warren Wing, Newkirk, Okla.: “My worst buy is my Deere 4230 tractor, It worked alright for light work such as baling, swathing, planting, etc., but used a lot of fuel even on light loads. The dealer's mechanic got it up to 100 hp, barely, but it still wouldn't pull my 4-bottom plow. It always ran hot and the 3-pt. hydraulics never worked right. Also, it ate up a lot of fuel. Deere really goofed when they replaced the 4020 with this model.”
Gene Eckmann, Bloomfield, Neb.: “My 1989 Deere 185-hydro lawn mower is my all-time worst buy. bought it used four years ago for $2,500. After a short period of time it started using a quart of oil every time we mowed. The 17 hp engine was completely overhauled, but then it wouldn't start. It mows the lawn unevenly, leaving strips between the blades. The front axle assembly fell off and it took an entire day to put it back on because two small bolts were located in a hard-to-reach position, The next time we used it, the engine leaked a quart of oil and started making a clanging noise like it was going to throw a rod. I'm disappointed with this product and feel that the cost of parts and repair work is too high. I plan to replace it. “My best buy is my 1973 Ford F-100 pickup equipped with a 390 cu, in. engine, It's on its second engine and runs like a charm, It’s the most reliable vehicle on our farm.” John D, Parker, Gates, N.C.; “Llike my Deere 4230 tractor. It has 10,000 hours on it and the engine has never been overhauled.”
Harold Nold, Oconee, Ill.: “My best buys are my 1975 Deere 4230 tractor, 1968 Deere 2510 tractor, and 1990 Remlinger RTC-600 M-roller tine cultivator. No down time on any of them.”
Glen Grice, Beechy, Sask.: Glen has over 5,000 hours on his “best buy” 1974 Deere 4230 tractor. “It still has the original alternator which has never been repaired. I’ve never had any trouble with the engine or transmission, It’s a real workhorse.”
Mary Riemenapp, Dodgeville, Wis.: “We can depend on our 1977 Deere 4230 tractor to perform in the field or do any job. It very seldom needs major repairs. It's handy and tough.”
John Deere 2355 utility tractor
8 Best Buys1 Worst BuyThomas likes his 1992 Deere 2355 utility tractor. “It has more power and is more fuel efficient than the Deere 730 it replaced. One complaint, however, is that using the clutch and backing up at the same time is difficult because the seat doesn’t swivel. Also, the 3-pt. lever is mounted too low, making it hard to reach conveniently when backing up.”
“I’m not too pleased with my new Coleman 10 hp, 5,000-watt generator. The output voltage of the generator is determined by engine rpm’s. The company manual - which we never got - stated that the output voltage was factory set. It sure was - at 135 volts. The generator doesn’t have a volt meter on it so I had to purchase a volt meter in order to find out what the voltage was.
“I’m well pleased with my 1992 Deere 2355 utility tractor which replaced my previous Deere 730 model. The 2355 has a lot of power and is fuel efficient and easy to service. The only problem I’ve had is when I back up and use the clutch at the same time -the seat doesn’t swivel and the 3-pt. lever is mounted too low to be reached conveniently when backing up.”
William Finch, St. Johnsville, N.Y.: “My Deere 2355 tractor equipped with front-end loader is a pleasure to operate and is built rugged. Accessories are convenient to operate. It’s big enough to handle all my hay raking yet compact enough for routine chores around the farm. continue to.find more uses for the loader.”
John P. Voigt, South Haven, Kan.: John's the satisfied owner of a 1987 Ford F-250 diesel pickup. “When I bought it Ford used the same exhaust system on both its gas and diesel models. However, the exhaust system had too much back pressure for the diesel engine so I had a new stainless steel exhaust system and a new air cleaner installed. Now the 6.9-liter engine has about the same horsepower as a 7.3-liter engine. The pickup is built heavy and I likeit. “In August 1991 I purchased a new Deere 2355 MFWD tractor equipped with a Deere 245 loader and no cab, It’s the biggest small tractor I've ever owned, I really like how it shifts. I traded a Ford in on it and am glad that I didn’t buy another Ford. One problem is that most Deere dealers order this tractor with economy hydraulic outlets which I had trouble using. I waited until Deere had one of its half price sales, then bought a set of standard plug-ins. “I recently purchased a Deere 7800 MEFWD tractor equipped with a power quad transmission. like the transmission as well as the tractor’s large cab, comfortable seat, and easy-to-fill fuel tank. I traded in a 1988 Deere 4450 MFWD tractor that had 1,100 hours on it. It rode so hard it hurt my back, and it seemed like it was always in the shop for minor repairs.”
R.D. Camper, Centralia, Ill..: “My 1993 Ford 7740 SL turbocharged diesel tractor is my best buy. The cab is the best on the market. It’s roomy and comfortable, has easy-to-use controls, and great visibility. The tractor has a short turning radius. “My Deere 2355 diesel tractor is my worst buy. Gears grind when shifting. Hydraulic outlets are difficult to reach, making it hard to hook up the hoses. The 3pt. control lever is poorly located. You'd have to have a 5-ft. long arm to reach it.”
R.D. Fricker, De Valls Bluff, Ark.: “My best buy is a Long 1200 3-pt. backhoe that I bought used from a farmer who had used it on his Deere 4020 tractor. The tractor’s -high oil pressure and high volume of oil caused it to leak quite a bit of oil. I had the main valve rebuilt for $50 and replaced some hoses. I bought it to use on my Deere 2355 tractor, but might also use it on my Deere 4620. installed a ‘T’ in the hydraulic line between the pressure control valve on the tractor and the hydraulic cylinder valve and ran a hose from the T to a Prince RD150-16 adjustable 0-16 gpm flow control valve that I bought from Northern Hydraulics (ph 800 533-5545). I had to use the flow control valve because the backhoe uses only uses 8 gpm. The return line goes to a porton the hydraulic oil filter cannister. “Tuse the backhoe to dig ditches, remove stumps, and transplant small trees and bushes. I also use it to repair levees and to ( )\9.~2— #£=£pape cunw.ac Best & W ( drain rice fields.”
David Fricker, DeValls Bluff, Ark.: “My best buy Deere 2355 is a versatile tractor. I use it to pull a 6-row planter and cultivator, as well as a 16-ft. International grain drill, harrow and roller in fifth gear. It’s fuel efficient. If] had the money I'd buy another one. “My 1989 Ford F-150 pickup equipped with a 302 cu. in, V-8 engine and automatic transmission is a best buy. It’s a good working truck. I use it to tow a double axle trailer with 8,400 Ibs. of seed. It gets 22 mpg. 46+ FARM SHOW \ 14 Vorst Buys vious page) However, I recommend removing the original muffler and installing a free-flow muffler and an air-flow tailgate. It has 47,000 miles with no problems. However, I wish I could tighten the front wheel bearings without having to use shims.”
David E. Sauls, Smoaks, S.C.: “It could be a little quieter,” says David, who otherwise is pleased with his Deere 2355 tractor. “It’s fuel efficient and has plenty of power for operating my grinder, baler, and 4-row cultivator, No problems, It’s a good allaround tractor and a pleasure to operate. “My 1992 GM 4-WD pickup equipped with a 350cu. in. V-8 engine is quietand has plenty of power for pulling trailers, Handles great and is fairly fuel efficient at 14 to 15 mpg.”
David L. Hasty, Shelbyville, Tenn.: “It's fuel efficient and very well built,” says David about his “best buy” 1987 Deere 2355 tractor equipped with a 1991 model 175 loader. “I haven't had any trouble with it. have two uncles who purchased 2355 tractors within a year after I bought mine. They’ vehad good service, too. Deere makes well built and engineered tractors.”
John Deere 265 lawn tractor
8 Best Buys1 Worst Buy“My best buy is a 1988 Deere 265 lawn tractor that I’ve had for over 15 years.
“All of my Milwaukee power tools (including impact wrenches and drills) are dependable and easy to use.
“My Cannon gun safe is my worst buy. The safe itself is okay, but their customer service is the pits. We had trouble opening it, so we called Cannon. They said to send a picture plus $50. They also needed a certified and notarized letter and then they would send a new code. I did that but have never been contacted by them. I had to go to a private locksmith to open it.”
“Our 1987 Deere 265 riding mower has taken a licking but still works great. We’ve replaced the deck belts and bearings but it has had no major problems. We also like our 2010 Deere 2305 tractor.
“Our DR field and brush mower is equipped with a 5 hp Briggs & Stratton engine and on just about every start it pulls the starter cord out of my hands, inflicting pain in my hand. I should have bought an electric start model.”
“It has a comfortable ride, plenty of power and isn’t too hard on fuel,” says Wayne about his 2001 GM 2500 pickup equipped with a 6-liter engine.
“My Deere 265 disc mower is balanced well with the tractor, and its blades are easy to change. I can cut in the field as fast as I care to drive. I use a 50 hp Deere 2240 tractor to pull it.”
Harvey Melcher, Friendswood, Texas: Harvey's two best buys are his 1994 Deere 265 riding mower and his 1991 2555 Deere tractor. “I do custom mowing and landscaping so I use my equipment every day. These two latest Deere purchases are, to date, trouble-free. The tractor has a detachable front end loader, also trouble-free. I use a 10-ft. and a 15-ft. flex mower deck and the pto on the mower has also been trouble-free. “If anyone's interested in buying a used mower, I'll consider almost any offer for my Modern (Beaumont, Texas) 8-ft. rotary mower, It’s called the “Super Commando,” but I call it my super worst buy. We've had to rebuild both tailwheel assemblies with l-in. thick steel to keep them from constantly bending. The wheel bearings are designed so vines constantly get in and destroy seals. It has many other problems, too,”
Billy R. Snider, Dundas, IL: “My best buy is a Classic outdoor wood buming furnace (Central Boiler, Inc., Greenbush, Minn.). This efficient unit heats our house and all our hot water. It sits outside sol don’t have to worry about fire or carbon monoxide in the house and it doesn’t take oxygen or humidity outof the house. Ican fill it with wood and then forget about it for two or three days. You can run the shower all day without running out of hot water. “My 1991 Deere 265 riding mower with a46-in. deck is my worst buy. When it was new it was hard to start. The engine would quit at least once or twice every time I mowed the yard. It took the dealer two years to solve that problem. I solved the starting problem myself. It does a good job on level ground but gouges on uneven ground. wish it had foot-operated hydrostatic controls instead of hand-operated controls. Also, I don’t like the hand lift. It has to be all the way up or down before the deck can be locked in place. I think there are better riding mowers on the market for less money.”
Norman Pohler, Spalding, Sask.: “It gets only 16 mpg on the highway,” says Norman, who is otherwise pleased with his 1993 Ferd Explorer 4-WD utility vehicle. “The 6-cyl. engine has plenty of power and there’s a lot of room for gear in the back. Rides nice.” Norman also likes his 1990 Deere 265 garden tractor. “The mower and rototiller can be easily switched. It has a lot of power and I like the hydrostatic drive transmission, It’s built better than other brands I’ve used. No problems. Handles comfortably and has tilt steering and an adjustable seat.”
Jon C. Rastede, Ebensburg, Penn.: “I'm well satisfied with my 1992 Deere 265 riding lawn mower. It does an excellent job, has plenty of power, and is easy to use. Ithas a strong frame. However, it could use foot controls for forward and reverse.”
Edwin Surface, Waynesville, Ohio: A 1991 Deere 265 garden tractor equipped with a 46-in. mower deck rates as Edwin's “best buy”. “Ithas almost 200 hours and still works great. However, I have to clean out wet grass from under the deck occasionally. I really like the hydrostatic transmission. I'd prefer that the engine didn’t automatically stop whenever I leave the seat, but that’s typical of government regulation,” Wes Suddarth, Lebanon, Tenn,; “It has 104,000 miles with very few problems,” reports Wes, pleased with his 1981 Ford F150 4-WD pickup equipped with a 300 cu. in. 6-cyl. engine. “My total repair bill over 12 years has been less than $400 (water pump, starter, new brakes, etc.). “My 1992 Bush Hog 15-ft. rotary cutter is easy to maintain and works great.”
Gary Gerdes, Glenwood, Minn.: “My 1989 Deere 265 lawn mower has over 300 hours and is still going. I've never had any trouble with it.” Gary’s 1989 Ford 700 series truck is a “worst buy”. “It has only 20,000 miles on it, but has had lots of problems. At 3,000 miles the water pump wentout. I had to wait about six months before a new one was installed. The carburetor and the exhaust system are bad and the radiator leaked. The air pump is also bad. I ordered a new one three months ago, but I still haven't got it.”
John Deere 530 round baler
9 Best Buys0 Worst Buys“Back in the early 1960’s my dad bought a new Deere 530, which was a great tractor. I traded it for a Deere 4030, which turned out to be a worst buy because of problems with the hydraulics.
“I’m still riding my 1928 Harley Davidson motorcycle, which is now worth about six times more than what I paid for it.”
Ron says his best buy ever is his 1988 Deere 530 round baler that he bought new. It has made nearly 50,000 bales. “I quit keeping track at 43,000. I’ve had very limited repairs on it.” Instead of paying the original new price of $27,000, Ron bought it at the clearance price of $20,000 when Deere’s 535 model was introduced. “It’s been good. The pickup teeth on this particular model were an inch longer and it feeds hay into the baler better.”
Ron also has a maintenance trick he uses and thinks that has helped his baler rack up such a phenomenal performance record. “I put a liter and a half of gear oil into the rollers, so the oil can seep through the seals and keep the bearings greased all the time. There’s only one drawback to it. You have to park it on the level over night, otherwise the oil will seep out and run down the side of the baler. I started doing this when the baler was about 3 years old. I’ve never had to replace any of those bearings that have had oil in them so it has saved a lot of maintenance time. This has just been a tremendous machine.”
Reid Knapp, Iron River, Mich.: “One of my best buys ever is a 1997 Jeep Wrangler with a Snoway snowplow. Living in northern Michigan we have our share of cold temperatures and snow. The Jeep always starts and it’s amazing the snow it can move for its size. Another plus is that we get at least 22 mpg for our local runs in the summer.”
James Jendro, Atlanta, Texas: “My worst buy is Dura-Coat coating for shop and garage floors that’s designed to fill cracks, holes and pitted areas. It’s supposed to eliminate painting and stop rust and corrosion dead in its tracks. I used the product but it didn’t fill cracks and it got stained with tire marks that would not come off. The product was guaranteed for 2 years and they did replace it once but the replacement covering wasn’t any better than the original. When I called a second time the representative on the phone was very rude.”
“The Massey Ferguson 282 tractor I bought in the fall of 1984 has more than 12,000 hours on it and is our best buy. We’ve used it to help make more than 20,000 small square bales. This tractor was used to cut all our hay until 1999 when a piston went out. We overhauled the engine and today the tractor is still going strong.
“Our Deere 530 baler is a best buy. We’ve used it to bale all our hay since 1985 and it’s still going strong.
“Our 1999 Murray 46-in. riding mower is our worst buy. The engine went out only eight months after we bought it. It was supposed to be guaranteed for two years but we bought the mower from Walmart and they won’t do anything. All they say is that they’re sorry.”
“Other than a valve job on the engine it has never failed me,” says Kenneth, impressed with his 1959 Deere 530. “It’s a basic tractor but it still works well. The wiring on it tended to short out, but it was always easy to find the problem.”
Jane and Bill Armstrong, Crystal
“Three years ago I bought a used 1989 Deere 530 round baler. It’s my best buy. It has a lot of capacity and makes a nice bale. I use it to make brome alfalfa bales that average 1,530 lbs.”
Edward’s the owner of a Deere 530 round baler. “We’ve used it for nine years and have made about 14,000 bales with it, yet it still has the original belts. “OurDeere twin hydraulic rake is a pleasure to use. It helps us make solid bales with hard, slick ends.”
John Tibben, Kincardine, Ontario: John’s the satisfied owner of a 1993 Cheyrolet 3/4-ton 4-WD pickup equipped with a 6.5-liter turbocharged diesel engine. “It has lots of power and gets excellent mileage on long trips - about 25 mpg on the highway and 20 to 21 mpg around town, It rides like a car and is nice and quiet. Starts right up even in the coldest weather. “My 1989 Kubota M6950 DT tractor isn’t really a worst buy because it does everything we want it to and starts good in winter. However, parts for it are expensive. For example, a simple work light switch sells for $73. Another problem is that it’s hard to service. You need the fingers of a newborn baby to work in some of the cramped spaces. “My Deere 530 and 535 round balers have both been best buys. I made 15,000 bales with the 530 before I traded itin for the 535 and I made 17,000 bales with it before trading for a new 535 equipped with net wrap. We'll see how well the new one works. Ido some custom baling and a lot of people ask for these balers. They make tight bales that do a good job of shedding water. Net wrap should help even more.” James Greer, Gorrie, Ontario; James's 1992 Case-IH 8520 in-line square baler heads his “best buy” list. “I've used it to make over 40,000 bales with little downtime. It can make up to 400 bales per hour with minimum leaf loss because it has a low pickup height and because hay doesn’t get handled as much before being tied because there's no cross auger. It makes firm, square bales that truckers really like, “Two years ago I bought a Harco 45-ft. bale elevator. It’s well-built and should last a long time. My only complaint is that it’s too heavy to be easily moved around. To solve the problem I had a friend mount a wheel under the front of it.”
Robert L. Stobaugh, Atkins, Ark.: “One of the best buys we’ve ever made is our rice levee builder equipped with a hydraulicpowered seeder built by Hula Mfg. Co. (Hazen, Ark. ph 501 255-3028). Anyone with 250 acres or more of rice can pay for it intwo years, This levee making and seeding machine saves us money in many ways. On some of our heavier ground we had been making as many as seven trips on one levee to ensure good water retention, but with this machine we never made more than four trips anywhere on our farm last year. Not only do we save time and money by making fewer trips, but we also hold more water where itshould be. We've been able to grow soybeans right next to a rice field where soybeans had drowned in the past because of leaking levees. We can fill the 18-bu. seed hopper with the same bulk seed handling equipment that we use to fill our Deere 530 grain drill.”
Norman Farrington, Olin, Iowa: Norman's “best buy” is his 1988 Deere 530 round baler. “This is my second 530 baler. I used the first one for 3 years and made 8,000 bales. This one’s made 7,000 bales. Very few problems with either baler. “My 1988 Vicon 1350 double wheel rake is another best buy. It rakes fast with very litle leaf loss. We had some trouble at first bul service was good and we erded up with an even stronger machine”
John Deere 5410 diesel tractor
8 Best Buys1 Worst Buy“I bought my Deere 5410 diesel tractor used with less than 1,000 hours on it. It always starts right up with no fuss. I use it to blow snow with an Erskine front-mount snowblower (ph 800 437-6912; www.erskineattachments.com) which has been trouble-free, and to cut 6 acres of grass with a Deere 10-ft. bush hog. I love the quiet cab with air conditioning, heater and stereo.”
“This tractor has worked great without requiring any major repairs,” says Tim about his 2001 Deere 5410. “I use it to mow, bale hay and clean my barn.”
“My Deere 5410 tractor is my worst buy. At 800 hours the brakes seized up and cost $2,800 to fix. The clutch went out at 1,400 hours and cost $3,000 to fix. However, the tractor works great otherwise.”
“In FARM SHOW’s Vol. 24, No. 4 issue, Daniel Stokes of Omro, Wis., reported that his 1999 Deere Gator was leaking gas into the oil. I’m having the same problem with my 2000 6 by 4 Gator. The spark plugs foul out and the engine backfires. The Deere dealer has worked on it several times without success so I bought a new carburetor. That didn’t solve the problem and gas is still leaking into the oil. Does anyone have an answer for this problem?
“In FARM SHOW’s Vol. 25, No. 6 issue, Larry Blockard of Hartman, Ark., said he was having trouble with fuel leaking from the fuel cap on his 1999 Deere 5410 tractor. My 2000 Deere 5310 tractor also leaks fuel out around the fuel cap. I discovered that the cap couldn’t be screwed down far enough on the tank’s plastic neck because the threads on it were faulty. I installed a new tank which solved the problem.”
“It’s a great tractor,” says Claude about his Deere 5410 tractor equipped with a front-end loader. “I’ve used three other Deere 5400 series tractors and they’ve all worked good. The 5410 has great resale value and hasn’t required a lot of repairs.”
Larry likes his 1999 Deere 5410 tractor equipped with a front-end loader. “It has a lot of power and is nimble. It works great as a loader-tractor. My only complaint is that it could use a better fuel tank cap.”
“My Deere 5410 equipped with a front-end loader is a great tractor. I’ve used three other Deere 5400 series tractors and they’ve all worked good. The 5410 has great resale value has not required a lot of repair work.”
“I bought a Deere 5410 tractor 3 1/2 years ago. They had a recall on the clutch push rod last summer and replaced it with a new type of rod. Last February I was using the tractor to pile up brush and the new rod came loose. I didn’t get the tractor stopped until I got up into the brush pile. I’m glad I wasn’t burning the brush or else I would have burned up my tractor. I stopped the tractor by turning off the key. The problem was that the nut on the upper end of the push rod had come off. The company needs to redesign this rod so the nut won’t come off.”
James says he’s generally satisfied with his 1998 Deere 5410 tractor but that it could use a few improvements. “The company needs to fix the parking gear. Whenever you park the tractor on a hill and put it in parking gear, you can’t get it back out of gear when you want to move. You have to use another tractor to push or pull it a little in order to get it out of parking gear.”
John Deere 790 tractor
9 Best Buys0 Worst Buys“We bought a Deere 790 tractor to replace our Case 250, but it’s not as good a machine. It doesn’t have as much lifting capacity, and attaching implements is a much more difficult job. I wouldn’t buy another one. The only positive is that it starts easier.”
“We’ve used our Deere 790 mid-sized tractor on a thousand jobs during the last few years - everything from cleaning pens to doing road work, lifting shop projects, mowing, and hauling firewood. No problems.”
A 2005 Deere 790 diesel loader tractor equipped with a backhoe rates as Peter’s “best buy”. “It always starts right up and has required no repairs. With chains on all four wheels I can plow snow up a mountain road with a 300-ft. rise. I’ve also used this tractor to haul logs from the forest and to move large amounts of soil and tree stumps. It’s enjoyable to drive.”
Robert’s happy with his 2000 Deere 790 tractor. “No machine is perfect including this tractor, but the company fixed whatever defects the tractor had under warranty. It has about 600 hours on it yet is still worth 80 percent of what I paid for it. Now I’m in the market for a larger tractor that can handle a snowblower, and I plan to buy another Deere.
“My Bobcat S130 skid loader has had more problems in 6 months than the Deere 790 had in 10 years. The dealer charges for warranty service and I’m getting no support from the company. I had to spend $2,000 on repairs but the machine still doesn’t work right. Whenever the temperature is between 30 and 45 degrees it won’t start. By trial and error I found that to start it you have to turn on the key to pre-heat for whatever time the computer determines, then turn off the key and turn it back on to pre-heat for a second time.
“The dealer offered 50 cents on the dollar to buy the Bobcat back with fewer than 100 hours on it. In my opinion, this machine is pure junk.
“My Ariens and Husqvarna riding mowers are both great machines.
“My Bolens wood chipper worked only 3 hours before it quit working. It turned out the air filter was clogged with dirt, and they charged me $60 to replace it. The machine never worked right after that, and the company has been of no help. The dealer eventually bought it back for 25 cents on the dollar.
“My Delta and Dewalt power tools – including table saws, handheld circle saws, plug-in and battery-operated drills - are all best buys. They’re reasonably priced and last a long time.”
Jack likes his Deere 790 tractor equipped with a 5-ft. loader. “I use it with a 6-ft. finish mower and several other attachments, and it saves a lot of work. It’s a dependable tractor.
“My 1985 Chevy pickup was a lemon from the day I bought it, and I couldn’t wait to get rid of it. The engine didn’t have enough power to pull a trailer with a tractor loaded on it. It just seemed to be struggling all the time.”
“My 2002 Deere 790 tractor equipped with a Deere 419 front-end loader is my best buy. The loader is awesome. I use it to move snow and to grade a gravel road.
“I’ve used my 1990 Stihl 028 chain saw to cut more than 200 cords of wood and it’s a best buy. One time I accidentally ran over the saw with my truck, but it still cuts great anyway.
“My Troy-Bilt push-type weed eater is my worst buy. It wouldn’t cut for three minutes without throwing cutting twine off. This weed eater is impossible to push on anything other than smooth, level ground.”
Harmon’s impressed with his 2001 Deere 790 compact tractor equipped with a front-end loader and 72-in. finish mower. “It’s an excellent performer in every way and has been trouble-free. This is my first small tractor. I expected it to work good since I’ve been using big Deere equipment for 40 years with great success.”
On the “worst buy” side, he lists a pair of 2002 Cadillac Seville SLS cars. “They’re the worst cars I’ve ever owned. The engines knocked so badly I had to replace the pistons. The wipers quit working, the bearings on the steering shaft went bad, and I had to replace the steering rack assembly, heaters in the seats, and window motors. The power seats and power tilt steering wheel also quit working.”
Jackson’s the satisfied owner of a 2001 Deere 790 compact tractor equipped with a Great Bend 260 front-end loader that has a quick attach bucket and forks. “This tractor has about 40 trouble-free hours on it and is the perfect size for my 2 1/2 acres. My only wish is that it had rear hydraulic outlets.
“My Harbor Freight 4-in. grinder is my worst buy. I tried to use it to cut some 1-in. dia. steel pipe but it stalled out whenever I applied even moderate pressure. This tool works great for grinding flat surfaces, but not for cutting.”
“My Deere 790 utility tractor is a very powerful and useful tractor and as far as I’m concerned works almost perfect. I use it with a frontend loader and mid-mount finish mower.
“My Sand Welding 6 by 12-ft. dump trailer is a heavy duty trailer that outperforms anything else I’ve ever seen (Sand Welding, Inc., Albany, Minn.). It has a capacity of 12,000 lbs.”
John Deere 4
8 Best Buys0 Worst Buys“This little workhorse will do most any job we ask it to do,” says Stewart, pleased with his Deere 4 by 6 diesel Gator utility vehicle. “It has required only routine maintenance. Works great for feeding round bales. A tank of fuel will last us for days.”
“I really like my 2000 Deere 4 by 2 Gator which I bought used. It works great for repairing fences, checking on livestock, and doing branding work.
“I’m disappointed with Liquid Nails. The company offers silicone and adhesive-type products and I’ve used both of them, but they perform poorly. These products are hard to work to a good finished surface, so don’t expect them to look good on your projects.”
“I like my 2000 Deere 4 by 6 Gator. My grandson and I use it to rake hay and to spread seed and harrow it in afterward. We also use it to mend fences and to haul wood and hay in 4-WD. It’ll go almost anywhere.”
Tom’s happy with his 2000 Deere 4 by 2 Gator. “My wife and son bought our Gator over my objections. Boy, was I wrong. We all love it. We use it for everything - feeding livestock, fencing work, checking cattle and hogs, and so on. All of us, including our sheep dog Duke, love taking it on Sunday afternoon rides.”
“My 2001 Deere 4 by 2 Gator is a real work saver. I use it to haul seed, chemicals, garden supplies, plants and firewood. My wife uses it almost as much as I do. It has been trouble-free. We bought the machine equipped with an optional dump bed which makes it even more useful.”
“My 1998 Deere 4 by 2 Gator is well made, dependable, always starts and has required only routine maintenance. The only improvement I’d like to see is a backup light. I’ve put 1,200 hours on our Gator with no problems at all.”
“My 1997 Deere 4 by 2 Gator is my best buy. No expenses so far except for oil and oil filters. It’ll go anywhere. The dump box is very handy.”
“We’ve used our Deere 4 by 2 Gator about a year now and really like its maneuverability and ease of handling. It’s easy on fuel, can carry a nice load, and has a lot of power for a vehicle of this type.”
John Deere 4320 compact tractor
6 Best Buys2 Worst Buys“One of my best buys was a 2007 Deere 4320 compact PowrReverser tractor. I tuned it to 72 hp; it had 48 hp eight years ago. It’s got over 3,000 hard hours, and I’ve never replaced anything other than a water pump and the usual front wheel seals. I just got a Deere Z994R 60-in. cut diesel zero-turn. I love that thing.”
On the worst buy side is a 2024 DeWalt cordless weed trimmer. “I bought it a year ago, and the head kept discharging all the string. I couldn’t figure out the problem, so I bought a new head. After a couple of uses, I had the same problem. There doesn’t seem to be a solution to this issue. There’s just too much plastic from China.”
He bought a used 2005 Deere 4320 tractor equipped with a Bush Hog loader, with 185 hrs. on it. It now has about 600 hrs. “The tractor itself works great, but the loader had problems. I had to rebuild the hydraulic cylinders twice, and it looks like I’ll have to again. The Bush Hog dealer has no answers. A new cylinder from Bush Hog costs several hundred dollars, and I’m not sure I want to take another chance on buying one.”
“I bought a new Deere 4320 tractor in 2006 and used it to cut 2 1/2 acres of pasture and to till a 100 by 200-ft. garden. Once a year I also use this tractor in a local parade to pull a farm trailer made into a Christmas float with about 30 children on it.
“Last year on the way to the parade the tractor broke down about 2 blocks from home. I called our local Deere dealer where I bought it new for $32,096 cash. They picked it up and took it into town (2 miles for $125) and found out it had a bad fuel injector pump and camshaft. It cost $1,200 to tear the tractor down, and they wanted another $7,800 to fix it. They said they don’t make this engine any more.
“The tractor has only 180 engine hours on it so it isn’t even broke in, yet the warranty has expired. I’m 74 years old and on Social Security so I can’t afford to fix it. I thought I had spent my retirement money wisely to get a new tractor so I wouldn’t need another one in my lifetime.”
“My 2006 Deere 4710 48-hp tractor is the perfect size for my needs. I actually bought this tractor in 2008 with 123 hours on it. It had been loaned by Deere to the Kansas City Chiefs as a field tractor, and then sold to a local dealer here in Maine. This tractor works well in confined wooded areas. It’s low to the ground and is equipped with turf tires which provide excellent traction. No problems. I also own another 4710 model that I bought in 2005. Both tractors are powered by excellent Yanmar 4-cyl. diesel engines that run smooth and quiet.”
On the negative side, “My 2007 Deere 4320 tractor was noisy and leaked diesel fuel. Sometimes the turbocharger caused the tractor to accelerate by surprise and if I hit a bump loads of firewood would spill out. I traded it in favor of the 4710.”
“Our 1971 Deere 4320 tractor has almost 9,400 hours but still works great. We use it to pull 50 ft. of harrows in the spring, a job that it handles with ease. It’s also easy on fuel. This tractor was rolled once but we straightened out the cab and it has worked fine ever since. It’s the best tractor on our farm.”
A 1972 Deere 4320 tractor rates as Leo’s “best buy.” “I bought this tractor used in 1976 with 1,200 hours on it and used it for 28 years to pull a 21-ft. cultivator and 21 ft. of press drills hooked together. I also use it during the winter to feed my cows. Over the years I put two clutches in it. Now it has more than 14,000 hours on it but still runs perfect.”
“My best buy is my 1972 Deere 4320 tractor which I bought used in 1976. It still starts right up just like a Buick. In all the years I’ve had it I’ve never had to take the engine apart. I always keep the tractor in the shed whenever I’m not using it, and I always change the oil twice a year. Every oil change requires about 5 gallons of new oil. It uses a large, high priced, spin-on oil filter that’s three times as big as the filter used in the company’s 4020 tractor. I use the tractor to pull a field cultivator, grain drill, and 5-bottom moldboard plow.” “Here’s how I pull steel fenceposts. It consists of a 6 by 6-in. piece of 3/4-in. thick steel plate attached to approximately 2 ft. of chain with a hook on the end,” says Joe Eliker, New Madison, Ohio.
“The plate has a 2-in. wide slot in it that fits any T-post. You hook the chain up to a 3-pt. hitch or loader bucket. If you hook up close to the ground you can pull any post.”
Contact: FARM SHOW Followup, Joe Eliker, 408 E. Wayne, New Madison, Ohio 45346 (ph 937 996-1501). fax 515 622-3207; E-mail:
Jerald Campbell, Pierson, Iowa: “Our best buy is our 1988 Artsway 500 grindermixer. We use itto grind and mix more than 75 tons of feed per month, Our only expense has been to replace a chain and repair the scale. “Most of the time we use our Deere 4320 tractor to power the grinder. It’s also a best buy.”
John Deere 4555 tractor equipped
8 Best Buys0 Worst BuysGerald Williams, Duncombe, lowa: Gerald bought u used 1982 Honda 200 3wheel ATV two years ago and says t's his “best buy”. “It’s handy for riding out to the fields and can straddle 30-in. rows when the crops are small. “Pm well pleased with my 1990 Deere 4555 tractor. It has a lot of power and is easy on fuel.”
Gerald Williams, Duncombe, lowa: Gerald bought u used 1982 Honda 200 3wheel ATV two years ago and says t's his “best buy”. “Its handy for riding out to the fields and can straddle 30-in. rows when the crops are small. “Pm well pleased with my 1990 Deere 4555 tractor. It has a lot of power and is easy on fuel.”
Bertram Willett, Paducah, Kent.: “It does a good job and is fuel efficient,” says Bertram about his “best buy” 1991 Deere 4555 tractor equipped with a powershift transmission. Bertram installed his “best buy” AcuGrain weight scale on the unloading auger on his Deere combine (Acu-Grain, Great Falls, Mont. 59401 ph 406 761-1781). “When properly calculated it does a perfect job of measuring yields. We rent land in 35 different places in addition to our own farm, So it saves a lot of time and fuel because we don’t have to haul partial loads back to check yields.”
Larry Gregerson, Herman, Neb.: “My Deere 4555 tractor is fuel efficient and hasn't had any problems. “My Deere 9500 combine is easy to adjust and service. Capacity is excellent. “My 1992 Ford F-250 4-WD pickup, equipped with a 7.3-liter diesel engine and 5-speed transmission, is a best buy. Drives comfortably, has plenty of power, and the soft ride suspension option gives it a better ride than the 1988 F-250 I had been using.”
Albers Farm Inc., Chapman, Kan.: “Our best buy Deere 4555 tractor has good torque at low rpm’s, It starts right up in 30 degree weather. We use it to pull a Deere 630 28-ft. disk which we also like very well.
Robert Schultz, Columbus, Kan.: Robert's “best buy” is a 1989 Deere 4555 tractor equipped with mechanical front wheel drive and power shift transmission. “It's hard to believe that they could improve this tractor, although I did have a few minor problems with it after 1,700 hours which have been resolved. A good product and good service make for a healthy relationship.”
James Britt, South Fulton, Tenn,; “It's a pleasure to drive and has impressive fuel economy and power, The 5-year/5 ,000-hour warranty helps make it a best buy,” says James, pleased owner of a 1990 Deere 4555 tractorequipped with 18.4 by 42 radial tires.
Kenneth Mersch, Eagle Grove, Iowa: Kenneth likes his 1990 Deere 4555 tractor equipped with mechanical front wheel drive, “T used it to pull a Deere 960 field cultivator this spring and apply herbicides without the use of dual tires. My sprayer is equipped with a hydraulic pump that makes it easy to attach to tractor which has a radar acre and speed monitor.”
John Deere 7400 row crop tractor
8 Best Buys0 Worst Buys“My 1994 Deere 7400 row crop tractor has about 9,000 hours on it but still has the original engine and transmission. I use it with a planter and cultivator, and it has also harvested hundreds of acres of onions. It’s definitely my best buy.”
“The more I use it, the more I like it,” says Donald about his new Deere 7400 equipped with MFWD. “It has plenty of power. I really like the Power Quad transmission. The cab is exceptionally quiet. In my book, this tractor could become as popular as the 4020.”
Larry likes his 1995 Deere 7400 tractor and 1997Deere 7810 MFWD tractor. “Both tractors have convenient controls and good engines and 3-pt. hitch controls.” On the “worst buy” side, he lists his 1995 Ford F-150 2-WD pickup equipped with a 300 cu. in. 6-cyl. engine and 5-speed transmission. “We’ve owned many Ford pickups over the years and liked them. The problem with this one is that it has a new-design clutch slave cylinder - we’ve had to replace it twice in only 40,000 miles. Now it’s not working again but the company won’t do anything about it. They say the problem is due to our dusty conditions. It was a bad design change on a part that had worked well for many years.”
John’s the satisfied owner of a 1995 Ford New Holland 8340 front wheel assist tractor equipped with a 456 cu. in. turbocharged diesel engine and SLE cab. “We traded in two tractors for it, hoping that it would do the work of both, and it met all our expectations. The 115 hp turbocharged diesel engine has a lot of power and can handle our 6-bottom moldboard plow and 24-ft. ‘S’-tine field cultivator with ease. Even with front wheel assist the tractor can turn short. When we’re spraying or planting we operate the engine at about 1,600 rpm’s and use just under two gallons of diesel per hour. The cab is quiet and comfortable and has good lighting for spraying at night. We had a few minor problems with the tractor which the dealer took care of under warranty. I priced Deere 7400 and Case-IH 5250 tractors before I bought it and found that the New Holland model cost considerably less money.”
Richard’s the satisfied owner of a 1995 Deere 7400 tractor equipped with a 740 self-leveling loader. “I like how it handles. It’s easy to start in cold weather and the cab has great visibility. All of the loader operations can be handled with one control lever.”
Don Horne, Jr., Doerun, Ga.: Don's the owner of a 1995 Deere 7400 front wheel assist tractor, “It handles well and is a pleasure to drive. It has a great transmission and a roomy, comfortable cab that’s easy to enter. It also has a lot of power for its 100 hp rating.”
Allen W. Cohrs, Donna, Texas: Allen’s impressed with his 1994 Deere 7400 MFWD tractor. “It has all-new 3-pt. hitch “Every day we wonder what will happen next.” controls that work great for digging ditches where constant readjustment is necessary. The dual lift cylinders can lift big implements with ease. It also has great power and traction in muddy conditions. “My worst buy is my 1993 Berthroid blower sprayer equipped with a hydraulically-adjusted canon head, It kept breaking down constantly for 1/2 years so T traded it toward the purchase of another implement, If this is an example of foreign-made equipment, I feel sorry for foreign farmers. I used the sprayer to treat the edges of my cotton fields, but it broke down at least every 4 or 5 hours. Almost every part of the sprayer had to be welded or braced. The fiberglass canon on top had to be replaced because it had cracks in it. All of the metal below the pump had to be replaced because it was too thin. The metric pto shaft broke three times. We finally replaced it with a standard pto shaft that cost $350, This machine cost $7,800, but it wasn’t worth $500." Albert Escamilla, Il, Normangee, Texas: Albert likes his 1993 Polaris 350 6WD, 6-wheel ATV equipped with a dump bed. “It’s an excellent product, own only 12 acres, but I use it every day. It has more power and traction than I normally need. have over 500 trouble-free miles on it.”
Bill Critchfield, Osceola, Mo.: “Our 1994 Deere 7400 MFWD tractor is a best buy. The power quad transmission shifts smooth, and the engine runs quiet and has plenty of torque and power for a 100 hp tractor. “My 1976 Deere 4430 tractor has performed well with only a few minor problems with the air conditioner. “My all-time worst buy is my 1990 Suzuki 4-WD 4-wheel ATV. The engine has had continuous problems, especially with the carburetor, which keeps flooding, The dealer wouldn't pay for repairs even though it was under warranty, and the company wouldn't help, either.”
John Deere Gator 4
8 Best Buys0 Worst Buys“We use our Deere Gator 4 by 2 utility vehicle every day on our farm. It has more than 3,100 hours on it.”
“My 2003 Hummer is an excellent truck, but dealer service has been worse than poor. I wrote a certified letter to the general manager but never got a response. Three trips of 300 miles each to the dealer did no good so I made my own repair and sent the dealer the bill with a threat that I’d publish the story if they didn’t pay for my expenses. They did. The stainless steel exhaust system leaks at the welds. The wiring for the reverse setting on the video camera burned out due to improper installation. Other things got warrantied only after threats by my attorney.
“I use my Deere Gator 4 by 6 every day on our farm and kennel. It’s a great machine, but Deere won’t recognize the engine warranty. It’s a very extensive warranty that’s twice as long as the Deere warranty. However, the engine has been tuned up three times and I’ve always had to pay for parts and labor, even after I pointed out the problems were clearly covered by the warranty.”
Mary says her Deere Gator 4 by 6 utility vehicle is her “best buy”. “Ever since it arrived at our house, we keep asking ourselves how we ever did without it. As a woman, however, I must insist that it’s not just for guys. It’s second nature for us now to put our equipment and tools in the Gator’s bed and zip off to remote areas on our place. Also, this vehicle is so comfortable to ride in that I often take my 89-year-old mother on rides to see the sights. It handles easily even though it’s a rugged, powerful piece of equipment. Of course, as a woman I accessorize my Gator with a Deere cap appropriate for the season.” By Mark Newhall, Editor & Publisher do for free at sites like
“Last summer we purchased a new Deere Gator 4 by 2 to save wear and tear on our tractors and our pickup. We use it for doing chores and fencing work and for on-farm transportation. It works well for all these jobs.”
“My 1998 Deere Gator 4 by 2 utility vehicle is my best buy. It’s a real work horse. We use it to haul just about anything – vegetables from our garden, dirt, etc. Our dog loves to ride in it. It’s easy to get around the farm, easy to handle, and economical to operate. We wish we would’ve bought it years ago.”
Two of Debbie’s “best buys” are her 1990 Case-International 685 tractor and her 1998 Deere Gator 4 by 2. “The tractor is really easy on fuel and is handy for cutting hay and raking. The Gator is a handy tool for odd jobs around the farm. The automatic dump is especially helpful.”
On the “worst buy” side is a 56 by 104-ft. Walters building. “The building itself is generally good but the warranty is terrible. We’ve been trying to get wind damage fixed that occurred under warranty fixed. All we get are empty promises and missed appointments.”
Jimmy nominates his 1995 Deere Gator 4 by 2 as his best buy. “I‘m well satisfied with it. I bought my wife one this year because she was always using mine.”
“My best buy is my 1996 Deere Gator 4 by 2 equipped with a gas engine. This is an absolutely amazing, very efficient and, so far, completely dependable piece of equipment. My wife and I have a small cattle operation in the Blacklands of Texas, and during the rainy season the Gator will float over the black, sticky mud without making deep ruts. I use the Gator for all cattle management tasks including daily inspection, feeding, roundup, and fence repair. I don’t even own a horse. My wife loves it for making her daily runs with her dogs. No problems.”
John Deere 1219 sicklebar-type mower-conditioner
5 Best Buys2 Worst Buys“My best buy is my Deere 2555 MFWD tractor equipped with a Deere 245 front-end loader. It has about 5,000 hours on it. I’ve replaced the water pump and tachometer but otherwise it has been trouble-free. I use it primarily for loader work but I haven’t had to replace the clutch yet.
“My Deere 1360 rotary mower/conditioner, which I bought used, cuts hay in all conditions, wet or dry, tall or short, and at speeds up to 14 mph.”
On the negative side, Henry says his Deere 1219 sicklebar-type mower-conditioner, which he bought new, caused him “nothing but trouble”. “In heavy hay the reel wouldn’t turn. Instead, hay would wrap around the reel belt causing it to slip no matter how much tension was on the belt. In wet conditions, such as second cut clover, the knife would plug up constantly. I couldn’t go more than 4 1/2 mph in the field and usually spent more time going backward – in order to clear the knives - than going forward. I traded it in for a used Deere 1360 rotary mower-conditioner and it’s a best buy. I’ll never go back to a sicklebar mower again.
“My Breeze windmill is a worst buy. I wanted to use it to aerate my pond to improve the water quality for cattle and fish. Unfortunately, vibration caused the tail section to break off which allowed the blades to hit the mounting pole. The machine was still under warranty so I returned it to the manufacturer. However, instead of replacing the blades all they did was cut the damaged sections from the ends of the blades. This reduced the performance as it required higher wind speeds before it would turn. The bearing on the crankshaft is too light and will only last about four to six months before it has to be replaced. Now the machine has developed an air leak and won’t build pressure. I’ve replaced every bearing and seal on the machine and rebuilt the pump, yet I still can’t seem to get it to work properly. This machine has been nothing but a big waste of money and time.”
Don’s pleased with his Deere 1219 mower-conditioner. “It does a good job. Excellent overall performance in a variety of forage crops and under some diverse and difficult conditions. “My 1993 Dodge Ram 250 pickup equipped with a V-8 engine and 5-speed manual transmission is my worst buy. It has weak springs at the front and rear and can haul only a half ton of feed. The rear end ratio is so high that I can’t even use it to pull my 16-ft. stock trailer. The dealer said he could correct these problems ‘at my expense’. What I wanted was a farm work truck - what I got is a toy that’s capable of an 85 mph highway speed while carrying two fishing poles and a small can of worms. I’ll probably buy another Dodge, but I’ll buy from a dealer who knows farm trucks.”
Chuck’s happy with his 1993 Deere 1219 mower-conditioner. “It runs quiet and is designed so that it’s easy to adjust the skids and swath width. Very little maintenance is required.” On the minus side, “My 1993 Parmiter SR52 silage bale wrapper for big square or round bales is my worst buy. The quality of the bale silage it produces is excellent. It’s made in England and my machine is only one of two in the U.S., so before I bought it I asked about parts availability. I was told there were enough parts in Normal, Illinois, to build two machines. “It took a year to get the operator’s manual and parts book. I had trouble with the computer and they sent me a new one that was completely dead. An ‘O’ ring blew almost immediately after I got the machine. I ordered an ‘O’ ring kit from the company but I didn’t get it until almost three years later. When the gearbox split I ordered a shaft and double roller chain out of the parts book. However, both the shaft and chain were too long. I never know when something is going to break or where I’ll get parts.”
A 1994 Deere 1219 mower heads Charles’s “best buy” list. “I traded in my 18-year-old Deere 1209 model which worked great. To my surprise the new model has a non-clog cutterbar which has never plugged. It’s a real joy to operate and is a great machine.”
Ray Fiedler, St. Joseph, Minn.: Ray's impressed with his 1993 Ford 8630 2-WD tractor. “I really like the powershift transmission, foot throttle, and cab. It has doors on both sides. “My 1992 Case-IH 600 silage blower runs smooth and has a lot of capacity. use it with a 100 plus hp tractor.” On the negative side, Ray lists his Deere 1219 mower conditioner. “I bought it in the fall of 1992 when I traded in an 8-year-old New Holland 489 haybine and used it for the first time in 1993. didn’t like the way itcut - hay plugged up at the sickle guards.”
Merle Doerscher, Davenport, Iowa: “My 1992 Deere 1219 haybine is my best buy. Before I bought it looked at every haybine made in the U.S., and this is by far the best one on the market.”
Eldon Rumppe, Cashton, Wis.: “My John Deere 1219 mower/ conditioner with non-clog guards is one of the best mower/conditioners I've ever owned. I can mow anywhere 1 want to without plugging. Great for finishing up a strip with just a foot left to cut. No plugging at operating speeds.”
John Deere 250 wheel loader
4 Best Buys3 Worst BuysZachary nominates his 2021 Kubota SVL75-2 skid loader with an enclosed cab as a best buy. “It’s been very reliable. With the tracks, we can do almost anything.”
Zachary isn’t pleased with his 2005 Deere 250 wheel loader. “We were constantly replacing hoses, and the controls were fatiguing. The lights gave us no end of trouble.”
“Our ‘best buy’ is a Deere 250 skid steer loader purchased new in 2001. It is still being used on our 180-acre farm with over 15,000 hrs. on the meter. We have never done anything to the engine. It doesn’t need any engine oil added from one oil change to the next. I still love to use the machine.”
“I bought a new Deere 250 skid steer in 2000. It came equipped with Galaxy tires and after 21 years of almost daily use, these tires still have at least a couple of years left on them.”
“It has been a dependable machine so far,” says Parker about his 1999 Deere 250 skid loader. “This model doesn’t have the best reputation, but my dealer thoroughly serviced it before I bought it. I use it with Loegering steel tracks during the summer and tire chains during the winter, which allows it to perform all the loader work on my 200-acre farm and woodlot. I use a number of attachments with it, which makes my life easier every day.
“My worst buy is the pellet stove I bought from U.S. Stove Co. When it works this furnace does a good job of heating my large old house, but it seems to go out often for no apparent reason. Then I restart the fire and away it goes – but only for a while.” Harbor Freight cargo nets that I bought for my Chevy S-10 pickup and my 6 by 8 by 2 trailer are best buys. The nets with wire hooks work better than the ones with big, flat plastic hooks. As a volunteer I haul large loads of food for food pantries, bags of used clothes for shelters, and cab-high loads of flattened cardboard for recycling. The net stretches over the most irregular loads and keeps everything intact.
“A lot of my friends think Poulan chainsaws are junk, but I use only Poulan Wild Thing saws and really like them. I buy the saws used at auctions and garage sales and throw them away if they cause trouble. They all use the same chains and sprockets so I can interchange parts. The company’s toll-free phone number for parts is printed right on the saw and has been helpful. I always get good service. I currently own five of these saws.”
A 2002 Chevrolet Avalanche rates as Richard’s “best buy”. “It has about 140,000 miles on it and only the brakes and tires have been repaired or replaced. I can drive to the field or church in comfort.
“My Deere 250 skid loader is my worst buy. It has had hydraulic hoses and pump problems with fewer than 500 hours. The engine and other components work fine but the hydraulic problems are costly.”
“My 2001 Deere 250 skid steer loader is my worst buy. It has less than 600 hours on it, but already I’ve had to replace five hydraulic hoses inside the machine. The engine was setting on two of the hoses which caused them to blow. The other three hoses were run poorly so they kinked and leaked. There was a factory recall on two items, and I had to wait four months for the dealer to repair them. The dealer and the company did nothing to help, even after three months of phone calls. They left me with 6,000 lbs. of yellow scrap metal. No more Deere products for me.”
“We like our 2001 Deere 250 skid loader. Everything on it is handy. It’s rated to lift 1,700 lbs. but will easily pick up 2,800 lbs. The company did a good job engineering and building this machine.”
John Deere 2555 tractor equipped
7 Best Buys0 Worst Buys“I think my 1992 Deere 2555 is the best tractor the company ever made. I use it to pull an 8-ft. offset disk on heavy clay soil. It’s a fuel efficient tractor. I ran the disk 6 in. deep and covered four acres in one hour, yet I used only 2 1/2 gal. of fuel. “I also like my Deere 5400 tractor equipped with a shuttleshift traansmission. It has a quiet engine with a lot of power, and it turns short. “My Deere 435 round baler never lets me down. I use it in my custom baling business. “My 1995 Dodge 4-WD truck equipped with a diesel engine, automatic transmission, and super cab is a best buy. It’s fuel efficient and has a differential with a 3.5:1 ratio. On one trip I went 55 mph and averaged 46 mpg. Even when I used it to pull my 26 1/2-ft. recreational vehicle, I got more than 20 mpg. It’s the best truck I’ve ever owned.”
David Luscomb, Clear Lake, Iowa: “It has great power and fuel economy for a 65 hp tractor,” says David about his 1991 Deere 2555. “Handles my grinder-mixer just as well as my Deere 4240.”
Fred Dunlop, Stayner, Ont.: Fred's the pleased owner of a Deere 2555 tractor equipped with a cab and front wheel assist. “It’s a beautiful tractor to drive except that the 18.4 by 30 rear Firestone tires are 1/2 in, out of round. It causes a rough ride on the highway when the tires are cold.”
Clyde Steinman, Bristow, Okla.: A 1991 Deere 2555 tractor equipped with a cab, air conditioning, and a front-end loader heads Clyde's “best buy” list. “It has plenty of power for its size and the cab is super quiet and dust-free. No problems at all.”
Tom Wall, Iowa City, Iowa: Tom is disappointed with his Acu-Grain GMS 3 yield monitor. “I bought it for the 1989 harvest, but when it arrived the wires were unglued from the harness. It couldn't read the volume of grain consistently with readings varying plus or minus 10%. I was in conee <<a rst Buys VIOUS Page) slant contact with the company to try to solve the problem. After two weeks of fighting to get itto work right, gave up and sent it back. I then lost 20% of my refund fora “restocking charge”. If you wantto measure your yields, buy a scale.” Tom likes his Deere 2555 tractorequipped with mechanical front wheel drive and a 245 front-end loader. “I can't believe what this tractor can do. It works great on soft ground for loading round bales or manure, and it walks away with a 550 bu. wagon load of corn. It has good power and a short turning radius.”
Fred Dunlop, Stayner, Ontario: “It has more power and is easier on fuel than the 2550 model it replaced,” says Fred about his Deere 2555 tractor equipped with a cab and mechanical front wheel drive.
John Sonneveld, Welland, Ontario: A 1988 Deere 2555 tractor equipped with mechanical front wheel drive is John’s “best buy”. “It’s an excellent utility tractor. The hydraulics are very powerful and quick, It has more than enough power and turns shorter than any other tractor I’ve driven, I wouldn't trade it for anything.”
John Deere 2750 utility tractor
6 Best Buys1 Worst Buy“I bought a used Deere 2750 utility tractor with a Deere 240 loader about 30 years ago. It has scooped up thousands of loads of manure over the years and done many more chores around my place. The loader is self-leveling, which is nice for big loads of manure. The hour meter shows 8,600 hrs. and all I’ve had to do over the years is replace the clutch, and diesel injector pump, and do a couple other small repairs. Very pleased with how it has performed.
“About 8 years ago, I purchased a used Ford New Holland 4030 utility tractor with a loader. It’s a good tractor, but when I started using it like my old 2750, the loader brackets broke and had to be reinforced. However, it’s built low to the ground and easy to get up on, which is nice when you’re getting on and off several times a day.”
“In 1995 I bought a used Deere 2750 tractor equipped with a 75 hp engine that had 3,700 hours on it. Over the years I’ve had nothing but problems with this tractor. Little things like the ignition not working after shutting off the engine, and the alternator not charging after starting the engine.
“The worst problem occurred at 6,553 hours when the transmission oil seal went out and had to be replaced. Oil was leaking on the ground. About 1,400 hours later the same problem happened again, and this time I had the tractor repaired at a different shop. That was last August. Last March - about 63 hours later - the seal went out again. Three repair jobs cost me a total of about $12,000. As a result, I traded the tractor off on a newer Deere 6400 model.”
Jim Haines, Bremen, Ind.: Jim says the best piece of equipment he’s purchased in 40 years of farming is his 1989 Toyota 4-WD pickup. “I’ve put 90,000 miles on this pickup, most of them on our farm or on “It won't start when it gets below 40°, even if we use ether.” our hunting preserve, and all we've ever done to it is replaced the front brakes and kept it lubed. “My worst buy is my Deere 2750 tractor. It won't start when it gets below 40 degrees, even if we use ether. All I can do is hope for the best and expect the worst.”
Rock Francis, Greeley, Colo.: “Green just keeps saving me green,” says Rock about his best buy, a Deere 2750 tractor equipped with MFWD he bought new in 1983. “I’ve done everything with it haying, plowing, discing with a 14-ft. disc, mowing hay. It does it all.”
Peter Steranko, Stenen, Sask.: “My 1981 Massey-Ferguson 4840 4-WD tractor has 5,000 trouble-free hours. “T'm well satisfied with my 1985 Deere 2750 MFWD tractor. It has a lot of power and traction and is easy to maneuver in corrals. It’s also fuel efficient. I use it with my 245 quick-tach loader which comes off easily and quickly. I also like the self-leveling quick-tach bucket and the bale fork, I don't think they could do much to improve this loader. have 9,000 hours on the tractor and loader and they've both performed great.” Gary Eichhorn, Parkersburg, W. Va.: “My best buy is my 1992 Roof VP-75 self-propelled lawn mower equipped with a 30-in, deck and a 26-in. semi-open deck (Roof Equipment Mfg. Co., 11660 Sterling Ave., Riverside, Calif, 92503), The 30-in. deck has caster wheels on front and will mow 2-ft, tall grass without plugging up. I also use it to cut light brush on rough terrain. The caster wheels allow me to turn on a dime using only one hand, The semi-open deck will cut brush over 6 ft. tall and up to in. thick. [use it in the fall when the brush is beginning to die. “It has 26-in. drive wheels so it has enough clearance to go through or over almost anything including ditches, ruts, groundhog holes, small stumps, rocks, and 7 to 8-in. dia, logs. The 8 hp engine has plenty of power, and the round deck lets me cut up to 12 in. tall grass and blow the clippings onto uncut grass without plugging up. The only time ever stall the engine by cutting this way is when the clippings are about 8 in. deep and have the consistency of mud.”
Louis Klusinske, Wild Rose, Wis.: Louis is well satisfied with his 1987 Deere 2750 tractor. “It's fuel efficient and has been trouble-free except for a leak in the power steering system, My dealer fixed it immediately.”
David Livesay, Porter, Okla.: “My Westfield drill fill works like it’s supposed to and is a great labor saver. I wouldn't do without it if it cost twice what I paid. “My 1983 Deere 2750 tractor is a pleasure to drive, but the first 1,800 hours were very expensive. I had to spend about $1,800 on repairs. There were a lot of electrical problems that took the company several “It's a great labor saver. I wouldn't do without it if it cost twice what I paid.” years to correct. The crankcase filled with water. We thought that the problem was a head gasket so we pulled the head in our shop and found a hole in one sleeve. The tractor was built during the strike at Deere. We never did get any help from the company. One block man even told me that we shouldn't have pulled the head ourselves. It shouldn't have made any difference because the problem was with the factory work, not ours. We've put another 1,800 hours on the tractor with no problems.”
John Deere 3010 diesel tractor
7 Best Buys0 Worst Buys“I bought a used Deere 3010 diesel tractor years ago. I have done an overhaul once since I’ve had it, but it has been a convenient tractor to use with great fuel economy.
“I also bought a Country Clipper zero- turn lawn mower probably about 5 years ago, and have had no problems with it.”
“In 1963 my dad bought a new Deere 3010 gas tractor. It had several problems and we finally traded for a new 1966 Deere 2510, which we’re still using today. It’s our best tractor ever.”
“My 1962 Deere 3010 tractor, which I bought used in 2005, was a totally awesome buy. We use it for everything from heavy to light work. We love this old girl.”
Quentin’s happy with his 1963 Deere 3010 and 1967 Deere 4020 tractors, both of which have gas engines. I bought both of them used about 25 years ago and they’ve worked great all these years. The 4020 has about 8,000 hours on it while the 3010 has about 6,000 hours. I certainly recommend Deere products.”
On the minus side, he lists his 1998 Cover-All 30 by 60-ft. hoop building. “In June of 1999 I noticed some holes and deterioration at the southwest corner of the roof. I called the company at least six times and was promised that the problems would be taken care of immediately. However, no one ever called back. I certainly don’t recommend this building to anyone.”
Stuart Oberg, Slayton, Minn.: “My best buy ever is my 1960 Deere 3010 diesel tractor. Everything on it is original except TOP ine CHENG WINCH Mas BONG PIOURT EWO new sets of sleeves and pistons. The last overhaul was in 1975.”
Tom Desjarlais, Oconto, Wis.: Tom’s pleased with his 1989 Chevrolet 3/4-ton 4WD pickup equipped with a 305 cu. in. V8 engine and 5-speed manual transmission, but says it could use one improvement. “It lacks power. The salesman said it would perform as well as my old 350 V-8, but it doesn’t. We pull a lot of loaded wagons so we have to shift gears all the time, which is why my wife doesn’t like to drive it. However, it gets excellent gas mileage and rides comfortably, I like the 4-WD. “My best buy Deere 3010 gas tractor has 12,000 hours and might run forever, It’s been overhauled twice and the transmission and clutch have been repaired once. I keep a loader on it all year and use it every day to feed round bales. “My Deere 4030 tractor has 7,200 hours and my 2440 has 3,500 hours, All my Deere tractors have been good buys.”
Roy Smith, Hampton, Neb.: “My father will not part with his 1962 John Deere 3010 tractor unless he can find another one like it with fewer hours and in excellent condition. It has 9,100 hours, and has been generally very dependable. “I’m also pleased with our Orthman-Hawkins hiller. On our gravity-irrigated farm, we have some sidehills that are gumbo ground where it's hard to get good ridges with a disk hiller. This unit does an excellent job. The Orthman bar and shanks are built strong and the Hawkins hiller units make a uniform ridge without dumping plants under.” Roy’s not happy with his Dura Craft 42 hp. grinder. ‘This grinder has no power. You can bring it to a stop with minimum pressure to the grind stone.”
John Deere 332 diesel lawn tractor
7 Best Buys0 Worst BuysJB likes his Deere 332 diesel lawn tractor with 50-in. deck that he purchased used. “It has 1,300 hrs., uses no oil, and is always ready to mow. The 16-hp. Yanmar diesel will mow rings around an Onan on a Deere 318 with 18 hp.”
“I would like to nominate FARM SHOW as our best buy. The ideas we have gathered over the years have saved us thousands of dollars and we’ve purchased products that we’ve never seen anywhere else. We really look forward to every issue.
“Our other best buy is our Deere 4020 diesel tractor which now has 34,197 hrs. on it. This tractor, which was previously featured in FARM SHOW, and still works every day. It runs like new and still has the original Roosa Master injection pump.
“Our Deere 8400 is also a great tractor with good visibility, plenty of power, and is a pleasure to operate. In more than 12,500 hrs. of operation, we have spent less than $8,000 on repairs.
“Finally, our Deere 332 skid steer is amazing. With 14,632 hrs. of operation, it has had no repairs to the engine. We test a used oil sample every year and it always shows absolutely no engine wear.”
A 20-plus-year-old Deere 332 garden tractor, equipped with a 16 hp Yanmar diesel engine and hydrostatic transmission, rates as Richard’s “best buy”. “I use this tractor for mowing grass and for plowing snow, and over the years it has required only routine maintenance.
“The tractor does have one problem. The steepest part of my front lawn has a 120-ft. run with about 35 ft. of height from the street to the house. When mowing I can drive uphill without a problem. However, whenever I go downhill the transmission starts to freewheel. As a result, I have to drive to the other end of the lawn - which has a much lesser incline – in order to descend. I’ve had three different Deere dealers check out this problem, but they’re all stumped. Otherwise, I really like the tractor.”
Rob likes his Kubota L3830 4-WD loader tractor equipped with a hydrostatic transmission and 4-in-1 bucket. “It has 232 hours on it but still runs like new. The 4-in-1 bucket works great and is a real time-saver. I can do just about anything with it.”
One of his worst buys ever was a Deere 332 riding mower with a 48-in. deck. “This mower never would cut the grass right, and then the engine blew up. I had the engine replaced and that one blew up, too. We finally junked it.”
Two years ago Fred bought a used 1986 Deere 332 garden tractor equipped with a 48-in. deck. He says it’s his “best buy”. “It came with a snow-blower and cab with wheel weights. The owner sold this machine because the belt kept coming off. I replaced the belts and haven’t had any problems since then. It’s powered by a 3-cyl. diesel engine which is much more fuel efficient than a gas engine.”
“My best buys of all time are my 1956 Allis-Chalmers WD45 and 1962 Ford 901 tractors. The Ford model is equipped with a diesel engine. I bought both tractors used and they’ve been very reliable.
“My 1995 Ford F-250 pickup equipped with a Power Stroke diesel engine is a best buy.
“MyDeere 332 lawn tractor equipped with a 50-in. mower has about 600 hours on it and is also a best buy.”
Margaret L. Eggers, Winterset, Iowa: “Our 1993 Deere 332 diesel garden tractor is our best buy, No problems at all, We use it to mow over 3 acres of hilly, rough lawn . We also use it as a chore tractor and pull a small trailer behind it. “Our Sears riding mower is our worst buy. The transmission goes out every other week and the company is slow to repair it.”
John Deere 335 round baler
7 Best Buys0 Worst Buys“My 2010 Vicon 713T rotary rake can handle either a 22-ft. windrow or two 11-ft. windrows. It does the work of three side delivery rakes, and it does it much better.
“My 2000 Deere 335 round baler has performed flawlessly while requiring only routine maintenance.”
Ben’s happy with his 1997 Deere 335 round baler. “I use it to make 400 to 500 bales every year, some of them weighing up to 2,000 lbs. Yet this baler has been virtually trouble-free.”
“My 2000 Deere 335 all-hydraulic riding mower is my best buy. It’s easy to operate and is the most perfect mower I’ve ever operated. I use it to mow six acres every week. After I bought it I parked my Cub Cadet in the garage and it’s still sitting there.”
Mike’s the satisfied owner of a 2000 Deere 335 lawn and garden tractor equipped with a 54-in. deck. “The tractor is powered by a 20 hp Kawasaki engine and handles anything we throw at it. We use it to mow lawns for many local homeowners, churches, and businesses. It always cuts a smooth, even swath and is easy to handle and maintain.”
David nominates his 1996 Hesston 530 round baler as his “worst buy”. “The main drive chain broke and had to be replaced. Sometimes the baler couldn’t keep the bale rolling. It would stop turning, and then I would have to eject it and start over. Neither the dealer nor the service rep could solve the problem. I finally sold it and bought a used Deere 335 baler. It works good.”
“I like my Deere 335 garden tractor equipped with a 48-in. deck. I put more than 600 hours on it last year with no major problems. I like the power steering and hydraulic lift. I also like the cruise control. We used it to mow 13 cemetaries and 123 yards. I think Deere makes the best mowers for this kind of work.
“My worst buy was a Chevrolet S10 pickup equipped with an extended cab and fully loaded. In 7,000 miles it was in the shop seven times for problems with the EGR valve and exhaust sensors. I couldn’t get anyone to fix it so at 7,700 miles I traded it off.
“Our 2000 Dodge Dakota Quad Cab 4-door pickup is a best buy. It’s a lot better truck than the Chevrolet S-10 pickup we owned before. The Dodge has been in the shop only once and that was for a very minor adjustment.”
Kevin D. Sullivan, Carthage, N.Y.: “My 1990 Deere 335 round baler works excellent for making either dry hay or silage bales. It makes tight dense bales and uses much less horsepower than a forage harvester, which I would otherwise have to use to make silage.”
John Deere 4255 tractor
7 Best Buys0 Worst BuysJim nominates his 2011 Deere HPX Gator utility vehicle as his “worst buy”. “The operator’s manual says my Gator has a warning beeper that should come on whenever the parking brake is engaged, but that doesn’t happen. As a result, I had to replace the brakes within the first 2 weeks of use because someone drove the Gator with the parking brake engaged. A company rep said the operator’s manual is in error and refused to install a beeper.
“I’ve had other problems with my Gator, too. For example, I had to replace the gear shifter shaft and the variable drive belt 3 times, and also the steering shaft, CV joints, both front wheel bearings, tie rod bushings, rack and pinion assembly, and starter. I don’t mistreat my equipment, as I own a Deere 4255 tractor with 10,200 hrs. that has required no maintenance other than replacing the seals. I also own a 2004 Ford F-350 truck with about 220,000 miles that has required only routine maintenance. But my Gator, with about 1,600 hrs. on it, has been a constant maintenance headache.”
“I like my 1991 Deere 4255 tractor which is equipped with an air conditioned cab. It’s comfortable to drive and handles good. My only complaint is that the muffler partially blocks the driver’s view.”
“My Westfield electric/hydraulic drill fill auger is well made and an excellent product.
“My 1992 Deere 4255 is a super tractor. Why anyone would want more in a tractor is a mystery to me.
“My 1993 Vermeer 504I round baler is easy to operate and virtually trouble-free. It does an excellent job.”
Oscar D. White, Burlington, Iowa: “My 1993 Deere 4255 tractor has only a few hours, but I'm well pleased with it so far. My only complaint is that it idles at 890 to 920 rpm’s. A linkage adjustment was made, but if anything the problem is worse now. I’ve had several Deere tractors over the years and they’re hard to beat. I’m sure some adjustment can be made.” Ronnie Roe, Junction, Ill; “My 1979 Deere 4640 tractor keeps right on going and still works as good as itdid when it was new. My Deere 4020 tractor has over 6,800 hours and is still going strong.”
E.H. DeVault, Cedar Hill Farms, Spring Hill, Kan.: “Our 1991 Deere 4255 tractor is our best buy. The only maintenance has been for oil changes, filter replacements, and a flat tire.”
Lonnie Hendricks, Roswell, N.M.: Ronnie’s pleased with his 1990 Deere 4255 tractor. “It replaced a Deere 4240 that was also abest buy. However, the 4255 has more power and is more fuel efficient. The big fuel tank helps on long days. The 15-speed transmission is a lot better than the old 8speed transmission.”
Ralph Evanson, Ulen, Minn.: “It’sajoy to drive,” says Ralph about his 1989 Deere 4255 tractor. “It has lots of power, shifts smooth, is easy on fuel, and has a great cab.”
John Deere 445 lawn tractor
7 Best Buys0 Worst Buys“My Deere 445 lawn tractor is 16 years old. It was the last model before the change to power steering. It has wide tires and a liquid-cooled 22-hp. engine. I also have a 60-in. deck, cab and snow blower. It has 1,800 hrs. on it and has been in for one service call, to replace a hydraulic seal. It has been through 3 batteries. Very dependable.
“I’ve put about 1,200 hrs. on my 1995 Deere 445 diesel-powered garden tractor. It has a lot of power and 4-wheel steering, which makes it easy to drive. However, after about 20 years the engine became very hard to start and lost full power. I took the tractor to our local Deere dealer and after about a week I got a call. They said the tractor needed a complete engine rebuild that would cost about $3,500. I said no way, and brought the tractor back home.
“I looked the tractor over and discovered the linkage rod on the fuel shutoff solenoid had come apart. Over time the rod had backed out about an inch and the engine was starving for fuel. I screwed the rod back in place and now the tractor starts and runs fine. It cost me $150 for the dealer to tell me I needed an engine rebuild that wasn’t needed.”
“I haven’t spent more than $200 for repairs on my 1994 Deere 445 riding mower. It’s equipped with a V-twin 2-cyl., fuel-injected engine that always starts. I recently bought a larger Deere riding mower to mow my big 4-acre yard, and keep the 445 as my back-up mower.”
“In 2000 I bought a Deere 445 garden tractor equipped with a 54-in. mower deck and 47-in. snowblower. This is an amazing machine. We’re maintenance fanatics, and it pays because after 13 years and 2,200 hrs. this tractor has been to the dealer just once, to replace an electronic board – due to age it was cracking. I designed and built an abrasion resistant internal liner for the snowblower housing, which makes it a real gravel eater. If anyone is interested I can provide parts and information (ph 406 580-7984; [email protected]).”
Rich likes his 2001 Deere 445 garden tractor. “In my opinion, the Deere name still stands for dependability and resale value. I’ve owned four Deeres over the years and will always be a Deere person. This tractor could use improvements to the power steering system, and the 22 hp fuel-injected Kawasaki engine drinks fuel. Another problem is the spark plug boots rub on the engine compartment panels.”
Wally’s happy with his 1998 Deere 445 all-wheel-steer garden tractor equipped with a 60-in. mower deck. “It’s built with quality and is a highly maneuverable machine. I recently traded it in for a 2002 Deere X485 model. It needed a new engine after I ran it for only about 1 1/2 hours. Now it seems to be running okay. However, the steering on the X485 model could be improved.”
Robert nominates his 1999 Deere 445 riding mower equipped with a 22 hp engine and 54-in. deck as his “best buy”. “I haven’t had a minute of trouble with it. It’s easy to run and maintain. It makes mowing my three-acre lawn an effortless job.”
John Deere 4455 tractor
7 Best Buys0 Worst BuysJule Jacobson, Porter, Minn.: “I bought my 1993 Deere 7800 tractor to replace a 4year-old Deere 4455. It's my best buy. It ( 1} Q.<—FARM SHOW °« 15 Best & Wor ( has much improved visibility and steering, increased litt on the 3-pt, hitch, good hydraulics, more power, and a power quad transmission, It's a great tractor.”
Eric Angus, Kersey LDS Farms, La Salle, Colo.: Eric bought his “best buy” 1991 Ford 8830 front wheel assist tractor to replace a 1989 Deere 4455, “It’s had very few problems and the powershift transmission is the best on the market. It has a lot of power and a comfortable cab. It’s also fuel efficient. I liked it so well I also bought a 1992 Ford 8730 and a 1993 Ford 7740, Both tractors have front wheel assist.” Sam Scarlett, New Market, Tenn.: Sam nominates his 1992 Henke 2309 TMR mixer-wagon as his “best buy”. “I like it because we can mix more long hay with it, The wagon we had before could handle only about 2 Ibs. of hay per cow, but this one can handle 5 or more Ibs. “My Ford F-350 dually diesel pickup is my worst buy. The Firestone tires in front were “out of round’ and my dealer couldn't find out what was wrong. We took it to a private company that found the problem and fixed it. The dealer paid for it.”
Harry N. Boger, Hartline, Wash.: “My 1992 Deere 4455 wactor equipped with a loader has good traction because it's 4-WD and does a lot of fieldwork. It’s easy riding. “My 1986 Allis-Chalmers 8060 tractor is a worst buy. The clutch has had to be replaced four times or about every 200 hours. The dealer paid for the first one, but I had to pay for the other three.”
Glenn Attoe, Wild Rose, Wis.: Glenn likes his 1992 Deere 4455 tractor. “It works well and service has been good. “I’m also well satisfied with my 1991 Deere 2955 tractor.”
Marvin Pfeifer, Madison, Neb.: Marvin's “best buy” is his 1990 Deere 4455 tractor. “It handles well, has a comfortable ride, and good power, It’s also easy to shift and steer.”
Dale Millburg, Waggoner, Ill.: “My worst buy of all time is my 1982 DMC 179 Stir-ator. Whatever could go wrong, went wrong. It would quitalmost every day even with only about 4 ft. of corn in the bin. In 1989 I replaced it with a new Neco Stir-Rite which works great. No down time so far, “My 1991 Deere 4455 tractor works great and is a best buy.”
Jim Kozumplik, Lennon, Mich.: “My worst buy of all time was an International 1086 tractor. It never seemed to have the power it was rated at. After the warranty expired hydraulic lines broke and a valve leaked. I boughta barrel of hydraulic-transmission fluid just to replace the leakage. Gauges went bad and the pto wouldn't stay engaged. It got so that] was almost afraid to Start it wondering what would go wrong today. The final straw was when the bearings, ring, and pinion went out at 1,620 hours. It cost me $3,563. I traded it in for a new Deere 4455 even though my IH dealer is only two miles away. I'll drive 50 miles to stay with Deere. You get what you pay for. The difference is fantastic.”
John Deere 4650 tractor
7 Best Buys0 Worst BuysDerk’s “best buy” is a Deere 4650 tractor with MFWD. “It’s clean-running and we haven’t had to do any work on it whatsoever, other than routine maintenance. It has plenty of power to suit our needs.”
Larry likes everything about his 1985 Deere 4650 except the transmission. “It’s a quad-range transmission and I know why they call them ‘rip shift transmissions’. The two levers are hard to get out of park even when the correct procedure is followed. Unfamiliar drivers have a hard time getting the tractor out of park, thus stalling the engine. The company should offer and install an updated system for these hard-shifting quad ranges. They could also include a swivel seat for better rear visibility. Also, the air filter element is hard to remove because of its location.”
“I’m totally satisfied with my 1987 Deere 4650 tractor. It has a lot of power and is easy on fuel.”
Murray Woods, Linden, Alberta: A 1985 Nissan Kingcab truck equipped with a powershift transmission heads Murray's “best buy” list. “It has over 150,000 miles with only normal maintenance. The only modification made was to install a carburetor kit. It still runs great. “My 1986 Deere 4650 tractor is reliable and hasn't had any problems. It has a quiet cab with a comfortable operator platform.” On the “worst buy” side, “One year ago we bought a new Chrysler mini-van, The van works great but the Goodyear tires on itarea joke. Within 2,500 miles the sidewall blew outon one tire and within 12,000 miles the other three tires wore out, Chrysler said the tires weren't their responsibility and sent me to Goodyear. Goodyear indicated these were ‘cheap’ tires and wouldn’t back them. I'm disappointed that Chrysler and Goodyear would endanger their reputation and the safety of customers by putting such poor tires on a new vehicle.”
Jay Justice, Chetopa, Kan,: Jay says his 1988 Deere 4650 tractor heads his “best buy” list. “Itruns excellent, The power shift transmission provides a wide range of working speeds. “My 1992 Chevrolet 3/4-ton pickup is my worst buy. It’s 2-WD, but is less fuel efficient than the same model with 4-WD, After only one year I’ve had to put a new seal in the transmission, and a rear tire is starting to fall apart after only 19,000 miles.”
Jay Fitzgerald, Newton, Wis.: Jay says his 1986 Deere 4650 tractor “has plenty of power, good fuel economy, and is easy to operate.”
Theodore McKelvey, Hastings, Mich.: Theodore is the pleased owner of a 1990 Deere 4650 tractor. “The mechanical front wheel drive makes a tremendous difference in tilled soil and also lets me go through tough spots with the implementat full depth.”
John Deere 855 utility loader tractor
7 Best Buys0 Worst Buys“I bought my Deere 855 utility loader tractor in 1997 with 87 hrs. on it. I use this tractor with a 60-in. mower deck to cut 2 to 3 acres of grass, and with a front-mounted blade to plow snow off our 500-ft. driveway. I’ve had to replace only the front tires. Now the tractor has about 1,800 hrs. on it.”
Ron’s the satisfied owner of a Deere 855 tractor equipped with a front-end loader. “This little tractor is fast and has a lot of power. It’s easy on fuel, has good traction, handles well, and rides nice.
“The Veritas dowel maker I bought from Lee Valley Tools has performed far beyond my expectations (www.veritastools.com). Once I start using it to make dowels I can hardly stop.”
“My best buy is my 1997 Deere 855 tractor. I use a backhoe, front-end loader, and belly-mounted mower with it to haul firewood almost every day. It has about 2,200 hours on it. Only the water pump has been replaced.
“The propane-powered weed burner I bought at Northern Hydraulics is my worst buy. It was almost impossible to keep lit.”
Michael’s impressed with his 1986 Deere 855 tractor, which he bought used with about 1,200 hours on it. “This tractor works great and never fails to start. It acts like a tractor twice its size.”
“My 1992 Deere 855 compact utility tractor is fuel efficient and easy to operate. I use it with a 72-in. deck and a 70A front-end loader . It turns short so I can operate it in small areas with no problems. I use this tractor in my mowing service and it’s been trouble-free.”
“My Deere 855 compact utility tractor is the perfect size for my tree farm and small acreage. It starts easy in cold weather and is easy on fuel, using less than one gallon per hour. I recently looked at the company’s new 4000 tractor models and don’t see enough improvements on them to justify trading.
“My 1996 DR trimmer mower is my worst buy. In I’ve already had to replace the trimmer head twice. The problem is that it has no grease fittings and the sealed bearings on it aren’t built heavy enough and aren’t designed to keep out dirt. It cost me more than $80 to replace each trimmer head. I expected better quality from a machine that cost more than $800. The machine also does a poor job in quackgrass and constantly plugs up.”
“My 1987Deere 855 tractor handles a 6-ft. mower with ease. It has two hydraulic outlets, a differential lock, power steering, 3-pt. hitch, rear, mid, and front pto, cruise control, and turf tires. We use it to cut five acres a week. Scheduled maintenance is all it needs. It’s a beautiful machine.”
John Deere AMT 600 utility vehicle
7 Best Buys0 Worst Buys“My 1988 Deere AMT 600 utility vehicle is my best buy. It’s almost 20 years old but still works good for hauling deer, moose and firewood.
Roger Kahler, Kahler Kustom Iron, used it a lot on our farm and for hunting. In heavy brush it’ll go anywhere a regular ATV can go. It’ll also easily outclimb a 4-wheeler. The new machine now has about 5,500 trouble-free miles on it and has never let us down. Over the years we’ve had good luck with Polaris ATV’s, too. We bought our first one in 1989.”
“I’m impressed with my Deere AMT 600 utility vehicle which I bought used. It’s one of the company’s earliest models and has a motorcycle front end. This machine has performed beyond my expectations in every way and has required no major repairs. I use it for hauling hay, wood, dirt, manure, rocks, and to tow my log splitter and a small trailer. It goes through mud and climbs hills with no problems. I like that it fits in the back of my pickup.
On the “worst buy” side, he lists Sears Craftsman tools. “They break easily. Here’s what happened to the tools I own. Open end wrenches spread open, rounding off the bolt head. The ends broke off screwdrivers. Sockets split. The end broke off my breaker bar. The pliers are too sloppy to get a good grip. I plan to buy Snap-On tools from now on.”
“My best buy is my Deere AMT 600 which I bought used. I use it every day to check fences and livestock.”
Debbie Replogle, Enon Valley, Penn.: Debbie’ s pleased with her 1987 Deere AMT 600 but says it could use a few improvements. “It has great load capacity for almost any small or medium job, However, the 5wheel design causes itto be tipsy even when the company’s update kit is installed. It should have six wheels for better stability and better steering. The brake system and wheel bearings won't stand up in mud. We’ ve replaced the bearings seven Limes in five years. It should have sealed brakes and bearings, faster speeds, easier throttle control, and much higher clearance for driving over snow and ruts.”
Harry Franklin, Wakefield, Quebec: A 1988 Deere AMT 600 head’s Harry's “best buy” list. “This is the most useful purchase I’ve made ina long time. The 4-ft. long, 4-ft. wide, 10-in. deep box can easily ( i/<_U~ FARM SHOW « 13 Best & Wo: ( carry 1,500 Ibs. or eight square bales of hay and dumps hydraulically, The 8.5 hp electric start Kawasaki engine starts in temperatures down to 30 degrees below zero. I can go in places that could never go with a tractor. Since purchasing it’ vecutdown on the use of my tractor by at least 40%. No problems at all.”
William Bones, Franksville, Wis.: “My Deere AMT 600 is a best buy. L use itto haul calves, flat tires, tools, and odds and ends.” On the “worst buy” side, “I bought a Deere 2640 tractor that had low hours at a sale in 1988. This tractor must have been built by the three stooges. The bottom of the radiator core was full of fine trimmings and solder which caused it to overheat. The power steering wentoutand the relief valves stuck in the steering system, The clutch faile and I had to install a kit to run the hydraulic motors. A hydraulic line to the steering valve broke causing hot oil to leak out. The air cleaner inlet is in a hard-toreach location and the air cleaner element is always full of dirt. When it’s cold I have to use wrenches to adjust the seat for the operator’s height and weight. On the plus side, this tractor is a great starter, fairly economical, and it’s torquey and tough.”
John Guth, Crivitz, Wis.: “My 1989 Deere AMT 600 is a best buy. It puts conventional ATVs on the back burner as far as versatility and safety is concerned.”
John Deere 1070 utility tractor
5 Best Buys1 Worst Buy“I’ve had very few problems with my 1996 Deere 1070 utility tractor which I use with a frontend loader, backhoe and Farm King 6-ft. snowblower. I had to repair a broken tab on the front wheel driveshaft cover and replace the battery cable. The snowblower has performed well with no problems.
“My Cleary pole building is without a doubt the worst buy I ever made. It took the construction crew more than 3 mo. to complete what should have been a 10-day project. It was like watching the Three Stooges in action, and they ended up getting the building so out of square that the roof trusses wouldn’t go on. They had to dismantle what they had done and reset the posts, but the building still ended up out of square.
“The roof has leaked from day one. I had a crew come out every year the building was under warranty to fix the leaks but each year the leaks would start again, often in the same spot. Now I have to go up on the roof every summer and do whatever I can to minimize the leaking.
“When they finished the building I refused to let them put the Cleary sign up on it. I use this building, but I’m careful not to store things where they could get damaged by water. The company no longer operates in my area and I can see why. Live and learn.”
“My Deere 1070 tractor has done everything I’ve asked it to do, and more.
“My Poulan chainsaw equipped with a 14-in. bar is my worst buy. I bought it because I wanted to finish clearing brush in my pasture. I pulled on it several times but couldn’t get it started. When I read the instructions I found there’s a series of events that must happen before the saw will start. So I took it back and bought a Husqvarna.”
“Our best buy is our 1988 Deere AMT 600 ATV. We use it every day to haul everything from hay to visiting relatives on our cattle and llama ranch. We had to replace the vacuum fuel pump with a 12-volt unit. Otherwise our little 5-wheeler has been trouble-free. I added four stake pockets inside the box so we can haul larger loads of brush or unroll fence wire.
“We’re also well pleased with our 2-year-old Deere 1070 (Yanmar) 4-WD utility tractor powered by a diesel engine. It’s small enough that we can use it inside our barn, yet it plows snow better than heavier tractors we’ve owned in the past.”
“In a recent issue I nominated my 1991 Deere 1070 tractor as my best buy. However, it does have one annoying feature. The loader control lever is positioned too close to the driver’s seat and if you have a big butt like me - I’m 6-ft. 1-in. tall and weigh 240 lbs. - and turn around to your left to see what’s going on behind you, you can accidentally hit the lever without knowing it. The next thing you know the loader is down and digging into the ground. The lever should be positioned to the right and front of the operator, next to the hand throttle. “I’ve had to replace the anti-rattle clips three times on my 1986 Ford F-250 pickup which is equipped with a 6.9-liter diesel engine. It has over 83,000 miles on it and has been fairly trouble-free except for a bad paint job on the hood and top of the cab where the paint has completely peeled off. The company won’t pay to have it repainted, even though between 1984 and 1988 my wife and I bought three vehicles from the same dealer at a total cost of more than $45,000.”
Linwood Thompson, Tenants Harbor, Maine: Overall, Linwood’s pleased with his 1981 Deere 1070 35 hp diesel tractor. However, when a crack developed in a power steering hose he found it was expensive to replace. “I bought a replacement hose for $12 at an auto supply store, but it wasn’t metric so I couldn’t use it. ended up having to pay my Deere dealer $53 for the hose which I think is way too much, The hose is only about 1 ft. long. “The tractor starts better in cold weather than any other diesel tractor I’ve ever had. It has a glow plug for starting in cold weather, but I don’t even have to use it unless the temperature drops below 12 to 15 degrees, One problem is that the gap between third and fourth gear is too wide. In third gear it goes 1.9 mph and in fourth gear 3.8 mph, Also, the tractor’s top speed is only 8 to 9 mph. Small, wide turf tires on the tractor reduce speed about 14% compared to conventional tires, but even so it should go faster.”
Linwood R. Thompson, Tenants Harbor, Maine: “The front brakes on my 1986 Ford F-250 4-WD diesel pickup are noisy. I had to replace the ‘anti rattle clips’ three timesin 71,000 miles. Otherwise, this pickup has been mostly trouble-free except for a problem with air getting into the fuel system. I couldn't find what was causing the problem so I disconnected the original fuel tanks and hooked up a 55-gal. drum that I mounted in the bed behind the cab. used it that way for two years. Last summer I reconnected the fuel tanks and haven’t had any trouble since then. “My 1991 Deere 1070 diesel tractor starts better and faster than any other diesel tractor I've ever used. Starts right up whether it’s hot or cold. It’s equipped with wet brakes and a synchromesh transmission. I use it mostly for rototilling and mowing. I'd like the transmission better if there was another gear between third and fourth. Third gear goes 1.8 mph and fourth gear goes 3.4 mph. Also, I wish it had overdrive so I could go 17 or 18 mph on the highway,”
John Deere 111 garden tractor
5 Best Buys1 Worst Buy“I acquired a 1981 Deere 111 garden tractor from my father’s estate. It has always been well maintained and still mows lawns as good as new. I picked up a second Deere 111 as a junker at a garage sale for $30. It had been terribly neglected. I restored it and built a little cargo box on back. It gets a lot of second looks at tractor shows.”
“My 1985 Deere 111 riding mower is my best buy. This mower runs well every time I operate it, and I use it for a lot of different jobs - pushing snow, mowing, spraying, and hauling things around. It still has the original engine. The only repair it needed was to replace the drive belt pulleys.”
“I like my 1985 Stihl 028 AV chain saw. It has had only one spark plug in 14 years but still never fails to start. It’s the best chain saw I’ve ever owned.”
On the minus side, he lists his 1993 Deere 111 riding mower. “It wouldn’t mow evenly and the Briggs & Stratton gas engine kept breaking down. It spent more time in the shop than it did on my lawn. After using it for two years I finally traded it in for an IH Cub Cadet which I really like.”
Mike likes his 1984 Deere 111 garden tractor. “It’s been trouble-free until last year when the 11 hp Briggs & Stratton gas engine started leaking a lot of oil. We replaced the engine with a 12 1/2 hp Briggs & Stratton and haven’t had any problems with it.”
Barry Denison, Metcalfe, Ontario: "My New Idea 483 round baler is a best buy. We've made more than 8,000 bales with it and the only thing we've replaced is a Vbelt on the pickup. For the price we paid it’s a hard baler to beat. “My 1989 Deere 111 riding mower ran great the first year until the warranty expired. Then the engine went bad and the company wouldn't do anything about it. I went through two engines in three years before I traded it off.”
Barry Denison, Metcalfe, Ontario: “My 1977 Massey Ferguson tractoris excellent. It has 5,000 hours of everyday use and the powertrain is 100% original. It's a pleasure to drive, has a lot of power for its size, and is easy on fuel. I'd definitely buy another one, “My Deere 111 riding moweris my worst buy. The first year itran likea Deere, cutting our 1/2-acre lawn every week. However, the second year the engine suddenly seized. Our dealer installed a new short block engine for $800, and the company refused to help pay for the cost. One of the dealer mechanics told me this wasn’t the first time this problem had happened. The next year the same thing happened again. We traded it in for a Roper 18 hp model. We're very satisfied with it after two years of use.”
John Deere 185 garden tractor
6 Best Buys0 Worst Buys“I bought my Deere 185 garden tractor used for $500. It always starts and runs good. I’ve used it to pull 800-lb. loads uphill with no problems.”
“In 1986 I bought a new Deere 185 riding mower. My dad used it, my son used it, and now my grandson uses it. We change the oil twice a year and it receives regular maintenance. It has never needed any major repairs, and it never sits outside.”
He’s impressed with his 1986 Deere 185 riding mower equipped with a 38-in. deck, Kawasaki 17 hp engine, and hydrostatic transmission. “Mowing grass is a job that interferes with other, more fun activities, and I have little patience for working on mowers. So I was willing to pay a premium price for what I hoped was a premium machine that I could haul in my compact pickup. The engine has never missed a beat and still doesn’t use any oil, and the deck is in great shape. The few parts that I’ve needed, such as belts and bearings, are always available from my local dealer. This mower has required only routine maintenance and has outlasted four of my friend’s discount store brands. It’s definitely a best buy.”
Knute Larsen, Strathmore, Alberta: “My 1991 Haybuster 256 balebuster shreds big round bales and puts the shredded material in a windrow for feeding. It can also be used to spread straw over a 25-ft. wide area for bedding. You don’t have to remove the twine because it wraps up on the shredder and can be removed later. “My Deere 185 lawn and garden tractor equipped with a 46-in, mower and power bagger works well for mowing and bagging grass and leaves, but has terrible steering. It’s so hard to turn the steering wheel that by the time I’m done mowing the lawn my arms are sore.”
Will Hathaway Jr., Turin, Iowa: Will's “best buy” is his Deere 185 hydrostatic “T can't find where they cut any corners with this one. It should last many years.” drive lawn mower that's equipped with a 46-in, deck and 17 hp Kalasaki engine with oil filter. “No problems at all.”
Ronald Welch, Lee, Fla.: “It lets me mow my 5-acre yard in record time,” says Ronald, pleased with his 1987 Deere 185 lawn tractor.
John Deere 2510 tractor
5 Best Buys1 Worst BuyA used Case 1294 tractor is Vance’s “best buy”. “It does everything I ask it to do.”
He’s disappointed with a used Deere 2510 tractor. “It has very little hydraulic capacity for the 3-pt. lift – even less than the last Deere that I sold because of poor hydraulics. The dealer has not been able to fix or adjust.”
“My Milwaukee M12 lithium ion cordless drill/driver has plenty of power and is a pleasure to use.
“My 1960’s Deere 2510 tractor still works great. I just wish it had a console.”
David likes his Simplicity D17 garden tractor. “I’ve used Simplicity garden tractors for more than 25 years and they’ve all been excellent machines. The most trouble I’ve had with this one was a worn out belt and blades.
“My Deere 2510 was a bad tractor. Anything that could go wrong with it, did.”
Robert says his “best buy ever” is his 1968 Deere 2510 tractor. “We can depend on this tractor no matter what the conditions. It starts right up even at temperatures down to 40 degrees below zero. One time we even used it as a hoist for a crippled cow. It’s easy to work on and is ready when we need it.”
Leo likes his 1992 Ford-New Holland 650 round baler equipped with a wide pickup and fast net wrapping system and computer controls. “The customer service and free update system has been great. The baler’s trouble-free and consistently makes an even diameter bale of 1,000 to 1,100 lbs.” On the “worst buy” side, “I bought a T83698 short block engine assembly for my Deere 2510 tractor. When I opened the shipping crate all I found was the first page of the installation instructions and six fax sheets about the contents. When I asked for the complete assembly instructions I was refused. I was refused again even after I offered to pay for them. The engine didn’t run right and a $400 tune-up didn’t help. The dealer refused to give me the Deere address. I’ve used Deere tractors ever since 1947 but I guess it’s time to change paint.”
Harold Nold, Oconee, Ill.: “My best buys are my 1975 Deere 4230 tractor, 1968 Deere 2510 tractor, and 1990 Remlinger RTC-600 M-roller tine cultivator. No down time on any of them.”
John Deere 260 riding mower
5 Best Buys1 Worst Buy“I serviced a Deere 260 riding mower for a friend for 28 years. I’ve used it to pull mowers into my shop. I’ve only changed the oil, filters, etc. Now it’s 38 years old and still going strong.
“I’ve serviced or repaired hundreds of Craftsman riders over the years. Sad to say, they were the most often in need of repairs or were junked.”
“It’s an excellent machine. I cut a lot of acres every year with it,” says Valentina, pleased owner of a Deere 260 lawn mower. “In 12 years all I’ve had to do is change the oil and filters and one set of blades.”
“My 1997 Chevrolet pickup has more than 44,000 miles and gets 19 mpg. It’s a best buy.
“My worst buy is my 1998 Deere 260 disc mower. I was able to mow only about 7 acres with it before a small disc shaft broke. The dealer came and got it. He returned it two weeks later with a bill for $1,261.40. I tried to read the warranty and the only thing I could see that I did wrong was that I mowed in the daylight. I’m talking to a lawyer.”
Billy E. Celsor, Hartsville, Tenn.: “My best buy 1992 Deere 260 disc mower cuts like adream. I haven’thad one bitof trouble with it.”
Ron White, Manitou, Manitoba: “My Deere 260 self-leveling loader equipped with a 7-ft. bucket and pallet fork is a best buy. It’s easy to load because I don't have to constantly adjust the bucket angle to prevent material from falling backward while I lift the loader. Makes it safer for loading round bales,”
Robert Wright, Mansfield, Ill: Robert's “best buy” is his 1988 Plymouth Grand Voyager L.E. minivan equipped witha V-6 engine. “This is our second Voyager and both have been trouble-free, The 1986 model went 80,000 miles with no repairs.” On the “worst buy” side, “My 1988 Deere 260 disc mower, made for Deere in France by Kuhn, has thrown rocks through cab windows three times and at the operator's arm twice even with all guards in place. Our dealer can’t solve the problem. The quality of this machine isn’t up to Deere standards. I don’t expect a long life for the operator or the mower.”
John Deere 2955 tractor
6 Best Buys0 Worst Buys“My 1979 Deere 2840 tractor always starts right up and has a lot of power. However, it has a hard brake pedal caused by a lack of vacuum pressure, which I understand is a common complaint with this tractor.
“When I bought my used 1991 Deere 2955 tractor, both the pto and high-low clutch needed repair work so I rebuilt them. The pto now works fine, but the clutch still slips whenever the hydraulic oil is warm.”
“My ‘best buy’ 1991 Deere 2955 tractor is just the right size for my farm. It has the power to handle any job and still has the original clutch. It also handles well.”
A 1985 International 884 tractor rates as his “worst buy”. “I kept it for five years and had to put a new clutch in it every year. Something always seemed to be going wrong on it. I had trouble with the brakes, and the fuel tank leaked. I finally traded it in. No more Internationals for me.”
Phil Propps, Nashville, Ark.: “My 1991 Deere 2955 tractor has plenty of power and is fuel efficient. The cab is roomy and comfortable. It’s a well-constructed tractor.”
Wayne Colson, Caledonia, Miss.: Wayne's happy with his 1990 Deere 2955 tractor. “It handles great, shifts smooth, has great lugging power and a nice cab. It’s trouble-free. “Marketing information from Data Transmission Network is a best buy DTN, Corp., 9110 Dodge Rd., Suite 200, Omaha, Neb. 68114). The equipment has been dependable and the marketing information is al linate suys very up to date. The weather radar picture is handy, too.”
George Mills, Port Byron, N.Y.: “I couldn't be happier with my 1990 Deere 2955 tractor equipped with 4-WD and Sound Gard cab. Operator convenience and comfort are super, and performance and fuel economy are excellent. “My Deere 335 round baler will bale hay or silage of any moisture content. I double the windrows and bale at 5 to 6 mph to save time and leaves. Works great. My only complaint is that the Weasler pto on’the baler is too heavy and awkward to hook up. Deere should reinvent the overriding clutch and put one on this machine. “My Kuhn rotary rake gathers hay into windrows that dry faster than rolled windrows. It can separate and reform wet windrows and do it fast. It’s certainly a great aid to making better quality hay. “My Bestland loader-mounted rock picker (Viel Mfg. Co., P.O. Box 632, Billings, Mont.) works great for digging out big rocks. The tines scoop them up and the dirt falls through. Ican carry and dump the rocks wherever I want. “My Deere 1460 disc mower conditioner cuts and conditions hay as fast as I can drive and has fewer parts thana sicklebar mower. Getting hay on the ground fast is important here because drying time can be very limited. It’s also fast and easy to hook up.”
Niel Hannah, Port Hope, Ontario: "My Deere 2955 tractor equipped with mechanical front wheel drive has more than 350 hours and isa best buy. [thas a great cab and excellent power, fucl cconomy, and traction. Itmakes farming a breeze compared to other makes of tractors I've used." "My Deere 4555 tractor has more than 300 hours and is another best buy."
John Deere 4030 tractor
4 Best Buys2 Worst Buys“Back in the early 1960’s my dad bought a new Deere 530, which was a great tractor. I traded it for a Deere 4030, which turned out to be a worst buy because of problems with the hydraulics.
“I’m still riding my 1928 Harley Davidson motorcycle, which is now worth about six times more than what I paid for it.”
“My Deere 4030 tractor is my best buy. I bought it used about three years ago with 1,288 hours on it. It had been owned by a retired farmer on a small acreage. I use it to operate a feed mill, round bale fork, blower, auger, silage wagon, and for other small jobs. This tractor is trouble-free and is an excellent starter during the winter. It doesn’t have a cab so it’s easy to get on and off. My wife loves it, too.”
“My 2004 Kubota M8200 does everything a tractor is supposed to do.
“My 1986 Deere 4030 tractor is my worst buy. The hydro pump keeps blowing O-rings in the belly of the tractor, and in order to make the repair the tractor has to be broken in half. The fuel filter is located right above the starter, so if it leaks it drips down onto the starter and could cause a fire. I think that’s poor engineering. I’d rather own a four-legged mule than a Deere.”
Neal’s “very satisfied” with his 1973 Deere 4030, but says the company could have improved the tractor in a few ways too. “It needed a better seat for a smoother ride. It needed better lights for night work and turn signals for safety. A sleeve in the engine recently developed a water leak which led to a rebuilt engine but only after many, many hours.”
Neal added a Deere left hand mirror for road work, halogen lights on the right side to eliminate a blind spot, and a horn.
Robert J. Brown, Vineland, N.J.: “Our best buy of all time is a 1950 Ford 8N tractor, My father purchased it new so I grew up with it. I still use it on my farm today. It’s semi-retired but can still put in a day’s work when it has to. I let my Deere 4030 tractor do the heavy work.”
Rod Baker, Leland, Ill.: Rod’s “worst buy” is his 1988 Fuerst 28-ft., 4-section, flexible tine harrow. “It plugs up with corn stalks and leaves piles of them scattered in the field, The hydraulic fold-up is tricky to operate, The only time it works good is on moldboard-plowed fields without any trash on top of the ground. Last spring we traded it in for a McFarland drag. “My 1974 Deere 4030 diesel tractor runs smooth and has plenty of power. In over 6,000 hours, all it has needed is some clutch work and other minor repairs.
John Deere 435 round baler equipped
6 Best Buys0 Worst Buys“I like my 1997 Deere 435 round baler equipped with a net wrap attachment. I bought this baler used in 2007, but it has performed like new. It makes 4-ft. wide bales that I can transport 2 wide on a trailer. I use it to make a 4 by 5-ft. bale and have weighed several bales that average 1,200 lbs. Net wrap reduces spoilage and helps the bales keep their shape for more than 2 seasons. Nothing beats a green baler. I know because I’ve owned red ones and yellow ones in the past, but I went back to green.”
“It produces good, tight bales that stand up all winter long,” says Richard, pleased with his 1996 Deere 435 round baler. “Several parts were put on backward at the factory, including the rear door closure. However, after we got it set up right it worked good. “My worst buy is my Reese 10-ft. 3-in. mower. We couldn’t cut as fast with it as we could with our other mower. Also, we were told that the belts would last forever, but they broke the first season.”
Howard H. Mann, Rutland, Mass.: Howard's impressed with his 1993 Welger round baler equipped with a net wrap attachment. “It’sa pleasure to entera field and not have to worry about belt splices breaking or net wrapping around the rolls. We owned Deere 430 and Deere 435 balers before we bought this model.”
Dave McFadden, Lakefield, Ontario: Dave likes his Deere 435 and 430 round balers, “We use them for custom work, making 3,000 to 4,000 bales per year. They allow us to bale day-after day without breaking down and produce excellent bales. “My worst buy is my 1989 MacDon swather. The only good parts on this machine are the engine and cab. The drive chain on the conditioner has to be adjusted every day, and the guards bend easily. The muffler and rear axle broke right off. Luckily, the axle broke in the field and not on the road. The company is trying to take care of the problems.”
Don K. Winfree, McLeansville, N.C.: “Jt’s simple and easy to operate,” says Don about his “best buy” Deere 435 round baler. “It makes bales from 39 to 72 in. high and 4 ft. wide. The monitor lets me know when the gate is closed, which side of the baler needs more hay, when the bale is done, when the bale is oversized, and when it’s being wrapped. I’ve used it to make about 500 bales with no problems.”
James Eads, Jonesville, N.C.: “It produces excellent bales and the bale wrap does an excellent job of shedding water resulting in little loss of hay,” says James about his “best buy” 1990 Deere 435 round baler. “My 1990 Ariens 8 hp riding mower is a worst buy. It has a 30-in. cut. It won’t run properly and is always out of adjustment.”
John Deere 4600 tractor
5 Best Buys3 Worst BuysHe likes his Deere tractors but is disappointed with the cost of parts for them. “I was spraying weeds in tall grass with my Deere 2503 when grass got caught in the tractor’s rear axle and ruined the seal. It cost about $2,400 to replace it.
“Last year the plastic hood and cowling on my 2000 Deere 4600 came apart and fell off. The company wanted more than $1,200 to replace them.”
He likes his Deere tractors but is disappointed with the cost of parts for them. “I was spraying weeds in tall grass with my Deere 2503 when grass got caught in the tractor’s rear axle and ruined the seal. It cost about $2,400 to replace it.
“Last year the plastic hood and cowling on my 2000 Deere 4600 tractor came apart and fell off. The company wanted more than $1,200 to replace them.”
“My 2000 Deere 4600 utility tractor has done everything I’ve asked of it and more. However, the hood and cowling are made of plastic. The first year the cowling cracked and I glued it back together. Recently a big hole developed in one side of the hood and I didn’t see it until I needed to use the tractor. When I went to lift the hood, it cracked and broke in three places. It cost about $800 to replace.”
“I like my Deere 4600 tractor equipped with a 460 front-end loader, which I bought used with 350 hours on it. A landscaper had used this tractor so I installed new ag tires on it. So far, I’ve used it to move more than 2,000 cubic yards of sand and snow with no problems.
“My 2000 Mantis rototiller runs great and has required only one tune-up since I bought it.”
“My 2000 Deere 4600 utility tractor is my worst buy. The body is made of a plastic type of material that’s falling apart at the hood, grill, cowl, and fuel filler cap. All these parts are either shattered or cracking and coming apart. I tried several times to get help from the company but with no luck.”
“My Scag zero turn riding mower cuts straight and level with no problems. It’s a best buy (Scag Power Equipment, Mayville, Wis. www.scag.com).”
“My best buy is my Deere 4600 tractor and the implements I use with it. After using it for one year I couldn’t be more pleased. The tractor handles each implement nicely and is stable and well balanced even on steep hills. It starts immediately even in the winter without using the block heater and is fuel efficient. The steering is effortless and the hydraulics are so powerful that the loader can easily lift big, heavy bales, even with the engine at a slow idle. It does the work of a much larger tractor.”
John Deere 4640 tractor
6 Best Buys0 Worst Buys“My 1982 Deere 4640 tractor is my best buy. It has a great cab and more power than my Deere 4320.”
Larry bought a 1982 Deere 4640 tractor used with 2,500 hours on it and says it’s his “best buy”. “It has a lot of power and is easy to service. This tractor doesn’t have a lot of electronic gadgets on it, and I like that.”
Robert’s “very satisfied” with his 1982 Deere 4640 tractor. “It has about 7,300 hours on it with no major problems and still has the original engine and transmission. I also have a Deere 4430 with more than 10,000 hours on it and virtually everything on it is original. Only the air conditioning pump and the alternator have been replaced. The fuel economy on Deere’s 30 and 40 series tractors isn’t good, but everything else about these tractors is so good that I can overlook that problem. No other tractor even comes close in quality to this one. I still prefer these old tractors to the new ones my neighbors have.”
Oscar D. White, Burlington, Iowa: “My 1993 Deere 4255 tractor has only a few hours, but I'm well pleased with it so far. My only complaint is that it idles at 890 to 920 rpm’s. A linkage adjustment was made, but if anything the problem is worse now. I’ve had several Deere tractors over the years and they’re hard to beat. I’m sure some adjustment can be made.” Ronnie Roe, Junction, Ill; “My 1979 Deere 4640 tractor keeps right on going and still works as good as itdid when it was new. My Deere 4020 tractor has over 6,800 hours and is still going strong.”
Ronnie Roe, Junction, Ill.: “My 1979 Deere 4640 tractor keeps right on going and still works as good as itdid when it was new. My Deere 4020 tractor has over 6,800 hours and is still going strong.”
Joseph Adams, Roberts, Ill..; “My 1978 International 1586 tractor is a worst buy. It has had numerous repairs including failed O-rings, anew rear housing ($832 for ring ominate t Buys gear and pinion), radiator repairs, a cracked hydraulic line, rebuilt starter ($400), new hydraulic mainline, resurfacing of the exhaust manifold, alternator repairs, new head gasket, new clutch, new rear end bearing, a leaky 3-pt. cylinder, new rings, bearings, oil pump, oil gauge, rear end, and some transmission problems. Most of the repairs came in the spring and fall, causing lots of headaches and hassles. We had about $17,000 in repair bills before we finally traded this junker in for a used 1988 Deere 4640. “We like our M & W Earthmaster 1165 tillage tool. We pull it with a Deere 8430 tractor. It stays in the ground and does a really fine job. M & W's no-till rotary hoe is aggressive and works well, when it’s needed, “Our 1987 Cam Spray GH1200 high pressure washer is a best buy. It has plenty of pressure and volume. The Honda GX110 engine always starts. Itruns quict and is easy on fuel. I use this washer a lot and it works great. “Our 1988 Apple Macintosh SE computer and Imagewriter II printer is also a best buy. It has 2.5 megabytes of RAM and a 40 megabyte internal hard drive. The Apple computer is easy to use. I bought mine used and I didn’t get (and don’t need) the manual. The computer is a bit overpriced, but worth it. Quickletter lets us easily make letters, envelopes, and addresses. Quicken helps us keep the checkbook balanced. On Cue starts programs pronto. Excel does about anything with numbers and in formation. Microsoft Word does the same with text. All in all, Apple Mac is fun and easy to use.”
John Deere 4955 tractorruns smooth
5 Best Buys1 Worst BuyDonald C. Reetz, Webster, S. Dak.: “My 1989 Deere 4755 wactor equipped with MFWD is one of my best buys, as were all the other 13 Deere tractors I've owned since 1969, purchased the 4755 used and have put about 2,200 hours on it without any down time or repairs. T liked its traction, power, handling ease, and comfortable, roomy cab, In fact, [liked the 4755 so much, traded it for a 1991 Deere 4955, also equipped with MFWD, last winter “One of my worst buys a Rem 1026 grain vac. Since T bought it new in 1992, T have had to repair its belts, bearings. chains. and sprockets, and flex tubing. Trouble is. parts are priced sky high. There must be a 100 to 150% markup to the customer by the time they get through the distribution chain.”
Darren Batman, Ingalls, Kan.: Darren's the satisfied owner of Deere 4955, 4555, and 4455 tractors. “No breakdowns or downtime on any of them. I bought extra tenders for the 4955 because it's equipped with front wheel assist, as well as add-on lights. The tractors need more leg room, especially by the power shift levers. added a joystick to make the loader on the 4455 easier to operate.”
Marke A. Lyon, LaRue, Ohio: Marke’s unhappy with his Crustbuster 30-fi. grain drill. “The disc openers were supposed to last 3,000 acres or more but wore out in the first 1,200 acres. The company wouldn’t pay for new ones and provided very poor service. “My 1990 Deere 4955 tractorruns smooth and is dependable. It’s a best buy.”
Brian Brownell, Hooper, Colo.: A 1990 Deere 4955 tractor equipped with mechaniei QXinate SUS cal front wheel drive heads Brian’s “best buy” list. “Ithas lots of power on the ground where I need it. A ground speed radar and computer help me choose the best gear for any particular job. “My two 1990 GMC Sierra 4-WD pickups are also best buys, They look good, are a pleasure to drive, and get good mileage. They’re a big improvement over the 1987 GMC models they replaced.”
Bibb Mims, Uriah, Ala.: “My 1990 Deere 4955 tractor has plenty of power, is fuel efficient, and handles well. It’s a good all-around tractor.”
Jim Barnes, Glen Allan, Miss.: “My 1989 Deere 4955 tractor equipped with mechanical front wheel drive hasa lot of useable power and traction. Surprisingly, it uses much less fuel per hour than our 4840's while outpulling them, It pays for itself in improved economy and performance.”
John Deere 5520 cab tractor
5 Best Buys1 Worst Buy“I bought a used 2001 Deere 5520 cab tractor with about 600 hrs. on it, but soon it developed fuel problems. I replaced the fuel filter and rubber fuel lines, since the tractor didn’t have a fuel pump and was having trouble bringing fuel up from under the cab. I finally installed an aftermarket fuel pump outside the fuel tank, which solved the problem. I’ve since replaced the fuel pump once.”
“The Deere 5520 tractor I bought in 2005 has more than 2,000 hrs. on it with no problems. All I do is change the oil and add diesel fuel. It’s the main tractor on my 270-acre farm.”
“My 2006 Deere 5520 tractor is my best buy. It has a lot of power, is well balanced, has good traction, and runs smooth.
“My Poulan Pro 310 chainsaw is my worst buy. It’s hard to start and doesn’t run right even though I’ve taken it back to the dealer several times. Also, it uses a lot of gas. It takes three to four tanks of gas just to trim the limbs from a 14-in. dia. pine tree.”
“Our Deere 5520 tractor equipped with a front-end loader is our best buy. We use it for many chores around our farm, and even at home to paint the house and wash windows.”
“I like my Deere 5520 tractor equipped with a cab and 541 front-end loader. It has a great hydraulic system, and the 4-cyl. diesel engine provides plenty of fuel-efficient power. It also has a good air conditioner and heater. This tractor has a short turning radius and it always starts, even in cold weather. The loader bucket is easy to remove.”
“My 2004 Deere 5520 tractor equipped with a Deere 541 front-end loader is my best buy. This tractor is easy to start in cold weather and extremely easy to operate.”
John Deere 70 diesel tractor
6 Best Buys0 Worst Buys“Years ago I bought a 1954 Deere 70 diesel tractor which I still use to rake hay and to pull wagons and a 14-ft. disk. The pony motor still works fine and the tractor uses less than one gallon of fuel per hour doing light work. I own some great Deere 20 series tractors including a 4010, 4020, and 3020, but I love my 70 the best.
“I recently bought a Stihl 200 electric chainsaw and find that it works even better than advertised. It’s lightweight, and the battery lasts more than the one hour that’s promised. I can set this saw down when cutting brush and do something else, then just push a button to restart it. It cuts fast and is a joy to operate.”
“I bought my first Volvo new in 1979 and my fifth one – a used 2007 XC90 model – last October. No other car comes close to the Volvo for performance.
“My 1980 Steiger Bearcat tractor has almost 6,000 hours on it. I use it to pull a 40-ft. Conservapak seeder equipped with a liquid caddy. It burns less than 6 gal. per hour.
“During harvest I use my 1955 Deere 70 tractor with a 51-ft. swing-away auger. This tractor is also easy on fuel.”
“I bought my 1944 Deere 70 diesel tractor used in 1964 as my ‘big’ tractor, and it’s still my best buy ever. I used it to plow with four 14-in. moldboards, and I also disked and planted with it. I never had any problems with the pony motor and I replaced the plugs and points only once. I replaced the head gasket on the main engine 19 years ago. Now I use this tractor with a 16-ft. digger in my garden and to mow CRP land during the summer. In my opinion it’s the most economical tractor ever built. I’m more than satisfied with it.
“My Rotozip saw was given to me as a gift, via a TV commercial. It had problems. First, the handle came apart. They replaced that, and then while I was cutting holes in sheet rock the motor started smoking and quit. They said I had abused the saw. Now I use a key hole saw, and it works just fine.”
David’s happy with his 1974 Deere 70 lawn tractor which he bought used 10 years ago. “With a little tender loving care we’ll be using it for a long time to come.”
Sanford Halverson, Deerfield, Wis.: “1 nominate my Deere 70 tractor which I bought new in 1956 as my best buy. No problems. wish I could buy another one. This tractor is still ready to do a full day’s work.”
Ozzie Brensdal, Westby, Mont.: Ozzic is happy with his 1988 Brandt 847 grain auger. “It's equipped with 9-in. flighting at the intake end which is about 14 in. long. This gives it the same capacity as a 10-in. auger. It’s well balanced and casy to move.” The Onan 2-cylinder motor on his 1989 Deere 70 skid steer loader is a “worst buy”. “The valve seats come loose. To solve the problem the engine must be taken out and a special tool used to replace them. It makes a simple task very expensive.”
John Deere 8300 tractor
5 Best Buys1 Worst Buy“My 1998 Deere 8300 and 7410 tractors are both a pleasure to operate.”
“I like my Orthman 8350 ridge till cultivator. It works great in high residue without plugging and has easy-to-use adjustments. Also, the company provides great service.
“I use my Deere 8300 tractor to pull the cultivator and it’s also a best buy. It’s comfortable, quiet, and easy on fuel. The view from the cab is great.”
On the negative side, he had trouble with hisDeere 886 cultivator and Deere guidance hitch for it. “The cultivator was always plugging up with residue so the company sent a representative out to our farm. He came out after a heavy rain, told me the cultivator was plugging because of the wet conditions, and left. However, the cultivator had been plugging up even in perfectly dry ground. Another problem was that the guidance hitch was equipped with electric controls and therefore could only be pulled by my Deere 8300 tractor. I finally traded both units off for the Orthman cultivator.”
“My best buy 1979 International 986 tractor has more than 5,000 hours on it with no problems at all. “My 1986 Gleaner M3 combine does a good job in corn and beans. It’s been trouble-free. “My International 800 planter is a best buy. I use it to no-till corn and soybeans. It does a good job.” On the minus side, he lists his Deere 8300 grain drill. “It was high priced and equipped with Tru-Vee openers that never worked right. It didn’t cover the seed properly no matter how many times I worked the ground.”
Richard’s had trouble with his 1995 Deere 8300 tractor. “Everything that could go wrong with it, did go wrong. I traded it for a 2-year-old Versatile 946 tractor which is my best buy ever. I love it.”
Dale owns a “best buy” 1995 Deere 8300 tractor. “I test drove this model and a Case-IH Magnum tractor for two days, pulling identical Earthmaster tillage implements, and there was no comparison. The Deere has a superior ride and a cab door that’s easier to enter and exit. Also, the cab’s expanded glass area provides excellent visibility.”
“I’ve had good luck with my 1996 Deere 8300 tractor. It has a short turning radius even when I set it up for 30-in. rows. The cab gives me a good view and the controls are right at my fingertips. It has excellent torque and power at all rpm’s and is user friendly. “My 1995 Deere 9400 combine is a best buy. This is my second 9400 and both of them have been great. It has a lot of power and capacity for my 6-row 30-in. corn head and 20-ft. bean platform. I like the 17-ft. unloading auger and Vittetoe chaff spreader that I mounted on it. It’s a combine that’s easy to operate.”
John Deere X300 lawn tractor
6 Best Buys1 Worst Buy“My Deere X300 lawn tractor has a good engine, a Kawasaki 2-cyl., that starts easily, has power and works fine. The 48-in. mower does okay. The problem is that the hydrostat transmission slips, and the tractor won’t go up the hill in my yard. I have tried filling up the transmission, but that didn’t fix the problem. After checking on the internet, I discovered others having trouble with their rider mowers with the Tuff Torq hydrostatic transmissions. It’s too bad that Deere made a good mowing machine and then put a dud of a transmission in it.”
“My Deere X300 lawn tractor has operated flawlessly for more than 400 hrs. with only standard maintenance.
“My worst buy is a 2017 Chevy Colorado pickup. This truck suffered drive train issues after the first 12 mos. in service. It required two transmission fluid flushes and a replacement torque converter. The oil coolant lines leaked, requiring a tow. All of this was covered under warranty, but my loss of confidence in this truck was irreparable.”
“No problems with the Deere X300 riding mower I bought used at an auction sale.
“The problem with installing a DEF (Diesel Exhaust Fluid) system on any diesel engine is that it robs power.”
“Our 2012 Deere X300 riding mower is a pleasure to operate. We bought new blades for it, but otherwise it has required only routine maintenance. It’s built with Deere quality that really shines through. I wouldn’t hesitate to buy another one.
“We bought a set of 4 Nokian Vatiiva SUV tires, but after only about 6,000 miles 2 of the tires blew out just 3 days apart. Fortunately, we weren’t driving at a high speed. The dealer told us no warranty is available on these tires, but said they’d had good luck with them. You sure couldn’t prove it by us. We ended up spending more than $800 on another set of tires - a different brand, of course.”
“My 2012 Deere X300 riding mower starts easy, is comfortable to drive, and cuts evenly.”
He says his 2009 Deere X-300 garden tractor starts great no matter what the temperature is and has a lot of power. “I use a snowblower and mower deck with it. They both work great and are easy to change over.”
John Deere 2240 tractor
4 Best Buys1 Worst Buy“The 1980’s Deere 2240 tractor I bought used had a lot of problems including with the transmission, brakes, hydraulics, water pump, fuel pump, and engine. In fact, every time I turned around something seemed to be going wrong. Finally the engine gave out so I sold the tractor for junk. I’ll never buy another Deere again.”
“My son bought a new Kubota 4-WD tractor equipped with a Bobcat grapple. It’s the only new equipment that I get to use. We use it to load everything from logs to tree limbs to scrap iron. The only problem is it’s too small for some jobs.
“My 1978 Deere 2240 tractor is still going strong.”
“It hasn’t been in the shop since I bought it,” says Keith, pleased with his 1980 Deere 2240 tractor. “It needs a new safety switch now, which will be the first repair I’ve had to make on this tractor.”
“My 1977 Deere 2240 tractor equipped with a 145 frontend loader is my best buy. It has required only one new fan belt and new batteries.
“Other best buys include my 1989 Lely 205 5-disc mower, 1994 Hesston 540 round baler, 1977 Kuhn 14-ft. pull-type hay tedder, and Deere 650 3-pt. side delivery hay rake.”
Billy M. Fricks, Muldrow, Okla.: “My best buy is my 1973 Deere 110 lawn and garden tractor. I've had to tune it up only a couple of times and have otherwise only changed belts and bearings on the deck. It still runs like new and is on only its second battery. “My Deere 2240 50 hp tractor equipped with a front-end loader is a best buy. I bought it used in 1981 and have had few problems with it. I replaced the water pump and rebuilt the starter.”
John Deere 450 grain drill
2 Best Buys3 Worst BuysJim’s happy with his 1995 Deere 450 grain drill. “I like it because it’s easy to set the seeding rate. Also, I like the double disc openers and the press wheel design. Overall, it’s a good drill. My only complaint is that it’s made from light material.”
He isn’t impressed with his 1995 Deere 7300 planter. “One problem is that it’s built out of light material. Another is that it’s a plateless planter which makes it hard to set the seeding rate, especially for cotton. I traded in my Deere 7100 planter which was 12 years old, and it worked a lot better than this one.
“I’ve owned three Deere 4240 tractors and liked all of them. Hardly any problems at all.”
Larue’s disappointed with his Deere 450 manure spreader which he bought used when it was one year old. “I use straw to bed my beef cows, and the spreader grabs large gobs of strawy manure and leaves piles in the field. It doesn’t work right without the optional top beater, which sells for almost $1,000. I think the top beater should be standard equipment so the spreader could handle any type of manure. At the very least, the top beater shouldn’t be so expensive.”
“It’s simple and easy to operate and makes nice, tight bales,” says Kevin, pleased with his 1994 New Holland 660 autowrap round baler.
“I’m disappointed with my 1995 Deere 450 grain drill. The depth gauging press wheels are hard to adjust and I can’t get it to cover the seed adequately. It just scatters seed on top of the ground. It was put together wrong when it was delivered so I had to change some things. But it still doesn’t work right.”
James Walker, Leonard, Minn.: A used 1985 Hesston 1091 mower-conditioner rates as James’s “best buy”. “The header is suspended so well that it floats over gopher mounds and rocks as if it could see them coming. It runs smooth and quiet and is an incredibly well-engineered piece of equipment. “The header is suspended so well that it floats over gopher mounds and rocks as if it could see them coming.” “One of my best buys ever is my 1959 Case 600 diesel tractor. It has power steering, live dual hydraulics, live pto, is fuel efficient and has plenty of power. I bought it used four years ago for only $1,200 and my only maintenance expense has been to replace the fan belt and fuel and oil filters. Ithas an oil-bath hand clutch which is what turns most people away from it but, even though it’s 34 years old, it'll probably sull outlast some tractors built in 1993. It has features such as triple fuel filters and water drains that make me think it was designed to last a lifetime. It’s quite a contrast to the high tech, high torque, high-priced, throwaway stuff we see so much of nowadays.” On the negative side, James is disappointed with his Deere 450 mower equipped with a 9-ft. sickle bar. “It did a good job of cutting, but the wobble box was difficult to work on. I don’t recall this mower going for a full season without requiring at least one new set of bearings and a few new sickle head bushings.”
August Von Behren, Shelbyville, Ill.: August is pleased with his 1989 Chevrolet 1500 pickup but has had a couple problems with it. “It had 9,000 miles on it when the fuel pump went bad. I took it back to the dealer and he installed a new pump. Then at 19,000 miles the starter failed to work right and the dealer replaced it under warranty. There have been two or three other small problems, but each time my dealer solved the problem. The pickup is easy to service, has a cab with plenty of room, and is easy to drive and handle. The V-6 engine runs quiet and is fuel efficient.” William V. Tucker, Butler, Ill. “Itdoesa good job - plants accurately. We're pleased with it,” says William about his “best buy” Deere 450 drill. “Our Bachtold weed mower is our worst buy. We've had two other Bachtold mowers in the past and they worked satisfactorily, but we don’t like this new one, We hope the company changes the design and also gets ours working right. It isn’t balanced right and is difficult to use.”
John Deere 4850 tractor
4 Best Buys1 Worst BuyRobert L. Dunlap, Eaton, Ohio: “1 wish the 1,000 rpm pto was 1 3/8 in, in diameter,” says Robert, who is otherwise pleased with his 1988 Deere 4850 tractor, “It has adequate power and the automatic transmission shifts well.”
Jimmy Newby, Ardmore, Tenn.: “It's the most satisfying product I’ve bought lately,” says Jimmy, pleased with the front wheel assist on his Deere 4850 tractor. “When we flip the front wheel drive on and off under load we can immediately see the advantages of front whee! drive. I’m also sold on the tractor’s radial tires. They offer a better ride, less compaction, and longer life.”
Dennis Harlan, Terre Haute, Ind.: Dennis is disappointed with his 1986 Deere 4850 tractor equipped with mechanical front wheel drive. “This tractor has been somewhat of a lemon. At less than 6 months the engine blew up. We had toargue with Deere about getting it completely rebuilt. All they wanted to do was install a new intercooler and one new piston sleeve after the tractor sat in the dealer’s shop for a week with antifreeze throughout the engine because they didn’t have time to work on it. Before the engine blew up, it would overheat. It took the dealer two months to figure out that the slip clutch fan was bad. Also both 14.9 by 30 front tires had the wrong size tubes inside them which caused them to go flat. The front wheel drive wouldn’t shut off, It took two weeks to fix, The engine doesn’t seem to have any pulling power like our old International did even though after the warranty was over we had it turned up 10%. We also had several little things go wrong from lack of quality workmanship. The tractor needs more power and better quality control, but it is a pleasure to drive because of the 15-speed powershift and the comfortable cab.” Lorenzo Whitcomb,
Tom Jackson, Ardrossan, Alberta: “It’s beena very costly truck over the first65,000 miles,” says Tom about his 1983 Chevrolet 6.2-liter diesel pickup equipped with a 4speed overdrive automatic transmission. “The engine heads cracked between the valves. I was told it was the manufacturer's fault, but they wouldn't do anything. The head gaskets leaked and the overdrive automatic failed. I was told that was a manufacturer’s flaw, too, but no warranty coverage. “My 1987 Deere 4850 tractor equipped with mechanical front wheel drive has a very versatile pto and is a great pulling tractor. I use it to pull a 40-ft. deep tillage cultivator. It does the same job as large 4WD tractors on lighter draft jobs, but requires 30% less fuel. The 15-speed powershift transmission is the nicest transmission I've ever operated. “Another best buy is the air foil chaffer on my 1986 Deere 8820 combine. It increased capacity by 15 to 20% and works very good in crops with heavy chaff loads.” Clarence Jackelen,
Bertram Willett, Paducah, Kentucky: “It does an excellent job except that it’s difficult to dry grain to the exact moisture we want,” says Bertram about his Shivyers Circulator-2 drying system. “We recently added a Generation II Comp-U-Dry that’s computer controlled and dries by moisture rather than by heat. It increases our drying capacity and prevents costly overdrying. It makes adjustments every 5 min. anda printout provides details of each moisture test, “Our Deere 4850 tractor equipped with front wheel assist is powerful, fuel efficient, and a pleasure to operate.”
John Deere 4960 tractors
5 Best Buys0 Worst Buys“We own three Deere 4960 tractors with a total of 8,000 hrs. on them, with very few repairs. These tractors are economical to maintain, and they don’t have any electronic controls to go wrong as on the newer tractors.
“I also own two Deere 8420 tractors and two 8520’s. They all have push button electronic controls, which I think was a big mistake. We’ve had lots of trouble with them. Someone needs to make a good manually-controlled big tractor.”
“I’m satisfied with my 1993 Deere 4960 tractor. It has 7,960 hours on it and has required few repairs.”
“My Deere 9976 6-row cotton picker is my best buy. It’s the fastest cleanest picker I’ve used in the 45 years I’ve harvested cotton. I’ve had very few problems with it.
“We have three Deere 4960 tractors with a lot of hours and no problems. They’re very economical to run. They have a lot of power and handle with ease.
“My Bush Hog 4214 pull-type cutter equipped with an offset center gearbox is my worst buy. It leaves strips of uncut grass or weeds. The company wouldn’t listen when we complained about the problems. I won’t buy any more Bush Hog products.
Bill’s the proud owner of three “all time best buy” Deere 4960 tractors. “They each have over 3,000 trouble-free hours on them and still run like Cadillacs,” he says. “Why did John Deere ever build anything else?”
Jack Turner, Elkhart, Kan.: “My 1990 7140 Case-IH MFWD equipped with powershift transmission has a larger cab, quieter engine, less power hop under heavy load, and a smoother power shift, especially downshifting, than the Deere 4960's that I lease. At 5,000 hours it uses less oil than the 4960's at 500 hours.”
John Deere 6200 tractors
5 Best Buys0 Worst Buys“We bought two Deere 6200 tractors (one with a cab and one without) and they are the best investments we’ve ever made. They are reliable workhorses and if they were still available, we’d buy two new ones tomorrow, even if we had to borrow every penny to do it.
“We haven’t been happy with our 2015 Deere 6105M tractor. It’s a shame that Deere made a tractor with such a good engine and transmission yet is still a total lemon due to electrical and radiator design issues. There is a different warning flashing on the dash of this tractor every time we get in it and only one ever turned out to be legitimate. The owner’s manual doesn’t even list a majority of the codes so we can’t even check on what it’s reporting.”
“I like my 1998 Chevrolet Silverado 1500 extended cab pickup. No problems. I follow the company’s service schedule which helps a lot. It has more than 40,000 miles on it.
“I use my 1998 Deere 6200 tractor for doing loader work. I had to replace the pto switch soon after I bought it, but otherwise it’s been trouble-free.
“My Deere 4455 MFWD tractor has almost 2,000 hours and has worked perfect.”
“We’ve had a few minor problems but the dealer took care of them right away,” says Olin, satisfied owner of a 1996 Deere 6200. “This is the fourth Deere I’ve bought since 1973 and the 6200 has been the best of the bunch.”
Greg Hoeing, Glenwood, Ind.: A 1994 Deere 6200 tractor equipped with a 620 loader rates as Greg's “best buy”. “It's the most versalile tractor Pve ever driven. 1s small enough (o get in and out of barns but powerful enough that it can handle tough chores. use it every day to move round bales. It takes only about LO seconds to change the quick-tach‘bucket. It also has a lot of power for its size. normally use a 100 hp tractor to operate my round baler, which ts supposed to require at leust an 85 hp tractor. When the 100 hp tractor broke down recently [ replaced 11 with my 66 hp 6200 and it had more than enough power to do the job. “My 1991 Claas Contour 3.80 rotary rake is my worst buy. It does a fabulous job raking hay but after only two years of use it started to fall apart. The bearings on the center camshaft went out for a total repair bill of $800. Then the frame started to break so that the curtain fell onto the arms. That repair cost $250. A year later the bearings went out again, taking the camshalt with them. replaced it with a Kuhn and so far I like it.”
Fentress Goforth, Covington, Tenn.: A 1993 Deere 6200 tractor heads Fentress’s “best buy” list.“The cab is comfortable and provides the operator with exceptional visibility.”
John Deere 730 diesel tractor
4 Best Buys1 Worst BuyDavid’s “best buy” is his 1960 Deere 730 diesel tractor. “Even though this tractor is more than 50 years old it still works as good as newer models with more power. It uses one third less fuel than the New Holland 7610 model that it replaced. It pulls a Deere 435 round baler with ease.”
“In 1978 I bought a used Deere 730 diesel tractor from a local dairy farmer, who was the original owner. I’ve used this tractor to plow, plant, cultivate and to pull an Allis Chalmers 90 combine to harvest about 70 acres of soybeans. I’ve also used the tractor to bush hog, pull up trees, and to do many other chores. Over the years it has required only a few minor repairs.
“In 1998 I bought a used Kubota B7200 tractor equipped with a belly-mount mower deck, and both the tractor and mower have required only minor repairs. The tractor now has about 1,900 hours on it. I plan to make a 3-pt. mounted, 12-gal. spray tank and 8-ft spray boom unit and mount it on the tractor. I’ll use it with a wand on small areas and fence rows.”
“Our Deere 730 diesel tractor has about 18,500 hours on it, yet the engine has never been overhauled.”
“I like my 1998 Deere 730 air seeder equipped with a 787 cart, which I bought used. We got a perfect stand. It’s well built and should last a long time. We bought it sight unseen from Far Better Farm Equipment in Westport, South Dakota, and it arrived in perfect shape.”
Marvin’s the satisfied owner of a 1997 Deere 9400 4-WD tractor equipped with triple wheels. “I love to drive it. It has a lot more pulling power than the company’s previous 8970 model. I used it last year to pull a 54-ft. chisel plow and it used only 1/2 gallon per acre of fuel. I can hardly believe that much power can be delivered on such little fuel.”
On the “worst buy” side, “My Deere 730 air drill was a nightmare to use. Anywhere in the field that was a little wet the discs would mud up, causing them to slide along which left seed on top of the ground. I traded it for a Deere 1850 no-till air drill. It never muds up and seeds equally well in conventional or no-till. I love it.”
John Deere 7810 tractor equipped
5 Best Buys0 Worst BuysA 2000 Deere 7810 tractor equipped with an 840 front-end loader and grapple fork rates as David’s “best buy”. “It’s a superb all-around tractor. I especially like the 20-speed power quad transmission with left hand re-verser. We’ve used this tractor almost every day for moving hay, mowing, loading and unloading, etc. No problems at all.”
“My best buy is my 1998 Deere 7810 tractor. It has more power than a 7800 and is easier on fuel. It’s been trouble-free.
“My 1998 Case-IH 2366 combine is a dependable machine that has a lot of capacity and is a pleasure to operate. However, I wish it had a hydraulic feeder reverser on it.
“My Makita reciprocating saw is my worst buy. After the warranty expired, the saw did, too.”
Tim nominates his Deere 7810 tractor as his “best buy”. “It has great lugging power and is easy on fuel. The lights on it are really good and could light up a football field. We had a few minor problems with this tractor at first, but the dealer promptly took care of them. Otherwise, this tractor has been trouble-free.”
“It’s comfortable and easy to operate. I’m not completely exhausted at the end of the day like I have been with some other tractors,” says Robert about his 1997 Deere 7810 equipped with MFWD and self-leveling loader. “When baling, you simply knock the shuttle shift transmission into neutral, finish tying the bale, then knock it back into gear without ever having to touch the clutch pedal.”
John’s Deere 7810 is a “best buy.” “ It’s a great tractor, with a lot of power and good fuel economy. It’s the best tractor I’ve ever owned for operator comfort.”
John Deere 7810 MFWD tractor
5 Best Buys0 Worst Buys“Our 2000 Deere 7810 MFWD tractor has worked flawlessly, and our Deere 7710 MFWD tractor has about 10,000 trouble-free hours on it. I think these tractor models are as good as the 4020’s of the late 1990’s.”
He’s impressed with Thunderstruck heavy duty replacement bumpers for pickups (www.thunderstruckbumpers.com; ph 800 240-9392). We have a lot of deer in our area, but they just bounce off these bumpers when we hit them on the highway.”
“The ‘Will Borrow’ from Wesley Enterprises in Silex, Mo., is a kit for wheelbarrows that adds two back wheels and a horizontal handlebar extension that’s about waist high
(www.carrilitecorrals.com). This is a great
product for women or people with back
problems. Since you roll the load instead and performance of this one,” says Jeff about his 2003 Deere 7810 MFWD model.
He nominates his 2002 Deere 7810 MFWD tractor as his “best buy”. “This is a nice tractor. It’s comfortable, quiet, has a good ride, is efficient and productive, and is built strong for its size. At the end of the day I don’t feel as beat up and worn out as I do with our other IH tractors. It actually helps get things moving on our farm early in the morning, because whoever gets to the field first gets to drive the 7810.”
He’s not impressed with his New Holland 1441 15-ft. discbine. “This machine won’t cut alfalfa without leaving a lot of it in the field. It leaves huge streaks of uncut hay between each cutterhead, It won’t cut short hay at all, and it beats the leaves off the hay as it throws it into the crimper. Also, it puts a lot of dirt in the windrow. The dealer said the blades would last 300 to 400 acres, but in our sand they could hardly finish 80 acres. The blades had to be changed daily. It’s a high maintenance machine, and its resale value was horrible. I’d never buy a New Holland discbine again.”
“Last May my 2000 Deere 7810 MFWD tractor burned up in a fire. I had just parked the tractor in my brother’s shed and was standing behind the tractor talking when we saw smoke coming out from under the side of the hood ahead of the cab. Three minutes later the flames were as high as the cab, and only a half hour later the tractor was completely burned. I’ve never seen anything burn so fast in my life. The shed caught on fire and burned to the ground, along with a tandem axle truck. It took only about 15 minutes for the fire department to arrive, but by that time it was too late to save anything.
“Investigators from my insurance company came out the next day. They said the fire probably started when either the hose clamps or the rubber fitting on a hydraulic oil line worked loose, allowing oil to leak out under pressure next to the tractor’s hot exhaust muffler and catch on fire. They could tell by the color of the metal that the fire was hottest in that part of the tractor. I think part of the reason the tractor burned so fast is that the oil line is under pressure, which caused oil to constantly feed into the fire. Another reason is that this tractor, like many models made today, has a plastic hood and fiberglass fuel tanks. The material melts when it gets hot.
“The tractor had only 550 hours on it and was still under warranty, but Deere claimed no responsibility and wouldn’t help at all. My insurance covered about 60 percent of the tractor’s cost. The insurance company called Deere but got the runaround. The truck that burned up was not insured.
“When the fire department came out they couldn’t get too close to the tractor because its tires started exploding, which created a dangerous situation. The tractor had dual wheels on back and single wheels on front. There wasn’t any fluid in the tires which makes them much more likely to blow up. I’ve never heard such explosions. Every time a tire blew up it sounded like a cannon was going off. The force of the explosions actually caused the tractor to move.
“My 7810 was my main tillage tractor and was one of the best tractors I’ve ever owned. It’s a 160 hp model that’s valued at about $98,000. To finish the season I rented a couple of tractors. I’m 65 years old so I probably won’t be able to buy a new replacement tractor. This incident made such an impression on me that whenever I’m driving on the highway and see a 7810 model working in the field, I stop and tell the operator what happened to my tractor.”
Larry’s impressed with his 1997 Deere 7810 MFWD tractor equipped with a power quad transmission. “We traded in a 10-year-old Case-IH 2294 tractor equipped with front wheel assist and powershift transmission. It was reliable and fuel efficient but had a long turning radius and a transmission that was difficult to shift between gear ranges. The 7810 turns short, shifts effortlessly between ranges, has a lot of power, and is fuel efficient.
“My 1993 Thurston Blue Jet Landtracker coulter caddy is one of the heaviest and best built on the market, but the 900 series coulters on it wear out too fast at the pivot point. The axles and pivot bushings went out after I used it on only 4,000 to 5,000 acres, causing the coulters to track poorly. Also, the company doesn’t make left and right side coulter assemblies which are required for better residue flow. I replaced 27 coulters with ones made by Till-Tech (RR 5, St. Thomas, Ontario N5P 3S9 ph 519 775-2405). This company offers left and right coulters that are larger in diameter and have longer pivot axles and bushings. The coulters are also equipped with an adjustable 2,200-lb. spring. They should last a long time.”
John Deere 8200 tractor
4 Best Buys1 Worst Buy“My 1999 Deere 8200 tractor has a lot of power. Also, it drives and handles nice.
“My 2004 Deere 6615 tractor has a much-improved transmission over the company’s 6605 model.
“My 2003 GM 2500 pickup equipped with a 6.0-liter engine is an excellent work truck with a lot of towing capacity. My 2004 GM 3500 pickup has a lot of power and towing capacity, and it accelerates well. It has a fairly nice ride.
“My 1999 Polaris Sportsman 500 has been trouble-free.”
“The PolyTech feeder house fan I use on my combine is a best buy (Poly Tech Industries, Monticello, Ga. ph 800 542-7659; www.polyskid.com). It keeps the dust away so I can see my bean head.
“I bought a 1997 Deere 8200 tractor used two years ago. It’s user friendly and a best buy.”
Ray’s worst buys are his two 1996 Deere 8200 tractors. “We had transmission problems from day one and they continued. No one could fix the tractors. Because of the transmission problems we almost lost a crop last year.”
Gary’s satisfied with his 1997 Deere 8200 tractor. “I like everything about it except for the transmission which is a little jerky compared to the transmission on a Case-IH. Otherwise, it’s a joy to drive. “Our 1994 1-ton Chevrolet dually pickup is a joke. It doesn’t have enough power and gets only about 8 mpg. My semi truck gets better mileage than that.”
“It’s the best tractor I’ve ever owned,” says Terry, happy with his 1996 Deere 8200. “It’s a pleasure to operate and has a quiet, roomy cab with a great view. The engine has a lot of torque and is fuel efficient. The transmission shifts a little rough in 13th gear but the working gears shift smooth. Deere has updated the transmission and I’m sure they’ll get this problem solved. My wife operates this tractor and also likes it.”
John Deere 870 compact tractor equipped
5 Best Buys0 Worst BuysLarry likes his Deere 870 and 970 tractors which he bought used. “These great small tractors are easy to drive and fuel efficient. I use them for tillage and mowing work. No problems.”
David’s impressed with his 1992 Deere 870 compact tractor equipped with a 3-cyl. diesel engine. “We use this tractor every day with no problems. It’s the most dependable piece of equipment we own.”
“My Deere 870 tractor equipped with a 3-cylinder and 28 hp diesel engine is my best buy. I think it’s the most economical tractor in its class, and it also has the highest torque diesel engine in its class. It has no trouble handling my 6-ft. rotary mower or my 5 1/2-ft. snowblower. I use it a lot to do custom snowblowing on 16 driveways and three church parking lots. It always starts right up without using glow plugs, even at temperatures down to 10 degrees below zero.
“I modified an old Cozy Cab to fit the tractor. The windows were broken so I installed new ones off a Massey Harris tractor cab. I modified just about every part of the Cozy Cab except the doors and window frames so it would fit the tractor. I paid $100 for the cab and $200 for the windows. The cab was originally built in one piece and was too heavy for one person to remove, so I rebuilt it to come off in pieces. The roof bolts onto the tractor’s roll cage. The front and back sides go on separately.”
“I’m impressed with my Deere 870 tractor that’s equipped with a 3-cyl., 28 hp diesel engine. In my opinion it’s the most economical tractor in its class and also has the highest torque. I use it during the summer to operate my 6-ft. rotary mower and during the winter to operate a 5 1/2 ft. snowblower.”
“My 1996Deere 870 tractor is easy to operate and works great for pulling my dolly wheel hay rake. Even when it runs at high rpm’s it’s so quiet that I can almost hear myself think. I also use it to pull wagons, operate an elevator, pull a harrow, and do other small jobs. The company should build these tractors equipped with rubber tracks for use on truck farms. Also, I wish it could be equipped with a mid-mount sicklebar so that I wouldn’t have to constantly look back while mowing. The tractor is easy on fuel, too. Once the engine overheated, but a new thermostat solved that problem. “My Ford F-150 1/2-ton 4-WD pickup is my worst buy. It’s built cheap and is too light in back. It must have been built from old Coca Cola cans. I think Ford and Chevy are competing with each other just to sell pickups to city people, emphasizing the pickup’s looks and so-called fuel economy. When I’m ready to buy another pickup I’ll go with Dodge and their Cummins diesel engine. At least they finally woke up and listened to the needs of farmers, who use pickups as work vehicles.”
John Deere 980 field cultivator
4 Best Buys1 Worst BuyRobert’s impressed with his Deere 980 field cultivator. “It’s equipped with a spike harrow and rolling basket and does a good job of seedbed preparation. One pass after chiseling corn stalks and I’m ready to plant oats. It handles trash well and prepares a nice, even seedbed.”
Ted’s the satisfied owner of a 1997 Deere 980 field cultivator. “I traded in a 15-year-old Willrich which I liked, but the Deere model is far superior. It’s easier to adjust, follows the ground better, holds an even depth, and is almost impossible to plug with trash. It even transports easier.”
“My Deere 980 field cultivator has plenty of trash clearance and leaves the ground smooth and level.
“My worst buy was my Deere 960 field cultivator. It was equipped with single wheels on the wings which prevented dirt from flowing and caused ridges.”
Michael’s impressed with his 1997 Deere 980 field cultivator equipped with a coil tine harrow. “It leaves a smooth seedbed and will handle any amount of residue. It even pulled through conditions where my Soil Saver plugged up last fall.”
“My 1995 Deere 980 field cultivator does a good job. It has a lot of clearance for trash and for road travel.”
John Deere L120 riding mower equipped
5 Best Buys0 Worst BuysBrian’s the owner of a 2004 Deere L120 riding mower equipped with a 2-cyl. gas engine and 48-in. deck. “The deck has been trouble-free and the engine has plenty of power. The machine’s big rear wheels make it easy to roll up steep hills. The mower belts have lasted almost 700 hrs. and the blades 400 hrs.
“However, this mower is built too light and its Tuff Torque transmission is difficult to service. Fortunately, after watching a YouTube video on how to service the transmission I was able to clean the magnets. Now it works like new. I also started using 5W-50 synthetic motor oil in the engine.”
“My 2003 Deere L120 riding mower equipped with a V-twin engine backfired every time I tried to shut it off. The dealer claimed there was a design flaw with the carburetor. Seven years and only 300 hours later, the machine started smoking under load even though this machine has always received regular maintenance. I expected more out of a Deere.
“I bought a used Gravely zero turn riding mower to replace the Deere mower. It uses only about half as much fuel and works faster – I can finish mowing about 45 minutes sooner than with the Deere. I have a swampy area that I couldn’t cut with the Deere, but the Gravely hardly slows down. I plan to sell the Deere mower this spring and buy a Gravely 260 model. The 260 can go almost twice as fast and cuts just as good, even though it has a larger deck.”
“My 2006 Deere L120 garden tractor is built well and has an excellent mower deck. No problems. In 2008 I bought a snowblower for it that also works good. This tractor is easy to handle because it has a hydrostatic transmission so I don’t have to shift gears.”
Abraham’s impressed with his 1986 Echo 400ELV chainsaw and his 1980’s Huskee lawn tractor. “The tractor is well-built, always starts, and has never failed me. It runs great every time.
“The deck bearing on my 2002 Deere L120 lawn tractor went out twice within a month. I always have to charge the batteries on the tractor before I can start it. Also, the tractor’s electric deck clutch won’t start even after the tractor has been running for a while.”
“My 2002 Poulan Pro Tach PT17 chainsaw has been trouble-free. I had to replace the spark plug and fuel pickup line. Otherwise it works great.
“My Deere L120 garden tractor has more than 145 hours on it and is a best buy. We use it to take care of more than three acres of reclaimed grass from wooded and pasture land.
“My Homelite PS33 chainsaw constantly leaks oil and is always hard to start. I found out it didn’t have a brake on it. I took it in for repairs but they couldn’t find anything wrong. I’ve also taken the saw completely apart and replaced the plugs and rebuilt the carburetor, but it didn’t help.
“My Eagle air compressor never worked right. I’ve spent more time working on it than using it.
“My Axis HVLP paint system is a best buy. No problems (ph 877 477-7823; www.aircraftspruce.com). It’s furnished with 20 ft. of air delivery hose and a spray gun.”
John Deere L130 riding mower
2 Best Buys3 Worst BuysDale’s disappointed with his 2003 Deere L130 riding mower. “I bought this mower thinking it would work better than others in its price range, but I was wrong. From day one, it wouldn’t cut without plugging up. I replaced self-tapping screws in the deck so now I can mow my yard and only have to clean off the deck 2 or 3 times. This machine isn’t even worth looking at.
“I’m disappointed with Deere as a company. For example, I was in the market for a new brush cutter this year. Deere’s MX6 model is made in Spain. Instead, I bought a Great Plains model that’s made in Kansas and is built much better. Too bad this great American company is selling out.”
“My worst buy is my 2003 Deere L130 lawn tractor. I’ve spent a total of $950 on repairs and parts on it. The tractor’s rear tires were poorly chosen and won’t pull the tractor up hills. I’m not sure if it was the tire profile or the tread that was the problem, but when I replaced the tires it made a big difference. The tractor had a weak front axle, and as a result eventually the front wheels bent outward. I had to remove the axle and heat and bend it in order to get the proper alignment back. There’s no way to adjust the tow-in. I had to replace the clutch at 400 hours. The front axle broke in half. I had to replace both steering rods and the steering sector gear and oil drain plug. I replaced normal maintenance items such as the belts, deck spindles, etc. Then this spring the transmission went out and it would have cost about $1,000 to replace. I said ‘no thank you’. The only good thing about this mower was the 23 hp Kohler engine.”
“I’m well pleased with my 2004 Deere L130 lawn tractor equipped with a 23 hp Kohler engine. I use this tractor to mow my 1-acre plus lawn. It has been trouble-free except for a deck clutch that had to be replaced. It starts easy, has plenty of power, and maneuvers well in tight places.”
“I’m impressed with my 1990 Dodge 250 pickup equipped with a 6-cyl. Cummins diesel engine. The odometer shows about 400,000 miles but it has been broken for the past six years. I use this pickup to haul wood out of the woods on two trailers. It’s a tough truck in every way. For example, I weigh 275 lbs. but the seat is still like new.”
On the negative side, “I’ve had to replace the blades six times on my 2006 Deere L130 and the center mandrell twice. Then the deck that holds the mandrell broke out. A friend who operates a machine shop cut some metal to cover the damaged portion and bolted the mandrell back in. If I don’t see a big change in the performance of this mower, I won’t ever buy a Deere again.”
Tim owns a 2004 Deere L130 lawn tractor equipped with a Kohler 27 hp engine. “After mowing one day, we returned the tractor to the barn. It caught fire and burned down the entire barn and all of our other farm equipment. A $2,800 tractor ended up costing us tens of thousands of dollars in lost equipment and time.”
John Deere LX188 mower
5 Best Buys0 Worst Buys“I read a report about someone who’s not happy with their Deere LX188 mower. I have a 1997 model and it also blows out a little exhaust smoke sometimes but it’s no big deal. I maintain the mower faithfully and it still works great today.
“My 2004 Mahindra 2615 diesel tractor starts hard below 40 degrees. I can’t figure it out. I have 10 second delay glow plugs. Below 40 degrees I have to give it a small sniff of starter fluid even though the owner’s manual says not to do that.”
Harold’s “best buy” is his 1993 Deere LX188 riding mower equipped with a Kawasaki 17 hp., 2-cyl. engine and 48-in. deck. “Up until a couple years ago I used this mower every year to mow 2 acres per week. I still use it to mow small plots, and to pull my Cyclone leaf mulcher.
“My 2015 Hustler X-One zero-turn riding mower equipped with a Kawasaki 23 hp. engine and 60-in. deck is a best buy.”
“My 1996 Deere LX188 riding mower equipped with a 17 hp Kawasaki twin-cylinder, liquid-cooled engine is my best buy. It still cuts grass as good as the first time I used it. No problems.
“My 2008 AquaTherm outdoor wood stove is awesome.”
Kenneth Hale, Cerulean, Kent.: Kenneth likes his 1993 Deere LX188 lawn mower. “It did a good job for us last summer. However, it is expensive.”
L. Kirkpatrick, Watino, Alberta: A 1991 Honda 18 hp riding lawn mower equipped with hydrostatic drive, a 46-in. “It has never worked a full day without a major breakdown. It's the biggest lemon I ever bought.” deck, and rear bagger heads his “worst buy” list. “The blower and bagger leaked grass, and dust plugged it up constantly, My dealer tried to fix it several times with no luck. I took it to Honda Canada in Vancouver a year ago and as of July 1 they still hadn’t fixed it. They tell me to wait, but the grass won't wait. Finally I bought a new Deere LX 188 with a 48-in. deck and a bagger. It’s twice the mower. I just wish I had bought it to start with.”
John Deere riding mower equipped
5 Best Buys0 Worst Buys“My LX188 Deere riding mower equipped with a Kawasaki engine is neither a best nor a worst buy. It does a good job of cutting, but the engine surges whenever the mower isn’t engaged. When the machine is cutting grass, the engine runs fine. I can’t find anyone who knows how to fix this problem. One person told me the engine must have an air leak. Okay, where? Deere won’t respond, nor will Kawasaki. Am I stuck with this problem, or can FARM SHOW readers help?”
“I bought a used 2010 Deere tractor equipped with a 4-cyl. diesel engine and am happy with it. It came equipped with a heavy duty frontend loader and power steering. I installed a block heater, and also bought a backhoe to use with it for cleaning out irrigation ditches.”
“This is a great little utility tractor,” says Harold about his Deere 2040 tractor equipped with a 40 hp engine. “I bought it used in 1998. It had 3,100 hours on it and now has about 5,000 trouble-free hours. It always starts right up and it’s easy on fuel.”
David’s impressed with his 1988 Deere mid-size tractor equipped with a front-end loader. “We used it to build a mini golf course and it worked great. I also use it a lot around my home.”
“I like my Deere chain saw equipped with a 20-in. bar and chain. It does an excellent job and always starts right up on the first pull. I’ve never had to work on it other than to do normal cleaning and maintenance. It just keeps begging for more work.”
On the “worst buy” side, he lists his 1999 Troy-bilt “Bronco” rear tine tiller. “If you happen to snag a root, the tiller swings you around and your hands get stuck on the handles. I paid $740 for it and used it only twice for a total of four hours. I complained to Lowes, the home improvement retailer where I bought the machine, and also to the manufacturer. They both said ‘tough luck’ I’ll never buy another Troy-bilt product again.”
John Deere skid loader
5 Best Buys0 Worst Buys“Stihl power equipment and a Deere skid loader and Compact 990 tractor have been very reliable.
“I have gone through four Campbell frost-free yard hydrants in three years. The packing seals keep failing. The company sent replacements once. These are a plastic material that even break while being handled. To get to the packing nut, the hydrant needs to be dug up and taken apart. These are not worth the money or time to buy and install.”
“We’re impressed with Deere skid loaders. Our 2010 318 has about 5,000 hrs. on it with only routine maintenance and an issue with a parking switch, and our 2016 333E has about 3,100 hrs. with no major problems. The final drives on both machines broke down, but that was our own fault because we were using the wrong oil. Fortunately, the company honored the warranty on both models. We also own a 333G with about 1,200 hrs. that has had no problems except for an emission sensor.”
“I am 78 years old. I purchased a John Deere 2032 tractor loader. I use it for hauling wood, to work my garden, and to haul produce to the cellar, etc. What a step saver and convenient unit for an elderly man. I should have purchased it when I was younger.”
Marvin likes his 2005 and 1999 Case 85XT skid loaders. “They have a lot of hours on them but have been trouble-free. The Cummins engines in older Case skid loaders are the best ever built. These 85XT’s will easily keep pace with the much newer and larger Deere 332D skid loaders.
“We bought 2 new Deere skid loaders in 2012 – a 320D and a 332D. The 320D has required extensive work on the drivetrain – all 4 drive chains had to be replaced as well as both drive motors. The company honored the warranty, but now that it has expired I’m afraid the problems will continue. Case makes a much sturdier machine although I do like the heated cabs on the Deeres.”
Neil’s the satisfied owner of 2 Deere tracked skid loaders – a 2006 CT332 model with about 1,700 hrs. and a 2008 CT322 with about 3,600 hrs. “Both machines ride smooth and float in mud. The CT332 has 17-in. wide tracks and the CT322 12-in. I use them to take out and install fences, and to cut 6,000 to 10,000 hedge posts per year. I have 14 different attachments that I can use on them. These skid loaders make hard work seem easy. I especially like not having to worry about flat tires.
“I use a HeatMaster MF5000 outdoor wood burning stove to heat my home. It goes through a big truck load of hedge wood every week, and I have to stoke it 3 to 5 times per day. The dealer says it goes through so much wood because I’m also heating my house’s basement. It’s a poor excuse for a wood stove.”
John Deere 1026R sub-compact tractor
4 Best Buys1 Worst Buy“My 2012 Deere 1026R sub-compact tractor is equipped with a backhoe, front-end loader, and 60-in. Auto Connect drive-over mower deck. It still looks and works just like new. The 3-cyl. Yanmar diesel engine has a lot of power and is easy on fuel.”
On the “worst buy” side, “I had to return my new Worx Hotshot cordless Hydroshot pressure washer for a refund. I can spit with more pressure than this washer can produce.”
“No problems with my 2002 Kubota L3010 HST loader tractor. I also own a 2012 Deere 1026R backhoe loader equipped with a belly-mounted deck. It has been back to the dealer twice for out-of-warranty repairs. It not a best buy but isn’t a bad machine.”
“I use my 2012 Deere 1026R loader tractor on 9 acres of lawn, fields and woods and like the ease of attaching and detaching the loader. The auto connect feature designed to attach a belly-mounted mower is nice but very finicky to hook up – it needs some changes. This tractor has adequate power and good safety features. However, parts for it are way too expensive.”
Bill’s impressed with his 2011 Deere 1026R sub compact 4-WD utility tractor. “I use it equipped with a 48-in. drive-over mower deck to cut our 2-acre lawn. It’s like having a lawn mower on steroids. The tractor is equipped with mid and rear 540 rpm pto’s, a front-end loader, and a Cat. 0/I 3-pt. quick hitch. My doctor says not to lift more than 20 lbs. due to my back problems, so this tractor does all the heavy lifting at our ranch.
“The tractor is designed to do multiple tasks and to change quickly between tools and implements. I’ve accumulated or made a lot of attachments for it including a 4-ft. 3-pt. mounted shredder, 3-pt. mounted 55-gal. spray rig, loader bucket, front pallet forks, grapple fork, box blade, weight box, manlift used with forks, landscaping rake, 4-ft. tiller, barrel lift, hydraulic-operated T-post driver, and 8-in. limb lopper.
“This tractor does everything my much bigger Deere 7230 can do, just on a smaller scale. It’s very maneuverable in tight quarters. No problems at all.”
John Deere 2025R tractor
4 Best Buys0 Worst Buys“My 2022 Deere 2025R with a loader is a very good tractor. It’s easy to operate and runs a 54-in. tiller with ease.”
“We purchased a Deere ZTrak Z950R mower with Mulch On Demand. It’s cut our mowing time down from 3 hrs. with a garden tractor to 75 min., and the cut is amazing.
“We also purchased a Deere 2025R tractor with a 2-stage snow blower and radial tires, and we’ve had zero issues with moving all of the snow this winter. Our local Deere dealer always has routine service parts like blades, oil and filters on hand, which is all these Deeres have needed.”
“My best buy has been a 2014 Deere 2025R midsize tractor that I bought new. I mainly use it to move compost around, but it handles anything I put at it. It has a lift bucket, which I’ve used to haul utility poles around the acreage. The backhoe was used to dig 300-ft. long trenches for a waterline and to plant trees. I’ve even used it to lift fully loaded trailers to hook them up. I also have a box blade, and I’ll soon get a 48-in. pull-behind rototiller. Look out gardens, it’s on its way…”
“Our 2016 Deere 2025R tractor is a wonderful workhorse on our 10-acre hobby farm, which had been neglected for a long time. I use the tractor to bush hog an old orchard, clear new pasture, put in a garden, mow grass, blow snow and maintain a 300-ft. driveway. This tractor is versatile, dependable, and easy to service.”
On the negative side, “My 2016 Stihl MS211C chainsaw has caused nothing but trouble. It was in the shop three times for carburetor problems, and an online search showed that others were having similar issues. I finally traded it in for a newer model Stihl.”
John Deere 2210 utility tractor equipped
3 Best Buys1 Worst BuyRoger’s the satisfied owner of a 2003 23 hp, 4-WD hydrostatic drive Deere 2210 utility tractor equipped with a front-end loader. “I use this tractor with a 54-in. front-mounted blade, 60-in. belly mower, 48-in. box blade, post hole digger, 48-in. tiller, and 5-ft. rotary mower. I also had a Curtis cab with heater, windshield wipers and fan installed last winter.
“During the winter I use the tractor to clear snow off my neighbors’ driveways while wearing a short sleeve shirt. The tractor is easy to operate and has a lot of power. People are amazed when they see all the work it can do.
“Pushing snow is a fast and easy job with this tractor, and the wheels rarely spin. I had my tire dealer put windshield wiper fluid in the rear tires for added weight. In winter I replace the blade’s metal scraper with a thick rubber squeegee that I purchased from my Deere dealer. I like it because it doesn’t leave marks on our driveway. This tractor has had no major problems and still has the original battery. I’d recommend it to anyone.”
“My 2005 Deere 2210 tractor equipped with a front-end loader and a rear grader box is a best buy. This little tractor doesn’t know that it’s little. It can do big tractor work and has never failed me. I couldn’t farm without it.”
Nick bought a 2004 Deere 2210 compact tractor for his lawn care business and says it’s his “best buy.” “I used it one time with a brush cutter to mow down heavy brush. This tractor isn’t much bigger than a riding mower, yet it was able to mow down trees up to six inches in diameter. It pulled through mud, rocks and vines and got the job done.”
Larry isn’t satisfied with his 2003 Deere 2210 lawn tractor equipped with a 5-ft. deck. “The problem is the deck won’t stay level after I set the 3-pt. hitch. As a result, every time I back up with an implement the turnbuckles on the 3-pt. bind. I removed the turnbuckles and put chains on the 3-pt., which solved the problem. “
John Deere 2305 tractor
4 Best Buys0 Worst Buys“At first I was well pleased with my 2006 Deere 2305 tractor. It runs good, works hard, and is easy on fuel. But at 295 hrs., the pto clutch went out and it cost more than $3,000 to fix it. After 6 more hours of use, the hydrostatic transmission case cracked in two places, dumping all the oil out. This time the dealer said the repair would cost $7,300.”
“I like my Deere 2305 compact tractor equipped with a front-end loader and 54-in. mower deck. I use the mower to cut four acres of grass and the loader to haul wood and topsoil. I made forks that attach to the loader bucket, which come in handy. It’s a great little tractor.”
Andy’s impressed with his 2008 Deere 2305 compact tractor. “I use this tractor for cutting grass, moving snow, tilling gardens, grading driveways, and so forth. Deere’s rear Quick-Hitch, quick connect front-end loader, and mower deck were all easy to install. This is a well-engineered tractor. The only negative is the paint on the wheels is cracking and the seat is rusting, even though I store the tractor inside a heated garage.”
“My 2006 Deere 2305 loader tractor equipped with a 3-cyl., 24 hp diesel engine and 62-in. mower deck is my best buy. Bewsides mowing and doing bucket work, I also use this tractor to operate my generator with its pto. I built a cab for it so I can use it to plow snow.”
John Deere 2320 compact tractor equipped
3 Best Buys1 Worst Buy“My 2009 Deere 2320 compact tractor equipped with a belly-mounted deck has been trouble-free, except for some rusted oil cooler lines near the front-mounted battery.”
“I’ve owned several Ford F-150 pickups during the last 30 years, and all of them have been trouble-free.
“My 2012 Deere 2320 tractor has been nothing but trouble. The 3-pt. hitch locked up twice, and whenever the engine is idling it sounds like it’s going to fall apart.”
“I’ve got a 2010 Deere 2320 utility tractor that has only about 200 hrs. on it. It’s had more failures than a tree has leaves. The hydraulic pump failed, the steering linkage broke, an upper steering knuckle split in two, bearings in the front wheels went out 4 times, and the torsion bar on the bucket lift arms snapped. In addition, an engine mount on the right side has broken twice, damaging the radiator and fan. Also, there was a transmission leak between the center case housing and main housing. I’ve had it in 3 times to repair this leak, which has still never been corrected.
“The dealer says talk to the company but the company doesn’t respond at all. No respect for the customer.
“I had somewhat similar problems with a 2013 Kubota MX5100. Lots of problems and no one at the company will help. Fuel consumption is extremely high. Just going down our 3/4-mile driveway and back used 5 gal. of diesel fuel. Oil was contaminated from fuel bypass on pistons. The engine would start but if you shut it off when warm, it would not start again for hours. Brakes would lock up and not hold. The loader bucket cutting edge bent inward and the dealer told me not to backblade with it. The pto switches failed and had to be replaced. The rear axle housing leaked between the main housing and the wheel housing. The fuel pump leaks and the engine fan blade vibrates.”
“Our Deere 2320 tractor is okay but has too much plastic on it. Also, there was a mechanical failure on the transaxle at 290 hours but it was eventually repaired under warranty. However, the same problem happened again soon afterward. The dealer denied any responsibility, and Deere refused to help. Both times the failure was due to a housing gasket that was incorrectly installed - once by the factory and once by the dealer. I ended up making the repair myself.”
John Deere 2640 equipped
4 Best Buys0 Worst Buys“It’s a wonderful tractor,” says Lorne about his 1970 Deere 2640 equipped with a diesel engine. “We like it so much we keep it on display in our front yard.”
“It’s a dependable, handy little tractor,” says Dan about his 1977 Deere 2640. “However, it could use a few improvements including a more comfortable seat, easier access to the batteries, water pump, and radiator.”
A 1977 Deere 2640 tractor equipped with a diesel engine and a Deere 146 front-end loader rates as Dwight’s “best buy”. “It’s a reliable tractor that’s nice to operate and is fuel efficient. My maintenance costs have been minimal.”
Lowell Gehrls, Dixon, Iowa: Lowell nominates his 1989 Kubota 5030 front wheel drive tractor equipped with a shutwle transmission and front-end loader as a “best buy”. “It’s fuel efficient, starts at20° below without a plug-in heater, and the loader is easy to get on and off. This tractor replaced my Deere 2640 which started had a clutch that had to be replaced 3 times during 2,600 hours of use,”
John Deere 314 garden tractor
3 Best Buys1 Worst Buy“We found our 1984 Deere 314 garden tractor in a barn a few years ago, and it’s still running great. The Kohler engine has plenty of power, is easy on fuel, doesn’t use oil, and is easy to maintain. We use this tractor to mow 2 acres of grass every 4 to 6 days. Most of the time I can still get parts from my dealer. This tractor is bullet-proof, and I’d buy another one.
“Our 1450 Cub Cadet garden tractor steers hard and doesn’t do a good job of mowing, even with new blades and deck bearings. The wheel spacing on back of the tractor is too narrow, and as a result it just doesn’t cut grass like our Deere. Parts are sometimes hard to find. If our dealer has to order them it takes 2 to 5 days. I plan to sell this tractor and buy another Deere.”
“My 2002 MTD Yard Machine 21-in. push mower is equipped with a 5 hp Tecumseh engine that doesn’t burn oil. I liked it so much I replaced it with a nearly identical 2010 model.
“My 1985 Deere 314 garden tractor looks like heck but it’s still as tough as a bull and always starts.”
Scott Banik, Humble, Texas: Scott's had good luck with his 1991 Chevrolet C350 Silverado pickup equipped with a 454 cu. in, engine, 4-speed transmission, and 4:10 rear end. “It gets 16 mpg running empty and 10 mpg towing a trailer loaded with 200 bales of hay weighing 16,800 lbs, It's a pleasure to drive, runs excellent, and starts well in cold weather, Chevrolet makes a good quality product.” Leander N. Goodwin, Zionsville, Ind.; A 1986 Deere 3 14 riding lawn mower heads Leander’s “worst buy” list. “A bolt broke off on the hydrostatic transmission before the warranty had expired. It was replaced but broke again. Finally after four bolts were replaced, we welded on a new part which solved the problem. The engine won't start in cold weather and leaks oil. I have to add one pint of oil every time use it It steers very hard, I removed the spindles and sanded them and honed the holes, but it didn’t solve the problem. “I’m also unhappy with my 1986 DMI wagon. Itsteered so hard that! had to use the tractor to turn the front wheels. I removed the front spindles and found some washers missing. I sanded the spindles and honed the holes. Now can turn them by hand, but barely. “My Dixon lawn mower starts instantly and is easy to handle. It does a good job.”
Mike Hudson, Eaton, Ohio: “My 1982 Deere 314 lawn mower is a best buy. The hydrostatic drive works greatand the Kohler engine is superior.”
John Deere 336 small square baler
4 Best Buys0 Worst Buys“Three years ago I bought a used Deere 336 small square baler at an auction. As soon as the bidding stopped, a guy who used to work at a local dealership told me I had just bought the best baler Deere ever made. The following summer I discovered he was right. With my old Massey baler I could never get the bale strings tight enough. But this baler makes bales as tight as bricks, so now I can stack bales way up high in our haymow. I wish I had bought this baler 20 years ago.”
“My 1975 Deere 336 small square baler, which I bought used, is my best buy. It combines excellent capacity with low horsepower requirements. Although the pickup on this baler isn’t as wide as on newer machines, it can fit through narrow gate openings and shop doors, etc. I bought the baler when it was just a year old. The first year I made 6,000 bales and every one was tied right.”
Dave has a small hobby farm and says he has purchased a lot of older equipment over the past 25 years that still works well. “One best buy was a Deere 336 baler which I bought used 14 years ago. It continues to make consistently good bales with no problems. I’ve used it to make about 30,000 bales and have had to replace only two shear pins.
“My International Farmall 460 diesel tractor is easy on fuel and equipped with a torque amplifier which makes it an ideal baling tractor. It doesn’t have power steering but is still easy to steer. The only problem is that it’s hard to start. I have to use glow plugs.
“I use my Massey Harris 444 gas tractor as a loader and chore tractor. I added power steering so the tractor is easy to steer even with the loader on it. It’s one of the best starting tractors I’ve ever had and just keeps on running with minimal repairs. The only problem I had was finding a replacement high pressure seal for the Webster electric/hydraulic pump. They seem to be impossible to find. This would be a perfectly good hydraulic pump if it weren’t for problems with a $10 seal.
“I purchased my McCormick Deering WD6 tractor about 20 years ago for $450. Although I use this tractor only to operate a side delivery rake now, it still runs well and has never needed any major repairs. I wonder if the tractors being made today will be running 40 years from now, or will they be in the junk yard?”
Allan Beatty, Richland Center, Wis.: Allen's disappointed with his New Holland 310 baler. “The first year I had to replace bearings and belts, After that, repairs got more expensive. I understand they’ve improved this baler. But for the same money I could have bought a Deere 336 baler and saved myself all the headaches.”
John Deere 348 baler
2 Best Buys2 Worst BuysBrian’s had bad luck with his 1998 Deere 348 baler. “We bought it to replace our Deere 347 baler which had some years on it. We thought the new baler would decrease our downtime, but we were wrong. The first problem was that the company was five months late in delivering the baler. The knotter mechanism didn’t work right and the baler jumped up and down from the start. The front hitch bolt broke after only one year of use, and the bearings came loose on one of the wheels. The filtering screen wasn’t screwed into place in the bale kicker’s oil reserve. The piston for the kicker was destroyed when a fitting broke and went into the piston. The dealer wasn’t very prompt in fixing any of these problems.”
William’s disappointed with his 1996 Deere 348 square baler. “I’ve had nothing but trouble with it since the third day after I bought it. It took more than one year and a lot of headaches to finally get it repaired. We got very little help from the company until we threatened to sue both the dealer and the company. It was finally repaired late last year.” On the “best buy” side, he lists his 1985 Ford TW5 4-WD tractor equipped with a cab, air conditioning, and heater. “It does everything we ask of it and is easy on fuel, easy to handle, and a joy to drive. It has a lot of power and the cab has good visibility.”
“My Deere 348 twine-tie baler has tremendous capacity and is a best buy. I’ve used it to make at least 50,000 bales and it probably hasn’t failed to tie more than 20 of them. I like the multi-luber for the bale knotters.
“My Gehl 2240 swing frame mower is my worst buy. It tends to plug up in heavy hay and doesn’t raise up very high. Also, it doesn’t seem to be built strong. The reel and push bar bent the first day we used it. Our dealer took good care of us, though, and replaced all the defective parts with new ones.”
Barry Stephen, Bowsman, Manitoba: Barry is pleased with his 1989 Deere 348 baler. “This high capacity baler has performed extremely well and is a great knotter. We've used it to custom bale flax straw with no problems.”
John Deere 375
3 Best Buys1 Worst BuyTruman Roberts, Elk Creek, Va.: “It works perfect and does what expected it to,” says Truman about his 1993 Deere 375 round baler. On the “worst buy” side, he lists his 1993 Spreadmaster fertilizer spreader. “The settings on it don't work like they should.”
Donald Sears, Carlisle, Ky.: “The worst buy I ever made was my New Holland 630 round baler that I bought new in 1990, Both outside belts would always run up on top of the inner belts. I changed all the belts and that still didn’t help. Finally, aroller swallowed one of the belts and that was the straw that broke the camel's back. I'd had the machine only five days and had worked on it four of them. So I loaded it up, took it back to the dealer about 35 miles from here, and told him I'd have it fixed or I'd have my money back. He gave me my money back. “The next day, I bought a new Deere 375 baler, which is one of my best buys. It’s been trouble-free, runs quiet, and looks great.”
Ralph Muecke, Gladstone, N. Dak.: Ralph nominates one Deere hay tool as his best buy and another as his worst. “The Deere 375 round baler I bought in 1993 is well-built. It makes good solid bales, the double twine tie does an outstanding job of tying bales, and the machine will bale anything - even Russian thistles. The only problem is it was terribly overpriced. “My worst buy was a Deere 800 swather, in spite of the fact that it worked and cut well. The problem was that there were way too many moving parts, You had to tear the swather nearly half apart in order to change some of the bearings and belts, causing lots of unnecessary downtime. Also, the roller chains were way too light for their application.”
Joseph Yoder, Big Prairie, Ohio: “I'm extremely well pleased with the Deere 375 skid steer loader I bought in 1990. The 3cyl. diesel engine has a tot of power and so far has been trouble-free. The loader is big enough to do a lot of work but small enough to get in just about anywhere. It starts good in cold weather and is easy to operate.” “My electric Shearmaster sheep shearing machine is my worst buy. bought it new in December of 1992. In March, the motor quit and was repaired by the dealer for free. A few months later, the engine went out again and again it was repaired for free by the dealer. I bought a second motor for a spare and it's a good thing did. The motor blew again this fall.”
John Deere 4100 tractor
3 Best Buys1 Worst Buy“My 2002 Deere 4100 with 410 loader is great. I’ve only changed the oil and filter, nothing else. It still has the original battery.
“My 2002 Grasshopper 740K mower has only had oil and filter changes plus a new battery.
“My worst buy was a Craftsman battery-operated drill.”
“I bought my 2000 Deere 4100 tractor used with about 450 hours on it, and now it has 667 hours on it. This tractor has done work I never thought it could do. We raise Alpacas and I use this tractor to dump all the manure just outside the barn, and then every spring I haul it to a compost site. It’s a great little tractor that’s fun to operate. I’ve got to be careful, though, as a heavy bucket load can make the tractor tippy.”
“I haven’t had any problems with my 2000 Deere 4100 loader tractor – all I do is change the battery and filters. The front-end loader is really useful.
“One of my worst buys was a Deere mulcher and leaf bagger that I bought to use with this tractor. It didn’t fit the tractor at all. A Deere dealer kept the bagger for a full month without fixing it. I’ve had the unit three years but haven’t used it once.”
“My 2001 Deere 4100 compact tractor equipped with a 60-in. mower has been used all over southern Maryland for landscaping and plowing snow. It’ll lift anything imaginable with no problems at all. All I have to do is grease it, fill it with fuel, and go.
“My 2003 Dodge Ram 3500 4-WD crew cab pickup equipped with a 24-valve Cummins diesel engine is also a best buy. It has a lot of power and is fuel efficient.”
John Deere 4250 tractor equipped
4 Best Buys0 Worst BuysRonald nominates his Deere 4250 tractor equipped with a 15-speed power shift transmission as his “best buy”. “It’s a super tractor that’s easy to operate and has a lot of power. No problems. “My DMC 2-auger Stirrator is my worst buy. It has had too many problems to list. I can’t leave and have it running for fear of what might happen.”
Bruce nominates his 1983 Deere 4250 tractor as his “best buy”. “The Sound-Gard cab is quiet and comfortable and the engine runs good. It has 4,900 hours on it. I plan to have it overhauled at 5,000 hours. Some teeth have broken on the ring and pinion gear which could be due to operator error although I wonder if anyone else has had this problem. The tractor handles nice but uses more fuel than the Case 1070 that I owned previously. “I modified an Oliver 1610 front-end loader so I could mount it on my Deere 2940 tractor. It’s a light-duty loader so numerous cracks have developed in the frame and loader arms. It has a narrow bucket but that’s not much of a problem because I use a bale fork on it most of the time. It’ll get me by until I can afford a better loader.”
E.F. Jones, Midland, Texas: He’s pleased with his Deere 4250 wactorequipped with mechanical front wheel drive. “It does a good job, is very dependable, and starts easy. However, Deere has ripoff prices on parts. “Our 1986 Volkswagen Jeua diesel car Starts poor even on acool summer day. If the battery gets weak we have to send the radio away to have it reprogrammed. The doors leak water whenever itrains, The headlights costover $120 cach and that doesn’ tinclude labor for the complicated installation, The engine has about 80,000 miles and needs to be overhauled. It gets 60 mpg - when it runs.”
Neil Walter, Oglesby, Texas: Neil’s happy with his 1984 Deere 4250 tractor but says he feels the engine uses too much oil. “It started using a lot of oil at about 9,500 hours and now uses one quart of oil per day at full throttle when pulling a heavy load. I always used Deere oil and changed it exactu on schedule, The 15-speed powershift transmission lets me take advantage of all the engine’s power.”
John Deere 4310 tractor equipped
3 Best Buys1 Worst Buy“I have a list of best buy products that I call my ‘wish I had bought two of them. It includes my 2001 Honda Foreman 4-wheeler, 2003 Deere 4310 tractor equipped with a hydrostatic transmission, 2005 Dodge Ram diesel pickup, 2006 Central Boiler outdoor furnace, and 2006 Jonsered 2150 chainsaw. All of these products get used hard but have required only routine maintenance.”
“I like my 2003 Deere 4310 tractor equipped with a hydrostat transmission. I use it to do commercial mowing with a 6-ft. finish mower around about 20 large hog confinement buildings, plus some other mowing. This tractor is a pleasure to use with the hydrostat transmission, and it’s quite easy on fuel.”
“I like my Deere 4310 tractor equipped with a Deere 430 front-end loader and hydrostatic transmission.”
“My Hustler 52-in. zero turn riding mower has reduced my mowing time by half, from 3 to 1 1/2 hours. It has required only routine maintenance and the replacement of one plastic idler pulley. I bought this mower at a very reasonable price. I’d recommend it to anyone.”
On the negative side, he lists his 2003 Deere 4310 tractor equipped with a Deere 430 front-end loader. “This tractor has terrible hydraulics. The loader doesn’t have adequate lifting power, and both the hoist cylinders and the bucket and forks tend to drift down whenever I’m using the loader. I’m sure the problem is with the valve body, but the company either won’t or can’t fix it. It has been in for service three different times.”
John Deere 4450 MFWD tractor equipped
4 Best Buys0 Worst BuysJohn’s the satisfied owner of a 1986 Deere 4450 MFWD tractor equipped with a Sound Gard cab. “I bought this tractor used for $40,000 in 1990 with about 700 hours on it. At first we used it on our Connecticut farm. Then in 1995 we moved our dairy operation to Utah where we’ve used the tractor to feed 1,600 cows every day. The tractor now has about 42,000 hours on it. A new engine was installed at 25,000 hours, and the transmission was rebuilt at about 35,000 hours. We’ve replaced the water pump, batteries, and starter, but there have been no big problems. so even the 0.2 increase will pay off after 2 to 3 months.
“I plan to keep working at it,” he says, adding that, “Advanced Energy has provided good support when I’ve had questions. However, they didn’t send a promised replacement circuit breaker and amp gauge. If I could get the full 15 percent improvement they talk about, I would become a dealer.”
Ed’s happy with his 1984 Deere 4450 MFWD tractor equipped with a front-end loader. “It has more than 10,000 hours on it but has required very few repairs. It uses hardly any oil and always starts the first time, even in below freezing weather. It’s up to any task in its horsepower range.”
Gordon owns a Deere 4450 MFWD tractor equipped with a powershift transmission and a 1996 Deere 6200 MFWD tractor equipped with a shuttle shift transmission and 640 front-end loader. “Both tractors are quiet and easy to operate and have a lot of power. I like the shuttle shift transmission on the 6200 - it saves time and energy when packing silage and hauling manure.”
John Wolf, Schleswig, Iowa: John says his 1989 Deere 4450 MFWD tractor heads his “best buy” list. “It has good power and _ the front wheel drive works great in loose soil conditions. I also like the power shift transmission for cutting silage.”
John Deere 468 round baler leaked
3 Best Buys1 Worst Buy“The compression cylinders that control bale density on my new Deere 468 round baler leaked, which caused the monitor to tell me to stop baling. I asked a Deere rep to do something about the cylinders. He replied that it was just normal wear and tear and would do nothing.”
“My best buy is a Deere 468 round baler equipped with a silage kit. I’ve used it to make about 2,500 bales with no problems. It replaced a Deere 466 model that also performed well. The monitor on this machine allows me to make solid, square-shouldered bales day after day.”
“After 19 years, our Morton buildings still look like new. Also, our 1991 MacDon 7000 swather cuts and works well in our tough Montana wild hay, but the paint and decals are in terrible shape. Our Deere 468 baler is an excellent baler that makes good bales and never misses tying.”
On the other hand, he doesn’t like his Sears Craftsman power washer. “If we’d known there is no way to drain it, we wouldn’t have bought it. They say you have to store it in a warm place to prevent damage form freezing.”
Malcolm McCracken, Hilton, N.Y.: Malcolm’s “best buy” is his Prasco model 8140 air seeder. “I put drill openers on the rear of a 22-ft. disk which I pull behind the air seeder, I used it to plant 640 acres of winter wheat and 125 acres of alfalfa last fall and it worked super. It even plants in corn stalks without plugging.” On the negative side, Malcolm’s unhappy with his two 1989 Deere 468 string-tie balers. “They didn’t tie properly at first which caused 10 to 20% of the bales to break. The dealer installed sisal twine hooks on them and they now do a passable job of baling. However, these balers aren’t as good as the model 467 wire-tie baler we traded in.”
John Deere 4850 MFWD tractor
2 Best Buys2 Worst BuysA 1985 Deere 4850 MFWD tractor rates as Dale’s “best buy”. “I bought this tractor used with 7,000 hours on it. It doesn’t use any oil and has a lot of power. Also, it’s fairly fuel efficient.
“My 2002 Polaris Magnum 4-wheeler ATV is my worst buy. The electronic module shorted out and was expensive to replace so I traded it and bought a 2004 Polaris 400 Sportsman. I had the same problem. The dealer, however, claimed it rarely happened. It took weeks to get a new module.”
“I don’t think there’s a better combine for the money,” says James about his 1985 Massey Ferguson 850 combine which he bought used when it was a couple years old. “The combine is equipped with a 24-ft. platform which it handles easily. I wouldn’t want a smaller one. I wish I could buy a new combine like this one.”
On the “worst buy” side, he lists his 1988 Deere 4850 MFWD tractor. “The problem is the radiator overheats. The company suggested I try a fan lock-up kit which I did. It helped a little, but not enough. I finally re-cored the radiator with a thicker core. Now the tractor runs a little if the radiator is perfectly clean, but the gauge runs right on the red line. In my opinion, Deere didn’t intend for you to pull this tractor to its capacity. Also, the filler pipe for adding hydraulic oil is at such at an angle that you can’t use a funnel.”
“I bought a 1985 Deere 4850 MFWD tractor three years ago, and it’s my best buy. It’s a great tractor with a quiet cab, and rides nice. I love the powershift transmission. The only thing I had to replace was the dome light switch. It’s the best tractor I’ve ever owned.”
Kathleen and her husband, Jim, are seeing red over problems they’re having with a green tractor.
“We bought a Deere 4850 MFWD tractor new in 1983,” Kathleen says. “It has only 2,096 hours on it now so it’s not as though we’ve been over working it. But last December, the tractor simply quit moving. We hauled it to a local Deere-trained service technician with 20 years experience. He said the clutch and separator plate had gone out, stopping the tractor and breaking the transmission oil lines.
“He was well versed on this situation, having fixed three other early model 4850’s with the same problem. Turns out, a Deere ‘fix as fail’ service bulletin (R 86-50-9) was issued to dealers in August of 1986 identifying this problem.
“We had our tractor fixed at a cost of $3,365 for parts and $621 for labor, and feel that Deere should reimburse us for the parts that the service bulletin seems to suggest are defective. Our service technician says Deere has paid for parts on the three other tractors he’s fixed and agrees with us that this should never have happened to a tractor with so few hours on it.
“However, we’ve spoken with three different Deere officials both in Ohio and company headquarters and we’ve just been getting the run-around, in part, because the tractor’s 15 years old. It’s pretty frustrating since we contend ‘fix as fail’ means exactly what it says regardless of how old the tractor is.”
John Deere 5075E tractor
2 Best Buys2 Worst BuysGlen has two Makita best buys. “My snowblower is about two years old. It has good airspeed but is light to handle.
“My 16-in. electric chainsaw is easy to operate, lightweight and adequately harvests small firewood.”
Glen is disappointed in his 2019 Deere 5075E tractor. “It’s unstable in operation because the wheelbase is too short, making it weighted incorrectly. We’ve added 300 lbs. of weight on each wheel but must use great caution to avoid instability. I wrote to Deere but, of course, received no response. I see many of this style tractor for sale in farm periodicals.”
“My 2021 Deere 5075E utility tractor is the perfect size for my ranch. It’s able to do all that is needed. The cab with a/c, heat and a radio make it comfortable, and the view is good out every window and door. The loader, with its attachments, is very handy and useful.”
Ed hasn’t been as happy with his Honda weed eater (model HHT31S). “It’s had three new carburetors – one under warranty and two more after Honda said it was just underpowered and there was nothing they could do about it. I bought a Husqvarna after that and am very pleased with that one and just bought another Stihl powerhead with weed eater and tiller attachments and am very pleased with them.”
“We bought a new Deere 5075E tractor during the fall of 2013. In October 2015 the tractor had about 1,100 hrs. on it when the fuel tank melted. The dealer said he’d replace the tank if I paid for the labor, which cost me $518 including pickup and delivery. We then installed a piece of Teflon between the new tank and the tractor’s rear housing to keep the same problem from happening again.
“Also, when we drained the transmission oil it had a burnt, ugly smell. My next tractor may possibly be a Kubota.”
“During the fall of 2014 I bought a Deere 5075E tractor equipped with a cab, but after 12 hours the air conditioning line broke at the condenser and a new condenser wasn’t available. The dealer gave me different stories and tried to blame me for the problem. After I made many phone calls and emails to the company, the problem was finally resolved and covered under warranty. Horrible customer service.”
John Deere 510 disc ripper
4 Best Buys0 Worst Buys“My 1998 Deere 726 Soil Finisher makes an excellent seedbed and is a best buy.
“My 1998 Deere 510 disc ripper does a super job of cutting stalks and breaking up hard pan.
“My 1998 Deere 9410 combine is an all-around excellent machine with wonderful operator comfort.”
“My 1982 Massey Ferguson 275 tractor works great and is my best buy. It’s very fuel efficient.
“My 1997 Deere 510 round baler, which I bought used, is also a best buy. It’s easy to pull, makes a good tight bale, and doesn’t require a lot of power. Also, the belts on it are easy to replace. The only problem is that when I start to make a bale the belt sometimes will cross and lock up which causes problems.
“My 1991 Toyota 4-WD pickup, which I bought used three years ago, is a best buy. It has required very little maintenance.”
Mike Bailey, St. John, Wash.; “I bought my 1983 Deere 510 round baler used three years ago and it’s my best buy. Anyone interested in buying a used round baler should check out this model, The sprockets and bearings can be easily removed, and belt tension can be released fast which makes it easy to splice belts. Best of all, bale starting is almost 100% positive. The baler handles hay gently - I’ve baled a lot of hay when the temperature was 95 degrees with little loss. This baler can be bought used at reasonable prices compared to the high cost of new ones.”
Dean Lemenager, Clifton, Il.: Dean says his 1994 Deere 510 disk ripper is his best buy. “It does a wonderful job of burying trash and leveling the seedbed.”
John Deere 5103 tractor
3 Best Buys1 Worst Buy“My Deere 5103 50-hp. tractor is heavy duty and dependable.”
Markham isn’t impressed with his Kubota MX5000 50-hp. tractor. “The fuel tank fills with condensation causing the engine to quit. The connections to the 3-pt. hitch continue to fail.”
“I purchased a Deere 5103 new in 2006. The fenders on the tractor rusted. They had multiple holes larger than 6 in. and the fender brackets were rusted through. The local JD and Corporate would not replace them but would sell me new ones at $1,500 per fender, not installed. I have a couple of Case and Ford 8N tractors, and their fenders are still solid. I finally had to sell the 5103 with 300 hrs. for one-third what I paid new.”
Jack is happy with his Deere 5103 tractor with front end loader. “I have had no problems with it. I only have 367 hrs. on it, mostly to do a lot of odd jobs such as clearing new ground and moving trees that have fallen on fences. It saves a lot of chainsaw work. It’s the best small tractor I’ve ever used.”
Harry nominates his 2007 Deere 5103 tractor as his “worst buy”. “Six months after I bought this tractor the control levers for the rear lift froze up which caused the lift to quit working. The dealer said this problem commonly happens when the lift isn’t used enough. He said an internal valve would have to be replaced at a cost of $800, not including labor. I always store this tractor inside out of the weather. It has about 160 hrs. on it.”
John Deere 5210 sitting
3 Best Buys1 Worst Buy“My 2004 Toyota Tacoma pickup has 221,281 miles on it but all I’ve had to replace is one ball joint and the gas tank. It still has the original rear brakes. It’s starting to rust around the rear fenders but that isn’t a big problem. I’m happy with this pickup and wouldn’t hesitate to buy another one.
“Our 1996 Long 2460 tractor was a piece of junk. No parts for it were available, so a simple O-ring failure could shut the tractor down for a week or longer. The same day that I mailed my last payment in I had a new 1999 Deere 5210 sitting in my yard, and 6,700 hrs. later it’s still going strong. Most of those hours have been spent hauling logs out of the woods.”
Phillip nominates his 2005 Deere Gator as his “best buy”. “My wife was the one who expressed an interest in buying this utility vehicle. We use it almost every day. It has enough power to pull our boat dock up a steep incline and will run forever on a tank of gas. The electric dump bed is worth the extra money.”
On the “worst buy” side, he lists his 1999 Long Farmtrac 60 tractor. “This was the first new tractor I ever bought. The tractor was advertised to be ‘just like a Ford New Holland’ and the specs on it were almost the same. However, I was able to put a total of only 120 hours on this tractor because I had so much trouble with it. The brakes were bad, the hydraulic system leaked, and the fuel gauge was faulty. I did learn how to bleed a diesel fuel system. After one year I traded this tractor in for a Deere 5210, and I’m well pleased with it.”
“My 1997 Dodge 1500 pickup drives great, has a lot of power, and rides beautifully even though it’s a 4-WD model. The cab is quiet and has a great sound system.
“My 1999 Deere 5210 tractor equipped with a cab is my worst buy. The tractor runs just fine, but the quality of the cab is poor. Bolts fall out, doors don’t seal, and I had to replace the hinges and latches. The cab is so noisy I can’t enjoy the radio, and dust sifts into it. The air conditioner can’t keep the cab cool even when the outside temperature is only about 80 degrees. I wrote to the company about the cab and air conditioner problems, but no one replied. I guess once they got my purchase money - about $35,000 - they could care less about customer satisfaction. Too bad Deere doesn’t have more competition.”
“I like my 1998 Deere 5210 tractor. It shifts good and has a lot of power in the field.”
John Deere 5300 tractor
4 Best Buys0 Worst Buys“My 2001 Apple Imac computer is my best buy. It has a G-3 processor with OSX. It works every day without crashing. I’ve used it for 18 months without a single failure, never needing a new driver and never needing to add cards. My Mac is far superior to Windows-based PC’s I’ve used in the past. PC computers cost less but weren’t a bargain because they spent more time in repair shops than on my desk.
“My Deere 5300 tractor is a best buy. My only complaint is with the starter, which is built too light and had to be replaced. Otherwise this tractor has been hard working and reliable. It has about 1,700 hours on it.
“My worst buy was an order I made to J.C. Whitney. The products were okay but for a few months after my order arrived, I would get at least two phone calls a week from the company with special offers. I always refused the offers and told them not to call back, but the calls continued for months. If you order from J.C. Whitney, be sure not to give them your phone number on the order form.”
“This tractor has performed flawlessly both harvesting and hay-feeding,” says Ed, pleased with his 1993 Deere 5300 fitted with a 520 loader. “The tractor and loader seem to be perfectly matched and both are very quick. Plenty of power and comfort make the 5300 a pleasure to operate.”
“Our 1995 Deere 5300 tractor has 500 hours on it and has performed great so far.”
Maudena likes her Kramper low-cost alarm system for driveways (Kramper Enterprises, 498 190th St., Dakota City, Neb. 68731 ph 402 987-3560). It lets you know when somebody drives into your driveway. The buzzer is located in the house and sounds whenever a vehicle drives in or out. Everything you need to install the complete system yourself is included in the basic unit, which sells for $99.50. “We have several buildings on our ranch and live 27 miles from town so it’s important that we don’t miss any visitors or service people. We installed four alarms at different places on our farm, and when I called the company they explained fully how the system works and told us how to set it up so that we could run all four alarms from one line using two systems. The system cost $1,100 less than a locally-made system. Also, it works even in the coldest weather. “Our 1992 Deere 5300 tractor works great except for one thing. At 365 hours a hydraulic shaft quit working which caused the tractor to completely stop. The company replaced the shaft. However, it broke again with less than 1,000 hours on the tractor. We had to pay $785 to get it replaced. The company says no one else has ever had this problem and they don’t know why it happened to us. In both cases, we were using the tractor to do only very light work. We’d like to hear from anyone else who’s had this problem.”
John Deere 5400 tractor
2 Best Buys2 Worst Buys“My 1998 Deere 5400 tractor runs great. It’s a good tractor.”
“My worst buy ever is my Deere 5400 tractor which I bought used in 1996 with 125 hours on it. At 922 hours the B range shaft seized to the pinion shaft, and I couldn’t get the tractor out of gear. A company representative said there were problems with some of these tractors because they weren’t assembled properly at the factory, but wouldn’t recall them because there weren’t enough complaints. My total cost for repairs was $4,450. The company agreed to pay only one fourth of the cost.”
Jack’s “worst buys” are his two 1995 Deere 5400 tractors. “The first one was returned to the factory for evaluation of the transmission only three weeks after I got it and with only 19 hours on it. The hydro reverser transmission went from 10th forward to 9th reverse one day as we returned home from baling hay. The dealer told me he had never heard of anything like that before, but then two days later he told me about another Deere 5400 with the same problem. Both tractors were sent back to the factory for repairs.
“When I asked the dealer how long the repairs would take, he said several months. Parts had to be manufactured in Japan and then shipped to Waterloo. I traded this tractor in on another new 5400 which was delivered in August of 1995. Five minutes after it was off-loaded I noticed the first of many defects. With the engine stopped, the 3-pt. lift arms dropped visibly from full-up to full-down in less than a minute. With the engine running, the lift arms would raise to full height and bounce around. After a few seconds, the lift arms would drop a couple of inches, then bounce back up. When an implement was attached to the 3-pt., the bouncing was bad enough to raise the front wheels off the ground which made steering difficult, especially on hard surfaces.
“With less than 100 hours on the tractor more problems showed up. An air induction hose between the turbocharger and air intake became saturated with oil. The horn won’t blow. The engine produces white smoke up to 1,200 rpm’s whether it’s hot or cold, and it uses about a quart of lube oil every 10 hours. The brakes chatter and clank and both rear axle seals leak. Both ends of the steering cylinder leak, there’s no breather in the front axle, at times I can’t shift into any gear, anti freeze pushes out of the over flow, and the fuel gauge doesn’t work. The link between the third remote valve and lever snapped off at the press fit end.
“This tractor has now spent more hours on back of a truck than it has in my fields. Every time they return the tractor after warranty repair work there are loose and missing nuts and bolts, missing parts, and numerous nicks and scratches in the paint.”
Darrell Rains, Beatrice, Neb.: Darrell's best buy is his 60 hp Deere 5400 tractor equipped with front-wheel-assist and 540 Deere loader. “It’s a handy tractor with plenty of power. With front-wheel-assist it will go where big tractors can’t. We use it every day.”
John Deere 5420 tractor equipped
3 Best Buys1 Worst Buy“I’m well satisfied with my Deere 5420 tractor equipped with a Deere H-240 front-end loader. It has a lot of power and starts and runs great. Handles like a car, has convenient controls, and a good air conditioner and heater. This tractor is a dream to drive. I added an LED light bar on front for better visibility.”
“We bought a used Deere 5420 loader tractor last spring that had a worn-out bucket, so we replaced it with a new HLA 6-ft. bucket. It’s built heavy and we really like it (www.hlaattachments.com; ph 519 291-4162).
John’s disappointed with his 2001 Deere 5420 tractor equipped with a 541 front-end loader. “It has had a defective right front tire and a defective battery; the cab roof leaked because there were no rubber washers around the roof bolts; and I had to replace the radio and antenna. The tractor wouldn’t start and I had to install an electric diesel pump to solve the problem. The pto clutch went out the first time I hooked the tractor up to a bush hog, and diesel fuel ate up the plastic tube between the filler entrance and the fuel tank. With only about 1,200 hrs. on it this tractor is a true lemon.”
Stuart’s the proud owner of a 2002 Chevrolet 1500 pickup. “Before I changed jobs I drove 165 miles round trip to work so I put a lot of miles on it, but all I’ve had to do is change oil and put on new tires. It now has more than 70,000 miles on it.
“Our 2004 Deere 5420 is a great utility tractor. It has a really nice balance between power and size.”
John Deere 566 round baler
2 Best Buys2 Worst BuysLarry says his 1999 Deere 566 round baler is his “worst buy”. “Upon delivery the baler was damaged and was missing a scraper kit, and there were some parts on back order. As of last November, the parts still hadn’t come in. The wrapping mechanism has never worked properly, either. There has been little to no effort from my dealer to correct these problems. It’s hard for me to continue to support Deere or my dealer when the quality of customer service that I received was so poor.”
“It bales all kinds of hay, including heavy double-raked windrows, without any problems,” reports Mark, impressed with his 1998 Deere 566 round baler. “It has never broken down.”
“It cuts clean and saves a lot of time,” says Lenox, satisfied with his 1999 Krone 9-ft. 2-in. disc mower.
On the “worst buy” side, he lists his 1999 Deere 566 baler. “I was very dissatisfied with the company. The baler was shipped with a bad bale diameter sensor and tension cylinder. The company said it was my fault, but the dealer stopped listening to the company and fixed the problem himself.”
Mark’s “best buy” is his Deere 566 round baler. “We’ve used it for two years with no problems. It works great.”
John Deere 567 baler equipped
3 Best Buys1 Worst Buy“It makes good, tight bales that keep their shape and store well,” says Howard about his Deere 567 baler equipped with net wrap. “The net wrap option speeds up baling, conserves fuel, and saves wear and tear on both the baler and tractor. Net-wrapped bales that are stored outdoors also keep much better.”
Paul likes his 2003 Deere 567 round baler. “Over the years I’ve owned other brands of round bal-ers, but I like Deere the best. They’re simple and easy to operate, with few problems. Also, they make the best bales.
“My 1986 Honda Fourtrax 4-wheeler is still a very dependable machine.”
“We have two Deere 567 wheel rakes equipped with rubber teeth. This is the best rake ever built – when it’s properly adjusted, as described in the operator’s manual. You have to put 10 lbs. pressure in the tires and 10 lbs. lift on the springs. I’ve seen some guys put 50 lbs. lift in the springs and then cuss the rake because they’re breaking teeth or bending wheels.
“We also have a Deere 510 round baler that works great for us and is simple to operate.We use two Deere 200 stack movers to haul bales.
“My kids have new-style ATV’s but I have an ‘original’ ATV which I like a lot better. It’s a 4-legged type ATV with a saddle and I can go places the kids can’t go in the woods and on hills.”
Warren Medina, Sauk Rapids, Minn.: Warren’s happy with his Miller Blue Star 2E AC/DC welder. “I can easily adjust it for different heat settings, and the fine amper“Metal on the wheels is too thin. Teeth bent backward, leaving hay in the field.” age control makes it easy to change from thin to thick metal welding. “My worst buy is a Deere 567 wheel rake. The metal on the wheels that the teeth bolt to is too thin, The teeth bend backward, leaving hay in the ficld.”
John Deere 630 mower/conditioner
2 Best Buys2 Worst Buys“In 1973 I bought a Blackhawk basic mechanic’s hand tool set made by New Britain Machine in New Britain, Conn. The company that has made tools for many other companies over the years. I still use the 3/8-in. ratchet nearly every day. Only a couple of the tools have been replaced due to breakage or wear. Quality hand tools may be more expensive up front but they will last forever and are therefore less expensive in the long run. Buying American-made tools is the way to go, if you can find them.
“A used Deere 630 mower/conditioner I bought 4 years ago replaced a Deere 1360 that I had for more than 10 years. The Deere-built cutterbar on this model is extremely well-built and should last forever. Although I think fluted rollers would offer faster dry-down than the impeller model that I have, I’m pleased overall. I can mow over previously cut windrows without dragging any hay, unlike with ‘red machines’ owned by some of my friends, who have also reported the need to replace pto shafts after several seasons. The one thing I don’t like about this machine is the geometry of the drawbar. The offset bend makes left hand turns difficult, even requiring that the machine be partially opened up to the field position when making sharp left hand turns on the road. That makes the hydraulic swing lock-out safety valve useless.
“I have always had good luck with Milwaukee brand corded electric tools. I still use a 7¼-in. circular saw and a 3/8-in. drill that I have had for nearly 30 years. I also have a hammer drill, sawzall, and a ½-in. VSR drill that have given excellent service over the years. I have several of their 18-volt battery drills and they work well, too. The compact batteries last a long time and they charge quickly. How sad, though, that Milwaukee is no longer an American-owned company. At least the tools are still built in the U.S.”
Jay Justice, Chetopa, Kan.: “Our best buy isa Krause 4900 wheel disk. We can go from field to field without having to make any adjustments. No problems. “Our Deere 630 wheel disk is a worst buy. It didn’t work right for 6 to 7 months after we bought it. The rear gangs on the wings hang way too low and dig deep holes. When we raised the wings so they didn’t dig, the disk would ridge in the middle. I never could go from field to field without having to adjust something on the disk. I found out that the frame had never been welded level soeverything was off. Ancighbor had the same problem with his model. Whenever someone asks us what kind of disk to buy, we recommend Krause.”
Thomas Wessman, Albert City, Iowa: Thomas's“best buy" isa Culti- Vision tractor-mounted mirror that gives him “rear vision” without having to turn his head while cultivating (K-K Mfg. Co., Ken Klingler, Rt. 1, Box 186A, New Ulm, Minn. 56073). “Cultivating small crops had always been a back and neck twisting job. Now with the mirror I can see right where the cultivator is without turning around. It lets me set the cultivator closer to the row and drive faster. “My Deere 630 disk is a worst buy. The disk itself works alright, but the wings fold so slow that I can almost eat lunch while they’re moving up or down. The problem is that the 1/4-in, hydraulic hoses for the cyl“The wings fold so slow that I can almost eat lunch while they're moving up or down.” inders are too small.”
Dean Clouse, Murdock, Kan.: A 1991 Deere 630 20-ft. disk equipped with 24-in, blades on 9-in. spacings rates as Dean’s “This machine is a disaster in the hands of an inexperienced operator.” “best buy”. “The twoend blades on the front gangs kept breaking, but the company installed heavier blades to solve the problem. it does a nice job now.”
John Deere 6400 MFWD loader tractor
4 Best Buys0 Worst Buys“A few years ago I bought a used Deere 6400 MFWD loader tractor with about 3,200 hrs. on it. It now has more than 9,000 hrs. It’s an amazing tractor. I don’t know how it could be improved.
“My Vermeer 830 discbine is an amazing machine.
“I’m not impressed with my H&S 8-wheel V-rake.”
“I like my Deere 6400 MFWD tractor equipped with a Power Quad transmission. It has a lot of power, is easy on fuel, and has a comfortable seat. It’s also easy to service.”
He’s satisfied with his 1997 Deere 6400 MFWD tractor equipped with a cab. “I really appreciate the cab in the winter when feeding and in the summer when making hay. The Power-Quad transmission works great.
“I purchased a used 1996 Deere 6400 MFWD tractor with 700 leased hours on it. It has a lot of power and the cab has a good view. It’s a joy to drive.”
John Deere 7410 tractor equipped
4 Best Buys0 Worst BuysKen nominates his 1999 Deere 7410 tractor equipped with a Deere 720 front-end loader as his “best buy”. “This tractor has a Power Quad transmission which allows me to shift from forward to reverse without clutching. It works great for loader work, baling hay, and mowing brush in tight spaces, and other jobs. I only have to clutch when changing between ranges. Another plus is that it has a quiet cab with great visibility. The cab stays cool during summer and warm in winter.
“My 1987 Dodge Ram Charger equipped with a 318 cu. in. V-8 engine was one of my worst buys ever. It had electrical and brake problems from the beginning. The second day I had it, it stalled and the dealer had to send a tow truck to pick it up. This problem continued on and off for the next 10 years. We finally gave up when the dealer said it would cost $1,500 to repair and wouldn’t be guaranteed. The engine worked great and was very dependable. But no more Dodge pickups on my farm.”
“I like my 2001 Deere 7410 tractor. It appears to be everything the company said it was.”
Carroll likes his 1998 Deere 7410 tractor. “It has a lot of power and uses very little fuel. The air conditioner keeps me cool even on 100-degree days without running it on high. The cab is quieter than inside my 1999 Cadillac. Since I wear hearing aids I can hear background noise better than whatever it is that I want to hear. Because the cab is so quiet I can really hear the tractor’s radio well.”
Bennett nominates his 1999 Deere 7410 tractor equipped with front-end loader as his “best buy”. “It’s a good loader tractor. I especially like the transmission gear ranges. I previously owned a Deere 3155 tractor which I Tracy S. Edwards, Pow-liked, too.” ers Lake, N. Dak.: Tracy owns a hydraulically-operated Westfield endgate drill fill auger and says it’s his “best buy”. “The amount of product it‘ll move is unbelievable. All we do is hang it on the truck, hook up the hoses, and put it to work.
“My worst buy is my Deere 1600A 16-ft. mower-conditioner. The orbit drive motor broke out from the frame on the third day I had it. Both sicklebars broke later on that year and both wobble boxes also went out. The company fixed the drive motor assembly, but I had to pay for the sicklebars and wobble boxes.”
John Deere 7600 tractor
3 Best Buys1 Worst BuyDon has had problems with the air conditioning in his 1994 Deere 7600 that he bought new.
“The cold air comes out below your knees in front and the air return is located behind the seat so it keeps your knees nice and cool, but the rest of your body swelters on a hot day. I tell other farmers who’ve complained about the same problem in their 7600’s that they just don’t know how to operate it: On hot days, you’ve got to quit work by noon to keep from roasting.
“I complained about the air conditioning problem right away and the dealer and the company fooled around with it for two years without correcting the situation. So I sued Deere but the judge threw the case out of court.
“The real problem is I’m stuck with the tractor because nobody around here is willing to take it in trade since the air conditioning problem seems to be common in all these tractors.
“In frustration, I put an old ‘swamp’ water cooler off a Minneapolis-Moline tractor on top of the cab just to attract attention to the situation.”
“I’m well satisfied with my 1995 Deere 7600 tractor. It’s been trouble-free so far. It has a lot of power and handles well. My only complaint is that it could be priced lower. I mounted front fenders made by M & DProductson it and am very satisfied with them (Midwest Fender & Supply, Inc., 104 Main St., Schaller, Iowa 51053 ph 712 275-9910).”
Jerrell’s happy with his 1993 Deere 7600 tractor. “We use it to handle 4 by 8-ft. bales and the tractor’s Power Quad transmission lets us shift from forward to reverse without clutching and no jerking. The cab provides a good view and has a comfortable air ride seat. It’s also a good tractor for pto work.”
Francis Burch, Lester Prairie, Minn.: He's happy with his 1993 Deere 7600 dicsel tractor. “I like the roomy cab. Ithas a lot of window area which provides great visibility. The 3-pt. is easy to use, and the tractor is easy to service and refuel. was unhappy with how the transmission shifted al first, but an update kit greatly improved i”
John Deere 7800 MFWD tractor equipped
4 Best Buys0 Worst Buys“Our Deere 7800 MFWD is almost a perfect tractor. It’s easy to handle, rides well, and has power. The cab is roomy and comfortable.
“Our Gleaner R-42 combine is a pleasure to operate. It’s equipped with a Cummins engine that has been trouble-free xcept for an oil leak that was hard to find but easy to fix. The engine does like to use fuel, though.
On the “worst buy” side, he lists his Drill Doctor which is designed to sharpen drill bits. “It doesn’t work for us. We called the company and they were helpful, but even after the bits are sharpened they just won’t cut.”
“After four years of use in rocky soil it has held up exceptionally well,” says Kenneth about his New Idea 5212 disc mower-conditioner. On the “worst buy” side, “My Deere 7800 MFWD tractor equipped with a powershift transmission is the most disgusting piece of equipment I’ve bought in 40 years of farming. Whoever dubbed the transmission as the ‘Jerk-o-matic’ was 100 percent right.”
“My Deere 7800 MFWD tractor has a lot of pulling power and lifting ability. I also like my two 1969 Deere 4020 tractors. The company will have to go a long way before they can top what they built 28 years ago.”
“I’m completely satisfied with my 1994 Deere 7800 MFWD tractor equipped with a 19-speed powershift transmission. I use it winter and summer for both pto and field work. It’s a lot easier to service than the Deere 4450 model that I traded in for it.”
John Deere 820 diesel tractor
4 Best Buys0 Worst Buys“My 2008 Dodge Ram 2500 with a 6.7 Cummins engine is a best buy. I’ve done nothing other than routine maintenance and currently have 369,000 miles.
“The worst product I bought was an Irwin step drill bit. I bought it to drill holes for conduit in my metal building. It stopped drilling after only three holes.
“My Deere 820 diesel 2-cyl. tractor always starts right up and has lots of power.”
“My Toro zero-turn, 62-in. riding mower has about 1,500 hrs. on it and is a fantastic machine. It’s equipped with a Kohler engine that’s also terrific. It mows steep hills with ease.
“My Ford 3910 II 4-WD loader tractor had about 900 hrs. on it when the steering system started leaking. The front part of the tractor housing also leaks and there were problems with the clutch adjustment. Otherwise it’s a good tractor.
“My Deere 820 tractor equipped with a 3-cyl. engine is a well-engineered tractor, but at 2,500 hrs. the steering shaft started leaking.”
“I’m well satisfied with my 1972 Deere 820. It’s a small tractor but it’s big enough for my small acreage. The 3-cyl. diesel engine is economical and powerful and has good hydraulics. It’s also handles nice and is easy to drive. I wish it had arms or handles that would allow the operator to manipulate each of the 3-pt. lift arms independently from the seat to make the 3-pt. easier to hook up. These arms or handles would be in addition to the existing 3-pt. lift controls. I also wish it had an auxiliary handle that would allow the 3-pt. to be operated from the ground.”
“It cuts clean and is easy to adjust,” reports Timothy about his 1996 Deere 820 mower conditioner. “I have hilly land but it holds the hills well.
“My 1996 Dodge W-350 diesel pickup performs well, has a lot of power, and is fuel efficient. My only complaint is that the sheet metal is too thin, which allows the bed to get bent and dented way too easy.”
John Deere 8960 tractor
3 Best Buys1 Worst Buy“One of my worst buys is my 1990 Deere 8960. Deere really ruined a good engine with their specifications for the engine in this tractor. Last spring I replaced the fuel pump with one recalibrated by Schield diesel, Efngham, Ill., and gained 1 mph pulling a 46-ft. cultivator. The only thing I do like about this tractor is the 24-speed transmission. The new Deere tractors with the Penske engines and all the electronics do not impress me. My next tractors are going to be blue.
“I had major problems with my 1992 DMI 46-ft. Tiger mate cultivator with a 5-bar harrow. After hitting a hole in the road during transport, I twisted the center axle, creating a major catastrophe. In 1993, DMI solved the problem on new models by increasing the center axle tube to 5/8-in. thickness. Despite the problem I had with the earlier model, I still think DMI is the best on the market and I have since traded for a Tiger Mate II.
“I have a 2600 Kinze 16-row 31-in. planter that I would like much better if it had White planter units and a decent monitor. White planter units would easily fit in place of the pusher units but would require modification to mount in place of the rear units. Kinze has great ideas on their planter toolbars but sometimes quality control is lacking.
“I use a Bruening Seed Vac (made in Shelbyville, Ind.) to fill the planter from bulk bags. I also use it to clean out the planter and other equipment. It’s a best buy.”
Joel Lust, Marion, Ohio: Joe! likes his 1991 Deere 8960 4-WD tractor. “We haven't had any real problems with it after 1,300 hours. It has a lot of power and drives comfortably. Maintenance is simple and quick, It replaced an International 4586 4-WD tractor and is superior in every measurable way. It was like going from a Subaru to a Cadillac. “My 1990 Sunflower 5331 36-ft. field cultivator is my worst buy. The biggest problem is that we've never been able to get it to work evenly in the ground over the entire width of the implement. One side of the center section sucks down which pulls the other side up. We’ ve tried everything we could think of, including cylinder stop combinations, measurements, adjustments, etc., with no luck. Our dealer gave us a kit to solve the problem but it didn’t help. It must be a design flaw because a neighbor had the same problem, It’s a shame that it won't pull evenly because it’s built heavy.”
Ken Nelson, Herbert, Sask.: “I’m happy with my 1992 Deere 8960 tractor and 1992 Flexi-Coil 5000 air drill. Both companies have always treated us well. “Our Ford-Versatile 276 tractor has high maintenance costs. We've never received any support from the company to try to make it more trouble-free.”
Frank Glenn, Farmer City, Ill.: Frank’s impressed with his “Yazoo 60-in. twin 18 Wisconsin mower, This is our second one and it should last until we retire. “Two years ago I traded our Steiger 310 tractor in for a Deere 8960 equipped with a 24-speed transmission and 18.4 by 42 Firestone tires, The Deere tractor has better fuel economy, more power, no separate drop box, much better hydraulics, better traction without tracking, more useable gears, and a much better cab. However, the
( drain hole for the oil panison the side ofthe pan instead of on the bottom. The hoodon the Steiger was easier toraise andhad more clearance, and the drawbar pin lock was easier to operate. The Deere tractor also has a poor oil fill system. It isn’t as easy to enter the cab, and the dash console is very flimsy. _ “T uraded in a Wilrich 45-ft. field cultivator equipped with a 3-bar International coil tine harrow for a DMI 46-ft. Tigermate equipped with a 5-bar spike tooth harrow and Ultra wing sweeps. The DMI has superior trash clearance and does a better job leveling because ithas more wheels. Itfolds narrow for road travel, but the harrow does tangle sometimes. “This is the third year I’ve used my best buy Deere 7200 12-row, 30-in. wing-fold vacuum planter. I previously owned International 500 and 800 vertical wing fold air planters, I liked the fact that the International planters had just two seed boxes and faster markers. However, the Deere planter places the seed at a more even depth and doesn’t have any boots to wear out. It also has a much better monitor. 1 bought four Trotter soybean boxes that hold 8 bu. apiece to help plant bulk beans (Trotter Mfg., Buffalo, IL)”
John Deere 990 utility tractor
4 Best Buys0 Worst BuysDale likes his 2000 John Deere 990 utility tractor. “It’s been maintenance free. Other than replacing the battery and cables, my only complaint is the filter can be hard to change.”
“I’ve had nothing but good luck with my Deere 990 tractor. Very dependable.
“I’ve owned five Dodge Chrysler vehicles over the years and have really liked all of them. I just bought a new Dodge Ram 1500 pickup.”
“My Deere 990 loader tractor sips fuel – extremely economical to operate. It starts immediately, even after sitting for several weeks in cold weather.”
A 2006 Kawasaki 3010 Mule utility vehicle rates as John’s “best buy”. “It takes the place of a pickup around our horse farm. It has two seats so we can take four people for a Sunday ride in the mountains. The bed provides a place to haul stuff to the field and a place for our dog to ride. We’ve put about 185 hours on this machine with no problems.”
He nominates his 2005 Deere 990 tractor equipped with a front-end loader as his “worst buy”. “This tractor doesn’t have enough hydraulic power, and the fenders started showing rust at about three months. We got no help from the dealer with either problem. Then, when the tractor was two years old, the dealer called and said he had replacement fenders for us. So I guess it takes Deere two years to figure out they really have a problem.”
John Deere F525 front-mount lawn mower
3 Best Buys1 Worst Buy“My Deutz 7206 and 7085 tractors are dependable and easy to operate. They’re also super fuel efficient.
“My Krone 125 round baler is easy to use and makes great bales. It can bale just about anything including wheat straw, bean straw, and corn stalks without missing a beat.
“My Deere F525 front-mount lawn mower is a big disappointment. It looks like a Deere but runs like a John. It was worn out after only one year, even though we use it on less than a half acre of grass. It was difficult and expensive to fix. Three different dealers tried to fix it without success. We finally traded it in.
“My FarmWork computer software was a nightmare to install and technical support from the company was poor. It was a real disappointment.”
“My Deere F525 front-mount mower is easy to operate, requires little maintenance, and has a lot of power. It makes a nice, even cut but could use a differential lock for more traction on hills and wet grass.
“My Black & Decker Snakelight flexible flashlight is my worst buy. The light is flexible so that it can be wrapped around or hung on objects. However, it’s poorly balanced and the neck doesn’t stay bent the way it should. Also, the batteries never seem to last very long.”
Kendall Probst, Northport, Mich.: Kendall's had good luck with his 1992 Deere F-525 lawn mower. “It’s a well-built machine and does a good job around trees, shrubs, etc.”
Justin Zitterich, Dunnell, Minn.: “My 1993 Deere F-525 front-mount mower culs close around trees. It's speedy and leaves a lawn that looks like velvet.”
John Deere Gator 6 x 4
3 Best Buys1 Worst Buy“I bought a 2003 Deere Gator 6 by 4 for my wife to use. I didn’t think we’d use it much, but it turns out to be the handiest machine on our farm. It serves as a truck, tractor, pickup and more.”
“My Deere Gator 6 by 4 equipped with a gas engine is my worst buy. The back cylinder keeps ‘loading up’, causing it to run on only one cylinder. The dealer supposedly followed the factory’s repair suggestions and charged me more than $250, but it wasn’t long before the problem reoccured. We’ve found that the only
“Our 1993 Chevrolet 1500 Silverado pickup is a worst buy. It had only 57,000 miles on it when we got rid of it at a salvage price. The frame that supports the front suspension rusted badly, causing it to break. The transmission had to be rebuilt twice in recent years, and we had to install a complete new exhaust system. GM refused to accept any responsibility for the rusted frame. So much for the company’s slogan. ‘We’ll be there.’
“Our Deere Gator 6 x 4 had only 600 hours on it when we traded it off. Ever since it was new we had problems with the machine’s Kawasaki engine. Gas would leak into the engine oil, and we constantly had fouled spark plugs. Our Deere dealers tried for years to solve the problem but couldn’t, so we traded the Gator for a new Cub Cadet Country 6 x 4. It’s a best buy and is superior to the Gator in every way. It has a perky Honda air-cooled engine which propels the Cadet up hills with ease. We’ll never go back to a Gator.”
“I’m totally satisfied with my Deere Gator 6 by 4 utility vehicle. I use it every day around my farm to do everything from feeding to checking cows and fences. It can haul up to 800 lbs and handle any kind of terrain. It’s easy on fuel. I had a problem with the carburetor when it was new, but the dealer promptly repaired it under warranty.”
John Deere Gator 825i utility vehicle
4 Best Buys0 Worst Buys“Our Deere Gator 825i utility vehicle works great for doing chores around our farm, and my wife and I also like going on joy rides with it.”
“My Deere Gator 825i utility vehicle has plenty of power and a top speed of 44 mph.”
“My 2015 Deere Gator 825i utility vehicle has a lot of power and will easily drive through 1-ft. deep snow. The electric dump on it is very handy. A bearing on the front drive axle had to be replaced after we used the machine to haul heavy logs out of the woods.
“My Stihl MS-311 chainsaw starts easy and is easy to clean. It comes with a great operator’s manual and there are good instructional videos on Youtube.”
“I continue to find new uses around the farm for our 2011 Deere Gator 825i utility vehicle. I built a 10-ft. spray boom for it that mounts on the rear bumper and mounted a 65-gal. barrel in the bed. I use the boom to spray weeds along fence rows and field edges, and also to spray weeds in my CRP acreage.”
John Deere Gators ever
2 Best Buys2 Worst Buys“Deere Gators are great machines, but the seats don’t hold up. I’ve had to replace three sets on the two Gators we use. Why they can’t make a seat that will stay attached to the main body is beyond me.”
“I’ve owned Deere Gators ever since the company introduced them years ago. They’ve always been great machines. But I made a big mistake when I traded for a new 2013 Deere 550XUV Gator. This machine is poorly engineered and should have been painted lemon yellow. At times, shifting the gears is an impossible job. I have to shut the engine off and then jam the gears just to get them to engage.
“The 3 Cub Cadet riding mowers I’ve owned over the years have all been best buys. I’ve also owned 3 Dodge 3/4-ton pickups equipped with Cummins diesel engines that rode great and were fuel efficient. Now I own a Chevrolet 3/4-ton pickup equipped with a Duramax diesel. It doesn’t ride or handle well and isn’t fuel efficient. The best it gets on the highway is 14.6 mpg.”
“My son and I bought two Deere 4500 tractors and they’re both worst buys. The seats on both tractors cracked and came apart from the seat frame, and the plastic engine cover grille and steering instrument housing cracked and fell apart. Also, the shift lever and gears came apart. I got no help from the dealer. The loader bucket on my son’s tractor shakes the entire tractor to the point it pulls the bolts out of the frame. The engine works great, however, as do the hydraulics.
“We both bought Deere Gators, too, and they’re also worst buys. The seats fell apart within a year.”
“We have about 15,000 cattle on our ranch and use 4-wheelers to do all our cattle work. We keep about eight ATVs going every day. The good ones have 12,000 to 14,000 miles on them before we either trade them or junk them. Sometimes we buy up to four ATV’s at a time. There are only two brands that we buy - Po-laris and Honda. I think Polaris is the best for ride, handling, and performance. The boss uses that one. Honda is the best for dependability and durability. The hired hands use those because they can’t tear them up.
“My Dodge 3500 4-WD pickup equipped with a Cummins diesel engine and 5-speed transmission is a best buy. It has a rear end with an 4:11 gear ratio, dual wheels, and an 11,000-lb. gross vehicle rating. We use it to pull cake feeders. We’ve bought six of these pickups in the last eight years. We had been Ford fans for 25 years and wore out at least 20 of them. The Dodge gets 12 mpg compared to 10 mpg for the Fords. We change the oil on them every 2,500 to 3,000 miles. The Dodges ride smoother across pastures and don’t have problems with the glow plugs. They’re also about 75 percent cheaper to maintain, and they come with a 7-year, 70,000-mile warranty. Also, Cummins engines don’t break down.
“Our two Deere Gators are both worst buys. For what they cost these machines aren’t worth a darn.”
John Deere GT275 riding mower equipped
4 Best Buys0 Worst Buys“I like my 2000 Deere GT275 riding mower equipped with a 48-in. deck. It’s equipped with a Kawasaki 17 hp engine which works well with the deck. This mower is stable on slopes, and turns short. It’s hydrostatically-driven with foot controls, which I like. I use it to pull a trailer, spreader, and aerator.”
“My Deere GT275 garden tractor equipped with a 17 hp engine, agricultural tires, and 48-in. deck is my best buy. I use it to mow about six acres, sometimes twice a week. Last year I used it to mow my lawn 32 times. I have to mow fast, sometimes over rough areas and along pond banks, but this machine always does a quality job. I replace the blades and belts every year.”
“I’m happy with my 1996 Deere GT 275 garden tractor. I use a mower deck and a rototiller with it, and both of them have performed flawlessly. No problems at all.”
“I’ve been well pleased with my 1998 Deere GT-275 lawn tractor equipped with a 48-in. mower deck. It starts every time, is quiet, and lets me mow my yard in about half the time that I could using other mowers. The hydrostatic transmission makes it a real pleasure to drive and also saves a lot of time. My only complaint is that the belt tension spring keeps breaking. The problem is that it isn’t built heavy enough.
“I like my 1988 Husqvarna model 44 Rancher chain saw equipped with a 16-in. bar. It has been very dependable.
“My worst buy was my 1995 Chevrolet Caprice Classic car. The front end alignment shims fell out in my driveway when the car had less than 10,000 miles on it, and the seats were terrible. I asked the dealer to order Lumbar seats at my expense but was told that they weren’t available for that model. I traded it for a new Buick Roadmaster, which had lumbar support seats as standard equipment. I’m well satisfied with it.”
John Deere 1560 grain drill
3 Best Buys0 Worst Buys“I bought a 1999 Deere 1560 15-ft. used grain drill last year, and it’s my best buy. It gave me a perfect stand, even in mud. It’s absolutely the best drill I’ve ever owned.”
“My best buy is my 1998 Deere 1560 grain drill. It works great in no-till or conventional tillage. This drill is easy to adjust and places seed at a uniform depth. I like the 50-bu. seed box. No problems.”
“This machine saves time, labor, fuel and soil compaction. I can’t imagine planting with anything else,” says Dave, pleased with his 1999 Deere 1560 no-till drill. “It places seed accurately in everything from conventionally tilled ground to heavy cornstalks, and needs no harrows or other add-on attachments to do the job. The hydraulic system works great and is easy to use.”
John Deere 1600 hydraswing mower conditioner
2 Best Buys1 Worst Buy“My 1999 Deere 925 mower conditioner is my best buy. I especially like the flail conditioner, which can pass objects through without damaging the machine. This machine just mows and mows without problems. It has held up well over thousands of acres.
“My 1966 Deere 4020 tractor is a best buy. It rarely has problems and is worth exactly what I paid for it six years ago.
“My 1999 Deere 6310 tractor is comfortable, quiet, and does a good job of handling our mower and round baler. The power quad transmission lets us work fast in the field. It lets me mow our field 30 minutes quicker than with my 4020, just because of its ability to easily and constantly change gears.
“My 2003 Vermeer 605XL baler makes a good bale and the pickup gets all the hay. However, it has had a lot of problems.
“My 2004 Vermeer WRX rake does a good job and is easy to adjust. However, it’s four real tires, a good paint job, and some better-grade bolts away from being a best buy.
“My Deere 1600 hydraswing mower conditioner never made it through a field without breaking down. The final blow came when we couldn’t get it unhooked from the tractor’s pto shaft, and we ended up having to take the pto shaft out of the tractor.”
Eldon likes the 1979 Ford 3/4-ton pickup. “Back then they still built pickups to last. We bought it for $1,500, then had it rebuilt like new from end to end. For about $6,500 we have a like-new pickup that doesn’t have all the computers and pollution control devices on it. It runs great and pulls a trailer even better. “My 1989 Deere 1600 swather is my worst buy. The crimper sidewalls are built too light. Both sides got bent and cracked. The company told us they knew it was a problem but didn’t offer to help pay for the repair. This swather was built poorly. We have a Mac Don now.”
Steve Durham, Beloit, Kan.: “My 1992 Deere 1600 mower-conditioner is a welldesigned product that's easy to service and adjust. The crimpers and twin augers are a dream. The only time you have to get off the tractor is to clean mud off the sickle.”
John Deere 1600A haybine
1 Best Buy2 Worst Buys“We’re well pleased with our 1999 Knight 8024 Slinger manure spreader. We can control how thick the manure gets spread just by opening or closing the gate. There are no apron chains to break.
“We’re disappointed with our 1996 Deere 1600A haybine. It doesn’t seem to have as much capacity as it should. Also, the roller chain that drives the auger and crimping rollers keeps breaking.”
Bennett nominates his 1999 Deere 7410 tractor equipped with front-end loader as his “best buy”. “It’s a good loader tractor. I especially like the transmission gear ranges. I previously owned a Deere 3155 tractor which I Tracy S. Edwards, Pow-liked, too.” ers Lake, N. Dak.: Tracy owns a hydraulically-operated Westfield endgate drill fill auger and says it’s his “best buy”. “The amount of product it‘ll move is unbelievable. All we do is hang it on the truck, hook up the hoses, and put it to work.
“My worst buy is my Deere 1600A 16-ft. mower-conditioner. The orbit drive motor broke out from the frame on the third day I had it. Both sicklebars broke later on that year and both wobble boxes also went out. The company fixed the drive motor assembly, but I had to pay for the sicklebars and wobble boxes.”
“My 1996 Deere 1600A mower-conditioner handles nice and leaves a uniform swath. No problems so far.”
John Deere 170 lawn mower
2 Best Buys1 Worst Buy“Our 1990 Deere 170 lawn mower works great. Our New Holland 630 4 by 4 round baler is a best buy. Our late model Allis Chalmers D14 is an outstanding tractor.”
“My 1958 International 330 is still running after thousands of hours of use.
“My worst buy is my Deere 170 lawn mower. Three years after I bought it a heat solenoid (a small heat chip) had to be replaced at a cost of $135. After that the mower did not run well. Four years later the transmission went bad which cost me $545. I paid $2,600 for the mower. I could have bought a less expensive mower and replaced it every three or four years.”
Artie Worthington, Ayden, N.C.: Faced with the chore of cutting an acre of lawn, Artie purchased a 1989 Deere 170 geardrive riding mower. “My only maintenance expense in 4 years has been to replace the belt on the deck.”
John Deere 212 lawn tractor
2 Best Buys1 Worst Buy“Our Stihl handheld blower and Stihl string weed trimmers are best buys. We use them in our lawn business 5 days a week and they work great.
“Our 2005 Cub Cadet lawn tractor equipped with a 46-in. mower deck is a worst buy. It’s the only tractor we ever bought new. The compression release broke inside the engine with less than 100 hours on it. The deck belt wouldn’t stay on and when it fell off, often we would accidentally run over it and ruin it. This tractor spent more time in the shop than in our yard. Finally we sold it 2 years ago with less than 200 hours on it. Now we’re using a 1976 Deere 212 lawn tractor, which has had only minor problems.”
Gilbert’s impressed with his 1977 Deere 212 garden tractor equipped with a 47-in. mower deck. “It had an engine overhaul 12 years ago but otherwise has performed flawlessly. I’ve thought about replacing it, but I have yet to find another mower that’s made better.”
James McMillan, Phillipsburg, Mo.: “It's well designed and well-built. No trouble after 800 hours of use,” says James about his 1990 Ford 7710 tractor. James's Deere 212 lawn mower is a “worst buy”. “The pretty green hood was expensive and it sure didn’tmake the mower work any better. It wouldn't cut level, even with anew deck. No mechanic could keep it running for the full five hours it took to mow my yard. I traded it in and bought an 8-year old Grasshopper that mows the same yard in 1 hour and 45 minutes without a bit of trouble. The Grasshopper is the ugliest lawn mower on the market, but the best for satisfaction and dependability.”
John Deere 2210 4-WD compact tractor
3 Best Buys0 Worst Buys“My best buy is a used Deere 2210 4-WD compact tractor with a 54-in. belly mower. It’ll mow real high grass and briars with no trouble, as well as pond dams so steep I have to go up and down. I love the hydrostatic to mow the pond dam and never touch the brake.”
“This little tractor has done everything I’ve asked it to do,” says Edgar, pleased with his 2003 Deere 2210 4-WD tractor equipped with a front-end loader and 54-in. finish mower. “I use the mower to cut five acres of grass, and I use the loader for everything from hauling to digging, moving dirt, grading gravel, and removing snow. It’s a good, all-around tractor.”
“My 2004 Deere 2210 4-WD compact tractor equipped with a 23 hp, 3-cyl. diesel engine is a real workhorse. I bought it equipped with a quick-tach front-end loader and a quick-tach bucket, which comes as standard equipment. All the control levers for it are well placed. This tractor turns as sharp as a garden tractor and will go almost anywhere that a garden tractor will go.”
He says his 1999 Ford F-250 4-WD 3/4-ton pickup equipped with a Power Stroke diesel engine and automatic transmission is his “worst buy”. “It has more than 112,000 miles on it but is a poor excuse for a 3/4-ton truck. I previously owned 1995 and 1996 models equipped with Power Stroke engines and they were built much better. This model has far less power and less load carrying capacity. The only improvement it offers is in ride quality, but it comes at the expense of load capacity.”
John Deere 24T small square baler
3 Best Buys0 Worst Buys“Back in 1965 my grandpa bought a new John Deere 24T small square baler, which he used to feed his dairy cows. I’ve been using the same baler for the last 6 years to make hay for my cattle. I also sell some of the hay, and buyers are amazed at the great bales this old baler makes.”
A 1962 Deere 24T baler rates as Raymond’s “best buy”. “Over the years I’ve used this baler to make thousands and thousands of bales, yet my total repair cost has been less than $150.”
Raymond nominates three “best buys”, including a 1960 Deere 24T small square baler. “It’s baled an awful lot of hay every season with very little expense. In my opinion, it’s one of the best pieces of farm equipment Deere ever made.”
Raymond’s also pleased with his 1996 Dodge Dakota pickup equipped with Magnum 6-cyl. engine. “It’s an all-around good serviceable vehicle, with smooth ride and good gas mileage. I’d recommend one to anyone interested in a smaller pickup.”
His third best buy is a 1995 Hydra-Mac 1300 skid steer loader (Hydra-Mac International, 1110 Pennington Ave., Thief River Falls, Minn. 56701; ph 218 681-7130). “We use it for so many jobs around the farm, it’s impossible to name them all.”
John Deere 2520 riding mower
2 Best Buys1 Worst BuyBrian owns a Deere diesel-powered 4-WD Gator utility vehicle. “No problems. Easy on fuel and tons of power. Can’s say anything bad about it.”
On the negative side, he had trouble with his Deere 2520 riding mower. “The deck is weak. I had to take this machine back to the dealer several times before I finally gave up on fixing it. I wish I had never bought it.”
“It has only 25 hp, but this little beast does it all,” reports Michael about his 2008 Deere 2520 compact tractor. “We use it with a 4-ft. tiller, a 1-bottom moldboard plow, and with a bucket and rear blade to move snow. It’ll bush hog a 4-ft. swath no matter how high the weeds.”
James Rhodes, Dayton, Va.: James installed a 239T (2750) engine in his Deere 2520 tractor to boost horsepower from 60 to 86. “I expected more power, but I didn’t expect the tractor to start well at 15° and to use one fourth less fuel while grinding feed. It’s equipped with power steering, power brakes, differential lock, side console, dual remotes, and power shift. doubt if I'd trade itforanew 85 hp tractor of any colortoday.”
John Deere 2550 tractor equipped
2 Best Buys1 Worst BuyRay’s impressed with his 1985 Deere 2550 tractor equipped with a cab and air conditioning. “No problems. It sure is nice to have a heated cab in the winter and air conditioning in the summer.” On the “worst buy” side, he lists his 1995 GM extended cab pickup. “At 9,000 miles the dealer had to install a new engine because the old one rattled every time it was started. However, that didn’t solve the problem. I was told that I should use a Fram PH-5 oil filter instead of the AC-Delco filter that I was using, but that didn’t solve the problem, either. I’ve found out that others are having the same problem. I think the company should recall these engines.”
Henry Soenneker, Bluffton, Minn.: Henry says his 1984 Deere 2550 tractor equipped with mechanical front wheel drive and a model 245 loader heads his “best buy” list. “It’s very easy on fuel and with mechanical front wheel drive it'll outpull a 100 hp tractor, especially on wet fields, Itmakes a great loader tractor. It starts at -20° without heat or ether.”
Billy Bynum, Cowan, Tenn.: “My 1982 International 3388 2 plus 2 tractor has good power and handles well. However, the repair record isn’t so good. I’ve had to install a new clutch and repair the alternator and power steering pump.” Eric Dixon, Albany, Prince Edward Island: “I've had no problems with my 1987 Deere 2550 tractor.”
John Deere 270 skidsteer loader
2 Best Buys1 Worst Buy“My 2004 Deere 270 skidsteer loader is my worst buy. The engine oil filter was loose and leaking when the dealer delivered the unit, and there was a problem with a hydraulic fitting. The seat belt safety switch failed the first day of use. At 100 hours the left side wheel motor began turning only half as fast as the right side, and it took the dealer eight weeks to solve the problem. When he finally got it fixed the unit was plagued with leaks - hydraulic oil and anti-freeze - because it had been taken apart and put back together so many times. I sold the unit before it was even a year old.”
“My 2000 Deere 270 skid loader is my best buy. It has enough power to lift oak logs up to 16 ft. long by 20 in. in diameter, without tipping the machine.”
Two of Terry’s “best buys” are his 1997 Deere 270 disc mower and his 1997 Deere 752 hay tedder. “The mower doesn’t clog and cuts twice as fast as the Deere 1209 mower-conditioner I used before. The tedder fluffs and dries hay as fast as a conditioner.”
Terry also says he couldn’t do without his Makita cordless driver. “It comes in real handy for fixing feeders and other work in my livestock barns.”
John Deere 2755 tractor
3 Best Buys0 Worst BuysChris is impressed with his 1997 Ford F-150 extended cab pickup equipped with a V-6 engine and automatic transmission. “It rides like a car but works like a truck. It can haul 2,200 lbs. of fertilizer or a 24-ft. travel trailer with no problems. I did have to install overload springs on it.
“My 1993 Deere 2755 tractor has been trouble-free. I use it to pull a mower, baler, forage harvester, and rotovator. I really like the air-conditioned cab.
“My 1996 Massey Ferguson 253 4-WD tractor has 48 pto horsepower and works good for what I use it for. It does have its faults. For example, the levers for the remote hydraulics, pto, 4-WD, and hand brake are all clustered too close together. The driver always has to look down to make sure that he’s grabbing the right lever.”
On the “worst buy” side, he lists his 1994 GM 1/2-ton pickup equipped with a V-6 engine. “Parts fell off, the body rattled, and it had a terrible seat. If I drove it any more than two hours at a time, when I got out of the cab I would walk like I was 90 years old. I finally traded it in two years ago for a new Ford F-150 pickup. It works great. There’s no comparison between the two.”
Ken Turbett, Winnipeg, Manitoba: Ken's “best buy” is his 1992 Deere 2755 tractor equipped with mechanical front wheel drive, “Starts well in cold weather, is maneuverable, has good power, and is an all-around good machine. One major problem, though, is that this tractor, as well as its predecessors, is so noisy thatear plugs should be offered as standard equipment.”
Wayne Arnold, Gansevoort, N.Y.: Wayne has had good luck with his 1988 Deere 2755 tractor equipped with MFWD and a model 1245 loader. “We use it to load wagons out of our bunker silo. The front wheel drive provides great traction. It also allows us to tum at the end of the field without braking.”
John Deere 2755 4-WD tractor equipped
3 Best Buys0 Worst BuysA Deere 2755 4-WD tractor equipped with a model 245 front-end loader rates as Skip’s “best buy”. “I use this tractor all year long and it always runs great. It’s easy on fuel and the heating and air conditioning systems work fine. I use this tractor to bale about 5,000 bales a year and to plow snow during the winter.”
The only problem Bob’s had with his 1991 Deere 2755 4-WD is with bad seals in the steering column. “My last tractor was a Deere 3130 and it had the same type of problem. My dealer fixed them both.”
Otherwise, Bob’s “real happy” with the tractor. “I farm some real wet land and have only got stuck once.”
William Bok, Defiance, Ohio: “My best buy is my 1992 Deere 2755 4-WD tractor equipped with a cab, It runs great. “My Deere Max-Emerge II planter is my worst buy. We had trouble with the vacuum system, but the dealer solved the problem. Also, the fertilizer boxes weren’t set up right.”
John Deere 2840 tractor
2 Best Buys1 Worst Buy“Our ‘best buy’ is the Case IH 7210 we bought 19 years ago. It handles nice, has plenty of power, and upkeep has been very minimal. We are very pleased with this tractor.
“Our ‘worst buy’ was a John Deere 2840. That poor thing couldn’t even get out of its own way for lack of power. Something was always leaking and the high-low shift went out a couple of times. We finally traded it in. The day they hauled off that thing, I said, ‘The curse hath been removed!’”
“My 1979 Deere 2840 tractor always starts, has a lot of power, and is easy on fuel. However, the brakes push down hard.”
“My 1979 Deere 2840 tractor always starts right up and has a lot of power. However, it has a hard brake pedal caused by a lack of vacuum pressure, which I understand is a common complaint with this tractor.
“When I bought my used 1991 Deere 2955 tractor, both the pto and high-low clutch needed repair work so I rebuilt them. The pto now works fine, but the clutch still slips whenever the hydraulic oil is warm.”
John Deere 2940 tractor
2 Best Buys1 Worst BuyMarvin likes his 1983 Deere 2940 tractor, but says he had a problem with hydraulic O-rings located by the steering wheel and behind the gauges. “I installed a roll guard and added an exit step on the right side of the tractor.”
Alex Thomson, Vo Ag director,
Gary Steckelberg, Nickerson, Neb.: Gary nominates his 1991 Case-IH 5130 Maxxum tractor equipped with front wheel drive assist as his “best buy”. “It always starts in cold weather and has a great cab with good all-around visibility. However, wish the remote hydraulic controls were clustered together. “My 1982 Deere 2940 tractor is my worst buy. It wouldn’t start after the temperature dropped to only 20 degrees. tried a new starter, arebuilt starter, a new-design starter, and then rewired the electrical system and cleaned all ground connections but nothing helped. Finally I sold the tractor with about 2,500 hours on it. [heard the new owneralso replaced the starter.”
Orville Mishler, Scotts, Mich.: Orville bought a used 1981 Deere 2940 tractor equipped with mechanical front wheel drive and says it “does everything an 80 hp tractor should do. It's fuel efficient and a pleasure to drive. “My 1988 Oldsmobile is another best buy. Itrides and handles well and gets good mileage.”
John Deere 2950 tractor
2 Best Buys1 Worst Buy“My 1984 Deere 2950 tractor, which was made in Germany, is my best buy. We use it during the winter to haul bales to our cattle. It never fails to start. It has about 7,500 hours but still uses very little oil. The only negative is that my son Don services the tractor and says some things are harder to get at than they are on an American-built tractor. For example, the fuel and oil filters. Also, the hood has to be removed in order to get at the air conditioning unit.”
Albert Larsen, Edgar, Wis.: Albert's disappointed with his Deutz-Allis DX 90 tractor. “Ithad less than 500 hours when one of the pistons got scorched. The mechanic that worked on it tried to get the company to pay for the repairs, but they refused. Since then the engine has been overhauled three more times for the same problem. The tractor still has less than 5,000 hours on it. Every overhaul was at my expense - the company refuses to admit there’s a problem. “My Deere 2950 tractor is my best buy. Works great.”
Donald Maciej, Bowlus, Minn.: His Stihl 038 chain saw “starts easy, cuts fast, and is lightweight for easy handling. “My Deere 2950 tractor has poor hydraulic pressure at low engine rpm's which causes loss of power steering and other hydraulic functions. It also shifts hard, but the dealer said there's nothing wrong even after I broke off the shift lever, Otherwise the tractor is everything I expected when purchased it.”
John Deere 3038 loader tractor
3 Best Buys0 Worst BuysA 2015 Deere 3038 loader tractor rates as Russell’s “best buy”. “This tractor is like a hired hand to me. I use it to do mowing, grading, loading, and tillage work. It’s easy to maneuver in the woods, and the grapple bucket on the loader works fantastic.”
“We use our 2013 Deere 3038 utility loader tractor on our 30-acre farmstead to haul wood, mow pastures, and grade our driveway. It’s fairly fuel efficient and has front wheel drive so it works well for logging work. It’s a great tractor for small farms and woodlot chores. It replaced a 1952 Ford 8N that was still in running condition when we parked it.”
“My 2009 Deere 3038 loader tractor has a lot of power and is easy on fuel. I use it to push brush into piles and to do many different jobs around our farm. It’s easy to drive.”
John Deere 328 square baler
2 Best Buys1 Worst BuyWes likes his Deere 328 square baler. “This baler has been exceptional. It rarely misses tieing a bale - hasn’t missed one in more than 1,000 bales. Also, the bales are of uniform size and stack well on my New Holland 1033 bale wagon.
“My Deere 926 disc mower conditioner cuts and conditions great and is easy to hook up and also to service.”
Jason Starnes, Salisbury, N.C.: “It makes the best bales I've ever seen,” says Jason, owner of a 1993 Deere 328 baler. “Bale shape, size, and density stay the same regardless of windrow size. The baler’s wide pickup makes iteasy to getall the crop. It runs quiet and smooth and is easy to service. It’s also easy to clean up at the end of the season.”
John Suhar, Kinsman, Ohio: “ John’s unhappy with his Deere 328 baler. “At first it wouldn’t tie at all, The dealer worked on il several times, but it still misses a lot of ties. Deere changed the knotter on this baler for the worse. They should've left a good knotter alone. My old 336 baler worked much better.”
John Deere 3520 compact tractor equipped
3 Best Buys0 Worst Buys“I own a 2012 Deere 3520 compact tractor equipped with a front-end loader, rear-mounted blade, 72-in. mower deck, and weight box. I also use a Deere snowblower with it. This tractor is easy to maneuver and has a lot of power for its size. It has no trouble handling any of the equipment. I’d recommend it to anyone.”
Nikki’s the satisfied owner of a Deere 3520 tractor equipped with a front-end loader. “I’m 76 years old and the loader has saved me and my 39-year-old daughter a lot of back aches. The tractor is powered by a diesel engine that always starts, even during the winter. The post hole attachment we use makes putting in fence posts an easy job.”
“My 2007 Deere 3520 tractor is equipped with a frontend loader. The first time I used it was to move 18-in. dia., 10-ft. long logs with forks installed on the loader. It performed great and I never had to leave the cab. It has been a dream machine, and at 62 years of age I need all the ease of operation I can get. It’s powered by a turbocharged diesel engine that doesn’t know when to quit. Before I bought this tractor I looked at other brands, but this model has a more user friendly cab, great visibility, and controls that are easy to reach.”
John Deere 3720 loader tractor
2 Best Buys1 Worst Buy“My Deere 3720 loader tractor always starts and can lift up to 1,000 lbs. It’s my main hay raking tractor.”
“My Deere 3720 compact tractor is easy on fuel. No problems.
“My Bobcat 450 tractor runs hot whenever it’s working hard in 85 to 90 degree weather. I’d like to know if anyone else has had heating problems with this tractor, and what they did about it. Also, the cab is noisy and I don’t like the way the pto hooks up.”
“After 20 years of waiting, I finally got a chance to purchase the tractor of my dreams - a 2008 Deere 3720 with cab. Unfortunately, this tractor has turned into a nightmare for me. The tractor is so unstable that I feel it’s dangerous to use. When I first used the tractor, I was bounced around inside the cab so badly that I hit the door handles.
“I bought the tractor last July, but as of January I had put only 19 hours on it. I’ve written letters to the company and also lodged a complaint with the Better Business Bureau. But so far there has been no response from Deere.”
John Deere 40 tractor
3 Best Buys0 Worst Buys“I like my Deere 40 series tractors which include a 4840, 4640, 4440, and 4040. They’re all tough tractors.
“I bought replacement feederhouse chain and sprockets for my Deere 6620 combine from Abilene Machine, LLC. However, the chain kept jumping off because the sprockets were off a half-tooth. I called the company but didn’t get any help. New sprockets from Deere solved the problem.”
Michael likes his 1953 Deere 40 tractor. “I bought it seven years ago with 1,960 hours says Sam about his 2000 Zetor 6341 4-WD Super tractor equipped with a quick-tach front-end loader. “It has a smooth-operating shuttle shift transmission that makes the loader a pleasure to use. I like the loader, too. It’s built strong.”
Michael likes his 1953 Deere 40 tractor. “I bought it in 1994 with 1,960 hours on the meter. It has been very economical and a pleasure to operate on my small acreage. It has a touch-a-matic 3-pt. hitch that works great with all my Cat. I implements. I haven’t had any problems with this tractor and it’s easy to operate. Considering it’s a 1953 model, I think it’s amazing it has a state-of-the-art 3-pt. hitch.
If I were in the market for a new tractor, I’d buy a Deere 4300 with a 430 front-end loader. I think it would be a perfect all-around tractor for my small acreage. It has all the user-friendly options I like to see in a small tractor.”
John Deere 400 rotary hoe
3 Best Buys0 Worst Buys“Last spring I bought a used 3-pt. mounted, 15-ft. Deere 400 rotary hoe because I wanted to add new life to my old meadows. I pulled it over all our pasture ground as early in the spring as possible. I was impressed with the results – more and better quality hay. I plan to use this machine again and again. It breaks up the soil crust and makes holes so air and water can get through to the roots of old hay.”
“After 32 years it’s still going strong,” reports Brenden about his 1980 Deere 400 garden tractor. He restored the tractor and added a 60-in. mower deck. “I use this tractor to mow 3 acres every week. It’s well-built and has power steering and a 3-pt. hitch. No other garden tractor brand is built this well.”
On the “worst buy” side, “Tools and manufactured goods made in China aren’t worth taking home, no matter how cheap. All have a shortcut taken somewhere on material or design, or they’re a poor imitation of something made here. China has no respect for patents.”
“I bought my 1973 Deere 400 garden tractor used in 1975 and have only had to change one fuel pump and one tire in all that time. I use a 60-in. mower with it and also a rototiller. It does a better job of rototilling than any other garden tractor I’ve used.”
John Deere 4020D tractor
3 Best Buys0 Worst Buys“I bought a 1969 John Deere 4020D used in 1974 and nothing ever goes wrong with it. No major repairs in nearly 50 years. I use it every day, and have never overhauled it. I don’t think new tractors will last this long.
“However, my 2010 Ford F-250 got to 30,000 miles and the exhaust converters failed. Ford attempted to replace them but I ended up having the truck towed from their garage. The entire front end needs to come off because something is wrong with the timing. I have purchased the shop manuals and special tools and will fix it myself. Disappointing as I have had Fords my whole life.”
Robert bought his 1968 Deere 4020D new. “It’s been a really nice handling tractor for all those years. It’s big enough to do a lot of heavy work but still easy to use for light work.”
Dean Easton, Remsen, Iowa: Dean's had good luck with his 1991 Yetter 3730 folding ridge till 30-ft. rotary hoe. “It’s wide enough to cover a lot of acres, but light enough that our Deere 4020D tractor can safely lift it. It’s aggressive enough to kill weeds without hurting our crops and rarely plugs up in heavy crop residue. We were able to reduce herbicides and still get the best weed control we've had in years. “My 1990 Case-IH 1660 Axial Flow combine isa best buy. It has lots of capacity, runs smooth, and threshes with little damage. Ithas had few problems and works well with our Deere 643 corn head and Deere 653A row crop head which we mount using a Bish header adapter (Harv’s Farm Supply, Giltner, Neb.). Makes harvest fun. “My worst buy is my 1991 Yetter no-till cultivator. It has four discs per row unit. The problem is that the row units aren’t strong enough for no till or ridge tll. To the company’s credit, they did take my cultivator back. It’s an excellent cultivator for minimum tillage, but shouldn't be sold as a no-till or ridge till cultivator.”
John Deere 4050 diesel tractor
3 Best Buys0 Worst Buys“I like my 1987 Deere 4050 diesel tractor. This tractor is easy to get in, has a lot of pulling power, and requires minimal maintenance.
“My Zimmatic center pivot irrigation system works okay. However, it has been so dry here that we have to run it a lot just to keep the ground soaked. With the high cost of fuel it gets very expensive to even raise a half-circle of wheat for feed.”
Jim Eller, Sun River, Mt: A used Deere 4050 tractor equipped with a 158 loader and grapple fork is Jim's “best buy”, “It’s as reliable and efficient as a 4020 but with less noise. The quad range isn’t as efficient as the powershift transmission, but it’s dependable. The tractor is easy to work on and the turbocharged engine has a lot of power and starts well in cold weather. The cab is quiet and well designed with easyto-operate controls.” On the negative side, Jim lists his 1995 Case-TH 1594 front wheel assist tractor equipped with a Case-IH loader, “From the first day we had trouble with the hydraulics, and the tractor is an absolute pain to service. The cab is designed poorly - controls are hard to get at. It doesn’t start reliably in cold weather even though it’s in the shed and plugged in 24 hours a day. However, it is fuel efficient and I like the front wheel assist. Dealer and company support has been marginal.”
Allen Voortman, Granger, Wash.: A 1984 Deere 4050 MFWD tractor, equipped with a Westendorf WL64 loader, rates as Allen’s “best buy”. “It’s an excellent tractor. We have 9,000 hours on itand wouldn’t trade it for any new model. I really like the 15-speed powershift transmission. The loader has held up well except for the mounting brackets, which we had to rebuild.” On the “worst buy” side, Allen's had trouble with his 1990 Ford F-250 pickup equipped with a 7.3-liter diesel. “The transmission has had all kinds of problems and the brakes failed twice. The fuel pump and glow plugs had to be replaced and the igni- tion switch failed. The hinge on the driver’s side door broke, and the seat is already showing wear. All the paint has peeled off the hood and now the paint on the roof and sides is also starting to peel off. The pickup has only 50,000 miles on it, I'd like to trade itin for a new Dodge.”
John Deere 4055 tractor
3 Best Buys0 Worst BuysHugh J. Moser, Jefferson City, Tenn.: “Our 1991 Deere 4055 tractor is troublefree and uses less diesel fuel than any other tractor we’ ve ever owned, It started right up all winter without preheat or ether. “My 1993 Deere 9400 combine is a best buy. Last year I used it to harvest over 800 acres of corn and wheat without one minute of down time.”
Duane Becktold, Blanket, Texas: “My 1992 Deere 4055 and 1991 Case-IH 7120 mfwd tractors are both best buys. Both are fuel efficient and handle well. Both have about 500 hours on them with few problems. It took longer to seat the valves on the Deere, but the dealer took care of the problem.”
Tom Ewing, Olathe, Kan.: Tom’s pleased with the ease of operation and performance of his 1990 Case-IH 1620 combine. “Two pulleys and a cleaning auger drive shaft broke but were covered by the warranty. “My 1989 Deere 4055 tractor is a pleasure to drive. I purchased it equipped with a Westendorf loader which also works well. “T’'ve had some problems with a Bush Hog 9-f1. disc mower that I bought new in 1990. A hub on the belt drive pulley broke. It was covered by the warranty, but I had to wait three weeks for parts.”
John Deere 4066R tractor built
2 Best Buys1 Worst Buy“My worst purchase is a 2021 Deere 4066R tractor built in 2021. Since I’ve had it, it’s spent more time at the dealer than at my house. The minute I use it, it wants to fall apart. It’s crazy to pay that kind of money and then not be able to use it.”
“Our 2016 Deere 4066R compact tractor is easy to drive, has a short turning radius, good hydraulics, and a comfortable ride.
“Our Deere 755, 855, and 955 are great little tractors. We’ve put thousands of hours on them with only a few minor problems.”
Alan’s the satisfied owner of a 2015 Deere 4066 R tractor, which he uses with an Erskine 725 front-mounted snowblower and a Land Pride 3-pt. mounted, 8-ft. blade. “This tractor has good comfort and visibility and a short turning radius, which works great for snow removal.
“We’ve used Echo power equipment including chainsaws, backpack blowers, and string trimmers for many years. All have required only routine maintenance.”
John Deere 4120 compact tractor
3 Best Buys0 Worst Buys“My 2008 Deere 4120 compact tractor is easy on fuel, starts good, and is generally reliable. By making a small fuel adjustment and adding a higher performance turbocharger, I was able to boost engine horsepower up to 70. I’d recommend this tractor to anyone.”
“It’s a nice, small tractor for doing light yard chores but also has a lot of power,” says Eugene about his 2005 Deere 4120 compact 4-WD loader tractor. “I use it to mow hay with my MoCo 926 discbine and to handle big round bales, with no problems. It has about 2,300 hrs. on it.
“The Deere 2940 4-WD loader tractor I bought used developed internal hydraulic leaks soon after I bought it. It was in the shop several times but never got totally fixed. I paid $16,500 for it and spent $7,000 to $8,000 on repairs. I sold the tractor a few months later for $13,500 and was glad to see it go.”
“We do a lot of small-lot logging on our land, so I bought a Homelite 22-in. chainsaw at Home Depot. It cost only about $200 so I should have known better. After less than one day, it had essentially burned up and wouldn’t run. The brake was locked and it smelled like burning plastic. The local service rep said the saw wasn’t worth repairing so I tossed it on the junk heap. Then I bought my first Stihl chainsaw, and now I own three – 14, 16, and 22-in. models – and they’re all best buys. They start easy, run strong, and are easy to maintain. After two years of use, they aren’t even slowing down at all. I do wish they’d improve the gas and oil caps on these saws, as they’re hard to get tight at times.
“My 2010 Deere 4120 loader tractor is a great machine. I had a Deere 3320 before that was always lugging down and I kept wishing for a bigger machine. The 4120 has plenty of power and a comfortable ride. It’s simply a great tractor.”
John Deere 420 loader tractor
3 Best Buys0 Worst BuysRonald’s “best buy” is the 1956 Deere 420 loader tractor he bought used in the mid 1970’s. “I updated the tractor to a 12-volt system, and over the years I’ve replaced the rims on both rear wheels as well as a broken main shaft. I also rebuilt the steering box.
“This tractor has been worked hard and put away wet. I use it to do most of my haying work. It has worn out a set of ring chains, and I had to rebuild the loader bucket after both front corners on it broke. Otherwise, this tractor just keeps on going.”
“Our Deere 420 lawn tractor equipped with a 60-in. mower deck is a best buy. We bought it used seven years ago with 508 hours on it and use it to mow about 1 1/2 acres per week. It makes our lawn look like a carpet and has required only routine maintenance. It’s a great buy.
“The tractor came equipped with a 3-pt. hitch so I used 12-in. steel wheels to build a barbed wire spool that slides on and off to string out the wire. It really came in handy after a wind storm forced us to replace about 75 percent of our fences. I was able to string out the wire by myself.”
“I’m impressed with my 1951 Ferguson TO 30 and my 1962 Deere 420. If today’s tractors worked as good as these two older ones I don’t guess there’d be much repeat business. I rebuilt the Ferguson in 1973 and
installed a new clutch in the Deere last
year.”
John Deere 4200 utility/cutter tractor
3 Best Buys0 Worst Buys“My 2000 Deere 4200 utility/cutter tractor can mow the grass quickly and efficiently. I made a 3-pt. ball hitch to move/haul utility trailers around the property. I love the tractor. One day Deere will figure out how to make a lasting seat and better plastic hoods. They break at the mounting points.
“My Echo straight bar weed wacker starts hard and won’t idle.”
C.W. likes his Deere 4200 compact utility tractor with Yanmar 3-cyl. diesel with manual 4-WD and 3-pt. “The tractor has a Deere 420 quick-tach loader and 60-in. front-mount snowblower. It has an add-on Curtis cab with heater. This is a great tractor, easy to maintain, runs great, and I have had no trouble with it. I use it a lot.”
“It’s one of the most enjoyable tractors I’ve ever driven,” says Gerald, pleased with his 2001 Deere 4200 tractor equipped with a front-end loader. “The diesel engine is responsive and the hydraulics are efficient. This tractor is also fuel efficient.”
John Deere 4300 medium frame compact
3 Best Buys0 Worst Buys“I have several best buys. I received two ‘headlamps’ as Christmas gifts last year. I never thought that such a simple item could be so useful when working in poor light conditions such as under machinery, in cellars, or even outside after dark. I don’t use them every day, but they sure are handy when needed. I recommend getting one or two.
“A Deere 4110 small frame compact tractor that we purchased from my father-in-law’s estate has been truly outstanding. Although the 410 loader doesn’t have a high lift height, it’s become a favorite machine for light-duty rotary mowing and other barnyard chores. The two-range hydrostatic transmission works well, and the fuel consumption can be measured in quarts per hour. It’s not a big tractor, but it can do a lot of work.
“My well-used Deere 5300 2-WD tractor purchased with more than 2,600 hrs. on it has been a money maker for us. It’s used primarily for raking, tedding, spreading fertilizer, rotary mowing, and general yard work. We haven’t had any repairs beyond yearly maintenance other than replacing some linkage on the hydraulic SCV valves. The 12 by 12 reversing transmission with a positive park-lock provides plenty of speed selection and fuel economy is excellent. I think later models have a slightly redesigned operator’s platform that provides more room for the operator as this one is somewhat on the tight side. It’s simple, effective, and has no computers.
“For package quantities of specialized fasteners, I’ve found that McMaster-Carr is the place to go (www.mcmaster.com). An excellent website makes it easy to select the product you need. They offer a tremendous variety of industrial supplies.
“For more common fasteners such as bolts, nuts, etc., I use The Nutty Company based out of Milford, Conn. (www.nutty.com; ph 800-468-8891).
“Unfortunately, I do have a worst buy as well. Although I enjoy its size, capability, excellent cold weather starting, and fuel economy, my Deere 4300 medium frame compact with a 430 loader equipped with the 12 by 12 mechanical reversing transmission has had many issues with the transmission/clutch design. I thought that a gear drive machine would be better for occasional field use such as raking or tedding, but it hasn’t worked out that way. The ratios of the transmission have too much overlap and no matter which of the three ranges you select, there is often no gear available to provide a suitable speed. Although the mechanical reverser may work well in design, we’ve had a dealer do major clutch adjustments twice (which requires splitting the tractor and is extremely difficult to do) which did not last. A third disassembly in our shop revealed a failing reverse shaft bearing which caused excessive end-play in the transmission shaft which affected clutch adjustment. Next time, I’ll try the hydrostatic version of this size machine. I like the extremely strong 430 loader and the fact that most of our loader attachments can be shared with a smaller 4110 tractor and a larger 5425 tractor but there has been too much downtime.”
He’s the satisfied owner of a 2001 Deere 4300 hydrostatic drive tractor equipped with a Deere 430 front-end loader. “This tractor always starts right up, is easy to operate, and doesn’t use any oil. It’s also easy on fuel.”
“I like my Deere 4300 tractor equipped with a backhoe attachment. It works perfect for digging out stumps and brush and for digging water lines.”
John Deere 4400 tractor equipped
2 Best Buys1 Worst Buy“It has plenty of power, is easy to drive, and starts good in cold weather,” says Dennis about his “best buy” 1984 International 5088 tractor. “It has about 4,600 hours on it.
“My 1975 Allis Chalmers 7000 tractor has plenty of power and is a best buy.
“My 2001 Deere 4400 tractor, equipped with a model 430 front-end loader, is my worst buy. It has about 1,200 hours on it. I’ve had trouble with the sync reverser and transmission slipping out of gear ever since it was new. It has been back to the dealer three times. The last time it was back they told me the linkage was worn out. I expected a better product from Deere and will be looking at other brands when it’s time to trade.”
“It’s just an all-around handy little tractor,” says Dean, pleased with his 2000 Deere 4400 compact utility tractor equipped with a hydrostatic transmission, front-end loader, and backhoe. “I was reluctant to get the hydrostatic transmission, but my two sons talked me into it and I’m sure glad they did. I can move dirt or snow so fast that passersby often stop just to watch. My only complaint is the loader’s control lever isn’t well located. I think this problem has been taken care of on the company’s newer models.”
David Williams, Croton, Ontario: “I’ve owned two Deere 4400 combines and found them to be reliable and cost efficient. Ican’t figure out why Deere stopped making them. “My Massey 33 grain drill is my worst buy. Under certain conditions I might as well use a hoe and string to plant.”
John Deere 4500 tractor
2 Best Buys2 Worst Buys“Overall, my Deere 4500 is a good tractor. However, I’ve had to spend more than $1,000 on it to replace plastic parts. I had another Deere garden tractor with the same problem so I trashed it. I called the company to complain about both tractors but got no help. I always kept these tractors inside a shed, but they just crumbled apart.”
“My 1998 Deere 4500 tractor is my best buy. It has more than 1,200 hours, yet I’ve only spent about $100 on it other than regular maintenance.”
“My son and I bought two Deere 4500 tractors and they’re both worst buys. The seats on both tractors cracked and came apart from the seat frame, and the plastic engine cover grille and steering instrument housing cracked and fell apart. Also, the shift lever and gears came apart. I got no help from the dealer. The loader bucket on my son’s tractor shakes the entire tractor to the point it pulls the bolts out of the frame. The engine works great, however, as do the hydraulics.
“We both bought Deere Gators, too, and they’re also worst buys. The seats fell apart within a year.”
John Deere 4600 4-WD tractor
2 Best Buys1 Worst Buy“I like my 1999 Deere 4600 4-WD tractor with cab. All I’ve replaced is the seat, a battery cable, and 2 door cylinders. Great tractor.”
A Deere 4600 4-WD loader tractor rates as Monte’s “worst buy”. “The body panels are made of plastic that’s now breaking. The hydraulics run extremely hot, and as a result the loader can’t hold a load for more than 15 min.”
Curtis nominates his 1999 Deere 4600 4-WD tractor, equipped with a front-end loader, as his “best buy”. “This tractor is unbelievably easy to operate. The transmission has low, medium and high range, with four gears in each range. To shift from forward to reverse in the low and medium gears, all I have to do is move a lever on the steering column, right where the turn signal would be on a car. I don’t even have to use the brake or clutch. It really works great when I’m mowing, or doing anything that requires a lot of forward and backward shifting.
“I use this tractor really hard, probably a lot harder than it was designed for. One time I was rebuilding a berm alongside a creek and working in the water. I accidentally ran into a hole in the creek, which caused the front end of the tractor to go under water, and the engine died as I was trying to back out of the hole. The nose of the tractor was out of sight and water was right up to the seat, but I was still able to restart the engine right away, which really surprised me. After I got the tractor back on dry ground and checked it out, I couldn’t find any water in the hydraulics, oil, or fuel. I was able to keep on using the tractor as if nothing had happened.
“The front-end loader is so handy and easy to use that I’d be lost without it. This tractor can outwork a lot of bigger tractors. It’s well worth the money I put into it. I added a holder on the right fender where I can put a small cooler for sodas and water. It’s nice to be able to get something cold to drink while mowing or doing other work with the tractor. There’s plenty of room to put toolboxes. I added electrical outlets on the front and rear of the tractor so I can plug in a 12-volt air compressor or a chain saw sharpener for use when I’m cutting logs.”
On the negative side, “I bought a new Sears circular saw for $39 and started using it to cut 2 by 4’s. The clutch burned out after only about one hour. I took the saw back to the dealer but he said I had to leave a $32 deposit in order to have the saw repaired, even though I used it for only one hour. He said that since the saw was an electrical item, it wasn’t covered by the warranty and that if the repairs cost more than the deposit, I would have to pay the difference. I threw the saw away.”
John Deere 4620
3 Best Buys0 Worst Buys“My 1994 Deere 4620 is an excellent tractor. It has had a few electrical problems but they weren’t too hard to fix.”
On the “worst buy” side, he lists his 1992 Chevrolet Silverado 4-WD pickup equipped with a 6.2-liter diesel engine. He bought it used in 1996. “It’s a poorly built pickup. The 4-WD should be made to shift like 1971-1976 models. Also, it had many electrical problems. For example, the lights would go out while I was driving at night. New switches for it weren’t cheap. I finally sold it 3 years ago at a loss and bought an older 1976 GM 4-WD pickup. At least it’s not loaded with computers and cheap electrical components.”
“It gets a lot of hard use, but we’ve had very little trouble with it,” says David about his 1998 Kawasaki Prairie 400 4-WD ATV. “The company took care of a few minor problems. I have an artificial leg so I appreciate the automatic transmission. The floor board design is also helpful. There are more powerful ATV’s on the market, but after riding them for a while I really came to appreciate this machine.”
“My 1979 Ford F-250 4-WD pickup is a best buy. It has been all over the country and has been in a few tangles that required some hospitalization, but it came away better for it all.
“My 1972 Deere 4620 and 3020 tractors are dependable and are best buys.
“I’m well pleased with my Deere 535 round baler. I’ve owned Hesston and Gehl models before but this is the best.
“My biggest disappointments have been with my Case-IH 470 and 480 21-ft. disks. In my opinion, these discs were nothing but glorified sheet metal. I sold both of them and bought a Deere 14-ft. model. I can cover the same amount of ground as I had been covering with the two Case-IH models, and do a better job. No problems.
“My Hesston 6650 swather is a disaster. I don’t understand how a company can even put its name on a machine like this. I wish I still owned my Deere 1600 14-ft. hydraswing swather.
“I was given a kit to raise the rear bench seat in my 1985 Ford Supercab pickup. It was purchased through J.C. Whitney and was something that I had asked for. However, it’s a worst buy. The bolt holes in the brackets were about three sizes too big, the washers were too small, and I had to reshape some of them to fit. I was really disappointed with it.”
R.D. Fricker, De Valls Bluff, Ark.: “My best buy is a Long 1200 3-pt. backhoe that I bought used from a farmer who had used it on his Deere 4020 tractor. The tractor’s -high oil pressure and high volume of oil caused it to leak quite a bit of oil. I had the main valve rebuilt for $50 and replaced some hoses. I bought it to use on my Deere 2355 tractor, but might also use it on my Deere 4620. installed a ‘T’ in the hydraulic line between the pressure control valve on the tractor and the hydraulic cylinder valve and ran a hose from the T to a Prince RD150-16 adjustable 0-16 gpm flow control valve that I bought from Northern Hydraulics (ph 800 533-5545). I had to use the flow control valve because the backhoe uses only uses 8 gpm. The return line goes to a porton the hydraulic oil filter cannister. “Tuse the backhoe to dig ditches, remove stumps, and transplant small trees and bushes. I also use it to repair levees and to ( )\9.~2— #£=£pape cunw.ac Best & W ( drain rice fields.”
John Deere 4630 self-propelled sprayer
3 Best Buys0 Worst Buys“My 2011 Deere 4630 self-propelled sprayer runs smooth, is fast and handles very well. The automatic boom shutoff works great with no misses. The chemical eductor will take a 51-lb. bag of AMS in about 10 seconds. One improvement I’d like to see is an overhead view from the 2600 Greenstar display instead of the current ‘highway’ view.”
Gordon owns a 1977 Deere 4630. “We love it. We bought it used with 4,000 hours and now it has more than 8,000 hours. It has required very few repairs. The only problem is that it starts hard, which is a problem with all 30 series tractors. Also, it should have a bigger fuel tank. We added an auxillary fuel tank.”
Galen likes his 1977 Deere 4630. “It has never had any serious problems. It pulls well and is reasonably fuel efficient. My only complaint is that it starts hard.”
John Deere 466 round baler
3 Best Buys0 Worst Buys“It has performed beyond my expectations,” says Michael about his Deere 466 round baler. “I’ve used it to make almost 10,000 bales. The only repair it has needed was to a drive chain. The 4-ft. bale width allows us to move hay up narrow roads without posing a danger to oncoming traffic.”
Charlie likes his older model Deere 466 baler, which hasn’t given him any problems in two years of use, putting up 400 tons of hay per year. “It bales every bale perfectly and never misses tying one.”
He’s also pleased with two Ford 5000 diesel tractors he owns. “One’s got 3,000 hours on it, the other’s got 2,00 hours on it. They never give us a bit of trouble and are easy on fuel.”
On the negative side, he’s disappointed with his 1998 Deere Saber lawnmower equipped with an 18 hp engine. “It breaks every time I set foot on it. First, it was the steering bar. Then it was a bearing out of the mower deck. Next, a cut-out switch went out on the engine and it wouldn’t start. We finally took it back and traded it for a 1998 Craftsman with 21 hp engine which we haven’t had any trouble with so far.”
A 1997 Deere 466 round baler heads Alex’s list of best buys.
“After more than 8,000 bales, this baler still makes the tightest, densest bales of any machine on the market. The computer controls so many functions that one rarely needs to leave the tractor seat during a full day of baling. The belts and splices are so tough that five of the six belts are originals. The other was replaced under warranty with no hassles. The mega-tooth pickup does an excellent job while baling at a typical speed of 8 to 10 mph.”
On the negative side, Alex has had problems with his H&S 430-bushel manure spreader.
“It’s made so cheaply our 20-year-old Knight spreader is in better shape. First, the hitch bent. Next, the beaters bent because they’re built so soft and thin. Then, the end-gate bent back so far it contacts the beaters when it’s raised. The bearings on the beaters went bad three times. The spreader is permanently in high gear because the shaft connecting the low gear sprocket broke in half. To top it off, the seals on the end-gate cylinders blew out because the cylinders are cheap. We replaced the seals only to have the same problem again. We ended up replacing the cylinders with after-market cylinders. The company told us they would pay to have the hitch reinforced at a local welding shop and that they would replace the beaters free of charge. Since having the hitch reinforced, we have been in contact with the dealer we bought it from but have heard nothing further from the company.”
John Deere 4720 tractor equipped
2 Best Buys1 Worst Buy“My Streamlight flashlight is by far the brightest ‘somewhat-compact’ flashlight I’ve ever owned (ph 800 523-7488; www.streamlight.com). It runs on 2 lithium ion batteries and even lights things up in the daylight.”
On the “worst buy” side, he lists his Deere 4720 tractor equipped with a cab. “It had a lot of problems in the first 6 mos. The air conditioner quit working, antifreeze and transmission fluid leaked, the 3-pt. arms wouldn’t fit with the backhoe brackets in place, the hydraulics wouldn’t kick out with the 3-pt. all the way up, and the steering system locked up anywhere within its steering range from far left to far right. The only thing the dealer fixed was a wheel seal. The roof joints leaked, which allowed dirt into the cab that plugged up the air conditioner. A front cover on the engine leaks and would cost $2,000 to fix. However, the tractor is now out of warranty so I would have to pay for it.”
“I like the 2005 Deere 4720 self-propelled sprayer I bought used a couple years ago. I use it on about 23,000 acres each year. No downtime, and parts and service are easy to get.”
“I bought a Deere 4720 tractor last December. After I accepted delivery I noticed the hood had numerous dimples on it. I contacted the dealer about my disappointment and they said I’m the only customer who’s ever complained about it. But I later found out numerous tractors have had this problem since April of 2006. Anyone who has a Deere tractor with this problem should complain about it.”
John Deere 5310 tractor
3 Best Buys0 Worst Buys“My 1999 Deere 5310 tractor with a 521 loader has over 2,000 hrs. on it and barely requires anything beyond routine maintenance. It runs great on dirt-cheap waste oil fuel. This was my sole machine for a long time, and it’s had a hard life, but it’s still running. It starts well in cold weather. It’s been a great tractor.
“My 1949 Ford 8N with loader is over 70 years old and does its job. It’s so easy to work on. I wish tractors were still made with this simplicity and quality. Parts are cheap for it.
“I’ve bought several Walmart EverStart 12-volt car batteries. They only last just over the warranty (about one year) and corrode badly. I would spend the extra money on a different battery.”
“My 1999 Deere 5310 with loader has been exceptionally reliable and hard working.”
“My Deere 5310 and 4720 loader tractors never fail to do the job and always start right up. They work great for doing everything from cleaning snow off driveways to mowing hay, pulling a Deere round baler, and feeding bales to livestock. The 4720 is just the right size for performing smaller jobs around the farm yard.”
On the “worst buy” side, he lists his 2012 Ford Escape SUV equipped with a 6-liter engine and 6-speed automatic transmission. “It does a terrible job of shifting gears whenever the temperature is between 35 and 55 degrees. It slips between third and fourth gear and then ‘slam shifts’ between fourth and fifth gear. I’ve been back to the dealer several times and also called the company. They claim they’ll fix the problem but it hasn’t happened yet. They did increase the shift point rpm’s of the engine, but all that did was lower the fuel efficiency.”
John Deere 6300 tractor
2 Best Buys1 Worst BuyJim’s had trouble with his Deere 6300 tractor. “Four different Deere mechanics have worked on the air conditioner, replacing the compressor, condenser, lines and refrigerant each time, but nothing has helped. Now they say the problem is with the evaporator, and making the repair will cost $2,000 for labor and $1,000 for the evaporator itself.”
Harry’s happy with his 1996 Deere 6300 tractor equipped with a cab and 620 front-end loader. “It has a lot of power and a roomy cab. I’m 6 ft. 4 in. and my son is 6 ft. 9 in. but our height is no problem. The loader is operated by a single joystick control which works great for moving hay and for cleaning our barn lot.”
A Deere 6300 tractor rates as Grant’s “best buy”. “It has a quiet cab and a lot of power. I use it a lot to spray orchards and to do general field work. It’s a pleasure to drive. I really like the power shift transmission.”
John Deere 6400 4-WD tractor
2 Best Buys1 Worst Buy“My 1998 Worksaver post driver is built much stronger than the Shaver drivers I’ve used in the past. The company was helpful with a couple of problems I had with it.
“My Shaver post driver is my worst buy. I had problems with the hydraulic leveling part of the driver but got absolutely no support or help from the company. When the problems couldn’t be solved I finally traded it in for the Worksaver.
“MyDeere 6400 4-WD tractor and Deere 466 round baler are both best buys.
“MyNew Holland 258 and 260 hay rakes and the Ellerbe double rake hitch I use to pull them are all best buys. They’re real time savers.
“MyNew Holland 617 disc mower works great. I don’t think I’ll ever go back to a sicklebar mower.”
“I like my 1998 Deere 6400 4-WD tractor equipped with a Power Quad shuttle shift transmission, 640 front-end loader, and cab. “It’s an excellent loader tractor. I use it mostly to pull a discbine and a baler and to feed my livestock. It has about 1,000 hours and the only problem was a fitting that blew off a hydraulic line. The dealer promptly replaced it. The loader has quick-tach brackets that let me change from one piece of equipment to another in five minutes or less. I use a bale grabber, bale forks, pallet forks, post driver and bucket on the loader. The transmission has a park setting, which I really like.”
David’s had problems with his 1995 Deere 6400 4-WD tractor. “At 90 hours the hydraulic system broke as I was planting corn. It took nine days to get it repaired because the company sent the wrong part. Then the switch that engages the front wheel assist broke. I sold the tractor at 450 hours and used the money as a down payment on a farm.”
John Deere 6410 4-WD tractor equipped
3 Best Buys0 Worst BuysA Deere 6410 4-WD tractor equipped with a self-leveling front-end loader rates as Donald’s “best buy.” “I haven’t had one problem with this tractor. I’ve been using Deere tractors for well more than 50 years and have tried other brands, but in my opinion Deere tractors are the best.
“My Krone 283 10-ft. disc mower is my worst buy. This mower cost me more than $3,000 in broken glass on the cab of my tractor. It wouldn’t cut with the cover in the low position. It did cut with the cover in the high position but then it would throw rocks. The dealer wouldn’t do anything about it.”
Peter is the satisfied owner of a Deere 6410 4-WD tractor equipped with a front-end loader and cab. “This is the 50th Deere tractor I’ve owned over the years. It has about 1,500 hours on it and works great.”
Curtis likes his 2001 Deere 6410 4-WD tractor. “I really enjoy driving and working with this tractor although I do wish it was more fuel efficient. I had a companion seat put in the cab, and my three grandsons really enjoy riding in it.”
John Deere 6430 tractor
3 Best Buys0 Worst Buys“I’m well satisfied with my 2009 Deere 6430 tractor, which I bought used in 2015. It has excellent power, a nice cab, and the infinitely variable transmission is outstanding for tillage, baling and spraying.
“I’m also impressed with my 2017 Ford F-150 pickup equipped with a 2.7-liter Ecoboost engine. It has a lot of power and is fuel efficient.”
“I like my Deere 6430 tractor equipped with a 673 front-end loader. I use this tractor on my round baler. It has good power and handles well, with an excellent cab.”
“My Deere 6430 equipped with a Deere 670 frontend loader is an excellent tractor.”
John Deere 6620 combine
1 Best Buy2 Worst Buys“Two years ago I bought a new Makita chop saw which is my best buy. I’ve used it hard and it has done a very good job.
“We bought a plastic bottom for the un-derfeed auger on our Deere 6620 combine. After only one year of use it wouldn’t stay in place. The dealer wouldn’t do anything about it.”
“I sold my Case-IH 7110 4-WD tractor to get rid of the payments and then I fixed up my Oliver 1855 tractor with a new engine, radial tires, and lights. I also mounted a White 105 cab on it. I’m very happy with it. It’s doing the same work we did with the 7110. “My 1984 Deere 6620 combine is my worst buy. Last year the rubber drain line at the bottom of the oil filter blew out, causing the engine to lose oil. We had to make repairs, including installation of a new crankshaft. The company should have used steel-braided line instead of rubber.”
Steven L. Brooks, New Windsor, Ill.: Steven's pleased with his 1983 Deere 6620 turbo dicsel flatland combine, but sys it could use a number of improvements. “It works very good on perfectly flat ground, but poor on slopes, Grain runs over the rear end of the sieve and onto the ground. I cut out grain saver fins above the chaifer inside an old White combine and installed them on the outside edges of the top and bottom sieves (featured in FARM SHOW'’s Vol. 12, No. 1). It lets me harvest three to four times faster on hillsides. The engine gauge should be mounted in front of the operator instead of behind him. The shutoff system that controls hot water for the heater doesn't work right. The dealer replaced our system, but the cab got even hotter than before. We finally installed a plumbing gate valve in the heater hose so that we now have real control over the heat and air conditioning. “The snapping rolls on our Deere 444 corn head are poorly designed due to lack of a lower support bearing. We have to replace the rolls every year. The fingers on our Deere 213 reel head are too short. By the time the fingers reach down to the lodged bean stalks, the reel bats are already shattering standing beans. The reel has a ‘caveman’ pin-and-hole cylinder height adjustment. It should have a cylinder stop spacer that simply snaps onto the cylinder rod.”
John Deere 720 diesel
3 Best Buys0 Worst Buys“I bought a 1956 Deere 720 diesel in 1963 with 6,000 hr on it. It now…”
“Back in 1958 I bought a used 1957 Deere 720 diesel tractor at a farm sale and still use it almost every day. The Firestone high wall tires on it have never gone flat or been removed for any reason. The lugs are still good, but the tire is showing its age and now has a few cracks in it.”
“I bought a new Deere 720 front-end loader for my Deere 4020 tractor and am well satisfied with its performance and ease of operation. I bought the optional quick tach bracket for the bucket and bale spear and also the optional joystick hydraulic control lever. I wouldn’t buy a loader without these options. “My Deere 752 17-ft. hay tedder is a best buy. It covers a lot of acres fast and tedding the hay lets me bale one or two days sooner than I could without tedding it.”
John Deere 7300 planter
1 Best Buy2 Worst BuysJim’s happy with his 1995 Deere 450 grain drill. “I like it because it’s easy to set the seeding rate. Also, I like the double disc openers and the press wheel design. Overall, it’s a good drill. My only complaint is that it’s made from light material.”
He isn’t impressed with his 1995 Deere 7300 planter. “One problem is that it’s built out of light material. Another is that it’s a plateless planter which makes it hard to set the seeding rate, especially for cotton. I traded in my Deere 7100 planter which was 12 years old, and it worked a lot better than this one.
“I’ve owned three Deere 4240 tractors and liked all of them. Hardly any problems at all.”
Larry A. Maiers, Stewart, Minn.: “I like the simplicity and capacity of my 1994 Feterl 10-in, dia,, 60-ft. grain auger. “My 1995 Deere 7300 12-row VacuMeter planter is a best buy. It places seed accurately and with precise depth control.”
Thomas Stephens, Guymon, Okla.: A 1991 Deere 7300 Max-Emerge 12-row vacuum planter rates as Thomas's “worst buy”, “I’ve been using it to plant milo. The problem is that it plants double and triple seeds. I mightas well be using a wheat drill, The scrapers wore out completely after 400 acres of use. got no quick help to solve the problem from my local dealer or the company representative. The bearings on the main drive are already wearing oul.” Thomas is happy with his Walker riding lawn mower. “It runs smooth and turns ona dime. It’s an excellent grass catcher and easy to handle. It's a real dream to mow with.”
John Deere 7720 combine
3 Best Buys0 Worst BuysLewellen’s happy with his 1981 International 1460 Axial Flow combine. “This combine is well designed and easy to set for a clean threshing sample. It’s also easy to work on. It has very few moving parts on it compared to other makes. It has an excellent cab. There’s never any dust coming out of the cylinder down to the feederhouse.”
On the “worst buy” side, “I had part ownership in a Deere 7720 combine. There’s not enough pages in FARM SHOW to tell your readers about all the problems and headaches this machine caused me. My repair bills ran $3,000 to $7,000 a year. The International combine we own now has only cost $400 to $700 a year in repairs.”
Gordon’s the satisfied owner of three 1983 Deere 7720 combines. “They’re reliable machines with a lot of capacity. We used them on more than 5,000 acres last year and had a total of only about three hours of downtime. We added air chaffers and built our own beaters which we slowed down to 100% of cylinder speed. We also reversed the rotation of the conveyor augers and made modifications so we can dump tailings into the middle of the feederhouse. In small grain, our 7720’s have almost as much capacity as the larger 8820 models.”
Donald Murray, Milan, Mich.: Donald's worst buys are retractable "poly fingers" that clamp on combine cross augers from May Wes Mfg. "I bought one set plus two extra fingers for the header on my Deere 7720 combine. I made five rounds in a 32-acre wheat field and they “ had all fallen off or doubled over. I sent the fingers back to the company last July and asked for my $97.50 back. never heard from them.”
John Deere 7800 MFD tractor
3 Best Buys0 Worst BuysDan’s not happy with his White 271 Rockflex disk. “We broke more axles in two years using this disk than we did in 10 years with our old rigid disk.”
On the “best buy” side, “Our Deere 7800 MFD tractor is almost perfect. It’s easy to operate and has a comfortable cab with an excellent view. It also has a lot of power.
“We like our Gleaner R42 4-WD combine. We had a wet fall last year and the 4-WD paid for itself.
“Our Kinze 2500 twinline 8-row planter is a best buy. It places the seed very accurately which results in good stands. It’s a real pleasure to watch it pivot hydraulically and then drive down the road.”
Dan’s not happy with his White 271 Rockflex disk. “We broke more axles in two years using this disk than we did in 10 years with our old rigid disk.” On the “best buy” side, “Our Deere 7800 MFD tractor is almost perfect. It’s easy to operate and has a comfortable cab with an excellent view. It also has a lot of power. “We like our Gleaner R42 4-WD combine. We had a wet fall last year and the 4-WD paid for itself. “OurKinze 2500 twinline 8-row planter is a best buy. It places the seed very accurately which results in good stands. It’s a real pleasure to watch it pivot hydraulically and then drive down the road.”
“It’s the most enjoyable tractor to operate that I own. It’s easy and actually fun to drive,” says Howard about his 1995 Deere 7800 MFD tractor. “No problems after 1,000 hours.” On the negative side, he lists his Tube-O-Lator big round bale bagger. “It should use a heavier bag to prevent rodent damage. Another problem is that it’s very tricky to operate - there’s no room for error regarding bale size. If the bale is too big you can’t force it in or you’ll tear up the machine. If the bale is too small the bag will be too loose and let in air which will allow the bales to mold. “I also had problems with my 1996 Deere 3830 windrower. It hadn’t been set up properly before it was delivered to my farm. I had already sold my old 3830 windrower to another farmer, and I had to hire him to cut my crop while the new windrower sat in the shop. I finally sold it.”
John Deere 850 tractor
3 Best Buys0 Worst Buys“The Deere 850 tractor I bought used is my best buy. I use it to mow my yard and to till my garden. It starts great during the winter when I use it to push snow off our lane.”
“I’ve used my 1979 Deere 850 tractor and model 72 mower to cut five acres of grass and to do other small jobs, and neither the tractor nor mower has required any repairs. They’re both best buys.”
“It pays to buy good, brand name tools,” says John. “I learned that lesson from buying a 20-ton Harbor Freight hydraulic drill press. It leaks oil and the ram sticks. The company sent the wrong replacement parts for the original assembly.”
On the positive side, he’s happy with a 1984 Deere 850 lawn tractor equipped with a 72-in. belly-mounted deck. “It’s very economical, uses less fuel than a 12 hp. lawn tractor, and I’ve had absolutely no mechanical problems in the 3,000 hours I’ve used it. The battery lasted 10 years. We bought a new Deere 870 last year but kept the 850 because replacement only ran about 20 hours before it went out. I waited two years before replacing it and now I’ve run the new one about 20 hours and it smells like it’s ready to fail at any time. In my opinion, the company needs to make the center gear box heavier than the outside gear boxes.”
John Deere 8820 combines
2 Best Buys1 Worst Buy“I love my two 1988 Deere 8820 combines. They’re reliable and rebuildable and aren’t as heavy as the new models. I harvest a lot of seed grain down south so the sample has to be clean with minimal kernal damage. These combines deliver on both counts. I’m also satisfied with the new 930 series headers. The old 230 models had a skip feed problem about 4 ft. in from the right side.”
“It’s the best kept secret in the combine industry,” says Bob, pleased with his New Holland TR86 combine. “It runs smooth and quiet and is easy to service. It does a nice job threshing and puts undamaged grain in the tank. It’s almost impossible to lose any grain out the back. It’s well-built and has more capacity than a Deere 8820. It also has excellent resale value. “My Deere 8820 combine is my worst buy. It’s too noisy, very unreliable, delivers poor quality grain, and is too big and heavy for its capacity. It’s also underpowered, hard to repair, and has poor resale value.”
Larry Paul, Shickley, Neb.: A 1972 Deere 843 corn head and a 1979 Deere 8820 combine head Larry's list of best buys. “These two old warriors just go and 20. They pick a pretty big crop every year with very little trouble. I only had to stop for 15 minutes for repairs this last year.”
John Deere 925 mower conditioner
3 Best Buys0 Worst Buys“My 1999 Deere 925 mower conditioner is my best buy. I especially like the flail conditioner, which can pass objects through without damaging the machine. This machine just mows and mows without problems. It has held up well over thousands of acres.
“My 1966 Deere 4020 tractor is a best buy. It rarely has problems and is worth exactly what I paid for it six years ago.
“My 1999 Deere 6310 tractor is comfortable, quiet, and does a good job of handling our mower and round baler. The power quad transmission lets us work fast in the field. It lets me mow our field 30 minutes quicker than with my 4020, just because of its ability to easily and constantly change gears.
“My 2003 Vermeer 605XL baler makes a good bale and the pickup gets all the hay. However, it has had a lot of problems.
“My 2004 Vermeer WRX rake does a good job and is easy to adjust. However, it’s four real tires, a good paint job, and some better-grade bolts away from being a best buy.
“My Deere 1600 hydraswing mower conditioner never made it through a field without breaking down. The final blow came when we couldn’t get it unhooked from the tractor’s pto shaft, and we ended up having to take the pto shaft out of the tractor.”
“It does a clean, neat job at a reasonably fast speed. No skips or plug-ups,” says Edwin about his Deere 925 mower-conditioner equipped with rotary disc cutters.
Thomas likes his 1999 Deere 925 discbine. “When we switched from a sicklebar mower to this discbine we couldn’t believe how much time it saved and how easily it handles.
“Our 1999 Deere 6 by 4 Gator is a worst buy. The machine ran good but gas kept getting into the engine crankcase. We took it back to the dealer four times, but he couldn’t solve the problem. We finally traded it in at a loss.”
John Deere 926 disc mower conditioner
3 Best Buys0 Worst BuysWes likes his Deere 328 square baler. “This baler has been exceptional. It rarely misses tieing a bale - hasn’t missed one in more than 1,000 bales. Also, the bales are of uniform size and stack well on my New Holland 1033 bale wagon.
“My Deere 926 disc mower conditioner cuts and conditions great and is easy to hook up and also to service.”
“Our 1988 Deere AMT 5-wheeler, powered by a Kawasaki engine, is our worst buy. The engine needed a new starter which cost me $540 because engine parts can be purchased only from a Deere dealer - not a Kawasaki dealer. Replacement brakes for this rig are also overpriced. I won’t buy a Deere Gator equipped with a Kawasaki engine ever again.
“The Firestone 18.4 by 34 radial tires on my tractor have bulges and ride rough on hard roads. Unfortunately the company won’t replace the tires. They said the problem is caused by rusty wheel rims. I had Goodyear tires with the same problem but the company replaced two of them free of charge.
“Our 2002 Deere 926 disc mower equipped with an impeller conditioner is a best buy. It cuts fast and does a good job of conditioning. The only problem is that the windrow lever catches on everything and either falls down or breaks. We finally solved the problem by turning it around. Also, the tongue is far too long and should be shorter.”
Kevin nominates his Deere 926 disc-type mower/conditioner as “best buy”. “My wife and I used it last year to cut 400 acres of hay and never had to get off the tractor other than to grease it. It was also cheaper than the other brands we checked out, which was a surprise.
“My Hesston 555T round baler is my worst buy. We’ve only used it to make about 1,500 bales but have already had to replace two belts at a cost of $400 per belt. One belt got wrecked when a $4 spring broke. We’ve had numerous other problems with it. We had been using a Vermeer 605A which didn’t have nearly as many problems. We plan to trade the Hesston in this year for a New Holland or Deere model. We would’ve been better off buying one of those brands to begin with, but we tried to save a buck.”
John Deere 930 zero-turn riding mower
3 Best Buys0 Worst BuysA Deere 930 zero-turn riding mower rates as his “best buy”. “The company should come out to our farm and do a TV commercial on how we use this mower. We use it in some areas where only a brush cutter should go, and in other areas to leave the lawn looking like a golf course. We’ve bent blades on this mower, but have never broken a spindle or warped the deck.”
“My best buy is my 1996 Deere 930 disc mower conditioner. It does a great job at high speed and has excellent flotation. It’s also easy to adjust. “My worst buy is my 1997 Orkel GP 1202 silage baler. I was told that it could be used to bale both dry and wet hay but it has failed to do so. The company has refused warranty and technical support. This baler is very limited in its use at best. Like other owners have said to me, ‘Use it one day and work on it for two’”.
“Our 1994 Martin 8-ft. silage bagger packs well and makes a smoother bag of haylage than any other bagger I’ve seen. It works great and costs only about two thirds as much as other popular baggers. “We like our 1995 Deere 930 12-ft. mower-conditioner. It mows and dries hay faster than the New Holland 489 mower-conditioner we previously owned. Works great.”
John Deere 9300 tractor
2 Best Buys1 Worst Buy“My best buy ever is a 1987 Versatile 976 tractor. It cost me nothing but batteries. It was a great, powerful tractor. I’m sorry I traded it for a Deere.
“Another great buy is my Hustler diesel lawn mower. It’s been bulletproof. I’ve only done maintenance; not a penny has gone to repairs. The grass goes out the back, so there are no unsightly windrows or grass in your face when the wind blows. This beast has over 600 hrs.
“My Case IH combine also deserves recognition. What a machine. It’s easy to service and repair (one chain on the whole machine).
“My worst buy ever is my Deere 9300. I should’ve kept the Versatile. Deere support was a joke. I bought a 5-year, 5,000-hr. extended warranty. The engine failed at 2,800 hrs. I was told I was out of warranty by four months. The same thing happened with a 260 skid steer. It was purchased new. The engine failed at 512 hrs. I was again told my machine was out of warranty, this time by three months. It cost me $8,000. Where is product support? And a little pride in your customers and products?”
“We recently bought a new Flexicoil 6000 disk seeder and 340-bu. air tank as well as 120-ft., 1,200-gal. sprayer. We had to spend three days on each machine adjusting and replacing parts in order to get the machines out into the field. The sprayer caused the most problems because the solenoid valves were hooked up wrong. Five shut-off valves were broken and had to be replaced before we could even start using it.
“We met with the company and told them about the problems, but they insisted everything had been checked out prior to the sprayer leaving the factory. It cost us more than $1,500 per year just to keep the machine running. The dealer who sold the machine to us is no longer in business. We’d have to look really hard before we’d buy another Flexicoil machine. We finally traded the sprayer in for a Melroe 4640 Spra Coupe. It’s simple to operate and doesn’t have as many electronics to malfunction.
“It’s sad that after spending so much money on equipment the company gave such poor service and had such a poor attitude toward a customer. Our farm is located only 120 miles from their factory, so they could have come out and corrected the problems. This company needs to change their attitude regarding customer service.
“Our Deere 9300 tractor is an awesome piece of machinery. It has super hydraulics and is very user friendly. Deere equipment is well-tested and proven. It keeps its value well.”
“Our best buy ever was our 1976 Versatile 976 4-WD tractor. We bought it for $75,000 and sold it 11 years later in 1987 for $60,000. It was a great workhorse with unmatched low-end power. The only repair it ever required involved a compressor on the air conditioner. It went through only one set of batteries and the engine required only regular maintenance. This tractor was super easy to work on and the components were easy to access or to remove for repairs.
“We replaced the Versatile tractor with a Deere 9300 that had the same 360 hp rating. It doesn’t have as much low-end torque as the Versatile’s Cummins engine, but it’s a little easier on fuel and has much better hydraulics at low rpm’s. Also, it rides smoother than the Versatile model because it’s equipped with fat 700–710-R38 radial tires which run at low air pressure and flex a lot to make for a smoother ride. The Deere doesn’t turn nearly as short as the Versatile did. I found myself having to fold up implements several times in order to save a fence while pulling anhydrous tanks, because I couldn’t back up.
“Our 1987 International 1680 combine has 3,000 hours on it and still performs as good as it did new. It has needed very few repairs and none of them have been expensive. It’s a good machine. I hope the New Holland merger with Case-IH doesn’t mess up a good thing.
“We’ve had all brands of pickups and trucks over the years including Ford, Dodge, and Chevy. They’ve all been okay, with the best still being a 3/4-ton Chevrolet 4-WD model which we bought new in 1980. It’s still a darn good pickup.
“Our best recent new purchase is a 9,000-lb. capacity car hoist that we installed in our farm shop. I had no idea we would use it so much. It makes oil changes, exhaust work, brakes and shocks, transmissions, and rear-end work much easier to do. It works perfect every time and makes it very safe to work under a vehicle.”
John Deere 950 tractor
3 Best Buys0 Worst Buys“My 1984 Deere 950 tractor has never failed me and still runs like new.
“My 2012 Husqvarna 445 chainsaw doesn’t oil the chain adequately, and that caused it to burn up after only 15 min. of use. The saw was brand new out of the box. Unfortunately, I bought the saw 2 years ago but hadn’t used it, so the warranty had expired. I called the company but they wouldn’t make good on it. I did some research and found that other people are having the same problem with this model.”
Rollin’s the satisfied owner of an Echo 510 chainsaw equipped with a 20-in. bar, and also an Echo 8000 model. “The 8000 model is a little temperamental at starting but it will still keep up with an older Stihl 045 model that I’ve had for some time.
“I’ve also had good results with my Deere 950 and 1070 chainsaws.”
Wilbert Kadolph, Pinckneyville, Ill.: “My Deere 950 diesel tractor equipped with power steering and a 6-ft. belly mower is a best buy. It reduces mowing time and rides much smoother than a riding lawn mower.”
John Deere 9650 STS combines
3 Best Buys0 Worst Buys“We bought one of the first Deere 9650 STS combines in our area in 1999. We were very disappointed to discover that the combine was putting anywhere from 1 1/2 to 3 1/2 bushels of corn on the ground, and 3/4 of a bushel of beans.
“Until we bought the new Deere we had been using a 1979 model IH1460 and we didn’t realize what a great combine it was. There was virtually no grain loss behind that machine.
“To find the problem with the STS we must have rolled the chopper away more than 100 times. We would make adjustments in air flow, sieve setting, concave clearance, and ground speed. We got pretty good at correlating what was what, but it was a maddening time.
“In our opinion, when you pull the chopper away, you can really tell what’s going on. The chopper hides a lot of losses and spreads them out to such an extent that you say, ‘Well, that doesn’t look so bad.’
“In some places we were counting 56 seeds per square foot behind the separation section of the combine. And I’m not talking about head loss - I’m talking about material that was in the combine that’s now laying on the ground.
“We had three different company reps out but nobody could really make it work much better. We finally ended up installing a Kuchar concave threshing assembly from Kuchar Combine Performance in Carlinville, Ill. (ph 217 854-9838). It was very easy to see the improvement. We had a six-row head on that machine and we could tell what was going on without even rolling the chopper out of the way.
“To my knowledge, Deere has not made changes on their STS models to fix the problem. However, they do have three different concaves: the round pipe and a more traditional concave (small wire and large wire). When you buy a new combine model that hasn’t been in the field, you take what the dealer recommends.
“As far as I know most of the machines that have come into our area have the round bar concave. Once we changed out of that concave to the Kuchar concave, our field losses disappeared.
“I heard for years people saying that Deere couldn’t make a rotary combine,” and then when they finally launched their rotary combine, they confirmed that the doubters were right —they weren’t, in fact, capable of making a rotary combine that worked as well as others.”
Larry’s impressed with his 2002 Deere 1770 16-row no-till planter. “I can fold the planter from the tractor cab. Once it’s folded, it’s no wider than the dual wheels on my tractor. The company sent people from the factory to monitor the planter’s performance in the field and to evaluate some minor changes and updates. Support has been great.
“My 2001 Deere 9650 STS combine does a fine job. It has plenty of capacity for my 8-row corn head and 25-ft. platform.”
Tom’s “best buy” is his Deere 9650 STS rotary combine equipped with a Deere 925D 25-ft. draper header. “It’s a high performance machine with virtually no grain loss and the draper header does an excellent job cutting grain. The automatic header height control system is a real plus for harvesting short grain. I’ve been operating combines for 49 years, and this one outperforms them all.”
John Deere 970 tractor equipped
3 Best Buys0 Worst BuysSteven’s happy with his 1997 Deere 970 tractor equipped with a Deere 430 quick tach front-end loader. “The loader goes on and off easily, with no tools needed to hook it up. I do think the emergency brake release needs to be relocated.”
John R. Farrell, Scottsville, N.Y.: John likes his Deere 970 roller harrow equipped with S-tines but has nevertheless had some problems. “This is a great machine. However, the S-tines don’t doa good job in stony soil because they don’t penetrate well enough. The old-style C-shanks would fit the harrow, and most machines in our area have them, but Deere doesn’t offer them as an option on new machines. They have to be purchased through parts.”
Robert Halverson, West Union, Iowa: A 1991 Massey-Ferguson 3140 tractor heads Robert's “best buy” list. “No problems after 1,500 hours. It has much more power than its 115 hp rating would indicate and is the most economical tractor I've ever owned. The 2-door cab saves a lot of steps. The can cooler in the cab, sun screen, and remote controls at the rear of the tractor for operating the 3-pt. hitch are all nice features. “My worst buys are ‘eyeball’ scarecrow balloons. You blow them up and hang them from the rafters of a building. They're supposed tokeep birds out, but they didn’t scare them atall, After three or four months the air went outof them. Luckily I didn’t pay much for them.” Herbert Farney & Sons, Lowville,N.Y.: “We're well-pleased with our Deere 970 roller harrow. Our soil tends to clod up when we plow. The roller harrow breaks clods down leaving a fine seedbed. “Our 1987 New Holland L-555 skidsteer loader is also a best buy. We use it more than any other machine on our farm - we'd be lost without it. It has about 6,000 hours on it. Other than new tires and a few minor problems, we haven't done anything to it. We ( = @ ae maengeens . 2a Best & V ( hope the new model that will replace it will serve us as well as this one has.”
John Deere D125 twin hydro mower
3 Best Buys0 Worst Buys“My 2017 Deere D125 twin hydro mower is an impressive machine. I’ve treated this mower as rough as others I’ve owned but only burned off one belt and that was my fault. I haven’t bent a blade even when hitting rocks and tree limbs. On other mowers I’ve owned, I’ve bent blades, burned belts and broken towers. This one has over 500 hrs. and still no problems.”
David’s “best buy” is a Deere D125 riding mower. “I mow approximately 4 1/2 acres all year. I’ve had other mower brands and none of them had the power or sustainability. All of the other ones had blades that would look like pretzels upon hitting a rock or stick but the Deere blades seem indestructible. They do need sharpening but have never bent. The only trouble I’ve had is with the belts. When I get something jamming the blades they will burn off if I don’t shut down soon enough.”
A 2017 Deere D125 riding mower rates as Dave’s “best buy”. “I use it on about 4 acres where I want to control weeds and wild blackberries. I’ve owned several other mowers over the years and had to constantly replace belts and blades after hitting rocks and brush stumps. But the blades on this machine seem indestructible even though I’m cutting the same areas.”
John Deere F510 front-mount riding mower
1 Best Buy2 Worst BuysOn the negative side, Rick lists his Deere F510 front-mount riding mower equipped with a 38-in. deck. “I like the tractor but I hate the deck. Like other Deere decks that I’ve used in the past, this one leaves skips between the blades even when I make a broad turn. I’ve used a 48-in. deck in the past and it also left skips. Also, the grease zerks are at the bottom of the deck where they’re hard to reach. The deck builds up with grass, and the blades are a pain to change because the deck can’t be pivoted up.”
Jerry Kroll, Montague, Mich.: “My “The cab is so small it must have been made for a midget.” 1992 Deere F-510 front-mount mower is a pleasure to operate, has plenty of power, and is maneuverable, It does a perfect job mowing. All components are easy to reach and service. No problems at all. “My 1992 Automatic ATF-600 roller mill works fastand does a nice job. Last fall I used it to crack shelled corn which I then discharged into a silo blower. I was able to keep up with our Massey-Ferguson 550 combine which is also a best buy.”
Donald Beechler, Springfield, Ill.: “It drives like a combine full of grain and steers so hard I feel like I'm boxing,” says Donald, unhappy owner of a 1990 Deere F-510 front-mount lawn mower. “The salesman told me it worked better and faster than any zero turning mower on the marketand would turnaround a 7-in. circle. If I drive real slow it might tum around an 18-in, circle, butif] “It drives like a combine full of grain and steers so hard I feel like I'm boxing.” drive fast it takes 4 ft. to tum and tears up the grass. I feel like my head is between my knees while I'm driving. I can mow only a couple of hours before I have to stop and rest. It takes me twice as long to mow my yard as itdid before. To make matters worse it’s hard to geton and off the machine. After using it for 11 hours I traded it in for a different brand.”
John Deere G110 riding mower equipped
1 Best Buy2 Worst Buys“My 2008 Dixie Chopper 2760 riding mower has plenty of power, great craftsmanship, and it’s built tough. Sometimes U.S.-made products cost a little more, but it’s worth it.
“I’ve had problems with my 2000 Deere G110 riding mower equipped with a 25 hp engine and 54-in. deck. I’m meticulous about maintenance, but this machine nickel and dimed me to death on repair parts. It had 110 hrs. when I sold it.”
“My Deere G110 garden tractor has been trouble-free. In the past we used many other brands, but they couldn’t hold up to all the mowing we do.”
“We bought our 2005 Deere G110 riding mower after we moved to a farm house on three acres.
“The G110 has a 12-in. wider cut than our old Deere 160 and is supposed to have more than twice as much power. However, the first thing we noticed was that it didn’t cut any more efficiently and bogged down almost as often as the old machine. The second time I used it in heavy grass, the plastic discharge chute broke off when one of the 1/2-in. tabs on the molded chute tore off due to the stress of pushing through heavy 7-in. grass. On the way back to the machine shed, the hood fell completely off and now has to be held on with a bungee cord. Also, the ground clearance on this machine is so poor it gets stuck nearly every time we use it. We then have to get a truck to pull it loose because it’s not possible to simply dismount and put the machine in gear due to safety devices.
“By the end of the first full season we had to replace the battery. Also, the top of the front tires had tilted inward at about a 60 degree angle, making steering almost impossible. When we had the mower serviced before winter, we had to have the entire front assembly torn down to replace a number of parts. The service department said this has been a common problem. Fortunately, the warranty covered most of the expense.
“The following spring, I was cutting near our house and found it necessary to back up and turn around. As I did so, the small beam that supports the front wheels broke in half and I had to push the mower to the machine shed, where it sat for three weeks until the dealer finally came out to take it back to his shop. His reply, ‘Well, sometimes things break’. My response to him was ‘And, sometimes people buy their $4,000 lawn mowers from other companies.”
John Deere Gator 620i utility vehicle
3 Best Buys0 Worst BuysStan owns a 2009 Deere Gator 620i utility vehicle. “My wife and I enjoy driving this machine almost every day. It’s dependable and easy to get on and off. A real workhorse. We’ve used the machine to pick up tons of rocks and to spot-spray crops using a 25-gal. sprayer mounted on back. It always starts and works great for checking on crops and cutting firewood in winter.”
“I’m 83 years old and my Deere Gator 620I utility vehicle makes it easier to take care of things around the farm. I use it to check on fences and cattle, to gather garden produce, and to keep the yard picked up.”
“My 2007 Deere Gator 620I has been in the dealership for 3 serious problems. The first problem was covered by the warranty. The second problem developed at just over 12 mo. and involved the Gator’s 617 cc Kawasaki engine. Deere covered about 95 percent of that bill. The third problem involves gas getting into the crankcase, which will require major repairs. Deere’s Customer Service department said they can’t help resolve this problem and that I’ll have to pay the bill.
“It’s obvious the Kawasaki engines on the 2007 Gators are defective and need to be recalled. In a recent issue of FARM SHOW Wayne Harley of Pennsylvania said he had the same problem with his Gator. I wonder how many other people have had this problem?”
John Deere GT245 garden tractor equipped
3 Best Buys0 Worst Buys“My 2004 Deere GT245 is my best buy. I’ve been cutting grass with the 48-in. deck and blowing snow with the 42-in. snowblower for 18 years and haven’t had one serious issue. I’ve only done regular maintenance.
“I haven’t had the same experience with my Yard-Man 2-cycle weedeater. It’s impossible to start. After one summer, I tossed it in the dumpster.”
“My 2004 Deere GT245 garden tractor equipped with a 20 hp. engine and 54-in. deck is very reliable. I use it every week to mow our 5 acres of grass and brush on very rough terrain, and the chassis and deck have held up well. The engine has lost some power, but after almost 1,000 hrs. you expect that. I use Gator blades on the deck, which are a huge improvement over the factory blades (www.oregonproducts.com; ph 800 223-5168). Wet grass clippings don’t clump up on them as much.”
“Over the last 30 years I’ve owned at least a dozen DeWalt power tools and they’ve never let me down.
“I like my 2002 Deere GT245 tractor and also my 2001 Deere 4100 HST tractor, which is equipped with a quick-tach frontend loader. Both tractors are great little work horses.
“I bought a LockNLube grease coupler after reading about it in FARM SHOW. Now I no longer have to prime my grease gun.”
John Deere L100 riding mower
1 Best Buy2 Worst Buys“Our 2006 Deere L100 riding mower just keeps on going. We use it every year to cut two acres of lawn.”
Cecil’s had problems with his 2003 Deere L100, 17 hp riding mower equipped with a 42-in. deck. “The deck’s drive belt wouldn’t stay on even when the mower was new. I made three trips to different dealers, but the problem still exists. As a result, I have to raise the deck 1/2 in. higher than I wanted to.
“I also had a problem with the starter. When cranking the engine, at times the starter would bog down and stop. Then I have to turn the engine by hand until compression starts down from top dead center. Eventually the starter got ruined and I had to replace it at my expense.
“After about five years the mower’s seat started cracking and splitting apart.
“On the positive side, the engine has a lot of power and doesn’t use any oil. And there’s plenty of leg room on this mower.”
“My 1991 Dodge 2500 pickup equipped with a Cummins diesel engine just keeps going and going, as does my 1952 Ford 8N tractor. I also like my Drill Doctor drill bit sharpener. It works great and saves money, too.
“My 2002 Deere L100 42-in. riding mower equipped with a 17 1/2 hp engine quit starting without help after one season of use. The dealer said the compression release had broken so they replaced the engine at no charge, but they also billed me $80 for cleaning, greasing, and leveling the mower deck. The engine started okay for a couple of years but now it’s having problems again. I won’t buy another Deere riding mower.”
John Deere LA145 garden tractor
0 Best Buys3 Worst BuysTy’s disappointed with his Deere LA145 garden tractor. “After less than 200 hours I had to change two mower arbors, and the electric clutch and the wiring harness twice. This mower is difficult to get running in the spring and fails at least once mid-season every year. Repairs can take a week which results in lots of downtime. To top it off, the dealer told me, ‘Well, after all, it’s just an entry level mower.’”
Donna’s disappointed with her Deere LA145 riding mower equipped with a 48-in. deck. “We had to replace two belts in the first 6 mos. as well as wheel bearings, and it’s a continuing problem. We’ve discussed these problems with the dealer, but they just say that we bought a ‘town mower’ and that our yard is too big for it.”
Cordavee says his 2009 Deere LA145 riding mower is his “worst buy”. “When the grass is a bit on the dry side it builds up under the pulley and belt covers. So far this hasn’t started a fire, but the way the material is packed in I can’t blow it out. Instead, I have to get down on my hands and knees and pull it out by hand. I could remove the covers from the mower but that wouldn’t be safe, either.”
John Deere LT133 riding mower
3 Best Buys0 Worst Buys“The Deere LT133 riding mower I bought used 10 years ago, equipped with a 42-in. deck, is my best buy. It’s powered by a Kohler 12 hp engine that still doesn’t use any oil.”
“My 1999 Deere LT 133 lawn tractor always starts and has been trouble-free. The blades hold a sharp edge so well I only have to sharpen them once a year.”
On the negative side, “I love Matco tools because they never let me down, but I always had problems with slow delivery of their products. I complained to the company and they told me the problem was with my distributor. So I changed distributors, and now the stuff I order is delivered to my door the same day it arrives at the distributor’s place.”
Doug owns a Westfield 8-in. dia., 51-ft. long grain auger and says it’s his “best buy”. “It has a lot of capacity and moves grain fast. It has been trouble-free.
“My 1999 Deere Lt133 lawn mower works great.”
John Deere LT155 riding mower
3 Best Buys0 Worst Buys“I bought my 1998 Deere LT155 riding mower to resell and make a profit. I cleaned it up and changed the oil and blades, then sold it. The next year the buyer called and said he had mowed his 3-acre lawn once a week without a single problem. This machine was built to last.
“Our 2006 Sears Craftsman 33-in. snowblower has yet to provide one week of reliable service. It snaps shear pins in the drive and auger even when the snowblower doesn’t hit anything, and it also eats up belts. Another problem was that bolts rattled loose because they weren’t properly tightened at the factory. We replaced the shear pins with grade 8 bolts, but they still break.”
“My 2003 Deere LT155 lawn tractor, which I bought used in 2009, has performed À awlessly. I’d recommend it to anyone. It’s built much better than the newer Deere lawn tractors sold at Lowes and Home Depot.”
Mike’s Kubota mini trackhoe, which he bought used, rates as his “best buy”. “I modified it with a hook on the arm so I could move slats on a breeder hen farm. It’s small enough to move around in buildings without tearing up equipment. The slats are 14 ft. long.
“The electronic blade engager on my Deere LT 155 riding mower has gone out twice in four months.”
John Deere LX176 riding mower
2 Best Buys1 Worst BuyLarry’s happy with his 1990 Deere LX176 riding mower. “It doesn’t have an hour meter but I know it has thousands of hours on it yet still runs great. I installed a mulch kit soon after I bought it. The valves had to be adjusted last April, but otherwise this mower has required only normal replacement of belts, blades and deck bearings. No engine or hydro repairs.”
Clint isn’t happy with his 2000 Deere LX176 lawn tractor. “With Deere’s reputation for quality, I had high hopes for this tractor. However, I’ve had nothing but trouble with it. Soon after I bought it, it started running rough and required engine work. Then every few months, something else would go wrong. The steering linkage has broken twice, bearings in the mower deck had to be replaced about six months after purchase, and the deck lift handle has never worked right. There have been numerous other problems, too. The dealer has been very helpful, offering pickup and delivery whenever the tractor had to go to the shop.
“I renewed the tractor’s warranty after two years because of all the trouble I continued to have. As expensive as this tractor was, I had hoped that it would last for years without much trouble, especially during the first few years. It only has about 500 hours on it now, and it’s looking like I’ll have to replace it long before I had hoped.”
On the “best buy” side, he lists his 1984 Mercedes-Benz 300SD diesel sedan which he bought used two years ago with 580,000 miles on it. “The engine is original and has never been overhauled nor had any major work done on it. The automatic transmission was overhauled at the time I bought it. This car now has 617,000 miles on it but still runs great. Living out in the country, I have to drive 52 miles to and from work each day. The diesel engine hasn’t missed a beat since I bought the car. I wonder if it will ever quit. I change the oil every 3,000 miles and never have to add oil. It gets about 25 mpg and is an efficient car for its weight and size. The Germans really had it together with this car. I’ve had nine Mercedes Benz cars in the past, but none with as many miles as this one. In my opinion it’s the best car on the road.”
“Our 1997 Deere LX176 riding mower is built tough and durable. It has a heavy duty mower deck that’s easy to remove.”
John Deere M tractor
2 Best Buys1 Worst Buy“Growing up on a small dairy farm, we had a Deere M as our only tractor…”
“We’re happy with our 1948 John Deere M tractor, which we use with a plow, drag, and cultivator and also to pull logs. Our 1995 Deere LX173 riding mower works good and has required only routine maintenance.”
“I’m restoring a 1947 Deere M tractor that I bought for $400. While disassembling the tractor I came to the conclusion that all the newer tractors lack the quality metals found in these older tractors, and that their workmanship is terrible. The older tractors are made with pride, workmanship, and quality materials.”
John Deere MFWD tractor equipped
2 Best Buys1 Worst Buy“My 2004 Deere 465 All Wheel Steer lawn tractor has great maneuverability and traction, even in heavy snow.
“However, I’ve had trouble with my 1993 Deere MFWD tractor equipped with a powershift transmission. I had to change the transmission and hydraulic filters every 50 hours or so. While shifting from forward into reverse, the transmission would stick in neutral and I would have to shut down and restart the engine, then shift back to park and go. I had all the fluids checked by Deere. They told me to change all fluids and filters and go another 100 hours. After 5,000 hours of use with all these problems, three pumps had to be replaced at a cost of $7,500. Little did I know, the brake shoes were disintegrating and plugging the filter. The company blamed the problem on operator error. Then the tractor caught fire and burned due to an electrical problem. I’m glad it’s gone.”
David’s impressed with his two Deere MFWD tractors – a 1991 4255 and a 1993 4960. “Both have a lot of torque and do a lot of work per gallon of fuel. I’ve had very few problems with either one.”
Jay H. Mennenga, Wellsburg, Iowa: “Our 1988 Deere MFWD tractor is easy to drive and always starts right up. The powershift transmission works perfect. “Our 1990 Deere 4255 tractor also runs perfect. “Our 1989 Ford F-250 pickup is our worst buy. Both doors are bent. The 5-speed transmission is geared too high - the pickup has only 60,000 miles but is already on its third clutch.”
John Deere X485 garden tractor equipped
3 Best Buys0 Worst Buys“My 2006 Deere X485 garden tractor equipped with a 54C deck is my best buy. My wife and I use it to cut about 2 1/2 acres of lawn with no problems. In 2008, we added a no. 47 quick hitch snowblower to the unit. I can move more snow faster and farther with this setup than I can with a 60 hp tractor equipped with a front-end loader and rear-mounted blade.”
A 2004 Deere X485 all-wheel-steer lawn tractor equipped with a 54-in. deck rates as Lyle’s “best buy”. “It replaced my Deere 425 all-wheel-steer lawn tractor and was a good move up. I really like the combination of all-wheel-steer and power steering, which makes this tractor easy to use and to maneuver around objects. It’s an amazing machine and is well built. It was worth every penny I spent on it.”
“My 2004 Deere X485 lawn tractor has about 190 hours on it with no problems. It’s equipped with a 54-in. mower deck which does a good job of cutting grass, even when it’s wet.”
John Deere X540 lawn tractor
2 Best Buys1 Worst Buy“I use my Deere X540 lawn tractor to mow and blade my driveway in the winter. It’s very reliable and always starts in cold weather. My wife enjoys driving it.”
Paul nominates his Stihl RMA 460 19-in., battery-powered push mower as a worst buy. “It did an okay job mowing, but the run time was far short of what the dealer said it would be. It takes 1 1/2 hrs. to fully recharge. I didn’t want to buy another expensive battery to finish the yard. I guess I’ll stick to my gas mower.”
“The power steering and hydraulic deck lift on my Deere X540 lawn mower work great. Lets me give my yard a golf course finish.”
Ryan isn’t pleased with his Arctic Cat DVX 250 4-wheeler. “The design is poor, and it has a lot of transmission problems. It doesn’t stand up well at all. Arctic Cat needs to develop pride in their products again.”
Chad’s happy with his 2006 Branson 4720i utility tractor equipped with a loader and backhoe. “Before I bought it I never knew the company even existed, but 9 years later and after countless projects that would have crippled other machines in its class, it’s still trouble-free and always ready for the next task.”
He’s disappointed with his 2006 Deere X540 lawn tractor. “I made the mistake of paying a lot of money for ‘green paint and stickers’. Since the first day I’ve had numerous problems and have had to take it back to the dealer for repairs under warranty. Every aspect of this machine is troublesome except for the Kawasaki engine. I cringe every time I get this tractor out of my shed because I know it’s going to end up in my garage requiring some petty repair. It goes to show that you don’t always get what you pay for.”
John Deere Z445 zero-turn riding mower
2 Best Buys1 Worst BuyEd likes his Deere Z445 zero-turn riding mower and also his Deere 345 lawn tractor. “No problems with either one. I bought a used Deere 5410 4-WD tractor that’s also a best buy. My 2012 GM pickup has about 80,000 miles on it while requiring only new tires and brake pads. It’s by far the best truck I’ve ever owned.”
On the “worst buy” side, “My Honda string trimmer went through three new carburetors but still lacked power. I finally gave up and bought a Husqvarna trimmer.”
“Last year I bought a new Deere Z445 zero-turn riding mower. It’s my second model, because I liked the first one very much. I used the new mower 6 or 7 times and then wanted to clean the deck and sharpen the blades. I used a chain hoist in my pole barn to raise the mower high enough to do the work.
“I did this many times on my old model with no problems. But this time when I lowered the mower and tried to start it, the engine kicked like a mule and started leaking oil out the exhaust. I let the machine sit a little while and tried to start it again. It kicked and tried to start, but wouldn’t. It almost seemed like the engine was out of timing.
“I called the dealer to pick it up and see if they could find out what was wrong, hoping that it might be covered under warranty. Their best guess was that I had bent something on the engine. We were in the middle of the mowing season and short on time so I resigned to having them install a new engine, which wasn’t covered under the warranty.
“I kept the bad engine and, as I have some engine knowledge, started to tear into it after I got it home. I was at the point where I needed to turn the engine over by hand. I had already removed the flywheel, so I needed to put it back on. I noticed the flywheel bore was smooth, and then I looked at the crankshaft and it was smooth, too. But they shouldn’t have been! I got my punch and hammer and popped out the halves of the flywheel key. That was the entire problem! I put everything back together and it fired right up.
“The dealer couldn’t do anything but apologize, and the company wouldn’t cover any of it under warranty. Now I have a perfectly good 25 hp Kawasaki engine with only 61 hrs. on it. Anyone want this engine? Call me at 765 491-2833.”
“No problems with my 2012 Deere Z445 zero turn riding mower.”
John Deere 1020 diesel utility tractor
1 Best Buy1 Worst Buy“We purchased a new Deere 1020 diesel utility tractor in 1968. We started losing antifreeze soon after we bought it. The antifreeze was in the oil of the 3-cyl. Yanmar engine. The motor had a crack in the block. Deere never recalled our tractor. There were other tractors with the same problem.
“We still have the tractor and have put a new short block in it. The only way we were able to use the tractor was by adding a stop-leak product to the antifreeze. We paid for all the repairs and never heard a thing from John Deere. What a story over all the years.”
“I own 3 Deere 10-20 gas-powered utility tractors that I really like. One was purchased new with a mechanical trip loader that I still use. I bought the other 2 used, and one of them has a hydraulic-operated trip loader. The 10-20 was one of the few tractors of its time that had hydraulic brakes. Two of the tractors have more than 9,000 hrs. on them.”
John Deere 1023E tractor with backhoe
1 Best Buy2 Worst Buys“My 2019 Deere 1023E with backhoe is a very good tractor, but the factory brake recall notice made me wish I’d bought a Kubota. The notice said not to use the tractor and to join a waitlist for a future fix, with no time frame provided. Infuriating.”
“No problems with my 2013 Deere 1023E garden tractor. It’s equipped with a loader bucket, mower deck, and 3-pt. mounted blade. The blade really came in handy last winter with all the snow we had.”
John Deere 105 riding mower
2 Best Buys0 Worst Buys“Five years ago I rebuilt the engine on my 1992 Toyota Tercel for about $1,100. This car isn’t much to look at, but at 47 mpg it looks beautiful to me.
“My Deere 105 riding mower is on its second transmission since the warranty expired, and it’s real noisy.”
“I bought a set of Cinch mole traps because someone had bragged them up in FARM SHOW. I tried them all last summer and used them as instructed, but with no luck at all. I didn’t catch a single mole, even though there were moles all around.
“My best buy is my Deere 105 riding mower. It’s a good value, and my wife loves it.”
John Deere 1240 4-row planter
2 Best Buys0 Worst Buys“My best buy is my John Deere 1240 4-row planter which I bought used in 1978 for $1,600. It was equipped with liquid fertilizer tanks which I removed right away because they obstructed my view. I also had to rebuild the springs and fingers. The stainless steel bands were worn out as well and a year or so later I replaced the shoes. Altogether I spent about $300 to rebuild it. The company still builds similar plateless planters and provides most parts for older models.
“I farm 160 acres and use this planter to sow 80 acres of corn every year. It’s nothing fancy but I beleive the new planters on the market today will do any better. You can buy these planters at local auctions cheap and fix them up. Deere still makes all the parts. They’re worth working on and rebuilding. It’s a good way to keep your overhead down.” Ore. 97060; website: tical and two horizontal – allowing you to
Bryan Moeller, Dayton, Iowa: Bryan nominates his 1975 Deere 12404-row plate planter as his “best buy”. “It’s an excellent planter. The gears and row spacing are easy to change. It has worked almost flawlessly except for a minor problem with the chains that switch the markers, It’s one of the best planters ever built.”
John Deere 1460 disc haybine
2 Best Buys0 Worst BuysA Deere 1460 disc haybine rates as Todd’s “best buy”. “I just hook it onto my tractor and go out and mow hay without having to worry about anything going wrong. This machine requires very little maintenance and really runs smooth. It cuts hay perfectly at speeds up to 10 mph without leaving any stubble. Occasionally a rock will dull the blade, but it takes only about five minutes to replace a blade.”
Tim Schultz, Clintonville, Wis.: “My best buy of all time is my silage bagging equipment. ( /y/ .2?. FARM CHOW - 42 Best & W ( I started with a Silopress XPIII (Silopress, 1915 Floyd Blvd., Box 988, Sioux City, Iowa 51102) and now also use a Uni-press. Both systems make it easy to make excellent quality feed for my 65 dairy cows. They’ve allowed me to increase production and profit per acre from forage while reducing the amount! spend on purchased feed. I had been using cement top-unloading silos and Harvestores, but now they stand empty and unused - I can’t afford to use them. “My 1990 KnightReel Augie 2375 TMR pull-type mixer is also a best buy. It lets me feed all my milk cows once a day in about 45 min, and has allowed me to maintain a 20,000-Ib. herd average while cutting purchased feed costs by 40 to 50%. The TMR mixer and silage bagging systems together have greatly increased my profitability. I'll never go back to my old system. “My 1991 Vermeer 504 Super I baler performed just like I expected and makes nice tight bales. The dealer spent plenty of time with me to make sure I knew how to use it I'm completely satisfied. “My Landoll Tilloll implement provides true one-pass spring tillage. Really saves time and fuel. “My Deere 1460 disc mower-conditioner is a best buy. My wife can use it to cut hay at 7 to 8 mph without plugging it up. I’ve tried my hardest to plug it up, but I can’t. If it lasts as long as it’s supposed to, it'll eam ‘best buy’ status. “My worst buy was a 1990 Case-IH Maxxum 5120 tractor. It caused me lots of grief before I traded it in on a Deere. In “If it lasts as long as it's supposed to, it'll earn 'best buy' status.” fairness to Case-IH, it was one of the first models built and I understand that most of my problems have been corrected in later models or by recalls. However, I still feel it has too much electronic equipment for a farm tractor. The 3-pt. took too long to lower for a job like cultivating and trim pieces kept falling off. In cold weather the engine would start fine, but the tractor wouldn't move. The clutch works off electric switches somehow. The dealer bent over backwards to solve the problem but had no luck. I’d recommend the dealer to anyone, but a Maxxum only to my enemies,”
John Deere 158 front-end loader
1 Best Buy1 Worst BuyDean’s pleased with the handling, power, efficiency and durability of his pair of Deere 4630’s, a 1974 and a ‘75 model. But he wishes Deere made a reasonably priced side exhaust kit and add-on front wheel assist for the tractors.
On the negative side, Dean’s unhappy with his 1982 Deere 158 front-end loader. “It isn’t quick-tach and there’s no good way to modify it without cutting it apart, spreading out the arms, and building new mounting brackets. Basically, you’ve got to start all over.”
Duane L. Rodine, Polk, Neb.: “We use it for something every day,” says Duane, impressed with his Deere 158 loader. “We've seen other brands where the joints are worn oval, but that’s not a problem on this one, It requires little maintenance,”
John Deere 175 riding mower
2 Best Buys0 Worst Buys“Of all the tractors we’ve ever had on our farm, the handiest and most dependable has been our 1960 Ford 661,” says Dick. “It’s easy to operate, handle and service and is equipped with a two-stage clutch and power steering.”
Dick’s also impressed with his 1990 Deere 175 riding mower. “We’ve mowed hundreds of acres over the years and basic maintenance has kept it running like new. The motor and transmission have been completely trouble-free.”
He also liked the deal he got from Harbor Freight after he broke the handle on a new ball peen hammer the first time he used it. “The company not only replaced the broken hammer, but sent me their entire five-piece hammer set free-of-charge.”
Lewis Pittmann, Oakesdale, Wash.: Lewis is pleased with his Deere 175 riding lawn mower, but says it could use one improvement. “They should add more weight on the front end like we did because the front end is too light. It’s a problem when the grass bag gets full and you're on hilly slopes.”
John Deere 1750 corn planter
1 Best Buy1 Worst BuyHe’s had good luck with his 2002 Deere 8310 tractor. “It’s a dream to drive. I bought it out of Arkansas sight unseen after finding it online. It has a lot of power and is fuel efficient. I can work an acre of ground pulling an 18-ft. Krause disk and a packer, while using only a gallon of fuel. It’s a nice piece of equipment.
“My worst piece of equipment is a new Deere 1750 corn planter. The first time we pulled it in the field most of the drive pins on the shafts fell out. Apparently when it was assembled someone didn’t put the cotter pins in place. The dealer went over it and found several loose bolts. During the first 300 acres of planting the drive clutch went out and was replaced under warranty. We then planted another 200 acres before a second clutch went out. This time the dealer wouldn’t replace the clutch under warranty.”
“My 1998 Dodge quad cab shortbed pickup equipped with a Cummins diesel engine is my best buy.
“My 1998 Dodge pickup has a lot of power and is fuel efficient. It also rides nice.
“My Deere 1750 Max-Emerge Plus conservation planter does a nice job of planting and is easy to maintain. No problems.
“My Ford New Holland bi-directional tractor is a pleasure to drive. I use it to oper-says Jack, pleased with his Deere STX 38 riding mower.
“My Deere TRS 21 snowblower has better balance and snow throwing power, in both light and wet snow, than a Toro 2000 snow-blower.”
John Deere 1760 12-row planter
2 Best Buys0 Worst BuysJoe’s the satisfied owner of a 2013 Deere 1760 12-row, 30-in. planter. “I ordered this planter with finger pickup corn meters instead of vacuum units. The planter’s adjustable bean meters work well, and the 3-bu. seed boxes save time in the field. I can plant a lot of acres in a day.
“I like my 2001 Massey Ferguson 6280 tractor except for the cheap European hydraulic couplers and the dash electronics. Also, many of the company’s replacement parts are priced too high. For example, it costs $200 for a toolbox, $120 for a hydraulic filter, $46 for an air filter, $500 for a starter, and $1,600 for a rear fender. Instead, I save money by buying most of my parts on the internet.”
A 2012 Deere 1760 12-row planter rates as Joe’s “best buy”. “I ordered this planter with finger pickup seed units and 3-bu. seed boxes. Then I mounted trash whippers, spiked closing wheels and drag chains on it. Everything on this planter works great.”
John Deere 1780 split-row
2 Best Buys1 Worst Buy“My best buy is a Deere 1780 split-row used for 11 rows of 15-in. soybeans. I…”
“Through the years, I’ve owned several Deere planters including a 494, a 494A, a couple of 7000s, a 7200, and currently a 1780 set up for no till. I’m not going to declare the 1780 a best or worst buy.
“On the best side, it does an excellent job of placing seeds in the ground. I’ve successfully planted in muck and hard clay, and planted green into a cover crop.
“There are four areas, however, where I think the Deere engineers should be flogged: the marker fuse system, the planter meter drive, the transport link system, and the negative tongue load. I’ll expand on only one, the negative tongue load.
“If the transport links are in place and the planter is separated from the tractor, the tongue will fly up, and unless care is taken, you’ll be wearing your acorns for a beard. Due to the strong minus tongue load, it’s almost imperative to use a tractor and hook up the hydraulic to move the planter around.
“Furthermore, the minus tongue load makes this a very unpleasant implement to transport. The jerking and jarring are almost continuous. Any road input that the planter encounters is transmitted to the tow tractor and operator. And, with no tongue load, the planter kind of has a mind of its own for where it wants to go. It doesn’t track well behind the tow tractor.
“I’ve implemented my personal hillbilly fixes for the minus tongue load and the transport links, the marker system and meter drives are a work in process.”
John Deere 185-hydro lawn tractor
1 Best Buy1 Worst BuyGene Eckmann, Bloomfield, Neb.: “My 1989 Deere 185-hydro lawn mower is my all-time worst buy. bought it used four years ago for $2,500. After a short period of time it started using a quart of oil every time we mowed. The 17 hp engine was completely overhauled, but then it wouldn't start. It mows the lawn unevenly, leaving strips between the blades. The front axle assembly fell off and it took an entire day to put it back on because two small bolts were located in a hard-to-reach position, The next time we used it, the engine leaked a quart of oil and started making a clanging noise like it was going to throw a rod. I'm disappointed with this product and feel that the cost of parts and repair work is too high. I plan to replace it. “My best buy is my 1973 Ford F-100 pickup equipped with a 390 cu, in. engine, It's on its second engine and runs like a charm, It’s the most reliable vehicle on our farm.” John D, Parker, Gates, N.C.; “Llike my Deere 4230 tractor. It has 10,000 hours on it and the engine has never been overhauled.”
Jerry J. Schleck, Kenyon, Minn.: “My 1990 Deere 185 Hydro lawn tractor is a best buy. It has a 38-in. deck and hydrostatic drive and does a nice job of mowing. My Deere 110 lawn tractor is also a best buy. It still works good after 16 years with few repairs.”
John Deere 2038R compact utility tractor
2 Best Buys0 Worst BuysHoward is pleased with his Deere 2038R compact utility tractor, which has a 220R loader and a 60D AutoConnect™ mower deck. “It’s so easy and fun to operate. It does everything very well and has many nice features. The AutoConnect deck attaches and detaches easily, and the underside of the deck stays exceptionally clean.”
“My best buy is a Deere 2038R compact utility tractor I purchased new in late 2017. It has plenty of power and is large enough to be able to safely do many different tasks yet is small enough to be very maneuverable with the auto-connect mower, loader or 3-pt. attachments. It’s fun and comfortable to operate and has many neat features. I highly recommend this tractor.”
John Deere 214 riding mower
2 Best Buys0 Worst Buys“My 1978 Deere 214 riding mower is my best buy. I use it with a rototiller, lawn mower, and snowblower. Over the years I’ve only had to replace two rear wheel bearings and seals and a set of belts. It’s an excellent machine.”
David Simpkins, Connersville, Ind.: David’s satisfied with his Deere 214 riding lawn mower but says it could use a couple improvements, “I wish it had individual rear wheel brakes and a differential lock.”
John Deere 2155 tractor
2 Best Buys0 Worst Buys“I’m very pleased with my peppy 55 hp. 1992 Deere 2155 tractor. It has 4-WD and a loader. I switched the loader over to a skid steer attachment so it’s quick-attach. It has a 3-cylinder German-made engine. The clutch is tight, and the brakes work very well. It’s still a tight little tractor even though it has 4,000 hrs. on it.”
P.A. Lovejoy, Elizabeth, Penn.: “My 1988 Deere 2155 tractor is maneuverable, reliable, and thrifty. do more work with it in one week than I did in one month withany previous tractor.”
John Deere 216 riding mower
2 Best Buys0 Worst Buys“My 1985 Deere 216 riding mower is still running good. It has gone through 3 batteries and 3 sets of mower blades, as well as 4 belts. Otherwise, it has required no major repairs.”
Robert White, Chrisman, Ill.: “The Deere 216 platform on my combine performs much better since I installed May Wes slippery shoes on it. It’s a best buy (May Wes Mfg., Box 33, Gibbon, Minn. 55335). “My May Wes double cut sickle bar greatly reduces header losses. “My Ingersoll Rand Air Pro Air compressor, model IRSE6VA, is a worst buy. It keeps blowing a head gasket mounted between the reed plates, and to get a $3 gasket you have to buy a $40 reed plate replacement kit.” Texahana Farm, Fredricksburg, Texas: “Our Deere 425 offset disk docs a perfect job in tight soils and lets me plant right behind it. I haven't spent one cent on maintenance.”
John Deere 220 stalk shredder
2 Best Buys0 Worst BuysDick’s the owner of a 1997 Deere 220 stalk shredder. “It works well and does a nice job. It runs much smoother than our old Deere 27 model. It does take a lot of power to pull it, though.” On the “worst buy” side, he lists his 1997 Shurlock Jr. roll tarp that’s designed to fit gravity wagons and grain carts. “We installed it on our Ficklin grain cart and it’s a joke. The end flaps are designed to be held down by tarp straps. However, when the straps are unhooked they catch on everything as the tarp is being rolled up. And when I try to unroll the tarp, the straps hook each other so I have to crawl up on the wagon to unhook them. Believe me, you only try this once.”
David nominates his Deere 220 disk as his “best buy”. “I use it with filler blades and a tine harrow and it leaves the field as level as any disk I’ve ever owned. It also does a good job of cutting into the soil.”
John Deere 2320 4-WD compact tractor
2 Best Buys0 Worst Buys“It’s a nimble little tractor that has surprised me many times with its performance,” says Jason about his 2007 Deere 2320 4-WD compact tractor. “It’s powered by a 24 hp, 3-cyl. Yanmar diesel engine, which has plenty of torque and is easy on fuel. The 4-WD is easy to engage and has gotten me out of more jams than I can remember, especially when I’m using my 3-pt. mounted snowblower. I use it with a 62-in. drive-over mower deck, which is easy to install and does a flawless job of mowing grass whether it’s wet or dry.
“If I want I can use the tractor’s twin-touch hydrostatic pedals at the same as the individual wheel brakes, since they’re on opposite sides. I’ve used other brands of compact tractors where the pedals are all on the same side. It only works to use them when using cruise control. Deere was definitely thinking when they designed this tractor. I know it’s only a Yanmar in Deere skin, but it’s worthy of the Deere badge.”
Richard’s the proud owner of a 2006 Deere 2320 4-WD tractor equipped with a 24 hp diesel engine and hydrostatic transmission. “It handles a 5-ft. Bush Hog and a 6-ft. Land Pride rear discharge finish mower with ease. The 4-WD makes it very sure footed on side hills. The hydrostatic drive transmission allows me to drive slowly forward while keeping my 5-ft. rototiller turning at high speed.”
John Deere 235 riding mower equipped
2 Best Buys0 Worst Buys“I like my 1982 Massey Ferguson 245 tractor equipped with a 42 hp diesel engine. It has a lot of power for a garden tractor and I like the power steering. It will pull any kind of 2-row equipment.
“My 2001 Deere 235 riding mower equipped with a hydrostatic transmission is a best buy. It mows evenly and is easy to operate.
“My 1990 Troy Built garden tiller is the best on the market.”
William Olson, Granada, Minn.: William nominates his John Deere 235 disk as “best buy”. “I've had several Deere disks but the 235 is really a good machine, It cuts well and is made to take rough use.”
John Deere 2350 4-WD cab tractor
1 Best Buy1 Worst BuyHarvey’s impressed with his 2006 E-Z-Go 350 utility vehicle. “It has plenty of power and a handy dump bed in which I haul all my firewood. It’s easy to get around on the farm with this rig and it works great for doing chores.
“My Deere 2350 4-WD cab tractor I bought used leaks hydraulic oil from one end to the other. The seals in the 3-pt. lift arms last only about six months before they start leaking again. I had to install a new heater and fan and replace all the air conditioning hoses and valves. It also needed a new water pump and hoses, a new starter, new hydraulic clutch cylinders, and a new engine oil cooler.”
John likes his New Holland 1620 HTS 4-WD tractor equipped with a front-end loader. “It’s reasonably priced and easy to use. The loader has a lot of reach and speed.
“My all-time best buy is my 1983 Deere 2350 4-WD tractor. It has about 7,500 hours but is ready for more work. I use it to mow about 4,000 miles of highway roadsides every year. In winter I mount a blade on front and a snowblower on back.”
John Deere 2350 MFWD model equipped
2 Best Buys0 Worst Buys“It’s the most reliable tractor I’ve ever owned,” says Tom about his Deere 2350 MFWD model equipped with a front-end loader. “It has about 10,500 hrs. on it, but the engine still doesn’t use any oil unless it’s working very hard. I use the loader for doing logging work and for general chores. The clutch was replaced and the pto was rebuilt at about 9,000 hrs., and the hydraulic pump was rebuilt at about 9,500 hrs.”
Cecil Pikey, Scott City, Mo.: Cecil’s impressed with his Deere 2350 MFWD tractor which he bought used, “It had low hours and had been well maintained. Front wheel drive is very helpful for loader work.” Thomas E, White, Leonard, Texas: “My 1991 MTD Shp rototiller runs and tills extremely well. The tines go both forward and backward and work well for breaking new ground.”
John Deere 2355 4-WD tractor equipped
2 Best Buys0 Worst BuysHe’s the satisfied owner of a 1990 Deere 2355 4-WD tractor equipped with a Deere 245 front-end loader. “This tractor has a cab, air conditioning, and a heater so it’s comfortable to use all year long. I use it with a 3-pt. bale wrapper to wrap round bales. I use a bale hugger on front of the tractor to move bales to the side of the field. During the winter I haul the bales to a feedlot which is often muddy and icy. I also use this tractor doesn’t have a cab - the left side dash cowling has to be removed first so that you can disconnect the clutch spring. But in order to do this, first you have to remove the lower window on the left side of the cab.
“The door hinges are weak and the door seals aren’t very effective. The engine oil fill is poorly located, and I have to practically drip oil in a little at a time in order to keep it from overflowing out the fill spout.
“Considering what this tractor costs, it’s disappointing to have to deal with a cab that’s this poorly designed. I believe these cabs were built outside the company, but so what? I think my four-year-old child could do a better job. The cabs on the company’s 20 series tractors have a different design and look much better. However, after the experience we had we’ll be taking a closer look at other tractor brands next time.”
“I’m well satisified with my Deere 2355 4-WD tractor equipped with a Deere 245 frontend loader. It’s one of the best I’ve ever bought. It has a lot of power for its size and turns short, and the front wheel assist provides extra pulling power. We use it for spraying, cutting hay, etc. The hydraulic system has a lot of capacity. I mounted extra working lights on it.”
John Deere 240 skid steer loader
2 Best Buys0 Worst Buys“It’s the best machine I’ve ever bought,” says Johnny about his 2003 Deere 240 skid steer loader. “I use it in my fencing business to dig post holes. It’s compact, nimble, and fuel efficient, and also has a lot of power.”
Kevin Shopher, Mexico, Mo.: Kevin's happy with his 1989 Deere 240 riding lawn mower equipped with a 48-in, deck, but says it has some problems. “The standard transmission shifts smooth on-the-go and the 14 hp Kawasaki engine has plenty of torque. However, the two-piece belt shields on the mower deck tend to catch grass. The oldone-piece style kept the drive beltcleaner and running cooler which resulted in longer belt life and less maintenance. I wish the headlights would shine on the mower deck Ray Rose, Gadshill, Ontario; Ray's had good luck with his 1989 Deere 2555 tractor, “It starts easy, shifts smooth, is fuel efficient, and a pleasure to drive. It’s got 500 hours with no major problems. “We've also had good luck with our 1985 Deere 330 baler. It makes neat, solid bales under most field conditions.”
John Deere 255 zero turn riding
2 Best Buys0 Worst Buys“My 2013 Deere 255 zero turn riding mower works fast and has reduced my mowing time from 15 hrs. to 5 hrs.”
Henry Klooster, Tavistock, Ontario: Henry nominates his Deere 255 2-WD tractor as “best buy”. “It’s a handy, fuel efficient tractor with plenty of power, It seems to be holding up just as well as the tractor I traded in - a Deere 2120. We really liked that one, too.”
John Deere 2755 MFWD tractor
2 Best Buys0 Worst BuysWayne likes his 1988 Deere 2755 MFWD tractor and Deere 245 front-end loader but says it has nevertheless had some problems. “It has more than 5,700 hours but ever since the warranty expired all I’ve had to replace or repair was the clutch at 4,960 hours. It’s a real best buy. However, like the Deere 2030 and 2640 tractors that I owned before, it’s noisy due to fuel injectors and hydraulic pumps, etc., so I always try to wear hearing protection. The hand parking brake won’t hold back any more than just the tractor itself. The loader’s self-leveling fork and 7-ft. bucket are quite light duty - I have to be careful not to use them like a bulldozer or they’ll break. However, they work fine in snow and silage.”
Stanley Klausch, Watertown, Wis.: A 1990 Deere 2755 MFWD tractor rates as Stanley’s “best buy”. “It runs well, is fuel efficient, and has as much pulling power as a much bigger tractor. “My 1987 Dodge Dakota L.E. pickup is a best buy. It has 79,000 miles and I just installed the first set of replacement tires. The old ones were Goodyear Vectors. It gets 26 to 27 mpg loaded or empty.”
John Deere 2955 2-WD tractor equipped
2 Best Buys0 Worst BuysDwayne Nelles, Wapella, Sask.: “It has a good cab and the foot throttle makes it easy to operate,” says Dwayne, whose 1990 Deere 2955 2-WD tractor equipped with an Allied 700 front-end loader has nevertheless had some problems. “The rear window doesn’t close tight and the gear shift levers are noisy. Sometimes the viscous fan doesn’t cut in like it should. There’s no oil pressure gauge or pyrometer, and I wish ithad a full power shift transmission.”
Martin Keem, Arcade, N.Y.: “It’s a good middle-sized tractor with plenty of power and it handles great. However, I wish it was equipped with a powershift transmission and Firestone tires,” says Martin, who otherwise is pleased with his 1990 Deere 2955 2-WD wactor. “I use it for planting, cultivating, hauling hay and silage wagons, spreading manure, and raking hay.”
John Deere 300
2 Best Buys0 Worst BuysVirgil describes his 1972 Deere 300 as “the best tractor I ever owned. I bought it new along with a snowblower, mower, tiller, and dump cart. I always followed the maintenance schedule in the owner’s manual, so I was able to use the tractor for 17 years without any major breakdowns.”
Jake Herzog, Jr., Slingerlands, N.Y.: A 1991 Deere “Gator” 4 by 2 equipped with optional dump box is Jake's best buy. “This machine replaced a trailer I used to pull behind a lawn tractor and a4-WD farm pickup. We use it for hauling stones from fields, firewood to the house, earth around the place, etc. It’s also great transportation to and from our pond. “Our 1993 Grasshopper 718 does everything the company promised. It reduced mowing time by 30% over my Deere 300, which had comparable hp and deck size. The lever-adjusted deck height is a big advantage over comparable front-deck mowers.” A 1989 Ford F250 heavy-duty pickup is Jake’s worst buy. “The 351 cu. in. engine gets worse gas mileage than the 460 engines we use in our other trucks. Also, because the anti-lock brakes have a tendency to malfunction, we've had a few “near misses.’ The dealer says there’s nothing wrong.”
John Deere 300 B backhoe loader
2 Best Buys0 Worst Buys“I bought a used 1967 Deere 300 B backhoe loader in 1978 and have put more than 6,000 hrs. on it. It works great. However, I’ve stopped buying parts from our local Deere dealer due to their high cost. I can buy the same parts online for 40 to 60 percent less.”
A 1985 Deere 300B industrial backhoe, bought used three years ago, rates as Larry’s “best buy”. “It only had 1,282 hours on it when I bought it. My neighbor also has two 1970’s model Deere industrial backhoes. We have a complete set of manuals for each machine. Deere’s technical writers were really good. These machines are simple to fix and parts for them are available at all ag and industrial dealers.”
John Deere 3022 tractor
2 Best Buys0 Worst Buys“My 2008 Deere 3022 tractor has run very well without any major problems since I purchased it. We got our money’s worth.
“My worst buy products recently are Atomic Beam security lights and flashlight. The commercial for the flashlight showed it dropped from a helicopter without a scratch but mine fell off the bumper of my truck onto the gravel and the lens came out. The Atomic Angel security light only worked until the first heavy rain, when it filled up with water and never worked again.”
“My 2008 Deere 3022 tractor runs great and has been mostly trouble-free.”
John Deere 3025E tractor
2 Best Buys0 Worst Buys“It’s a great tractor that does everything I ask of it,” says Donald about his Deere 3025E.”
“My 2018 John Deere 3025E tractor has performed without any problems or issues. Plenty of power and it has a nice loader.”
John Deere 3038e tractor equipped
2 Best Buys0 Worst BuysTom nominates his 2010 Deere 3038e tractor equipped with a Deere 305 front-end loader as his “best buy”. “This tractor is fuel efficient and has been trouble-free. No leaks anywhere. I use the tractor around our farm for mowing, spraying, and moving trees.
“My 2014 Dodge Ram 1500 4-WD Laramie pickup has had numerous company recalls. The air suspension warning light comes on during cold weather, but the dealer says I’ll just have to live with it. The rear main oil seal started leaking at about 12,000 miles and had to be replaced. The pickup’s heated seats take a long time to warm up, and the cab heater is the worst I’ve seen. The pickup has just over 17,000 miles on it.”
“It’s a great tractor with a lot of power, but it has some problems,” says Delfina about their 2013 Deere 5100E. “The front end is too high to see the rows in the field, and the steps are too high to climb. Also, the door on the cab is difficult to open.
“My Deere 3038E utility tractor works great, but whenever I use it to shred weeds or operate a tiller I wish it had a cab.”
John Deere 3150 tractor
0 Best Buys2 Worst Buys“My worst buy is my Deere 3150 tractor. It has the worst transmission and hydraulics I’ve ever seen. A Deere mechanic told me he’s seen these problems before. This tractor is a piece of junk and is doomed to fail. The company doesn’t care what it costs to maintain the tractor or what I lose in trade-in value. “The brakes on my 1989 Chevrolet 3/4-ton pickup don’t always work right at low speeds. The company admits there’s a problem but, like many other problems, the almighty dollar dictates safety. I’m afraid to sell it to someone or even to trade it because I don’t want anyone getting killed. I guess I’m stuck with it.”
Chris Kimmel, Shelocta, Penn.: A 1990 International 8530 B-Line baler rates as Chris’s “best buy”. “It has a lot of capacity. Wecan easily make 1,000 bales a day, 2,000 if we go fast. It makes a dense, square bale that’s easy to sell, The wide pickup makes it easy to bale wide windrows left by our combine. “My worst buy is my 1988 Deere 3150 tractor equipped with a front-end loader. The tractor worked fine until the starter wentoul Ittook a special wrench to remove itand the dealer had to wait a week to get il. Then O-rings went bad on the clutch and 3pt. The parts weren't expensive but they’re located in the middle of the tractor where they're hard to get at. The mechanic didn’t like working on this tractor at all.”
John Deere 322 garden tractor equipped
2 Best Buys0 Worst Buys“My 1992 Deere 322 garden tractor equipped with a water-cooled Yanmar 3-cyl. engine has 3,300 hrs. on it but still doesn’t use any oil, even though I’ve used this tractor hard. I bought another used 322 model with 642 hrs. on it as a spare 2 years ago, and now use both tractors nearly every day.”
William Dawe, Lehman, Penn.: William's had good luck with his 1992 Deere 322 lawn and garden tractor. It’s equipped with a 3-cylinder water-cooled gas engine, hydrostatic drive, and 38-in. deck. “We use itmainly to mow twocemelaries. The engine has plenty of power and the hydrostatic drive works well for mowing around obstacles and for cutting tall weeds and grass.” On the “worst buy” side, William’s had problems with his 1985 International Cub Cadet riding mower equipped with a 2cylinder air-cooled gas engine and 3-speed transmission. “I like the deck better than the onc on Deere’s riding mower, but the clutch cracked in three places and came flying out from underneath the tractor. This happened a total of eight times - three times in one summer, I was told that the problem has been solved on new models. It cost us a lot of downtime.” George W. Herbert, Jr., Brentwood, Tenn.: George is impressed with his Vicon 4-wheel hay tedder. “I don't know how we cured hay before this tool came along. It really speeds up the hay drying process. I'd recommend it to anyone.”
John Deere 325 lawn tractor handles
2 Best Buys0 Worst Buys“My 2000 Deere 325 lawn tractor handles well and turns short, and the engine is evenly matched with the mower deck. It’s a comfortable machine to operate and is my best buy.
“My 1999 Chevrolet 1500 pickup is my worst buy. It has had a long list of problems. All the windows have had to be replaced; the engine leaked oil out of the valve covers; the transmission had to be replaced at only 60,000 miles; the driveshaft went bad; the driver’s seat broke when the pickup was still brand new; and the back seat supports had to be replaced. Also, the engine tends to stall whenever I start moving the pickup forward.”
He nominates his 1996 Ford F-350 crew cab pickup equipped with a Power Stroke diesel engine as his “best buy”. “It rides good and gets 15 to 22 mpg. No problems after 25,000 miles. “I really like my 1996 Deere 325 lawn tractor. It’s powered by an air-cooled 17 hp engine that works great. No problems.”
John Deere 330 riding mower equipped
2 Best Buys0 Worst Buys“My 1986 Deere 330 riding mower equipped with a 16 hp Yanmar diesel engine is my best buy. The engine has a lot of power and can pull our large homemade wood splitter up some good-sized hills with no problems. It has a lever-action hydrostatic drive that gives us infinite speeds and doubles as a cruise control when we find the speed we want. Hydraulic lift makes it easy to raise the deck. The machine has a 4 1/2-gal. fuel tank so we can cut our large yard three to four times before we have to refill the tank.”
Keith Brown, Port. Crane, N.Y.: “I'm pleased with the machine in general,” says Keith, who's 1988 Deere 330 round baler but he has one complaint. “It rolls bales so tight that I have to use an axe to cut them apart so I can feed them in my barn, I tried using a chain saw, a hand saw, and a oneman manual saw, butnone of them worked.”
John Deere 3970 forage harvester
2 Best Buys0 Worst BuysJohn’s happy with his 1999 Deere 3970 forage harvester. “It seems to take less horsepower, is easier to sharpen the knives, and hasn’t required a lot of maintenance. It’s equipped with a two-speed blower that takes less power in corn silage.
“My worst buy is my Case-IH MX 200 tractor. It has many features on it that don’t work well. For example, the pto wouldn’t start easy which caused bolts to shear. The steel pipe under the cab vibrated and broke off. It should’ve been made from rubber. Both hydraulic cylinders on the 3-pt. hitch leaked. The company should’ve field tested this tractor more extensively before putting it on the market.”
Keith Schmitz, North Collins, N.Y.: “My best buy 1989 Deere 3970 forage harvester doesn’t take much horsepower considering its large capacity. It’s competilively priced, but still out of line with the price of milk.” Keith is disappointed in Surge rubber products made for milking machines. “They don’t have the elasticity they once did.”
John Deere 3-pt mounted rototiller
1 Best Buy1 Worst BuyA Deere 3025E 4-WD loader tractor equipped with a hydrostatic transmission rates as Michael’s “best buy”. “It has a lot of power and traction, and the hydrostatic transmission is easy to operate. The loader has plenty of lifting power and the controls for it are easy to operate. The 3-pt. controls are also easy to operate.
“My Deere 3-pt. mounted, 55-in. rototiller leaves a smooth, level seedbed.”
“My Deere 3-pt. quick hitch saves a lot of time hooking up implements and is safe to use. It eliminates the need for my wife to help me hook up implements. “MyDeere 2280 self-propelled swather is my worst buy. It was in the shop for repairs two summers in a row. We had to spend about $10,000 on repairs which is about as much as we originally paid for it. All the downtime we had last summer put us way behind schedule. At one point our frustrated Deere repairman discovered that there were three 2280’s in shops along the I-80 interstate highway in our area.”
John Deere 4000 diesel tractor
2 Best Buys0 Worst Buys“I like my 1972 Deere 4000 diesel tractor. The later model 4000 to 4020 tractors were some of the best tractors ever made. They’re simple, powerful and dependable.
“I’m happy with my Deere 1025R subcompact utility tractor equipped with a frontend loader and mower.”
“I bought my 2004 Toyota Corolla because of its fuel efficiency – it gets 37 mpg. This car is built with quality and has exceeded my expectations in every way.
“My 1972 Deere 4000 diesel tractor equipped with a Westendorf front-end loader is a best buy. I’ve used it almost every day for 33 years, yet it has never been overhauled.”
John Deere 4005 tractor
2 Best Buys0 Worst Buys“My 2012 Deere 4005 is an excellent tractor in all respects, except that it has an uncomfortable seat and an accelerator pedal that’s often in the way when I try to apply the brakes.”
“My 2013 Deere 4005 tractor has plenty of power, steers easy, and is easy on fuel. However, it could use a better seat and the foot throttle should be relocated because it gets in the way when braking.
“My 2012 Swisher walk-behind Trim-N-Mow is poorly designed. It’s equipped with a cheap Briggs & Stratton engine and an inefficient air filter. There’s no way to drain the oil except through the filler neck and by upending the entire mower. Also, grass tends to pack around the drive pulley.”
John Deere 4040
2 Best Buys0 Worst Buys“I really like my Deere 4040. It performs well and is handy to use around our yard.”
Jason Starnes, Salisbury, N.C.: “It’s a very reliable tractor,” says Jason about his “best buy” 1981 Deere 4040. “I really like how ithandles and the quick response of the hydraulic system. The cab is the best on the market. Ithas plenty of room, a comfortable seat, excellent radio, great air conditioner, and outstanding visibilty. I'd buy another Deere if I were in the market for a new tractor.”
John Deere 4044M tractor
2 Best Buys0 Worst BuysA Deere 4044M tractor with D170 loader, iMatch Quick-Hitch, and pallet forks is a “best buy” for John. “My 440M is a great all-around workhorse. The pallet forks save my back, and the Quick-Hitch makes hooking up implements much easier.”
John also likes Stihl products. “Stihl saws have been a ‘best buy’ since I bought my first one while still in high school in 1977. I have an 039 that I bought in the mid-1990’s that is still going strong. Our battery-powered leaf blower is a huge improvement over the gas-powered ones.”
On the negative side are drill bits by DeWalt and Milwaukee. “If you are only drilling wood, they are acceptable. For drilling even thin steel they are so brittle they break constantly. They don’t begin to compare to drill bits made 20 to 30 years ago. If I wanted cheap junk, I would buy bits at Harbor Freight. I’ve actually had better luck with their cheap bits than I’ve had with the name brands. At least if they break, I expect it.”
John likes his 2015 Deere 4044M tractor equipped with a hydrostatic transmission and model 170 front-end loader. “It’s comfortable to operate, has a lot of power, and starts easy in winter. I use it every day on my acreage. On the downside, there’s no way to know when the loader bucket is level.”
John Deere 4050 MFWD tractor equipped
2 Best Buys0 Worst Buys“I bought my Deere 4050 MFWD new in 1983. It’s served me very well all these years. I’ve never touched the engine, and it’s only needed minor repairs. It now has over 10,000 hrs.”
“I’m well satisfied with my 1987 Deere 4050 MFWD tractor equipped with a Deere 260 front-end loader. “I really like the front wheel drive and the power shift transmission. The front wheel drive has gotten me out of many tough places. This tractor is 14 years old now, so I suppose the company has made many improvements on the newer tractors in this power class. I know tractors are a lot higher priced now. The loader works okay, but the mounting brackets for this tractor are built too light.”
John Deere 410 baler
1 Best Buy1 Worst Buy“I must hold the world record for breaking gearbox input shafts on a Deere 410 baler. I’ve owned this baler since it was new and have broken three shafts. After installing a steady bearing as close as possible to the clutch assembly, I discovered the problem had been caused by the improper machining of the clutch assembly. It had a wobble that caused it to wear.
“I found another clutch setup at a salvage yard which is closer to true, but not perfect. It was interesting to see that the original clutch friction plate had less wear than the one on my salvage part so I didn’t abuse it.
“Other complaints: the chain drive to the upper belt rollers was too light. I’ve replaced the single row no. 60 chain with a double row chain which has worked well. The upper belts have never tracked well. Why isn’t there an adjustment similar to a combine pickup? The 12-in. belts wore too quickly so I bought a set of four 8-in. belts, which should get away from the short lacing life caused by chaff build-ups behind the wider belts.
“Why isn’t there a rotating belt guide on the upper belts just above the compression roll, similar to the one on the lower belts? Forage gets between the side plates, pushing the outer belts into the center.
“When one lays out the extra money for green paint, one expects the engineering to be done already. If I could afford it, this baler would be treated to a paint job to match the color of the rims.
“Why do I keep this embarrassment to the engineering profession? Well, I’m scared to buy something else in case it’s worse. And to be truthful, this baler has made a lot of good bales over the years.”
Jim owns a 1988 Case-IH 7140 tractor. “It has a lot of comfort and power, but I wish the power steering system worked better so that it would be a little easier to turn. One problem is that I don’t have a dealer close by - I have to drive a long way to get parts. I use a Deere 410 backhoe on it and am well satisfied with it. However, I wish I could raise it higher - I can stack bales only three high.”
John Deere 4110 small frame compact
1 Best Buy1 Worst Buy“I have several best buys. I received two ‘headlamps’ as Christmas gifts last year. I never thought that such a simple item could be so useful when working in poor light conditions such as under machinery, in cellars, or even outside after dark. I don’t use them every day, but they sure are handy when needed. I recommend getting one or two.
“A Deere 4110 small frame compact tractor that we purchased from my father-in-law’s estate has been truly outstanding. Although the 410 loader doesn’t have a high lift height, it’s become a favorite machine for light-duty rotary mowing and other barnyard chores. The two-range hydrostatic transmission works well, and the fuel consumption can be measured in quarts per hour. It’s not a big tractor, but it can do a lot of work.
“My well-used Deere 5300 2-WD tractor purchased with more than 2,600 hrs. on it has been a money maker for us. It’s used primarily for raking, tedding, spreading fertilizer, rotary mowing, and general yard work. We haven’t had any repairs beyond yearly maintenance other than replacing some linkage on the hydraulic SCV valves. The 12 by 12 reversing transmission with a positive park-lock provides plenty of speed selection and fuel economy is excellent. I think later models have a slightly redesigned operator’s platform that provides more room for the operator as this one is somewhat on the tight side. It’s simple, effective, and has no computers.
“For package quantities of specialized fasteners, I’ve found that McMaster-Carr is the place to go (www.mcmaster.com). An excellent website makes it easy to select the product you need. They offer a tremendous variety of industrial supplies.
“For more common fasteners such as bolts, nuts, etc., I use The Nutty Company based out of Milford, Conn. (www.nutty.com; ph 800-468-8891).
“Unfortunately, I do have a worst buy as well. Although I enjoy its size, capability, excellent cold weather starting, and fuel economy, my Deere 4300 medium frame compact with a 430 loader equipped with the 12 by 12 mechanical reversing transmission has had many issues with the transmission/clutch design. I thought that a gear drive machine would be better for occasional field use such as raking or tedding, but it hasn’t worked out that way. The ratios of the transmission have too much overlap and no matter which of the three ranges you select, there is often no gear available to provide a suitable speed. Although the mechanical reverser may work well in design, we’ve had a dealer do major clutch adjustments twice (which requires splitting the tractor and is extremely difficult to do) which did not last. A third disassembly in our shop revealed a failing reverse shaft bearing which caused excessive end-play in the transmission shaft which affected clutch adjustment. Next time, I’ll try the hydrostatic version of this size machine. I like the extremely strong 430 loader and the fact that most of our loader attachments can be shared with a smaller 4110 tractor and a larger 5425 tractor but there has been too much downtime.”
James has had problems with his 2000 Deere 4110 tractor. “The electronic dash control indicator has gone out twice. The park position gave out, which required work on the transmission, and the brakes locked up. A 1-way valve had to be installed in the fuel line to make the tractor start. All this happened with less than 600 hours on the tractor. The company wouldn’t help pay for the repairs.”
John Deere 4425 combine
2 Best Buys0 Worst BuysBoyd Woolsey, Stendal, Ind.: “My Deere 4425 combine has been a real headache over the years. The first two years it never ran more than 11 hours without being worked on. At 128 hours the engine blew up. We usually have to spend about $1,200 each year on itand we run it only about 100 hours a year. Makes me wonder about some of Deere’s other equipment.”
Dean Taylor, Blissfield, Mich.: A Morton pole barn rates as Dean's “worst buy”. “The crew that built it made a lot of construction mistakes, but the local salesman said he couldn't do anything about it and constantly dragged his feet on fixing anything. After wrote to the company presi dent, however, everything was fixed the way it should have been in the first place.” “After wrote to the company president, everything was fixed the way it should have been in the first place.” Dean's “best buy” is his 1987 Deere 4425 combine. “It runs smooth and isan all around good performer.”
John Deere 4455 2-WD tractor equipped
2 Best Buys0 Worst BuysMichael Schomers, Earling, Iowa: Michael likes his 1993 Deere 4455 2-WD tractor equipped with powershift transmission. “It’s a good all-around tractor. I use it in the field to spray, plant, and pull grain wagons. “Il mounted Rawson Zone Till attachments on my Deere 6-row planter (Rawson Farms, 7413 North Nottawa Road, Farwell, Mich. 48622). They eliminated the need to doany tillage work atall last spring. They’re a best buy.”
Merritt Von Stein, Arlington, Ohio: Merritt's pleased with his 1992 Deere 4455 2-WD tractor equipped with a powershift transmission, “We use it to pull our planter, drill, and cultivator and it handles all of them well. However, wish Deere would provide an option for a larger hydraulic pump so that I could raise and lower my 12row planter faster.”
John Deere 4455 4-WD tractor
2 Best Buys0 Worst Buys“I like my 1997 Deere 4455 4-WD tractor. It works great just like the dealer said it would.”
Loren Pierce, Tomah, Wis.: Loren’s happy with his 1990 Deere 4455 4-WD tractor. “It drives nice and I like the powershift transmission,”
John Deere 4455 MFWD tractor
2 Best Buys0 Worst Buys“I like my 1998 Chevrolet Silverado 1500 extended cab pickup. No problems. I follow the company’s service schedule which helps a lot. It has more than 40,000 miles on it.
“I use my 1998 Deere 6200 tractor for doing loader work. I had to replace the pto switch soon after I bought it, but otherwise it’s been trouble-free.
“My Deere 4455 MFWD tractor has almost 2,000 hours and has worked perfect.”
Jerry Josefy, Grandfield, Okla.: Jerry's had good luck with his 1989 Deere 4455 MFWD tractor. “It always starts, is easy on fuel, and has a comfortable cab with a good air condtioner. It has a lot of power for a small tractor and I really like the powershift transmission - works great for plowing, baling, etc. It has good lights and doesn’t use any oil. No problems. It also has good resale value.” A 1992 Deere 673 hay rake heads his “worst buy” list. “I decided to replace one of my old New Holland rakes with the Deere model. However, it didn’t have as many grease zerks and also didn’t clean hay off the ground as well. In heavy windrows the drive wheels would slide whereas the drive wheels on the New Holland rake continued to turn. I traded it back in.”
John Deere 4520 compact utility tractor
0 Best Buys2 Worst Buys“My 2006 Deere 4520 compact utility tractor is my worst buy. The steering locked up and it took 3 years for the company to fix the problem.”
Kenneth Fricke, Corder, Mo.: “I like my 1971 Deere 4520 tractor with a powershift transmission, I bought it used and it still works great, “My worst buy 1993 Case-IH 4200 15ft. Combo-Mulch finisher won't create an even seedbed, The dises on front bring corn stalks toward the center and pile them there in a ridge which the cultivator in back can’t level out. The dealer has tried to fix the problem with no luck. Company representatives admit all 15-ft. models have this problem but won't do anything about it.”
John Deere 458 round baler equipped
2 Best Buys0 Worst Buys“My Deere 458 round baler equipped with net wrap makes perfect bales every time.
“My New Holland 5070 small square balers eat hay better than any other baler I know of.”
“I’ve been using my 1968 Deere 458 grain dryer for almost 30 years and it’s still dependable. I use it as a continuous automatic dryer with a 10 hp electric motor and a 2 hp unloading motor. My total cost for repairs has been less than $300. I use it to dry about 24,000 bu. each year.”
John Deere 4610 compact tractor
2 Best Buys0 Worst Buys“I use my 2004 Deere 4610 compact tractor to haul firewood and to bush hog. It works great and is easy to operate.
“We use our 1997 Classic CL400 outdoor wood burning furnace all year long. It’ll burn any kind of wood, although it works best with white pine.”
“It has great digging power for a small track hoe,” says C.W. about his Case CX31.
“My Deere 4610 is a great tractor, but the plastic hood and nose on it fell apart after just 600 hrs. The dealer wouldn’t help so I contacted the company but got no help. We keep the tractor inside a shed whenever it’s not being used so it’s been well taken care of.”
John Deere 4700 tractor equipped
2 Best Buys0 Worst Buys“I like my 2001 Deere 4700 tractor equipped with a Deere 460 front-end loader. It’s the handiest tractor I’ve ever had. No problems.
“My Black & Decker 1/2-in. VSR hammer/drill is my worst buy. The gear stripped after very little use.”
He owns an apple and fruit orchard and says his Toro X-mark 25 hp zero turn riding mower is his “best buy”. “It’s very maneuverable and works great for getting around the trees. It’s built rugged and is a real pleasure to use.
“I’ve had poor luck with my Loftness 72-in. flail mower. I can’t get the deck low enough to chop up the fine branches that fall on the ground when our trees are pruned in the spring and fall. I’ve since bought a Rears 82-in. flail mower, which does an excellent job of mowing down low.
“My Deere 4700 hydrostatic drive tractor is also a great machine.”
John Deere 4710 tractor
1 Best Buy1 Worst Buy“My 2006 Deere 4710 48-hp tractor is the perfect size for my needs. I actually bought this tractor in 2008 with 123 hours on it. It had been loaned by Deere to the Kansas City Chiefs as a field tractor, and then sold to a local dealer here in Maine. This tractor works well in confined wooded areas. It’s low to the ground and is equipped with turf tires which provide excellent traction. No problems. I also own another 4710 model that I bought in 2005. Both tractors are powered by excellent Yanmar 4-cyl. diesel engines that run smooth and quiet.”
On the negative side, “My 2007 Deere 4320 tractor was noisy and leaked diesel fuel. Sometimes the turbocharger caused the tractor to accelerate by surprise and if I hit a bump loads of firewood would spill out. I traded it in favor of the 4710.”
Bob’s had problems with a hydraulic outlet on his Deere 4710 compact tractor, which he bought in October of 2003. “I ordered this tractor with a hydraulic outlet on back so that I could use a remote cylinder. However, whenever the remote cylinder is supporting a load, the cylinder leaks off about one inch every 10 minutes. I disconnected the hoses to the cylinder and it didn’t leak off any, so the problem has to be with the tractor.
“I talked to my dealer and to the Deere communication center (as directed in the owners manual), and each told me that a cylinder leaking off one inch in 10 minutes is within tolerance. I don’t think a remote cylinder should leak at all.”
John Deere 4755 tractor
2 Best Buys0 Worst BuysDonald C. Reetz, Webster, S. Dak.: “My 1989 Deere 4755 wactor equipped with MFWD is one of my best buys, as were all the other 13 Deere tractors I've owned since 1969, purchased the 4755 used and have put about 2,200 hours on it without any down time or repairs. T liked its traction, power, handling ease, and comfortable, roomy cab, In fact, [liked the 4755 so much, traded it for a 1991 Deere 4955, also equipped with MFWD, last winter “One of my worst buys a Rem 1026 grain vac. Since T bought it new in 1992, T have had to repair its belts, bearings. chains. and sprockets, and flex tubing. Trouble is. parts are priced sky high. There must be a 100 to 150% markup to the customer by the time they get through the distribution chain.”
Milo Crubel, Bloomington, Wis.: Milo’s had good luck with his 1990 Deere 4755 tractor. “Field conditions last spring were bad, but the tractor performed so well it saved us a lot of time and fuel.”
John Deere 4760 tractor
2 Best Buys0 Worst Buys“We bought a used 1997 Toyota 4Runner with about 87,000 miles, and now it has about 260,000 miles with very few problems.
“Our 1993 Deere 4760 tractor, which we bought used, now has more than 14,000 hrs. on it. It’s reliable, and easy to operate and service. I wish Deere would make affordable and simple tractors like this one again.”
Arlen Bonde, Kathryn, N. Dak.: Arlen nominates his 1989 Ford TW-35 front wheel assist tractor as his “worst buy”. “Judging by the way they designed the radiator screen, they must have thought this tractor would be driven only on the highway. There are big gaps on the corners of the screen that let in pieces of straw. Also, pieces of straw kicked up by the front tires get sucked in under the fuel tank. On windy days I have to clean out the radiator two or three times. “The air filter design inside the cab is a joke. The filters are secured by small plastic holders, but there’s no way to adjust them to get them tight and so much dirt gets sucked into the cab that it won't stay clean, One of the plastic holders broke, allowing a filter to fall out, and I accidentally drove over it with the tractor. “The engine leaked oil and anti-freeze onto the front wheel assist driveline and made a mess. The seat is poor quality and ripped after only one year. The tractor is underpowered and uses too much fuel. The transmission gears are so close to each other in speed that one third of them are useless. The hydraulic levers are poorly positioned and won’ t stay in their proper settings. The hydraulic system leaks a gallon of oil per day. The tractor was supposed to come with a 3-year warranty, but our dealer wouldn't ninate suys fix anything without charging us for it. The adjustable steering wheel is located so far from the seat that I have to lean over toreach it. If I slide the seat ahead so I can reach the steering wheel, my knees hit the dash, “My Deere 4760 tractor is my best buy. It's rated at only 5 hp more than the Ford TW-35, but it can pull everything 1 mph faster and uses much less fuel. I had a few small problems with it, but my dealer fixed them at no cost. Deere tractors cost more to buy, but at resale you lose twice as much with a Ford. “My Deere 9600 combine is a best buy. It's a quiet machine, and daily maintenance is faster than on any other combine I’ve ever used. We combined all year without any down time.”
John Deere 4955 MFWD tractor
2 Best Buys0 Worst BuysA 1995 New Holland swather rates as Wayne’s “best buy”. “It works well and has had few problems. “We’re happy with our Deere 4955 MFWD tractor which we bought used four years ago.”
Dave Nicholas, Martinsville, Ohio: Dave's impressed with Never-Seez antiseize compound (Never-Seez, 2910S. 18th Ave., Broadview, Ill. 60153). “I’ve used it for about 40 years every time a threaded, “If this welder worked any better all I'd have to do is stand back and watch it weld by itself.” splined, keyed, tapered, or pressed fitting is taken apart. It has never failed me. “T like Armstrong Norseman A/S tires. They offer an excellent ride in both C (6ply) and D (8-ply) ratings and grip like a leech on wet pavement. The aggressive, self-cleaning tread provides excellent offroad traction and is quieter than most passenger tread tires. A/S stands for asymmetrical, meaning no two tread blocks are alike. The tires are computer-designed to cancel out noise-producing harmonics. I’m on my 10th set in 12 years. I’ve used them on five different trucks. The tires always get 20 to 50% more mileage than rated. The 9.50 by 16.5 tires have a bigger casing than any other tire of this size which is a definite advantage.” Rick Fiechter, Montpelier, Ind.; “I boughta Wurdinger tile plow in the summer of 1989 (Farm Drainage Plows, 909 4th St. N.W., Waverly, Iowa 50677) to use with our Deere 4955 MFWD tractor. was alitle skeptical whether! would really use itmuch, but for the limited investment we thought it was worth the risk. was able to purchase laserequipment, which I felt was necessary, from a contractor in our area. ended up spending $13,000 for the plow and laser equipment, “We've been ditching our wettest farms for alittle over two years now. We tile only when we’ re caught up with our other work. So far we've done about 475 acres, putting in tile every 50 ft. We've probably put in a total of about 475,000 ft. Wear to the plow has been minimal. It's been one of the best machinery investments we've ever made. But laying all economics aside it has been a rewarding experience to improve our land for ourselves and future generations.”
John Deere 4-WD Gator
2 Best Buys0 Worst Buys“I like my Deere 495 riding mower equipped with a 56-in. mower deck and Yanmar diesel engine. I use it to mow two to three acres every summer.
“My Deere 4-WD Gator is also equipped with a Yanmar diesel engine. It’s a good, heavy machine. I use it to check on cattle and to do chores around my farm. Yanmar diesel engines cost more but make up for it with power and fuel efficiency.”
Loren and Sharon nominate their 2001 Deere 4-WD Gator as their “best buy”. “We use it for everything from fixing fence in rocky country to checking on heifers. We often drive it over very rough terrain, which it handles easily.
“Our only complaint is that Deere can’t make a seat that doesn’t fall apart. We keep both our tractor and the Gator in a shed out of the weather, but the seats on both machines have still deteriorated badly. The tractor is just four years old but the seat already looks like it’s 20 years old. We go through Gator seats in less than a year.”
John Deere 5105 4-WD tractor equipped
2 Best Buys0 Worst BuysJohn’s the satisfied owner of a Deere 5105 4-WD tractor equipped with a 522 front-end loader. “It has excellent traction and handles 2 big round bales with ease.”
“My Deere 5105 4-WD tractor equipped with a front-end loader is an awesome machine. I’ve used it to clear land, plow, do grading work, spread gravel on driveways, and plant wildlife food plots. I also use it to haul logs and firewood. This tractor will go anywhere.
“My 2013 Sears Craftsman zero-turn riding mower equipped with a 54-in. deck doesn’t turn like a zero-turn mower. It keeps going straight even when the lever is moved which leaves drag marks on my lawn. It mows great but isn’t really a zero-turn mower.”
John Deere 5203 tractor
2 Best Buys0 Worst Buys“My 2004 Deere 5203 tractor is handy and easy to get on and off, and very easy on fuel. However, I think it should have a hitch on front under the grill guard.
“My 1994 Chevrolet pickup has about 87,000 miles on it but still has the original tires. It’s a good, solid truck.”
“I’m well pleased with my 2006 Deere 5203 loader tractor. It runs well with no hydraulic leaks and no breakdowns. It has plenty of power to operate my 6-ft. Bush Hog and 6-ft. loader bucket.
“My 2006 Cub Cadet LT 1554 riding mower equipped with a 54-in. deck is a best buy. It has plenty of power and cuts evenly.”
John Deere 5205 tractor equipped
2 Best Buys0 Worst Buys“This is one tough little tractor. No problems,” says Gary about his 2005 Deere 5205 tractor equipped with a 522 front-end loader.
“My 2009 Deere 5093E Limited tractor has had two problems in the first 100 hrs. First, the cab doors don’t fit right. The dealer tried to adjust the doors but they’re still cracked at the bottom. Second, a throttle linkage problem made the engine surge up and down. The dealer installed a new throttle linkage, which helped.”
“My 1997 Ford Escort sedan is my best buy. Over the years I’ve installed a new timing belt and a new spring for a total repair cost of about $80. It now has about 210,000 miles on it and still runs good.
“I bought my 2000 Deere 5205 tractor used with 227 hours on it. It’s equipped with a plastic gas tank which I can’t get to stop leaking. The gearshift levers are poorly located, so when I get off the tractor it’s possible to accidentally knock it in gear without even realizing it.”
John Deere 5205 MFWD tractor equipped
2 Best Buys0 Worst Buys“It’s a dependable, versatile tractor,” says Rick about his Deere 5205 MFWD tractor equipped with a 521 front-end loader. “It does a good job of getting hay bales out through snow.”
“My 2004 Deere 5205 MFWD tractor equipped with a 3-cyl. diesel engine and a 521 front-end loader is my best buy. It has almost 90 hours on it. I use a high volume 84-in. bucket that I’ve loaded full with stones but it still has enough hydraulic power to handle it. This tractor always starts and has excellent fuel efficiency. I can easily go 20 to 30 hours on a thankful of gas under moderate work loads. I live in a hilly region with slopes of 45 degrees and steeper where 4-WD is a must. This tractor’s controls are conveniently located and it has a good top end speed of 17 mph depending on tire size.
“However, this tractor could use a few improvements. The brake lock is difficult to disengage, and the gear shift transmission is difficult to shift while moving in high range without grinding the gears. The loader cylinders retract at different speeds whenever I try to hook up the quick-tach bucket. I contacted the dealer and he said this was normal, but I disagree. I think a seal is leaking on the rod but I haven’t looked into it yet.
“The tractor had a coolant leak at 75 hours, but the cause turned out to be a hose clamp that had been super tightened, deforming the hose a little. The noise from the diesel engine is so loud that I have to use hearing protection. The telescoping drawbar is difficult to move in and out. The bucket tilt cylinders seem slow, but this could also be due to a leaking cylinder seal.”
John Deere 5300 MFWD tractor equipped
2 Best Buys0 Worst Buys“I like my Deere 5300 MFWD tractor equipped with a 540 front-end loader. I bought it used a year ago, and several weeks later the pto clutch gave out. However, the dealer replaced it at no cost. This tractor is small enough to get in and around buildings, yet it’s strong enough to handle round bales and grind feed. And, with front wheel assist, it works great in mud and snow.”
“My 1995 Deere 5300 MFWD tractor equipped with a Deere 540 front-end loader is my best buy. It’s hard to believe what it will do. The shuttle reverser works great. It’s been completely trouble-free.”
John Deere 5303 tractor equipped
2 Best Buys0 Worst BuysBilly likes his Deere 5303 tractor equipped with a front-end loader. “The only problem is the rod nuts came off inside the bucket’s tilt cylinders. Everything else about this tractor has been good.
“I use my 2003 Zuma scooter to pull a trailer, and I can also haul small objects on it between my feet.”
“My 2006 Cub Cadet zero turn riding mower is my worst buy. It does a great job of mowing, but the steering system has never worked right no matter how many adjustments are made to it. The company replaced the first mower I bought, but the replacement model doesn’t work any better. Now it’s not running because of safety switch problems. The last time I used the machine I could only go a few feet before it would die, and then I’d have to start it back up again. This problem happened numerous times before I finally gave up on it. Now the warranty has expired. I’ll never buy another Cub Cadet product.
“I’ve purchased nine new tractors and three used ones in the past 18 years. My favorite is a 2007 Deere 5303 tractor. It has more than 500 hours on it with no problems. It has a lot of power and is easy on fuel.”
John Deere 5400 4-WD tractor
2 Best Buys0 Worst Buys“I thought my Deere 5400 4-WD tractor was a best buy, but now I’m not so sure. This tractor does a good job cutting, baling hay, bush hogging, and doing some light loader work. It also can pull my offset harrow easier than the larger Ford 7700 tractor it replaced. I bought the tractor new, and it now has 850 hours on it. Recently the clutch seems not to disengage completely. When the clutch is depressed, the tractor’s forward motion stops but when changing gears it grinds into the next gear. The longer the clutch stays in neutral the harder it is to get into gear again. I’ve been told the splined shaft that the clutch disk rides on my be dirty or rusty, causing the disk to stick on one side and drag. This tractor is used only by my dad and me and it hasn’t been abused. I don’t think the clutch should be worn out this soon. It’s adjusted with the proper free play, and has adjustment left. I’d like to hear from anyone who has had similar problems with this model tractor, or about a way to lubricate the clutch shaft.”
“I like my 1996 Deere 5400 4-WD tractor equipped with a Deere 540 front-end loader. We use it to feed silage and have more than 700 hours on it. It starts right up in the winter. It does the work of a Deere 2350 4-WD tractor, but is much easier to use around the barn and in the woods with a log winch.”
John Deere 5400 MFWD loader tractor
1 Best Buy1 Worst Buy“It’s the strongest and most versatile little tractor I’ve ever owned,” says Steve about his 1995 Deere 5400 MFWD loader tractor. It has about 4,000 hrs. on it.
“This tractor only has 65 hp., but I can’t believe what it will do. I’ve used it with a Deere 7000 6-row planter to seed several hundred acres of corn and beans. We also use it to load a lot of big square and round bales, and it’s a great tractor for working in the woods. I’ve also used it to clean out drainage ditches and to pull out neighbors’ machines that got stuck. The controls are handy, and it’s easy to get in and out of the cab.”
“The one tool that I can’t live without is my Gerber Multi-plier pocket tool. I can use it to fix just about any small problem. The pliers can be opened and closed with one hand - it’s almost an entire toolbox in one hand.
“The hydraulic reversing transmission I bought for my 1997 Deere 5400 MFWD loader tractor is really not as much a “worst buy” as a case of overanalyzing on my part. We use the tractor primarily for loading sawdust and wood in dark-fired tobacco curing barns. ‘Dusting’ these barns gets pretty rough on your clutch leg so we ordered the optional hydraulic reversing transmission. This decision turned into a $2,500 mistake. The tractor and transmission work fine, but working in close quarters is made more difficult with the hydraulic reverser. We made a snap decision without trying out the new transmission before we ordered it. Next time we buy a 5400 we won’t order the reverser option.”
John Deere 5500 tractor
1 Best Buy1 Worst Buy“Our 1998 Deere 5500 tractor is our worst buy. We bought a Deere model because in the horsepower range we were interested in the company kept its tractors simple, without using a lot of electronics, etc. The tractor itself is designed well enough, but before I bought it I had major reservations about the cab as it didn’t appear to be up to the company’s previous standards.
“Sure enough, most of the problems we’ve had with the tractor have been directly or indirectly related to the cab. For example, to service the battery you have to remove six bolts and take off both an outside cover and the step. To access the air cleaner, you have to remove a side grill support first because the air conditioning condenser hoses block normal access. To adjust the clutch - which is a major undertaking on a tractor even if it
“It has the power and traction to pull the same equipment as our 4020 and is maneuverable as our 2030,” says Larry, well pleased with his 1998 Deere 5500 equipped with MFWD. “I have only two complaints. First, I prefer the older-style Deere hydraulic couplers with breakaway protection that can be attached under pressure. Second, it needs more toolbox space.”
John Deere 5660 combine
1 Best Buy1 Worst BuyRandy’s had problems with his Deere 5660 combine. “The dealer did everything he could to keep this machine going and worked on it at least 16 different times. It lost all or most of its hydraulic oil 3 different times, the bin covers wouldn’t stay completely open, the rotary screen belt fell off or broke, the stone trap isolator got damaged, the AM/FM radio quit working, an armrest switch panel went bad, and the feederhouse adjustment lever broke. Fortunately these problems were covered by the company’s one-year warranty. However, now I’m on my own.”
Steve likes his Deere 5660 combine equipped with a 6-row corn head. “Awesome performance. Hills and sidehills don’t slow it down. This is my first rotary combine, and I’m impressed with the clean grain sample and minimum grain loss. My only complaint is the cab is noisier than it should be.”
John Deere 568 baler
2 Best Buys0 Worst BuysTony’s disappointed with his 2009 New Holland 7090 round baler. “We used this machine to make about 200 bales before the belts on the outer sides of the baler started flipping over, and it was difficult to turn them back over into their normal position. To prevent the problem, we had to slow down our ground speed and move from side to side as fast as we could in order to keep the belts from flipping over.
“Later on we were told the outside belts had stretched more than the inside belts, which caused the slip clutch to slip when baling somewhat moist hay. When that happened we had to dump the bale even though it wasn’t tied. After two years I finally traded for a Deere 568 baler and am well satisfied with it.”
“My son bought a 2010 Deere 568 round baler, and it’s hard to believe how it eats hay. The bales we stored for the winter look like they were baled yesterday. I can’t believe how well this machine works.”
John Deere 6110 tractor
2 Best Buys0 Worst Buys“My 1999 Deere 6110 tractor is my best buy. In the past I had owned only Massey Ferguson tractors, all of which had serious fluid leaks and electrical problems. When I took early retirement from my accounting job to farm full-time, I decided to treat myself to a tractor with a cab. So I bought this one and have been well pleased with it. It has a comfortable cab with superb air conditioning, a synchro transmission that’s easy to operate, an electric/hydraulic power lift, and plenty of power. Also, it’s fuel efficient and uses innovative technology.
“My worst buy by far is my 2004 Cater-pillar D4GXL dozer. I previously owned a 1980 Case 850B which was a good, dependable dozer, but it didn’t have a cab. The dust and bees were killing me so I decided to get a new machine. I had pretty much decided to buy a Deere 650H model, but at the last minute decided to do some comparison shopping. The Cat model was priced about $10,000 less than the Deere, and Cat has a reputation as the world’s largest maker of construction equipment so how could I go wrong? (Continued on next page)
“When the dozer was delivered to my farm it had seven hours on the odometer, even though the machine was brand new. Immediately I put it to work clearing saplings off an overgrown field. However, within one hour of operation I knew this dozer was defective. Instead of moving in a smooth, continuous ‘flowing’ manner, the dozer had a herky-jerky motion so bad that it almost ripped my guts out. I shut the machine down and called the dealer to report the problem.
“The dealer called it a ‘surging’ problem and sent out a service truck to fix it. Their remedy consisted of adjusting the free play in the brake pedal and ‘flashing’ the computer. I assume this means they reprogrammed something. But it did absolutely no good.
“They made two more field service calls, making the same adjustments with the same poor results. When the problem persisted, the dealer took the dozer to their shop and made the same adjustments one more time. Talk about being hard headed.
“On one of the field service calls, the technician tested all the relevant system pressures while the dozer was operating. The track motor pressure fluctuated up and down, from 800 psi to 1,100 psi and back to 800 psi. So he had the problem isolated but couldn’t find the cause. I believe the problem is that the speed control sensors, which should maintain a steady operating speed, are defective, causing the erratic track speeds. It seems almost like there’s a gremlin under the hood messing with the throttle or governor. Based on engine sound and feel, I don’t think engine rpm’s are the problem but there’s no way to tell for sure since Cat didn’t bother to include a tachometer in the equipment gauges on this machine.
“The problem still isn’t fixed. I don’t think the dealer has a clue as to what’s wrong or how to fix it. Maybe I need to test the lemon law?”
“I’m impressed with my Deere 6110 tractor equipped with a deluxe cab. I’ve also owned several Deere combines and two 4440 tractors, and they’ve performed equally as well.”
John Deere 620 tractor
1 Best Buy1 Worst BuyGeorge says both his Deere 620 2-cyl. tractor and his Massey Ferguson 283 have been good tractors. “But my best buy is my Mahindra 475 made by a former IH plant in India,” he says. “Anyone who can work on an IH can repair it very simply. That’s important.”
Carl Rasmussen, Brandon, Vt.: “My worst buy is a 1990 Deere 620 harrow. We bought it on Memorial Day weekend last year and that same afternoon it fell apart. The following Tuesday the front half was returned to the dealer and fixed by replacing bearings and gang bolts. After they put it back together, we harrowed 20 acres of sandy loam and discovered again that every bearing was broken or wouldn’ ttake grease. We were so afraid to use it that we found two old 12-ft. KBAs for parts and fixed the model we already had. We traded the 620 in for a Deere 3950 chopper that fall. “In the summer of 1991 one of our old wagon running gears gave out and we replaced it with a new Deere 720 running gear, We had hauled only four loads of hay with it when the bolt that holds the pull tongue to the wagon snapped. When we exchanged the bolt the dealer told us that we must have turned the wagon too sharp. In our opinion, the bolt was defective and in our 40 years of farming no other wagon tongue broke like that, new or old. Compared to the 1967 Deere running gear we're still using, this new one is not built as well, does not trail as well, and probably won't last for 25 years.” Carl's 1990 Deere 3950 forage chopper rates as a “best buy”. “It doesn’: take a lot of power, is easy to maintain, and does a good job chopping. Itruns so easy that you can go as fast as the tractor will go and it still chops fine.”
John Deere 6300 MFWD tractor equipped
2 Best Buys0 Worst BuysHarold’s happy with his 1996 Deere 6300 MFWD tractor equipped with a 640 frontend loader. “The cab is easy to get in and out of and keeps me warm during snow removal. It’s a good loader tractor.
“My 1997 Deere 717 stalk cutter works good for mowing weeds and road sides.”
Lloyd likes his Deere 6300 MFWD tractor equipped with a Deere 640 SL front-end loader, but says it could use a couple of improvements. “It’s an excellent loader tractor. I really like the Power Quad transmission, and the cab is easy to get in and out of. One problem is that it’s difficult for the driver to see the drawbar hole. Also, hooking up an implement to the pto shaft is really difficult. You almost need a pipe wrench in order to rotate the shaft.”
John Deere 6420 tractor
2 Best Buys0 Worst Buys“My 2001 Massey Ferguson 6255 tractor with cab has only about 950 hours on it but has had a lot of electronic malfunctions. The dealer seems unable to repair them. The company knows its Autotronic computer system has design problems but has done nothing about it. My Deere 6420 tractor is far more reliable. No more Massey Fergusons for me.”
“I bought my 2006 Deere 6420 tractor used with about 900 hours on it. It’s a wonderful tractor to operate - no problems at all.
“My 2001 Chevrolet Duramax pickup equipped with an Allison transmission has 89,000 trouble-free miles on it. It has plenty of power to pull a 24-ft. livestock trailer and gets 18 to 20 mpg empty on the highway.”
John Deere 65 riding mower
2 Best Buys0 Worst BuysOtto Kaschube, Brockton, Mont.: "The engine on my Deere 65 riding mower doesn’t have enough power.” On the positive side, “My Melroe 506 toolbar pulls straight and does a good job. 1 like its flexibility.”
Neil Wirkler, Luana, Iowa: Otto Kaschube, Brockton, Mont.: "The engine on my Deere 65 riding mower doesn’t have enough power.” On the positive side, “My Melroe 506 toolbar pulls straight and does a good job. 1 like its flexibility.”
John Deere 650 loader tractor equipped
2 Best Buys0 Worst Buys“I bought a used Deere 650 loader tractor equipped with a diesel engine to plow snow and for other small farm chores. But right after I bought it I found the transmission was about half full of water. I also noticed the loader and steering were ‘lazy’. The transmission fluid in this tractor is used for the hydraulics.
“My Deere dealer found that water in the transmission had ruined the hydraulic pump, as the screen that keeps dirt out of the pump was plugged and corroded. The filter probably hadn’t been changed since the tractor was new. A new pump, screen and relief valve had to be installed.
“Now the tractor runs fine and just sips fuel. I’m not real happy with the loader’s lifting capacity, but I’m told that a Deere 650 is too big to be a small tractor and too small to be a big tractor so I shouldn’t expect too much. Oh well, it’s pretty and it’s green.”
“I use my 1986 Deere 650 compact tractor to work my food plot, using implements that I built myself. This tractor doesn’t use any oil, is stingy on fuel, and has plenty of power. I also own four Deere lawn and garden tractors and have had great success with all of them.”
John Deere 6600 combine equipped
2 Best Buys0 Worst BuysGary owns three Deere 4020 diesel tractors and says they’re all “best buys”. His 1966 and 1969 models are equipped with syncromesh transmissions, while his 1970 model has a powershift transmission. “They’re the most complete tractors in every way. I use them to do light-to-heavy work and refer to them as icons. The three tractors have about 16,000 hours between them, with no problems that I couldn’t fix by myself. There’s not a tractor out there that will resell like these models. When new they sold for $7,000 to $8,000, but I can get $15,000 to $20,000 for them today.
“My 1968 Deere 6600 combine equipped with a diesel engine is still the sharpest combine in our area. It’s equipped with a 329 cu. in. diesel engine that’s easy on fuel. I painted the combine to like-new condition in 2007 and applied chip guard over some painted spots to keep the paint from wearing off. The combine is equipped with a 213 flex head and a 4-row corn head that’s set for 38-in. rows. They don’t build combines like this any more, and I like being able to do any repair work that needs to be done. No computers on this machine.”
Rod’s pleased with Roundup Ready soybeans. “Weed control was very good. After spraying Roundup I had almost perfect grass and broadleaf control except for late nightshade. The Roundup Ready beans yielded about the same as our non-Roundup beans. However, I don’t like the $5 per bag surcharge. How long will the surcharge last? Forever? “My 1973 Deere 6600 combine had trouble with the drive belts on the auger that delivers grain into the hopper. I solved the problem by using a hydraulic motor to operate the auger. I control auger speed from the cab. I use the same hydraulic system to operate the reel on both the straight head and bean head. The oil goes first to an orbit motor on the hopper. The return line goes to the orbit motor on the straight head, then back to the oil reservoir. It works perfect this way. I didn’t have enough hydraulic capacity to put a ‘T’ in the hydraulic hose line and send it to both motors at the same time.”
John Deere 6615 tractor
2 Best Buys0 Worst Buys“The pto shaft on my Case IH MX 135 tractor keeps coming out. I use this tractor to operate a round baler, and about every 10 bales or so the snap ring securing the pto shaft pops out and the pto quits running. I replaced about everything that can be replaced, including the telescoping shaft on the baler, but nothing helped. I finally traded this tractor for a Deere 6615. Problem solved.”
“My 1999 Deere 8200 tractor has a lot of power. Also, it drives and handles nice.
“My 2004 Deere 6615 tractor has a much-improved transmission over the company’s 6605 model.
“My 2003 GM 2500 pickup equipped with a 6.0-liter engine is an excellent work truck with a lot of towing capacity. My 2004 GM 3500 pickup has a lot of power and towing capacity, and it accelerates well. It has a fairly nice ride.
“My 1999 Polaris Sportsman 500 has been trouble-free.”
John Deere 670 utility tractor
2 Best Buys0 Worst Buys“My 1992 Deere 670 utility tractor is easy on fuel and starts well in cold weather. We bought a 3-pt. tiller to use with it and had a minor problem with a 3-pt. hitch pin which the dealer promptly replaced. Otherwise, no problems. I’m well pleased with it.”
A 1994 Deere 670 tractor equipped with loader and backhoe attachments rates as Bob’s “best buy”. “This small tractor does everything I ask of it and is just the ticket for our 46-acre ranch. Although it has a small 3-cyl. 18 hp engine it pulls strong in 4-WD.”
John Deere 6810 self-propelled forage harvester
1 Best Buy1 Worst BuyThree years ago Gaylen bought a used 1995 Deere 6810 self-propelled forage harvester. He says it’s his “worst buy” ever. “The first season it had some electronic problems caused by internal heat. The dealer said he would send someone out to look at it - at $45 per hour.
“The second year with this machine could best be described as a living hell. It was constantly having electronic troubles. The only thing that worked consistently was the radio, which would tell me every hour about Deere’s wonderful parts and service program. That fall during corn silage harvest I had to replace the blower band, which is the highest wear item on the machine. It took three men eight hours to do the job. Then, a week later, the blower assembly exploded and it took four men two days to replace it.
“All fall the machine ran trouble-free for a total of only five days. By the end of the silage harvest season I was calling the machine my ‘Patsy Cline,’ because whenever I walked by it she fell to pieces. Deere’s solution to the problem was to say ‘buy a newer one, they’re better.’ In the two years that I owned the machine it lost $60,000 of its value, and I had to spend more than $40,000 just to try to keep it running. If that’s the best they can do I’ll never buy another piece of Deere equipment. My dealer tried to help me but I got no product support from the company.”
Mitchell’s impressed with his 1996 Richardton 770 2-wheel, 1,050 cu. ft. dump cart. “I really like how it turns at the end of the field. It’s much more maneuverable and built twice as sturdy as the 4-wheel Byron wagon that I had been using. It also dumps faster and floats better in wet conditions.” On the “worst buy” side, he lists his 1996 Deere 6810 self-propelled chopper. “The chopper itself works good, but with all the electrical systems something is always going wrong. I put about 700 hours on it the first year and at the end of the season there wasn’t much left on the electrical systems that still worked. I also had problems with the rotary screen, knife sharpening system, spout rinse, Power Saver relays, warning flashers, and electric system for the hydraulic breakaway couplers. The system for keeping the rotary screen clean works terrible. It’s designed to use suction from the exhaust pipe, but the suction is too weak to pull wet hay or silage through a 6-ft. pipe, which causes the pipe to plug up several times each day. We have to use a piece of wire in order to poke the material out. I think the company could have built a better machine.”
John Deere 693 6-row corn head
2 Best Buys0 Worst BuysRichard’s impressed with his Deere 693 6-row corn head. “It’s equipped with plastic snouts which seem to slide through the corn easier and do a better job of picking up down corn than conventional steel snouts. Our neighbor’s cows got out and camped in our corn field one night, which resulted in a lot of down corn. However, these snouts were able to pick up most of it.”
Jim’s the satisfied owner of a 1996 Deere 693 6-row corn head. “It’s an excellent piece of equipment that’s easy to service. The knife stalk rolls work well. It’s equipped with remote hydraulic adjustable deck plates which is an excellent option. The only problem with the head is the indicator which shows the relative position of the adjustable deck plates. It’s located too close to the feederhouse and under very dry conditions quickly becomes covered with leaves. It should be moved farther out toward the end of the head so that the operator can see it at all times.”
John Deere 7000 8-row planter
2 Best Buys0 Worst BuysMarkus D. Taylor, Belmont, Ontario: Markus is pleased with 1991 Till-Tech 2in. fluted zone-till coulters (Till-Tech Systems Ltd., Rt. 5, St. Thomas, Ontario Canada NSP 3S9). He mounted 3 coulters per row on his Deere 7000 8-row 30-in. planter, “They're built better than anything else on the market and should stand up to many years of rugged use. They make a nice zone to plant into.”
Dennis Wedemeyer, Ravenna, Neb.: “It’s simple to set and operate,” says Dennis, whose Deere 7000 8-row Max-Emerge planter has nevertheless had some problems. “It should be designed so there’s equal weight on cach gauge wheel, and so that notill coulters can be used without having to remove the disc furrowers. The seed and insecticide boxes should be funnel-shaped so I don’t have to clean so much out of the boxes.”
John Deere 7100 no-till planter
2 Best Buys0 Worst Buys“MyDeere 7100 no-till planter that I bought 7 or 8 years ago has been a good buy. I’ve planted in everything from fescue to wheat to shoulder-high vetch with good results. It’s equipped with 3 bu. hoppers and cast iron closing wheels. Does a fine job.”
Ken Lamping, Glenville, Minn.: Ken’s happy with his Wilrich 27 1/2-ft. air seeder. “T use it to plant soybeans on 7-in. spacings directly into untilled corn stalks. It allows one-pass planting like a no-till planter, but the tillage helps warm up the soil. I sometimes make a pass with my stalk chopper before I plant. Seed emergence is consistent and more uniform than when planted conventional or practiced minimum tillage. “I use my Deere 7100 planter equipped with Yetter residue coulters to plant corn directly into soybean stubble. It generally works well. However, I had some problems with soil compaction caused by wheel tracks from chemical and fertilizer applicators.”
John Deere 7200 MaxEmerge planter
1 Best Buy1 Worst BuyMarvin Langley, Fountain, N.C.: Marvin mounted “best buy” 1993 Martin row cleaners on his Deere 7200 MaxEmerge planter. “We use them to plant soybeans into wheat stubble and corn into soybean stubble. They work better than any other row cleaner on the market. However, I would recommend one improvement. The row cleaners bolt on in place of the coulters, wish I could use both coulters and row cleaners.”
Arthur Dietrich, Graceville, Fla.: “Our Deere 7200 Max Emerge air planter places’ seed evenly and accurately. On the “worst buy” side, Arthur isn’t happy with his Priefert model 85 automatic/manual headgate. “We couldn’ tcatch many animals with itand it was hard to hold them when we did. We retumed it.”
John Deere 722 mulch finisher equipped
1 Best Buy1 Worst BuyKenneth E. Strebel, Jerseyville, Ill.: “My best buy is Columbia #2000 aluminum fiber roof coating made by Central Petroleum Co., Cleveland, Ohio. I applied one coating toarusty roof without using any primer. It stopped the rust and looks great. I'll also seal seams, nail heads, and bolt heads so they won't leak. I recommend using it on machine sheds and grain bins. It’s supposed to last about 15 years. I was so impressed I became a dealer for the company.” Steven R. Kirkpatrick, Mechanicsville, Iowa: “It does an outstanding job handling trash and is easy toset,” says Steven, pleased with his 1990 DMI Tiger Mate field cultivator equipped with a coil tine harrow. “IL has done everything the company said it would. I’ve even used it in standing corn stalks with no plugging. It’s built heavy and is an outstanding machine.” On the “worst buy” side, “My Deere 722 mulch finisher equipped with a coil tine harrow is poorly engineered and wouldn't do anything but make ridges. My dealer bent over backwards to solve the problem but had no luck, The company was no help and won’tadmit they have a problem. I had to use a 15-in. crescent wrench to make adjustments, and whenever I changed fields I had to make adjustments again. It’s a big joke. We wish we'd never have seen it. We replaced it with a DMI Tigermate.”
Robert Feikena, Luverne, Minn.: ‘‘] don't see why they can't come up with something better or cheaper. I've been using this herbicide for years but I've never really been happy with it. Conditions have to be perfect or it doesn't work,” says Robert, unhappy with Basagran from BASF. On the “best buy” side, he lists his John Deere 722 mulch finisher. ‘Does a good job of incorporating all chemicals in one pass. We used it to put down Dual and Treflan, It did a perfect job and left the field in good shape for planting. Well pleased with this machine, “I'm also pleased with my ToxO-Wick power washer. really like the hot water and the high pressure. “Our Chevrolet Silverado 4-WD pickup with 305 engine is also a best buy. I couldn't ask for more in a pickup. A real classy machine that has power and gets good gas mileage. “Another good purchase is our new Butler feeder wagon. Does a good job of mixing all kinds of feedstuffs. The scale works perfectly so far,” count balance. I have also used Lotus to balance rations, record feed useage, land buying and renting feasibility, create dependable cashflows, and for word processing. I've done all this in less than a year with little previous computer experience and with no outside help. The users’ manual is very good.”
John Deere 7240 notill planter
2 Best Buys0 Worst BuysKen Anderson, Trenton, Mo.: “I’m happy with my 1992 Deere 7240 15-in, notill planter. The vacuum row units do a precise metering job and depth control is excellent. Adjustments are simple to make. The optional cast-iron closing wheels close the seed trench in difficult conditions, yet also work fine in conventional tillage. I traded in a 1988 Deere 750 no-till drill for the planter. Due to its weight, the 750 did an even better job of soil penetration than the 7240, but for accurate seed placement and depth control there’s no comparison between the two machines. Later models of the 750 no-till drill have been improved. The transport axle pivots and closing wheel alignment on the 7240 could be redesigned, but overall it’s a well designed machine.”
Harold Hutchinson, Lima, Ohio: Harold's “best buy” 1991 Deere 7240 notill planter is equipped with 15-in. row splitter units. “After I got all the bugs out of it! used it to plant 600 acres, including over 300 acres of no-till. It produced excellent stands in bean stubble, wheat stubble, and corn stalks.”
John Deere 725 mower
2 Best Buys0 Worst BuysRonald Rakes, Waverly, Ill.: “My Deere 725 mower is my best buy. It’s easy to operate and service, has plenty of power, and great maneuverability. I use it to mow five acres and to trim around 400 trees. My wife loves to drive it.”
Harold Brown, Camargo, Ill: “My Deere 725 mower is the best front-mounted mower I've ever used. The steering wheel and deck adjustment make it easy to use. I can mow my lawn at whatever height I want. “JT unloaded the contraption rather than let it take up room in the shed.” “My worst buy ismy M-C stalk shredder. The drive shaft snapped in the rotor and had to be hauled to the company to be rebuilt. I gota big bill for the overhaul. I unloaded the contraption rather than let it take up room in the shed.” Thomas R. Bentley, Farmersville, Texas: Thomas is generally satisfied with his 1991 Ford F-250 diesel pickup, but says it could use a few improvements. “The fuel filter is difficult to service. The body construction, door material, and workmanship could be better. The brakes catch small rocks, making a lot of noise.”
John Deere 7330 tractor
1 Best Buy1 Worst Buy“I’m well pleased with my Deere 1025R sub compact utility tractor equipped with a mower and front-end loader. It’s a handy, versatile tractor. I especially like the drive-over auto attach mower deck, and the loader sure saves on our wheelbarrow.
“My 2010 Deere 7330 tractor has a lot of power in a compact size and is a joy to operate.”
“It’s built solid and made to last,” says Travis about his 1986 Marty-J riding mower equipped with a 20 hp engine and 60-in. deck (ph 800 624-6774; www.marty-j.com). “I bought this rig used in 1996 and have used it to mow around home and to do custom work. The deck is easy to service and clean, and I can sharpen the blades without having to remove them. I recently sold the mower for almost as much as I paid for it. Now I own a new Marty-J and it works great, too.
“Our 2011 Deere 7330 loader tractor works okay, but for what it cost I’m somewhat disappointed. If I don’t remember to relieve all the oil pressure before removing the loader, it’ll lead to O-ring failure in a valve and then I have to replace the entire valve. The housings around both air filters in the cab broke and now I’m using duct tape to hold them in place. One of the loader mounting brackets is in the way, making it difficult to change the oil. We’ve also had trouble with the cab’s rear window latch, and sometimes the left door latch sticks. Deere’s older tractor models were built much better.”
John Deere 7400 MFWD tractor
2 Best Buys0 Worst BuysDennis likes his Deere 7400 MFWD tractor but says it has nevertheless had some problems. “It’s an excellent tractor with great traction and power for its size. However, it has a really poor 3-pt. hitch. We have to push the hitch down with a front-end loader just so we can hook it up. The company said in time it will get better, but that hasn’t happened.”
He’s disappointed with his AgriTronics Gatekeeper. It uses a heat sensitive eye to detect cattle trying to pass through a gate opening. When it detects one, it’s supposed to activate a loud siren that scares them away. “The problem is the eye doesn’t see,” says Drake. “Also, my cattle got used to the noise of the siren and would walk right through the gate. I also tried it on horses but after three weeks it didn’t work on them, either. I called the company but they wouldn’t help.”
“It’s a pleasure to drive - I like it more every day I use it,” says Kevin about his 1996 Deere 7400 MFWD tractor equipped with a power quad transmission. “It has unbelievable power and fuel economy for a 100 hp tractor. It’s easy to see why other companies always compare their tractors to Deere’s.”
John Deere 755 855
2 Best Buys0 Worst Buys“Our 2016 Deere 4066R compact tractor is easy to drive, has a short turning radius, good hydraulics, and a comfortable ride.
“Our Deere 755, 855, and 955 are great little tractors. We’ve put thousands of hours on them with only a few minor problems.”
“I recently traded my Deere 755 tractor in for a new 1996 Deere 955 model. The 755 was wonderful in every way but I wanted a tractor with more power. The 955 is a compact utility model that works just as good as the 755 but has twice as much power. It’s a dream to operate. It handles a loader and backhoe perfectly.”
John Deere 757 zero-turn riding mower
1 Best Buy1 Worst BuyTerry’s impressed with his Deere 757 zero-turn riding mower. “This machine has plenty of power, works fast and just keeps on running. It did have a valve problem early on, but the dealer promptly took care of it.
“The Masterbuilt Smoker I bought at Bass Pro Shop worked okay for a year, but then the electronic time and temperature control went out at a cost of $300. Neither Bass Pro nor the company would help. My wife then bought another model, but it lasted only 2 years before a door gasket fell apart. I contacted the company but they said they don’t keep parts and wouldn’t help. I think this company builds smokers to sell, not to service.”
“It’s the most poorly designed piece of equipment I’ve ever owned,” says Charles about his 2007 Deere 757 zero turn riding mower. “I ordered it with a hard bagger on back for picking up leaves. The bagger fits so poorly that I get covered with dust while operating it. One day the chute and bagger both fell off.”
John Deere 770 utility tractor
2 Best Buys0 Worst Buys“My best buy Deere 770 utility tractor has more than 1,000 hours of trouble-free service. I use it for pushing snow and also to pull a 5-ft. Bush Hog mower, which it handles with ease. It uses about one gallon of fuel per hour at full throttle.
“My Simplicity ZT-16 ZTR riding mower is my worst buy. It has an excellent Kohler engine but is hard on drive belts, going through up to six belts in a single season. And, it takes me up to two hours to replace a belt. The dealer can’t seem to solve the problem so this mower spends a great deal of time either in my barn or at the dealers.”
William Thomas, Pittsboro, N.C.: “It has a lot of lugging power for a 24 hp tractor,” reports William, owner of a 1991 Deere 770 compact utility tractor. “Starts quickly in hot or cold weather and is fucl efficient. My only expenses have been for routine maintenance. It’s the handiest tractor on our farm.”
John Deere 7700 rice combine
2 Best Buys0 Worst Buys“It’ll cut a lot of rice when we can keep it running,” says Tony about his Deere 7700 rice combine which he bought used. “We’ve been using Deere combines for more than 40 years and this 7700 is the most difficult to repair that we’ve ever owned. Parts for it are difficult to get, also. We have two Deere dealers about 20 miles away, but they don’t stock parts for this combine so we have to go to dealers 60 to 160 miles away.”
“I’m well-pleased with the design and performance of this tractor,” says Lew about his 1994 Deere 7700. “The engine has a lot of power and is responsive and fuel efficient, especially with light loads. The company finally made a hitch that has some lifting capacity and raises higher than the hitches on the older models. The company’s 10 series tractors offer a number of improvements over this model. For example, they moved the headlights higher on the grill and added more air vents in the cab. The only improvement needed now is to make the hood tilt up for easier access to the engine and other components.”
John Deere 7810 4-WD tractor
2 Best Buys0 Worst BuysPaul’s happy with his 1997 Deere 7810 4-WD tractor which he says has more than 2,900 trouble-free hours on it. “It has plenty of power to pull our 22-ft. disk even through wet areas that we encounter every spring. It has a comfortable cab that has a great view and keeps cool on hot summer days.”
Paul’s happy with his 1997 Deere 7810 4-WD. “It has more than 2,900 hours of trouble-free use. It has plenty of power to pull a 22-ft. disk even through wet places that we encounter every spring. It has a comfortable cab with great vision and keeps cool on hot summer days.”
John Deere 8100 tractor
2 Best Buys0 Worst BuysLloyd says his 1996 Deere 8100 with MFWD has a long way to go before it’ll compare to the 1994 Deere 7800 with powershift transmission he traded for it.
“The transmission on the 8100 hesitates between gears. It shifts jerky. The 7800 had more power. The dealer has worked on it but it still doesn’t perform as well as the 7800. It seems doggy on top end pulling.”
Ted likes his 1994 Dodge 2500 pickup equipped with a V-10 engine. “I’ve never owned a Chrysler product before but this pickup is a pleasure to drive. The V-10 engine has a lot of power for pulling fifth wheel trailers and uses no more fuel than other pickups I’ve owned. “My 1996 Deere 8100 tractor has only about 400 hours on it, but already I’m impressed with the operator comfort and new electronic controls. The cab offers a better view than any other cab I’ve been in, and the engine has a reserve torque that seems to be almost limitless.”
John Deere 8120 tractor
2 Best Buys0 Worst Buys“Our Deere 8120 has been a very good tractor.
“We also like our Fendt 724 and 933 tractors. They drive and ride like a car.
“We have several Kubota machines that have served us well, and we’re happy with them. We have three tractors, all in the 100 hp range (M6-111, M105 and M7040 with loader). We also have a zero-turn mower (ZD1211). Our RTV500 side-by-side is very good, and our RTV520-H is excellent.
“All of our Kubota purchases haven’t been great. Our Sidekick RTV XG850 has a lot of issues. One problem is that the front drive train has never been right. The dealer says that it’s okay, but it wears the tires out.”
“I’m well pleased with my 2004 Deere 8120 tractor. It has a quiet cab and a comfortable seat. It’s equipped with new-style lights which were helpful during last fall’s harvest.”
John Deere 825i S4 Gator utility vehicle
2 Best Buys0 Worst Buys“My 2013 Deere 825i S4 Gator utility vehicle has a lot of power, and the ride and handling are outstanding. It’s a double seater model but it still turns reasonably short.”
“My 2013 Deere 825i S4 Gator utility vehicle has a lot of power and the ride and handling are outstanding. Considering it’s a double seater model, it turns reasonably short.”
John Deere 830 diesel tractor
2 Best Buys0 Worst Buys“My best buy is my 1974 Deere 830 diesel tractor. I paid slightly less than $4,000 for it. This tractor will run day and night on a tank of fuel. I replaced a clutch eight years ago but that has been the only major repair. Not bad for a machine that’s 37 years old.”
“My 1972 Deere 830 tractor equipped with a 3-cyl. diesel engine is my best buy. I’ve used it in my landscaping business for 25 years. It has more than 8,000 hours on it but still doesn’t use any oil. It always starts and is easy to handle.”
John Deere 8400 tractor
2 Best Buys0 Worst Buys“I would like to nominate FARM SHOW as our best buy. The ideas we have gathered over the years have saved us thousands of dollars and we’ve purchased products that we’ve never seen anywhere else. We really look forward to every issue.
“Our other best buy is our Deere 4020 diesel tractor which now has 34,197 hrs. on it. This tractor, which was previously featured in FARM SHOW, and still works every day. It runs like new and still has the original Roosa Master injection pump.
“Our Deere 8400 is also a great tractor with good visibility, plenty of power, and is a pleasure to operate. In more than 12,500 hrs. of operation, we have spent less than $8,000 on repairs.
“Finally, our Deere 332 skid steer is amazing. With 14,632 hrs. of operation, it has had no repairs to the engine. We test a used oil sample every year and it always shows absolutely no engine wear.”
“My 1997 Deere 8400 tractor has plenty of power, handles well, and rides nice.”
John Deere 8960 4-WD tractor equipped
2 Best Buys0 Worst BuysLorne’s impressed with his 1990 Deere 8960 4-WD tractor equipped with a Cummins diesel engine. It replaced a Deere 8850 4-WD model which was equipped with a V-8 engine. “I like the combination of Deere reliability and Cummins diesel power. I don’t have to worry about huge repair bills as might be expected with the V-8 engine.
“My worst buy is my 2000 Ford Taurus. After a factory recall to change the computer settings, the fuel efficiency went way down, from 35 mpg to 25 mpg. The company said they couldn’t do anything about it. Also, dust collected between the door seals and blew into the car every time the doors were opened.”
Steven says his two 1989 Deere 8960 4-WD tractors are both “best buys”. “We’ve put 6,000 hours on one model and 5,000 on the other one with only a few minor problems, until we had to put a new hydraulic pump on one model at 5,500 hours. I’ve used the tractors to do everything from scraping to chisel plowing to pulling a stoneboat. One complaint I have about all Deere equipment is the operator’s seat. It’s very uncomfortable and I think the company can do better.”
John Deere 935 riding mower equipped
2 Best Buys0 Worst Buys“My 1974 Cockshutt 1370 4-WD tractor equipped with a front-end loader is my best buy.
“My Deere 935 riding mower equipped with a 76-in. deck is a best buy.
“I’m happy with Stihl chainsaws and trimmers.”
In 1983, Gary bought a 1980 Deere 4440 tractor used with 1,200 hours on it. “This tractor now has almost 8,000 hours on it but has required only minimal repairs, and the engine still doesn’t use a drop of oil. Even though I do a lot of loader work with this tractor it still has the original clutch. Looks and performs like new.
“My 1993 New Holland 415 discbine is my worst buy. It worked well for two years, covering a total of about 700 acres. Then the same splines in the transmission gearbox sheared off. We got it fixed and two hundred acres later the same problem happened again. The machine was still under warranty so the company paid for it again. One hundred acres later the same shaft failed a third time. Every time this problem happened we lost about a week of downtime. We finally traded the machine in for a Deere 935 discbine, which has worked a total of about 3,000 acres and still works perfectly.”
John Deere 950 4-WD loader tractor
2 Best Buys0 Worst Buys“My 1982 Deere 950 4-WD loader tractor has required only routine maintenance. I’ve used it to move manure, dirt and snow, to bush hog, plant corn, and to do other chores. It has about 3,000 hours on it. The one problem has been with the Firestone Z16 tires on front. They came with only 2-ply sidewalls, and the first year both tires got bruised when they hit tree stumps. I replaced them with 5.60-16 truck tires with 6-ply sidewalls. Those tires have worked well but will need to be replaced soon.”
“I like my 1986 Deere 950 4-WD tractor equipped with a front-end loader. Our neighbors all had big tractors and at first they laughed at my little 31 hp tractor. However, over the last 20 years I’ve used it several times to pull their tractors out of swamps and I’ve dragged a lot of stuck trucks and trailers out to the road. I have had clutch problems with it and am now on my third clutch.”
John Deere 955 tractor
1 Best Buy1 Worst Buy“My Deere 1050 and 870 tractors are just so user-friendly. Easy on and off. Just a pleasure to work with.”
David hasn’t had such a positive experience with his Deere 955 tractor and LA115 lawnmower. “The 955s rear PTO seal leaks, and it’s not a bolt-on part. The whole bead end has to come off—not fun. Both the 955 and LA115’s paint comes off in pieces the size of a slice of bread. Deere got cheap and didn’t use any primer. Paint flakes off to bare steel, meaning rust.”
“It cuts very well and I’m finished before I know it,” says John, well pleased with his Deere 955 lawn tractor equipped with 6-ft. mid-mount mower deck, loader and garden tiller. “The foot-controlled hydrostatic transmission is easy to operate.”
John Deere 9560 combine
1 Best Buy1 Worst Buy“My 2005 Deere 9560 combine is easy on fuel and has a nice cab. It’s also fun to drive. I wish the company still made this combine.
“I love my 1972 Deere 3020 diesel tractor.”
“Our 2006 Deere 9560 combine is our worst buy. We used it for only about 80 hours when a line came off the fuel injector and caught fire. It burned the wiring off the engine. We ordered a new fuel line and it came the next day but it was the wrong one. They sent another one out and it was wrong, too. We finally located one in Vincenne, Ind. So we drove 190 miles one way to pick it up. Our insurance paid to get the combine going.
“Then one day I was cutting beans and backed up and saw smoke in the stubble. I got out the fire extinguisher to put the fire out. We let the combine sit and called the dealer. They came out but couldn’t find anything wrong. After we got done harvesting my son was cleaning the combine when he took the shield off and noticed two burned places on the side of the feederhouse. The bearings were out on the dust fan. Now the combine is sitting in the shed and hasn’t been repaired.”
John Deere 9760 combine
1 Best Buy1 Worst Buy“We like the way our 2008 Deere 9760 combine performs. It’s simple to operate. However, it has a Mexican-built engine with hydro-locking problems. The head gasket leaks due to poor machining of the block, which allows the piston cavities to fill with anti-freeze. Deere changed the specs on this engine so they say it’s not their fault and won’t help. The same combine with a Waterloo engine has a .5 percent failure rate, compared to a 40 percent failure rate for the Mexican-built engine.
“While our combine was in the shop, we saw 3 other combines with the same Mexican-built engine. The engines had been torn down and all of them had the same hydro-lock failure. The company’s block person was no help at all. I told him I would be happy if I could buy the parts at cost to make my own repairs and his reply was, ‘Why would Deere want to do that?’ I also asked if the shop was going to let Deere know about the hydro-lock problems and he gave the same reply.
“This was not the service I expected from Deere, and I was very disappointed. We’ve been loyal Deere customers for more than 80 years, but from now on we’ll look at all brands. Deere is becoming just like the car and truck companies. They’re more worried about their stock holders than their customers.”
Kenn’s the satisfied owner of a 2004 Deere 9760 combine which he bought used last summer. “We previously owned two smaller Deere combine models - a 7720 Titan II and a 9600. This new machine has more than replaced those two. It has amazing capacity and the ability to eat those green-strawed beans that have become so common. We were able to operate in wheat at 5 mph and in beans at 5 to 6 mph with a 635 Hydraflex. Even with an 8-row header in 180 bu. plus corn, I wasn’t able to overload the machine at speeds of more than 6 mph.”
On the negative side, he lists his 2004 Hardi Navigator sprayer. “The foam system on it never worked properly. Hardi has done almost nothing to fix the problem which should have been fixed under warranty. Also, only Hardi parts will work on Hardi sprayers. Even their hosing is odd-sized so you have to buy all replacement parts from the company. They also have no factory service reps to deal with problems that come up in the field. Instead, they rely totally on their dealers. I won’t purchase another product from this company.”
John Deere 990 4-WD tractor equipped
1 Best Buy1 Worst Buy“My Deere 990 4-WD tractor, equipped with a fuel-sipping Yanmar diesel engine, works great. This tractor is light enough not to sink in the woods, yet has enough power to handle anything. I bought it with a front-end loader, brush mower, blade, and Woods landscaping rack.
“I like my 1994 Chevrolet Silverado 1500 extended cab 4-WD pickup equipped with a 350 cu. in. engine. I put about 270,000 miles on this pickup before I bought a new Chevy model in 2011. It’s the same color and equipped the same, and now has about 30,000 miles on it with no problems.”
“Our 2005 Deere 990 4-WD utility tractor is our worst buy. As soon as we start it up the engine puts out a lot of foul smelling smoke. Exhaust exits against the front axle and bounces back into the radiator and operator’s station. I can’t put this tractor in gear without braking unless I pause for at least 10 seconds, which makes it unhandy for loader work. Both fenders are rusting at the seams. All these problems were brought to the attention of our dealer, but all we got was lip service. We solved the exhaust problem by installing a vertical exhaust pipe. It cost $38 for materials and an hour of labor.”
John Deere AMT 600 5-wheeler equipped
2 Best Buys0 Worst BuysGord’s happy with his 1990 Deere AMT 600 5-wheeler. “It has worked harder than most wheeled machines twice its age. We’ve used it every year to pick up rocks on at least 200 acres. We also use it every year to haul 30 cords of sugar shack wood and 15 cords of wood for our house. And we put a lot of miles on it hunting raccoons and deer. It also gets wear and tear from our five kids driving it around our farm. It still has the original engine and has gone through three spindle bearings, one drive belt, and two sets of tires. It’s a well built, tough machine.”
Gerald Klimek, Glenwood, Minn.: Gerald likes his 1992 Lincoln SP-250 wirefeed welder. “I’ve used it on 16 ga. 3/8-in. metal with .025 to .035 solid wire and .045 core wire. It's been trouble-free. use argon C25 mix gas. The built-in computer makes it easy to set. It has memory pulse and other features, “My 1988 Deere AMT 600 5-wheeler equipped with a hydraulic lift box is a best buy. I use it to do a lot of different jobs including picking up rocks on our 200 acres of soybeans after we plant. It’s been troublefree.”
John Deere B tractor
2 Best Buys0 Worst Buys“I purchased a 1952 John Deere B from my neighbor about a year ago. It’s been repainted and is in good shape. I’m enjoying it.”
“I’ve been using my 1948 Deere B tractor for 54 years, and it’s the only tractor on my 40-acre hobby farm. I started using it in 1959 on my grandfather’s farm. Over the years we’ve owned many other tractors and even operated a Massey Ferguson dealership, but it’s the old Deere B that we kept.
“We bought a 3-pt. hitch for it, which is an excellent value, and a Pertronix kit to convert the point-style breaker distributor to electronic ignition (ph 909 599-5955; www.pertronix.com). Be sure to buy the recommended coil because your existing coil may not work with this kit. I’ve used this kit on everything from my Deere B tractor to cars from the 50’s, 60’s and 70’s.”
John Deere D140 riding mower equipped
1 Best Buy1 Worst Buy“My Porter Cable 18-volt, NiCd 4-tool combo kit includes a drill/driver, flashlight, circular saw, and a reciprocating saw which works great for trimming branches (www.portercable.com). I use at least one of these tools almost every day. Their batteries last a long time. If the batteries get sticky, I just spray silicone onto the contacts. That keeps them clean and makes it easy to put them on or take them off.”
On the negative side, he lists his Deere D140 riding mower equipped with a 48-in. deck. “The gas tank opening is too small, and because the tank is black, I can’t see the gas level. As a result, whenever I fill the gas tank I end up spilling fuel. Also, the tank only holds a little more than 2 gal. That’s a problem because the Briggs & Stratton engine is a gas hog and vibrates terribly. I wish now that I had fixed my 10-year-old Sears Craftsman riding mower equipped with a Kohler engine, instead of buying this one. I can’t believe Deere would put their name on this mower.”
“My 2011 Deere D140 riding mower is equipped with a cleanout on the mower deck and an hour meter that lets me know when it’s time to do service work. It’s a good mower.”
John Deere F932 commercial front-mount mowers
2 Best Buys0 Worst BuysJames’s best buys are two older model Deere F932 commercial front-mount mowers. “Several years ago Popular Mechanics suggested buying a commercial mower for big lawns rather than a ‘consumer’ mower. So I found these two used mowers. I use one for mowing and one for snowblowing. They’re built heavy with 3-cyl., 28-hp. engines, hydraulic lift, power steering, wide range hydrostatic drive, and brake-assisted steering. The one I use for snow blowing has a cab with lights, wiper, heater and a hydrauically-steered spout. These were inexpensive but still have a lot of life in them.
“My 1999 Toyota Camry 2.2l was purchased used with 70,000 miles on it. With regular maintenace, timing belts, a water pump, and valve cover gasket, we had over 400,000 miles on it before purchasing another Toyota.”
“I like my 1995 Deere F932 72-in. front mower. I use it to mow three grass runways on a small airport and two 5-acre farm lots with no problems. In the winter I replace the mower with a Deere 47-in. 2-stage snowblower which also works great. It’ll blow wet snow without plugging up.”
John Deere Gator 6x4
2 Best Buys0 Worst Buys“I have to nominate my 2004 Deere Gator 6x4 (model 3007D003). I bought it used in 2006. It has a Yanmar 3-cyl. diesel engine. Going on 20 years, and it’s never failed—no breakdowns. It’s incredibly reliable.”
“I bought a Deere Gator 6x4 in 2001. I just had it in for its first repair ever. It’s been a pretty inexpensive machine for all the years of use. We’ve run it almost continuously for all those years, keeping up with regular oil changes and maintenance service. We love our Gator.”
Rudy isn’t as pleased with his Sears 20-volt power tools. “The drills weren’t too bad, but the circular saw and reciprocating saw were worthless. A handsaw was faster. The saw batteries wouldn’t last 2 mins.”
John Deere Gator CX utility vehicle
2 Best Buys0 Worst Buys“Our 1995 Dodge Dakota pickup will soon turn 200,000 miles but still runs beautifully. We had one minor glitch with the transmission and have replaced the fuel pump, but otherwise this pickup has been trouble-free.
“We use our Deere Gator CX utility vehicle like a horse and buggy to get around our 240-acre ranch. Works great.”
“I’m well pleased with my 2007 Deere Gator CX utility vehicle. It’s handy and dependable and will go almost anywhere. The box tips up easily. My wife loves to drive this machine.”
John Deere Gator XUV550 utility vehicle
1 Best Buy1 Worst Buy“My 2014 Deere Gator XUV550 utility vehicle is my worst buy. The cable-based shift linkage and the centrifugal clutch are poorly designed. There are no brakes, and the centrifugal clutch lurches dangerously when starting and stopping. The gear shifter started to bind and lock up the first day. The problem got progressively worse, eventually completely locking up the transaxle and frequently leaving the vehicle stranded out in the field.
“The dealer told me to always put the vehicle in neutral, coast to a stop, and never park in gear or on an incline. The parking brake cable broke and kept stretching out of adjustment so that it wouldn’t keep the vehicle from rolling, which was another safety hazard. The winch cable broke and had to be replaced the first time it was used with a snow blade. The axle seals started leaking during the first few months and had to be replaced. The engine keeps loading up, blowing black smoke, and backfiring on idle. The dealer told me to run the engine wide open every time I drove in order to clean it out, because the low idle speed was preset to work with the centrifugal clutch. Another problem is that the oil has to be changed about every 10 hrs. because it gets so dirty.
“I bought an extended warranty for the vehicle because of all the repeated problems. By the end of the 3-year warranty - with only 60 hrs. on the unit - the gearshift and transaxle were locking up tight almost every time they were used. I went to the online Deere Gator forum and learned about a retrofit clutch kit designed specifically to correct the locking shifter and clutch-transaxle problem, but the dealer said my existing clutch was within spec and that a replacement wouldn’t be covered under warranty.
“I called the company and they agreed to pay for a new clutch kit, which appears to have fixed the lock-up issues. But the engine backfiring and parking brake cable adjustment issues are still problems, and I’m afraid to park the vehicle anywhere without blocking the wheels.
“With only 65 hrs. on the machine, the dealer wants more than what I paid for it to trade for a similar new unit. He did all he could and was helpful, but we’re very limited trying to work with such a poorly designed vehicle.”
“In 1973 I bought a Sears Craftsman 3 1/2 hp, 12-in. direct-drive table saw. It has always worked well and we still use it constantly. My friends tell me I should have a belt-driven model, but a belt-driven model couldn’t handle what this saw can. It’s built heavy and is a pleasure to operate.
“My 2013 Deere Gator XUV 550 utility vehicle saves a lot of steps. We use it to check our fence lines and our cows. Our grandchildren really like it, too.”
John Deere GT235 lawn tractor equipped
0 Best Buys2 Worst Buys“My Deere GT235 lawn tractor equipped with a 20 hp Briggs & Stratton engine is my worst buy. The engine started fouling spark plugs when it was only a month old. The air filter would become clogged with oil and would choke the engine until the plugs fouled. The company says they don’t warranty electrical parts. We would replace the air filter and install two new plugs and it would run good for four to six hours, but then the same problem would happen again. In three years we’ve replaced more than 50 spark plugs and 25 filters.”
“My 2002 Deere GT235 riding mower equipped with an 18 hp, 2-cyl. Briggs & Stratton engine is my worst buy. When it was only two months old the engine started smoking and missing. I cleaned the air filter and spark plugs, but within an hour the same problem happened again. I called the dealer, who transported the unit to his shop for repairs. When I picked it up later, I was told the air filter was dirty and had caused the spark plugs to fail. The company wouldn’t honor the warranty and charged me $75 plus parts. I called the company’s customer relations department but got no help. In three seasons of use, I’ve had to replace two spark plugs and an air filter about once a month during the mowing season. Now I have a 1-gal. can full of used spark plugs, and it costs me $20 to $25 each time they’re replaced.
“This is a good, tough tractor, but the engine is a big disappointment. I got no help from the dealer or the company and the engine problem still exists. I bought another brand last year and now use the Deere very sparingly.”
John Deere GT242 lawn tractor equipped
2 Best Buys0 Worst Buys“It’s the best machine I’ve ever owned,” says Larry about his 1998 Deere GT242 lawn tractor equipped with a Kawasaki 14 hp engine and a 48-in. deck. “I’ve replaced the belts and blades once. The original battery lasted 12 years.”
William Cheek, Franklinville, N.C.: “My 1993 Deere GT242 lawn and garden tractor works even better than I had expected. I use it to mow my 1-acre lawn as well as to plow and cultivate. It’s wellbuilt and does an excellent job.”
John Deere HPX 4-WD Gators equipped
1 Best Buy1 Worst BuyGary’s impressed with his 1992 Toyota Tercel equipped with a 1.5-liter engine and 5-speed manual transmission. “I paid $250 for this car, which had a rod out and 130,000 miles when I bought it. I spent $1,100 rebuilding the engine, which gets 35 to 45 mpg, depending on the weather. The car now has about 165,000 miles on it.
“My Ford Ranger pickup equipped with a 4.0-liter engine gets 16 to 20 mpg, which I think is pretty good. It has saved me a lot of money on fuel. I like not being tied to the gas pump whenever I go somewhere.
“Years ago we bought 4 Deere HPX 4-WD Gators equipped with Kawasaki gas engines where I work. The engines are very cold blooded, even when it’s 90 degrees outside. Deere tried to fix the problem but couldn’t. Their new Gators are now equipped with electronic fuel injection, which solves the problem. However, anyone who has the old carburetor-style engine is out of luck.”
“We have a lot of different Stihl power equipment, with a lot of different people operating them, and they all perform well. Some are more than 20 years old but still work fine.
“Our Deere HPX 4-WD Gators equipped with a 20 hp gas engine are worst buys. We bought four Gators and all of them are hard to start - even at temperatures of 90 degrees or higher. All of them have been back to the dealer at least once, and one model has been back twice. They run better now but they’re still tricky to start, even after they’ve been running at operating temperature. I don’t know why Deere didn’t make these Gators fuel-injected like they do on their 20 hp model 445 riding mowers.
“We had extra alternators put on, but it wasn’t long before a fan belt rubbed through the upper radiator hose. The same problem was starting to happen with another Gator before we caught it. To solve the problem we tied the hoses back. Another problem is that if you get the machine equipped with a R.O.P.S., you have to remove the windshield because otherwise it’ll suck in dust real badly. If you’re thinking about purchasing a Gator, I think it would be a real good idea to test one of them for a few days before you buy. A Gator equipped with a diesel engine might work better, but it costs a lot more. In my opinion, there are a lot of other brands on the market worth looking at.”
John Deere L110 lawn tractor
1 Best Buy1 Worst Buy“I purchased a 2004 Deere L110 lawn tractor from Sun South John Deere in Dothan, Ala. It has a Kohler 17.5 engine, an automatic transmission, and a 42-in. mower deck. Miscellaneous parts with normal wear have been replaced regularly. Approximately 5 years ago, I completed a full restoration, as shown in the photo above. After 1,000 hr, it still starts and runs like it did when I first bought it. Excellent purchase.
“Another best buy is my Black Max trimmer/edger. The only part I ever replaced was the primer bulb. It always starts on the first or second pull. Trimming string frustrates me, so I replaced the trimmer head with one that uses four zip-type ties.”
Ron’s unhappy with his Deere L110 riding mower and dump-style yard cart. “After cutting grass for years with a Yardman riding mower, I decided to upgrade to Deere. What a joke. I bought the mower with a mulching kit, but it just makes a big mess. I bought a bagger to use with it, but it plugs up something awful. I had to use my $50 Big R sweeper to clean up the mess. I put the bagged material in the dump cart, and the cart works great until I try to dump it. It won’t tip back far enough to dump. I don’t think it could dump a load of water!
“The engine on this machine runs fine, but it gets so hot under the hood that the headlight brackets and wiring melted.”
John Deere LA125 lawn tractor
2 Best Buys0 Worst Buys“My 2014 Deere LA125 lawn tractor has about 1,050 hrs. on it, but still has the original drive belt and has never been to the dealer for repairs. It’ll cut anything that’ll fit under the deck.”
“My 2010 Deere LA125 riding mower had only 168 hrs. on it when I had to replace the head and valves on the engine, as well as the bearings and shaft on the deck. I also had to replace the fuel pump after oil got sucked up in it because the valves wore out. My lady friend bought the same mower a week before I bought mine, and at 171 hrs. she had to replace the pulleys, shafts and bearings on the deck.”
John Deere LT 160 riding mower
1 Best Buy1 Worst Buy“My Leatherman tool and Leatherman Super Tool 200 are best buys (www.leatherman.com; ph 800 847-8665). I always carry the Leatherman with me and seem to use it every day, whether to grab something with the pliers or to cut twine off round bales. It costs a little more than other tools of its kind, but the quality is worth it. The best part is that if anything breaks, you can send the tool in to the company and they’ll repair it and send it back with no questions asked. The last one I sent in was returned to me within 6 days. I wish every company stood behind its products like this.
“My Deere LT 160 riding mower is my worst buy. The deck is a constant problem because it’s built way too light. Both wheels broke off, and the mounting bracket that holds the deck to the machine broke off. The deck is cracked where the mower blade spindles mount, and one of the spindles broke off. I had to put tubes in the mower’s tires because of slow leaks. The hydrostat transmission went out and I was told it wasn’t rebuildable. They wanted more than $600 for a new transmission. Now the fuel tank leaks.”
Martha’s the satisfied owner of a 2004 Deere LT 160 riding mower equipped with a 42-in. “Freedom” deck. “We use it to mow about seven acres in our campground. We have to mow around trees, water, electric poles, etc. Since there’s no discharge on this mower we can get close to objects on either side, and we don’t have to worry about throwing gravel at windshields. We haven’t had any mechanical problems. The Freedom deck mulches even damp grass.”
John Deere LX178 lawn tractor equipped
2 Best Buys0 Worst Buys“My 1991 Deere LX178 lawn tractor equipped with a water-cooled engine has worn out 2 mower decks, yet has required only routine maintenance. It still doesn’t use any oil.
“My GM Envoy XL has more than 92,000 miles on it and is a best buy.”
“I’ve had good luck with my 1993 Deere LX178 riding mower equipped with a water-cooled engine. It has done a lot of cutting and has gone through two decks. The tractor itself is like new. It’s my best buy. “My 1990 Ford F-150 pickup is my worst buy. It’s had electrical problems and now the paint is peeling off. The dealer wouldn’t help and the company won’t help pay for the cost of repainting it. I think my next pickup just might be a Dodge.”
John Deere LX255 tractor
2 Best Buys0 Worst Buys“My 1999 Deere LX255 tractor is my best buy. Over the years I’ve had to replace just one belt and the blades. I use a snowblower with it which has also been trouble-free.”
“Our Deere LX 255 riding mower is one of the best mowers that we’ve ever owned. We mow six yards with it every week, and the only parts that we’ve had to replace are belts and pulleys.”
John Deere LX 277 riding mower
1 Best Buy1 Worst Buy“My 2003 Deere LX 277 riding mower has never failed to start and is my best buy. It has more than 360 hours on it with no problems and still has the original battery.
“My 2001 GM 4-WD pickup is dependable and a best buy. I replaced the tires at about 47,000 miles and the battery when the pickup was five years old. It now has about 55,000 miles on it.”
“It’ll cut any kind of mild steel, from 28 ga. roofing steel to 1-in. bar stock,” reports Terry about his portable Milwaukee 8-in. metal cold cut saw. “The thicker the metal you’re cutting, the slower you go to keep the motor from overheating. Cutting with this saw creates very few sparks and a burr-free cutting edge.
“My Deere LX277 riding mower is my worst buy. The tractor itself works fine, but not the mower deck. The deck is suspended from the tractor which creates a very uneven job of cutting. I tried using new blades and adjusting the gauge wheels according to the owner’s manual, but nothing helped. Putting the correct air pressure in the tires didn’t help, either.”
John Deere Sabre lawn tractor
1 Best Buy1 Worst Buy“My Deere Sabre lawn tractor is my worst buy. I bought it for mowing my lawn and for towing a small 2-wheel cart. The transaxle broke and the replacement cost was only partly covered by the warranty, after much ‘discussion’ with the dealer. Also the frame broke just ahead of the drive wheels, and the deck is hard to remove. What a piece of junk.”
A 2002 Deere Sabre riding mower equipped with a 17 hp engine and 48-in. deck rates as Timothy’s “best buy.” “It cuts better than any other mower I’ve owned. I replaced the battery, but otherwise it has required only routine maintenance.”
On the negative side, he lists his 2003 Troybilt walk-behind weed trimmer. “If you try to use it on anything other than flat ground it’ll cut down into the dirt, which causes it to use up massive amounts of string.”
John Deere STX 38 garden tractor equipped
2 Best Buys0 Worst Buys“Last year I bought a used 1991 Deere STX 38 garden tractor equipped with a 12 1/2 hp Kohler engine and a grass catcher, and it has become a best buy. I bought it with a broken hood and a bad magneto, but the price was right. It runs good and saves my back from a lot of raking.”
“My 1998 Dodge quad cab shortbed pickup equipped with a Cummins diesel engine is my best buy.
“My 1998 Dodge pickup has a lot of power and is fuel efficient. It also rides nice.
“My Deere 1750 Max-Emerge Plus conservation planter does a nice job of planting and is easy to maintain. No problems.
“My Ford New Holland bi-directional tractor is a pleasure to drive. I use it to oper-says Jack, pleased with his Deere STX 38 riding mower.
“My Deere TRS 21 snowblower has better balance and snow throwing power, in both light and wet snow, than a Toro 2000 snow-blower.”
John Deere X360 riding mower
2 Best Buys0 Worst Buys“I’m still driving my 2002 Toyota Sienna minivan which is the best car I’ve ever owned. No major repairs have been needed – just new tires, battery, and brakes.”
He has had a problem with his 2011 Deere X360 riding mower. “In order to attach my snowblower, I have to remove the deck first, which means I have to lay on the floor and work in the dark with one hand. The snowblower goes on easier than the deck comes off.”
“My Deere X360 riding mower is equipped with power steering, a tilt steering wheel, and hydraulic deck lift. It turns sharp and is a fine machine.
“My New Holland RB 450 round baler had some minor problems at first but the dealer fixed them, and now it works fine. It’s important to have a good battery and charging system on your tractor, because the computer on these balers requires a full 12 volts all the time.”
John Deere X370 lawn tractor equipped
2 Best Buys0 Worst BuysRoy’s the satisfied owner of a 2017 Deere X370 lawn tractor equipped with a Kawasaki 18 1/2 hp. engine. “I love this machine. It has power steering and a hydraulic lift deck, and to switch to mulching the grass I just pull a lever. Before I bought this model I owned four X300’s that I used in my mowing and landscaping business for years, and they were great, too. I put up to 1,100 hrs. on them without a bit of trouble. These are great mowers.
“The belts kept coming off both of my Cub Cadet LT 42 riding mowers and I had a lot of trouble with blades bending. The first mower had to be worked on 6 times with less than 23 hrs. on it. The engine blew up on the second mower with only 125 hrs. on it.”
“I like my Deere X370 riding mower equipped with a 60-in. deck. However, I’ve had problems with my Deere X745 equipped with a 62-in. deck. Often it won’t start due to a problem with the fuel solenoid on the carburetor.”
John Deere X495 riding mower
2 Best Buys0 Worst BuysMarshall likes his Deere X495 riding mower. “Over the years I’ve owned many other Deere mowers including models 322, 425, and 455. Their mowers just keep getting better and better. No problems.
“My Stihl 250 Weedeater has more than 1,000 trouble-free hours on it. Works great.”
“Our 2003 Deere X495 garden tractor equipped with a 3-cyl. Yanmar diesel engine and 54-in. mower deck is our best buy. It does an excellent job mowing, has a lot of power, and a comfortable ride. I use the mower on two acres around our home and farm buildings. Deere equipment is more expensive, but I think it’s worth the additional cost.” wheels. I’ve had problems with them breaking and can’t get anyone to help. The small lugs on the front wheels make this tractor very unsafe to operate. Because of this dangerous condition I don’t recommend this tractor to anyone. I’d appreciate hearing from anyone else who’s had similar problems with Landini tractors. I can be reached at [email protected]. “
John Deere X500 riding mower
2 Best Buys0 Worst Buys“My 2006 Deere X500 riding mower has never been in the shop and still has the original belts, tires and battery. It pays to buy the best.
“After selling my 1999 Chevrolet 3/4-ton pickup I felt like a new truck would be a good idea. Ford had great deals in 2009 when everyone else was having money problems. So I bought a new Ford F-250 pickup. However, it got only 9 mpg and lacked the power to tow my trailer and tractor. So a year later I sold it and bought an old 1998 Chevrolet 1/2-ton, 4-WD shortbed model with about 107,000 miles. It still runs like a top.”
“My 2006 Deere X500 riding mower equipped with a 54-in. deck and powered by a 25 hp Kawasaki vertical shaft engine is my best buy. No problems.”
John Deere Z425 riding mower
2 Best Buys0 Worst BuysSears is the owner of a Deere Z425 riding mower. “For what this machine costs, you’d think they’d put a more comfortable seat on it. I put springs on the seat but it still isn’t comfortable. Any ideas?”
“I’m pleased with my Deere Z425 riding mower equipped with a 48-in. deck. It has a lot of power and is a reliable machine.
“My Stihl MS290 chainsaw is a best buy.”
John Deere Z540R zero-turn riding mower
2 Best Buys0 Worst BuysPhil’s impressed with his 2018 Deere Z540R zero-turn riding mower. “It starts easy, has a comfortable ride, and turns easy. It also has high speed blades for a clean cut.”
“It’s a pleasure to operate and has greatly reduced my mowing time,” says Earl about his 2019 Deere Z540R zero-turn riding mower. “I use this mower with a mulching kit that activates with the flick of a lever. This machine turned out to be a nice complement to my 2016 Deere X590 garden tractor which I use with a mower deck, leaf bagger, and snowblower. The snowblower had a belt problem, but otherwise it’s a really nice outfit.
“One of the best small pieces of equipment I own is the tank-type air compressor I bought new in 1957. It was made by E.L. Smith and Sons. It has performed flawlessly with occasional use, and I think the secret to its long life is that I let the air out of the tank after each use. The compressor is still in its original condition.”
John Deere combine
1 Best Buy1 Worst BuyPaul pulls a Remlinger 3-bar drag equipped with double rolling baskets behind his field cultivator. “It leaves a nice seedbed as long as I go 7 mph or less, and it lets us work the ground closer in field corners than we could with a roller. The mounting baskets on it are a little light considering how heavy the drag is. But company service is great.
“We’ve had to replace several belts on our Deere combine including ones for the rotor, accelerator, and feederhouse. Some belts barely lasted a single season, while others didn’t even last that long. I don’t know who makes these belts, but they’re junk.”
Don Crowe, Wallaceburg, Ontario: “My worst buy of all time wasa 1969 International Harvester 915 combine,” says Don, who custom combines. “It never worked a full day without breakdowns and made us a laughing stock. The service manager said he didn’t know anything about the combine and parts were never available. We had many customers angry at not only us, but International as well when we couldn’t harvest their crops. Weeven had to call in a neighbor who owned a Deere combine to harvest our own crops. In desperation I called the company in Chicago for help, but I was treated very badly. “My 1989 Deere 4450 front wheel assist tractor is a super tractor. No breakdowns.”
John Deere pressure washer cost
2 Best Buys0 Worst Buys“My 2000 Kubota 3410 4-WD diesel tractor is a best buy. It’s easy on fuel, handles well, and has all the power I need.
“My 2002 Chevrolet Duramax 3/4-ton diesel pickup is also a best buy. It gets about 22 mpg and the ride is great. I use it to pull my 24-ft. flatbed trailer loaded with a tractor and disk. I’ve had no problems at all with it. The diesel engine runs a lot quieter than the diesels in Ford and Dodge pickups.
“My Deere pressure washer cost $550 but never worked right from the start. I took it back to the dealer but he couldn’t get it to work either. I finally bought a different model at Home Depot for $350 that works fine.”
Paul Cullen, Ronan, Mont.: “My Deere 2010 diesel tractor cost a fortune and hasn't held up as advertised. I can’t get parts exee) Sew rst Buys evious page) ceptthrough a Deere dealer, and the dealers and mechanics don’t know their product. Now know why these tractors are the color of money.”
John Deere equipment
2 Best Buys0 Worst Buys“Over the years we’ve been extremely happy with the performance of Deere equipment. However, we recently purchased a Deere 326 skid loader equipped with a hydrostatic transmission that’s noisy and stiff. Also, the transmission won’t go into low range unless the engine is turned off. Now no one wants to drive it so the machine sits unused in our barn.
“Our 2015 Case 210 skid loader runs smooth and quiet and is a pleasure to operate. Perhaps Deere could learn from this company just how to build a skid loader.”
“I can’t quite believe all these farmers have as much good luck with their Deere equipment as they say they do. My son, who is in the excavating business, bought a new Deere 650 dozer for $80,000. It’s his worst buy. The machine is unusable about 50 percent of the time. The dealer he works with must be factory trained at making up excuses as to why the dozer can’t be fixed. My son has lost a lot of money on account of machine downtime. Bulldozers have had hydraulic blades that go up and down for more than 50 years, but not this Deere.
“The dealer finally told my son that nothing can be done as all these models are like that and it will take two years before the company can develop a new valve. They didn’t offer him a replacement machine while his was down, either. He finally got sick of this piece of junk and traded it for a Cat.”
John Deere corn head
2 Best Buys0 Worst BuysA 1991 New Holland TR86 combine equipped with rear wheel assist rates as James’s “best buy”. “I use it in a variety of crops including wheat, corn, soybeans, and buckwheat. The 7.8-liter 6-cyl. engine has a lot of power. The combine has twin rotors and a grain pan under them which, along with a straight-out grain auger, results in excellent grain quality. That’s especially important to me because I grow soybeans for seed. It turns short and the hydraulics, controls, cab comfort, and visibility are excellent. Last year most of my buckwheat was wet and green at harvest and a lot of the soybeans were short, but I didn’t have any problems. I had to use the feederhouse reverser only once in about 130 hours of operation. It also did a nice job shelling corn with minimum loss. Corn quality was excellent. “I use a New Holland 973 20-ft. grain platform and a 6-row Deere corn head with the combine. The grain platform is one of the best on the market today. The lateral float feature works great. The machine is easy to service and repair and is also easy on fuel. I recommend using a chaff spreader with the combine.”
Gary Harrison, Albion, Mich.: “It’s a much better all around pickup than the 1982 Chevrolet I owned previously,” says Gary, pleased with his 1989 Chevrolet 3/4 ton pickup. “The engine has a lot more get-upand-go, the doors close much better, and the transmission doesn’t clang when I put it in reverse.” Gary bought a new Case IH 900 planter to replace his old TH 400. “I use it mostly to plant no-till. It works great and doesn’t require a lot of maintenance.” Gary says he also purchased a Bish head changer for his Gleaner combine after reading about the head changerin FARM SHOW. “It’s costly, but works real good along with my Deere corn head.” He adds that his Simplicity mower “outcuts all other mowers.” On the negative side, “I replaced my 10ft. Woods rotary mower with a Bush-Hog model. That was a big mistake as I could have boughtthe Woods cheaper, but thought I'd like the new type of chatter-free pto. I do like the pto but that’s aboutall. Itdoesn’t cut as nice and smooth as the Woods did.”
John Deere model
2 Best Buys0 Worst Buys“It gets a lot of hard use, but we’ve had very little trouble with it,” says David about his 1998 Kawasaki Prairie 400 4-WD ATV. “The company took care of a few minor problems. I have an artificial leg so I appreciate the automatic transmission. The floor board design is also helpful. There are more powerful ATV’s on the market, but after riding them for a while I really came to appreciate this machine.”
“My 1979 Ford F-250 4-WD pickup is a best buy. It has been all over the country and has been in a few tangles that required some hospitalization, but it came away better for it all.
“My 1972 Deere 4620 and 3020 tractors are dependable and are best buys.
“I’m well pleased with my Deere 535 round baler. I’ve owned Hesston and Gehl models before but this is the best.
“My biggest disappointments have been with my Case-IH 470 and 480 21-ft. disks. In my opinion, these discs were nothing but glorified sheet metal. I sold both of them and bought a Deere 14-ft. model. I can cover the same amount of ground as I had been covering with the two Case-IH models, and do a better job. No problems.
“My Hesston 6650 swather is a disaster. I don’t understand how a company can even put its name on a machine like this. I wish I still owned my Deere 1600 14-ft. hydraswing swather.
“I was given a kit to raise the rear bench seat in my 1985 Ford Supercab pickup. It was purchased through J.C. Whitney and was something that I had asked for. However, it’s a worst buy. The bolt holes in the brackets were about three sizes too big, the washers were too small, and I had to reshape some of them to fit. I was really disappointed with it.”
Harvey Cannon, Spur, Texas: “It's a pleasure to operate and is a high capacity machine,” says Harvey about his “best buy” Case-IH 8380 mower conditioner, “I've used it for three years with only minor problems. It has a low side draft and the header has good floating action. It’s quite an improvement over the older Deere model that I had been using.”
John Deere 100 series riding mower
0 Best Buys1 Worst BuyWalter nominates his Deere 100 series riding mower as his “worst buy”. “I like the tractor but not the mower deck. The wash port on it is useless. The paint on the deck flakes off in chunks as big as my hand, and the underside of the deck is difficult to clean.”
John Deere 1025 4-WD tractor
1 Best Buy0 Worst Buys“I like my 2021 Deere 1025 4-WD tractor with cab and loader. It starts on the coldest days and runs great. I use it for odd jobs. It plows snow without added weight. It’s also good on fuel. It’s a very handy compact.
“My 2017 Polaris Ranger 570 is an excellent machine. I’ve only had to replace the battery.
“I regret buying a 2021 Thor motorhome. Things were falling apart before I got it home. The 3-mode refrigerator would only run on one mode. The bathroom door fell off, the water heater leaked, and the valances fell off. The Chinese battery is junk. The cabinets and drawers were loose. The only good thing is the Ford diesel drivetrain.”
John Deere 1025R TLB subcompact utility loader
1 Best Buy0 Worst BuysRonald’s the satisfied owner of a 2014 Deere 1025R TLB subcompact utility loader tractor equipped with a backhoe. “It has more features than the competition, with a better price and financing than some other brands I checked out. I really like the quick change loader bucket.
“The tractor starts well even in cold weather and has decent traction when plowing snow, even without tire chains. It has a very short turning radius, which makes tilling small gardens with a 4-ft. rototiller an easy job.”
John Deere 1050
1 Best Buy0 Worst Buys“My Deere 1050 and 870 tractors are just so user-friendly. Easy on and off. Just a pleasure to work with.”
David hasn’t had such a positive experience with his Deere 955 tractor and LA115 lawnmower. “The 955s rear PTO seal leaks, and it’s not a bolt-on part. The whole bead end has to come off—not fun. Both the 955 and LA115’s paint comes off in pieces the size of a slice of bread. Deere got cheap and didn’t use any primer. Paint flakes off to bare steel, meaning rust.”
John Deere 10504-WD tractor
1 Best Buy0 Worst BuysD.L. Goodwin, Monroe, Va.: He says his 1989 Deere 10504-WD tractor “doesn’t bog down or swing when pulling two 14-ft. plows. It’s a little slow, but makes up for it in versatility. However, the gears in high and low range need to be rearranged because the low reverse gear is too slow,”
John Deere 1090 tractor
1 Best Buy0 Worst Buys“My Deere 1090 tractor is fun to use and is the best tractor I’ve ever operated. It’s fuel efficient and starts right up every time.
“My Ryobi 31 cc weedeater is my worst buy. I spend more time trying to keep the string on the spool than I do controlling weeds.”
John Deere 112 10 hp garden tractor
1 Best Buy0 Worst Buys“Our best buy of all time is our 1968 Deere 112 10 hp garden tractor which we bought used in 1972. It works great. We use it to mow the lawn, blow snow, and haul stuff around our yard. The starter was rebuilt once and all the transmission gears were replaced three years ago. It’s done a lot of work for us.”
John Deere 112L garden tractor
1 Best Buy0 Worst BuysMichael’s the satisfied owner of a 1985 Deere 112L garden tractor. “I use it regularly in our lawn care business. We attach it to a Cyclone Rake leaf collector every fall to collect and clean up leaves. The tractor is powered by a Kawasaki engine that has never been touched. There’s no hour meter on the tractor, but we change the oil every couple of months no matter the use.”
John Deere 120 electric pressure washer
0 Best Buys1 Worst Buy“My Yamaha 4-wheeler is easy on fuel and is always ready to go.
On the negative side, “The main bearing on my Deere 120 electric pressure washer won’t last. The company doesn’t have parts for it and says it can’t get them.”
John Deere 120 15 1/2-ft disk
0 Best Buys1 Worst BuyJames Preston, Vilna, Alberta: “My worst buy is my Deere 120 15 1/2-ft. disk. It’s built too light and is impossible to set so it'll do a good job. I tried all summer to set it, but had no luck. I finally gave up and dumped it.”
John Deere 1209 Haybine
0 Best Buys1 Worst Buy“My dad bought my best buy 1978 International 1086 tractor in the mid 1980’s and I bought it from him in 1990. Together we’ve put 8,000 hours on it and all we’ve ever had to replace was the clutch.
“My 1992 Case-IH 9230 4-WD tractor can pull a 35-ft. deep tiller with ease and is stingy on fuel. The cab is so comfortable I can ride in it for 12 hours without getting tired.”
On the negative side, he lists his Deere 1209 Haybine. “The wobble box lasted only about 150 hours. Another problem was that the reel teeth were poorly designed and broke very easily.”
John Deere 125 riding mower equipped
1 Best Buy0 Worst Buys“I’m happy with my 2009 Deere 125 riding mower equipped with an automatic transmission. It has more than 360 hrs. on it with no problems and still has the original belts.”
John Deere 12-row 7300 planter equipped
0 Best Buys1 Worst Buy“Our Deere 12-row 7300 planter equipped with a vacuum metering system is my worst buy. It has trouble keeping an even planting population whenever I go more than 5 mph. We were assured by the dealer and by the operator’s manual that it would plant accurately at speeds of up to 7 mph or more.”
John Deere 12-volt battery-powered power luber
1 Best Buy0 Worst BuysNeal nominates his Deere 12-volt battery-powered “power luber” grease gun as his “best buy”. “With a conventional flexible grease tube you need another person to hold the coupler on the fitting. But with this battery-powered gun, I can use one hand to pull the trigger and my other hand to hold the hose on the zerk fitting.
“My Black & Decker drill is my worst buy. It has a keyless chuck that won’t hold a bit no matter how much I tighten it. They offer a 5/8-in. drill bit but they cut the shank down to 3/8 in., which is so thin that it can bend. The shanks should be 1/2 or 1 inch in diameter.”
John Deere 1350 disc mower-conditioner
1 Best Buy0 Worst BuysJames Hilton, Athens, Me: “I’’ve used it on 350 acres-and haven't plugged it up yet,” says James, pleased with his 1988 Deere 1350 8-ft. disc mower-conditioner. “Repairs have been limited to a few knives that cost only $1.50 apiece.” James also likes his Fahr 16-ft. tedder, the second one he’s owned. “It’s reliable and really covers ground fast.”
John Deere 140 garden tractor
1 Best Buy0 Worst Buys“In 1990 I bought a one-owner 1984 Ford F-150 302 4-WD pickup. Outside of regular maintenance and replacing the radiator, it just keeps on going at 26 years old.
“My 1971 Deere 140 garden tractor with a mower and snowblower is one of the best machines I’ve ever owned. I bought a bigger tractor to blow snow a couple years ago but I still use the 140 to mow lawn at almost 50 years old.”
John Deere 1420 riding mower equipped
1 Best Buy0 Worst Buys“I got rid of my Grasshopper zero turn mower because the drive wheels dug up the turf whenever I changed directions.
“Now I own a Deere 1420 riding mower equipped with a 60-in. mower. It’s both my best and worst buy. I like using this mower on level ground, but not on steep slopes. The unit has too many built-in safety gimmicks that shut down if I squirm on the seat or hit a bump. To solve the problem, I built a 150-lb. counterweight that keeps the mower stable on slopes (see story on page 18). My dealer refuses to disconnect the safety features for liability reasons.”
John Deere 145 garden tractor broke
0 Best Buys1 Worst Buy“My 2008 Kubota L2800 tractor is well built, with controls that are easy to use and a sturdy engine.
“My 2006 Deere 145 garden tractor broke down with only about 50 hours on it, due to a bad engine. The company wouldn’t stand by its product and pay for the repairs.”
John Deere 146 front-end loader
1 Best Buy0 Worst BuysRichard Haynes, Murfreesboro, Tenn.: Richard nominates his Ford 8700 tractor as a “best buy”. “It’s fuel efficient and the weight is evenly distributed so I don’t have . to load down the rear wheels with add-on weights. I used Westendorf quick attach brackets to mount a Deere 146 front-end loader on it. I simply pull up 2 levers, drop the brackets down, and back out. It takes longer to get on and off the tractor than it does to change from bucket to bale spear.”
John Deere 1470 rotary mower
1 Best Buy0 Worst BuysBruce’sDeere 1470 12-ft. rotary mower has reduced his hay cutting time by 1/3 to 1/2 and is a “best buy”. “It’s simple to maintain and the blades are easy to keep sharp. I haven’t plugged it up yet. “I also like a cattle sorting stick made byKoehn (Koehn Marketing Co., Box 577, Watertown, S. Dak. 57201 ph 800 658-3998). Works great for sorting cows and for holding cows back when I’m working with baby calves. It’s durable and effective. The only problem is that other people always want to borrow it. I had to put my name on it so I could keep it.”
John Deere 1508
1 Best Buy0 Worst BuysJim Hrdy, El Reno, Okla.: Jim's had good luck with his 1988 Case-IH 7140 tractor. “T put over 1,000 hours on it every “This tractor stands up to use by high school and college kids who work for me during the summer. It's greenhorn driver tough.” year. It had some minor electrical problems but the dealer solved them. This tractor stands up to use by high school and college kids who work for me during the summer. It's greenhorn driver tough. “Tlike my 1984 International 1950 truck equipped with an 18-ft. bed and hoist. It’s powered by a 6-cyl. diesel engine and has 120,000 miles, It's the most dependable truck on the market in my opinion, I also have Chevrolet and Ford trucks but they can’t match this truck’s performance. I'ma custom harvester and use this truck to pull a Case-IH 1680 combine from Oklahoma to South Dakota, I never have to stop. I’m well pleased with its durability.” Jim says he had bad luck with his 1989 Deere 1508 mower from the start. “It’s the only mower I've ever owned where I had to mow everything twice in order to get a good cut, even with sharp new blades. I had to constantly replace U-joints on the main driveline. The dealer stood behind the mower until the warranty ran out and then it was mine. After about 4 years of putting up with it, traded it off for a Deere 1518 mower. It works good. No problems.”
John Deere 1518
1 Best Buy0 Worst BuysJim Hrdy, El Reno, Okla.: Jim's had good luck with his 1988 Case-IH 7140 tractor. “T put over 1,000 hours on it every “This tractor stands up to use by high school and college kids who work for me during the summer. It's greenhorn driver tough.” year. It had some minor electrical problems but the dealer solved them. This tractor stands up to use by high school and college kids who work for me during the summer. It's greenhorn driver tough. “Tlike my 1984 International 1950 truck equipped with an 18-ft. bed and hoist. It’s powered by a 6-cyl. diesel engine and has 120,000 miles, It's the most dependable truck on the market in my opinion, I also have Chevrolet and Ford trucks but they can’t match this truck’s performance. I'ma custom harvester and use this truck to pull a Case-IH 1680 combine from Oklahoma to South Dakota, I never have to stop. I’m well pleased with its durability.” Jim says he had bad luck with his 1989 Deere 1508 mower from the start. “It’s the only mower I've ever owned where I had to mow everything twice in order to get a good cut, even with sharp new blades. I had to constantly replace U-joints on the main driveline. The dealer stood behind the mower until the warranty ran out and then it was mine. After about 4 years of putting up with it, traded it off for a Deere 1518 mower. It works good. No problems.”
John Deere 1520 tractor equipped
1 Best Buy0 Worst Buys“My 1994 Chevrolet 4-WD 3/4-ton pickup has been trouble-free. It has a GVW rating of 8,600 lbs.
“My Deere 1520 tractor equipped with a diesel engine and high-low shift transmission is still my favorite tractor, although I also own two larger and newer Deere models. The company’s older tractors had simpler features and their transmissions worked better.
“In 50 years of farming the worst product I ever bought was Motto high tensile barbed wire which I bought from Southern States Cooperative. The wire comes with an alternating twist between each barb. After installing several miles of this fence over two or three years I began to notice that some of the strands between posts were very slack. The problem is that if a deer or a calf runs into the wire, or a limb falls onto it, the impact causes the strand to unwind a foot or so. That’s because the twist reverses from right hand twist to left hand twist between each barb. The wire is very hard and difficult to splice, so to repair it you have to replace whole sections between posts. I’d be glad to give away this wire to anyone who wants to come and remove it from my fences.”
John Deere 1530 diesel tractor
1 Best Buy0 Worst BuysW.A. Gibbs, Elmwood, Tenn.: He nominates his 1974 Deere 1530 diesel tractor as his all-time “best buy”. “This tractor has been a jewel and is without doubt the toughest tractor I've ever seen. It pulls a Deere 410 hay baler in fifth gear in heavy windrows and has done some of the hardest bush hogging work any tractor ever did. “It's been a jewel and is without doubt the toughest tractor I've ever seen.” “My 1983 Ford LTD car equipped with a V-6 3.8-liter engine is still going strong. It has 116,000 miles and is a pleasure to drive, Very little rouble, “My 1979 Datsun 210 car has 170,700 miles, It still has the original engine and uses very little oil.”
John Deere 15-40 motor oil
1 Best Buy0 Worst Buys“I’ve spent more than 50 years operating farm equipment, and Deere 15-40 motor oil is one of the best oils I’ve ever used. I use it in my 2006 Chevrolet diesel pickup. With other oils I could go about 6,500 miles between oil changes, but with Deere 15-40 I can go about 8,500 miles. I use Deere 10-30 oil in all my small engines. I’ve never had a motor problem with Deere products of any kind.”
John Deere 1590 no-till grain drill
1 Best Buy0 Worst BuysDouglas nominates his 2008 Deere 1590 15-ft. no-till grain drill as his “best buy”. “It does a good job and is easy to pull. I had to make a drawbar support for my Deere 2955 tractor because the drill is equipped with a straight hitch. Otherwise, the tractor has no trouble handling the drill.
“I’m well pleased with my Deere 720A zero turn riding mower.”
John Deere 160 riding mower
1 Best Buy0 Worst Buys“My 1986 Deere 160 riding mower performs with excellence and is my best buy.”
John Deere 1600A Haybine
1 Best Buy0 Worst Buys“Our 1990 Case-IH 7120 tractor, which we bought used, is a best buy. It has more power than its rated at and the 18-speed powershift transmission works great. It has a comfortable cab and axles that are heavier than the ones on Deere tractors.
“OurDeere 1600A Haybine runs quiet and the head floats in just about every direction.
“OurAgri-Trend dump wagon will dump just about any material.”
John Deere 1630 2-WD tractor
1 Best Buy0 Worst Buys“My best buy is my 1976 Deere 1630 2-WD tractor. I have no idea how many hours are on it because the tachometer clock quit working 10 or 12 years ago. However, it must have at least 8,000 to 10,000 hours by now. It was originally bought as a loader tractor and was accidentally submerged in a pond when it was new. Fortunately there was no serious damage to the tractor. It still has the original clutch and engine and doesn’t use any oil. Over the years I’ve replaced tires, batteries, fuel injectors, and a tachometer.
“The power steering system on this tractor works better than the power steering on any car or tractor I’ve ever had. The engine needs some work done to it, but as long as it starts and runs I’ll keep using it. This 24-year-old tractor has more power than my Deere 2350 4-WD tractor. My only problem was that it always started hard whenever the temperature approached freezing. I finally solved the problem by installing a large highway tractor battery in it, which I should have done years ago. Now it starts fine.”
John Deere 165 riding mower
1 Best Buy0 Worst Buys“It’s a good looking tractor with a roomy cab and good visibility,” says George, pleased with his 1998 Zetor 105-40 tractor. “It rides nice and handles like a Cadillac. It’s a no gimmicks, straight forward tractor with a 3-speed power shift transmission. It’s also fuel efficient and uses only two gallons per hour while pulling a 5-bottom plow. I was so impressed with it that I recently bought a second model.
“My worst buy is the Deere harrow attachment I mounted on my disk. The problem was that the teeth kept breaking. I used it for only one spring. I finally took it off the disk and threw it away.
“I’ve been using my Deere 165 riding mower for 14 years and it still looks like new. No problems.”
John Deere 1750 6-row corn planter equipped
1 Best Buy0 Worst BuysSteve’s impressed with his 2001 Deere 1750 6-row corn planter equipped with a Rawson Zone Till cart. “This planter is accurate and reliable, like the other Deere planters we’ve owned. It works well with the Zone Till cart and sometimes does a better job of planting than conventional tillage.”
John Deere 175 Hydro lawn mower
0 Best Buys1 Worst Buy“My 1997 Buick LeSabre car is my best buy. It gets 31 to 36 mpg on trips and handles great. A very comfortable ride.”
“My Deere 175 Hydro lawn mower is my worst buy. The engine didn’t start well until I installed an electric fuel pump on it. It also ‘ate up’ belts until I lined the pulleys up. I bought it new so I expected better.”
John Deere 177 riding mower equipped
1 Best Buy0 Worst Buys“My 1999 Chevrolet 1/2-ton pickup equipped with a V-8 4800 engine is a best buy. No problems after 6,000 miles. It performs extremely well and is fuel efficient.
“My 1999 Deere 177 riding mower equipped with a hydrostatic transmission and 48-in. deck is a best buy. It’ll cut twice as much grass as other mowers we’ve had and has a very short turning radius. It has a comfortable ride and is built tough.”
John Deere 1770 no-till planter
1 Best Buy0 Worst Buys“Last year we bought a Kinze 16-row Edge Vac bulk fill planter. It’s our worst buy. This planter messed up the population and spacing on all our corn acres. The worst 160 acres had to be replanted, and all the rest had real poor seed spacing ranging from 2 in. to 6 ft. This happened even though the monitor indicated everything was okay. We replaced the monitor, seed unit, a bristle auger (the bristles fell off), and cracked bucket chains but that didn’t help. Another problem is that the bulk fill tank is complicated and hard to clean out.
“Buying from a local Iowa company, we expected fair treatment but we don’t feel that we received it.
“We replaced this planter with a Deere 1770 no-till planter before planting beans last year, and we’re pleased enough to call it our best buy.”
John Deere 1770 16-row no-till planter
1 Best Buy0 Worst BuysLarry’s impressed with his 2002 Deere 1770 16-row no-till planter. “I can fold the planter from the tractor cab. Once it’s folded, it’s no wider than the dual wheels on my tractor. The company sent people from the factory to monitor the planter’s performance in the field and to evaluate some minor changes and updates. Support has been great.
“My 2001 Deere 9650 STS combine does a fine job. It has plenty of capacity for my 8-row corn head and 25-ft. platform.”
John Deere 1780 15-row soybean planter
1 Best Buy0 Worst BuysBill’s the satisfied owner of a 1999 Deere 1780 15-row, 15-in. soybean planter. “I bought this planter to replace a no-till drill which I had been using to plant soybeans. It’s equipped with vacuum metering seed boxes which results in a very accurate and even stand. I’m able to use the same monitor in my tractor cab that I use with my Deere 7200 12-row, 30-in. corn planter. I’ve used the 1780 to plant no-till in standing corn stalks as well as in tilled ground. It plants seed at an even depth and has produced excellent stands under both conditions. The planter can be adjusted from no-till to conventional till and back by making some simple adjustments.
“However, I wouldn’t want to use this planter to plant corn because I still use bags, and when the extra row units are raised in the non-use position they’re in the way for filling the seed boxes. For planting soybeans I use 3-bu. boxes which can be easily filled by a bulk bean tender.”
John Deere 180
1 Best Buy0 Worst BuysJim Knetzer, Carlinville, Ill: A 1987 Deere 180 lawn and garden tractor rates as Jim's “best buy”. “I’m completely satisfied with it. It has plenty of power, handles well, and is easy to shift. “I'm not happy with the fuel economy on my 1994 GM Astro conversion van. It gets only 17 to 18 mpg at the most. We were told we'd get 20 mpg or more on the highway.”
John Deere 20 hp
1 Best Buy0 Worst Buys“Everything on this tractor works really well and is simple to operate,” says Lee, impressed with his 2002 Deere 20 hp GT 245 garden tractor. “I use it with a 30-in. tiller, 48-in. blade, and 54-in. mower deck. This tractor is built heavy and is easy to service. Also, it’s easy to change implements.”
John Deere 2003 JX345 riding mowers inside
1 Best Buy0 Worst Buys“With less than 200 hrs. on my 2007 Case New Holland JX1060C 50 hp tractor, the hand throttle cable broke and had to be replaced. Now with 481 hrs., the replacement cable has also broken. I called the company to see if they had a recall, but they just said I should take the tractor to the dealer for repairs.
“Instead, I ordered a flexible control hand throttle cable through Messick’s and will replace it myself. I want to know why New Holland won’t declare a recall on their throttle cable, as I know other owners of New Holland tractors with the same problem.
“I kept both my Deere 2003 JX345 riding mowers inside a building whenever I wasn’t using them, yet the seat cushion on both has come loose from the frame. The company needs to fix this problem on all its riding mowers.”
John Deere 200CX front-end loader
1 Best Buy0 Worst BuysBrian’s glad he bought a Deere 200CX front-end loader for his Deere 2305 tractor. “About 3 years ago our Deere 318 garden tractor and snowblower were having problems. I took the tractor and snowblower to the dealer for repairs, and while there a salesman told me there was a good price on new garden/yard tractors. I ended up buying a new Deere 2305 tractor plus a new snowblower, tiller and mower. I also bought a 200CX loader, which is a best buy. I’ve found endless uses for this loader around our yard. I’d be at a loss without it.”
John Deere 2012 825I utility vehicle equipped
1 Best Buy0 Worst Buys“I’m happy with my Deere 2012 825I utility vehicle equipped with a hydraulic dump bed. We use it more than any other tool on our farm.”
John Deere 2032R
1 Best Buy0 Worst Buys“My 2021 Deere 2032R with loader and 60-in. mowing deck has lots of power and torque. It’s easy to get on and off. There’s lots of lifting capacity, and the breakout force of the loader is impressive for this size tractor.”
Jeffrey is dissatisfied with his Timpte hopper bottom trailer. “I’ve owned Timpte trailers for years. I usually trade every other year. The quality has diminished on each one. The last one had paint coming off around all the rivets, bolts were missing, rivets popped, lights failed, and had loose air fittings, all in the first 6 mos. The axles and brakes looked like they were sandblasted. The warranty wouldn’t cover the paint even though it says clearly ‘paint on all metal for 1 year.’”
John Deere 2038R Compact utility tractor
1 Best Buy0 Worst BuysA 2017 Deere 2038R Compact utility tractor with loader and Auto-Connect 60D mower deck is Howard’s “best buy”. “It’s easy and fun to operate. It has plenty of power and many features. It’s also easy on fuel.”
John Deere 210 garden tractor
1 Best Buy0 Worst BuysRichard’s the proud owner of a 1973 Deere 210 garden tractor. “I’ve used this tractor to mow many lawns and also to do thatching work. It has about 3,000 hours on it. I’ve also used it to plow snow for myself and others. It’s a fantastic machine.”
John Deere 2120
1 Best Buy0 Worst BuysHenry Klooster, Tavistock, Ontario: Henry nominates his Deere 255 2-WD tractor as “best buy”. “It’s a handy, fuel efficient tractor with plenty of power, It seems to be holding up just as well as the tractor I traded in - a Deere 2120. We really liked that one, too.”
John Deere 2120 60 hp tractor
1 Best Buy0 Worst BuysMitch bought a Deere 2120 60 hp tractor made in Canada and says it’s his “best buy”. “This tractor was made sometime between 1968 and 1972. I paid $3,500 for it. When I got it, it didn’t look the best because someone had painted it an off-color green and yellow. I gave it a new paint job and new decals, and now it looks great. It runs like a top and has been a really good tractor with no problems. It was well worth the money. I guess not all odd-ball tractors are bad.”
John Deere 213
1 Best Buy0 Worst BuysBrian Parkinson, Milan, IL: “I updated my Deere 213 platform header with cutterbar components - ‘snake heads’ and spring tension hold downs from Crary Co., Fargo, N. Dak. Installation was easy and 40 64 PAPAL CLA IQ ! st Buys page) I've been very happy with the good even cut I’ve been getting in beans. I can go faster and keep going when conditions are tough. It expanded my harvest season.”
John Deere 2150
0 Best Buys1 Worst Buy“My 1984 Deere 2150 was the worst tractor I ever owned. The brakes were designed to run in oil so I never knew when they were worn out. I had to install a new hydraulic pump, a new oil pump, and new brakes, and ended up flushing the entire brake system three times. I also had to buy about $800 worth of hydraulic oil and twenty filters before I got the brakes fixed.”
John Deere 2155 4-WD tractor equipped
1 Best Buy0 Worst BuysMorris Miller, Macon, Miss.: “My Stihl FS 86 brush cutter is powerful and lightweightand comes with many differenttypes of heads for different cutting applications.” John Tibbs Jr., Cohutta, Ga.; “Our best buys are a 1990 Deere 2155 4-WD tractor equipped with a model 175 front-end loader anda Deere 9504-WD tractor also equipped with a Deere loader. We farm and do some landscaping, and we use these tractors like small dozers to spread and level dirt. They also work great in the hay field. “Our Deere 335 round baler, 626 AMT, 316 lawn mower with grass catcher, and 7ft. rotary cutter are also best buys. They’ re outstanding.”
John Deere 2240N
1 Best Buy0 Worst Buys“My 1978 Deere 2240N is a good tractor. However, I think Deere’s new 5000 series tractors are built too light and have too much plastic on them.”
John Deere 225 zero-turn riding mower
1 Best Buy0 Worst Buys“My 2015 Deere 225 zero-turn riding mower always starts right up and is just the right size for our 1 1/2-acre yard. I also use it to mow yards for 2 neighbors.”
John Deere 22A pressure washer
0 Best Buys1 Worst BuyEvan Wank, New Riegel, Ohio: “My International 1440 combine makes ita joy to farm. Once you learn how to adjust it, nothing can touch it.” Evan also likes his Honda TRX 250 4wheeler. “It’s totally trouble-free.” His “worst buy” is a Deere 22A pressure washer. “Something is always going wrong on it.”
John Deere 2305 MFWD utility loader model
1 Best Buy0 Worst Buys“They did their homework when they built this tractor,” says Brian about his 2008 Deere 2305 MFWD utility loader model. “The controls are convenient to use, and the 200 CX loader can be set up in less than 1 min. I use the tractor with a 62-in. mid-mount mower which cuts level, and with a front-mount snowblower that throws snow out up to 50 ft. Even with turf tires, the front-wheel assist keeps the tractor going right through mud and snow.”
John Deere 2355 65 hp tractor
1 Best Buy0 Worst Buys“I use my 1989 Deere 2355 65 hp tractor for raking out levees in rice, drilling seed, and bush hogging. It has more than 4,400 hrs. on it and I’ve replaced only the water pump. It’s also easy on fuel. A great tractor.
“I use my Yanmar 1702D 4-WD diesel tractor in rice fields to spray levees, to drain fields, and to haul out levee gates. I also use it with a 60-in. finish mower to mow our one-acre yard, where it uses only a half gallon of fuel. I also use it with a 60-in. tiller in my garden.”
John Deere 235 GT lawn tractor
1 Best Buy0 Worst Buys“I use my 2001 Deere 235 GT lawn tractor to mow 2 lawns. I also use it with a Cyclone rake to pick up about 4 acres of leaves every year. I use this tractor like a bulldozer, but it still works like new.
“Two years ago I bought a 1/2-in. drive Rockwell cordless driver drill. I haven’t used it often, yet both batteries have failed and now the gear drive is going out. I plan to switch back to Sears Craftsman tools.”
John Deere 240 Weed Eater
1 Best Buy0 Worst BuysJohn Musick, Wellsville, Kan.:; “My 1989 Deere 240 Weed Eater is light and easy to handle and works great. Everyone in my family can operate it.”
John Deere 2440 tractor equipped
1 Best Buy0 Worst Buys“My Deere 855D Gator is handy for hauling wood and doing chores around the farm. It’s powered by a Yanmar diesel engine that starts easy, even in cold weather.
“I also like the 1978 Deere 2440 tractor equipped with a Deere 145 front-end loader that I bought used two years ago. I wouldn’t part with either tractor.”
John Deere 245
1 Best Buy0 Worst BuysJohn P. Voigt, South Haven, Kan.: John's the satisfied owner of a 1987 Ford F-250 diesel pickup. “When I bought it Ford used the same exhaust system on both its gas and diesel models. However, the exhaust system had too much back pressure for the diesel engine so I had a new stainless steel exhaust system and a new air cleaner installed. Now the 6.9-liter engine has about the same horsepower as a 7.3-liter engine. The pickup is built heavy and I likeit. “In August 1991 I purchased a new Deere 2355 MFWD tractor equipped with a Deere 245 loader and no cab, It’s the biggest small tractor I've ever owned, I really like how it shifts. I traded a Ford in on it and am glad that I didn’t buy another Ford. One problem is that most Deere dealers order this tractor with economy hydraulic outlets which I had trouble using. I waited until Deere had one of its half price sales, then bought a set of standard plug-ins. “I recently purchased a Deere 7800 MEFWD tractor equipped with a power quad transmission. like the transmission as well as the tractor’s large cab, comfortable seat, and easy-to-fill fuel tank. I traded in a 1988 Deere 4450 MFWD tractor that had 1,100 hours on it. It rode so hard it hurt my back, and it seemed like it was always in the shop for minor repairs.”
John Deere 2455 MFWD tractor
1 Best Buy0 Worst BuysJohn Heiser, Dayton, Ore.: “My Deere 2455 MFWD tractor is a best buy. “T also like my Deere 2755 MFD tractor, The front wheel drive adds about 10 hp whenever the pulling gets tough.”
John Deere 25 walk-behind lawn mower
1 Best Buy0 Worst Buys“Our Deere 25 walk-behind lawn mower has been nothing but trouble. The ‘flip flop’ handlebar on it that’s supposed to control forward speed is disgusting. The linkage designed to raise the mower broke and the deck plugs up with grass.”
John Deere 2500 tractor equipped
1 Best Buy0 Worst Buys“I own a Deere 2500 tractor equipped with a 200CX front-end loader and a 2011 Deere model 46 backhoe. It’s a good tractor and loader, but the backhoe leaves a lot to be desired. We bought this machine to replace a Deere 2310 reciprocating gear drags the saw back and forth across the log.
“Mine sat in the woods for many years. A few years back I pulled it out, painted it up and mounted it on a 1940 VC Case. It still works fine. A neighbor had an Ottawa saw with a water-cooled engine that could be moved around on two wheels. They sawed a lot of wood with it.”
John Deere 25 1/2-ft 900 field cultivator equipped
1 Best Buy0 Worst Buys“My 1998 Deere 25 1/2-ft. 900 field cultivator equipped with a 3-bar mulcher is a good, reliable piece of equipment. I pull a DMI crumbler behind and it works great, too. The combination makes a good seedbed.”
John Deere 2520 4-WD compact diesel tractor
1 Best Buy0 Worst BuysDonald’s the satisfied owner of a 2008 Deere 2520 4-WD compact diesel tractor equipped with a front-end loader and 62-in. drive-over mower deck. “This tractor and mower combination has reduced my mowing time by half, compared to when I used my old Wheelhorse 16 hp lawn tractor with a 48-in. deck. With the loader and 4-WD this tractor can do a lot more work than you’d expect. And it doesn’t burn much fuel.”
John Deere 2555 MFWD tractor equipped
1 Best Buy0 Worst Buys“My best buy is my Deere 2555 MFWD tractor equipped with a Deere 245 front-end loader. It has about 5,000 hours on it. I’ve replaced the water pump and tachometer but otherwise it has been trouble-free. I use it primarily for loader work but I haven’t had to replace the clutch yet.
“My Deere 1360 rotary mower/conditioner, which I bought used, cuts hay in all conditions, wet or dry, tall or short, and at speeds up to 14 mph.”
On the negative side, Henry says his Deere 1219 sicklebar-type mower-conditioner, which he bought new, caused him “nothing but trouble”. “In heavy hay the reel wouldn’t turn. Instead, hay would wrap around the reel belt causing it to slip no matter how much tension was on the belt. In wet conditions, such as second cut clover, the knife would plug up constantly. I couldn’t go more than 4 1/2 mph in the field and usually spent more time going backward – in order to clear the knives - than going forward. I traded it in for a used Deere 1360 rotary mower-conditioner and it’s a best buy. I’ll never go back to a sicklebar mower again.
“My Breeze windmill is a worst buy. I wanted to use it to aerate my pond to improve the water quality for cattle and fish. Unfortunately, vibration caused the tail section to break off which allowed the blades to hit the mounting pole. The machine was still under warranty so I returned it to the manufacturer. However, instead of replacing the blades all they did was cut the damaged sections from the ends of the blades. This reduced the performance as it required higher wind speeds before it would turn. The bearing on the crankshaft is too light and will only last about four to six months before it has to be replaced. Now the machine has developed an air leak and won’t build pressure. I’ve replaced every bearing and seal on the machine and rebuilt the pump, yet I still can’t seem to get it to work properly. This machine has been nothing but a big waste of money and time.”
John Deere 25EV chain saw
1 Best Buy0 Worst Buys“I like my Deere 25EV chain saw which I bought new in the spring of 1984 and am still using. This saw was made in Japan by Kioritz. I’ve lost count of how many bars and chains I’ve worn out over the years, but this little saw just keeps on running. I use wood to heat my shop so it gets a lot of use.”
A Deere 318 garden tractor rates as his “worst buy”. “The rear output shaft kept breaking while the tractor was still under warranty. Neither the dealer nor the company were very helpful. I think if it would’ve been a $90,000 tractor they’d have been glad to assist, but since it’s just a garden tractor they couldn’t care less. I’ll never buy another green machine.”
John Deere 2623 VT vertical tillage implement
0 Best Buys1 Worst Buy“My 2018 Lindsay VRI 8500 center pivot irrigation system is equipped with a 9500 corner arm unit that’s very uniform (www.zimmatic.com; ph 866 404-5049). The entire irrigation system provides water amounts variably wherever I want.
“My 2014 Deere 2623 VT vertical tillage implement is my worst buy. The rear blades were a disaster but I got no company support. I also had problems with the gang bearings. I finally traded it for a Case 335 VT, which works good.”
John Deere 2630 tractor
1 Best Buy0 Worst BuysMike nominates his 1974 Deere 2630 tractor as his “best buy”. “My father bought this tractor new and it’s still an important part of our farming operation. It has a lot of power for its size and weight and is easy to operate.
“The only locking pliers I’ll buy is the Vise-Grip brand (www.globalindustrial.com; ph 888 978-7759). I’ve tried using several other off-brand locking pliers without success. Either the threads strip out of the adjuster screw or they unlock too easily. If it isn’t Vise-Grip, forget it.”
John Deere 265 and 325 lawn mowers
1 Best Buy0 Worst Buys“My 2021 Milwaukee M18 18-in. battery-powered chainsaw cuts well. The battery is good for hours of use. I use it for trimming tree branches or cutting down 2 to 3-in. trees. It’s a little heavy but is a great tool.
“My 2018 Buick Century 4-cyl. 4-door hatchback sedan is a great car. The hatchback is very useful, especially with a backseat that folds down. It handles well with incredible acceleration and gets 30 mpg. It’s roomy enough for four people.
“I own two Deere lawn mowers (265 and 325) that were purchased used. Both are great mowers. I’ve had no trouble, and they’ve only needed routine maintenance over 10 years of use.”
John Deere 2680H high-speed disk
1 Best Buy0 Worst Buys“We love the convenience of our cordless Milwaukee impact wrenches. They’re powerful and reliable.
“We bought our Deere 2680H high-speed disk in 2020. We chose Deere specifically because we thought Deere would stand behind their product. It had so many problems that I would consider it an unusable implement. Major bushings had to be replaced each season, bearings in rollers ($600 each) went out the first season, rollers ball up with wet dirt (it only works well when very dry), cylinders leaked the first year, and disk hangers move on the bar. There were several other problems as well. Our local dealer helped us out, but Deere wouldn’t do anything.”
John Deere 272 rear deck mower
1 Best Buy0 Worst Buys“I recently bought a Deere 272 rear deck mower equipped with solid rubber rear caster wheels, the edge of which had a sharp angle. The problem was that whenever the caster wheels oscillated they dug up the grass. I previously owned a Deere 270 rear deck mower equipped with pneumatic, smooth tread tires that had a generous radius at the edge, and it didn’t have this problem. I finally convinced the company and my local dealer to replace the rigid, square-edged tires with the pneumatic, smooth tread ones. That solved the problem.
“I bought a hot water pressure washer from Northern Hydraulics. At times, it delivered hot water but at other times it didn’t. After I made multiple calls to the company they told me that a defect in the computer chip was causing the erratic performance. They replaced the old chip with a new one, and now the machine works great.”
John Deere 275 disc mower
0 Best Buys1 Worst Buy“The engines on my IH 303 and 615 combines seem to run forever, and are simple enough in design that I can work on them by myself. I bought both combines used years ago and they’re still going strong.
“In my experience, Deere 3020 and 4020 series tractors equipped with the powershift transmission will run forever without any problems.
“Several years ago I bought a new Deere 275 9-ft. disc mower which turned out to be a piece of junk. It was welded together at the factory with the belt pulleys out of line, and as a result I had to replace several sets of $300 belts. I had a welding shop cut 1/2 in. out of the frame, which cured most of the problem. Also, the mower’s swivel shaft broke off, and I’ve had to replace several gears and bearings. I’ve spent more money on repairs than what I paid for the machine.”
John Deere 2800 variable width plow
1 Best Buy0 Worst BuysLuke R. Thelen, Fowler, Mich.: Luke's happy with his Deere 2800 variable width plow. “Lets me adjust plowing width onthe-go hydraulically from the cab. “My Polaris 350 cc liquid-cooled 4-WD ATV is handy and a good buy.” On the “worst buy” side, Luke lists his Mohawk rotary brush cutter. “It continually sheared bolts on uneven ground. Finally I installed a slip clutch pto.”
John Deere 2940 4-WD loader tractor
1 Best Buy0 Worst Buys“It’s a nice, small tractor for doing light yard chores but also has a lot of power,” says Eugene about his 2005 Deere 4120 compact 4-WD loader tractor. “I use it to mow hay with my MoCo 926 discbine and to handle big round bales, with no problems. It has about 2,300 hrs. on it.
“The Deere 2940 4-WD loader tractor I bought used developed internal hydraulic leaks soon after I bought it. It was in the shop several times but never got totally fixed. I paid $16,500 for it and spent $7,000 to $8,000 on repairs. I sold the tractor a few months later for $13,500 and was glad to see it go.”
John Deere 2940 MFWD tractor equipped
1 Best Buy0 Worst Buys“My best buy is my Deere 2940 MFWD tractor equipped with a 260 front-end loader. It’s been used hard for 10 years and nearly 7,000 hours on our hog operation where we’ve used it to grind over 3,000 tons of feed each year. It’s equipped with an M & W Gear turbocharger and the fuel pump is set 25% over. As a reward for the tractor’s trouble-free service we bought new seat cushions for it and turned up the fuel an additional 10%.”
John Deere 2950 FWA
0 Best Buys1 Worst Buy“Our L3800 Kubota FWA with loader is a great extra set of hands around our farm. I made a bolt-in fork that we use to move brush, carry poles, dig ground, haul manure, carry hog panels, and so on. When needed, I place a plywood platform over the forks to carry bulk items and use as a scaffold platform when working on buildings. I particularly like the loader’s hydraulic lock-out feature.”
On the negative side, “My Deere 2950 FWA with cab has a good engine but is an unreliable tractor. The clutch slave cylinder is a continuous problem, as is the mechanical fuel pump. Poor cold weather starting and the cab is cramped.”
John Deere 2955 4-WD tractor
1 Best Buy0 Worst Buys“My 1992 Deere 2955 4-WD tractor is my best buy. I bought it used two years ago with just over 1,500 hours on it and have put about 800 hours on it with few problems. This tractor is put together very well.
“My 2004 Cub Cadet 7254 compact tractor is the worst piece of equipment I’ve ever owned. It’s equipped with a 60-in. belly mower and loader. At 100 hours the belt wouldn’t stay on the mower, and the company wouldn’t do anything to solve the problem. The steering box was cracked when it came from the factory, which caused hydraulic problems. The pto clutch went out at 250 hours, and soon after that the cooling fan flew apart. I sold this tractor at 300 hours and have never looked back.”
John Deere 2-WD 8100 tractor
1 Best Buy0 Worst BuysPeter’s well pleased with his 1997 Deere 2-WD 8100 tractor. “It has plenty of power and is easy on fuel. The Comfort Cab is real quiet and easy to get in and out of, and the air ride seat is exceptionally comfortable. My only complaint is that shifting between 12th and 13th gears is not as smooth as I feel it should be. However, I understand the dealer can fix that.
“I bought front wheel fenders from an after-market dealer and they work well in keeping gravel from hitting the windshield” (M.D. Products, 1998 215th St., Humboldt, Iowa 50548; ph 515 332-3550).
“I also used copper tubing to move two grease fittings to the side of the front axle pivot. This makes it a lot easier to grease than having to get under the tractor to service them.”
John Deere 2-WD Gator
1 Best Buy0 Worst BuysA 1998 Deere 2-WD Gator rates as Dave’s “best buy”. “We use this utility vehicle on our small produce farm to carry tools, fertilizer, seed, and to help during harvest. It’s equipped with a full Curtis cab (www.curtisindustries.net; ph 508 853-2200) as well as a windshield wiper and heater, and I also added a roof-mounted tractor radio. The 10 hp. Kawasaki engine has a lot of power and is fuel efficient.”
A problem developed after he installed his ShelterLogic 10 by 20-ft. canopy building. “The canopy came packaged in a box, and was folded so tightly that after about one year many pin holes developed at the folds.
“The draft pins on my KingKutter 3-pt. mounted disk are mounted so close to the frame that I can’t use a quick hitch to hook up the disk.”
John Deere 3 800 psi
0 Best Buys1 Worst BuyDonald’s impressed with his 2008 Honda Foreman 500 4-WD ATV. “It has power steering which I really like. It steers so well that driving it is like riding on water. It also has a lot of power.”
He’s disappointed with the Deere 3,800 psi pressure washer he bought at Lowes. “I hadn’t burned even one tank of gas with it before it lost pressure and quit pumping air. I took it back to Lowes and they said they’d have to send it back. However, I thought they should give me a new one as it wasn’t my fault the machine didn’t work. I had to make two 20-mile round trips, and now I have to do without a pressure washer for who knows how long.”
John Deere 3005 4-WD compact utility tractor
1 Best Buy0 Worst Buys“My 2013 Stihl MS250 is a great chainsaw. This is my third Stihl saw in 25 years, and I still use all of them.
“My Wilton wood maul weighs only 6 lbs. and has a nice 36-in. long handle. It feels good when I use it (ph 800 274-6848; www.wiltontools.com).”
He’s had a problem with his 2010 Deere 3005 4-WD compact utility tractor equipped with a Yanmar 3-cyl. diesel engine and 8-speed transmission. “The tractor came with a 3-year or 2,000-hr. warranty. It had 150 hrs. on it when I noticed something was wrong, 3 days after the warranty had expired.
“The tractor starts good and runs for about 45 min. but then shuts down. If I let it sit for about 2 min. I can then run it for another 45 min., but then it shuts down again. Now it runs for only about 10 min. before it shuts down. It has about 300 hrs. on it.
“The company told me I was ‘3 days late and a dollar short’ in terms of the warranty. They said if I brought the tractor in they’d look it over, at $79 per hour. In an effort to solve the problem I’ve already replaced 2 fuel filters, a timer behind the dash, and a fuel solenoid in the injector pump. I also checked to see if there was a special fuse but couldn’t find one.
“Otherwise, this seems to be a good tractor. Can anyone help?”
John Deere 300-R tractor
0 Best Buys1 Worst Buy“It’s one of the best lawn tractors I’ve ever owned,” reports Daniel, impressed with his 2008 Husqvarna 26 hp riding mower equipped with a 46-in. deck. “It’s powered by a Briggs & Stratton engine that’s easy on fuel, and the hydrostatic transmission is smooth.
“My 2007 Deere 300-R tractor is my worst buy. It went back to the dealer three times for belt and pulley problems, and the last time the tractor was just about to catch on fire when I stopped and checked the belts. A pulley had broken so back it went to the dealer again.”
John Deere 301
1 Best Buy0 Worst Buys“My Deere 301 and 301A industrial tractors are both best buys. These tractors are gas-powered and always start right up. With power steering and hydraulic brakes, they drive like high-powered go-carts. They both have loaders on them and I’ve adapted several attachments to the loaders including a digger for small trees, a forklift, and a grapple bucket. My next project is to adapt a hydraulic-powered brush chopper so I can mow without having to twist around and look back all the time. On the down side, I never thought a 3-cyl. engine could burn so much fuel.”
John Deere 3010 37
1 Best Buy0 Worst Buys“I sold my 1961 Deere 3010 37 years ago and bought it back in 2019. It’s still going strong with over 22,200 hrs.”
John Deere 301A tractor
1 Best Buy0 Worst Buys“I like the 1985 Deere 301A tractor that I bought used at an estate sale for $3,000. It’s equipped with a box blade and a front-mounted, 7-ft. wide bucket as well as a 2-prong round bale hauler that can pick up two 6-ft. bales at a time.
My 2006 Sears Kenmore 370 water softener is my worst buy. The electronic board goes out about every three months, and it takes two weeks to get a service man out to look at it. It takes seven more days to get the elecronic board, and then another two weeks for the serviceman to come out again to install it.”
John Deere 302
1 Best Buy0 Worst Buys“It’s small, friendly to drive and very reliable for a 50-year-old tractor,” says Trent about his 1964 Deere 302. “The powershift transmission on it works better than the transmission on our newer Deere 4455.”
John Deere 3020 2-WD tractor
1 Best Buy0 Worst BuysDavid’s satisfied with his 1965 Deere 3020 2-WD tractor. “I use it with a dump box to haul sand. It’ll go uphill with a full load, no problem. It also pulls our 18-ft. New Holland haybine.”
John Deere 3020 LP gas tractors
1 Best Buy0 Worst Buys“I like foam marker kits made for small sprayers by Paul B Parts (www.paulbparts.com). I’ve used their 5-gal. tank foam marker kit for two years and it works great. These foam markers aren’t as expensive as others on the market. You do have to build a frame to install them, but it’s not difficult.
“I’m happy with Deere 3020 LP gas tractors. I’ve farmed for 48 years using only LP gas, with no problems.”
John Deere 3025 loader tractor
1 Best Buy0 Worst Buys“My Deere 3025 loader tractor works great to do digging and lifting jobs. No problems.”
John Deere 3025D
1 Best Buy0 Worst Buys“I purchased a new Deere 3025D and a 5-ft. Frontier mower in Oct. 2021. It’s a wonderful little tractor. It doesn’t work hard, just mowing 6 acres of Texas pasture. It’s used much more for odd jobs like spreading gravel, lifting motors and a portable workbench when used with forks and a modified pallet. It’ll lift a Dodge Cummins 6 cyl. but that’s about all it can handle.”
John Deere 3025E 4-WD loader tractor equipped
1 Best Buy0 Worst BuysA Deere 3025E 4-WD loader tractor equipped with a hydrostatic transmission rates as Michael’s “best buy”. “It has a lot of power and traction, and the hydrostatic transmission is easy to operate. The loader has plenty of lifting power and the controls for it are easy to operate. The 3-pt. controls are also easy to operate.
“My Deere 3-pt. mounted, 55-in. rototiller leaves a smooth, level seedbed.”
John Deere 3038E 4-WD loader tractor equipped
1 Best Buy0 Worst Buys“I bought a used Deere 3038E 4-WD loader tractor equipped with a hydrostatic transmission with less than 20 hrs. on it. No problems so far. A 3-pt. quick hitch that I installed on the tractor makes it easy to switch implements, which is important to me as I’m 79 years old. I like being able to remove and install the loader right from the tractor seat. This tractor replaced a Yanmar diesel that I had used for more than 30 years with no problems.”
John Deere 304X riding mower
1 Best Buy0 Worst Buys“Our 2013 Deere 304X riding mower has all-wheel steering which greatly reduces our mowing time. All we do is put in gas and go. No breakdowns.
“Our 2013 Polaris Ranger 800 EPS utility vehicle is a handy machine. It always starts and runs great. It’s easy to get in and out of, and the electronic power steering is really nice in tight spots.
“The 2004 Bobcat T190 tracked skid loader we bought used in 2013 appears to be bulletproof. We bought a CID Attachments rotary brush mower for it that cuts through brush like you can’t believe (www.cidattachments.com; ph 336 859-2002). It’ll even cut down small trees. I’d recommend this mower to anyone.
“Our 2006 Cub Cadet LT1050 lawn tractor was a piece of junk from the start and I spent more time working on it than mowing. The blade spindles were always failing, and the wire on the electric-operated pto ripped off. Also, the tires were made of rubber so thin that holes developed in them. The only good thing was the Kohler engine.”
John Deere 30-ft
1 Best Buy0 Worst BuysMelvin Simpson, Santanta, Kan.: A 1989 Deere 30-ft. disc and a 1990 7130 Case IH 4-WD tractor are two of Melvin's best buys. “We haven't had to replace a single gang bearing on the disc. The tractor is easy on fuel, is easy to drive and has good visibility, We've only had two minor problems with the tractor in the 4,000 hours we've worked it and both problems were quickly taken care of by our dealer.”
John Deere 310SE backhoe
1 Best Buy0 Worst Buys“My 1999 Deere 310SE backhoe does everything I want it to. No major problems.”
John Deere 310SG backhoe
1 Best Buy0 Worst Buys“The only problem I’ve had with my 2005 Deere 310SG backhoe is when an electronic valve went out. Otherwise, this machine runs great and does everything I ask it to.
“My 2004 New Holland TN655 4-WD tractor had many problems during the first two years. The dealer had to replace two sets of wiring harness, as well as a starter, battery, and hydraulic pump. The tractor sat in the shop for about six months. Two weeks after the warranty expired I had to replace a throw-out bearing, and then a solenoid, starter, and battery as well as two cables to hydraulic valves. Also, almost every electronic switch has gone out.”
John Deere 3120 C Hydro tractor equipped
1 Best Buy0 Worst BuysEdwin nominates his 2006 Deere 3120 C Hydro tractor equipped with a 300X front-end loader and 375 backhoe as his “best buy”. “We use this tractor to move dirt and snow, and to plant trees.”
John Deere 3140 tractor
1 Best Buy0 Worst Buys“My 1997 GM 1/2-ton pickup is easy on fuel and performs well.
“Five years ago I bought a used Deere 3140 tractor. I’ve gone over the hydraulic system from front to back but can’t get it to work properly.”
John Deere 3155 tractor
1 Best Buy0 Worst BuysPaul H. Rissler, New Enterprise, Penn.: Paul’s had good luck with his 1988 Deere 3155 tractor, “Ithas 115 hp but is still very fuel efficient. The gear shift levers are conveniently located and the engine has lots of torque. One problem was that the pto clutch went out before 50 hours but it was covered by the warranty. I have 800 hours on it now. “My 1989 Gehl 170 Mixall grinder mixer makes better ground ear corn than any other roller mill I’ve ever seen.”
John Deere 3155 4-WD tractor
1 Best Buy0 Worst BuysJohn deBoer, Mt. Elgin, Ontario: “My Deere 3155 4-WD tractor is rated at 95 hp but pulls like ithas 120 hp, It has a quiet and comfortable cab and is a pleasure to drive.”
John Deere 317 garden tractor
0 Best Buys1 Worst Buy“I like my Greasemaster electric grease pump. I bought it about five years ago from an industrial salvage dealer. It’s one of the finest tools I’ve come across in a long time. It consists of a 5-gal. pail of grease with an electric motor mounted on top of the cover plate. The motor drives a shaft that goes down inside the bucket and is connected to a small can and pump, which pumps the grease out.
“I carry it in the back of my pickup and power it off the truck’s 12-volt battery. The original model was designed to operate on six volts. It pumped too fast and drew too much current. I converted it to run on 12 volts by modifying the motor’s field coils. I do heavy equipment excavating so I have to pump a lot of grease. I had been pumping grease by hand, which about wore me out. The Greasemaster is a lot more convenient than an air-operated pump because you don’t need to haul an air compressor around to run it.
“The only thing I know about the manufacturer is that the words ‘G and T Industries, Inc., Wichita, Kansas’ are inscribed on the tool. (Editor’s Note: We
“I’m not happy with my Deere 317 garden tractor. “I bought it used a few years ago and it’s now on its third Kohler 17 hp engine. The company should never have allowed such a power plant to be used in its products.”
John Deere 320 lawn tractor
1 Best Buy0 Worst Buys“My 1992 Deere 320 lawn tractor has 1,500 hours on it. My only cost so far is for belts and a couple of pulleys.”
John Deere 320G skid loader
1 Best Buy0 Worst Buys“My 2019 Deere 320G skid loader has a longer reach than the 2006 Deere 320 we previously owned. It also has a back-up camera, which I really like.”
John Deere 3220 32 hp tractor
1 Best Buy0 Worst Buys“My Deere 3220 32 hp. tractor has plenty of power to operate my 5-ft. Land Pride rotary cutter and my 6-ft. finish mower. It also has a nice road speed.”
John Deere 323D skid loader equipped
1 Best Buy0 Worst Buys“I bought a Deere 323D skid loader equipped with tracks for $44,000 from ERB Equipment in Evansville, Ind. Just 2 years and 15 days later the glass door exploded into thousands of small pieces, cutting my face, neck and hands. I was surprised that OSHA would allow a company to use this kind of glass, and even more surprised that neither the dealer nor the company would do anything about it. It cost me $2,040 to have a quality glass door made that won’t explode. Goodbye, John Deere.”
John Deere 324 riding mower equipped
1 Best Buy0 Worst BuysJoe’s happy with his 2010 Deere 324 riding mower equipped with 4-wheel steering and a 48-in. deck. “It always starts right up, runs well, and has a lot of power. Also, the controls are easy to use.”
John Deere 3255 100 hp tractor
1 Best Buy0 Worst BuysGeorge A. Hunt, Orange, Mass.: George says his 1993 Deere 3255 100 hp tractor, equipped witha Sound Gard cab, is his “best buy”, “It’s the first tractor we've ever had that was equipped with a heater, defroster, air conditioner, and stereo radio. We use it for plowing, harrowing, spreading manure, and chopping haylage and corm silage.”
John Deere 3255 MFWD tractor
1 Best Buy0 Worst Buys“I liked my 1998 Chevrolet 3/4-ton extended cab pickup equipped with a 454 cu. in. engine and automatic transmission. It was the ideal pickup and did everything I expected it to. It was economical, comfortable, and trouble-free. When it had 42,000 miles on it, I traded for a 1999 Chevrolet Silverado Z-71 longbed pickup. Mechanically it’s a good pickup. The engine has excellent snap and it performs well when empty. However, it can’t handle towing or hauling because of the soft suspension. If you haul more than 500 lbs., it sags badly. The seat is another problem. I’ve driven Chevrolet trucks since 1948 and this model has the sorriest driver’s seat of them all - and it’s supposed to be the company’s best seat.
“My 1993 Deere 3255 MFWD tractor is a best buy. It has more than 2,500 hours on it with no problems at all. It has terrific pulling ability for a 100 hp tractor.”
John Deere 3300
0 Best Buys1 Worst Buy“My best buy is our family’s Oliver Model 35 combine with a 10 ft. cut, which was purchased new in 1955. Everything that moved had a grease fitting.
“My father did custom cutting to help pay for the combine. We never replaced a bearing in this combine. It took two men or one man and a boy (me) about an hour to grease the machine. It never went to work until it was serviced. I don’t know how many acres of oats and wheat it cut over its lifespan. I took over the farm in 1970 and ran the combine until the 1989 season was over.
“I replaced the Oliver with a Deere 3300 with a 10 ft. cut purchased from an estate sale with 1,987 hrs. on the clock. This is the worst-engineered piece of equipment I’ve ever owned. Who puts the exhaust pipe 2 in. from the top radiator hose? No wonder it gets soft and fails. Or, why put the air intake right above and behind the header, where it can suck up all the chaff and clog? Also, the machine has very few grease fittings. Most of the non-greaseable bearings have failed and been replaced.”
John Deere 3320 tractor equipped
1 Best Buy0 Worst Buys“In October of 2005 I bought a new Deere 3320 tractor equipped with a 300 CX front-end loader. The tractor now has 56 hours on it but I’ve only been able to use the loader itself for about four hours. The pins and bushings on the loader were loose. The amount of slop in the pins was what you’d expect to find in an old, wornout loader that had been abused and not greased regularly.
“In my opinion, the craftsmanship on this loader is of inferior quality. The dealer that I bought it from sent someone out to tell me that everything is within company guidelines. I’ve waited all my life to own a new Deere tractor, and now all I’ve got is something made with inferior parts made in China. I always thought Deere was like mom and apple pie. Everyone thinks their tractors are 100 percent American made. Deere should advertise the truth that their 300 CX loader is assembled in Canada with parts imported from China. I wonder where the tractor itself was made, and where the parts on it came from?”
John Deere 3320 35 hp loader tractor
1 Best Buy0 Worst Buys“My Deere 3320 35 hp. loader tractor runs great and has a lot of power for its size. I use it with a winch for skidding logs and pulpwood.”
John Deere 346 small square baler
1 Best Buy0 Worst Buys“I recently purchased a used 1979 Deere 346 small square baler through an ad in a local magazine. After making minor adjustments, I used it last summer to make about 1,200 bales. Only one bale broke and that happened when I started a new box of wire. I wouldn’t be afraid to put this machine in the field against a brand new unit.”
John Deere 350
0 Best Buys1 Worst BuyGreg Geiger, Morton, Ill.: “It's hard to fill this grain drill if you don’t have an auger system,” says Greg, who's otherwise pleased with his 1994 Deere 750 no-till grain drill, “It has great depth control at all speeds and produces excellent stands. “My 1994 White 6100 planter spaces seed accurately and also produces excellent stands. However, the transmission is somewhat clumsy to use and the hopper lids leak insecticide whenever the planter is folded vertically. “My worst buy is my Deere 350 mower. The cutter bar is difficult to raise into transport position - it should be powered by a separate hydraulic system. Also, it’s difficult to hook up the quick hitch to the drawbar lift mechanism.”
John Deere 354 riding mower
1 Best Buy0 Worst BuysHe’s pleased with his Bosski ATV trailer. “It has dual axle high flotation tires, an electric dump cylinder, electric brakes, torsion bar suspension, and rear brake lights. It’s been in constant use on my farm for the last 6 years and has far exceeded my expectations.”
John’s also happy with his Deere 354 riding mower. “It mows over 2 acres. The 4-wheel steering maneuvers around obstacles with ease. Comfortable ride, good cut, and it’s economical on gas. Great mower.”
On the negative side, “I used to love WD-40, but lately the cans run out of propellant when they’re still 1/3 full. Makes you feel cheated.”
John Deere 35D compact excavator
1 Best Buy0 Worst BuysJohn is pleased with his Montana T-Rex 350E post driver (www.montanapostdriver.com; ph 800-330-1937). “We mounted it on our used Deere 35D compact excavator (also a best buy) for ranch fence work.
“My worst buy is my Klein Tools ET450 Advanced Circuit Breaker Finder. It wouldn’t come on and never did.”
John Deere 360 diesel-powered skid loader
1 Best Buy0 Worst Buys“It’s a great all-around machine No problems,” says Glen about his 2000 Deere 360 diesel-powered skid loader. “I use it to run a portable auger, to trench foundations, set trusses, unload material with forks, grade fill for building sites and to do finish grading with a blade. I had heavy-duty Loegering tracks put on it right after I bought it, and tire wear with the tracks has been minimal. I’ve only had to replace the tires once.
“I’ve owned New Holland, Bobcat and International equipment previously and had problems with all of them. When I buy new construction equipment now it’s always Deere.”
John Deere 3835
1 Best Buy0 Worst BuysMark Stupfel, St. Paul, Ore.: Mark's pleased with the Deere 3835 3-bottom switch plow he bought new in 1993, “It does a good job of covering crop residue in ground that’s been disked first. It seems to break up the soil more than a moldboard plow. In tough plowing conditions I can change the bottoms from a wide cut down to a 14-in. wide cut. Also, the plow’s so light my small tractor can lift it.”
John Deere 3960 forage harvester
1 Best Buy0 Worst Buys“We traded a New Holland 1890 self-propelled forage harvester and a Deere 3960 forage harvester in for a 1996 Gehl 1065 pull-type harvester. Both of the old machines did a good job, but we had some expensive experiences with foreign metal objects and wanted a machine equipped with a metal detector. “We use a Deere 4630 tractor to pull the harvester and it performs quite well. We’re glad that we have the metal detector. Last year while we were harvesting silage the metal detector went off 33 different times on 26 rows of corn that bordered a fence around our property. It turned out that a month before we went into the field our neighbor had a young fellow replace the electric fence wire. He threw lengths of old wire helter-skelter into our standing corn. Without the metal detector we’d never have known about the wire.” On the negative side, he lists parts-ordering through the AGCO company. “My dealer tries his best to provide good service, but ordering parts through the AGCO system can be a real nightmare. I once ordered an oil seal for a manure spreader but instead received a shear bar designed for a loader bucket. It turned out that both items had the same part number. Recently I needed to rebuild an axle assembly for my White field cultivator. After three deliveries of parts that didn’t fit, I disassembled another axle and found the matching parts at a Deere dealership.”
John Deere 4005 39 hp diesel model
0 Best Buys1 Worst Buy“It rides and handles great,” says David about his Ford F-350 longbed pickup equipped with a 6.2-liter gas engine. “Everyone told me to buy a diesel model, but I don’t pull real heavy loads too often so I figured the extra $9,000 wasn’t worth it. I was right. This pickup will pull a trailer loaded with my 10,000-lb. Ford 6610 tractor with ease. It averages 16 mpg.”
On the negative side, “I traded my Ford New Holland 3415 tractor in for a Deere 4005 39 hp diesel model. The New Holland tractor was rated at 38 hp but ran circles around the Deere. I had trouble with the Deere tractor’s hydraulics and fuel injector so I traded it for a New Holland Boomer 45, which I really like.”
John Deere 4005 41 hp loader tractor
1 Best Buy0 Worst Buys“Our 2015 Deere 4005 41 hp. loader tractor runs great and is perfect for our family farm. We use the loader bucket almost like a wheelbarrow to move soil, small square bales, and so forth. We also use it with a post hole auger to install fence posts and to plant trees, and with a grader box to level our yard and driveway. We love this tractor.”
John Deere 4020s
1 Best Buy0 Worst Buys“We have a couple of Deere 4020s that we use on the farm almost every day. With routine maintenance, they seem to just keep running.
“I wouldn’t recommend a Cleary building. My dad bought a 60 by 135-ft. pole building. When the building was put up, the builder forgot to put the ridge and gable vents in, so they came back later to cut them in. All the vents leaked water in. The builder would do nothing to fix the problems, so we got ahold of Cleary. They gave us the runaround until the warranty was up. Terrible customer service.”
John Deere 4024TF 270 diesel engine
0 Best Buys1 Worst Buy“I use my 2003 New Holland LS170 skid loader every day and it now has about 12,000 hrs. on it. I’ve replaced the starter and alternator and rebuilt the hydrostatic pump, but otherwise it has been trouble-free.
“I’ve had problems with my Deere 4024TF 270 diesel engine. At only about 400 hrs., we had to take the engine back to the dealer for repairs not covered by the warranty. They installed a new rack, adjusted pumps and the governor, changed the oil, filters and glow plugs – and then charged me $3,075.31. What’s more, the engine ran even worse and smoked when I got it back. At about 1,000 hrs., we had to redo the head and then totally rebuild the engine.”
John Deere 4040 MFWD tractor equipped
1 Best Buy0 Worst Buys“My 1978 Deere 4040 MFWD tractor equipped with a model 158 front-end loader and grapple fork is my best buy. The loader has been on the tractor ever since I bought it. I’ve used this tractor continuously for ranch work, putting up hay during the summer, and feeding hay during the winter. The engine and front axle parts both were overhauled once. The powershift transmission never wore out but the shifter lever did. The tractor now has 15,000 to 20,000 operating hours, much of them at reduced rpm’s.”
John Deere 4040S front wheel assist
1 Best Buy0 Worst Buys“I like my 1982 Deere 4040S front wheel assist tractor equipped with a Buhler front-end loader. It starts right up, is easy on fuel, and has a flip-out rear window that makes it easy to see to hook up. Drives and handles great.”
John Deere 4050 4-WD tractor
0 Best Buys1 Worst BuyWayne’s had problems with his 2015 Deere 4050 4-WD tractor. “The engine has a lot of pollution control equipment on it, and as a result just a few drops of water can cause it to lose power and, in some cases, shut down in the field. My daughter was driving the tractor one time when it shut down. They found sludge in the fuel tank, which I think was already there when I bought the tractor. Also, when too many particulates enter the muffler I have to stop and run the tractor at a certain speed until the muffler cleans itself out.
“I previously owned a Deere 2955 and it ran good, but I wanted a tractor with a cab so I traded it. I’ve owned a lot of good Deere tractors in the past including a B, two A’s, and a 2-cyl. diesel. My dealer tried to help but had no luck.”
John Deere 4075R
1 Best Buy0 Worst Buys“My Kubota RTV is quiet, and the cab has A/C and heat.
“My Deere 4075R is a nice upgrade from a 3046R. It has more power and a smoother ride.”
John Deere 40C crawler tractor
1 Best Buy0 Worst Buys“I like my mid 1950’s Deere 40C crawler tractor which I bought used about 15 years ago. It has required only routine maintenance and always starts and works great.
“My Stihl 028 Super chainsaw is a best buy. All I’ve replaced are the bars and chains. It’s a dependable saw.
“My Dremel contour sander is my worst buy. I wasn’t able to even finish sanding one chair that we were refinishing. Now all I have is a plastic box and a bunch of new sanding pads.”
John Deere 4100 4-WD 19 hp
1 Best Buy0 Worst BuysJim likes the 1998 Deere 4100 4-WD, 19 hp. HST tractor he bought used. “It’s a great little workhorse. I wish I would have bought it new back in 1998.”
John Deere 410R sprayer
1 Best Buy0 Worst BuysDavid is the satisfied owner of a Deere 410R sprayer. “This is an excellent sprayer. It’s our fourth Deere sprayer with a 120-ft. boom. It has a heavier and stronger boom and a better mixing tank.”
John Deere 4200 4-WD compact tractor
1 Best Buy0 Worst Buys“My Deere 4200 4-WD compact tractor is fuel efficient and a real workhorse. It’s also easy to get on and off. I have leg problems and needed a tractor with a flat deck transmission, which makes the tractor easy to mount. I use a make-shift hand control to operate the hydrostatic transmission. The tractor also has cruise control, power steering, and an adjustable seat and steering wheel. It starts easy in cold weather.”
John Deere 4210 utility tractor
1 Best Buy0 Worst Buys“My Deere 4210 utility tractor with a 420 loader is like my right-hand man. It’s extremely handy. I added forks to the loader, and I use it for everything around my property. I’ve had very few issues with it.”
John Deere 4250 MFWD tractor equipped
1 Best Buy0 Worst BuysPhilip likes his 1995 Westfield 10-in. dia., 61-ft. long grain auger equipped with a swing-out hopper. “It’s easy to set up and load semi trucks. It’s raised and lowered by hydraulics which saves a lot of cranking. We put at least 100,000 bu. through it every year and haven’t had to repair anything.
“Our 1988 Deere 4250 MFWD tractor equipped with a power shift transmission is also a best buy. We bought it used in 1994 with more than 2,200 hours on it. It now has about 6,700 hours on it with virtually no major repairs - just routine maintenance. It doesn’t use any oil and is one of the most dependable tractors we own.”
John Deere 4300 32 hp 4-wd tractor
1 Best Buy0 Worst BuysHe’s the owner of a 2002 Deere 4300 32 hp. 4-WD tractor equipped with a hydrostat transmission and a 485 backhoe. “We’re very impressed with it. The previous owner put it in a pond with a load of stone in the loader bucket. Insurance totaled it. A local dealer rebuilt the tractor and we bought it. We use it with a 60-in. rototiller to put in food plots and loader forks to cut firewood. It’s an awesome machine.”
John Deere 4300 4-WD tractor equipped
1 Best Buy0 Worst Buys“My Deere 4300 4-WD tractor equipped with a diesel engine and hydrostatic transmission works great. I use it to move railroad ties and logs as well as to bush hog and move snow. There was a problem with both loader lift cylinders, but the dealer promptly replaced them.”
John Deere 4310 4-WD tractor equipped
1 Best Buy0 Worst Buys“I like my 2003 Deere 4310 4-WD tractor equipped with a 32 hp diesel engine, 12 by 12 power shuttle transmission, and a Deere 430 frontend loader. I use it with a 60-in. mowing deck which I hook up to the tractor’s I-Match 3-pt. hitch. The combination of the 32 hp engine and 12 by 12 transmission puts a lot of power to the ground and makes the tractor feel more like a 60 hp model. This tractor has more hydraulic lift and performance than any other tractor brand in its class. The loader comes off in only three minutes, and with the I-Match 3-pt. hitch, I can remove the rear attachments in only one minute and start mowing.”
John Deere 4400 4-WD tractor equipped
0 Best Buys1 Worst Buy“My Deere 4400 4-WD tractor equipped with a front-end loader is my worst buy. The hydraulic pump went out every 80 to 90 hours when we first got it. Two weeks after the warranty expired the pump went out again. The tractor had only 326 hours on it.
“My New Holland TW 65A is the best small tractor I’ve ever owned.
“My 1998 Yamaha 600 Grizzly ATV is a best buy. I use it to pull trailers and for fence work, etc. No problems.”
John Deere 4420 combine
1 Best Buy0 Worst BuysGaylord Poffenbaugh, Lucas, Ohio: Gaylord’s “best buy” is his 1981 Deere 4420 combine. “It’s extremely dependable, has good capacity and fuel economy, is very maneuverable, and goes right through wet fields.”
John Deere 4435 combine
1 Best Buy0 Worst Buys“Our 1998 Deere 6 by 4 Gator is our best buy. We’ve spent only about $300 on repairs.
“The Sears 300-amp electric welder we bought in 1957 still works fine. No problems.
“Our Sears 80-amp battery charger is more than 25 years old, and the only repair it ever needed was to a fan motor. This battery charger still works great.”
On the minus side, “Everything that could go wrong, did go wrong on my Deere 4435 combine. The wheels came off, the elevator housing wore out, and the straw chopper blades came out and cut a hole into the sheet metal on back of the combine. The front wheel housing doesn’t line up with the transmission shaft, and electric switches controlling the hydraulics don’t work. This machine was made in Germany so some of the bolts are metric and some aren’t. As a result you need two sets of wrenches to work on this machine.”
John Deere 444 J articulating wheel loader
0 Best Buys1 Worst BuyPeterson bought a unit from Eagle Research but saw no improvement in mileage. He requested a refund and received a check.
“My 2007 Deere 444 J articulating wheel loader is my worst buy. We bought it after another loader burned up in a fire. We put about 4,000 hours a year on it so we needed to replace it as soon as possible. However, it took six months to get it and it had numerous computer problems, mostly relating to thinking it has water in the fuel. You can’t use it until you fix the problem or short out the sensor wires to fool the computer. The company says they’re there for you 24-7, but they don’t provide any parts at the dealer. All you really need nowadays to fix equipment is an internet connection and a mechanic. Dealers have become useless. This tractor was a waste of money.”
John Deere 446 round baler
0 Best Buys1 Worst Buy“My 2000 Deere 446 round baler is my worst buy. It has problems ejecting bales out of the bale chamber. The problem is that the chamber was made too small. Some modifications were made at the dealership to stretch the chamber out, but it didn’t help and straw still won’t feed into the throat properly.”
John Deere 4475 skid steer
1 Best Buy0 Worst Buys“My Deere 4475 skid steer is a best buy. It’s used daily to move round bales.”
John Deere 4500 MFWD tractor equipped
1 Best Buy0 Worst Buys“My 2000 Deere 4500 MFWD tractor, equipped with a Yanmar diesel engine and 12-speed transmission, has exceeded my expectations. However, the hood, side panels, and grill are made of plastic and fell off. The company’s engineers must have really pleased the bean counters by substituting plastic for metal. Shame on them. If anyone has heard about a class action lawsuit against Deere by owners of this model, I’d like to hear from them ([email protected]).”
John Deere 450G dozer
0 Best Buys1 Worst Buy“I’ve owned Bobcat skid steer loaders for more than 20 years and they seem to get better with each year. My 1995 853 model has no bad habits and is a real money maker. It’s available with a wide variety of attachments which allows me to do a lot of different jobs fast. “I haven’t had any problems with my Deere 450G dozer in almost 10 years.” On the “worst buy” side, he lists his two Ford E-350 Econoline vans. “They’re both equipped with 7.3-liter diesel engines and automatic transmissions. They don’t start well and one of them has gone through two transmissions. Also, they get poor mileage and the brakes wear out prematurely.”
John Deere 450 Hydra Push manure spreader
1 Best Buy0 Worst BuysMark Herrold, Kewanna, Ind.:; “My 1987 Deere 450 Hydra Push manure spreader is a best buy. There’s no web to freeze or break, and it’s tightenough to haul liquid or solids.” On the negative side, “My Case-IH 496 25-ft. disk is a worst buy because the rock cushion springs break frequently.”
John Deere 4510 4-WD compact tractor
1 Best Buy0 Worst Buys“My Shindaiwa T3000 battery-operated straight shaft string trimmer is a best buy. I have two batteries and a charger and never run out of power.
“Another best buy is my Deere 4510 4-WD compact tractor with a loader. We use it all the time. It has turf tires, so it doesn’t tear up the lawn. I love it.”
John Deere 4555 2-WD tractor
0 Best Buys1 Worst Buy“It’s the most aggressive hay machine I’ve ever seen,” says Bruce about a 1994 New Hol-land 22550 swather. “It will cut heavy first cutting hay which is laid flat without plugging. It simply does an excellent job and we’ve had no trouble with it. “We’ve had trouble with the computer on a Deere4555 2-WD tractor we purchased with 440 hours on it. It shuts the hydraulic system down as well as most of the gauges. We also recently had to replace three injectors.”
John Deere 4555 MFWD tractor
1 Best Buy0 Worst BuysJohn nominates his 1989 Deere 4555 MFWD tractor, which he bought used two years ago, as his “best buy”. “It’s an excellent tractor, powerful and reliable with few electronic controls. We expect it to perform reliably for another 20 years.
“My Davis Instruments Weather Wizard III weather station is my worst buy. The basic weather station is well made. However, the accessories for it are absolutely terrible. The repeaters and software package were inoperable, and the company’s helpline wasn’t much help. When I asked for a refund I was threatened by their credit department. The entire experience with this company was one of utter frustration.”
John Deere 456 silage special round
1 Best Buy0 Worst Buys“It works fine with either wet or dry hay and can handle any size windrow at very high speeds,” says Kenneth, pleased with his Deere 456 “silage special” round baler. “The in-cab monitor makes it very easy to make bales. The machine hydraulically ejects the bale so I don’t have to back up. It also has unbelievable capacity.”
John Deere 4560
1 Best Buy0 Worst BuysJames Ferguson, Canby, Minn.: James is the owner of a 1992 Deere 4560 2-WD tractor equipped with a powershift trans“T spend as much time unplugging the baler and replacing shear pins as I do baling.” mission, “It has a lot of power, good visibility, and is comfortable to operate. The only problem is the engine uses a quart of oil every 20 hours,” “My 1994 Agco 918H lawn and garden tractor equipped with a 48-in, mower deck is my worst buy. It works fine and does a good job mowing, but I have a problem with the Kohler Command 18 hp engine Sometimes when IT shut off the engine or dismount and activate the mower’s safety shutdown switch, the muffler lets out a large explosion of hot gas, creating a potential safety hazard.”
John Deere 457 Silage Special round baler
1 Best Buy0 Worst BuysA 1999 Jay-Lor feed mixer rates as Alan’s “best buy”. “I use it to blend a mixture of high moisture round bales and grain which I feed to my dairy cows and heifers. The unit cuts the bales into pieces and then mixes them with the grain. It doesn’t require a lot of power and is built to last. I feel it has improved our herd’s milk production and health.
“My 2001 Deere 457 Silage Special round baler is a best buy. We bale most of our hay as low moisture silage. I had been using a New Holland 644 but had problems with the pickup head plugging up. Also, the bales had soft cores and would flatten out which made them hard to handle. The Deere baler is the same size as the New Holland model but makes much heavier bales.”
John Deere 458 Silage Special
1 Best Buy0 Worst Buys“I like my 2013 Claas 340 Rotocut round baler. I’ve used Claas round balers for years. Last year, when I was ready to update, I bought a Deere 458 Silage Special because I read that was the way to go. I made 748 bales with it. This baler was so inferior in bale quality and operator ease. I took quite a financial hit to get out of it and bought the new Claas. Now I never have to get off the tractor for any problems.”
On the minus side, he lists his 2011 Deere 6430 4-WD loader tractor with cab. “The dealer told me this tractor would outperform the 110 hp, 6-cyl. model I already owned. However, it was sluggish on the road, weak in the field, and burned 6 to 7 1/2 gal. of fuel per hour. The dealer made numerous repairs to the tractor, but after 600 hrs. I wasn’t satisfied. He gave me a decent trade on a new Deere 7330 tractor, which I do like.”
John Deere 4600 MFD tractor equipped
1 Best Buy0 Worst BuysA 1995 Deere 4600 MFD tractor equipped with a 460 front-end loader heads Terry’s “best buy” list. “It has a lot of hydraulic power which allows the loader to work fast. It also has a roomy cab and rides smooth. I really like the powershift transmission - it shifts smooth even at full throttle. The tractor had a few hydraulic problems but my dealer fixed them right away. It’s the best all-around tractor we’ve ever owned. However, the rear fenders could be improved. “My 1957 Caterpillar D2 is on its third set of rollers and chains but still works great. In the early years it had a problem with the dry clutch - after a hard push the clutch wouldn’t release. I solved the problem by sealing the bottom release shaft and pouring light oil into the clutch housing. No more problems with the clutch after 30 years.” On the minus side, he lists his Deere 3150 MFD tractor. “It bounced up and down the road like a rubber ball and was hard to shift on-the-go. It also had poor hydraulic pressure which caused the loader to work slow and it had a poor clutch. Despite all these problems it still had good trade-in value.”
John Deere 4600 MFWD tractor
1 Best Buy0 Worst Buys“It’s a wonderful tractor. No problems,” says Robert about his 1999 Deere 4600 MFWD tractor. “It’s economical to operate and doesn’t use any oil.
“I like my 2006 GMC 2500 pickup but it has nevertheless had some problems. I’ve had to replace the transmission’s oil cooler lines twice. The first time was under warranty, but the second time cost me $1,100. This pickup has a lot of power, but it only gets 15 1/2 mpg. It has about 92,000 miles on it.”
John Deere 4640 MFWD tractor
1 Best Buy0 Worst Buys“We bought a used 1982 Deere 4640 MFWD tractor with only 4,800 hours on it and it’s our best buy. It’s equipped with a 200 hp engine and a powershift transmission. We use it to pull our chisel plow. It’s a real workhorse.”
John Deere 465
1 Best Buy0 Worst Buys“My 2004 Deere 465 All Wheel Steer lawn tractor has great maneuverability and traction, even in heavy snow.
“However, I’ve had trouble with my 1993 Deere MFWD tractor equipped with a powershift transmission. I had to change the transmission and hydraulic filters every 50 hours or so. While shifting from forward into reverse, the transmission would stick in neutral and I would have to shut down and restart the engine, then shift back to park and go. I had all the fluids checked by Deere. They told me to change all fluids and filters and go another 100 hours. After 5,000 hours of use with all these problems, three pumps had to be replaced at a cost of $7,500. Little did I know, the brake shoes were disintegrating and plugging the filter. The company blamed the problem on operator error. Then the tractor caught fire and burned due to an electrical problem. I’m glad it’s gone.”
John Deere 4650 MFWD tractor
1 Best Buy0 Worst Buys“I bought my 1988 Deere 4650 MFWD tractor used with 200 hours on it. It’s my best buy. It now has more than 6,400 hours on it and still runs like new. It has needed only a few minor repairs. I really like the front wheel assist and don’t know how I ever got along without it in the past.
“My 1996 Deere 8300 MFWD tractor equipped with a 200 hp engine and 16-speed Powershift transmission is a best buy. It performs well and has a quiet cab. My only complaint is that it has a lot of electronics and if something goes wrong with that, I can’t fix it at all. I have to call for a service mechanic to trace down the problem and repair it. My father and I have run Deere equipment for over 40 years and really feel that ‘Nothing Runs Like A Deere’.
“My 1993 Ford F-150 4-WD pickup equipped with a 302 cu. in. engine and 4-speed transmission is my worst buy. This pickup has really soured me on Fords. It’s underpowered and gets a horrible 10 mpg without pulling a load. I can’t start out in second gear without having to rev the engine to at least 1,100 rpm’s. Otherwise the engine will kill. I won’t buy another Ford again.”
John Deere 4760 MFWD tractor
1 Best Buy0 Worst Buys“I’m well pleased with my 1997 Ford F-150 4-WD pickup equipped with a 4.6-liter V-8 gas engine. It gets 16 to 18 mpg and rides and handles like a car. “I also like my 1994 Deere 4760 MFWD tractor. It handles well and is fuel efficient.”
John Deere 4840 tractor
0 Best Buys1 Worst BuyRandy Ulmer, Lodge, S.C.: “It has poor fuel economy,” says Randy, who otherwise likes his 1982 Deere 4840 tractor.”
John Deere 4840 2-WD tractor equipped
1 Best Buy0 Worst Buys“It’s the best tractor I’ve ever owned,” says Ed, pleased with his 1980 Deere 4840 2-WD tractor equipped with 23 by 38 dual wheels. “The engine had more than 10,000 hours before it had to be overhauled. We updated it to 4850-style sleeves and pistons in order to get better fuel economy and extra power. The powershift transmission was overhauled at 11,000 hours. I didn’t make even one trip to the dealer before those repairs. It’s an excellent, clean tractor and doesn’t leak oil anywhere. I never bought any accessories for this tractor because it didn’t need any. It has a good lighting setup, and the batteries are well located.
“The view from the cab is good on both sides, but the exhaust pipe and air cleaner do block the front view considerably. The cab is equipped with a hydraulic-operated seat, which I really enjoy. I haven’t modified this tractor in any way. With new tires, a new engine, and a new power shift assembly, this will be my last tractor in my farming career. Because it took 24 years before this tractor needed repairs of any kind, I don’t expect to have to work on it again for a long time.
“My 1969 Allis Chalmers XT190 tractor isn’t green, but it sure stands up to Deere’s long green line as far as quality and durability are concerned. It was my main tractor when I bought it new in 1970. At the time, there wasn’t a better tractor anywhere in its category other than the rugged 4010 and 4020, which cost considerably more. It has a lot of power and still doesn’t leak any oil even though I’ve always worked it hard. It has a large roomy cab with a good view. This tractor has a super high-low dual shift transmission that can be shifted any time on-the-go. It shifts smooth, with no clashing of gears. I haven’t had any problems with the transmission to this day.”
John Deere 485 riding mowers
1 Best Buy0 Worst Buys“I like my 2003 and 2005 Deere 485 riding mowers, which are equipped with 54 and 60-in. mower decks. We use these mowers around our farm and also around our apartment buildings. They drive smooth, have a lot of power, and really eat up the grass. My wife calls them her ‘convertibles’.”
John Deere 494 corn header
0 Best Buys1 Worst BuyJohn purchased two self-loading gravity baskets for small square bales from E-Z Trail two years ago and says they’re both best buys (E-Z Trail, Inc., Box 268, Arthur, Ill. 61911). The baler pushes bales up a self-loading chute and into the wagon to eliminate the need for a bale thrower. A rope-operated latch allows the operator to unload a full load of bales with a tug of the rope from the tractor seat. “The wagons save labor and time. With one pull of a lever I can unload 100 square bales at a time. Using two of these wagons is like having three conventional wagons.” On the minus side, he’s disappointed with his 1995 Deere 494 corn header. “The fit and finish was poor - one of the outside divider points was off by 3 to 4 inches. A company block man came out and decided that the header frame was out of tolerance when it was welded together at the factory. The company replaced the frame for us, but it never should have left the factory this way.”
John Deere 495 riding mower equipped
1 Best Buy0 Worst Buys“I like my Deere 495 riding mower equipped with a 56-in. mower deck and Yanmar diesel engine. I use it to mow two to three acres every summer.
“My Deere 4-WD Gator is also equipped with a Yanmar diesel engine. It’s a good, heavy machine. I use it to check on cattle and to do chores around my farm. Yanmar diesel engines cost more but make up for it with power and fuel efficiency.”
John Deere 4960 MFWD tractor
1 Best Buy0 Worst Buys“I bought a 1994 Deere 4960 MFWD tractor and liked everything about it. Then the dealer called and said the factory had put the wrong bolts inside the rear end. They had to split the tractor apart and remove the cab. When the tractor came back it leaked oil and the hydraulic controls didn’t work. Those problems have been fixed now, but I didn’t expect this to happen on a new tractor.
“I bought a new 30-ft. Deere 455 press wheel drill and had to put two wide baler wheels and tires on it in order to keep it from sinking into the ground on turns. It should come from the factory with four large tires.”
John Deere 4995 swather equipped
1 Best Buy0 Worst Buys“My 2004 Deere 4995 swather equipped with a rotary cutterbar is a best buy. It cuts anything fast and clean.
“My 2004 DMF grain trailer is built tough and is equipped with user-friendly T-handle gate openers.”
John Deere 4-row 1750 planter
1 Best Buy0 Worst Buys“I’ve had no major problems in the first year,” says John, “generally satisfied” with his 1998 Deere 4-row 1750 planter. “However, seed spacing could be better and it needs grease zerks on the hydraulic lift linkage to extend life.”
John removed the original tongue from the planter and replaced it with a bridge hitch so he can mount a Roterra on his 3-pt., between the tractor and planter. “By pulling the planter behind the Roterra we are able to do final tillage, spray and plant in one pass,” he says.
John Deere 4-WD Terra Gator
1 Best Buy0 Worst Buys
“It’s the handiest little machine I’ve ever used,” says Vernon Hoffman about his 2003 Deere 4-WD Terra Gator.
Read the whole story →John Deere 50 tractor equipped
1 Best Buy0 Worst Buys“My best buy of all time is my 1967 Deere 50 tractor equipped with an aftermarket wide front end and power steering. It has more than 9,000 hours on it but still works good and starts easily. The wide front end has a low center of gravity which is great on rolling ground. The tractor is also comfortable to drive. We use it to pull a 7-ft. sicklebar mower most of the summer.”
John Deere 500 industrial loader
1 Best Buy0 Worst BuysA 1968 Deere 500 industrial loader that he bought used four years ago rates as Neil’s “best buy”. “This tractor has a lot of hours on it and has been used hard. It smokes and rattles, but it always does what we want it to. We use it to plow snow, to move heavy objects, and to carry scrap cars.”
John Deere 500round baler
1 Best Buy0 Worst BuysForest Koone, Union Mills, N.C.: Forest's impressed with his Deere 500round baler. “Even though it’s a closed throat baler it does a good job as long as the hay is cured properly.”
John Deere 5020 tractor
1 Best Buy0 Worst BuysJim’s had good luck with his 1971 Deere 5020 tractor. “It was relatively inexpensive and has been reliable, comfortable, and fairly fuel efficient. It has 10,000 hours on it and I think it’ll last at least another 5,000 hours.”
John Deere 5045 4-WD
1 Best Buy0 Worst BuysClinton’s the satisfied owner of a 2021 Deere 5045 4-WD with loader. “The hydraulics will pick up an elephant. I think I need to widen out the rear tires.”
John Deere 5045D tractor equipped
1 Best Buy0 Worst BuysCarl’s impressed with his 2012 Deere 5045D tractor equipped with a Deere 512 frontend loader. “I use this tractor all year long, with a snowblower in the winter and to do mowing, grading and other jobs the rest of the year. It’s a great tractor. All the controls are conveniently located, and the 3-cyl., 45 hp. diesel engine has plenty of power and is fuel efficient. It’s a basic tractor with no computer junk.”
John Deere 5045E diesel utility tractor
1 Best Buy0 Worst BuysDean says his 2013 Deere 5045E diesel utility tractor, equipped with a Deere 553 frontend loader, “works great and has easy-to-use controls. It also has much bigger front wheel assist tires and a bigger axle than the competition, and it’s about 12,000 lbs. heavier. I love this tractor.”
John Deere 5045E 4-WD tractor equipped
1 Best Buy0 Worst Buys“My 2010 Deere 5045E 4-WD tractor equipped with a front-end loader is easy to operate, dependable, and has a good selection of ground speeds. It’s also easy on fuel.”
On the negative side, he lists his Shindaiwa chainsaw. “The bolts on the bar clamp are soft and strip the threads easily, and replacing them requires separating the engine block. I threw away a saw with less than 5 hrs. on it, as the dealer I bought it from went out of business shortly after I bought it. I went back to using my 25-year-old Poulan Pro 395, which is a heavy but dependable chainsaw.”
John Deere 5055 diesel tractor
0 Best Buys1 Worst BuyWilliam bought a used Deere 5055 diesel tractor with about 300 hrs. on it for $28,000. The tractor is equipped with a cab and was made in India. “The first time I used it the fuel line came apart, causing a full tank of fuel to leak out. The hydraulic couplers leak, a metal caution sign fell off, and the tractor vibrates badly when driving down the road. Also, the transmission is very loud. This is the worst tractor I’ve ever owned.”
John Deere 5055E 4-WD 50 hp
1 Best Buy0 Worst Buys“I’m still actively farming at 93 years old, and my 2017 Deere 5055E 4-WD, 50 hp. tractor is neither the best nor worst tractor I’ve ever owned. However, I doubt the design engineers ever go out and operate their tractors under farm conditions. Here are some additions that I think would make this tractor more user friendly, without adding too much to the cost.
“An indicator to tell what gear you’re in. My older Deere 3040 has a ‘dedicated indicator’ with finger-like slots. Even an electronic indicator would be better than nothing.
“A hand emergency brake. The parking gear on this tractor is cumbersome, so much so that a neighbor with a similar tractor model jams his front-end loader on the ground instead of using the parking gear.
“A larger pto lever. The lever on this tractor is impossible to hold onto when wearing heavy gloves or mittens.
“Wider steps to accommodate both feet when wearing winter boots.”
John Deere 5075 tractor
0 Best Buys1 Worst Buy“I purchased a Jonsered Iron Horse about 20 years ago. It’s primarily used when working in my woods gathering firewood. It’s a low-impact tracked unit that’s very maneuverable and can go up and down slopes that are steeper than I can walk comfortably. I’ve also found it useful for hauling tools and fertilizer when working in my tract of black walnuts. I liked it so much I bought a second unit, so I have one configured with a cargo bed, the other with the ‘log bunk’ for hauling logs out of my wood lot.”
Keith isn’t pleased with his 2018 Deere 5075 tractor he bought used in 2020 with 180 hours. “I should’ve researched the model better before I bought it. After purchasing, I read the user manual and discovered that the tractor hydraulics aren’t to be used for powering orbital hydraulic motors. My main intended use for it was driving a woodchipper with hydraulic feed rollers. I had to outfit my new chipper with an auxiliary hydraulic pump. Then, I later discovered that the pto isn’t able to drive the chipper with larger material. That’s what I bought it for.”
John Deere 5075M
1 Best Buy0 Worst BuysCharles is the proud owner of a 2014 Deere 5075M “no cab” tractor. “We bought it after we lost our 1969 Deere 3020 diesel tractor in a fire. It had more than 24,000 hrs. on it and was a handy tractor around our barns. It was one of the few built in 1969 equipped with a side console.
“The 5075M has exceeded all our expectations. We equipped it with 15.5 – 38 tires, which gives it good ground clearance. It’s a pleasure to drive, has a comfortable seat, a tilt steering wheel, handy controls, and an excellent transmission with power reverser. It has a lot of power for its size. I’d recommend this tractor to anyone.”
John Deere 5075 MFWD tractor
1 Best Buy0 Worst Buys“It’ll go anywhere and turns on a dime. It’s also easy on fuel,” says Steve about his 2010 Deere 5075 MFWD tractor. “It has about 360 hrs. on it with no problems. My wife likes driving it, too.”
John Deere 5083E tractor
1 Best Buy0 Worst Buys“After only 77 hrs. of use the power steering went out on my 2009 Deere 5083E tractor. Two bolts on the left side were lost, and two more on the right side were ready to drop out. The dealer came and got the tractor, which was still under warranty. He fixed it and brought it back to me. But at 155 hrs., the same problem happened again, and this time the warranty had expired. I told the dealer I didn’t intend to pay to have it fixed, so he and the company went back and forth over it and kept my tractor for 2 mos. before I got it back.
“The company claims they’ve never seen this problem before. They want me to let them know after every 20 hrs. I use the tractor so someone can come out and check the bolts because they couldn’t figure out a solution to the problem.”
John Deere 5085E compact tractor work
1 Best Buy0 Worst Buys“The brakes on my 2014 Deere 5085E compact tractor work great as long as I pump them once. However, sometimes that’s a problem, such as when driving on a steep grade or doing precise loader work. We bled the brakes but it didn’t help. The company says they’ve discovered a way to fix the problem, but that I would have to pay for it. The tractor’s warranty has expired but the brakes have been a problem since new. They’ve tried to fix the problem at least twice under warranty, but to no avail.”
John Deere 5093E Limited tractor
1 Best Buy0 Worst Buys“This is one tough little tractor. No problems,” says Gary about his 2005 Deere 5205 tractor equipped with a 522 front-end loader.
“My 2009 Deere 5093E Limited tractor has had two problems in the first 100 hrs. First, the cab doors don’t fit right. The dealer tried to adjust the doors but they’re still cracked at the bottom. Second, a throttle linkage problem made the engine surge up and down. The dealer installed a new throttle linkage, which helped.”
John Deere 5095 M
1 Best Buy0 Worst Buys“It’s a wonderful, user-friendly tractor with plenty of power,” says Paul about his 2010 Deere 5095 M.
John Deere 5100E
1 Best Buy0 Worst Buys“It’s a great tractor with a lot of power, but it has some problems,” says Delfina about their 2013 Deere 5100E. “The front end is too high to see the rows in the field, and the steps are too high to climb. Also, the door on the cab is difficult to open.
“My Deere 3038E utility tractor works great, but whenever I use it to shred weeds or operate a tiller I wish it had a cab.”
John Deere 5102 tractor
1 Best Buy0 Worst Buys“My 2002 Deere 5102 tractor is built rugged. No problems. My only suggestion would be to reroute the control wires for the lights and the gas tank. The wires are routed along the bottom of the tractor, which could create a problem when working in heavy brush.”
John Deere 5105M tractor equipped
1 Best Buy0 Worst BuysFritz is the satisfied owner of a Deere 5105M tractor equipped with a 563 front-end loader. “After freezing for years in tractors without cabs we felt we had earned this great loader tractor. It has a slight delay going into reverse, which can be frustrating, but it’s probably safer to use that way. Also, the joystick’s plastic handle broke after five years of use.
“My LL Bean waxed cotton, down-filled chore coat is heavy and smells like an old Army surplus store. It provides great protection from the cold and wind (www.llbean.com; ph 888 615-9974). This company stands behind its products.
“I wish Gates Rubber Co. still made Green Wellies rubber boots. They came as medium or wide and mine lasted for two years. Then the company sold out, and I’ve found that boots made by the new company fall apart in just a few weeks. If anyone knows of a good boot to fill this niche, I’d like to hear about it. All the plastic boots and wet suit-like boots I’ve seen are either too hard or cause your feet to get hot.”
John Deere 5105 MFWD tractor
1 Best Buy0 Worst Buys“My Deere 5105 MFWD tractor and 522 frontend loader has about 1,000 hrs. on it. It’ll handle two 1,000-lb. round bales at the same time with no problems. Excellent traction in 4-WD.”
John Deere 510 7-shank deep ripper
1 Best Buy0 Worst Buys“My 2005 Kubota TRV 900 utility vehicle is built heavier than a Gator, and the diesel engine burns little fuel. It has enough power to pull two bale wagons loaded with hay.
“My Deere 510 7-shank deep ripper makes fields unlevel. The disk blades keep loosening up and the arbor bolt breaks. The dealer said we needed 850 ft./lbs. of torque, but it still didn’t help. Finally we got so disgusted with it that we sold it and bought a Case IH Ecolo-Tiger 730B, which we really like.”
John Deere 5115M MFWD tractor equipped
1 Best Buy0 Worst BuysA 2014 Deere 5115M MFWD tractor equipped with an H260 front-end loader rates as John’s “best buy”. “It has a good cab, well-placed controls, and has plenty of power for its size. Also, it’s fairly fuel efficient and has a lot of hydraulic power.”
John Deere 520 tractor
1 Best Buy0 Worst Buys“My old Deere 520 tractor still runs like a charm, and the best part is that it’s going up in value. If I ever have to replace the clutch I can do so in less than 10 minutes. The power steering on this tractor is good for my arthritis, and the power lift is good enough to handle more modern implements.”
John Deere 5200 tractor
0 Best Buys1 Worst Buy“It continues to work well for me year after year with only regular maintenance. No major problems,” says Abe about his 1985 Husqvarna 266 chain saw.
His “worst buy” is his 1997 Deere 5200 tractor. “The collar shift transmission is almost impossible to engage without grinding the gears. I also had problems with the clutch, and the starter had to be rebuilt, all at less than 120 hours. The noise level is so high that I can’t operate it comfortably without using ear plugs.”
John Deere 5200 4-WD tractor
1 Best Buy0 Worst BuysChuck’s impressed with his locking grease coupler from LockNLube (www.locknlube.com; ph 603-795-2298). “I do a lot of greasing on my various tractors and implements. I’ve always preferred the lever-style grease guns instead of the pistol grip ones. I frequently find myself needing a third hand to hold the coupling onto the zerk fitting. But with the locking coupler from LockNLube, I can free up one hand. This has led to less mess and a lot less frustration which in turn leads to better and more frequent maintenance.
“I bought an old Deere 5200 4-WD tractor. When it’s working, it’s a great machine. But every time something tears up, the cost and hassle of getting parts from the Deere dealership drives me nuts.”
John Deere 5205 56 hp 4-wd tractor
1 Best Buy0 Worst Buys“My new Deere 5205 56 hp 4-WD tractor equipped with a 541 front-end loader is my best buy. It always starts, even in the coldest weather. I’ve buried this tractor up to the frame in mud but have always been able to get out. It’s fuel efficient and easy to service with a clear and concise owner’s manual. No problems. It’s a simple, basic tractor that gets the job done.
“My Stihl 270 chainsaw starts hard and guzzles gas. It has frequently been back to the dealer. It won’t start in cold weather so I built a warming box to keep it warm during the winter. Another problem is the anti-kickback cutting chain won’t cut. This chainsaw is fragile and temperamental and only runs on high-test gas.”
John Deere 5220 tractor equipped
1 Best Buy0 Worst Buys“My 2003 Deere 5220 tractor equipped with a Syncshuttle transmission and a 541 front-end loader operated by a joystick control lever is my best buy. It’s a good utility tractor that works great for loader work and also for pulling my rotary mower. It has plenty of power.”
John Deere 5220 4-WD tractor handles great
1 Best Buy0 Worst Buys“My 2003 Deere 5220 4-WD tractor handles great. I’m impressed with the power and how it handles on hills.
“No problems with my Ford New Holland 3930 and 4630 4-WD tractors. The 4630 handles better, but the 3930 uses less fuel.”
John Deere 5225 utility tractor
1 Best Buy0 Worst Buys“My 2007 Deere 5225 utility tractor is great when it’s working. However, it has had a multitude of electrical issues and blown fuses. The starter went out a little after 400 hours. We’ve already spent at least $2,500 on this tractor. We hold our breath whenever we use it, wondering if it’s going to work.”
John Deere 5225 MFWD tractor equipped
1 Best Buy0 Worst BuysHe likes his 2006 Deere 5225 MFWD tractor equipped with a cab, power reverser transmission, and front-end loader. “Deere made a winner when they came out with their 25 series tractors. This tractor has a quiet cab, is comfortable, and has adequate power. If you don’t overload or abuse it it’ll provide excellent service. I also own a Deere 5525 model that works great. Both tractors are built rugged, as are the 500 and 600 series front-end loaders that I use with them.
“My 2003 Dodge 1-ton longbed pickup equipped with a 4-door cab, High Output Cummins diesel engine, and 6-speed manual transmission is a best buy. It rides and drives wonderfully. No problems. We added a K&N air filter kit which we’re quite happy with (ph 800 858-3333; www.knfilters.com). This pickup is the best hauler I’ve ever driven. I’ve owned several Fords and GM pickups over the years, but my Dodge has a lot of power and will walk away from them. There’s a reason you see so many Dodge pickups pulling livestock trailers, fifth wheel rigs, and machinery trailers, etc. on the road. It gets 18 to 21 mpg empty and 14 to 16 mpg towing a heavy load, which I think is pretty good.”
John Deere 525 front-mount 3-wheel
1 Best Buy0 Worst BuysJohn Warren, Ames, Iowa: John says his Deere 525 front-mount, 3-wheel lawn mower cuts mowing time in half. “Its steering wheel is easier to use than the joysticks found on other mowers.”
John Deere 5300 2-WD tractor
1 Best Buy0 Worst Buys“I have several best buys. I received two ‘headlamps’ as Christmas gifts last year. I never thought that such a simple item could be so useful when working in poor light conditions such as under machinery, in cellars, or even outside after dark. I don’t use them every day, but they sure are handy when needed. I recommend getting one or two.
“A Deere 4110 small frame compact tractor that we purchased from my father-in-law’s estate has been truly outstanding. Although the 410 loader doesn’t have a high lift height, it’s become a favorite machine for light-duty rotary mowing and other barnyard chores. The two-range hydrostatic transmission works well, and the fuel consumption can be measured in quarts per hour. It’s not a big tractor, but it can do a lot of work.
“My well-used Deere 5300 2-WD tractor purchased with more than 2,600 hrs. on it has been a money maker for us. It’s used primarily for raking, tedding, spreading fertilizer, rotary mowing, and general yard work. We haven’t had any repairs beyond yearly maintenance other than replacing some linkage on the hydraulic SCV valves. The 12 by 12 reversing transmission with a positive park-lock provides plenty of speed selection and fuel economy is excellent. I think later models have a slightly redesigned operator’s platform that provides more room for the operator as this one is somewhat on the tight side. It’s simple, effective, and has no computers.
“For package quantities of specialized fasteners, I’ve found that McMaster-Carr is the place to go (www.mcmaster.com). An excellent website makes it easy to select the product you need. They offer a tremendous variety of industrial supplies.
“For more common fasteners such as bolts, nuts, etc., I use The Nutty Company based out of Milford, Conn. (www.nutty.com; ph 800-468-8891).
“Unfortunately, I do have a worst buy as well. Although I enjoy its size, capability, excellent cold weather starting, and fuel economy, my Deere 4300 medium frame compact with a 430 loader equipped with the 12 by 12 mechanical reversing transmission has had many issues with the transmission/clutch design. I thought that a gear drive machine would be better for occasional field use such as raking or tedding, but it hasn’t worked out that way. The ratios of the transmission have too much overlap and no matter which of the three ranges you select, there is often no gear available to provide a suitable speed. Although the mechanical reverser may work well in design, we’ve had a dealer do major clutch adjustments twice (which requires splitting the tractor and is extremely difficult to do) which did not last. A third disassembly in our shop revealed a failing reverse shaft bearing which caused excessive end-play in the transmission shaft which affected clutch adjustment. Next time, I’ll try the hydrostatic version of this size machine. I like the extremely strong 430 loader and the fact that most of our loader attachments can be shared with a smaller 4110 tractor and a larger 5425 tractor but there has been too much downtime.”
John Deere 5300 4-WD tractor
1 Best Buy0 Worst Buys“In the last issue of FARM SHOW a Texas man said that based on his experience, he wouldn’t recommend the Magnum cutting torch for the average farmer. He said it burns very hot but is difficult to control and expensive to run. As a certified welder and diesel technician, I’ve had a similar experience with my Magnum torch. It has a lot of power, but it has some drawbacks. I don’t recommend that anyone get rid of their oxygen, acetylene, or plasma cutter before buying a Magnum. However, it burns hot and works good for penetrating thick material beyond conventional means. I’ve actually used it to cut holes in rocks up to 6 in. thick and to cut cast iron. One time I used it to cut a notch in a 27-in. dia., 4-in. thick flywheel. It also works good for washing out large welds. However, the rods for it are expensive and don’t last long enough. It throws a lot of fire and sparks.”
He’s “generally satisfied” with his 1996 Deere 5300 4-WD tractor but says it could use a few improvements. “It has adequate power and hydraulics. However, I think this tractor is too light on back to be used with a front-end loader. The grill and fenders are made of plastic, and the seat is poor quality. I built a bumper and grill guard and added a pair of 3 by 5-in. lights on the fenders. I added a 6-hole trailer plug so I can hook up implement lights. I built a skid plate that goes from the bumper to the drawbar. I also made hose protectors to cover the hydraulic hoses on the loader.”
John Deere 5320 tractor
1 Best Buy0 Worst Buys“The 3-cyl. engine on my Deere 5320 tractor is real easy on fuel. I sell hay which I have to haul over a lot of hills, four loads a day. I had been using a Deere 5400 tractor which used to burn a full tank of fuel every day. The 5320 does the same work on only a half tank of fuel.”
John Deere 5325 tractor
1 Best Buy0 Worst Buys“My Deere 5325 tractor is user friendly and has never let me down. It has an air ride seat and loader ride control, which makes it comfortable to drive in fields.
“My 2001 Dodge Ram 1500 4-WD pickup is my worst buy. I had to replace the transmission 5 times before I finally traded it. The pickup’s front end is built weak and I had to replace a ball joint twice.”
John Deere 5325 MFWD tractor
1 Best Buy0 Worst Buys“I like my 2008 Deere 5325 MFWD tractor. It’s equipped with a 553 front-end loader, 24-speed shuttle transmission and a fully equipped cab. I really like the quick-tach bucket. I bought a bale spear and pallet forks for the loader, and I can change from one to the other in less than 5 min. The engine runs smooth but is somewhat noisy.”
John Deere 5403 loader tractor failed
0 Best Buys1 Worst Buy“The pto clutch on my 2007 Deere 5403 loader tractor failed about 100 hrs. after I bought the machine. I had the clutch fixed, but less than 200 hrs. later the same thing happened again. The engine started leaking coolant and the transmission and 3-cyl. engine started sounding bad, so I traded the machine under warranty.”
John Deere 5410 4-WD tractor equipped
1 Best Buy0 Worst BuysA 1998 Deere 5410 4-WD tractor equipped with a front-end loader and a cab, air conditioner, and heater rates as Charles’ “best buy”.
He’s also happy with his Deere 425 garden tractor equipped with a 54-in. mower deck. “It’s a 20 hp model so it has a lot of power for mowing my lawn. It has reduced my mowing time by up to one hour compared to the 18 hp mower I had been using.
“My 1999 GM Sierra Classis 1500 series pickup has performed exactly as I expected. It’s a best buy.”
John Deere 5420 2-WD 65 hp
1 Best Buy0 Worst BuysBill’s happy with his 2002 Deere 5420 2-WD, 65 hp tractor. “This is my second Deere 5000 series tractor. My other one was a 5400. The 5420 has an improved operator station which is isolated from the frame. It has a comfortable ride, is easy to operate, is built strong, and has been trouble-free. I’ve never had a bad experience with a Deere product. I also like my Deere MX10 cutter and a 2003 Deere 4310 MFWD compact utility tractor.
“My 2001 Troy-Bilt 6 hp Econo-Horse tiller is my worst buy. It has less than 10 hours on it. The gearbox pulley and drive gear went out. I also had problems with the carburetor. I put two floats in the carburetor before I finally gave up and installed a complete new carburetor. It’s equipped with a Tecumseh engine, but I think another brand would work better.”
John Deere 5420 4-WD tractor equipped
1 Best Buy0 Worst BuysJim likes his Deere 5420 4-WD tractor equipped with a front-end loader. “This is a solid, mid-size tractor and I’ve had no problems with mine. We use it for cleaning out our pole barn, handling round bales, and operating our 7-ft. snow blower. If the rest of the Deere equipment line works as good as this tractor, we’ll be switching from red machinery to green.”
John Deere 5425 tractor
1 Best Buy0 Worst Buys“It’s a joy to operate and is the handiest tractor I’ve ever operated,” says Troy about his 2007 Deere 5425 tractor. It’s equipped with an 80 hp engine, cab, shuttleshift transmission, and 542 front-end loader. “It offers all the benefits of a larger tractor, yet can lift and handle a 6-row ridge-till cultivator with all the nimble qualities of a smaller tractor. It can turn short and isn’t at all clumsy. The view from the cab is like the view from a picture window. I like this tractor better than I even thought I would.
“My 1998 4-WD Jeep Grand Cherokee is my worst buy. Although it was comfortable and handled nice, I couldn’t drive it enough miles consecutively to really enjoy it. This vehicle was truly a ‘nickel and dimer’ and was always in the shop. Finally I took it back to the guy I bought it from. I took a loss on it and gladly said good riddance.”
John Deere 544B 4-WD loader
1 Best Buy0 Worst Buys“It’s extremely dependable and doesn’t cost much to operate,” says Roger, well pleased with his 1979Deere 544B 4-WD loader. “It currently has 18,000 hours on it. The engine, transmission and axles are all original. It has been back to the dealer for repairs only once in 18 years of service.”
John Deere 5500 4-WD tractor equipped
0 Best Buys1 Worst BuyEugene’s “worst buy” is his 1996 Deere 5500 4-WD tractor equipped with a 540 front-end loader. “I special ordered it from the factory last May. I soon learned that my old 1948 Deere 2-cyl. ‘B’ has a better hydraulic system than this tractor. The loader won’t stay up. One time I hooked up to a field cultivator and drove toward the field a half mile away, but the shovels dropped and dug into the road twice before I got there. When I was in the field I had to raise the cultivator every few minutes in order to keep it from digging too deep. When I used it to mow roadside ditches I couldn’t keep the sicklebar out of the dirt. “The company told me it’s normal for the hydraulics to drop this way and wouldn’t do anything to help. At my insistence, the company took the tractor back and I bought a new 6300 which has exactly two horsepower more than the 5500. It works okay. However, it cost me $6,864 to get two extra horsepower.” He’s had better luck with his 1994 Deere 338 small square baler. “I’ve used it to make more than 25,000 bales with no problems. It’s easy to service and to clean up. The only time it misses a bale is if we tie a poor knot between balls of twine.”
John Deere 550 Mulch Master tillage implement
1 Best Buy0 Worst BuysLowell’s impressed with his 1994 Deere 550 Mulch Master tillage implement. “I bought it in order to comply with government programs. The first time I used it to kill an alfalfa field and it worked great. After that I mounted a 300-gal. tank on it so that I can incorporate Treflan in one pass. The only problem is that it takes a lot of power. However, considering the work it does, that’s okay.”
John Deere 5510 4-WD tractor equipped
1 Best Buy0 Worst Buys“I own a 2002 Deere 5510 4-WD tractor equipped with a synchromesh transmission. I used it to disk eight acres of plowed ground and it jumped out of gear 32 different times. It was repaired and doesn’t jump out of gear much now, but it still doesn’t always shift right. If I happen to bump the shift lever it jumps out of gear.”
John Deere 5525 tractor
1 Best Buy0 Worst Buys“Two years ago we bought a used 2009 Kubota zero turn riding mower equipped with a 48-in. deck, and it’s the best mower we’ve ever owned. It has a great seat, cuts evenly, and is easy to handle.
“We bought our 2007 Deere 5525 tractor used in 2010 with 500 hours on it. The first time we used it oil got mixed in with the anti-freeze. They said the engine cooler was porous and there was no warranty coverage for the repair. The person we bought it from said it wasn’t his fault. Now if we don’t start the tractor once a week it’ll lose its prime and won’t start. We may have to install new lines and a new electric fuel pump.”
John Deere 5525 MFWD loader tractor
1 Best Buy0 Worst Buys“I like my Stihl MS250 chainsaw, HT 100 pole chain saw, and B686C leaf blower. They’re all quality built. We use the pole chain saw for trimming work in our apple orchard. It has five years of hard use on it but always starts and has required only minor repairs.
“I bought my Deere 5525 MFWD loader tractor used with 466 hrs. on it and really like it. The cab is a great improvement over the one on my older Massey-Ferguson tractor, and the air conditioner works well. I especially like this tractor’s speedometer and the power reverser. Fuel consumption isn’t bad, and it doesn’t use any oil.”
John Deere 55V chain saw
1 Best Buy0 Worst Buys“It’s been 13 years since I bought my Deere 55V chain saw (made by Echo) equipped with a 20-in. bar, and to this day it still starts on the first or second pull. Hands down, it’s my best buy ever.”
John Deere 5670 combine
0 Best Buys1 Worst Buy“In February 2015 I bought a new 2014 Deere 5670 combine, after the engine on my 2008 Deere 9770 burned up and the company wouldn’t stand behind it. However, the 5670 turned out to be my worst buy ever. The electrical system on it was no good, and the emergency brake would engage without warning. Because of these problems we had trouble getting our crops harvested, but thankfully our neighbors helped out.”
John Deere 569 round baler
1 Best Buy0 Worst Buys“So far my 2014 Deere 569 round baler does a good job of baling hay that would have ‘slugged’ my older Vermeer model.”
John Deere 5730 self-propelled forage harvester
1 Best Buy0 Worst BuysVictor Barrick, Carlisle, Penn.: Victor nominates his 1988 Deere 5730 self-propelled forage harvester as a “best buy”. “It chops haylage, corn silage and high moisture car corn fast.” On the “worst buy” side, Victor’s unhappy with his 1988 Silo Matie Gemini II silo unloader, “It vibrated and bounced so bad that it fell apart, and the pieces fell into the blower and tore itup. The dealer worked on itseveral times, then told me I didn’t fill the silo right. finally had to dig two bunker silos.”
John Deere 575 skid steer loader
1 Best Buy0 Worst BuysRaymond’s impressed with his 1989 Deere 575 skid steer loader. “‘Reliable’ and ‘per-
(Continued on next page) formance’ are two good words to describe it. It has more than 1,500 hours on it but still performs like new. We put on a new set of tires and replaced two front lights that burned out. Otherwise, just regular maintenance. It has excellent hydraulic lifting capacity for its size although the hydraulics could work a little faster. Also, it starts right up in cold weather.”
John Deere 582 lawn mower
0 Best Buys1 Worst BuyHoward Schmidt, Marine City, Mich.: Howard's had problems with his 1987 Deere 582 lawn mower. “The 30-in. blade has so much suction that when J cut low it scalps the sod and tears it right out. If I pull the blade up a notch it takes a bite here and another bite there which makes the lawn look like a sick cow has grazed it. It also threw stones through several windows in our house and barns.” He likes his 1989 Simplicity 17 hp, 48“It takes a bite here and another bite there which makes our lawn look like a sick cow has grazed it.” in, cut lawn tractor and mower equipped with hydrostatic drive. “It handles nice, turns short, and cuts smooth without scalping. It seldom throws stones and when it does it keeps them low.”
John Deere 582 Silage Special baler
1 Best Buy0 Worst Buys“My 2006 Deere 582 Silage Special baler has design problems. The tongue jack is too light, and the pto shaft is impossible for one person to hook up. It needs to have rotational ability so it can be lined up with the tractor’s pto spline. The net wrap is a real joke. Also, the tongue on this baler is too short.”
John Deere 585 4-WD garden tractor
1 Best Buy0 Worst Buys“I use my 2004 Deere 585 4-WD garden tractor to mow and to clear snow. No problems. It has a lot of power and, when equipped with chains in the winter, it’s nearly unstoppable.”
John Deere 590 36-f
1 Best Buy0 Worst BuysTodd Farnsworth, Pennant, Sask.: Todd's impressed with his 1990 Deere 590 36-f. windrower. “I’ve used it to cut 1,700 acres in all conditions and the only repair was to a broken knife section. My land is scattered over 25 miles so ease of transport was the major reason I selected this machine. The center delivery and wide swath opening allow for even feeding across the entire cylinder.” Todd isn’t impressed with his 1989 5 hp Banjo pump. “It primed easily and pumped good when it was new, but it quit pumping altogether after very litle use. Upon close inspection I noticed very small grooves in the impeller. The dealer told me that’s all it takes to make it quit pumping. He isn't handling these pumps any more so I had to order a repair kit from a wholesaler.”
John Deere 60 tractor
1 Best Buy0 Worst Buys“I farmed with my Deere 60 tractor for many years before retiring about 10 years ago. Then I gave the tractor a new paint job and now display it at tractor shows and drive it in parades.”
John Deere 6000
1 Best Buy0 Worst Buys“I work for a snow removal company that uses late model Deere 6000 series tractors equipped with model 640 front-end loaders. In my opinion, these loaders are built way too light. There’s no comparison to my own personal 1993 Case 520 loader which I use on a Case 5220 tractor. It’s a no nonsense, indestructible loader.
“The same snow removal company just bought two new Kubota M126X tractors. I never knew a machine could be absolutely perfect until these tractors came along. I can’t decide whether they’re the Cadillacs or the Rolls Royces of the tractor world.”
John Deere 600 5-wheel ATV
1 Best Buy0 Worst Buys“It’s one of the best machines I’ve ever owned,” says Ken about his 1986 Deere 600 5-wheel ATV. “I use it every day to haul firewood, pull a log splitter, haul yard waste, and pull logs out of swampy areas using a long chain. Over the years all I’ve had to replace were a drive belt, spark plug and starter.”
John Deere 600 AMT
1 Best Buy0 Worst Buys“Our 1988 Deere 600 AMT is dependable. We use it to haul more than 2,000 bales of hay and straw each year and also to spray fence rows and fix fence and many more jobs. It saves a lot of wear and tear on pickups.”
John Deere 6030 tractor
1 Best Buy0 Worst Buys“The 1975 Deere 6030 tractor I bought used is a best buy. This tractor is built with strength and power. It’s rated at 175 hp but actually puts out well more than 200 hp. If anyone knows of a front wheel assist option for this tractor, I’d like to hear from them. Front wheel assist would make this the ultimate farm tractor.
“I’ve been driving a 2000 Volvo truck equipped with a Detroit 60 series engine on a Canada/U.S. run for the past 5 years. Since Chevron 15-40 oil is quite common to truck stops in both countries, I used this oil. However, the truck seemed to be using a lot of oil as I was adding 2 U.S. gal. on every 4,000-mile trip. At home I’ve used Deere 15-40 plus 50 oil in all my trucks and farm tractors for years.
“Oil sampling has been a regular part of our equipment maintenance program, and this is where I discovered the Chevron oil was breaking down much more rapidly than the Deere 15-40 plus 50 oil. After I started using Deere oil on the Volvo, the Volvo’s oil consumption dropped to about 1/2 gal. per 4,000-mile trip. Along with this major reduction in oil consumption, I also realized a gain of about 1 1/2 mpg in fuel efficiency.”
John Deere 6030 2-WD tractor
1 Best Buy0 Worst Buys“My 1975 Deere 6030 2-WD tractor has more than 8,000 hours on it with few problems and is my best buy. It has a lot of power, a good hydraulic system, and pulls great. It’s also reliable.
“My 1997 Chevrolet K1500 4-WD pickup equipped with a 350 cu. in. Vortec engine and automatic transmission was bought used with about 30,000 miles on it. The truck now has about 195,000 miles. I had to put two transmissions in it during the first 150,000 miles. However the rest of the pickup, including the engine, works good.”
John Deere 610 single depth control
1 Best Buy0 Worst BuysIn Richard’s nearly 40 years of farming, a 1987 Deere 610 27-ft. single depth control chisel plow has “aggravated” him the most. “The first day in the field we couldn’t get it in the ground with 16-in. sweeps on. The dealer told us to put some washers on the top bolt between the sweeps and shank. We did, but then one or both wings would suck into the ground and push up the middle section. Soon the dealer closed his door and our problems were transferred to another Deere dealer. Currently, the chisel works after a fashion, but we still never know what depth it will choose to work at. I am not happy, and never have been, with this machine. In my opinion, Deere should have recalled it and melted it down into plowshares.”
John Deere 6.100
1 Best Buy0 Worst BuysWilliam Strum, Kalona, Iowa: “My 1993 Deere 6.100 2-WD tractor equipped with cab is my best buy. The cab is very comfortable, quiet, and visibility is great. A, B, C, and D ranges shift real well onthe-go, just like a truck. I like the power quad transmission better than the power shift on my 4450, The cab is so quiet 1 can’t hear the engine run, I have to keep my eye on the tach. “My worst buy was the new short block engine I ordered from Ageo for my 1955 Oliver-White tractor. When I unpacked it, it had been shipped in an open plastic bag and was covered with dust and dirt, I complained, but Agco refused to replace it or take it apart and clean it. Instead, they wanted to blow the dirt out with compressed air. Chancing destruction from dust contamination was unacceptable to me. So now I have a tractor with no engine and I can't find a used or rebuilt engine for it.”
John Deere 6105M tractor
1 Best Buy0 Worst Buys“We bought two Deere 6200 tractors (one with a cab and one without) and they are the best investments we’ve ever made. They are reliable workhorses and if they were still available, we’d buy two new ones tomorrow, even if we had to borrow every penny to do it.
“We haven’t been happy with our 2015 Deere 6105M tractor. It’s a shame that Deere made a tractor with such a good engine and transmission yet is still a total lemon due to electrical and radiator design issues. There is a different warning flashing on the dash of this tractor every time we get in it and only one ever turned out to be legitimate. The owner’s manual doesn’t even list a majority of the codes so we can’t even check on what it’s reporting.”
John Deere 6110L 65 hp tractor
1 Best Buy0 Worst BuysRoger nominates his 2000 Deere 6110L 65 hp tractor as his “best buy.” “It’s my only tractor. I use it to do everything on our farm, plus to do custom work. It always starts easy and has a fast hydraulic flow for loader work. It’s also easier to maintain than other tractors I’ve owned in the past. One problem is that the anti-sway blocks and support hang down 1 1/2 in. lower than the drawbar support and catch on rocks and tree stumps, etc. Lock pins on telescopic draft links are almost impossible to use during the winter for mounting a snowblower. I removed them and made my own more simple locks. Another problem is that it’s difficult to see the draw-bar from the tractor seat. Also, I wish it shifted more smoothly.”
John Deere 6110 MFWD tractor
1 Best Buy0 Worst Buys“It’s the all-around best pickup I’ve ever owned,” says Gerrit about his 1999 Dodge Ram 2500 powered by a Cummins diesel engine. “Its slow speed torque is awesome. It’s an excellent towing vehicle.
“I’m also impressed with the Deere 6110 MFWD tractor I purchased a year ago.”
John Deere 6115 90 hp loader tractor
0 Best Buys1 Worst Buy“I like my Sears Craftsman 675E 22-in. wheeled string trimmer. It uses 1/4-in. string that lasts a long time. I use this trimmer to cut 2 to 3-ft. tall weeds around corrals and my barns. It also works well along roadside culverts where I can’t mow with my tractor.
“My 2011 Deere 6115 90 hp loader tractor was underpowered, and tipsy with a loaded bucket. The stick shift transmission, with 3 ranges and 3 gears, was awkward to use. It seemed like I had to shift all the time to match my speed to the job. Also, there was no remote button on the fender to operate the 3-pt. hitch. On the plus side, the tractor was easy on fuel and the loader worked fast. I could use a lever to hook or unhook all 6 loader hoses at once, which I really liked, and the reverser on the steering column also worked well. Now I own a Deere 6430 tractor, which I like.”
John Deere 6120 tractor
1 Best Buy0 Worst Buys“It has a lot of power and handles well,” says Robert about the Deere 6120 tractor he bought used. “We use it for spraying crops, hauling wagons, pulling a 30-ft. roller, and numerous other jobs.”
John Deere 6130
0 Best Buys1 Worst Buy“I love my 2018 Kubota M7040 with a premium cab. It’s amazing how long it lasts on a tank of fuel. We use it for everything on our 40-acre farm.
“My 2018 Deere 6130 has nothing but problems: A/C leaking, little oil leaks, and hoses being overheated and damaged by being close to the muffler/exhaust. The dealer is all talk but no action. So, I plan to buy a 200 hp. Cat challenger soon.”
John Deere 6140 D
1 Best Buy0 Worst Buys“My Deere 6140 D wasn’t a good loader tractor because I could never shift the transmission into a workable gear. I used this tractor for only one year before trading it in for a Deere 6150 M, which has a great transmission and is a good all-around loader tractor.”
John Deere 6150M loader tractor shifts
1 Best Buy0 Worst Buys“Our 2014 Deere 6150M loader tractor shifts smoothly and is operator friendly.”
John Deere 6150R tractor
1 Best Buy0 Worst Buys“My Deere 6150R tractor is a pleasure to operate. It had an electrical problem but the dealer promptly took care of it.”
John Deere 6170M MFWD tractor equipped
1 Best Buy0 Worst BuysA 2013 Deere 6170M MFWD tractor equipped with a Deere 380SL front-end loader rates as Bob’s “best buy”. “Deere’s M series tractors provide everything needed for a livestock operation. You don’t have to pay for technology that’s used only in row crop operations. That results in huge cost savings. The weight distribution of this tractor-loader combination is superior, and the Power Quad transmission with reverse makes feeding chores an easy job.”
John Deere 6170R tractor
1 Best Buy0 Worst Buys“It rides and drives better than any pickup I’ve ever owned,” says Amos about his 2019 Dodge Ram 1500 crewcab equipped with a 5.7-liter, V-8 engine. “The interior is roomy and comfortable, and the V-8 engine is fuel efficient.
“My Deere 6170R tractor, which I bought used, handles great and has good hydraulics.”
John Deere 619
0 Best Buys1 Worst BuyCurt Neyens, Minneota, Minn.: “The rebuilt Deere 619 engine block I bought for my 1984 8650 4-WD tractor is absolutely my worst buy in 25 years of farming. I bought the rebuilt engine block with a oneyear limited warranty last October from Truck and Tractor Parts (TTP) Inc., Warsaw, Ind, It cost me $4,972. When we got it, we made sure it was installed properly by a reputable local repair shop that did the job for $2,500. When we got it to the field, the engine blew a head gasket after 84 hours. We had the fuel pump tested, as TTP requested, and found it was operating at specs. We took our tractor back to the local shop and they repaired it for $1,200, a bill TTP agreed to pay. We took it back to the field, and the engine blew another head gasket after only 12 hours of use. This time, we pulled the engine and took it back to TTP in Indiana at our own expense. They gave us another block. We had that put in for $1,026, and got the tractor back just before last Christmas. We'd put about 220 hours on it when it blew a third head gasket in August. “TTP offered to fix or replace the engine block a third time but that meant going through all the hassles we had the second time, and again at our expense. They also offered me $3,000 cash for it but I’ve already sunk $12,000 into this block including a tractor I rented for 84 hours at $42 an hour last fall to finish harvest. So, instead of throwing good money after bad, I'm having a new Deere engine put in. That'll cost $14,000, but will still be better than having to continue to argue with TTP over their rebuilt Deere engine block.”
John Deere 6190R tractor
0 Best Buys1 Worst Buy“Right from the start I had problems with my Deere 6190R tractor, and most of them never ended. Very disappointing for a Deere. I finally traded for an IH Magnum.”
John Deere 6200 L MFWD tractor
0 Best Buys1 Worst Buy“It’s the most comfortable tractor to operate that I’ve ever owned,” says Gerrit about his 1997 Deere 6200 L MFWD tractor. “It developed one small oil leak as a result of improper installation of the O ring between the oil pump and housing. The dealer promptly took care of it.” On the “worst buy” side, he lists his 1995 Dodge Ram 2500 pickup equipped with a Cummins diesel engine and automatic transmission. “At 49,000 miles the transmission had to be overhauled. The company said they ‘might’ cover ‘part’ of the cost if the dealer determined that the problem developed as a result of defective workmanship or material. I ended up taking it to a local mechanic who charged me about a third as much as the dealer would have. My next truck will have a manual transmission.”
John Deere 6200 MFWD tractor equipped
1 Best Buy0 Worst Buys“My best buy is my Deere 6200 MFWD tractor equipped with a cab and 640SL front-end loader. I bought it used about 5 years ago. It was an early model and has had a few minor problems which my dealer took care of. The company also has made some updates on this tractor. The loader works flawlessly. I like the loader’s self-leveling feature and the quick change attachments for it. Overall, I give the tractor a ‘very good’ rating and the loader an ‘excellent’ rating.
“My worst buys are ‘look alike’ vise grips, most of which have been pure junk. From now on I’ll buy only genuine ‘Vise-Grips’. I’ve bought a few tools made in China or Taiwan that were okay, but most of them aren’t as good as the well-known brand names.”
John Deere 6210 tractor
1 Best Buy0 Worst Buys“My best buy ever is a Krone 3-pt. spinner rake. It’s equipped with tandem wheels that ride over the fields quietly, and because it’s 3-pt. mounted I can quickly move the rake from field to field. Last year I bought a Krone 3-pt. disc mower equipped with finger crushers, which I also like. I had been using New Holland mowers for a long time and didn’t realize there was a better brand on the market
“I recently purchased my second Deere 6210 tractor and really like it. Both 6210’s have been trouble-free.”
John Deere 6210 2-WD tractor equipped
1 Best Buy0 Worst Buys“Our best buy is a 1999 Deere 6210 2-WD tractor equipped with a Power Quad transmission. It starts great in cold weather, has a lot of traction, and has plenty of power to get through tough spots.
“Our 1974 Deere 4430 tractor is also a best buy. It has more than 8,200 hours on it but just keeps running. Like they say, ‘Nothing runs like a Deere.’”
John Deere 6210 4-WD tractor equipped
1 Best Buy0 Worst Buys“I’m well satisfied with my 2002 Deere 6210 4-WD tractor equipped with a Power Quad transmission and cab. It’s a quiet, stable tractor with powerful hydraulics, and I really like the Power Quad transmission. The cab offers good visibility, and the air ride seat and two-way adjustable steering wheel make it comfortable to operate. In my opinion, it would be difficult to improve this tractor.”
John Deere 6210 MFWD tractor equipped
1 Best Buy0 Worst BuysA Deere 6210 MFWD tractor equipped with a cab and front-end loader rates as Zane’s “best buy”. “It has a comfortable cab and convenient and responsive hydraulics.
“Our Deere 7200 tractor also has a comfortable cab. It’s equipped with a Power Quad transmission which works especially well with our big round baler.”
John Deere 622 5-wheeler
1 Best Buy0 Worst BuysGrant Nyhus, Mt. Horeb, Wis.: Grant’s 1989 Deere 622 5-wheeler is a best buy. “I've never been more satisfied with a product.” He says his Deere 2755 4-WD tractor works alright but it could use a better seat. “Another thing that drives us crazy is learning how to back up implements with it, With this type of front axle, the back goes the wrong way.” His Kverneland PC rollover plow equipped with automatic reset “does a perfect job even in rocky soil and heavy clay.”
John Deere 622 AMT heads
1 Best Buy0 Worst BuysJohn Wildermuth, Geneseo, Ill.: A 1990 Deere 622 AMT heads John’s “best buy” list. “It works great for many errands and is especially handy for checking hogs farrowed out on pasture, Lets me drive right by the houses and look in tosee if the sows have farrowed. Works well in mud and will even go on top of snowdrifts. It’s very comfortable to ride and it’s easy to step on and off, I also use it to do clean up work in the farrowing pasture.” On the negative side, John’s unhappy witha fiberglass sawblade called the HandiDisc sold by Sears. “It’s supposed to cut wood, metal, cement, etc,, without wearing out. However, it didn’t even work well on plywood and wouldn't hold its shape or cut straight.”
John Deere 625i Gator
1 Best Buy1 Worst Buy“I like my Deere 625i Gator, which I use every day. However, at first I had trouble with the engine. The dealer kept changing spark plugs trying to solve the problem. Then after the warranty expired 3 years ago, I started using a hotter spark plug and now my Gator runs great. However, now there are holes in the exhaust pipe and a new exhaust would cost more than $500, not including labor. The company did send me a card that’s good for up to a $100 discount on a single replacement part.”
John Deere 626 5-wheeler
1 Best Buy0 Worst BuysTimothy’s happy with his 1992 Deere 626 5-wheeler which he bought used. “It’s easy to maintain and drive as it has only forward and reverse gears. It always starts, is very stable, handles well, and has a bed that dumps for easy unloading. It pulls our small utility trailer with ease. One weak point is that it should have better brakes.
“We had problems starting our McCullough 610 chain saw. Whenever we did get it started and turned it on its side, it would stop. Another problem was that the oiler never worked. I traded it in for a Poulan which is the best saw I’ve ever owned.”
John Deere 6300 75 hp tractor
1 Best Buy0 Worst BuysElmer uses his 1996 Deere 6300 75 hp tractor to power his Schulte 9600 snowblower. “The tractor has more than 15,500 hrs. on it and has been repainted and had a minor tuneup; otherwise, it’s still original. It still runs good, doesn’t use oil, and starts great in cold weather. The snowblower cuts through 4-ft. high snowdrifts with no problems. Schulte snowblowers are next to indestructible.”
John Deere 6310 tractor
1 Best Buy0 Worst Buys“My 1999 Deere 925 mower conditioner is my best buy. I especially like the flail conditioner, which can pass objects through without damaging the machine. This machine just mows and mows without problems. It has held up well over thousands of acres.
“My 1966 Deere 4020 tractor is a best buy. It rarely has problems and is worth exactly what I paid for it six years ago.
“My 1999 Deere 6310 tractor is comfortable, quiet, and does a good job of handling our mower and round baler. The power quad transmission lets us work fast in the field. It lets me mow our field 30 minutes quicker than with my 4020, just because of its ability to easily and constantly change gears.
“My 2003 Vermeer 605XL baler makes a good bale and the pickup gets all the hay. However, it has had a lot of problems.
“My 2004 Vermeer WRX rake does a good job and is easy to adjust. However, it’s four real tires, a good paint job, and some better-grade bolts away from being a best buy.
“My Deere 1600 hydraswing mower conditioner never made it through a field without breaking down. The final blow came when we couldn’t get it unhooked from the tractor’s pto shaft, and we ended up having to take the pto shaft out of the tractor.”
John Deere 6310 MFWD tractor equipped
1 Best Buy0 Worst Buys“My 1998 Deere 6310 MFWD tractor equipped with a cab and Deere 640 front-end loader is my best buy. Both the tractor and the loader have been trouble-free. The cab is really comfortable. Overall this tractor is a pleasure to drive.”
John Deere 637 26 1/2-ft disk
0 Best Buys1 Worst Buy“My worst buy is a Deere 637 26 1/2-ft. disk that I bought new three years ago. I traded away an International 490 for it. It didn’t work right so the dealer sent a man out who worked on it all day to no avail. It still didn’t do a decent job of disking so the company sent out a trouble shooter. Unfortunately, I knew more than he did. So a year later Deere sent out two engineers from the factory. They were on the cell phone all the time they were working on it. They thought they had it fixed, but after they left it still didn’t do a decent job of disking. This disk has a 3-bar harrow on back that’s so unbalanced it eventually caused two bolts in my tractor drawbar to break. The engineers told me this disk was designed on a computer. I’ve now purchased a Sunflower disk that works great. My dealer told me the company won’t do anything else to help out.”
John Deere 6400 2-WD tractor equipped
0 Best Buys1 Worst Buy“My Bush Hog 4610 15-ft. mower is my best buy. I’ve worked it hard but it just keeps on going. “My 1995 Deere 6400 2-WD tractor equipped with a front-end loader is my worst buy. I’ve had problems with the hydraulics, steering, clutch, etc. This tractor has cost me more money on repairs than it could ever make back in the field.”
John Deere 6400L MFWD tractor equipped
1 Best Buy0 Worst Buys“I like my New Holland 166 windrow inverter. It turns hay over more uniformly than a rake which allows the damp underside of the windrow to dry rapidly. Last year we had a lot of wet weather and without the inverter I would’ve had a hard time putting up any dry hay. Another advantage is that it’s gentle on hay which results in less leaf loss than you get with a rake. I recommend purchasing the optional second gauge wheel. “I purchased a Deere 6400L MFWD tractor equipped with a front-end loader last year. I’m quite happy with it although it’s “MyDeLaval feed cart has saved many hours of feeding time and allows increased frequency of feeding which improves cow performance, primarily in butterfat test. However, it has broken down too often and it isn’t easy to work on. Also, parts for it are expensive.”
John Deere 6405 85 hp
1 Best Buy0 Worst Buys“I’ve had good luck with my 2002 Deere 6405 85 hp MFWD tractor equipped with a 640 front-end loader with bucket and bale spear. This tractor has about 2,300 hours on it and has made about 12,000 round bales with a New Holland 664 baler. No major problems. A small oil leak developed in the oil filter line and there was a problem with the air conditioning compressor, but the dealer promptly fixed everything under warranty. The tractor is equipped with a 3-speed transmission with 4 ranges so it can go from 1/2 mph to 18 1/2 mph.”
John Deere 6410 tractor equipped
1 Best Buy0 Worst Buys“It has a lot of power for its size and handles well in tight spots,” says Dale, impressed with his 2001 Deere 6410 tractor equipped with a 640 front-end loader. “I had some problems with the hydraulic and injection pumps, but Deere repaired them under warranty.”
John Deere 6415
1 Best Buy0 Worst Buys“Back in 1983 we bought a Frederick Geo Source heat pump which is our best buy. Climate Masters has purchased the manufacturing rights (ph 405 745-6000; www.climate master.com). This unit was easy to install and has lowered our heating and cooling bills. It’s hooked up to our well. We use the dump water for cattle and to water landscaping plants. We trenched 6 ft. deep from the well to the pump in order to keep the incoming water at a stable temperature. It has required only minor repairs over the years.
“Our 2006 Deere 6415 is a good tractor except that it has a flimsy and poorly engineered quick release on the lower 3-pt. lift arms. We can’t use a quick hitch on the tractor because our turf equipment requires a pto-driven hydraulic pump. I understand Deere has used this 3-pt. design for a long time, but there are easier-to-use systems on the market. Get a clue, Deere.”
John Deere 6415 MFWD tractor equipped
1 Best Buy0 Worst BuysRay’s the satisfied owner of a 2007 Deere 6415 MFWD tractor equipped with cab. “This size tractor really fits our needs for both loader work and field work. It has some features found on high-end tractors but without all the electronics. The 4-cyl. engine has power and is easy on fuel. We installed Euro-style fender extensions so the windows always stay clean.”
John Deere 6420 4-WD tractor equipped
1 Best Buy0 Worst Buys“My 2006 Deere 6420 4-WD tractor equipped with a 640 front-end loader has been trouble-free. The loader bucket and the bale spear change easily. The tractor has a small turning radius so it’s easy to maneuver in tight areas. The 4-WD lets it go through deep snow to get round bales to my cattle. I did have some problems with the cab door gaskets freezing to the door frames, but I solved that problem by wiping anti-freeze on the gaskets and frames. A small amount is all it takes.
“My 2006 Chevrolet Impala SS has had a lot of minor mechanical problems. The V-8 engine has a lot of power, but the fuel economy is just okay at 22 to 24 mpg. The 4 to 8-cyl. switching option seems to make very little difference in fuel economy. The engine uses oil, and with about 125,000 miles on the car I’m already on the fourth set of tires. I’ve been told this is a problem with all the SS models. I wish this car worked as good as my 1996 Chrysler Concorde, which has more than 200,000 miles on it.”
John Deere 6430 4-WD loader tractor
1 Best Buy0 Worst Buys“I like my 2013 Claas 340 Rotocut round baler. I’ve used Claas round balers for years. Last year, when I was ready to update, I bought a Deere 458 Silage Special because I read that was the way to go. I made 748 bales with it. This baler was so inferior in bale quality and operator ease. I took quite a financial hit to get out of it and bought the new Claas. Now I never have to get off the tractor for any problems.”
On the minus side, he lists his 2011 Deere 6430 4-WD loader tractor with cab. “The dealer told me this tractor would outperform the 110 hp, 6-cyl. model I already owned. However, it was sluggish on the road, weak in the field, and burned 6 to 7 1/2 gal. of fuel per hour. The dealer made numerous repairs to the tractor, but after 600 hrs. I wasn’t satisfied. He gave me a decent trade on a new Deere 7330 tractor, which I do like.”
John Deere 6430 Premium IVT tractor
1 Best Buy0 Worst BuysRandy’s impressed with his Deere 6430 Premium IVT tractor. “When going down the road the tractor automatically drops the engine rpm’s while maintaining a constant speed. It saves a lot of fuel.
“My Case IH 125 Maxxum Economy tractor had slow hydraulics to start with, and the clutch wouldn’t ‘feather’ when hooking up implements. I had this tractor in the shop twice under warranty. When the warranty expired the tractor went off down the road, never to return.”
John Deere 6500 L tractor
1 Best Buy0 Worst Buys“Our 1995 Deere 6500 L tractor has a lot of power, good hydraulics, and adeqauate traction. Best of all, the engine has amazing torque and power. It’s the most fuel efficient tractor we own. My only complaint is that the operator station could be improved in design and layout.
John Deere 650 3-pt
1 Best Buy0 Worst Buys“My 1977 Deere 2240 tractor equipped with a 145 frontend loader is my best buy. It has required only one new fan belt and new batteries.
“Other best buys include my 1989 Lely 205 5-disc mower, 1994 Hesston 540 round baler, 1977 Kuhn 14-ft. pull-type hay tedder, and Deere 650 3-pt. side delivery hay rake.”
John Deere 66 riding mower
0 Best Buys1 Worst BuyRobert Fehr, Hague, Sask.: “It gets 35 mpg on short trips and up to45 mpg on long trips. I like how it heats up good in the winter and it also handles well on gravel roads,” says Robert, pleased owner of a 1982 Plymouth Horizon that’s equipped with a 1.7-liter Volkswagen engine. “My Deere 66 riding mower is a worst buy. I used it to cut grass for only half an hour before I had to work on it for five o hours, The engine is very poor. A Honda engine would last five times as long. “Our 1990 Universal 850 tractor is also a worst buy. It has only 70 hours of use, but already we've repaired it about 10 times, Every time we use it we wonder what will break next, We've had trouble with the fuel pump, injector pump, rpm gauge, and rear tire. The hydraulic cylinder on the front-end loader broke three times and the front tire fell off while we were driving on the road, It requires far more work to keep it going than any other tractor we've owned. The cab is very noisy. It costs only about half as much as a Deere tractor, but it isn’t worth one tenth as much.” John Avila, Hanford, Calif.; John says his 1991 Dodge 3/4-ton pickup equipped with a Cummins diesel engine and a 5speed transmission with overdrive rates asa “best buy”. “L use it to pull a 26-ft. travel trailer. It has plenty of power and gets 16 mpg. I get 26 mpg on the highway with the truck alone.” On the negative side, “My 1989 Dodge Ramcharger, which is equipped with a 360 cu, in, fuel injected gas engine, gets only 8 mpg and doesn't have enough power to pull “Every time we use it we wonder what will break next.” my travel trailer.”
John Deere 660
1 Best Buy0 Worst BuysJames E, Evans, Scotland, Ark.: James is impressed with his 1995 Deere 660 rototiller. “It has replaceable parts and the grease fittings are easily accessible, It operates smooth and aerates the soil well while digging 8 in, deep. I had great-looking vegetables in my garden this year.”
John Deere 6601
1 Best Buy0 Worst BuysDoug White, Unity, Sask.: “My 1993 Yardman 12 hp,4-whceel steer riding mower is my best buy. I use it to trim areas where my big mower can’t go. It’s one of the best mowers I've ever used. It cuts tall grass in one pass, is easy on fuel, and tums short, which really helps in tight corners. “I think my 1977 Deutz 100-06 is the best tractor ever built. I’ve owned nine Deutz tractors over the years but none have been as good as this one. It has 7,000 hours on itand has missed only a half day of work since I bought it. I use it with a Deere 6601 pulltype combine. A Deere representative told me the combine was designed to be pulled by a 140 hp tractor and that a 100 hp tractor wouldn't have enough power, but he was wrong. It has only a 104 hp pto rating but is well-matched tothe combine. I’ve harvested up to 400 bu. of barley per hour, Ituses only 3 gal. per hour even pulling the largest loads. They should start building this tractor again.”
John Deere 6603
1 Best Buy0 Worst Buys“My Reese Maxi twin drum mower, which I bought used, mows as fast as I can stay on the tractor seat without plugging up. It’ll mow grass from 6 in. high to 4 ft. high with ease.
“My 2006 Deere 6603 and 2007 Deere 6403 MFWD tractors are both easy on fuel. They let me plant beans with a 15-ft. 1560 drill on one quart of diesel per acre. These are ‘value’ tractors - no electronics means no trouble.”
John Deere 6675 skid loader equipped
1 Best Buy0 Worst BuysA Deere 6675 skid loader equipped with a Yanmar engine rates as Reuben’s “best buy”. “It has about 20,000 hrs. on it with no major problems, and always starts even in the coldest weather. All I’ve replaced are the starter, battery, and parking brake. I wish they still made equipment as tough as this. It was built by New Holland to Deere specs.
“We have 15 different Chevy vehicles including vans, pickups, and semi trucks. We also own Dodge trucks. We do most of our own repair work and avoid buying Chinese-made or rebuilt products from auto stores such as O’Reillys, Autozone, and Advance Auto. That includes pumps, steering, and brake components. However, we do still buy starters and alternators from NAPA stores.”
John Deere 6700 self-propelled sprayer
1 Best Buy0 Worst Buys“Two years ago I bought a used 2009 Deere 6700 self-propelled sprayer, and I really like how it rides and operates in the field.
“I bought two 2012 Honda Rancher 4-wheelers with camo paint to use in my agritourism business. The company charges about $400 extra for the camo paint color. Within 2 years the paint started peeling off both machines, but the company won’t take responsibility and fix the problem.”
John Deere 6715 4-WD tractor equipped
1 Best Buy0 Worst BuysJames nominates his 2004 Deere 6715 4-WD tractor equipped with a 740 Classic loader and grapple fork as his “best buy”. “This is the first new loader tractor I’ve ever bought. I use it with a Haybuster bale processor to feed cows, and with a New Holland 788 round baler. It’s one of the most comfortable tractors I’ve ever operated. It has a heated cab which is really nice in winter.”
John Deere 68
1 Best Buy0 Worst BuysKenneth Sayre, Edgerton, Wis.: ‘It starts easily, mows almost anything and cuts grass evenly. It will mow small willows up to 3 ft. tall,”’ says Ken, happy with his John Deere 68 riding lawn mower.
John Deere 6920S IVT tractor
1 Best Buy0 Worst Buys“My New Holland BB940A large square baler is a best buy. It has made more than 100,000 bales and is still going strong. My former boss had two identical balers which are also at around 100,000 bales and still going.
“Another best buy is my Deere 6920S IVT tractor which I use to run the NH baler. It has almost 18,000 hrs. and we haven’t touched the engine. The transmission was rebuilt at about 14,000 hrs. This tractor is tough as nails.”
John Deere 6R 195
1 Best Buy0 Worst BuysEd’s best buy is a 2010 Deere 9630T tracked tractor. “All I’ve done to it is replace a fan hub drive and one set of tracks. It’s approaching 11,000 hrs.”
Ed isn’t as happy with his 2011 Deere 6R 195. “I had nothing but overheating problems. The dealer did everything possible but just couldn’t fix it. I had to get rid of it.”
John Deere 6-WD Gator heads
1 Best Buy0 Worst BuysA 1997 Deere 6-WD Gator heads Kenneth’s list of “best buys”. “Works great for picking up stones in no-till soybeans and lots of other chores around the farm It has a real handy hydraulic dump bed and is built heavy enough to do any kind of chore. It’s also easy for my wife to drive.”
John Deere 6-wheel Gator lets me go
1 Best Buy0 Worst Buys“My Deere 6-wheel Gator lets me go anywhere safely and is a great help for doing chores. If our cows get out they turn around and go home when they see me coming, because they know they can’t outrun my Gator.”
John Deere 6x4 Gator
1 Best Buy0 Worst Buys“My Deere 6x4 Gator has plenty of power and will go in snow, mud or sand. It has comfortable seats, and the dump bed is easy to raise. I’ve just bought a second one.”
John Deere 7000 4-row corn planter
1 Best Buy0 Worst Buys“It does an accurate job of planting in a minimum amount of time,” says Dale, pleased with his Deere 7000 4-row corn planter. “It’s also very reliable. “MyBriggs & Stratton 18 hp twin cylinder engine is my worst buy. The starter gear is made out of plastic and breaks about every three months. The engine doesn’t work well because it has a fixed jet carburetor. I drilled out the jet and added my own adjusting needle. Now it runs okay but only after I went through a lot of grief.”
John Deere 7000 Conservation 6-row planter
1 Best Buy0 Worst BuysBernard Schneider, Chatfield, Ohio: “It's the best planter I could ever buy for the money,” says Bernard, happy with his 1980 “The company won't provide any parts or labor to help the guinea pigs who found the problem.” Deere 7000 Conservation 6-row, 30-in, planter. “Works ¢qually well in no-till, minimum till, or conventional ull and offers excellent seed placement, The narrow noull coulters work great in my heavy clayloam soils. The only change I'd like to sce is more closely spaced gears on the transmission for planting in the 27,000 to 32,000 population range.”
John Deere 7010 tractor
0 Best Buys1 Worst Buy“No problems so far,” says Jared about his 1998 Dodge Ram 2500 4-WD pickup. “It rides excellent - I don’t feel any of the bumps - and has all the power I want. It’s an all-around good pickup.”
His “worst buy” is his 1995 Deere 7010 tractor. “Let’s just say that when Deere says ‘nothing runs like a Deere’, they aren’t kidding because everything else runs.”
John Deere 702 cart-type 10-wheel
0 Best Buys1 Worst BuyBill’s unhappy with his 2003 Deere 702 cart-type, 10-wheel rake. “The problem is that it can’t handle heavy hay. Instead, hay just balls up at the end of the rake. I fought with it for two seasons before I got rid of it and bought a New Holland bar rake. I find that hay bales up so much better with a bar rake than it does with a wheel rake. The company wouldn’t help at all.”
John Deere 702 8-wheel rake
1 Best Buy0 Worst BuysWes is impressed with his 1999 Deere 702 8-wheel rake. “It rakes clean and cuts my raking time in half. In good hay it’ll stay ahead of two round balers. It makes even, fluffy windrows with minimal leaf loss and doesn’t twist and ‘beat’ the hay as much as a rollbar rake does.”
John Deere 704 pull-type 14-wheel
1 Best Buy0 Worst Buys“I’m well satisfied with my 2008 Case IH RBX 563 round baler which is equipped with endless belts, net wrap and a wide pickup. It makes nice bales. We rake two windrows together to make large windrows, and the baler handles them with ease.
“My Deere 704 pull-type, 14-wheel rake does a nice job of raking but is built too light for rough hay ground. Every year the frame breaks in a different spot and has to be reinforced and welded.
“My White 272 35-ft. disk does nice work, but the shafts that the blades are mounted on are only 1 1/8 in. in diameter when they should be at least 1 1/2 in. or more. Last spring I broke eight different shafts.”
John Deere 709 pull-type rotary mower
1 Best Buy0 Worst Buys“I like my 1999 Deere 709 pull-type rotary mower. It does everything well and works great on headlands and pastures. It has a great power train and clutch and is well designed.”
John Deere 714 mulch tiller pulls
1 Best Buy0 Worst Buys“Larry’s the owner of a 1997 Ford F-150 pickup. “No problems after 46,000 miles. This is the first Ford I’ve owned in 22 years, but I wouldn’t hesitate to buy another one. It’s definitely a best buy.”
On the “worst buy” side, “My Deere 714 mulch tiller pulls too hard. I think it would make a better ship anchor.”
John Deere 714 Mulch Tiller
1 Best Buy0 Worst BuysA 1992 Deere 714 Mulch Tiller rates as Dale’s “best buy”. “It goes right through any residue. I put narrow shovels on it whenever I want to leave more residue on the surface. The wide twist shovels do a nice job mixing in field lime.”
John Deere 717 stalk cutter
1 Best Buy0 Worst BuysHarold’s happy with his 1996 Deere 6300 MFWD tractor equipped with a 640 frontend loader. “The cab is easy to get in and out of and keeps me warm during snow removal. It’s a good loader tractor.
“My 1997 Deere 717 stalk cutter works good for mowing weeds and road sides.”
John Deere 7200 12-row planter
1 Best Buy0 Worst BuysAllan Brooks, Markesan, Wis.: Allan's pleased with Martin row cleaners mounted on his Deere 7200 12-row planter (Kentucky Farms Inc., 169 Allegre Rd., Elkton, Kent, 42220 ph 502 265-5817). “They’ve allowed me to significantly reduce tillage operations while providing excellent planter performance. They're built much stronger and designed better than Yetter ‘residue manager’ attachments.”
John Deere 7200 16-row narrow planter
1 Best Buy0 Worst BuysSteve Perkinson, Thawville, Ill.: Steve mounted 1991 Martin row cleaners on his Deere 7200 16-row narrow planter and says they’re a “best buy”. “They do an excellent job of clearing strips in no-till conditions, especially corn stalks. However, on con ventionally tilled fields they gouge the soil because there’s not enough upward adjustment. I plan to remount them so I can raise them up more.”
John Deere 7200 2-WD tractor
1 Best Buy0 Worst Buys“Our Deere 7200 2-WD tractor is a handy, easy-to-drive tractor. It has a lot of power and runs quiet. However, the air conditioning doesn’t get cool enough and the cab air filters are difficult to service.
“Our children really enjoy using our Walker 56-in. zero turn riding mower with a 16 hp engine. It cuts mowing time in half with very little trimming needed afterward.”
John Deere 72008-row
0 Best Buys1 Worst BuyGary Joachim, Claremont, Minn.: “My best buys are the Osborne hog feeders that I installed in my confinement buildings (Osborne Industries Inc., Box 388, Osborne, Kan. 67473). There’s hardly any waste, they never plug up, and require almost no adjustments. I haven't spent one minute cleaning manure out of them. The only problem is that once in a while a small pig will crawl in and get caught. “My Deere 72008-row planterisn'treally a lemon, but in real wet conditions like we had last spring wet clods stick on the idlers causing the chains to fall off the row units. My neighbor had the same problem. Also, most of the dry fertilizer tubes rusted away after the first year. My old International 400 planter had a much better dry fertilizer hose assembly, I like the spring-loaded idler on the seed and fertilizer transmissions. CaseTH planters have used similar idlers for almost 20 years.”
John Deere 7200 Quadra Trac tractor equipped
1 Best Buy0 Worst Buys“I like my 1994 Deere 7200 Quadra Trac tractor equipped with a bucket loader and grapple fork. Before buying this tractor I always dreaded doing morning chores because I froze to death. The heated cab and the great view it offers is really wonderful. “My Bow-Matic milking machines are my worst buy. When I bought them I didn’t realize that it would cost $750 to $850 to change the silicon inflations on eight machines. Another problem is that they’re difficult to change and I had to hire the dealer to do the job.”
John Deere 720A zero turn riding
1 Best Buy0 Worst BuysDouglas nominates his 2008 Deere 1590 15-ft. no-till grain drill as his “best buy”. “It does a good job and is easy to pull. I had to make a drawbar support for my Deere 2955 tractor because the drill is equipped with a straight hitch. Otherwise, the tractor has no trouble handling the drill.
“I’m well pleased with my Deere 720A zero turn riding mower.”
John Deere 726 mulch finisher
0 Best Buys1 Worst Buy“One of my worst buys ever was a Deere 726 mulch finisher. The drawbars that hold the baskets and spike tooth assembly on the back were built wrong at the factory. The dealer told me to buy some steel plate and make some shims because the company didn’t have the correct parts even after the machine was in production a year. Another problem is that the hydraulic lock-up will not hold the machine up.”
John Deere 726 Soil Finisher
1 Best Buy0 Worst Buys“My 1998 Deere 726 Soil Finisher makes an excellent seedbed and is a best buy.
“My 1998 Deere 510 disc ripper does a super job of cutting stalks and breaking up hard pan.
“My 1998 Deere 9410 combine is an all-around excellent machine with wonderful operator comfort.”
John Deere 727A mid-mount zero-turn
1 Best Buy0 Worst Buys“The 2004 Deere 727A mid-mount, zero-turn riding mower I bought used 2 years ago runs great and turns on a dime, and the grass catcher does a great job of picking up leaves. This mower is fuel efficient and always starts right up.”
John Deere 7300 12RN finger pickup planter
1 Best Buy0 Worst BuysRandy Dertwich, Pilger, Neb.: “It flexes extremely well for a 12-row mounted planter,” says Randy, whose 1989 Deere 7300 12RN finger pickup planter has nevertheless had some problems. “It’s extremely difficult to get a good mark from the markers in high residue in our irrigated corn fields. added weights onto the markers, but further work needs to be done. Possibly the markers should be equipped with double discs.”
John Deere 740
1 Best Buy0 Worst BuysGehring Farms, Inc., Hartford, Wis.: They're pleased with 1991 Deere 740 and 720 wagon gears mounted under forage and gravity wagon boxes. “They trail true even at highway speeds over 35 miles per hour and handle heavy loads with ease. Our 1989 Deere forage box requires no maintenance and is easy to operate. Our two older 716 boxes have worked very well for the past 10 years and are still running.”
John Deere 7410 MFWD tractor
1 Best Buy0 Worst Buys“I bought my Deere 7410 MFWD tractor used two years ago and it has been trouble-free. It has a lot of power and is comfortable to drive. It’s also fuel efficient.”
John Deere 7420 tractor
1 Best Buy0 Worst BuysJeff’s generally satisfied with his 2003 Deere 7420 tractor. “It has a lot of comfort and power and handles well. However, the paint job isn’t very good.”
John Deere 750 2-WD tractor
1 Best Buy0 Worst Buys“I like my 1985 Deere 750 2-WD tractor. It’s made by Yanmar. This tractor has a lot of power, a strong lift, and handles good. It’s also easy to trailer. I use it with a 72-in. grooming mower, 4-ft. Bush Hog, 4-ft. box blade, angle blade, scoop, post hole digger, and 3-pt. sprayer to control weeds along fence lines. Fuel economy is excellent.”
John Deere 750 4-WD tractor 5
1 Best Buy0 Worst BuysAlan bought a used Deere 750 4-WD tractor 5 years ago. “We run a small produce operation and use our 750 a lot to rototill, cultivate, plant potatoes, hill corn and beans, etc. We even modified an old horse-drawn digger to mount on the tractor’s 3-pt. hitch. This tractor has never let us down. It’s the perfect size for one-row-at-a-time farming.
“It’s impossible to control seed depth placement with my Covington planter, which leads to spotty emergence of plants. We’ve tried everything we can think of to solve the problem but with no success, so we replaced it with an Earthway push planter. We’re more than willing to sell the Covington planter at an attractive price.”
John Deere 7510 MFWD tractor equipped
1 Best Buy0 Worst BuysRoger’s impressed with his 2000 Deere 7510 MFWD tractor equipped with a 740 front-end loader. “The Power Quad transmission is very user friendly, especially for loader work. The engine is fuel efficient and the cab is very quiet.
“My 2001 Ford Super Duty F-250 4-WD pickup equipped with a Power Stroke diesel engine is a best buy. It’s fuel efficient and has excellent power.”
John Deere 752 no-till grain drill
1 Best Buy0 Worst BuysJeff Frey, Willow Street, Penn.: “My 1989 Deere 752 no-till grain drill offers very good depth control and is easy to adjust. It’s a well-designed machine.”
John Deere 7520 MFWD tractor equipped
1 Best Buy0 Worst BuysBob’s the proud owner of a Deere 7520 MFWD tractor equipped with a Deere 741 self-leveling loader with joystick. “This tractor is equipped with a Power Quad 20-speed transmission with a left hand shuttle, which is a delight to operate. We use it every day in our livestock operation with no problems. It’s our first MFWD loader tractor, and I’d find it difficult to part with.”
John Deere 755 MFWD tractor
1 Best Buy0 Worst Buys“My Deere 755 MFWD tractor is my best buy. I use it with a backhoe, front-end loader and finish mower. It works right up hills so steep I can’t even walk up them. The dual range hydrostatic MFWD makes this tractor a pleasure to use.”
John Deere 7600 2-WD tractor equipped
1 Best Buy0 Worst BuysL.J. Balzer, Hooker, Okla.: He’s had trouble with Pella windows. “They leak so that after every rain our floors are flooded. The mechanisms that open and close the windows wore out after being used only a few times. Apparently the worm drives are made from material that’s too soft. After spending thousands of dollars for remodeling and then installing these windows, all we have is a mess, We don’t recommend them to anyone.” Gene Janssen, Barnesville, Minn; “Our 1993 Deere 7600 2-WD tractor equipped with a Power Quad transmission is our best buy. It has a quiet, roomy cab with convenientcontrols, The remote 3-pt. control switch outside the cab is handy and the transmission works greal. “Our 1984 Soil Mover 7-yard scraper is a worst buy. It’s a good scraper, but the hydraulic cylinders are held together with snap rings that are pure junk and cost too much. I had a hydraulic repair service make new rings for one third the company price.”
John Deere 7610 MFWD tractor
1 Best Buy0 Worst BuysMark nominates his 1997 Deere 7610 MFWD tractor as his “best buy”. “It has a quiet cab, is easy on fuel, and pulls well for a 115 hp tractor. It has high capacity hydraulics and is a good all-around tractor for our row crop operation. It replaced a Deere 4240 which lasted 10,000 hours and was also a best buy.”
John Deere 770 4-WD
1 Best Buy0 Worst Buys“Our ‘new to us’ 1998 John Deere 770 4-WD is an amazing little tractor. We bought it with 1,100 hours and it looks and runs like new. It has 24 of the best horses available.”
John Deere 7710 tractor
1 Best Buy0 Worst Buys“My Deere 7710 tractor has 1,750 hours on it but has been in the dealer’s shop for repairs to a ‘blown-out transmission case’. It has been there for four weeks and they aren’t finished with it yet. The repair bill will be more than $10,000.
“The problem is the same as described by Dan Kibbe of Waterford, Penn., in FARM SHOW’S Vol. 32, no. 2. When I read about Kibbe’s ‘worst buy’ just two weeks prior to my ‘blown-out transmission’, I thought, ‘Oh oh. My tractor has the same symptoms’. It would go into park and into gear at the same time. And sure enough, the side literally blew off the transmission case.
“Last January the mechanic who’s working on my tractor also fixed a Deere 7610 tractor equipped with the same 19-speed powershift transmission. It had 1,700 hours. Like on my tractor, it blew the side off the www.howard transmission. The mechanic said the transmission linkage wears so when it’s shifted into park, it’s still in first gear. My advice to owners of Deere tractors equipped with 19-speed powershift transmissions is, watch out.”
John Deere 7710 2-WD tractor equipped
0 Best Buys1 Worst Buy“Our worst buy ever was a new Deere 7710 2-WD tractor equipped with a powershift transmission. There was trouble from day one with the electronics, but the biggest problem was with the transmission. It would go into park and into a gear at the same time. The dealer said they couldn’t do anything until it broke.
“After the warranty had expired, one side of the transmission case finally blew out. Of course, we were stuck with a big repair bill because the company said it was out of warranty, even though the dealer had documented records of all the times he had looked at it. We were still having some problems with the transmission after they fixed it so we traded it off.”
John Deere 7710 4-WD tractor
0 Best Buys1 Worst BuyThomas Macha, Mabel, Minn.: “My Deere 7710 4-WD tractor is fuel efficient. The only problem was when the radiator sprang a leak. Our dealer fixed it right away.”
John Deere 7720 Titan Il combine
1 Best Buy0 Worst BuysGene Larson, Westbrook, Minn.: Gene's disappointed with his 1988 Chevrolet 4-WD pickup. “A lot of little things have gone wrong with it. The seat is uncomfortable and I dislike the radio and heater controls, “My Deere 7720 Titan Il combine is trouble-free and a pleasure to operate.”
John Deere 775 riding mower
1 Best Buy0 Worst Buys“My Deere 775 riding mower always starts right up. We use it a lot but have never spent a dime on it. It does a nice job.”
John Deere 7775 skidsteer loader
1 Best Buy0 Worst Buys“My best buy is my Deere 7775 skidsteer loader. I use it with a tine bucket equipped with a grapple fork, a 7-ft. material bucket, a round bale spear, and a pallet fork. I don’t think there’s anyhing that I can’t do with this loader. I also use it with a 6-ft. snowblower which works great. The only problem is that in the past few years it hasn’t snowed much around here. I have an enclosed cab and heater and fan on the loader so whether it’s summer or winter, I stay warm and dust-free.”
John Deere 7800 2-WD tractor
1 Best Buy0 Worst Buys“My 1995 Deere 7800 2-WD tractor has a quiet cab and plenty of power.”
John Deere 787
1 Best Buy0 Worst Buys“My Deere 787 and 1850 air seeders are both best buys. I can put however many bushels of grain I want in them, set them, and go. The 787 seeder plants very accurately - the monitor tells me if I’m overplanting or underplanting. By watching the monitor I can empty the hopper down to the last 1-gal. pailfull and still be seeding properly. The 1850 seeder is the same as the 750 drill. I can fold it up and be on the road in only about 30 seconds without having to get out of the cab to hook or unhook any pins. “I converted the single wing tires to dual caster wheels to better support the weight of the markers on both ends of the drill. “My Deere 7200 tractor equipped with a 740 front-end loader is a best buy. It’s a great improvement over the Deere 2950 and Farmhand loaders I had been using. It has controls that are easy to reach, and a hydraulic system that works faster and better than the one on my old tractor. Also, the loader is built a lot heavier.”
John Deere 790 4-WD tractor equipped
1 Best Buy0 Worst BuysLawrence is happy with his 2002 Deere 790 4-WD tractor equipped with a front-end loader and backhoe. “This tractor is a real workhorse for its size. We use it for loader work, spreading stones and dirt, picking up firewood, and so forth. No problems.
“In 2001 I bought a new Chevy K 2500 pickup equipped with a heavy duty snowplow, and the pickup was nothing but trouble. The fan clutch had to be replaced due to overheating and it had a lot of electrical problems. Finally, when the muffler baffle broke at 14,000 miles, I had enough and got rid of it. I’m glad I kept my Ford F-150 pickup.”
John Deere 7930 tractor equipped
1 Best Buy0 Worst BuysKen’s the proud owner of a 2007 Deere 7930 tractor equipped with a model 746 front-end loader. “I bought this tractor equipped with Infinitely Variable Transmission (IVT) and Triple Link Suspension (TLS), a combination that has resulted in the best tractor I’ve ever operated. IVT has to be the best invention ever.
“This tractor is awesome when used with a grain cart, because it matches combine speeds perfectly and is extremely smooth when unloading into trucks. TLS improves the ride, especially with the loader on. The tractor has tremendous hydraulic flow and outstanding power bulge and, with IVT, the fuel usage has been outstanding for a 180 hp tractor. The tractor itself has been trouble-free.”
On the negative side, he lists high pressure hose that he bought at Northern Tool. “The third time I used the hose it started leaking through the seam. When I tried to return the hose the company told me they only warranty pressure hoses for 30 days. It didn’t matter that there was no physical damage to the hose. I find Northern products to be poor quality, and their customer service is even worse.”
John Deere 800
0 Best Buys1 Worst BuyRalph Muecke, Gladstone, N. Dak.: Ralph nominates one Deere hay tool as his best buy and another as his worst. “The Deere 375 round baler I bought in 1993 is well-built. It makes good solid bales, the double twine tie does an outstanding job of tying bales, and the machine will bale anything - even Russian thistles. The only problem is it was terribly overpriced. “My worst buy was a Deere 800 swather, in spite of the fact that it worked and cut well. The problem was that there were way too many moving parts, You had to tear the swather nearly half apart in order to change some of the bearings and belts, causing lots of unnecessary downtime. Also, the roller chains were way too light for their application.”
John Deere 8000
1 Best Buy0 Worst Buys“My 2011 Ford F-150 King Ranch is the quietest, best-riding pickup I’ve ever owned. I love the EcoBoost engine which gets about 19 mpg overall. It has a lot of torque and is like driving a high-speed diesel. On the highway it seems to just keep shoving me in the back, and will go well past 100 mph.
“I like Deere 8000 series tractors. I’ve owned an 8100 MFWD 8400T, 8320 MFWD, and now an 8295R MFWD. These tractors have a lot of power, good fuel economy, super cabs and a level of quality and sophistication second to none.
“I’m also pleased with the Morton buildings we’ve put up – a 54 by 99-ft. model in 1996 and a 54 by 75-ft. model in 2003. These buildings are just as tight and bright today as the day they were built. Super sliding door quality, too. Great service and construction.”
John Deere 8100 MFWD tractor
0 Best Buys1 Worst BuyMarvin’s satisfied with his three Case skid steer loaders. They include two 1845 C models, one made in 1996 and the other in 2000; and a 1999 85 XT. “The 1845 C’s are used extremely hard but we’ve had very few problems with them. They’re both powered by Cummins diesel engines which are virtually trouble-free and start easily in cold weather. Their controls are precise and operator-friendly. The 85 XT works fast and is easy to operate. It will outload many larger end loaders. All these rigs are somewhat hard on tires, however.”
On the “worst buy” side, he lists his 1999 Deere 8100 MFWD tractor. “It’s a nice tractor with an excellent engine. But the armchair controls on this tractor are the pits. Because of their poor design, I’ve come close to getting into serious accidents. The transmission control makes it hard to distinguish between park and reverse. The rocker switches that operate the hydraulics are awful, and the instruments mounted on the side are hard to notice. This would be a nice tractor if it had the controls the company uses on its 7000 series tractors.”
John Deere 8120 MFWD tractor
1 Best Buy0 Worst Buys“My 2005 Ford F-150 4-WD crew cab pickup rides like a car and gets a reasonable 16 mpg.
“I’m also happy with my 2004 Deere 8120 MFWD tractor. It’s fuel efficient and comfortable to drive.”
John Deere 8120T tractor
1 Best Buy0 Worst Buys“We like our Deere 8120T tractor. We use it to plant and spray crops and also to pull our 750-bu. grain cart. This tractor drives and rides like a Cadillac.”
John Deere 820 30 hp tractor
1 Best Buy0 Worst Buys“When I retired from the Air Force in 1970 I bought a new Deere 820 30 hp tractor with a used battery along with a new 3-pt. mounted disk and 5-ft. Deere bush hog. I used this set for more than 16 years and never had a problem with the battery.”
John Deere 8220 Trac tractor
1 Best Buy0 Worst Buys“Our 2005 Deere 8220 Trac tractor has a lot of power and excellent traction. We’ve noticed that soil compaction has been less of a problem ever since we started using it, compared to when we were used our Deere 8210 wheeled tractor which we traded in. I was surprised at how easily this tractor handles in row crops. I enjoyed taking part in Deere’s Gold Key program, which allowed us to be present at the factory in Waterloo, Iowa, and view our tractor being assembled.”
John Deere 825 Gator
1 Best Buy0 Worst Buys“We use our 2015 Deere 825 Gator all the time, including to drive around at antique tractor shows. It’s equally useful for work or play.”
John Deere 825I Gator
0 Best Buys1 Worst Buy“I’m happy with my Kinze 1300 grain cart equipped with tracks and an electronic scale. It operates smoothly going over center pivot irrigation tracks and isn’t top heavy. It also unloads fast and has an accurate scale.
“My 2013 Deere 825I Gator has been in the shop continuously for repairs. The warranty ran out early last year, and since then I’ve spent more than $3,000 on repairs. That doesn’t count all the repair work done while it was still under warranty.
“I like my 2014 Case IH 400 tracked tractor, but the Goodyear tracks haven’t held up very well. They had less than 1,000 hrs. on them at the beginning of last fall but already were in poor shape, with chunks of tread missing. Goodyear says it isn’t their fault, and Case IH will only offer to sell me new tracks at a reduced price.”
John Deere 825i Gator 4-WD utility vehicle
0 Best Buys1 Worst BuyStanley’s had a lot of trouble with his 2010 Deere 825i Gator 4-WD utility vehicle. “We owned a Gator before so when they came out with the new design, we decided to try it. However, we found the new Gator to be poorly designed and cheaply made. We bought it with a cab and heater for about $20,000. Many of the parts on this vehicle are made in China, including the engine,” says Stanley.
“This rig has had one problem after another. The engine’s drive belt slips all the time and makes a screaming sound. The air intake valve fell off one day when my son was driving down the road, and we ended up using my wife’s nylon stocking for a filter. The doors won’t stay closed and the tires were way too thin and already had to be replaced. The treads are hardly worn at all, but the tires are made from thin material that punctures way too easily. And when you do get a flat tire, you have to use a high lift jack to lift the bed 2 ft. up in the air just to change the tire.
“The gear shifter is made from lightweight material and had to be replaced under warranty. Every time I shifted gears, it felt like I was going to bend it. Another problem is the shifter has to be in exactly the right position or the vehicle won’t even start. A buzzer sounds every time the emergency brake is set, which is about the only thing we can count on working.
“The frame of the cab is made from poly with a glass windshield. The dump bed has a metal floor but plastic on the sides and back. One time I tried to pull my kids on a sled behind the vehicle and hooked a chain up to the front of the bed, so it bent back. The hydraulic cylinders on the dump bed are too small and bent right away.
“We were told by the dealer to keep the heater on during the summer just so the vehicle won’t overheat. If we turn the lights on at night, the battery soon runs down. The fuel gauge is located on top of the gas tank, so the driver has to get out of the cab and look under the vehicle just to see how much gas is in the tank.
“The cab was installed several months after we bought the vehicle. When they came out to our farm to install it they only sent one guy, even though the cab is too heavy for one person to lift. He didn’t even bring any tools with him and had to use mine.
“All together we’ve had the vehicle in to the dealer 3 times, and the dealer has come out to our place 3 times. All we use it for is to check on our cows on pasture, to haul 5-gal. buckets of feed with milk bottles for our calves, along with an occasional bale of straw. In my opinion this Gator is made for hobby farmers who just want to cruise around; it isn’t made for hard use. We could have bought a Jeep Wrangler for the money we’ve spent on this machine.
“We’re still making payments on the Gator, and if we weren’t ‘upside down’ on this vehicle we’d sell it in a heartbeat. I think Deere is riding the shirt tails of their reputation and selling disposable green plastic. After this experience we’ll never buy another Deere of any kind.”
John Deere 8300 2-WD tractor
1 Best Buy0 Worst Buys“I like my 1997 Deere 8300 2-WD tractor, which has about 2,700 hours on it. Electric-over-hydraulic controls make it a real pleasure to drive. With my left hand on the steering wheel, all I need is three fingers on the controls to operate it. Talk about comfort farming.”
John Deere 8300 MFWD tractor equipped
1 Best Buy0 Worst Buys“I bought my 1988 Deere 4650 MFWD tractor used with 200 hours on it. It’s my best buy. It now has more than 6,400 hours on it and still runs like new. It has needed only a few minor repairs. I really like the front wheel assist and don’t know how I ever got along without it in the past.
“My 1996 Deere 8300 MFWD tractor equipped with a 200 hp engine and 16-speed Powershift transmission is a best buy. It performs well and has a quiet cab. My only complaint is that it has a lot of electronics and if something goes wrong with that, I can’t fix it at all. I have to call for a service mechanic to trace down the problem and repair it. My father and I have run Deere equipment for over 40 years and really feel that ‘Nothing Runs Like A Deere’.
“My 1993 Ford F-150 4-WD pickup equipped with a 302 cu. in. engine and 4-speed transmission is my worst buy. This pickup has really soured me on Fords. It’s underpowered and gets a horrible 10 mpg without pulling a load. I can’t start out in second gear without having to rev the engine to at least 1,100 rpm’s. Otherwise the engine will kill. I won’t buy another Ford again.”
John Deere 8310 tractor
1 Best Buy0 Worst BuysHe’s had good luck with his 2002 Deere 8310 tractor. “It’s a dream to drive. I bought it out of Arkansas sight unseen after finding it online. It has a lot of power and is fuel efficient. I can work an acre of ground pulling an 18-ft. Krause disk and a packer, while using only a gallon of fuel. It’s a nice piece of equipment.
“My worst piece of equipment is a new Deere 1750 corn planter. The first time we pulled it in the field most of the drive pins on the shafts fell out. Apparently when it was assembled someone didn’t put the cotter pins in place. The dealer went over it and found several loose bolts. During the first 300 acres of planting the drive clutch went out and was replaced under warranty. We then planted another 200 acres before a second clutch went out. This time the dealer wouldn’t replace the clutch under warranty.”
John Deere 8335
1 Best Buy0 Worst Buys“It’s a good all-around tractor that looks nice and is easy to climb onto,” says Gerald about his 2012 Deere 8335. “I use it to apply anhydrous ammonia and to plant corn, and also to move snow with a rear-mounted scoop that can get into tight places. This tractor has plenty of power for both large and small jobs on our farm.”
John Deere 835R Gator
1 Best Buy0 Worst Buys“My 2023 Deere 835R Gator is the best. If I had to give this machine up, I’d be lost. My dealer provides excellent service. I use it every day, and on most days, I don’t even start my pickup anymore. I bought the extended warranty, but with almost 6,000 miles now, it seems I won’t need to use it. Yes, they’re expensive, but they really do replace a pickup truck. I even took it to the Colorado mountains for trail riding. It performed perfectly at high altitudes of 10,000 ft. or more.
“I bought a 2000 Mitsubishi mini truck, thinking it would be a good replacement for a side-by-side UTV on the farm. They’re not. Mine had about 50,000 km (31,069 miles) when I bought it, and I think it was already worn out, or maybe I wore it out. They absolutely won’t stand up to farm use or country roads. They don’t have a good enough air cleaner system.
“I brought it back to the dealer twice to have it overhauled. The dealer stood behind it, but I think he realized it was hopeless, as they aren’t made for this kind of use. The parts are expensive and hard to come by. I finally gave up and sold it on auction, then bought a Deere Gator.”
John Deere 8400T wide track tractor
1 Best Buy0 Worst BuysSteven likes his 1999 Deere 8400T wide track tractor. “This tractor has outstanding flotation, traction, power, and comfort. It’s equipped with tracks spaced 120 in. apart. I like them because they don’t scuff the ground very much when turning. The tracks take a lot of roughness out of the field. Also, steering is so much easier than with my older wheeled tractor. I’ll never go back to a wheeled tractor.”
John Deere 8420 tractors
1 Best Buy0 Worst Buys“We own three Deere 4960 tractors with a total of 8,000 hrs. on them, with very few repairs. These tractors are economical to maintain, and they don’t have any electronic controls to go wrong as on the newer tractors.
“I also own two Deere 8420 tractors and two 8520’s. They all have push button electronic controls, which I think was a big mistake. We’ve had lots of trouble with them. Someone needs to make a good manually-controlled big tractor.”
John Deere 843
1 Best Buy0 Worst BuysLarry Paul, Shickley, Neb.: A 1972 Deere 843 corn head and a 1979 Deere 8820 combine head Larry's list of best buys. “These two old warriors just go and 20. They pick a pretty big crop every year with very little trouble. I only had to stop for 15 minutes for repairs this last year.”
John Deere 8440 tractor
1 Best Buy0 Worst Buys“One of my best buys was a new Deere 8440 tractor. We used it for 30 years before trading for another best buy, a Deere 8320.
“Ford pickups have also been best buys. We have a 1999 7.3 with 320,000 miles that’s still going strong. We also have a 2012 with a 6.7 that’s been a great pickup.”
John Deere 85
0 Best Buys1 Worst BuyHerman Stovall, Kemp, Texas: Herman's best buy is his new Massey Ferguson 396 tractor equipped with a 1000 series 6-cyl. engine. “No bells and whistles here. Just a 12-speed forward, 4-speed reverse transmission, 4-WD, and comfortable cab. Hydraulics have adequate power and speed. It cost $4,500, a lot less expensive than a Deere 85 hp tractor with a 4-cyl. engine.” R. Leigh Catchpaugh, Sherwood Park, Alberta: “My all-time worst buy was the Dodge Dakota pickup I purchased in 1990. Everything went fine until my wife and were visiting in the States about a year ago. The engine began to cut out, so we changed the fuel filter which helped until that evening. When the problem recurred, we began taking it to dealers all over Washington state since the truck had less than 49,000 miles on it and was still under warranty. That began nearly a year-long series of visits to dealers in the U.S, and Canada without any luck. The problem - whatever it was - created a safety hazard on the road so Leventually sold it, What's most disgusting is that the Canadian Chrysler Corp. officials contacted didn’t seem in the least bit interested in helping us with our dilemma. The whole ordeal cost my wife and me great anxiety, loss of vacation time and money.”
John Deere 850 4-WD tractor
0 Best Buys1 Worst BuyErnie’s impressed with his Mahindra 5002 tractor equipped with a front-end loader. “I couldn’t be more pleased. It has done everything I needed without any serious problems or downtime.
“My 1988 Deere 850 4-WD tractor was one of my worst buys ever. It was the hardest tractor to get on or off I ever saw. It had brake problems all the time and also electric wiring problems. I traded it in for the Mahindra model and bless the day that it left our farm.”
John Deere 850 MFWD tractor
1 Best Buy0 Worst BuysPaul Hansucker, Polson, Mont.: "My Ezee-On 1201 offset disk is well-designed and well-built (5110 62nd St., Vegreville, Alberta, Canada T9C 1N6). The company used good heavy materials to build it. It's easy to adjust and does a good job." Steve Dittoe, Somerset, Ohio; "My 1989 Deere 850 MFWD tractor is my best buy. I've used it to do everything from moving round bales to cultivating corn, yetit's small enough to mow my yard. It's one of the most used tractors on our farm. We've never had any problems with it.” On the minus side, Steve lists his Skil 4 1/2-in, angle grinder. "It doesn't run smooth atall. I've only used it to do a couple of jobs butitalready acts like the bearings are going out. Next time I'll spend more money and buy a Milwaukee.”
John Deere 8520 tractor
1 Best Buy0 Worst Buys“My 2002 Deere 8520 tractor is my best buy. We had been farming only Case tractors until we decided to try Deere. I like it so much that I’d never go back to Case.
“My 2003 Ford F-350 pickup equipped with a V-8 turbocharged diesel engine is my worst buy. After two months the engine blew up. We have a 1986 Chevrolet 1-ton pickup and haven’t had any problems with it. It goes to show you which brand is on top.”
John Deere 855D Gator
1 Best Buy0 Worst Buys“My Deere 855D Gator is handy for hauling wood and doing chores around the farm. It’s powered by a Yanmar diesel engine that starts easy, even in cold weather.
“I also like the 1978 Deere 2440 tractor equipped with a Deere 145 front-end loader that I bought used two years ago. I wouldn’t part with either tractor.”
John Deere 8560 tractor
1 Best Buy0 Worst Buys“My best buy is my 1991 Deere 8560 tractor which has 4,100 hours on it. It’s an outstanding tractor that’s easy on fuel and trouble-free. However, I wish it had bigger 20.8 by 38 tires instead of 18.4 by 38’s. We recently purchased a new Deere 9300 tractor equipped with a 360 hp engine to help out on our farm.”
John Deere 8560 MFWD tractor
1 Best Buy0 Worst BuysTerry Simpson, Portage La Prairie, Manitoba: “My 1991 Deere 8560 MFWD tractor is a pleasure to operate and a best buy. I've put 450 hours on it without one minute of downtime. The cab offers a great view and I like the 24-speed transmission.
John Deere 8570 tractor
1 Best Buy0 Worst Buys“My 1994 Deere 8570 tractor and Deere 7400 MFWD tractor are both best buys. The 8570 is the most comfortable tractor I’ve ever operated. It’s rated at 250 hp but seems to have even more power than that. The 7400 is comfortable and handles nice, and it has a lot of power and great hydraulics. It’s the ultimate utility tractor. “MyMiller Matic 250 Mig welder works good and makes me look like a professional welder.”
John Deere 8630 tractor repowered
1 Best Buy0 Worst BuysHarold Beach, Leonard, Mo.: Harold had his 1979 Deere 8630 tractor repowered with a Cummins diesel engine imstalled by Kinze Mfg. and says it’s a “best buy”. “The conversion worked out exactly the way Kinze said it would. It costs less to repower with a Cummins and the tractor’s better now than it was before. I'd do it again if I had to.”
John Deere 870A
0 Best Buys1 Worst BuyDave’s impressed with his 2005 Stihl MS 180C chain saw equipped with an “Easy 2-Start” option. “Over the years I’ve used at least five different brands of gas-powered chain saws, and Stihl models have worked at least as good as any of the others. However some brands, including Stihl’s, tend to pre-ignite and pull the starter rope out of my hand - especially when they’re hot. This little 180 model is quite light, and when you pull the starter rope you wind up a spring that in turn rolls over the motor. It takes a little getting used to because of the soft pull, but so far I really like it.
“My 2004 Deere 870A side delivery manure spreader is my worst buy. If I put just one loader bucket too much manure in it, I could leave a 135 hp tractor running flat out while I did the chores, ate supper, watched the news and had a snooze before the spreader would even start to unload. The rotor bearings on this spreader seldom lasted more than six months, and changing them is a half day job. Before long the flail chains stretched so that whenever a bearing went out, the flails would beat a hole in the spreader’s body. Fortunately, only eight bolts held the box to the tandem running gear so it was easy to cut them off to convert it into a trailer. I cut the rest of the spreader up for scrap.”
John Deere 875
1 Best Buy0 Worst BuysGerald Grant, Nevada, Iowa: Gerald’s impressed with his 1991 Deere 875 12-row, 30-in. high residue row crop cultivator. “It’s well built and can handle a lot of trash and stays in the ground regardless of how hard the ground is. We're pretty much Case-IH customers. We bought this cultivator because our local Case-IH dealer couldn't get acultivator that we had ordered seven months earlier and we needed it. We couldn't be happier with it. “Sears Craftsman electric-powered shop tools have lost some of their quality. For example, on drills the chucks slip and won’t hold bits, switches fail, and the motors burn out. We’ve started buying Makita electric hand tools.”
John Deere 875R Gator
1 Best Buy0 Worst Buys“My best buy is a Deere 875R Gator. It has real heat and A/C. The composite dump bed is great.”
John Deere 8760 tractor
1 Best Buy0 Worst Buys“I’m generally satisfied with my 1994 Deere 8760 tractor.
“My 1974 Deere 4230 tractor has more than 11,000 hours on it but still works great. It has never needed a major repair.”
John Deere 8770 tractor
1 Best Buy0 Worst Buys“We bought our 1995 Deere 8770 tractor used last year, and so far it’s worked out great. It’s comfortable to drive, although we’ve had some problems with wheel hop. The air conditioner didn’t work properly but the dealer promptly took care of the problem.”
John Deere 885 ridge till/no-till 8-row
1 Best Buy0 Worst BuysDean McIntosh, Missouri Valley, Iowa: Dean’s had good luck with a Deere 885 ridge till/no-till 8-row cultivator. “Itdoesn’t plug and really moves fast in trashy conditions. Adjustable row-guard discs let me get in close to the row. However, the cultivator is so heavy it takes a large tractor or lift assist wheel to pick it up safely.”
John Deere 886 cultivator
0 Best Buys1 Worst Buy“I like my Orthman 8350 ridge till cultivator. It works great in high residue without plugging and has easy-to-use adjustments. Also, the company provides great service.
“I use my Deere 8300 tractor to pull the cultivator and it’s also a best buy. It’s comfortable, quiet, and easy on fuel. The view from the cab is great.”
On the negative side, he had trouble with hisDeere 886 cultivator and Deere guidance hitch for it. “The cultivator was always plugging up with residue so the company sent a representative out to our farm. He came out after a heavy rain, told me the cultivator was plugging because of the wet conditions, and left. However, the cultivator had been plugging up even in perfectly dry ground. Another problem was that the guidance hitch was equipped with electric controls and therefore could only be pulled by my Deere 8300 tractor. I finally traded both units off for the Orthman cultivator.”
John Deere 9000
1 Best Buy0 Worst Buys“We’ve owned six Deere 9000 series combines since 1992 and have been happy with all of them. The engine on our current model, a 9570 STS, locked up at 120 hours. However, the company supplied a complete new engine and the dealer had it installed in just three days. Meanwhile the dealer provided a good, used combine to us free of charge. Deere’s customer service is the best.”
John Deere 900 7-shank subsoiler
0 Best Buys1 Worst Buy“It has exceptional lugging power and servicing it is a dream,” says Dean, pleased with his 1994 Case IH 9270 4-WD tractor equipped with a Cummins 330 hp diesel engine and a manual transmission. “The transmission and hydraulic reservoirs are separate, which I think is great for long life. The cab is very comfortable.
“My 1995 Deere 900 7-shank subsoiler is my worst buy. The irons supporting the shanks aren’t heavy enough and the shear bolts are only 5/8 in. in diameter, which I think is too small especially when the ground is dry and hard during the fall. This machine should have been built heavier.”
John Deere 9100 tractor
1 Best Buy0 Worst BuysRon’s impressed with his 1999 Deere 9100 tractor. “It has a lot of power and a good hydraulic system. The gauges for the hydraulics, transmission, and antifreeze are very convenient. My only complaint is that the engine oil fill port is located so that unless you use a flexible spout on the funnel you can’t pour oil without spilling it. Also, for some reason the rear-mounted Halogen lights attract dust whenever we pull implements across the field. The dust clings to the lights and reduces rear visibility by about 80 percent.”
John Deere 9100 4-WD tractor
1 Best Buy0 Worst Buys“My Deere 9100 4-WD tractor has worked perfect for 1 1/2 years. I’m impressed with its power and torque. It replaced an old Steiger. The Deere model uses only half as much fuel and is much more comfortable to drive.”
John Deere 9120 tractor
1 Best Buy0 Worst BuysRichard’s impressed with his 2003 Deere 9120 tractor. “It’s equipped with a 496 cu. in. engine that’s rated at 280 horsepower but feels like it has a lot more. The 24-gear transmission has many working speeds so it’s an easy job to find just the right one. This tractor is fuel efficient and has had no problems so far.”
John Deere 915E zero-turn mower
1 Best Buy0 Worst Buys“My best buy is my Deere 915E zero-turn mower. This mower is equipped with a 54-in. mowing deck. It leaves a smooth cut, disperses clippings over a wide area, and allows you to mow at a fast speed. It’s easy to service and has a minimum of electronics which makes it easy to troubleshoot and repair if needed. So far, 260 trouble-free hours.”
John Deere 918 flex head
1 Best Buy0 Worst BuysPaul Wielfaert, Britton, Mich.: Paul nominates his 1990 Deere 918 flex head as his “best buy”. “It performs much better than the 200 series platform that I traded in. Runs smoother and quieter and makes the combine perform much better. One problem was that the dealer who sold it to us said it would adapt right up to our combine. It didn’t, We had to add some electronic controls and auger flighting. We also had to change some sprockets and pulleys in order to get the proper speeds. Once We did this with no help from the dealer - it worked well.”
John Deere 920 mower conditioner
1 Best Buy0 Worst Buys“My 1994 Deere 920 mower conditioner is well built. I’m impressed with the impeller conditioning system. I use a Deere 2350 50 hp tractor to pull it.
“I also like my Deere GT42 garden tractor. The 14 hp engine handles a 48-in. mower with ease.”
“I find Goodyear Dynatorque II tires to be very rough riding on the road at certain speeds. I replaced them with Armstrong tires which I like much better.”
John Deere 925 MoCo disc mower-conditioner
1 Best Buy0 Worst BuysSam likes his Deere 925 MoCo disc mower-conditioner. “We bought it used two years ago and haven’t had any major problems with it. It’s one of the best disc mower-conditioners that we’ve ever used. It works much better than the older mower we had been using.
“My DR push mower is my worst buy. It hasn’t worked as good as the company’s advertisements say it will. It cuts good in short grass, but in tall grass it wraps up and isn’t as easy to use. It works better than hand-carried weed eaters, but not a lot better.”
John Deere 9300 4-WD tractor equipped
0 Best Buys1 Worst Buy“My 1997 Deere 9300 4-WD tractor equipped with a powershift transmission is my worst buy. Every time I push on the clutch the transmission automatically goes to first gear, so I have to shift through all the gears to get to the gear I want. The tractor is equipped with the weights and tire size and pressure recommended by the company, yet ‘wheel hop’ is so bad I often have to stop, which puts the transmission back into first gear again. Another problem is that it shifts rough and jumps and jerks terribly. It had just 28 hours on it when I traded it for a Caterpillar Challenger. The Cat is a nice tractor to operate.” He’s impressed with his 1996 Dodge 3/4-ton pickup equipped with a Cummins diesel engine and 5-speed transmission. “It has a lot of power and gets 22 mpg on the highway and 14 to 15 mpg pulling a trailer, and it doesn’t use any oil. It rides nice for a 3/4-ton pickup and is a pleasure to drive.”
John Deere 930M zero-turn riding mower
1 Best Buy0 Worst Buys“We work our 2016 Deere 930M zero-turn riding mower hard, sometimes using it like a brush cutter in places that don’t get mowed very often. We’ve driven it over pipes, hedge posts, large rocks and so forth, yet have never broken a spindle. We’ve bent the blades on it but there have been no expensive breakdowns. All we do is change the oil and filters and grease it up, then get on it and go. This is one tough mower.”
John Deere 9320 tractor equipped
0 Best Buys1 Worst BuyMarc’s disappointed with his 2005 Deere 9320 tractor equipped with a powershift transmission and a 3-pt. hitch. “We had barely put 30 hours on the machine, when the tractor would no longer move because a microswitch on the clutch pedal started to stick. After we installed a set of saddle tanks, the company said they would void the warranty unless we took the tanks off and installed a set of frame stiffeners.
“But our real trouble began when we started to plant using an Orthman 1tRIPer strip-till rig tied to our planter. The tractor has a Cat. I 3-pt. hitch with poor capacity. Any time the nose of the tractor goes over a hump it won’t pick up the Orthman rig. At 151 hours the frame of the tractor gave out causing the tractor to buckle in half. The company blamed the problem on soft metal, but about 10 bolts is all that holds the front and back halves of the tractor together. At 200 hours the top link on the 3-pt. hitch broke while we were raising the machine at the end of the field, dropping the planter. The bolts that hold the pins in on the quick hitch broke and the pins worked themselves out of the hitch.
“The powershift transmission has a protection mechanism built into it so that when shifting from forward to reverse, sometimes it pauses and sometimes it doesn’t, making it hard to tell whether to set the planter down or wait for the tractor to decide which way it’s going. Any time the tractor is under load, when I’m shifting from eighth to ninth gear, it jerks really hard. I can’t believe Deere can get away with rating this tractor at 375 hp because it has no reserve power. It can’t pull on a really long grade under load without giving up. Our dealer has been great to work with, but the company apparently does not care if we ever buy any more of its equipment.”
John Deere 935 MoCo conditioner
1 Best Buy0 Worst Buys“My 1999 Deere 935 MoCo conditioner works well and has been trouble-free. It’s easy to adjust and is a well-designed machine.
“My wife insists that our all-time best buy was a Red Devil 8-ft. snowblower which we purchased during a big blizzard in 1996. It really saved us. However, we haven’t had any big snowstorms since then.”
John Deere 9400 4-WD tractor equipped
1 Best Buy0 Worst BuysMarvin’s the satisfied owner of a 1997 Deere 9400 4-WD tractor equipped with triple wheels. “I love to drive it. It has a lot more pulling power than the company’s previous 8970 model. I used it last year to pull a 54-ft. chisel plow and it used only 1/2 gallon per acre of fuel. I can hardly believe that much power can be delivered on such little fuel.”
On the “worst buy” side, “My Deere 730 air drill was a nightmare to use. Anywhere in the field that was a little wet the discs would mud up, causing them to slide along which left seed on top of the ground. I traded it for a Deere 1850 no-till air drill. It never muds up and seeds equally well in conventional or no-till. I love it.”
John Deere 940 4-WD 32 hp
1 Best Buy0 Worst Buys“It’s the best small tractor I’ve ever owned,” says Coy about his 2005 Deere 940 4-WD, 32 hp. tractor equipped with a Deere 440 front-end loader. “I use the loader and a 3-pt. mounted spear to load 4 by 5-ft. round bales in the field and then stack them in our shed. I also use the tractor to feed our cattle all winter long in a muddy feedlot.”
John Deere 940 Danish tine field cultivator
0 Best Buys1 Worst Buy“One of my worst buys was a Deere 940 Danish tine field cultivator. We spent a lot of time replacing bearings in the set of rolling baskets on back. We’re trading it off for a Remlinger harrow.”
John Deere 9410 combine
1 Best Buy0 Worst Buys“My 1998 Deere 726 Soil Finisher makes an excellent seedbed and is a best buy.
“My 1998 Deere 510 disc ripper does a super job of cutting stalks and breaking up hard pan.
“My 1998 Deere 9410 combine is an all-around excellent machine with wonderful operator comfort.”
John Deere 945 disc mower
1 Best Buy0 Worst Buys“My 1973 Deere 4430 tractor has almost 10,000 hours on it, and the only repair we’ve had to make was 10 years ago when we replaced a gear on the injector pump. We use it every day and it still has as much power as when it was new. My only complaint is that it starts hard in cold weather.
“Our 1998 Deere 945 13-ft. disc mower does a beautiful job of mowing. We average 60 acres a day with it and it requires very little maintenance. One complaint - I wish the company would stick with either American or metric bolts – not both.”
John Deere 9450 grain drills
0 Best Buys1 Worst BuyRenee’s disappointed with his 1995 Deere 9450 20-ft. grain drills and Deere drill transport hitch. “They were advertised as minimum till/no till drills, but we had problems using them in stubble and also in disked or cultivated ground which resulted in a poor crop. The company wouldn’t do anything about it. I’m very disappointed in both the drills and the company.”
John Deere 945 MoCo discbine
1 Best Buy0 Worst BuysDavid’s impressed with his 1996 Deere 945 MoCo discbine which he bought used. “I had been cutting hay for years using New Holland haybines equipped with sicklebars. One day my haybine broke down, and I still had about five rounds to cut so I borrowed a neighbor’s Deere discbine. It made a believer out of me. It lets you cut hay as fast as you can ride the tractor, and it never plugs up.
John Deere 946 discbine
1 Best Buy0 Worst Buys“My Deere 946 discbine is my best buy. It cuts close even in down hay. I flipped the knives over for the first time after cutting 500 acres. It takes only about 10 minutes to change the knives and costs $22. The cost to operate this machine is quite low.
“My Generac 3500 psi pressure washer is my worst buy. At 20 hours the pump - made by Caterpillar - blew up. Caterpillar wouldn’t warranty the pump because they said it had run out of oil. Yet I know the pump was full of oil when I started it that morning. A pair of local mechanics looked at the pieces and they both said the journals weren’t scarred and that the problem was a faulty connecting rod. Caterpillar wanted $1,200 for a new pump, yet I only paid $1,100 for the entire washer, which is equipped with a Honda engine. I ended up installing an AR pump for $500.”
John Deere 95
1 Best Buy0 Worst BuysLawrence Erlenbusch, Angela, Mont.: “My Deere 95 combine, which I bought used, is my best buy because it’s casy to service and operate. However, it’s turning into my worst buy because Deere no longer makes parts for it.” James E, Duermeier, Pulaski, Tenn.: “Thirteen years ago! boughtan Echo452VL 16-in. chain saw. It has been a real workhorse. It even survived being run over by a bulldozer. The only parts (other than chains) that have had to be replaced were a plastic gas line and a gas filter. “T'm also impressed with my CattlePro beef cattle records, management and performance analysis software (Bowman Farm Systems, Inc., Rt. 5, Box 25, Cynthiana, Kent. 41031). It’sa great way for beef cattle producers to keep comprehensive records. The computer program is casy to use and covers every type of record that a cowman needs for a successful operation, such as weights and measures, herd inventories, sires, dams, progeny, cow doctoring, pelvic measurements, etc. You decide what records to keep. The bottom line is that Cattle Pro can track a snake across a flat rock. I really like it.” Lloyd Rosborough, Harvey Station, N.B.: “My worst buy is a Case-IH 485 tractor. It has 1,600 hours on it. I’ve installed two new clutches.”
John Deere 9500 4-WD combine
1 Best Buy0 Worst BuysRichard Warren, Miller, Mo.: “My 1992 Deere 9500 4-WD combine is a best buy. Last year was extremely wet which caused the combine to pull hard on our bottom gumbo soils, but the 235 hp engine had plenty of power to handle it. The cab is ajoy to work in and the combine doesa good job threshing and cleaning.” David J. Monteith, Birchrunville, Penn.: David nominates his 1993 Ford F450 super-duty dump truck equipped with a 7.3-liter diesel engine and 5-speed manual transmission as his “best buy”. “I own two other Ford diesel light trucks. I've used them hard but have had excellent luck with all of them. They don’t cost much to maintain. None of them has needed any repair work under warranty.” Travis D. Stanley, Mountain City, Tenn.; “I like my 1991 Zetor 5245 4-WD tractor. It cost only $16,000 compared to $25,000 for other tractor brands with comparable power. It had a few problems at first. A bearing went out and there were fuel line problems with less than 150 hours. Now it has 373 hours and is going strong.”
John Deere 9500 Maximizer combine
1 Best Buy0 Worst BuysDennis Behler, Culdesac, Idaho: “It performed beyond my expectations and is a real pleasure to operate,” says Dennis about his 1989 Deere 9500 Maximizer combine, “Does an excellent job of cleaning and saving grain and covers a lot of acres ina day.”
John Deere 9501 pull-type combine
1 Best Buy0 Worst Buys“We bought our 1990 Deere 9501 pull-type combine used in the fall of 1997, and it’s our best buy. It has handled three harvests on our farm and done an excellent job. Grain threshing samples are quite clean with very few ‘beat up’ kernals per dump.”
John Deere 950 MFWD tractor
1 Best Buy0 Worst BuysFrank likes his 1989 Deere 950 MFWD tractor. “It does everything I ask of it and has never been back to the shop.”
John Deere 9510 combine
1 Best Buy0 Worst Buys“My Deere 9510 combine has excellent power and fuel economy and can easily handle my 30-ft. grain platform and 6-row corn head. The Contour Master feature that controls the header works great when going over ditches and dry dams. Also, the cleaning shoe adjustments on this combine are much easier to make than on older machines.”
John Deere 955 30 hp tractor
1 Best Buy0 Worst Buys“My 1995 Deere 955 30 hp. tractor works great. I accidentally tipped it over several times, but the rollover bar kept me safe. I raise goats and grow hay on a hobby farm. I use hay-making implements made in China because they’re smaller and better suited for my small 2-acre fields. The combination of an American-made tractor with Chinese-made implements has worked out for me.”
John Deere 960 field cultivator
0 Best Buys1 Worst Buy“My Deere 980 field cultivator has plenty of trash clearance and leaves the ground smooth and level.
“My worst buy was my Deere 960 field cultivator. It was equipped with single wheels on the wings which prevented dirt from flowing and caused ridges.”
John Deere 9630T tracked tractor
1 Best Buy0 Worst BuysEd’s best buy is a 2010 Deere 9630T tracked tractor. “All I’ve done to it is replace a fan hub drive and one set of tracks. It’s approaching 11,000 hrs.”
Ed isn’t as happy with his 2011 Deere 6R 195. “I had nothing but overheating problems. The dealer did everything possible but just couldn’t fix it. I had to get rid of it.”
John Deere 9650 walker combine
1 Best Buy0 Worst BuysJim’s impressed with his 2000 Deere 9650 walker combine. “Over the years I’ve used many Deere combine models, ranging from the 7700 up to this 9650. The 9650 is without a doubt the best Deere combine I’ve owned. It’s easy to set and also to operate. I love the new loss monitor and the return-to-cut feature is a great asset. The tailings monitor is a great feature, too. By following the instructions that came with the 930 rigid platform, we were able to move the cutterbar to the forward position. This has really helped feed the crop in better. We also tilted the cutterbar up. As a result we have no more broken guards, sections, or injested stones.”
John Deere 970 4-WD tractor equipped
1 Best Buy0 Worst BuysSteven nominates his 1997 Deere 970 4-WD tractor equipped with a 430 front-end loader as his “best buy.” “After I bought this tractor I bought a 220-acre ranch. Now I use it to operate a 9-ft. Vicon cutter, New Holland 850 baler, and numerous other implements that are probably too big for it. I also use it to haul rocks, hay, wood, shavings, litter, etc. This tractor is rated at 35 hp but far outperforms that rating. It comes in a small package but has a big heart. It’s an outstanding product that can compete with tractors twice its size.”
John Deere 9750 STS combine
1 Best Buy0 Worst BuysCraig nominates his 2001 Deere 9750 STS combine as his “best buy”. “In my opinion, this combine performs better than any other machine on the market. It has delivered everything that the company promised, and more. It has enormous capacity and provides unsurpassed grain quality. What’s more, it’s very comfortable to operate.”
John Deere 9760 STS combine
1 Best Buy0 Worst Buys“This is the first rotary combine I’ve ever owned and I really like it,” says Larry, pleased with his 2005 Deere 9760 STS combine. “I bought it during the bean harvest of 2004. It has a large wire concave for beans and did a wonderful job. No pods showed up in the grain tank. Most people use a round bar concave for harvesting both corn and beans, but they often complain when cutting beans that the beans aren’t clean enough. The large wire concave that I use just for beans does a better job and results in a premium market price.”
John Deere 9770 combine
1 Best Buy0 Worst Buys“The Deere 9770 combine I bought used last year is a smooth running machine and has a lot of reserve power. The cab is quiet and comfortable.”
John Deere 980 24 1/2-ft field cultivator equipped
1 Best Buy0 Worst Buys“I’m well pleased with my Deere 980 24 1/2-ft. field cultivator equipped with a 5-bar harrow. I use it to incorporate herbicides after they’ve been custom applied. I pull it with my Deere 7810 tractor at a speed of 5 1/2 to 6 mph. It mixes the soil well and is easy to adjust. My herbicides worked great last year.”
John Deere 980 26 1/2-ft field cultivator equipped
1 Best Buy0 Worst Buys“My 1995 Deere 980 26 1/2-ft. field cultivator equipped with C shanks does an excellent job in heavy residue. It doesn’t bounce up and down like my old Deere 1010 model did. I just turn the crank to set the depth and it stays put. One problem is that the outrigger wheels create a hole when turning at the end of the field. They should be in line with the center wheels. “My 1996 Dodge 3/4-ton 4-WD pickup equipped with a V-10 engine and 5-speed transmission is a best buy. The V-10 engine has awesome power and gets 13 1/2 mpg to 14 mpg on the highway. The pickup has an excellent ride and handles great. It’s equipped with a 4:10 rear end so it’ll easily pull a 500 bu. load. Also, it’s easy to service. One problem is that it should have a sixth gear for better fuel economy on the highway. Another problem is that the battery ran down after the pickup sat idle for only eight days. The driver is supposed to receive a warning if he accidentally leaves the headlights on. However, it only works if you take the key out of the ignition.”
John Deere 997 zero-turn diesel
1 Best Buy0 Worst Buys“In 2012, I bought a Deere 997 zero-turn diesel with a 60-in. deck. I mow our lawn and several paddocks and trails on our 64-acre horse farm. I haven’t had one problem. It has lots of power.”
John Deere 9976 6-row cotton picker
1 Best Buy0 Worst Buys“My Deere 9976 6-row cotton picker is my best buy. It’s the fastest cleanest picker I’ve used in the 45 years I’ve harvested cotton. I’ve had very few problems with it.
“We have three Deere 4960 tractors with a lot of hours and no problems. They’re very economical to run. They have a lot of power and handle with ease.
“My Bush Hog 4214 pull-type cutter equipped with an offset center gearbox is my worst buy. It leaves strips of uncut grass or weeds. The company wouldn’t listen when we complained about the problems. I won’t buy any more Bush Hog products.
John Deere A tractor
1 Best Buy0 Worst Buys“My dad bought a new Deere A in 1952. This tractor has never been out of the family: 1952-dad, 1996-son and 2002-grandson. The tractor has never been taken apart. The only replacement part was a new exhaust manifold. The tractor runs really well.”
John Deere A520R round bale accumulator
1 Best Buy0 Worst Buys“I buy bulk diesel fuel and treat it with Hydrotex Arctic diesel fuel treatment (www.hydrotexlube.com; ph 800 527-9439). No worries about fuel gelling, even at 20 to 30 degrees below zero. This product is expensive but can save a lot of downtime.
“With my Deere A520R round bale accumulator, I can place big round bales at both ends of the field or in one row in the field. It helps prevent damage to the next hay cutting and also greatly reduces the time I have to spend gathering bales.”
John Deere AC-3615RB-G Road Box
1 Best Buy0 Worst BuysJohn’s best buy is a 2020 Deere AC-3615RB-G Road Box. “I bought this Road Box for my mobile repair business, and it hasn’t failed me yet. The drawers still open and close like the day I bought it. It was definitely worth the money.
“My worst buy is a 2023 Power Torque 3/8-in. ratchet with a blue handle. I barely got a week’s use out of it before it stripped the teeth in the head. I have a K Tool 3/8-in. Pro ratchet I’ve had for 14 years that has never given me a problem, even though I use it every day.”
John Deere AMT 600 5-whceeler
1 Best Buy0 Worst BuysE.J. Flinchum, Christiansburg, Va.: “My 1988 Deere AMT 600 5-whceeler is the handiest machine on my farm. I use it to to haul almost anything, to drive in the cows, and to bring in baby calves. It’s stable on hillsides and has good brakes and excellent pulling power. To keep the seat dry I popriveted a piece of water-repellant canvas behind the seat. pull the canvas over the seat when I park the rig and move it back when I use it.”
John Deere AMT 600 ATV
1 Best Buy0 Worst Buys“Our best buy is our 1988 Deere AMT 600 ATV. We use it every day to haul everything from hay to visiting relatives on our cattle and llama ranch. We had to replace the vacuum fuel pump with a 12-volt unit. Otherwise our little 5-wheeler has been trouble-free. I added four stake pockets inside the box so we can haul larger loads of brush or unroll fence wire.
“We’re also well pleased with our 2-year-old Deere 1070 (Yanmar) 4-WD utility tractor powered by a diesel engine. It’s small enough that we can use it inside our barn, yet it plows snow better than heavier tractors we’ve owned in the past.”
John Deere Buck 4-wheeler
1 Best Buy0 Worst BuysWalter says the 2006 Deere Buck 4-wheeler he bought 8 years ago is his “best buy”. Deere introduced the Buck in 2005 and it was produced by Bombardier in a partnership between the 2 companies. It was not continued for the 2007 model year.
“It was a demo model with about 60 miles of hard use on it. I tried it out and loved it. It has a ‘slide-through’ seat that makes it easy to get on and off. That’s important to me as I’m only 5 ft. 4 in. tall. I haven’t had any trouble since I bought it. I use this machine to plow snow, haul firewood, and to go fishing.”
John Deere Buck 4-wheelers
0 Best Buys1 Worst Buy“My Kobalt cordless 40-volt chainsaw equipped with a 12-in. bar is lightweight and reliable (www.kobalttools.com). Works great.”
On the minus side, “I’ve had problems with my two Deere Buck 4-wheelers. One machine dies whenever the engine heats up, then 30 min. later it’ll start again and run a little longer before the engine quits again. I had two reliable repair shops look at it but they can’t solve the problem. The other 4-wheeler locks in second gear, and I’m told repairing it will cost $2,000.”
John Deere Buck ATV
1 Best Buy0 Worst Buys“I bought a Deere Buck ATV used at an auction with about 1,600 miles on it. Deere only made them from 2005 to 2007. The engine ran rough so my Deere dealer installed a new carburetor kit, which didn’t help. The engine had to be overhauled. I wasn’t able to put two miles on the rebuilt machine before the engine started blowing oil out and died. It took two weeks to put in a new head gasket, which cost a lot of money. We got it running but the transmission was terribly hard to shift.
“Then at 2,014 miles the engine started running rough again and died. The dealer has had this machine more than I have, and the company won’t stand behind its defective product.”
John Deere CS40 chainsaw equipped
1 Best Buy0 Worst Buys“My 2009 Deere CS40 chainsaw equipped with a 16-in. bar is the best chainsaw I’ve ever owned. It starts every time and is powerful and lightweight. I own five chainsaws, and two are CS40’s. They work great.”
John Deere CT 322 compact tracked loader
1 Best Buy0 Worst Buys“My 2007 Deere CT 322 compact tracked loader is powerful with good flotation. It had some structural and mechanical/electrical problems in the beginning, but the dealer promptly took care of them. The track system is easier than most to keep clean and maintain.”
John Deere CX Gator
1 Best Buy0 Worst Buys“I like my 2009 Deere CX Gator. Although I’m not a Deere fan, being partial to the red paint of a Massey, we decided to buy the Gator. It’s only a 2-WD model but it does a good job of plowing snow and gets me around our ranch very well without tire chains. We’re well pleased with it.”
John Deere D110 riding mower
1 Best Buy0 Worst Buys“My 2011 Deere D110 riding mower runs fine and does a great job cutting my lawn.
“The pipe threaders I bought at Northern Tools are my worst buy. I needed a cheap set of pipe threaders to keep in my truck for repairs around the ranch. I really wasn’t expecting too much. However, the 1-in. die chipped on the first use and the 1 1/4 and 2-in. dies left very rough threads. I should have spent more and bought Rigid pipe threaders.”
John Deere D130
0 Best Buys1 Worst Buy“It’s the worst riding mower I’ve ever owned,” says Ned about his Deere D130. “The belt jumped off every time I shut the mower down so I installed a new one. However, after using the mower 3 or 4 times, the same problem happened again. This mower turned out to be a $2,200 piece of junk.”
John Deere F1145 front-mount mower
1 Best Buy0 Worst Buys“My 1998 Deere F1145 front-mount mower has about 4,100 hours on it but still starts and runs great. I use it to mow a little more than 5 acres on 2 gal. of diesel fuel. It’s equipped with a front-mount 72-in., 3-blade mower deck. I bought the machine used with about 3,600 hours on it. It’s powered by a 3-cyl. Yanmar diesel engine, which always starts and runs great. I made a bucket loader for the tractor, and also reworked and installed a 60-in. Loftness 2-stage snowblower on it. The machine’s heated cab makes it a pleasure to work with in any winter weather.”
John Deere F725 mower
1 Best Buy0 Worst Buys“My 1992 Deere F725 mower and 2008 Deere 2520 utility tractor both work perfect. I can always depend on them.
“I bought my 2009 Heat Mate kerosene heater to provide temporary heat when the power went out during an ice storm. However, it smoked up the house so bad we had to hire a cleaning company to clean and repaint everything.”
John Deere F911 riding lawn mower
1 Best Buy0 Worst BuysMerle Thomas, Bluffton, Ind.: Merle nominates his 1992 Deere F911 riding lawn mower equipped with a 60-in. deck and 22 hp engine as his “best buy”. “The mower sits Out in front and is carried partly by the tractor instead of just being pushed on the ground, It also has an optional $500 hydraulic seat for an extra smooth ride, Sells for $13,500, Quite a mower indeed,”
John Deere F935 mower
1 Best Buy0 Worst BuysDavid Barton, Raymond, Miss.: David says his Deere F935 mower makes lawn mowing fun and isa “best buy”. “We cut six “The dealer did all he could, but the company gave me the run-around.” acres with lots of trees and buildings. It’s really fast and efficient. “My Ford QT7210 front-end loader is the handiest tool I've ever had. It’s very easy to take off and put on.”
John Deere Gator 4-WD utility vehicle equipped
1 Best Buy0 Worst BuysRobert’s satisfied with his 2009 Deere Gator 4-WD utility vehicle equipped with a diesel engine. “I use it on my 35 acres which includes brush and ravines. I can’t walk any distance so my Gator gets me wherever I need to go. I use it for cutting wood, gardening, and so forth.”
John Deere Gator 4-WD HPX equipped
1 Best Buy0 Worst BuysGary’s impressed with his 2010 Gray TSL-50 25-ton air/hydraulic jack (ph 800 821-7320; www.grayusa.com). “It works great with tractors and trucks. I don’t know how I got along without it.”
On the minus side, he lists his 2005 Deere Gator 4-WD HPX equipped with a 20 hp gas engine. “We have four of these utility vehicles, and they all start hard even when it’s 90 degrees above zero. We’re disappointed that neither Deere nor Kawasaki ever came up with a carburetor for this vehicle that works. Newer models are equipped with electronic fuel injection, which works much better, but these carbureted models stink. We’ll probably have to buy new starters in the near future.”
John Deere Gator 4x2
1 Best Buy0 Worst Buys“My 1996 Deere Gator 4x2 is old but relevant. For a 29-year-old machine, this is a gem. It has 1,000 hrs., and I’ve only replaced tires and a clutch. The only bad trait is it’s cold-blooded—constant choking in Minnesota. Otherwise, it’s great.
“My Menard’s Masterforce large grinder is terrible. Its vibration is painful. I can’t use it over 10 mins.”
John Deere Gator 6-wheeler utility vehicle
1 Best Buy0 Worst Buys“My wife and I love our 2010 Deere Gator 6-wheeler utility vehicle. We use it to haul wood. It’ll go anywhere and is low to the ground so it’s easy to get into.”
John Deere Gator 825 utility vehicle
1 Best Buy0 Worst BuysA 2011 Deere Gator 825 utility vehicle rates as Jim’s “best buy”. “It starts in all weather. The snowplow attachment is easy to put on. I use this machine for spot spraying, carrying three 26-gal. tanks in back with 40-ft. boomless spray nozzles. Some of the hills here in the Palouse region are fairly steep, and the only downside is that I can’t use engine compression to slow down when going downhill. I always have to use the vehicle’s brakes.”
John Deere Gator AMT 600 1990
1 Best Buy0 Worst Buys“For many years we’ve had good luck with our 1988 Deere Gator AMT 600, 1990 Kubota B7100 loader tractor, and 2004 Bombardier 4-wheeler.”
John Deere Gator AMT 622 utility vehicle
1 Best Buy0 Worst BuysA 1990 Deere Gator AMT 622 utility vehicle rates as Calvin’s “best buy”. “I’m well pleased with it and haven’t had any problems at all. It’s by far the handiest machine I own and is a lot of fun to drive for checking fields and small hauling jobs. Saves a lot of wear and tear on my pickup. It’s equipped with an electric dump bed which makes it ideal for hauling dirt and rocks. I don’t know what I’d do without this vehicle.
“My 1997 Ford F-250 XLT 4-WD supercab pickup rides and handles like a car and is a best buy. I bought it used two years ago and haven’t had any problems with it at all. The 4.6-liter, V-89 has engine is easy on fuel, even though this pickup has an automatic transmission. I like being able to shift to 4-WD on-the-go. I also like the cab, which has plenty of room. I’ve always owned Ford pickups and this is the best one yet.”
John Deere Gator ATV
1 Best Buy0 Worst Buys“My Deere Gator ATV is my best buy. I do wish it had more ground clearance for improved travel in snow. I use it for fence maintenance, checking on cattle, and spraying.”
John Deere Gator RSX 850i
1 Best Buy0 Worst BuysRoy says his 2013 Deere Gator RSX 850i “has a strong suspension system to handle rough off-roading and enough power to get me where I want to go in a hurry. This thing is just plain fun to drive.”
John Deere Gator TS utility vehicle every
1 Best Buy0 Worst Buys“We use our 2007 Deere Gator TS utility vehicle every day to ‘trot’ our dog about 5 miles per day, and to do various other jobs. It still has the original drive belt and spark plug. I finally replaced the rear tires this year. It has about 2,600 hrs. and starts right up no matter the weather. It’s a real workhorse.”
John Deere Green Star combine yield monitor
1 Best Buy0 Worst Buys“It drives great and gets excellent gas mileage,” says Robert about his 1997 Chevy 1500 extended cab pickup equipped with a 350 cu. in. engine.
“My Deere Green Star combine yield monitor is also a ‘best buy’. After two years of collecting data, we’re starting to see where yields are good and where they’re bad.”
John Deere GT42 garden tractor
1 Best Buy0 Worst Buys“My 1994 Deere 920 mower conditioner is well built. I’m impressed with the impeller conditioning system. I use a Deere 2350 50 hp tractor to pull it.
“I also like my Deere GT42 garden tractor. The 14 hp engine handles a 48-in. mower with ease.”
“I find Goodyear Dynatorque II tires to be very rough riding on the road at certain speeds. I replaced them with Armstrong tires which I like much better.”
John Deere GX 345 garden tractor equipped
1 Best Buy0 Worst Buys“My 2006 Deere GX 345 garden tractor equipped with a 54-in. mower deck has plenty of power and is my best buy. I use it to pull a Swisher 60-in., 13 hp finish mower. Both machines are great.”
John Deere Gyramor rotary cutter
1 Best Buy0 Worst Buys“In 1991 I was given an old Deere Gyramor 5-ft. rotary cutter in trade for some work. I use it to mow my 35 acres as often as possible. About 5 years ago a grease zerk vibrated out which allowed the bearings to fail. My Deere dealer wanted $2.49 apiece for the bearings. Instead, I purchased bearings from a local bicycle shop for 10 cents apiece. I’m 77 years old and like things that are easy and cheap to fix.”
John Deere HDX 4-WD Gator equipped
0 Best Buys1 Worst Buy“My 2005 Deere HDX 4-WD Gator equipped with a 20 hp gas engine is my worst buy. This machine is cold blooded even when the outside temperature is above 90 degrees. The carburetors have been upgraded a few times but they still don’t cold start well. Also, this machine steers hard.”
John Deere HPX diesel
1 Best Buy0 Worst Buys“Our 2006 Deere HPX diesel Gator utility vehicle is terrific, but our 2011 Deere 855 XUV Gator works even better because it’s faster and rides better. Both models can carry a tremendous load.”
On the negative side, he lists Farmco tandem axle hay wagons. “Rain water runs down the spindles and gets through the wheel seals, destroying the wheel bearings. They should have a shield to keep water out. Repair parts for each running gear cost $450.”
John Deere HPX Gator utility vehicle
0 Best Buys1 Worst BuyJim nominates his 2011 Deere HPX Gator utility vehicle as his “worst buy”. “The operator’s manual says my Gator has a warning beeper that should come on whenever the parking brake is engaged, but that doesn’t happen. As a result, I had to replace the brakes within the first 2 weeks of use because someone drove the Gator with the parking brake engaged. A company rep said the operator’s manual is in error and refused to install a beeper.
“I’ve had other problems with my Gator, too. For example, I had to replace the gear shifter shaft and the variable drive belt 3 times, and also the steering shaft, CV joints, both front wheel bearings, tie rod bushings, rack and pinion assembly, and starter. I don’t mistreat my equipment, as I own a Deere 4255 tractor with 10,200 hrs. that has required no maintenance other than replacing the seals. I also own a 2004 Ford F-350 truck with about 220,000 miles that has required only routine maintenance. But my Gator, with about 1,600 hrs. on it, has been a constant maintenance headache.”
John Deere James
1 Best Buy0 Worst BuysJames Wish, Bellefontaine, Ohio: James is the satisfied owner of a 1990 Case-IH Magnum 7130 tractor. “It offers great shifting, visibility, comfort, ride, performance, and fuel economy. Case-IH has finally made a tractor that competes with Deere.” James has had problems with Acra-Plant shoes. on his Case-IH 900 planter. “The shoes are supposed to outlast Case-IH shoes, but they don’t even come close. Each set lasts only 300 to 400 acres which is far less than the company’s claim.”
John Deere JS 20 6.75 hp
0 Best Buys1 Worst Buy“My Deere JS 20, 6.75 hp self-propelled lawn mower is my worst buy. The discharge chute plugs up constantly if the grass is wet or if it’s more than 3 in. tall. It’s poorly designed.”
John Deere L110A garden tractor
0 Best Buys1 Worst Buy“My 2003 Deere L110A garden tractor is my worst buy. It’s powered by a 17 1/2 hp Kohler engine that vibrates excessively. The tractor rides on turf tires that slip on hilly ground and work well only on level ground. Another problem is that the seat is uncomfortable. I used 3/4-in. blocks to raise the seat in order to get the pressure off the lumbar part of my back. I found that a bumper is a necessity because the plastic hood extends too far in front of the axle.”
John Deere L118 riding mower
0 Best Buys1 Worst Buy“I’ve had several best buys over the years including my 2005 Scag Tiger Cub riding mower with 48-in. cut, 19-hp. Kawasaki and flotation seat. It has 1,800 hrs. and is the best mower I’ve owned from the ages of 18 to 80. I cut yard grass, roadsides, tall fescue, and even a few corn stalks. It’s rugged and has very low maintenance costs. It burns no engine oil and has no leaks. I reset the engine governor from 3,600 rpm’s to 3,400 rpm’s to extend engine life. I use Shell Rotella 15W-40 in the engine and Amsoil in the hydraulic system. I grease the spindles per the manual and have never replaced one yet. I’ve only replaced a few drive belts and a few tension springs. Highly recommended.
“My Deere L118 42-in. cut riding mower with Briggs engine is the worst mower I’ve ever owned. It only has 400 hrs. and if you name it, it’s either broken or required a high-cost repair. It’s been to the dealer several times. It costs a fortune, and it’s never fixed. The engine intermittently or continuously misfires even though the engine has been tuned up and the entire fuel system cleaned up by the Deere dealer. The front steering was misaligned and completely wore off the tread on the front tire’s outer edges. The engine leaks oil everywhere and burns oil. The deck is too shallow and misaligned. It won’t cut tall grass; it chokes, and the deck belts slip. The engine is difficult to start. Replaced the starter windings and voltage regulator several times. It burns way too much gasoline compared to my Honda and Scag riding mowers. The spindle bearings had to be replaced. The hydrostatic drive is jerky.”
John Deere LA garden tractor
1 Best Buy0 Worst BuysA used 1946 Deere LA garden tractor rates as Michael’s “best buy”. “I bought this tractor from someone who had mounted a 4-speed Chevrolet truck transmission in front of the factory transmission. As a result, I was able to use only three super slow gears because all the other gears made the in-line transmission jump up and down.
“I removed the truck transmission and installed the correct driveshaft, and since then this has been the best garden tractor I’ve ever owned. It uses only about a half gallon of gas per hour when plowing, and even less when cultivating. And it doesn’t cost much to change the oil on a tractor this small.”
John Deere LA105 riding mower equipped
0 Best Buys1 Worst BuyDavid’s disappointed with his 2009 Deere LA105 riding mower equipped with a 19 1/2 hp engine. “I bought this mower at Home Depot. Deere wouldn’t help so I had to spend $1,600 on repairs. That’s a major manufacturing defect that the company should be responsible for.”
John Deere LA115 lawnmower
0 Best Buys1 Worst Buy“My Deere 1050 and 870 tractors are just so user-friendly. Easy on and off. Just a pleasure to work with.”
David hasn’t had such a positive experience with his Deere 955 tractor and LA115 lawnmower. “The 955s rear PTO seal leaks, and it’s not a bolt-on part. The whole bead end has to come off—not fun. Both the 955 and LA115’s paint comes off in pieces the size of a slice of bread. Deere got cheap and didn’t use any primer. Paint flakes off to bare steel, meaning rust.”
John Deere LA 175 garden tractor
0 Best Buys1 Worst Buy“I like my Kubota 3240 and 327 tractors, Honda CRF 230 and Husky 310 TXC motorcycles, 2010 Ford Escape, 1999 Subaru Forrester, and Stihl chainsaws. All of them run well, work hard, and are dependable.
“The second week after I bought my Deere LA 175 garden tractor, a tie rod arm broke. The dealer said I caused it, but you could see half the break had rust on it so the part was defective. We’ve had lots of other problems with this tractor.”
John Deere LT riding mower
0 Best Buys1 Worst BuyJames likes his New Holland LS160 skid loader. “I considered several other brands and models before I narrowed my choices down to this model and one made by Deere. My son and I tested both models side by side, with my son driving the Deere. The Deere has a higher horsepower rating but it got stuck and kept overheating. I was able to drive the New Holland model right around the Deere with no problem.”
He’s disappointed with his Deere LT riding mower. “The first year this mower went back 4 different times to the dealer for repairs. The next year we had more trouble, so when the warranty was about to expire we traded for a Cub Cadet zero turn riding mower. We’ve used it for almost 3 years with no problems.”
John Deere LT140 garden tractor
0 Best Buys1 Worst Buy“I’ve had 2 big problems with my Deere LT140 garden tractor. First there was an electrical problem that was tracked down to a bad solenoid switch, and now there’s a problem with the hydrostatic transmission. Once the tractor gets warm, it will no longer climb the slightest incline and makes a loud grinding sound. I did some research and found it’s a common problem on this transmission. Unfortunately, it’s a non serviceable component.”
John Deere LT 150 riding mower
1 Best Buy0 Worst Buys“I like my 2006 Husqvarna Rancher 55 chainsaw. Once this saw warms up it’ll start with one pull, and it has plenty of power and safety features.
“My 2005 Deere LT 150 riding mower is a real treat to operate. I use it about four hours per week and have had no problems. It has an excellent bagger and mulcher.
“My 2004 Stihl 026 chainsaw didn’t work right from the day I bought it and is my worst buy. It’s hard, if not impossible, to start and never would run more than five minutes at a time. The dealer told me it needed a new cylinder and piston. But after he installed them it didn’t work much better, and I was out $260. Now this saw sets in my shop gathering dust.”
John Deere LT 190 lawn tractor equipped
1 Best Buy0 Worst BuysJoseph’s happy with his 2003 Deere LT 190 lawn tractor equipped with an automatic transmission and 48-in. deck. “After using this machine for five years I recently replaced the belts, spark plugs, and blades for the first time. I change the oil and filter regularly.”
John Deere LX175 riding mower equipped
1 Best Buy0 Worst Buys“It’s the best piece of equipment I’ve ever owned,” says Paul about his 1995 Deere LX175 riding mower equipped with a 48-in. deck and Kawasaki 14 hp engine. “I use this mower every week to cut more than an acre of lawn, some of it quite rough. It has required only routine maintenance and doesn’t use any oil.”
John Deere LX 266
1 Best Buy0 Worst BuysEdwin nominates his Deere LX 266 and F525 mowers as his “best buys.” “We mow commercially and can’t afford down time. These mowers are very dependable.”
John Deere LX 279 lawn
0 Best Buys1 Worst Buy“My Deere LX 279 lawn and garden tractor equipped with a single stage snowblower is my worst buy. I use it to clear my driveway. My complaint is with the snowblower attachment. It has had problems with broken welds, a stripped pulley, and worn out belts. The snowblower has trouble clearing snow that’s the least bit wet or heavy. The blower should be built heavier, and its single stage design is inadequate.”
John Deere LX 280
1 Best Buy0 Worst Buys“It wasn’t cheap, but it’s the best riding mower I’ve ever used,” says Tommy about his 2006 Deere LX 280. “I recently went back to the dealer and had all new belts put on it for the first time.”
John Deere LX288 riding mower
1 Best Buy0 Worst BuysA Deere LX288 riding mower rates as Rich’s “best buy”. “I bought it to mow the grass between the trees on my Christmas tree farm. It does the job well and takes a lot of abuse on rough ground. We also use the tractor to tow trailers through the rows as we pick up stumps and brush.”
John Deere M655 zero-turn mower
1 Best Buy0 Worst Buys“I bought a used Deere M655 zero-turn mower in 2002. I’ve only had to invest in a set of belts and a set of blades. We mowed an acre plus for years and now we mow several acres on our farm. A great unit.”
John hasn’t had such a positive experience with Farm Innovators’ heated pet bowls. “Of the four I bought, two of these bowls failed during the first winter and one other failed the following winter. I have one left that’s still working on season three. I’m a little disappointed in the quality.”
John Deere Max Emerge planter
0 Best Buys1 Worst BuyAlan Sloan, New Boston, TL: “It has good trash clearance and levels the ground at6 mph,” says Alan, owner of a 1989 CaseTH 496 22-ft. disk. “My worst buy is a 1989 White 5100 6row, 30-in. air planter. raise commercial sweet corn and seed corn so I have to make sure the planter is cleaned out each time change crops. Unfortunately this planter is hard to clean out. The boxes don’t drain out right so I have to remove and clean each plastic plate separately, After owning a Deere Max Emerge planter this one is a big disappointment.” Harlan Huedepohl, Williamsburg, Iowa; “Anyone intending to buy a new Ford tractor, be advised you may have trouble attaching implements to the drawbar. Ford has changed the spacing of the drawbar holes so anyone using a clevis-type hitch is out of luck. I purchased a TW25 and found that! can’t pull my New Holland 114 mower-conditioner or Hesston 10 Stakhand. I have no problem using these implements with my Deere or Deutz tractors.”
John Deere MC crawler-dozer
1 Best Buy0 Worst Buys“A neighbor gave me a Deere MC crawler-dozer, which I find to be an awesome machine. It’s nimble, built strong, compact, and easy to transport. I’ve used it to dig out several tree stumps and to plow a lot of snow. Starts great and is easy to operate.”
John Deere MFWD 1450 tractor equipped
1 Best Buy0 Worst BuysHoward Luhr, Metaline Falls, Wash.: “My 1989 Deere MFWD 1450 tractor equipped with a Deere model 100 front-end loader is a best buy. It has 900 hours and so far I've been very pleased with it. It’s real economical on fuel.”
John Deere Mo Co Speiser hydroswing mower
1 Best Buy0 Worst Buys“My Deere Mo Co Speiser hydroswing mower is my best buy. No problems.”
John Deere Model
1 Best Buy0 Worst Buys“In 1940 I bought a 1939 John Deere Model A row crop tractor on rubber wheels, and it was a good, dependable tractor. At that time we farmed with horses, but we needed more power for plowing. We had heavy soil with lots of rocks, but even so this tractor could pull a Case 3-bottom plow and packer in second gear with no problem. It was definitely a best buy.”
John Deere Model 420T tractor
1 Best Buy0 Worst BuysBrad nominates his 1956 Deere Model 420T tractor as his “best buy”. “I rescued this tractor from its previous owner. He was using it as a parts tractor so he could rebuild another one. I built a 3-pt. hitch platform for it to haul firewood, tools, dirt, bales, ear corn and my grand children. I also take this tractor to antique tractor pulls and shows.”
On the minus side, “My Black & Decker cordless cut saw has limited power and a very short battery charge. I wouldn’t buy another saw from this company.”
John Deere Model D equipped
1 Best Buy0 Worst Buys“The first tractor I ever drove was in the 1930’s - a Deere Model D equipped with steel wheels. At the time I wasn’t even 10 years old. Later in life I bought three Deere 4020 tractors and turbocharged one of them to 118 hp. It’s still running with 12,500 hours on it and has had no major repairs.”
John Deere MX 7 rotary mower
1 Best Buy0 Worst Buys“My Deere MX 7 rotary mower cuts perfect and discharges out the center. That way I don’t have to go in only one direction through the field.
“My 2007 Troy-Bilt Bronco rototiller works good but is equipped with a Tecumseh engine. I’m having difficulty getting parts for a machine that’s only two years old.”
John Deere PowerTech 4045 industrial diesel engine
1 Best Buy0 Worst Buys“It has a lot of power and has been trouble-free,” says Marvin about his Deere PowerTech 4045 industrial diesel engine. “It’s easy on fuel and always starts in temperatures down to zero, even though it doesn’t have a block heater or glow plugs.
“The thermostat on the engine got stuck which caused it to overheat so we replaced it, but a few months later it got stuck again. A friend told us to take out the thermostat and instead use 2 washers with holes about the size of my small finger, which is enough to slow down the coolant flow but doesn’t stop it. This idea works great except in winter, when diesel fuel runs cool. To warm up the fuel we just place a piece of cardboard over the radiator.”
John Deere R loader tractor
1 Best Buy0 Worst Buys“My best buy ever was a used 1988 Chevrolet 1500 shortbed pickup equipped with a 4.3-liter, V-6 engine. I paid $1,200 for it.
“I bought a used 1952 Deere R loader tractor in 1980 and am still using it today. I also bought a used Cat D4 7U dozer at about the same time. Over the years these machines have more than paid for themselves. Good luck finding a machine today that will last as long as these have.”
John Deere RX73 9 hp riding mower
1 Best Buy0 Worst BuysRonald likes his Deere RX73 9 hp riding mower, which he bought used 8 years ago. “I needed a cheap mower for a building site with a lot of weeds and brush. If I can drive over the brush, this machine will chop it, and if I get stuck it’s light enough that I can pick the machine up out of the hole. It starts good and requires only routine maintenance.”
John Deere RX75 riding mower broke
0 Best Buys1 Worst Buy“I ¿ rst read about the EasySet Mole Trap in FARM SHOW. I’ve caught more moles with it than I can keep track of. Now I’m the neighborhood mole remover.
“My Deere RX75 riding mower broke down all the time and was a real money pit. I ¿ nally sold it to someone for parts.”
John Deere S680 combine
1 Best Buy0 Worst Buys“I bought my 2017 Deere S680 combine and 640 D draper platform to replace a Deere 9660 combine and 35-ft. platform. The result has been a significant improvement in capacity and grain quality. The technology upgrades on this combine have also helped improve our crop yield mapping ability.”
He’s disappointed with the Firestone tires on the combine. “After harvesting 1,500 acres of corn, the cords on the combine’s rear tires were already showing. However, the company said the wear wasn’t bad enough to justify replacing the tires so we kept using them. Fortunately, our tire dealer stepped in and made things right.
“The Lankota stalk stompers we use on this combine work great and are easy to install and adjust (www.lankota.com; ph 866 526-5682).”
John Deere S-82 riding mower
1 Best Buy0 Worst Buys“The Deere S-82 riding mower I bought in the mid 1970’s is my best buy. It always starts right up, and the original battery lasted about 25 years. I use it to mow an acre of lawn as well as a 3/4-mile long path around our hay field. The only weak point is the pulley on the mower deck, which has had to be replaced several times.”
John Deere S92 riding mower
1 Best Buy0 Worst Buys“I’m still using my 1986 Deere S92 riding mower. All I’ve replaced is a starter, the lower main seal, and a couple of batteries. This machine has a rear engine so it steers easy. I use a grass catcher with it which also works great for leaves. I removed all the safety switches so I can get off the machine and leave it running. If they made new mowers like this, I’d buy one.”
John Deere Saber lawnmower equipped
0 Best Buys1 Worst BuyCharlie likes his older model Deere 466 baler, which hasn’t given him any problems in two years of use, putting up 400 tons of hay per year. “It bales every bale perfectly and never misses tying one.”
He’s also pleased with two Ford 5000 diesel tractors he owns. “One’s got 3,000 hours on it, the other’s got 2,00 hours on it. They never give us a bit of trouble and are easy on fuel.”
On the negative side, he’s disappointed with his 1998 Deere Saber lawnmower equipped with an 18 hp engine. “It breaks every time I set foot on it. First, it was the steering bar. Then it was a bearing out of the mower deck. Next, a cut-out switch went out on the engine and it wouldn’t start. We finally took it back and traded it for a 1998 Craftsman with 21 hp engine which we haven’t had any trouble with so far.”
John Deere STX riding mower
1 Best Buy0 Worst Buys“I use my 1968 Deere STX 38-in. riding mower to cut my own lawn as well as a 2-acre church lawn. It’s well made. No complaints.
“The winch I bought from Northern Tool was supposed to pull two tons, but it didn’t last a month. We were only using it to skid trees from 4 to 6 in. in diameter.”
John Deere STX18 zero turn riding
1 Best Buy0 Worst BuysRomane’s the satisfied owner of a 2001 Deere STX18 zero turn riding mower. “This is the only Deere zero-turn mower equipped with a steering wheel instead of steering levers, and I like it. I don’t know why the company quit the steering wheel design. The engine has more than 1,800 hrs. on it but still runs great.”
John Deere SX Gator every day
1 Best Buy0 Worst Buys“We use our Deere SX Gator every day to get around. All we’ve replaced is the drive belt.
“I bought a Grasshopper front-mount mower equipped with a 67-in. deck and 29 hp. Briggs & Stratton engine. It does a terrific job no matter where we set the deck height, and it always stays level. The big 8-gal. gas tank allows me to mow our entire lawn without refueling.
“I’m 83 years old so I installed a grab handle to help me get on and off the mower safely. By tilting the deck up I can clean under it and also service the blades.
“I use my Brute 2,800 psi pressure washer equipped with a Honda engine to clean the deck. It works fast. I bought it at Menards.”
John Deere TRS 21 snowblower
1 Best Buy0 Worst Buys“My 1998 Dodge quad cab shortbed pickup equipped with a Cummins diesel engine is my best buy.
“My 1998 Dodge pickup has a lot of power and is fuel efficient. It also rides nice.
“My Deere 1750 Max-Emerge Plus conservation planter does a nice job of planting and is easy to maintain. No problems.
“My Ford New Holland bi-directional tractor is a pleasure to drive. I use it to oper-says Jack, pleased with his Deere STX 38 riding mower.
“My Deere TRS 21 snowblower has better balance and snow throwing power, in both light and wet snow, than a Toro 2000 snow-blower.”
John Deere Van Brunt grain drill
1 Best Buy0 Worst Buys“My 1940’s Deere Van Brunt 9-ft. grain drill is my best buy of all time. I bought it used about 15 years ago at an auction for $50. It’s equipped with 13 disc openers. I use it every year to plant about 10 acres of oats, wheat and soybeans. My only expense over the years has been for grease. It works great on a small farm like mine.
“I’m pleased with my 2001 DR field and brush mower powered by a 15 hp electric start gas engine. The first time we used it the deck froze up. However, it didn’t take long to solve the problem - one phone call and two days later the replacement deck was delivered. It does a great job mowing brush in wooded areas and along road ditches where a Bush Hog can’t go.
“My 1997 GMC Sierra extended cab pickup is a best buy. The only time it was in the shop was for a problem with a sensor in the steering system. I considered trading the pickup in for a new one, but I didn’t because I haven’t seen any other models that I like better. Another factor was that this pickup has only about 50,000 miles on it.”
John Deere X320 riding mower equipped
1 Best Buy0 Worst BuysJack’s the satisfied owner of a Deere X320 riding mower equipped with a Deere MC519 cart-mounted bagger. “This mower does a great job of picking up leaves, and the cart has excellent capacity.”
John Deere X324 lawn tractor
1 Best Buy0 Worst BuysDennis is impressed with his 2010 Morton 24 by 30-ft. pole barn/garage/workshop. “This building came as a kit delivered from Winfield, Kan., and putting it together was the simplest construction project I’ve ever done. I had no worries about when or if the job would get done. Last year I had the company install optional snow-jacks on the roof for added safety. While less expensive metal buildings are certainly available, you get what you pay for. No regrets.
“Last year I bought a used 2011 Honda Pilot SUV with low miles, and it’s the most reliable car I’ve ever owned. It has a solid body without any squeaks or rattles, and it gets up to 28.2 mpg even though it weighs 4,600 lbs. I use full-synthetic Mobil 1 oil in it.
“My 2012 Deere X324 lawn tractor is also a best buy. Really gets the job done”
John Deere X340 riding mower equipped
1 Best Buy0 Worst Buys“I’m happy with my 2007 Deere X340 riding mower equipped with a 54-in. deck. I use it to mow about 5 acres on our place. It’ll mow everything from range land grass to sage brush and even a rock or two.
“My 2008 Can-Am Outlander 800 4-wheeler has more than 2,000 miles on it and does everything I want (ph 877 469-7433; www.can-am.brp.com). It pulls a wagon and hauls a load of fence posts and other fencing materials. After the work is done I take it to the Big Horn mountains and play. It’ll crawl over just about any rock as well as push water up to its headlights. Mud is no problem for it - the deeper the better. It has plenty of power. There’s nothing like a good ride after mowing and building fence.”
John Deere X345 all-wheel-steer riding mower
1 Best Buy0 Worst Buys“It does a superior job of mowing,” says Byron about his 2012 Deere X345 all-wheel-steer 48-in. riding mower. “My wife loves it and now does almost all the mowing on our 3 acres.”
John Deere X350 lawn tractor equipped
1 Best Buy0 Worst Buys“It starts easy, has a smooth hydrostatic transmission, and maneuvers great,” says John about his 2016 Deere X350 lawn tractor equipped with a 46-in. deck.
John Deere X350R riding mower
1 Best Buy0 Worst Buys“My Deere X350R riding mower does an excellent job, is easy to operate and is better than older riding mowers.
“We continue to buy Milwaukee power tools. There’s none better than those and Stihl.
“My 2022 Ford F-150 XL twin turbo has been trouble-free. I really like to drive it.
“Fifty percent of all Chinese products are no good, even small items like nuts and bolts. What a shame for stores to stock them. They’re no bargain when you can’t use them or they cause extra work.”
John Deere X390 garden tractors
1 Best Buy0 Worst Buys“I’ve had three Deere X390 garden tractors. They’ve all worked great. I really like the power steering; they’re easy to drive and operate.”
John Deere X 457 garden tractor equipped
1 Best Buy0 Worst Buys“My best buy is my 2006 Deere X 457 garden tractor equipped with a 54C mower deck. I use it to mow my yard and other acreage with no problems.”
John Deere X475 lawn tractor
0 Best Buys1 Worst BuyA 2004 Deere X475 lawn tractor rates as Dennis’s “worst buy”. “After 20 to 30 minutes of use, the engine shuts off as if I hit a kill switch. No help from the dealer.”
John Deere X-570 riding mower equipped
1 Best Buy0 Worst BuysA 2016 Deere X-570 riding mower equipped with a Kawasaki 24 hp. engine rates as Edrial’s “best buy”. “I bought this mower used with 47 hrs. on it and use it to mow 1 1/2 acres. I love this mower.”
John Deere X585 equipped
0 Best Buys1 Worst Buy“My 1982 Kubota B7100 tractor is my best buy. I haven’t spent a dime on this tractor except for a new radiator cap. I traded it in for a 2004 Deere X585 equipped with a 62-in. belly mower, and it’s my worst buy. It’s equipped with a model 45 loader, a quick-tach snowblower, and a canvas cab. The mid pto is poorly engineered which makes it difficult to attach equipment. The tractor was leaking oil onto my cement floor, so I took it to the dealer for repair work. The tractor was there for a week but the dealer still couldn’t find the problem. I had to pay $141 just to have it checked out, and it wasn’t under warranty since the cause of the problem wasn’t found.”
John Deere X585 4-WD riding mower equipped
1 Best Buy0 Worst BuysSawyer nominates his 2003 Deere X585 4-WD riding mower equipped with a 54-in. deck as his “best buy”. “We bought it used at an auction with 730 hrs. on it for $5,000 and use it to mow our 3-acre yard. I like the 4-WD, power steering and hydrostatic transmission.”
John Deere X700 riding mower equipped
1 Best Buy0 Worst Buys“This is an excellent piece of equipment,” says Charles about his 2010 Deere X700 riding mower equipped with a 48-in. deck and cab. In winter he also uses it with a 47-in. snowblower. “The mower works great, but I like the snowblower even better. It blows snow with ease. Last winter I spent more than 40 hrs. blowing snow. We had more than 130 in. of snow and 70 days below zero, but we had no breakdowns or repairs. The riding mower is a pleasure to handle and the cab has a good heater and windshield wiper.”
John Deere X720 garden tractor
1 Best Buy0 Worst BuysJoseph’s the satisfied owner of a 2012 Deere X720 garden tractor. “It starts easy and turns easy, and the Kawasaki V-twin overhead cam engine has plenty of power. It doesn’t slow down in tall grass or deep snow.”
John Deere X720 Ultimate garden tractor
1 Best Buy0 Worst Buys“My 2012 Deere X720 Ultimate garden tractor cuts fast without bogging down or losing power. No problems.
“My 2013 Chevrolet Silverado pickup is the best truck I’ve ever owned.”
John Deere X738 tractor
1 Best Buy0 Worst Buys“My 2022 Deere X738 tractor with 60-in. mower is the best. It’s easy to drive and handles well. It has a great seat and armrests. I’m very pleased with it.”
John Deere X739 4-WD lawn tractor equipped
1 Best Buy0 Worst BuysRichard owns a 2019 Deere X739 4-WD lawn tractor equipped with 4-wheel steering, a mower deck, and a plow blade. “It works good and is fun to operate.”
John Deere X750 lawn tractor equipped
1 Best Buy0 Worst Buys“My worst buy isn’t really the fault of the manufacturer as much as it is of the federal agency that mandates regulations. I own a Deere X750 lawn tractor equipped with a mower deck, and the blade shuts off whenever I shift into reverse. It’s really aggravating. Instead of being able to easily mow around trees or make quick turns on corners, I have to keep circling around. There’s a tiny button on the tractor that I have to stop and find, and then I have to press it before I can go backward. It would go faster if I could just turn the blade off and back up, and then turn it back on again. The dealer claims he isn’t allowed to bypass the system and won’t provide any information on how I could bypass it myself.”
John Deere XL280 riding mower
1 Best Buy0 Worst Buys“My 2006 Deere XL280 riding mower is a great machine.
“I use my 2014 Polaris 400 Ranger utility vehicle around our yard and to plant wildlife food plots.”
John Deere XUV 620i side-by-side utility vehicle
1 Best Buy0 Worst Buys“My 2009 Deere XUV 620i side-by-side utility vehicle equipped with electric dump and winch wasn’t cheap, but it has served me well by carrying everything from manure to rocks to firewood. It tows log splitters and lightweight trailers with ease. It’s easy to drive and maneuver and it can traverse rugged ground thanks to its large tires and rugged frame. I’m glad I bought it.”
He’s had problems with his 2004 Husqvarna 450 chainsaw. “A few weeks after I bought it the decompression assembly loosened and fell off. I was lucky to spot the part laying in some brush. The starter was reliable at first, but is now prone to flooding. Also, within two years a plastic lever on the carburetor malfunctioned, making the choke and trigger inoperable and the saw unusable.”
John Deere XUV 625I Gator utility vehicle
1 Best Buy0 Worst Buys“I’m impressed with my 2011 Technidea Zip Level Pro 2000 level (ph 800 805-5383; www.ziplevel.com). This unit operates on one 9-volt battery. It sets up in seconds and is easy to reset, and it shows the elevations in large digital numbers in inches, feet or meters. I can measure over any distance or elevation without doing any math. It works around corners, up to the top of a dirt pile, or down into a ditch or footing. Great company support.”
On the minus side, he lists his 2011 Deere XUV 625I Gator utility vehicle. “We made many trips to the dealer but never could get this machine to run right. It stalls, hesitates, and backfires and then quits running altogether. No one on our work crew trusts the machine to get them home, so now it just sits. It might be time to trade for a Polaris Ranger.”
John Deere Z245 zero turn riding
1 Best Buy0 Worst Buys“It’s the nicest riding car I’ve ever owned,” says Emil about his 2012 Ford Focus 4-door. “On a recent 400-mile trip this car got more than 40 mpg. I had the cruise control set at 70 mph all the way.
“Our 2008 Deere Z245 zero turn riding mower does a good job of cutting grass and is comfortable to operate. It’s an excellent machine in every way.”
John Deere Z335E mower
1 Best Buy0 Worst Buys“I bought a new Deere Z335E mower in the spring of 2020. It ran well the first year but then had engine trouble. Long story short, it’s been through three carbs and several other parts through the dealer and a friend of mine. The engine looks like a Briggs & Stratton, but Deere changes them so that the parts are theirs.
“It’s never idled right, even after nearly $1,000 in repairs. When Deere came out with the new model, it looked like they changed the carb. Although I like the mower, Deere definitely had a problem. Shame on a company of its size for not taking care of this. I would be interested to hear if anyone else has had these problems.”
John Deere Z645 zero-turn riding mower
1 Best Buy0 Worst Buys“I bought a Deere Z645 zero-turn riding mower equipped with a 48-in. deck but, unfortunately, my wife drove off with it so I went back and bought another one. These mowers have more than enough power to cut tall grass. Good dealer support and a helpful parts department.”
On the minus side, he lists his 1997 Ford 1/2-ton 2-WD pickup. “The front end needed new ball joints at about 80,000 miles; the transmission had to be replaced; the rear end had to be rebuilt; and the gas tank straps broke so now we have to replace the tank. Also, the bed is rusting away even though we’ve always kept this pickup in a shed.”
John Deere Z655 zero-turn riding mower
1 Best Buy0 Worst BuysA 2012 Deere Z655 zero-turn riding mower rates as Clyde’s “best buy”. “I use this mower to cut about 3 acres of grass every week with no problems. It still has the original blades. I’m 85 years old but am able to mow my own yard because of the zero-turn maneuverability. It doesn’t use any oil - all I do is add gas and mow.”
John Deere Z 960M zero-turn mower
1 Best Buy0 Worst Buys“One of my best buys is a Deere 72-in. zero-turn mower (Z 960M). I’ve had it…”
John Deere semimounted 4-bottom
0 Best Buys1 Worst BuyMerlin Atwell, Remsen, N.Y.: Merlin’s “worst buy” is his 1990 Deere 2000 semimounted, 4-bottom 18-in. plow. “It’s not built with the quality of Deere’s other products. It doesn’t even perform as well as our 20-year-old Allis-Chalmers semi-mounted auto reset plows. The bolts wear through the points and land sides because there’s not enough taper on them. Three of the moldboards have cracks in them around the front mounting bolts, and the shear bolts continually break from coulter tension. Our dealer has done nothing to help.”
John Deere diesel-powered 4-wd
1 Best Buy0 Worst BuysBrian owns a Deere diesel-powered 4-WD Gator utility vehicle. “No problems. Easy on fuel and tons of power. Can’s say anything bad about it.”
On the negative side, he had trouble with his Deere 2520 riding mower. “The deck is weak. I had to take this machine back to the dealer several times before I finally gave up on fixing it. I wish I had never bought it.”
John Deere model 960
1 Best Buy0 Worst BuysGary Knuckles, Antwerp, Ohio: Gary nominates his 1988 Deere 25-ft, model 960 Danish tine field cultivator equipped with rolling baskets as his “best buy”. “I bought it knocked down and assembled it myself, The six rows of tines have excellent trash clearance and virtually climinate plugging. No breakdowns at all. I especially like the single point depth control feature. “My 1989 Great Plains 20-ft. Solid Stand 3-pt, grain drill equipped with the ‘pull Te ee etl rst Buys previous page) package’ is also a best buy. It’s well built and does an excellent job in seedbeds that are sometimes less than ideal. especially like the overlapping double disc openers whichcuta narrow seed trench right through trash. The 2 by 13-in. double press wheels doa good job of conuolling seed depth. My Yetter fat fold markers are a good compliment to this drill,”
John Deere harrow attachment
0 Best Buys1 Worst Buy“It’s a good looking tractor with a roomy cab and good visibility,” says George, pleased with his 1998 Zetor 105-40 tractor. “It rides nice and handles like a Cadillac. It’s a no gimmicks, straight forward tractor with a 3-speed power shift transmission. It’s also fuel efficient and uses only two gallons per hour while pulling a 5-bottom plow. I was so impressed with it that I recently bought a second model.
“My worst buy is the Deere harrow attachment I mounted on my disk. The problem was that the teeth kept breaking. I used it for only one spring. I finally took it off the disk and threw it away.
“I’ve been using my Deere 165 riding mower for 14 years and it still looks like new. No problems.”
John Deere round baler
1 Best Buy0 Worst BuysVictor’s impressed with his 1998 Deere round baler. “It’s an outstanding baler that needs very little maintenance. I used it to make more than 4,000 bales the first year, including 1,000 silage bales. I never had a problem with it plugging up or with starting a bale, whether I was making wet or dry bales.
“My worst buy is my New Idea 5209 disc mower-conditioner. It’s a high maintenance mower that isn’t designed for custom haying. The pods on it have to be greased about every two weeks. Another problem is that it rides on little shoes that don’t last even a year. It should have adjustable skids.”
John Deere boots
0 Best Buys1 Worst Buy“My worst buys are two pairs of Deere boots. On the first pair, one of the boots tore even though I don’t remember stressing it in any way. The same thing happened to the second pair. I started having doubts, but I was still convinced that these were good boots. The Deere advertisement talked about these boots as ‘equipment’. So I bought a third pair and they tore, too. I finally bought a different, cheaper brand that has lasted longer than all three pairs of Deere boots. I think the company should place a small, round lemon decal on these boots.”
John Deere equipment built
1 Best Buy0 Worst Buys“My Woods BW 180 rotary mower and Jeep Liberty are best buys. Also, I like Deere equipment built before 1990.”
John Deere header transport cart
1 Best Buy0 Worst Buys“We like our 2004 Case IH 2388 combine. For years we harvested with a Case IH 1688. Switching to the 2388 has been a great experience. It has an operator friendly cab.
“We use a 2009 Deere header transport cart to move our Case IH 2606 combine head. The problem is this cart has no suspension. As a result, we can go only about 30 mph following behind our trucks or else the cart will start to bounce. Also, the rock trap on the combine makes the machine hard to load and unload from the cart.”
John Deere chainsaw
0 Best Buys1 Worst Buy“Last summer my 30-year-old Deere 16-in. chainsaw finally quit working. I was told it was built by Echo, so I bought a 2013 Echo CS-352 chainsaw. So far it has performed just as well as the Deere.
“I still use my 1991 Dodge 250 as my everyday pickup.
“My 1951 Ford 8N is my new tractor; my 1946 Deere B is the old one.”
John Deere field chopper
1 Best Buy0 Worst BuysLinden B. Smith, Augusta, N.J.: “It does a good job. The electrical controls make ita pleasure to operate,” says Linden about his 1990 Deere field chopper. His “worst buy” is a Husqvarna model 50 chain saw. “The chain brake assembly melted on the third tank of fuel.”
John Deere tractor sound clock
0 Best Buys1 Worst Buy“I received a John Deere tractor sound clock as a gift and, even though I didn’t buy it, it’s a disappointment. It features 12 of the most notable Deere tractors, past and present. Every hour on the hour an authentic tractor sound of one of the twelve featured tractors will play. I was excited to hear the sounds of the different tractors but I got nothing but static. They all just sound like scratches.”
John Deere air compressor
1 Best Buy0 Worst Buys“This year I bought a new Deere air compressor and wish I had bought it years ago. Even though I have a large portable air compressor that I sandblast with, it’s way too big for my spray gun. The Deere model is just right for spraying paint. It always starts, even in cold weather, and has more than enough pressure and air volume to run my industrial spray guns. A lot of people make the mistake of buying an air compressor that can produce 120 psi air pressure but fail to take into account that air volume (measured in cubic feet per minute) is also very important. I am pleased with this compressor and would recommend it to anyone that needs a reliable air source.”
John Deere field cultivator
1 Best Buy0 Worst Buys“I bought a Deere 10-ft. field cultivator made in the 1950’s at an auction and am only its second owner. It still does a good job of digging. I guess some equipment is just made to last a long time.”
John Deere diesel
1 Best Buy0 Worst Buys“In 1969, I bought a 1963 4010 Deere diesel. It’s still running as a loader tractor after 54 years, two cranks, a rear-end rebuild, and three clutches. It’s the absolute best.”
James isn’t pleased with his 2003 Dodge 1/2-ton c/w 5.7L pickup. “I spent a lot on lifters and various other engine and drive line repairs. I was unlucky with mine; I have neighbors who had a lot less grief.”
John Deere self-propelled rotary disc
1 Best Buy0 Worst BuysDouglas is impressed with his two Deere self-propelled rotary disc mowers - a 2002 4990 model and a 2003 4995. “We use them in our custom business to cut up to 10,000 acres each year. We can cut almost 20 acres per hour at speeds up to 14 mph in the field. The disc heads and impeller conditioners require very little maintenance.”
John Deere no-till drill
1 Best Buy0 Worst BuysFred nominates his 1995 Deere no-till drill as his “best buy”. “It has better seed depth control than other no-till drills we’ve used in the past. The result is more even emergence which helps in weed control because we’re on a postemergence herbicide program. The even emergence is also important to us wherever we reduce herbicide rates.”
John Deere remanufactured tractor engines
1 Best Buy0 Worst BuysDean’s impressed with Deere remanufactured tractor engines. “I had their remanufactured engines installed in my 1989 and 1990 Deere 4455 tractors. The remanufactured engines produce more power and torque than the original factory ones, and they come with a 2-year warranty that covers all major engine components except the starter and alternator.
“I like the Koyker 740 Legend frontend loader that I use on my Deere 4050 MFWD tractor. Excellent craftsmanship and strength. All the attachments I had used on my previous Deere 725 loader work with this model.”
On the negative side, “I don’t like using WD-40 cans that come with the Smart Straw. Sometimes it won’t spray at all unless I hold the straw with my free hand.”
John Deere ever
1 Best Buy0 Worst BuysWalter D. Graham, Pella, Iowa: “It’s the best tractor Deere ever made,” says Walter about his 1966 Deere 4020. “I recently had it overhauled. They put ina new clutch and rear main seal. It pulls a 5-bottom plow rightalong in fourth gear at 5 1/4 mph. “My 1989 Chevrolet Astro Van equipped with a4.3-liter engine rides nice and gets 20 to 25 mpg. It can hold 8 people and has plenty of power. I like the air conditioner and stereo radio. “The 1992 Norsmann 10-ply radial tires on my 1984 Chevrolet4-WD 3/4-ton pickup are my worst buy. They don’t have the bite 1 thought they would have and don’t stay balanced which causes the pickup to shake between 40 and 50 mph. I'll never buy them again.”
John Deere farmers
1 Best Buy0 Worst BuysJohn H. Burr, Sharon Springs, N.Y.: “It's the easiest pulling plow I've ever used,” reports John about his “best buy” International 710 5-bottom moldboard plow that he bought used. “Now I know why so many Deere farmers have International plows. They can’t be beat.”
John Deere front-fold
1 Best Buy0 Worst BuysMike Mechem, Clarion, Iowa: “Our Parker 5500 wagon is fine but the rims are weak and it doesn't have large enough tires. In the first couple weeks we wrecked two rims and 4 tires. All were covered by warranty but that didn't solve the problem.” On the plus side, Mike is happy with his Deere front-fold Max-Emerge planter. “Easy to transport, excellent seed placement, and itdidn'tnced Trash Whippers like other planters I've used. Very simple to set and operate and we love the high resale value.”
John Deere wide front-mounted
1 Best Buy0 Worst BuysRobert bought a Deere 7-ft. wide, front-mounted snowplow for his 2013 Deere 5075M utility tractor. “I use this heavy-duty, hydraulic-operated plow on my 1/2-mile long driveway. I also use it for light dirt work. I like not having to turn around all the time because it saves on my neck and back. It only takes about 1 min. to replace the bucket with the snowplow.”
John Deere walk-behind rotary garden
1 Best Buy0 Worst Buys“The 5 hp. engine on my Deere walk-behind rotary garden tiller finally wore out. However, the tiller’s heavy-built frame was still in working order, so I installed a Predator 6 1/2 hp. horizontal shaft gas engine from Harbor Freight. It was an exact fit and I was able to use the machine’s original engine mounting holes.
“The Predator is very easy to start, and running it at half-throttle provides ample power. Also, it has a lower profile than the original engine. I paid about $100 for it and was able to save the cost of a new tiller.”
John Deere four-section harrow
1 Best Buy0 Worst Buys“I like myE-ZTrail gravity wagon. It pulls easy in the field, trails nice down the road, and is easy to unload. I wish I had two more wagons just like it. It holds 230 bu. of shelled corn.
“I’m happy with my Deere four-section harrow. I like the way it harrows plowed ground and bean ground. I use my old International Farmall M tractor to pull it at about 6 mph. It has nice long teeth on it.
“Another best buy is my 1948 Farmall M tractor equipped with a diesel engine. I bought it in 1994 and completely restored it. It has been in many parades and shows. I demonstrated it with an old Bear Cat grinder at the World Expo of antique machinery last year in Ankeny, Iowa. I’ve had many offers from people who want to buy it, but it’s not for sale.”
John Deere baler instead
1 Best Buy0 Worst BuysGusta Farms, Brown City, Mich.: “It should have more capacity and better bearings,” reports Gusta, unhappy with his 1989 New Idea round baler, “We had to replace abearing before we had even made 50 bales, Idon’tlike having to get outof the tractor all the time to cut twine. I wish I had boughta Deere baler instead. “My 1978 Deere small square baler is the best on the market. It ties the bale every time. Works great.”
John Deere threshing machine
1 Best Buy0 Worst Buys“I bought a used 1950 John Deere threshing machine after I overheard the owner talking about it at an auction. I asked him about it and a few weeks later went to check it out. I was pleased with what I saw so I bought it and hauled it home. We use a grain binder to cut oats, and then thresh them with this machine.”
John Deere max-emerge
1 Best Buy0 Worst Buys“Everything on it is well designed,” says Daryl about his 1996 Deere Max-Emerge II 8-row planter. “It does an excellent job of planting. It spaces seeds so evenly that at low dryland populations it looks like the corn rows run in two directions.”
John Deere cuptype seed meters
1 Best Buy0 Worst BuysClinton Brannon, New Hampton, Iowa: Clinton says his Kinze brush type seed meter units “work better than Deere cuptype seed meters for planting soybeans. They plant soybeans (plus cotton and milo) without using air or vacuum, They'll fit Deere Max-Emerge planters and Kinze planters, plus Kinze planter units sold by Buffalo and Black Machine. I bought them a year ago and had a better and more uniform stand. I set the planter onceand planted without having to change them every time I used a different size soybean seed.”
John Deere hammer mill
1 Best Buy0 Worst Buys“My all-time best buy is the 1938 Deere 10-in. hammer mill that my dad bought used several years ago for $30. It’s our Saturday ritual to grind enough feed for two small herds of beef cattle. Currently, we’re feeding 56 5-gal. buckets of feed each week using ground hay, corn, cottonseed meal, cottonseed hulls, and trace minerals. The hammer mill is pto-operated by a 1955 Deere 60 tractor, which is also a best buy. The hammer mill was manufactured the same year my dad was born. The last time we checked, genuine Deere parts were still available for the hammer mill. Dad replaced the hammers with disc blades off a disc mower because they were much less expensive. That’s the only modification we’ve made to the machine. It would be impressive to see the pile of feed that has come out of this mill over the past 20 years or so.
“Our 1964 propane-powered Deere 4020 tractor and 1965 diesel-powered Deere 4020 tractor, which we use in our hay operation, are both best buys. I think the 4020 is the best all-around tractor ever made.”
John Deere mower-conditioner
1 Best Buy0 Worst Buys“My 2020 Deere mower-conditioner was a good purchase. I bought it new, and it had a cracked gearbox when it was delivered. Deere put a new one on with no questions asked. The mower performs really well.
“My worst buy has to be a Claas Lexion 760 combine. These machines are generally great, but the dealer misrepresented the machine and then wouldn’t make it right. The machine was sold as being field-ready. When it was delivered, it had oil running out of it and loose parts that had fallen into the machine. The computer was throwing many error codes.”
John Deere mulcher
0 Best Buys1 Worst Buy“I haven’t had any problems with my 2000 Deere 4100 loader tractor – all I do is change the battery and filters. The front-end loader is really useful.
“One of my worst buys was a Deere mulcher and leaf bagger that I bought to use with this tractor. It didn’t fit the tractor at all. A Deere dealer kept the bagger for a full month without fixing it. I’ve had the unit three years but haven’t used it once.”
John Deere rotary mower overloaded
1 Best Buy0 Worst BuysPaul says he’s “well satisfied” with his 1996 Bush Hog mower. “It does a good job and doesn’t overload my tractor in heavy brush. My 1991 Deere rotary mower overloaded my tractor and pulled hard even when it was standing still with no material in it at all. My low horsepower tractor just plays with the Bush Hog, even in heavy brush and 8 to 9-ft. tall weeds.”
John Deere tractor l owned
1 Best Buy0 Worst BuysChuck Hodel, Eureka, Ill.: “This tractor is the ultimate in design and performance,” says Chuck, owner of a 1981 Steiner S-18 articulated 4-WD 18 hp garden tractor (Steiner Turf Equipment, P.O. Box 85, Orrville, Ohio 44667). “It has hydrostatic drive, big Notation tires, and plenty of power. I can mow 5 ft. wide at high speeds and scrape gravel and dirt like a bulldozer. I've also used it to rake hay and pull wagons around my farm. I can switch implements in 30 seconds. The Deere tractor l owned before didn’t begin to compare to this well-engineered tractor.”
John Deere parts
0 Best Buys1 Worst Buy“With Deere parts, the cost keeps going up while the quality goes down. Their rubber return fuel lines used to last for several years, but the new ones last maybe one or two years. Also, their new fuel filters start to leak practically right out of the box.”
John Deere tech policy
1 Best Buy0 Worst Buys“My 2020 JCB 270T telehandler is a best buy. With the one-arm boom, you can raise something up to work on and get out of the cab. Dealer support has been good. One thing I would have them change is the cab height – it could be 2 to 3-in. lower.
“Deere’s tech policy is a real problem as is their one dealer per region. There’s no competition. How much market share do they have to lose before they change? I put an ACU on my tractor and they had to program it. It was bad and they put four on before they got one that worked. I got charged for programming them because I had put the first one on myself. They also put numerous other parts on that weren’t needed because they could. Guess who paid for them? My next tractor won’t be a Deere.”
John Deere hydra push spreader
1 Best Buy0 Worst BuysDonald Simon, Bowling Green, Ky.: A 1990 Deere hydra push spreader heads Donald's “best buy” list. “It doesn’t have a floor chain so there are no slats for semisolid manure to fall over as on other types of spreaders. When it’s empty it gocs over rough ground without bouncing like other brands do.”
John Deere quick
0 Best Buys1 Worst Buy“My 2003 Kubota 30 hp tractor works great at my small horse training facility.”
On the negative side, “My Deere ‘quick switch’ unit for hooking up to 3-pt. implements is my worst buy. It works great if the implement is perfectly level ground. However, it’s almost impossible to use if the implement you’re hooking up to is on uneven terrain.”
John Deere tractors ranging
1 Best Buy0 Worst Buys“Over the years we’ve owned more than a dozen Deere tractors, ranging from a 1949 ‘A’ to a 2005 6603 and they’ve all been best buys, although some have been better than others. These tractors are operator-friendly, considering when they were built, and they hold their resale value. At present, I have two models that have more than 12,000 hours on them, with no sign of quitting.”
On the “worst buy” side, he lists the Zimmerman water bowls in his tie-stall barn. “For 10 years I bought and installed the company’s updates, but they still flood the barn at regular but unpredictable intervals. I took all the bowls out and put them in the trash where they belong. I wouldn’t recommend these water bowls to anyone.”
John Deere salesman recommended
1 Best Buy0 Worst BuysErling Swiggum, Dodgeville, Wis.: Erling owns a 1990 Case-IH 600 forage blower. “This baby will really handle a lot of material. A Deere salesman recommended it to me. “Another best buy is my 1990 1,000-gal. Mueller bulk milk tank. [t cools milk down to 38 degrees by the time I’m done milking. Reduced my electricity bill, too.”
John Deere quad track
1 Best Buy0 Worst Buys“We used to struggle in the spring with soft conditions and in the fall with wet conditions. With our Deere quad track, we can now sit back and relax a little by doing field work with more ease.”
Matt is less pleased with a Deere high-speed disc. “We are getting hardpans on our ground from running it, resulting in yield losses.”
John Deere a.m.t 626 utility
1 Best Buy0 Worst Buys“My all-time best buy is my 1991 Deere A.M.T. 626 utility vehicle, which the company has since replaced with the Gator. It has been trouble-free. I have bad knees, and this machine has saved me a lot of steps.”
John Deere Easy Change oil and filter system
0 Best Buys1 Worst BuyRichard is pleased with his Harbor Freight Predator gas-powered pressure washer (model 71100). “This pressure washer is only rated at 3,200 psi, but it cleans better than my 5-year-old Troy-Bilt unit rated at 3,400 psi that refused to run anymore. The Predator starts every time on the second pull. The big 12-in. wheels make it so easy to move around the yard. It makes cleaning stuff a lot more pleasurable, and it works great. No more Troy-Bilt.
“Unfortunately, the new Easy Change oil and filter system that Deere is putting on its riding mowers isn’t easy at all. The alignment arrows on the filter and base don’t align as advertised. It makes you wonder if it’s installed right. And at $56, Deere should be ashamed of this setup. Bring back the older spin-on and off filter they used on the 2012 D110 model that I had. With it, you drained all of the old oil for sure, and you didn’t need a filter wrench. Other than that, I love my S130 lawn tractor.”
John Deere z-trac
1 Best Buy0 Worst BuysA 2000 Deere Z-trac F-620 zero turn mower equipped with a 60-in. deck rates as Jim’s “best buy”. “I use it to mow five acres of lawn. It reduces my mowing time by 1 1/2 hours compared to the tractor and mower I had been using. I’ve put more than 250 hours on it with no problems. It’s built heavy with excellent workmanship.”
On the minus side, he lists his 2001 Dodge LST 1/2-ton 2-WD pickup equipped with a 360 cu. in. engine. “This pickup is a big disappointment. It has very little power, rides rough, and is hard on fuel. It gets only about 10 gallons per mile on the highway. Another problem is that if I use it to pull anything the transmission will constantly shift back and forth.”
John Deere eztrak 445 zero
1 Best Buy0 Worst Buys“It’s a high quality tractor that runs strong,” says Ken about his 1983 Deere 950. “No problems.
“My Deere EZTrak 445 zero turn riding mower is an excellent machine. Starts right up and runs great.”
John Deere ztrak
1 Best Buy0 Worst Buys“We purchased a Deere ZTrak Z950R mower with Mulch On Demand. It’s cut our mowing time down from 3 hrs. with a garden tractor to 75 min., and the cut is amazing.
“We also purchased a Deere 2025R tractor with a 2-stage snow blower and radial tires, and we’ve had zero issues with moving all of the snow this winter. Our local Deere dealer always has routine service parts like blades, oil and filters on hand, which is all these Deeres have needed.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.