Milwaukee tools
What FARM SHOW readers say · 31 Best Buys3 Worst Buys · Power & Hand Tools
Milwaukee tools
31 Best Buys3 Worst Buys“My Milwaukee tools are the very best. I’ve had my two 1/2-in. Magnum Hole Shooters for…”
“All of my Milwaukee tools are great buys. I have a weed eater, chainsaw, air compressor…”
“My best buys have been DeWalt and Milwaukee tools. Both brands work great.”
“Milwaukee tools are my best buys. I’m adding to my collection all the time. My latest purchase was the hedge trimmer. One of my batteries wasn’t charging fully. I spoke with a company rep and learned it was out of warranty. He still replaced my battery at no charge. Excellent customer service.”
“I have several Milwaukee battery-powered tools, including a drill, an impact driver, a trimmer and a chainsaw. They’ve all worked well, though I’ve had a couple of batteries go bad.”
Steven’s worst buys are a Maytag washer and dryer purchased at Lowe’s. “They both failed within a year. Within a month, the washer broke. I had it repaired three times in the first year. The next time it failed, along with the dryer, was after the warranty had expired. They both ended up in the iron pile. I’ll never buy anything that says ‘Maytag’ again.”
Mike’s impressed with his Milwaukee cordless tools. “The 1/4-in. impact drive’s 3-in. deck screws through wood like butter.”
“We’ve been using Milwaukee battery tools for over 10 years. They seem to be good quality and durable. Newer models get better and stronger. Some of the units had issues and were hard to get repaired, so we just bought new ones. Batteries are outrageously expensive. Buying a new tool and battery together in a bundle is a good way to get more batteries at a reasonable price.”
“Any and all Milwaukee power tools, corded or cordless, are best buys.”
“I like my Milwaukee tools, especially my M18 impact wrench, which I use when repairing pivot sprinklers.
“My 2022 Jeep Cherokee has too many computer gadgets. It makes driving feel unsafe.”
“A few years ago, I switched to all battery-powered Milwaukee tools. There’s no need for extension cords or air hoses. The 1/2-in. drive impact wrench is very powerful. I also have the 1/4-in. and 3/8-in. impact wrenches, a 4 1/2-in. grinder, drills and a walk-behind mower. I wish my single battery leaf blower had more output, but I feel it performs as advertised.”
“My Deere X350R riding mower does an excellent job, is easy to operate and is better than older riding mowers.
“We continue to buy Milwaukee power tools. There’s none better than those and Stihl.
“My 2022 Ford F-150 XL twin turbo has been trouble-free. I really like to drive it.
“Fifty percent of all Chinese products are no good, even small items like nuts and bolts. What a shame for stores to stock them. They’re no bargain when you can’t use them or they cause extra work.”
“My best buys for my custom fab and repair shop are almost endless. My Val6 medium-sized heater cut my heating costs in half compared to the Ready Heater 120,000-Btu heater I was using. It also produces significantly fewer fumes and is safe for indoor use.
“Milwaukee is my choice for cordless tools. My 1/2-in. high-torque impact has never let me down. My M18 grease gun works quickly on equipment that gets used often. I also use my drill and 1/4-in. impact most days.
“I’m glad I bought my FootPro grinder attachment for my Baldor 1/2-hp grinder (www.farrierproducts.com; ph 800-468-2879). I’ve had zero maintenance in the past three years except for changing belts. I recommend buying the attachment that takes 36-in. by 2-in. belts versus the 24-in. by 2-in. belts like mine. It’ll be easier to get belts.”
“I’ve been using Milwaukee tools for quite some time. They feel good to use, and I feel safer using their batteries and chargers. My most recent Milwaukee purchases were a pole saw, a 14-in. chainsaw, a weed whip with brush blade and hedge trimmer, and a heated vest. The vest quit in less than a year, and Milwaukee gave me a new, updated vest. It works great. The pole saw and chainsaw work even better than the popular brands friends have purchased. The brush cutter and hedge trimmer work great under fences. Worth the extra money.”
“Hands down, Milwaukee cordless tools are best buys on our farm. I’ve used them for 5 years and haven’t had one fail yet, even with daily usage. If Milwaukee makes it, we own it. I can’t imagine going without any of them. Angle grinders, impact wrenches, saws, leaf blowers, sprayers – they’re all great.
“Since 2012, I’ve used propane fuel conversions on six of our farm trucks. The LPG conversion I favor is Prins by Westport Fuel Systems. I’ve used the Prins LPG conversion for 5 years with no issues. I started with ICOM conversions. There are several reasons why I stopped using them. The ICOM needs a special fuel tank, which costs significantly more than a standard automotive LPG tank. I was also having issues with the fuel gauge and control system in the cab. It was cheaply made or not durable. The availability of service was minimal at best.”
“I’ve used Milwaukee tools for years. They’re well-built and last a long time. I’m still using a 3/8 drill I bought in the early 60’s. My 2023 18-volt Hackzall has plenty of power and is very handy. I cut 2 by 4s, 6s and 8s with no problem. The battery lasts quite well. It was pricey but worth it.”
“I like Bosch and Milwaukee cordless tools. You can’t beat the quality of these tools and batteries.
“My 2019 Ford Edge leaks dust so bad that it can be seen in the air when you drive down any gravel road. The dealers can’t or won’t fix it, and the factory representative wouldn’t do anything. We’ve owned many Fords, and still do, but this one’s disappointing.”
“We like our Milwaukee cordless tools (drill, angle grinder and hacksaw). We fabricate sawmill equipment and install it. We use and abuse our tools daily. Sometimes they get dropped 20 to 25 ft. onto the concrete and they keep right on working. If they do stop working, Milwaukee replaces them at no charge.”
“I like Milwaukee tools, but their cordless M18 chainsaw leaks oil like a sieve. It cost almost $500 and cuts well for a long time, but when you’re done cutting, you’d better drain the oil because otherwise it will leak everywhere.
“I bought a Greenworks 60-volt saw for $150 and it’s way better than the M18. For one-third of the cost it cuts better, lasts longer, and doesn’t leak.”
“My son and I used DeWalt tools for 10 years or more until we started using Milwaukee tools. Now when a DeWalt quits, we just throw it in the trash. The red batteries will last four to five times longer. If we use a DeWalt tool, we have to take at least one extra battery along. We probably have at least 25 Milwaukee tools now and keep adding more. The chainsaw is handy and the 1/2 and 3/4-in. impacts really have some power.”
“My best buy is a 1988 Deere 265 lawn tractor that I’ve had for over 15 years.
“All of my Milwaukee power tools (including impact wrenches and drills) are dependable and easy to use.
“My Cannon gun safe is my worst buy. The safe itself is okay, but their customer service is the pits. We had trouble opening it, so we called Cannon. They said to send a picture plus $50. They also needed a certified and notarized letter and then they would send a new code. I did that but have never been contacted by them. I had to go to a private locksmith to open it.”
“Milwaukee battery-powered tools are strong and powerful. We have put away our air and electric-powered tools. The portability of the Milwaukee tools makes them super convenient.
“I’ve used PB Blaster numerous times on rusted nuts with success every time.
“Pittsburgh tools from Harbor Freight are basically ‘one and done’ tools. They’re cheaply made with a high rate of failure.”
“On the best buy side is my collection of Milwaukee tools. I have both corded and cordless and they are all top-notch. An added feature is that if something does go wrong, they are repairable.
“My worst buy is a Portage and Main outside wood burning furnace. The heat exchanger sprung a leak after about six years. The company offered a new heat exchanger, but I would have to pay to ship halfway across the country plus the cost of cutting the furnace apart and rebuilding it with the new heat exchanger. The local fabricator I talked with said he won’t work on that style of furnace any longer as the fix is only temporary.”
“About 3 years ago we received a Roomba robot floor vacuum as a Christmas present, and it’s an awesome product. The little floor mop that comes with it works great, too.
“I’ve been a FARM SHOW subscriber for about 22 years and I don’t remember anyone ever complaining about Milwaukee shop tools. I think they’re the best on the market.”
He likes his 1991 Chevrolet 2500 pickup. “Our dad bought this great pickup used in 2000. No major problems, and the manual transmission makes it a lot of fun to drive.
“We enjoy using our DeWalt and Milwaukee tools. Our Milwaukee M18 impact wrench and M12 hammer drill are best buys.”
“In 1973 I bought a Blackhawk basic mechanic’s hand tool set made by New Britain Machine in New Britain, Conn. The company that has made tools for many other companies over the years. I still use the 3/8-in. ratchet nearly every day. Only a couple of the tools have been replaced due to breakage or wear. Quality hand tools may be more expensive up front but they will last forever and are therefore less expensive in the long run. Buying American-made tools is the way to go, if you can find them.
“A used Deere 630 mower/conditioner I bought 4 years ago replaced a Deere 1360 that I had for more than 10 years. The Deere-built cutterbar on this model is extremely well-built and should last forever. Although I think fluted rollers would offer faster dry-down than the impeller model that I have, I’m pleased overall. I can mow over previously cut windrows without dragging any hay, unlike with ‘red machines’ owned by some of my friends, who have also reported the need to replace pto shafts after several seasons. The one thing I don’t like about this machine is the geometry of the drawbar. The offset bend makes left hand turns difficult, even requiring that the machine be partially opened up to the field position when making sharp left hand turns on the road. That makes the hydraulic swing lock-out safety valve useless.
“I have always had good luck with Milwaukee brand corded electric tools. I still use a 7¼-in. circular saw and a 3/8-in. drill that I have had for nearly 30 years. I also have a hammer drill, sawzall, and a ½-in. VSR drill that have given excellent service over the years. I have several of their 18-volt battery drills and they work well, too. The compact batteries last a long time and they charge quickly. How sad, though, that Milwaukee is no longer an American-owned company. At least the tools are still built in the U.S.”
James likes his Milwaukee battery-powered tools, especially the new “fuel” tools. “They have a lot of power for such a small package and the warranty is 5 years on tools and 2 years on batteries. They once sent me a new tool because it would have cost too much to repair the old one. I had a battery go bad and they sent me a new one. Not many warranties are that good any more. We hardly use our corded or air tools any more. These are so convenient.
“I wouldn’t necessarily call it a worst buy but my Ford F-250 Super Duty with 6.7l diesel gets poor mileage - 15 mpg has been the best with about a 12 mpg average. On the plus side it will pull anything you hook up to it, and the ride is wonderful for a 3/4-ton pickup. I would rather ride in it than our car.”
“All of my Milwaukee cordless tools, which include a drill, impact driver, and circular saw, are best buys. The circular saw is very handy for construction projects where electricity isn’t available.
“My Jonserud chainsaw is reliable and has required only routine maintenance.
“The 4-WD on my Kubota 5100 tractor went out at only about 500 hrs. Also, the tires are thin and flimsy.”
“In 2010 I purchased several Milwaukee cordless tools which have been nothing but reliable. I’ve accidentally dropped my 1/4-in. drive impact wrench and 1/2-in. VSR drill numerous times from various heights, but the tools still never miss a lick. The impact wrench has almost made my air impact wrench obsolete. I’m a contractor and use these tools constantly. All the batteries for these tools still charge up like new and will hold a full charge for months when not in use.
“A friend of mine recently used my drill and got it so hot that he couldn’t touch it with his bare hands (he had gloves on). However, as soon as the tool cooled off it was up and running again without missing a beat.”
“I’ve used my Milwaukee cordless tools for 2 years with no problems. Batteries last 2 weeks, even though I use the tools every day.”
“The new Milwaukee brushless-cordless tools are hard to beat for power and battery life, and they come with a 5-year warranty. I had been using DeWalt tools but they broke down too often.”
Todd owns 5 Takeuchi excavators (ph 706 693-3600; www.takeuchi-us.com). “They’re built strong and have been repair-free.
“I like the Nupla Tools spade shovels I bought at Grainger’s (www.grainger.com). These shovels are almost impossible to break.
“Milwaukee power tools are really dependable.”
“My five corded Milwaukee tools are all best buys. They include three hammer drills, a shear, and a screwdriver. The drills have keyed chucks. All these tools have plenty of power. I believe in paying for top quality tools that last.
“The Titan 18.4 by 26-in. turf tires on my 2006 New Holland 3055 windrower have problems. The sidewalls have split in two places, but the company won’t warranty their tires for sidewall splits. The cost to replace one tire is more than $800. I’d like to buy a Firestone tire to replace it, but no two manufacturers make their tires the same dimensions, even though the tires are all called 18.4 by 26’s.”
“I’m well pleased with my three Milwaukee hand tools which include a 1/2-in. Magnum drill motor, super sawzall, and 4 1/2-in. hand grinder. I’ve used them many hours with no problems.
“My 2004 Ford F-150 pickup and 2000 Mercury car are also best buys.”
Philip M. Broer, Iowa Falls, Iowa: “So far I really like my 1991 Agco Deutz-Allis 9170 tractor. The cab is roomy and quiet, and the air-cooled Deutz engine has plenty of power. This tractor cost a lot less than other brands. However, I wish the company offered a full powershift transmission. “Talso like Milwaukee power tools. Two years ago bought a 1/2-in. drill equipped with a keyless chuck (model 0235-1) and last year I bought a Super Sawzall reciprocating saw (model 6527). I haven't had any problems with either one, and I keep finding new uses for the saw. Both are heavy duty industrial-quality tools.”
Own a Milwaukee? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.