Milwaukee: what farmers say
201 reports in FARM SHOW · 187 Best Buys15 Worst Buys
Milwaukee tools
31 Best Buys3 Worst Buys“My Milwaukee tools are the very best. I’ve had my two 1/2-in. Magnum Hole Shooters for…”
“All of my Milwaukee tools are great buys. I have a weed eater, chainsaw, air compressor…”
“My best buys have been DeWalt and Milwaukee tools. Both brands work great.”
“Milwaukee tools are my best buys. I’m adding to my collection all the time. My latest purchase was the hedge trimmer. One of my batteries wasn’t charging fully. I spoke with a company rep and learned it was out of warranty. He still replaced my battery at no charge. Excellent customer service.”
“I have several Milwaukee battery-powered tools, including a drill, an impact driver, a trimmer and a chainsaw. They’ve all worked well, though I’ve had a couple of batteries go bad.”
Steven’s worst buys are a Maytag washer and dryer purchased at Lowe’s. “They both failed within a year. Within a month, the washer broke. I had it repaired three times in the first year. The next time it failed, along with the dryer, was after the warranty had expired. They both ended up in the iron pile. I’ll never buy anything that says ‘Maytag’ again.”
Mike’s impressed with his Milwaukee cordless tools. “The 1/4-in. impact drive’s 3-in. deck screws through wood like butter.”
“We’ve been using Milwaukee battery tools for over 10 years. They seem to be good quality and durable. Newer models get better and stronger. Some of the units had issues and were hard to get repaired, so we just bought new ones. Batteries are outrageously expensive. Buying a new tool and battery together in a bundle is a good way to get more batteries at a reasonable price.”
“Any and all Milwaukee power tools, corded or cordless, are best buys.”
“I like my Milwaukee tools, especially my M18 impact wrench, which I use when repairing pivot sprinklers.
“My 2022 Jeep Cherokee has too many computer gadgets. It makes driving feel unsafe.”
“A few years ago, I switched to all battery-powered Milwaukee tools. There’s no need for extension cords or air hoses. The 1/2-in. drive impact wrench is very powerful. I also have the 1/4-in. and 3/8-in. impact wrenches, a 4 1/2-in. grinder, drills and a walk-behind mower. I wish my single battery leaf blower had more output, but I feel it performs as advertised.”
“My Deere X350R riding mower does an excellent job, is easy to operate and is better than older riding mowers.
“We continue to buy Milwaukee power tools. There’s none better than those and Stihl.
“My 2022 Ford F-150 XL twin turbo has been trouble-free. I really like to drive it.
“Fifty percent of all Chinese products are no good, even small items like nuts and bolts. What a shame for stores to stock them. They’re no bargain when you can’t use them or they cause extra work.”
“My best buys for my custom fab and repair shop are almost endless. My Val6 medium-sized heater cut my heating costs in half compared to the Ready Heater 120,000-Btu heater I was using. It also produces significantly fewer fumes and is safe for indoor use.
“Milwaukee is my choice for cordless tools. My 1/2-in. high-torque impact has never let me down. My M18 grease gun works quickly on equipment that gets used often. I also use my drill and 1/4-in. impact most days.
“I’m glad I bought my FootPro grinder attachment for my Baldor 1/2-hp grinder (www.farrierproducts.com; ph 800-468-2879). I’ve had zero maintenance in the past three years except for changing belts. I recommend buying the attachment that takes 36-in. by 2-in. belts versus the 24-in. by 2-in. belts like mine. It’ll be easier to get belts.”
“I’ve been using Milwaukee tools for quite some time. They feel good to use, and I feel safer using their batteries and chargers. My most recent Milwaukee purchases were a pole saw, a 14-in. chainsaw, a weed whip with brush blade and hedge trimmer, and a heated vest. The vest quit in less than a year, and Milwaukee gave me a new, updated vest. It works great. The pole saw and chainsaw work even better than the popular brands friends have purchased. The brush cutter and hedge trimmer work great under fences. Worth the extra money.”
“Hands down, Milwaukee cordless tools are best buys on our farm. I’ve used them for 5 years and haven’t had one fail yet, even with daily usage. If Milwaukee makes it, we own it. I can’t imagine going without any of them. Angle grinders, impact wrenches, saws, leaf blowers, sprayers – they’re all great.
“Since 2012, I’ve used propane fuel conversions on six of our farm trucks. The LPG conversion I favor is Prins by Westport Fuel Systems. I’ve used the Prins LPG conversion for 5 years with no issues. I started with ICOM conversions. There are several reasons why I stopped using them. The ICOM needs a special fuel tank, which costs significantly more than a standard automotive LPG tank. I was also having issues with the fuel gauge and control system in the cab. It was cheaply made or not durable. The availability of service was minimal at best.”
“I’ve used Milwaukee tools for years. They’re well-built and last a long time. I’m still using a 3/8 drill I bought in the early 60’s. My 2023 18-volt Hackzall has plenty of power and is very handy. I cut 2 by 4s, 6s and 8s with no problem. The battery lasts quite well. It was pricey but worth it.”
“I like Bosch and Milwaukee cordless tools. You can’t beat the quality of these tools and batteries.
“My 2019 Ford Edge leaks dust so bad that it can be seen in the air when you drive down any gravel road. The dealers can’t or won’t fix it, and the factory representative wouldn’t do anything. We’ve owned many Fords, and still do, but this one’s disappointing.”
“We like our Milwaukee cordless tools (drill, angle grinder and hacksaw). We fabricate sawmill equipment and install it. We use and abuse our tools daily. Sometimes they get dropped 20 to 25 ft. onto the concrete and they keep right on working. If they do stop working, Milwaukee replaces them at no charge.”
“I like Milwaukee tools, but their cordless M18 chainsaw leaks oil like a sieve. It cost almost $500 and cuts well for a long time, but when you’re done cutting, you’d better drain the oil because otherwise it will leak everywhere.
“I bought a Greenworks 60-volt saw for $150 and it’s way better than the M18. For one-third of the cost it cuts better, lasts longer, and doesn’t leak.”
“My son and I used DeWalt tools for 10 years or more until we started using Milwaukee tools. Now when a DeWalt quits, we just throw it in the trash. The red batteries will last four to five times longer. If we use a DeWalt tool, we have to take at least one extra battery along. We probably have at least 25 Milwaukee tools now and keep adding more. The chainsaw is handy and the 1/2 and 3/4-in. impacts really have some power.”
“My best buy is a 1988 Deere 265 lawn tractor that I’ve had for over 15 years.
“All of my Milwaukee power tools (including impact wrenches and drills) are dependable and easy to use.
“My Cannon gun safe is my worst buy. The safe itself is okay, but their customer service is the pits. We had trouble opening it, so we called Cannon. They said to send a picture plus $50. They also needed a certified and notarized letter and then they would send a new code. I did that but have never been contacted by them. I had to go to a private locksmith to open it.”
“Milwaukee battery-powered tools are strong and powerful. We have put away our air and electric-powered tools. The portability of the Milwaukee tools makes them super convenient.
“I’ve used PB Blaster numerous times on rusted nuts with success every time.
“Pittsburgh tools from Harbor Freight are basically ‘one and done’ tools. They’re cheaply made with a high rate of failure.”
“On the best buy side is my collection of Milwaukee tools. I have both corded and cordless and they are all top-notch. An added feature is that if something does go wrong, they are repairable.
“My worst buy is a Portage and Main outside wood burning furnace. The heat exchanger sprung a leak after about six years. The company offered a new heat exchanger, but I would have to pay to ship halfway across the country plus the cost of cutting the furnace apart and rebuilding it with the new heat exchanger. The local fabricator I talked with said he won’t work on that style of furnace any longer as the fix is only temporary.”
“About 3 years ago we received a Roomba robot floor vacuum as a Christmas present, and it’s an awesome product. The little floor mop that comes with it works great, too.
“I’ve been a FARM SHOW subscriber for about 22 years and I don’t remember anyone ever complaining about Milwaukee shop tools. I think they’re the best on the market.”
He likes his 1991 Chevrolet 2500 pickup. “Our dad bought this great pickup used in 2000. No major problems, and the manual transmission makes it a lot of fun to drive.
“We enjoy using our DeWalt and Milwaukee tools. Our Milwaukee M18 impact wrench and M12 hammer drill are best buys.”
“In 1973 I bought a Blackhawk basic mechanic’s hand tool set made by New Britain Machine in New Britain, Conn. The company that has made tools for many other companies over the years. I still use the 3/8-in. ratchet nearly every day. Only a couple of the tools have been replaced due to breakage or wear. Quality hand tools may be more expensive up front but they will last forever and are therefore less expensive in the long run. Buying American-made tools is the way to go, if you can find them.
“A used Deere 630 mower/conditioner I bought 4 years ago replaced a Deere 1360 that I had for more than 10 years. The Deere-built cutterbar on this model is extremely well-built and should last forever. Although I think fluted rollers would offer faster dry-down than the impeller model that I have, I’m pleased overall. I can mow over previously cut windrows without dragging any hay, unlike with ‘red machines’ owned by some of my friends, who have also reported the need to replace pto shafts after several seasons. The one thing I don’t like about this machine is the geometry of the drawbar. The offset bend makes left hand turns difficult, even requiring that the machine be partially opened up to the field position when making sharp left hand turns on the road. That makes the hydraulic swing lock-out safety valve useless.
“I have always had good luck with Milwaukee brand corded electric tools. I still use a 7¼-in. circular saw and a 3/8-in. drill that I have had for nearly 30 years. I also have a hammer drill, sawzall, and a ½-in. VSR drill that have given excellent service over the years. I have several of their 18-volt battery drills and they work well, too. The compact batteries last a long time and they charge quickly. How sad, though, that Milwaukee is no longer an American-owned company. At least the tools are still built in the U.S.”
James likes his Milwaukee battery-powered tools, especially the new “fuel” tools. “They have a lot of power for such a small package and the warranty is 5 years on tools and 2 years on batteries. They once sent me a new tool because it would have cost too much to repair the old one. I had a battery go bad and they sent me a new one. Not many warranties are that good any more. We hardly use our corded or air tools any more. These are so convenient.
“I wouldn’t necessarily call it a worst buy but my Ford F-250 Super Duty with 6.7l diesel gets poor mileage - 15 mpg has been the best with about a 12 mpg average. On the plus side it will pull anything you hook up to it, and the ride is wonderful for a 3/4-ton pickup. I would rather ride in it than our car.”
“All of my Milwaukee cordless tools, which include a drill, impact driver, and circular saw, are best buys. The circular saw is very handy for construction projects where electricity isn’t available.
“My Jonserud chainsaw is reliable and has required only routine maintenance.
“The 4-WD on my Kubota 5100 tractor went out at only about 500 hrs. Also, the tires are thin and flimsy.”
“In 2010 I purchased several Milwaukee cordless tools which have been nothing but reliable. I’ve accidentally dropped my 1/4-in. drive impact wrench and 1/2-in. VSR drill numerous times from various heights, but the tools still never miss a lick. The impact wrench has almost made my air impact wrench obsolete. I’m a contractor and use these tools constantly. All the batteries for these tools still charge up like new and will hold a full charge for months when not in use.
“A friend of mine recently used my drill and got it so hot that he couldn’t touch it with his bare hands (he had gloves on). However, as soon as the tool cooled off it was up and running again without missing a beat.”
“I’ve used my Milwaukee cordless tools for 2 years with no problems. Batteries last 2 weeks, even though I use the tools every day.”
“The new Milwaukee brushless-cordless tools are hard to beat for power and battery life, and they come with a 5-year warranty. I had been using DeWalt tools but they broke down too often.”
Todd owns 5 Takeuchi excavators (ph 706 693-3600; www.takeuchi-us.com). “They’re built strong and have been repair-free.
“I like the Nupla Tools spade shovels I bought at Grainger’s (www.grainger.com). These shovels are almost impossible to break.
“Milwaukee power tools are really dependable.”
“My five corded Milwaukee tools are all best buys. They include three hammer drills, a shear, and a screwdriver. The drills have keyed chucks. All these tools have plenty of power. I believe in paying for top quality tools that last.
“The Titan 18.4 by 26-in. turf tires on my 2006 New Holland 3055 windrower have problems. The sidewalls have split in two places, but the company won’t warranty their tires for sidewall splits. The cost to replace one tire is more than $800. I’d like to buy a Firestone tire to replace it, but no two manufacturers make their tires the same dimensions, even though the tires are all called 18.4 by 26’s.”
“I’m well pleased with my three Milwaukee hand tools which include a 1/2-in. Magnum drill motor, super sawzall, and 4 1/2-in. hand grinder. I’ve used them many hours with no problems.
“My 2004 Ford F-150 pickup and 2000 Mercury car are also best buys.”
Philip M. Broer, Iowa Falls, Iowa: “So far I really like my 1991 Agco Deutz-Allis 9170 tractor. The cab is roomy and quiet, and the air-cooled Deutz engine has plenty of power. This tractor cost a lot less than other brands. However, I wish the company offered a full powershift transmission. “Talso like Milwaukee power tools. Two years ago bought a 1/2-in. drill equipped with a keyless chuck (model 0235-1) and last year I bought a Super Sawzall reciprocating saw (model 6527). I haven't had any problems with either one, and I keep finding new uses for the saw. Both are heavy duty industrial-quality tools.”
Milwaukee 18-volt hand tools
21 Best Buys2 Worst Buys“I recently switched to Milwaukee 18-volt hand tools with 5Ah batteries. I have the 1/2-in. drill driver, 1/2-in. impact wrench, pole saw, and leaf and dust blower. All the tools have performed well.
“I am, however, disappointed in the blower. I bought it on sale to replace a corded blower, but even with a fully charged battery, I only get 10 to 15 min. of continuous use before it discharges the battery. Now, I only use it to blow off tractors and equipment. I had to buy another corded blower to use for longer jobs. I don’t see how you could blow many leaves with it.”
“Last year, I bought a Milwaukee 18-volt compact leaf blower. I use it to clean my gutters and blow light snow off my deck and pickup. I’m very satisfied with this product. I have other Milwaukee tools, and they’re all good products.”
Richard isn’t satisfied with his 2014 Big Dog 54-in. zero-turn tilt-deck mower. “It has less than 200 hrs. on it. It’s had various electrical problems, some related to the tilt deck. It was out of service for two months Then the mower wouldn’t start. I finally bought another mower to replace it.”
“My Milwaukee 18-volt battery-powered chainsaw has as much power as a gas-powered saw but with much less maintenance.”
“I’ve been pleased with my 2021 Milwaukee 18-volt string trimmer (model 2828-20). This trimmer is a well-balanced workhorse. It came with a 6 Ah battery pack and charger. With its brushless technology for the motor, it does a lot of trimming between charges. I’m impressed by its overall quality and quiet operation.”
Allan isn’t as happy with his 2022 Freeman 20-volt 18-gauge brad nailer (model PE20VBR50). “This nailer is heavy, weighing over 8 lbs. with the battery. At the maximum force setting, it didn’t drive 1 3/4-in. brads below surface level through 1/2-in. oak trim, requiring a two-handed operation to do even that. After using it for a short time, I reverted to my air-driven Senco brad nailer to finish a job.”
“My ‘best buy’ has been my Milwaukee 18-volt drill/driver set. It was a package deal – drill, driver, charger and two batteries with a third thrown in free at our local co-op. I’ve built a chicken house and garage, put on two roofs, built a board fence, and done many small jobs. I’ve put one set of brushes in the drill and am still using the same batteries.
“My ‘worst buy’ is a Hoss Tools push planter. We are market gardeners and were looking for something for small seeds. This thing is too bulky to use in our tunnels. It’s also hard to transport; the best way is to flip it over on its front wheel, then you have to make a second trip with seeds and extra plates. You can’t see or hear the seeds fall so you don’t know if it’s planting or not and changing the plates is a major pain. We have a 40-year-old Earthway planter that we can carry to the field with one hand and seeds and supplies in the other.”
“I bought a Milwaukee 18-volt grease gun two years ago and am very pleased with it. It’s fast, has great pressure, and never has an issue with air locking after a cartridge change. The long hose is nice for reaching remote fittings.”
A Milwaukee 18-volt oscillating Multi-Tool rates as Larry’s “best buy”. “It works great for putzy jobs like working on door casings without having to remove the door trim when the new flooring is thicker than the old. It also works excellent for detail sanding.”
“I own several Milwaukee 18-volt cordless tools including a string trimmer, leaf blower, and 1/2-in. drive impact wrench, and they all work excellent. The impact wrench works so well that I don’t even use my air impact wrench anymore. In fact, these cordless tools have replaced almost all my air-powered tools.”
“I like Milwaukee 18-volt tools and rarely even use air tools any more.
“I’ve found that Amerseal Tire Sealant will seal most tire punctures, which saves a lot of time and money. I use a chart to pump in the correct amount of sealant, and the tire is fixed. It’s available on Amazon.com and at many retailers.”
“My Milwaukee Fuel 18-volt, 1/4-in. cordless impact driver works great. Most of the company’s Fuel class tools work great – they’re lightweight, built strong, and last a long time.
“My Milwaukee 18-volt cordless grease gun was an exception, though. It was defective so the dealer sent it back for repairs. The company sent a new grease gun but it didn’t work either, so the dealer sent it back and gave me a replacement. However, I’m still not getting the hang of using this tool and since a lot of the bearings are enclosed and sensitive to the amount of grease being applied, I’ve scrapped it and gone back to a tried-and-true hand pump grease gun. I own many Milwaukee cordless tools that work great, but this isn’t one of them.”
“I like my 2018 Milwaukee 18-volt cordless tools which include a big impact wrench, small impact drill, and reciprocating saw. All have plenty of power and batteries that last a long time. The impact wrench is superb and the saw is really handy. I use it a lot more than I thought I would.”
“My 2015 Bosch 18-volt cordless drill replaced a smaller, worn-out model. Cordless drills get a lot of hard use in my business – we make sheep feeders - and this one has performed flawlessly.
“My 2013 Milwaukee 18-volt cordless drill worked good for a couple years until the trigger assembly failed. It would have cost about $80 to replace, so instead I bought the Bosch.”
Mervin’s impressed with his 2019 Milwaukee 18-volt hammer drill/driver kit. “I recently used it with a hole saw to drill 4-in. dia. holes through 1 1/2-in. thick lumber, and it exceeded my expectations. This tool has a lot of power and torque for a variety of applications.
“My 2012 Caterpillar 236B3 skid loader has plenty of power and is handy for many jobs around the farm.”
“My Milwaukee 18-volt cordless 1/2-in. impact wrench is far superior to my DeWalt model. I’ve never found a wheel lug nut that it can’t remove, no matter how big the nut is.”
He’s happy with his Milwaukee 18-volt, 1/2-in. drive brushless impact wrench. “It’s compact yet powerful and comfortable to operate. Also, I like not having to drag an air hose around with it.”
“My 2015 Milwaukee 18-volt brushless, 1/2-in. impact wrench has unbelievable torque and can remove almost anything. I don’t know how I ever got along without this tool. When we have work to do, it’s the first tool we grab.”
“My 2016 Milwaukee 18-volt lithium ion 1/2-in. impact wrench has more power than my air impact wrench. It can easily change all 4 tires on my pickup and do a brake job on one battery charge.
“My Milwaukee grease gun can go through 4 or 5 tubes of grease on one battery charge.
“Rust Bomb is the best penetrating oil I’ve ever used (www.conklin.com). It just eats up rust and makes PB Blaster look like it’s made of water.
“I think the quality of Harbor Freight tools has improved.”
On the “worst buy” side, he lists his Sears Craftsman ratchet wrenches and screwdrivers. “The ratchet wrenches have big-toothed gearing that doesn’t hold up to heavy use, and their screwdriver tips break even if you’re turning the screwdriver by hand.”
He’s happy with his Milwaukee 18-volt high-torque, 3/4-in. drive impact wrench which produces up to 750 lbs./ft. of torque. “This tool has guts. It beats air impact wrenches for its light weight, great torque, portability, and ease of use. I use it every day to change the knives on a big wood chipper, and have to loosen and retorque 27 3-in. long bolts to do the job. Yet I can loosen and retorque the bolts to 465 lbs./ft., without using up more than half the battery’s capacity. I think every farmer should own this tool.”
“I like my Milwaukee 18-volt cordless tools and the batteries that power them. Ever since the company replaced 14 different batteries on my cordless tools because of a recall, not one battery has died. Altogether I have more than 24 Milwaukee tools and like all of them. I seldom buy another brand.
“My 1999 International 4700 single axle truck equipped with a 444 cu. in. engine lacks power. This truck has only about 17,000 miles on it but has had many problems. First the fan thermostat quit working which caused the engine to overheat. Then the instrument panel quit working and cost $800 to fix. I only drive this truck when necessary in order to avoid more repairs. The overhead bin for papers doesn’t work – what ever happened to glove compartments? I also had to replace the starter.”
Ryan’s the satisfied owner of a Milwaukee 18-volt, ½-in. cordless drill that operates on Lithium Ion batteries. “It has a lot of power and the batteries charge quickly, in less than an hour. Also, the batteries last a long time between charges. The best part is the batteries have power indicator lights, which let me know how much power is left in the battery.”
“I like my Milwaukee 18-volt cordless drill and sawzall. The Milwaukee line of tools outperforms and outlasts all other brands that I’ve tried. They’re built rugged and can take a lot of abuse. They have a lot of torque, and the batteries seem to last longer than on most other brands.”
A 2003 Milwaukee 18-volt cordless drill rates as Harlan’s “best buy”. “This drill has hundreds of trouble-free hours on it. It has a lot of power, and the batteries last a long time before they have to be recharged. It’s also very durable - it has fallen down numerous times without ever cracking the casing. If it ever wears out I’ll buy another one.
“Seven months after I installed my Zartman cow mattresses the cover got holes in it and some of the rubber flattened out. I paid top dollar for these mattresses, taking the dealer’s word that they’d be trouble-free. On the positive side, they were very comfortable while they lasted.”
Milwaukee M18 cordless drill
16 Best Buys1 Worst BuyThurman’s had good luck with his Milwaukee M18 cordless drill (model 2804-20). “I replaced some deck boards on my patio and drove 498 3 1/2-in. screws with one battery charge. I have 11 other M18 tools (impacts, saws, inflators and grinders). They’re a bit more expensive and heavier, but they always work, which is why I keep buying them.
“Unfortunately, I made the mistake of buying a Harbor Freight Bauer 20V angle grinder. It’s a brushless model with electronic controls. If I apply any pressure, it stops running. I have to release the trigger, count to two, and it starts again. It does this consistently. I do repair work, so it’s basically unusable.”
Marc is impressed with his Craftsman V20 1/2-in. drive impact wrench he bought this year. “Since getting it, I haven’t used an air or corded electric impact wrench. It’s powerful, as well as smaller and lighter. The battery lasts a long time before needing a charge.
“My Milwaukee M18 cordless grease gun has made greasing tractors, implements, and vehicles quicker and easier. I haven’t used a handheld lever or pistol grip grease gun since getting the M18. The battery also lasts a long time.”
Marc is disappointed with his Alabama-built Turf Pride G-157 finish mower. A local Kubota dealer sold it. “The mower was purchased new. The belt would crack badly after mowing two to four acres. It came with a Gates industrial V-belt. It had mowed only the grass in the yard. The dealer was of no help in correcting the problem. I fixed it by installing a deck belt for a Skag mower and a softer spring on the idler pulley. Before I fixed it, it had several of the Gates belts.”
Colin’s impressed with his 2022 Milwaukee M18 tool system. “My battery grease gun failed after several years of spoiling me. I came across a sale at Acme Tools, where I found an M18 Milwaukee kit that included a grease gun and a high-torque 1/2-in. impact. Since I wanted the grease gun and the price was excellent, I bought it. The grease gun is so much better than my old one. It has many nice features. The impact was a surprise. It has more power than I expected, and the battery life is excellent. I’ve since added several M18 tools to my toolbox.
“I’ve discovered that any Harbor Freight pump is a worst buy. They don’t have parts for many of their products, and if a pump fails, they have a special return policy that includes restocking fees, even if the item is only a few days old.
“I purchased a transfer pump and a booster pump to move water over a distance. The transfer pump overheated and slowed to a trickle, even with a booster pump taking some of the strain. The booster pump only moved clear water, which went through the extra pump vane in too short a time, and none were available at the store.”
“As I’ve gotten older, and hopefully wiser, my mantra is now ‘buy once, cry once.’ My arsenal of Milwaukee M18 and M12 battery-operated power tools, my Stihl gas-powered equipment (chainsaws, blowers and trimmers) and Gearwrench hand tools have all proven their worth and investment (www.gearwrench.com).”
“I’ve used my Milwaukee M18 inflator countless times. Even on a flat combine tire. This alternative to buying a gas-powered air compressor works in a pinch when miles from home.”
“Having tried other electric grease guns, the Milwaukee M18 grease gun can’t be beat. It’s been flawlessly operated for several years now, and it’s perfect for my farm operation. I liked it so much that I now have two. Highly recommend.”
“All of my Milwaukee M18 tools are best buys. Since buying my 1/2-in. drive impact, I haven’t used either of my air impacts. I haven’t found anything it can’t break loose. The 6 1/2-in. circular saw is just as capable as my old Skil worm drive saw and is much lighter.
“My local Ace Hardware is a big Milwaukee dealer, so by watching the upcoming deals, I’ll get a tool, and then a six or eight-amp battery is free. Those usually are $200 each. I also get Ace Rewards coupons for $10 or $20 off, which reduces the cost even more. I recently bought a Milwaukee M18 pole saw for limbing trees in my pastures and yard. I’m very impressed with it. It’s just as capable as a gas one without the noise.
“All of my Stihl products are also best buys. My 039 chainsaw was purchased in the 1990s and is still going strong. I recently bought a mid-size Stihl battery power saw for pruning trees and building fences, and it works well.”
“My 2021 Milwaukee M18 18-in. battery-powered chainsaw cuts well. The battery is good for hours of use. I use it for trimming tree branches or cutting down 2 to 3-in. trees. It’s a little heavy but is a great tool.
“My 2018 Buick Century 4-cyl. 4-door hatchback sedan is a great car. The hatchback is very useful, especially with a backseat that folds down. It handles well with incredible acceleration and gets 30 mpg. It’s roomy enough for four people.
“I own two Deere lawn mowers (265 and 325) that were purchased used. Both are great mowers. I’ve had no trouble, and they’ve only needed routine maintenance over 10 years of use.”
“We like our Snap-on tools because they are made in the U.S.A. with quality components and built to last.
“Milwaukee M18 battery impacts are also strong and last long.”
“Our 2006 Kioti CK30 HST was ‘bulletproof’ except for an oil cooler that leaked. It was an awesome little tractor. I hope the 2019 CK4010SE HST with cab has as good a record.
“My Milwaukee M18 reciprocating saw with lithium XC 5.0 battery is a real brute with a long run time. It’s comfortable to hold and cuts well with Diablo metal blades. I even use it for pruning trees.
“My wife bought a used 2017 Acura RDX that she is really pleased with – no issues so far.”
“I have purchased several Milwaukee M18 tools in the last six years, including a 1/2-in. hammer drill, a 1/4-in. impact driver, a side grinder, impact drawer and circular saw. All work well and the batteries last a long time before charging.
“Stihl products (chainsaws, backpack leaf blower and weed eater) all start easily and do an excellent job. I’ve had no problems with any of them.”
A MR COOL 24kBTU heat pump is a “best buy” for Patrick (www.northerntool.com). “This do-it-yourself heat pump is great in my detached garage workshop. It’s easy to install, runs silently, and cools my 24 by 48-ft. shop to 76 degrees even in 95 degree heat. Not just A/C, it also makes heat in the spring and fall. Runs very efficiently. It’s way better than a window A/C unit. A must have product.
“The Milwaukee M18 backpack sprayer has a bad design so there is always leftover spray. The replacement seals and O-Rings are not available, so once it starts to drip (mine leaked after one year) you have to throw away the tank and wand and buy a new one. For $400, you would expect to get a product that could be repaired. If you want a junk sprayer, get a cheaper one not a $400 junk sprayer.”
“I like my Milwaukee M18 power tools and my Montezuma portable tool box (www.montezumastorage.com). I have the Milwaukee impact tools, angle grinder and grease gun. These tools are high performace. However, I have had some issues with electronics. The toolbox has worked out very well for me. I like the way it makes all tools easily accessible.”
Glenn likes his Milwaukee M18 cordless 1/2-in. impact wrench. “It has plenty of power enough to twist off 9/16-in. bolts - and the batteries last a long time. My M18 cordless drills work just as good.
“My Toro 5000 zero-turn riding mower equipped with a Kohler EFI engine does a good job of mowing, but the engine doesn’t want to start in colder weather. It turns over for a while, then fires and dies repeatedly before it eventually will run. The dealer replaced the fuel pump and reset the engine control module, then said the engine was ready to go. I got the machine home and let it set for a couple of weeks, but when I tried to start it the same problem happened again.”
“I use my Milwaukee M18 brushless Hackzall reciprocating saw on both wood and metal, and find that it reduces my pruning time by two thirds or more. The batteries last a long time, and are interchangeable with the company’s M18 cordless drills and impact wrenches.
“I installed a Trimble EZ Steer assisted steering system on my old Steiger tractor. The system turns the steering wheel for you by combining a friction wheel and a motor with guidance from any compatible Trimble display. It worked so well that I also bought a system for my White 155 tractor, which I use with our soybean planter.”
On the minus side, he lists his Raven Cruizer II SmartSteer auto steering system. “We had constant problems getting the light bar to work with the steering node. The company should have recalled this product. I was constantly on the phone talking with various dealers, tech people, and Ag Express Electronics. The Raven system did a good job when it worked, but unfortunately it worked only about 40 percent of the time.”
“In 2013 I bought a 6-tool cordless Milwaukee M18 tool kit, and every tool still works like new except for the hammer drill. The motor on it burned out, but the company replaced the motor as well as the chuck. The problem with the chuck was our fault.”
“It’s the best money I’ve spent in years,” says Benny about his Milwaukee M18 cordless grease gun. “I own 2 tractors with a lot of implements, as well as a backhoe, so I have a lot of grease fittings to service. I’ve tried manual pumps and also air-operated grease guns, but nothing works as well as my cordless Milwaukee.
“Everything on my Oregon Scientific WMR86 wireless weather station works good except for the outdoor temperature module, which quit working after one week. I replaced the batteries and reset the unit several times, but it didn’t help.”
Milwaukee (general)
13 Best Buys1 Worst Buy“In the last two years, I’ve purchased several items I consider to be best buys. First among these is an EGO 56-volt weed eater with an automatic line feeder system. This line feeder is far better and easier to use than the old spool system. This feature alone makes the tool an outstanding buy. I recently bought an EGO 56-volt blower, which is great as well.
“I also have two Milwaukee best buys that I’ve found very helpful. The first is a 48-in. stick transfer pump with an M12 battery that I use to empty stock water tanks before cleaning. It’s much easier than bailing out the dirty water with a bucket. In 2025, I bought an 18V hedge trimmer with a 24-in. bar. It makes trimming almost easy.”
“I’m retired and have quite a few battery-powered tools. I’m old, but not ready to throw in the towel. Milwaukee, by far, is the best. My 18-volt chainsaw is my favorite. My 12-volt saw is also great, but it’s a problem for my 77-year-old hands. My RIDGID tools are also great and less expensive. Best of all, they have a lifetime guarantee. When a few of the batteries that I’d purchased with the tools died, RIDGID replaced them. Bottom line, I’d choose Milwaukee for earning a living and RIDGID for homeowners and lighter-duty uses.”
A Deere 4044M tractor with D170 loader, iMatch Quick-Hitch, and pallet forks is a “best buy” for John. “My 440M is a great all-around workhorse. The pallet forks save my back, and the Quick-Hitch makes hooking up implements much easier.”
John also likes Stihl products. “Stihl saws have been a ‘best buy’ since I bought my first one while still in high school in 1977. I have an 039 that I bought in the mid-1990’s that is still going strong. Our battery-powered leaf blower is a huge improvement over the gas-powered ones.”
On the negative side are drill bits by DeWalt and Milwaukee. “If you are only drilling wood, they are acceptable. For drilling even thin steel they are so brittle they break constantly. They don’t begin to compare to drill bits made 20 to 30 years ago. If I wanted cheap junk, I would buy bits at Harbor Freight. I’ve actually had better luck with their cheap bits than I’ve had with the name brands. At least if they break, I expect it.”
“My Milwaukee 7-in. side grinder is my best buy. After two years of heavy use, it shot sparks out of the motor vents and lost power. I boxed it up and sent it to a company service center. In less than a week they sent it back to me prepaid with a new armature and brushes. It was covered by the warranty so they didn’t charge anything. Milwaukee power tools may cost a little more, but they’re definitely worth it.
“My Deere 9500 combine, which I bought used, is my worst buy. The company found out they had some combines with soft crank-shafts under the straw walkers and implemented a cost-share program to replace them. It turned out the previous owner didn’t participate in the program so the combine sat on the dealer’s lot for most of the program’s duration. We used this combine for two years before we even knew about the crankshaft problem. By the time we found out about it, the program had expired and the dealership changed hands. Our only recourse was with the company, but a factory block man said he couldn’t help us. We’re disappointed the company wouldn’t stand behind this product.”
Paul Hansucker, Polson, Mont.: "My Ezee-On 1201 offset disk is well-designed and well-built (5110 62nd St., Vegreville, Alberta, Canada T9C 1N6). The company used good heavy materials to build it. It's easy to adjust and does a good job." Steve Dittoe, Somerset, Ohio; "My 1989 Deere 850 MFWD tractor is my best buy. I've used it to do everything from moving round bales to cultivating corn, yetit's small enough to mow my yard. It's one of the most used tractors on our farm. We've never had any problems with it.” On the minus side, Steve lists his Skil 4 1/2-in, angle grinder. "It doesn't run smooth atall. I've only used it to do a couple of jobs butitalready acts like the bearings are going out. Next time I'll spend more money and buy a Milwaukee.”
Lloyd Conrad, Greenfield, Wis.: Lloyd's pleased with metal shed roof paint made by Solar Paint and Varnishes, Inc. (Milwaukee, Wis. 53221). We used iton the roof of our metal shed which was becoming badly pitted. The paint cost $55 per gal., but it was worth the expense compared to the time and money it would have taken to install a new roof.”
Michael French, Dixon, Mo: He's happy with his 1988 Ford F-150 pickup. “The 6cyl. fuel-injected engine and 5-speed overdrive has plenty of take-off power and gets good gas mileage, too. It’s a good allaround truck although we do our heavy trailer towing with our 1983 Ford F-350 with a 6.9 diesel.” On the minus side, Michael’s unhappy with his Homelite Super EZ chainsaw with sprocket tip bar. “I purchased the saw for fencing chores and right-of-way maintenance. In small brush you spend more time putting the chain back on than you do sawing, regardless of how much you tighten it. The fuel tank should be larger - after putting the chain on a couple times, you're out of gas.” “Milwaukee power tools are also best buys as far as I’m concermed. I have a portable grinder, model U179, that’s been worked hard for 42 years. I have a new Milwaukee circular saw, a drywall screw shooter, anda 12-volt drill for tapping sugar maples. All are top-flight tools.”
Leonard Dicke, Sheridan, IIl.: “We love our Big Stinky fly uap (J.L. Price Products, P.O. Box 9, South Milwaukee, Wis. 53172) with gal. glass jar. It uses a special scent to draw flies into a I-gal. plastic jug, where they die, We fill itup once aweek. There are no longer any flics around the house.”
Paul Nottingham, Nunica, Mich.: “My 1/2-in. Milwaukee electric drill motor is expensive but rugged. I ran over it with a pickup but didn’t hurt it. It can be operated steady for over an hour honing a cylinder block and hardly get warm.” He’s not as happy with his Sears Craftsman micro-torque click-stop torque wrench. “From the beginning, it failed to click when set torque was reached. I sent it back to factory for repair. Two months later got it back and it did exactly the same thing as before. I threw it away.”
Moose Lake, Minn.: “This heavy duty industrial tradesman tool is unbeatable for use in the shop and around the farm. Never overheats and will drill 2-in. holes in wood all day,” reports Paul, pleased with his Milwaukee %-in. Hole Hawg model drill.
Lawerance Podhajsty, Traer, Iowa: He’s happy with his Milwaukee 4% in. sander grinder. “Plenty of torque and power, real handy to use.’ He dislikes “super glue", however. “I can't get it to hold anything when I need it.”
Neal Knip, De Motte, Ind: Neal's happy with Milwaukee polishers and grinders. ‘‘These are industrial strength small shop tools built to stand up to lots of use. The guarantee is good, and so is the service, when needed. “By the same token,” continues Neal, ‘‘we bought a Wen grinder that lasted one hour. We exchanged it for another that lasted one-half hour. We sent it in for repair and it didn’t even run when it came back, so we tossed it in the scrap pile. It was a cheaper grinder but in the end, it was a lot more expensive. Bargain drill bits and other shop tools are no bargain,” Ashley C-60 Automatic Wood Heater: This stove has cut our heating oil bill to practically nothing,” reports an unnamed FARM SHOW reader. ‘We set our conventional furnace at 65° and the only time it comes on is early in the morning if the temperature drops well below zero. You never have to light the stove because it holds its fire overnight. Just pile on more wood, “This round baler is probably no better than any other round baler. It's the bales themselves like,"' continues the reader, adding New Holland's 851 big round baler to his “best buy” list. “It's a great way to make hay, saving tremendous amounts of labor over conventional methods, and gives me a chance to enjoy my summer much more.”
Lloyd G. Bartelt, Woden, Iowa: “This is a good shop drill, but it’s not - working for me because OSHA removed the button that locks the power switch on,’ reports Lloyd about his Milwaukee 1/2-in, power drill. ‘I want to use the drill in my small drill press, but how do you hold the switch on, pull down the press lever and pump oil on the iron and bit — all at the same time with two hands? understand OSHA had the switch removed because they felt it was a safety hazard,"’ says Lloyd. He’s happy with his John Deere 7000 planter. ‘Does everything they said it would — plants at a good, uniform depth and it's easy to change plant population. wouldn’t want to be without the monitor.”’
Daniel Wolf, Stewartstown, Pa: “Fraudulent schemes and donothing products are over-abundant, It seems to be open season on farmers, but I'm learning how to duck,” says Daniel. ‘In the past year, bought colored water labeled soil conditioner, a Milwaukee tool that was made in Japan, and a membership in a group-purchasing co-op that couldn't get the things wanted. I've learned that if it seems too good to be true, it probably is.” On the plus side, Daniel is happy with Roundup herbicide. “I planted soybeans in a field where Canada thistle was practically the only vegetative cover. Spraying followed immediately using Roundup plus residual herbicides, The thistles died and the beans yielded about 45 bu. per acre,”
Milwaukee 1/2-in impact wrench
6 Best Buys1 Worst BuyEdwin’s impressed with his 2019 Pequea Plantmaster 614 6-row corn planter (ph 717 442-4406; www.pequeaplanter.com). “I like how they patterned this planter after a Deere 7200 model, but borrowed ideas from other brands as well. The planter is less than 14 ft. wide going down the road. I’d recommend it to anyone.
“I don’t think I could operate our farm without our Milwaukee 1/2-in. impact wrench. We’ve had good luck with all our Milwaukee power tools.”
“My Milwaukee 1/2-in. cordless impact wrench saves time compared to using an air-operated tool. I just squeeze the trigger and go. It’s one of my favorite tools.”
“I own many DeWalt cordless tools and like them. However my son recently bought a new Milwaukee 1/2-in. impact wrench, and we’re amazed at how much power it has.”
“I’ve had good luck with my 2018 Milwaukee 1/2-in. impact wrench, a high torque model that’s rated at 1,000 ft. lbs. It can easily handle lug nuts on pickups and tractors, and even on semi trucks. It comes with 2 batteries that last a long time. It also has an excellent warranty.”
“My Milwaukee 1/2-in. high torque impact wrench delivers up to 1,100 ft.-lbs. of nut-busting torque.
“I started using Schaeffer’s Specialized Lubricants engine and gear oil in my bulldozers and track loaders way back in 1960 and have used it ever since (www.schaefferoil.com; ph 800 325-9962). The first bulldozer I used it on was a Cat D4. I’ve also used it on Cat D2 and D4C dozers; on Komatsu D37E, D41-P, and D51 dozers; and on an 850E track loader – and I’ve never had an engine failure on any machine.”
Lowell’s “worst buy” is his Milwaukee 1/2-in. hammer drill equipped with a German-made Rohti chuck. “Even with only average use the Rohti chuck will fail. Sears, DeWalt, Bosch and others have all used this same chuck. It won’t hold tight on bits and will rapidly deteriorate in performance until it fails totally. I’ve used this chuck on several different brands of hammer drills. I wrote to several of the manufacturers but got no response.
“While working in a feed mill a few years ago, I had occasion to use a Black & Decker no. 8 nibbler to cut 12-ga. (almost 1/8-in. thick) stainless steel sheeting. Stainless steel is just about the toughest metal to cut. The tool would break after one 4 by 8-ft. sheet. I knew I had to do something to keep the owner of the mill from quitting the project. So I decided to use copper bearing anti-seize compound on the bottom side of the sheet, where I would be cutting. I used heavy gear oil to cover the cut-mark on top, so I could still see the pencil mark. With this simple change I was able to extend the life of the tool greatly. At $85 a set this was an exceptional improvement.”
“I like my new Milwaukee 1/2-in., 14.4-volt cordless drill-driver. I bought it to replace an old Makita cordless drill. The batteries last a long time before they have to be recharged. One time I accidentally dropped the drill from about 10 ft. up an extension ladder. It bounced off the bench and onto the concrete floor, but still ran fine.
“My 1999 Swischer 60-in. pull-type mower worked good for cutting very thin grass, but it wouldn’t work under normal mowing conditions. Even with sharp blades and good belts it would windrow the grass, no matter how slow I mowed with it. The deck design was too square and had no curve to it, which prevented the grass from being discharged well.”
Milwaukee telescoping pole saw
5 Best Buys1 Worst Buy“My Milwaukee 10-in. telescoping pole saw operates smoothly and has good reach and battery life.
“I bought a used 1968 Deere 3020 diesel. I probably paid more than it sold for when it was new, but I got a better tractor than anything else I could buy for the same price.”
“My Milwaukee battery-operated saw is a good saw with one flaw – it needs a diaper as bar oil runs out of it after use and leaves a mess. Poor craftsmanship.”
“My 2015 Milwaukee 8-in. metal-cutting circular saw cuts right through 1/16-in. thick sheet metal. It’ll also cut 1/8, 3/16, and 1/4-in. thick steel, but the saw’s blades dull more quickly in thicker material. I get my saw blades professionally resharpened in order to save money. I think Milwaukee blades are the best on the market.”
“My Milwaukee metal-cutting circular saw is a versatile and powerful tool. It cuts metal like a normal saw cuts wood and will even handle 1-in. thick plate steel.”
“My 1997 Kawasaki Mule 2510 has performed great with no problems. I use chains on the rear tires during the winter which allows me to use the machine all year long.
“My Milwaukee 14-in. handheld cut-off saw is my worst buy. The arbor nut easily overtightens during use. Also, the saw’s housing broke within the first month of use.”
William Teller, Powells Point, N.C.: “My best buys are my Milwaukee portable band saw and angle grinder. I’ve used both for about two years with no problems, I use them almost every day.”
Milwaukee M12 tools
5 Best Buys0 Worst Buys“I usually research the tools I buy ahead of time, so I can’t really say I’ve…”
“I’ve had no problems with my 2022 Woodland Mills HM126 portable sawmill (www.woodlandmills.com; ph 855-476-6455). I use the sawmill as a hobby tool. I wanted to buy American-made but couldn’t justify the added expense for a hobby sawyer. I’m still experimenting with it and learning. Overall, it’s a very good machine.
“I’ve purchased quite a few Milwaukee M12 and M18 tools. Most have been home runs. The M18 Quik-Lok pole saw, weed whip, and power broom are great. The M18 leaf blower is really handy. They have good batteries, too.
“However, the M12 power caulking gun was disappointing. It’s hard to control the amount of caulk as it doesn’t stop when you release the trigger.”
“I’ve been impressed with the battery life and power of my Milwaukee M12 and M18 tools. I really like the high-torque impact wrench and the weed eater. The M12 drill and impact driver are very powerful for their size.
“The absolute worst thing I bought recently is a 5-ft. Land Pride brush hog. It does a good job if the grass is only 8 in. tall or less. If the grass is taller, it bogs up under the deck until it stalls the 40-hp. tractor I use. I wish I could have my old worn-out 5-ft. Kioti brush hog back. It would mow weeds and grass that were more than 3 ft. tall.”
“The 1967 Bobcat 500 skid loader my dad bought used in 1969 for $1,200 still runs great. The original engine was replaced with a short block engine 20 years ago.
“I like my Milwaukee M12 cordless tools which include an impact driver and wrench, a drill, and an LED flashlight that I bought 7 years ago. These tools still have the original batteries, but I bought extra large batteries for them that are ready to swap out when the original ones go dead.”
“My Milwaukee M12 lithium ion cordless drill/driver has plenty of power and is a pleasure to use.
“My 1960’s Deere 2510 tractor still works great. I just wish it had a console.”
Milwaukee M18 1/2-in impact
5 Best Buys0 Worst Buys“My Milwaukee M18 1/2-in. impact is, hands down, just as good as anything air-powered I’ve used, and it’s way more convenient and quieter. Battery power has come a long way.”
On the negative side is Mark’s Deere 1025R. “The machine runs but doesn’t do anything great. It’s louder than it needs to be. At 189 hrs., the implement hydraulic pump failed, and Deere doesn’t consider this part of the powertrain even though you don’t have steering when running. There are multiple hydraulic leaks around the machine. I should’ve bought something different or older.”
“I like my Milwaukee M18 1/2-in. impact and drill driver keyless chuck as well as my M12 3/8-in. impact. They are great tools and especially handy with no cords. I don’t use my air impacts anymore. The M12 impact doesn’t have a solid feel like the M18 but is very handy for light work. They do have a short run time, but I purchased the cheapest batteries.”
“My Milwaukee M18 1/2-in. impact wrench and 6-in. grinder are great tools. If you can’t get a bolt loose with a breaker bar, this impact tool will get it or break the bolt. The grinder is a handy tool, it works well, and you don’t have to look for a cord to cut or grind something.”
“Our 2019 Milwaukee M18 1/2-in. drive cordless impact wrench has a lot of torque. My father and I restore antique tractors, and this wrench has yet to meet a rusted bolt it can’t handle. In fact, we hardly ever use our air impact wrench any more. We love this tool and highly recommend it.”
Phil’s impressed with his Milwaukee M18 1/2-in. cordless drill. “This drill’s variable speed control, torque adjustment, power, battery pack life, and charging unit are way superior to other brands I’ve used, including Sears Craftsman and Makita. I also own two Milwaukee 4 1/2-in. angle grinders and a 14-in. metal chopsaw. All are reliable and get lots of use.”
Milwaukee battery-operated grease gun
5 Best Buys0 Worst Buys“I have a Milwaukee battery-operated grease gun. I’m on my third chuck, but otherwise I like my other Milwaukee tools. I just wish they were made in the U.S. Maybe tariffs will help?”
“My Milwaukee rivet gun with M12 battery handles 3/16 stainless steel rivets easily. I used it for putting troughs in my grain tank under the two augers on a Deere 9510.
“Anything made in China always disappoints me.”
“My Milwaukee cordless grease gun is easy to use and often works on zerks that won’t take in grease with a pistol-grip gun. It comes with a nice, plastic molded storage case.”
“My 2016 Milwaukee 18-volt lithium ion 1/2-in. impact wrench has more power than my air impact wrench. It can easily change all 4 tires on my pickup and do a brake job on one battery charge.
“My Milwaukee grease gun can go through 4 or 5 tubes of grease on one battery charge.
“Rust Bomb is the best penetrating oil I’ve ever used (www.conklin.com). It just eats up rust and makes PB Blaster look like it’s made of water.
“I think the quality of Harbor Freight tools has improved.”
On the “worst buy” side, he lists his Sears Craftsman ratchet wrenches and screwdrivers. “The ratchet wrenches have big-toothed gearing that doesn’t hold up to heavy use, and their screwdriver tips break even if you’re turning the screwdriver by hand.”
Ben likes his 2014 Milwaukee MI8 FUEL hammer drill impact wrench. “One day I used the drill to actually drive my riding mower into a shed and up a ramp by using a socket to drive a transmission pulley nut. I love this tool’s power. I recently bought a Milwaukee brushless sawzall and it works great, too.”
On the “worst buy” side, he lists the Performance Tool pistol grip grease gun from Northern Tool. “The directions didn’t make sense. I finally got it loaded, but something inside the grease gun went bad and messed everything up. I never was able to get much grease out of the gun and ended up throwing it away. I think I’ll go buy a Milwaukee cordless grease gun.”
Milwaukee M18 Fuel 6 1/2-in. circular saw
3 Best Buys1 Worst Buy“My Chapman Mfg. Master screwdriver set (#5575), purchased in December 2024, is an awesome, made-in-the-U.S. set (www.chapmanmfg.com; ph 475-232-0802). It has all the bits I’ll need and is built to last. It can handle more torque than most. The set includes a 90-degree angle ratchet and a screwdriver-type driver. The ratchet is amazing and has helped me remove some ‘impossible’ fasteners. I use it regularly, especially for hard-to-turn fasteners. I take it back and forth between the shop and the house. Maybe I need another set?
“I haven’t had a good experience with the Milwaukee 18V Fuel 6 1/2-in. circular saw. After about a year, the first one stopped as if the auto-brake was fully engaged. The second one did the same. I never even wore out the blade. For warranty service, I needed to go to a repair center about 2 hr. away. I never seemed to have a day to do this, and arranging shipping was difficult. I finally tried one that isn’t a Fuel. It’s 18V and doesn’t have an auto-brake. It doesn’t have enough power for me, but it works.”
“My Milwaukee M18 Fuel string trimmer and 16-in. chainsaw are expensive and heavy, but they really get the job done. I’m sure they’ll outlast me by many years.”
“I like my Milwaukee M18 Fuel leaf blower. It works well to clean leaves and chaff off equipment and light snow off sidewalks as well as to blow soybean pods out of soybeans while unloading.
“My one-handed Milwaukee Hackzall is handy for trimming small branches. I carry it along on my lawnmower to trim branches as I go by.
“My 19.2-volt Craftsman tools are good but have poor battery life.”
Milwaukee M18 Fuel cordless chainsaw works fast and is easy to operate. It’s great not having to mix gas and oil.
“My 2019 Chevrolet Colorado pickup is fuel efficient and easy to drive.”
Milwaukee Fuel tools
3 Best Buys0 Worst Buys“My Milwaukee Fuel tools (drill, impact wrench and driver, multitool and more) are reliable, hard-working and fun to use. The tools are well-made, have a great battery life, are comfortable, and are professional grade. I like having one battery platform. Milwaukee is what I adopted years ago, and I have no regrets.”
Patrick isn’t impressed with his Kreg track saw system. “I thought I’d use it more, but it isn’t as easy to use as I thought. It does a fine job, but I find it bulky and finicky. It could very well be user error. I’ve seen other options come to the marketplace that might be a better fit for me.”
“I like my 2021 Milwaukee FUEL finish nailer. It sinks nails as deep as an air nailer and you don’t have to drag a cord around. It’s especially nice when you just have a short project, and you don’t have to set up an air compressor and air hose.”
“I love my new Milwaukee Fuel Lithium 18-volt, 6 1/2-in. brushless hydraulic impact driver. It drives screws 50 percent quieter than standard impacts.
“I also like my new Milwaukee Fuel brushless 6 1/2-in., 18-volt circular saw. I’m building an off grid cabin, and the first time I used this saw was to cut fourteen 2 by 8’s. Yet after I finished the job, the battery still showed a full charge.”
Milwaukee Fuel 18-volt cordless tools
3 Best Buys0 Worst Buys“I’ve been very impressed with Milwaukee Fuel 18-volt and 12-volt tools. I have 25 M18 and 15 M12 Fuel tools. They’re excellent tools and the batteries have a great life. I have batteries from 2014 that are still working.”
“I’m well pleased with my Milwaukee Fuel 18-volt cordless tools. I work in the electrical field, and electric power is not available when roughing in a job. Milwaukee tools have never let me down. They have a long battery life and a lot of power.”
“My Milwaukee Fuel 18-volt, 1/4-in. cordless impact driver works great. Most of the company’s Fuel class tools work great – they’re lightweight, built strong, and last a long time.
“My Milwaukee 18-volt cordless grease gun was an exception, though. It was defective so the dealer sent it back for repairs. The company sent a new grease gun but it didn’t work either, so the dealer sent it back and gave me a replacement. However, I’m still not getting the hang of using this tool and since a lot of the bearings are enclosed and sensitive to the amount of grease being applied, I’ve scrapped it and gone back to a tried-and-true hand pump grease gun. I own many Milwaukee cordless tools that work great, but this isn’t one of them.”
Milwaukee air compressor
3 Best Buys0 Worst Buys“My recent best buy is a Milwaukee air compressor I bought this spring. It can air up multiple tires. It saves a lot of time inflating tires on old equipment.”
Dave is the satisfied owner of a Milwaukee cordless air compressor and vacuum sweeper. “Both tools use batteries I already own. The compact air compressor keeps the tires inflated on our equipment, even when we’re far from the shop. The vacuum is handy to clean out tractor and combine cabs, as well as planter boxes. I’m very pleased with both.”
“My best buy in the last two years has been my Milwaukee battery-powered air compressor. It’s as handy as a pocket on a shirt. If a tractor has a flat, grab this little compressor, hook up the air hose, and turn it on at the pressure you want. If it’s a big tire, do something else for a few minutes. The only shortcoming is it’s not compatible with tires with calcium chloride. But Milwaukee tells you that it isn’t.”
Milwaukee magnetic drill
3 Best Buys0 Worst Buys“A best buy for me has been my Milwaukee magnetic drill. It’s probably one of the…”
“My Milwaukee drill and driver set has tons of power and a long battery life.”
“My 2018 Milwaukee right angle drill works great in tight places.”
Milwaukee right-angle grinder
3 Best Buys0 Worst Buys“I bought a Honda 420 quad new in 2007. With regular maintenance, I haven’t had one breakdown and it never fails. It even still has the original battery.
“I didn’t have the same luck with a Milwaukee right-angle grinder. I replaced the switch twice in the first 2 years. Then the gearhead went out. I put it in its proper place - the trash pile.”
“We’ve always used Milwaukee grinders here in our shop. Their 11-amp grinders in the 4 1/2 to 5-in. size are non-stoppable. Of course, our old standbys are the 7-in., 15-amp grinders.”
Oliver’s “best buy” is his DeWalt 4 1/2-in. angle grinder-sander which operates on 110 volts and turns at 10,000 rpm’s. “It works like a charm for all but the heaviest grinding jobs. I can use the sanding disc to cut thick plexiglass, and the wire scratch wheel does a good job of cleaning slag from welds.
“My Milwaukee 9-in. angle grinder (110-volt, 5,000 rpm’s) is a bit heavy to handle but removes metal fast.”
Milwaukee weed trimmer
3 Best Buys0 Worst Buys“My 2022 Milwaukee weed trimmer always starts on the first pull of the button.”
“About 30 years ago I bought my dad a Black & Decker corded electric lawnmower to mow a steep bank that he couldn’t mow with his other mowers. It cost half as much as a gas mower but worked great once you figured out a logical pattern that worked with the extension cord that powered it.
“About 10 years ago I inherited the corded mower and when my gas mower failed, I put the electric mower into service. I found that even though it was lighter than my other mowers, it had more power and torque. For the last several years, I have mowed our entire lawn with the mower and have found that managing the long extension cord is a simple matter. It never fails to start, runs smoothly, and consumes only a few pennies of electricity. There’s no spilled gas or exhaust fumes and very little noise.
“Recently I bought a Milwaukee battery-powered string trimmer that has twice the power of my old gas trimmer and less maintenance. I also have a Milwaukee battery chainsaw that is now my preferred medium-sized saw.”
“I like not having to pull a rope to start my 2019 Milwaukee cordless string trimmer.
“The motor on my 2016 Ryobi power drill overheated and burned out. The problem is there’s no heat sensor on it.”
Milwaukee 1/2
1 Best Buy1 Worst BuyKevin’s happy with his 2019 Milwaukee 1/2 in. 18-volt impact wrench. “It has 1,400 ft. lbs. of torque to take off lug nuts, and it slows up once the nut has broken loose. It’s a great tool.”
Tom Dent, Oak Grove, Mo.: “I like my Clark-Melroe Bobcat 743 and 440B skidsteer loaders. They’re tougher than a box of rocks and can do more work than a herd of horses.” On the “worst buy” side, Tom lists his Milwaukee 1/2 hp hammer drill. “Whenever I get ithung up it almost always strips the gears. Repairs are expensive.”
Milwaukee 12-volt pruning shears
2 Best Buys0 Worst BuysLaurie is the proud owner of Milwaukee 12-volt pruning shears (number 2534-20) and a 12-volt 6-in. pruning saw (number 2527-20). “We’ve used both of these battery-operated pruning tools to do extensive pruning of fruit trees and evergreens. Both tools have performed beyond expectations. They’re solidly built and easy to handle for a 67-year-old woman. The long-lasting batteries (sold separately) get the job done. The shears have two settings to select from, depending on the size of the branches you’re cutting. I highly recommend these products.”
“I didn’t expect much when I bought my Milwaukee 12-volt cordless compact inflator, but now it’s one of my most-used tools. Just attach the hose to a tire, set the inflation pressure, and turn it on. Once the target pressure is reached, it shuts off. Takes anywhere from a few seconds for a bike tire to a few minutes for a larger tire, but I can do something else while the machine is working without fear of overinflation. Sure beats dragging a hose around.”
Milwaukee 2767-20 M18 cordless 1/2-in impact
2 Best Buys0 Worst Buys“It has amazing power and a battery that lasts a long time between charges,” says Jerome about his Milwaukee 2767-20 M18 cordless 1/2-in. impact wrench. “It has as much power as many corded models. Milwaukee also makes a great cordless cartridge tube grease gun. We use ours almost every day on the farm.”
On the negative side, “My 2016 Ford Edge SEL all-wheel-drive SUV had a great ride and was super fuel efficient, making it the perfect work car for my wife. All was good until mice started getting inside the vehicle. We traded for a 2018 Edge but soon mice got into it, too. Both SUVs were kept in a new country home with an attached garage. A cousin also had a mouse problem with his Edge.”
“It has amazing power and a battery that lasts a long time between charges,” says Jerome about his Milwaukee 2767-20 M18 cordless 1/2-in. impact wrench. “It has as much power as many corded models. Milwaukee also makes a great cordless cartridge tube grease gun. We use ours almost every day on the farm.”
On the negative side, “My 2016 Ford Edge SEL all-wheel-drive SUV had a great ride and was super fuel efficient, making it the perfect work car for my wife. All was well until mice started getting inside the vehicle. We traded for a 2018 Edge but soon mice got into it, too. Both SUVs were kept in a new country home with an attached garage. A cousin also had a mouse problem with his Edge. I found one Edge owner who lived in the country but had no mice problems. However, he also had about 20 cats living in his garage.”
Milwaukee sawzall
2 Best Buys0 Worst Buys“I get a lot of use out of my 2001 Milwaukee sawzall. It’s handy to use and is well built.
“My all-time favorite buy is my 1996 Dodge 2500 pickup equipped with a Cummins diesel engine and automatic transmission and 3:55 rear end. It’s more fuel efficient when pulling a 32-ft. fifth wheel camper than any other pickup empty. The Sears tires I put on it provide a nice ride. This is a real cruising machine.”
“My best buy ever is my 1953 General Elec-tric freezer. It has never broken down and still runs like a top.
“My Milwaukee super sawzall and Mil-waukee 14-in. cut-off saw are also good buys.
“My worst buy is my 1997 Weed Eater gas-powered line trimmer. The problem is that the carburetor wasn’t machined all the way which caused it to shut down whenever it got warm. I had to get a new carburetor.”
Milwaukee handheld bandsaw
2 Best Buys0 Worst Buys“My Honda 4-cycle weed string trimmer starts easily in cold or hot weather. It uses only about half as much gas as a 2-cycle trimmer.
“I keep my Milwaukee handheld bandsaw by my vise and use it instead of a hacksaw to cut anything that will fit the saw. Unlike a flame-cut it results in a nice, smooth edge.”
“It’s as handy as a shirt pocket,” says Henry, pleased with his 2001 Milwaukee portable bandsaw. “I can use it to cut any metal object up to 4 1/2 in. square. It has a 2-speed gearbox that allows me to speed up or slow down the saw as needed.”
Milwaukee bits
2 Best Buys0 Worst Buys“My DeWalt Atomic compact 3/8-in. impact wrench has great torque and never gives up. It’s really compact for the ratio of size to torque. I like the 3-mode lights and the 4-mode speed with a mode for wood lag bolts.
“I haven’t been happy with my Ryobi driver bits. They were marked as impact rated, but the ends are just falling apart under impact, like Chinese bits. But I do like Milwaukee bits. I’ve had some I’ve used for 5 years, and they are still like new.”
“I have many Ryobi 18-volt cordless tools and they are all good and tough. I finally broke my drill after years of abuse and bought the latest brushless impact drill and angle grinder and they seem to be even better. The impact driver has 3 settings which is nice.”
“I bought a Milwaukee cobalt drill bit set from Home Depot. The bits break and don’t drill like new bits should. I thought I had finally bought a decent set of drill bits only to find out they were junk. I’ve had good luck with everything else from Milwaukee.”
Milwaukee drills impacts
2 Best Buys0 Worst Buys“I’ve had great service from Milwaukee drills, impacts, Sawzalls, pole saws, etc. I wore out two…”
“My 18-volt Milwaukee impact has 1,400 lbs. of torque. It has four power levels. Caution is advised on level four. I now break impact sockets. I’ve accidentally tightened lug nuts and have had to find my 3/4 4-in. breaker bar to reverse the lug nuts.”
Milwaukee model
2 Best Buys0 Worst Buys“My 2013 GM 2500 HD extended cab 4-WD pickup has never been to the dealer for any problems. It has a quiet, comfortable ride. The 6.0-liter engine has a lot of power but still gets 16 to 17 mpg.
“My DeWalt 18-volt cordless drill has very poor torque when drilling metal. Also, the batteries didn’t last long so I constantly had to buy new ones. I finally got rid of it and bought a Milwaukee model. Now I have a high torque drill with batteries that will last a long time.”
“I’m well satisfied with my 2006 New Holland TN70 tractor. It works as advertised and is a very strong tractor.
“The chop saw I bought from Harbor Freight is my worst buy. It lasted less than two cuts before it burned out. It’s a piece of junk. I replaced it with a Milwaukee model that works great.”
Milwaukee cordless tools powered
2 Best Buys0 Worst Buys“I own 6 Milwaukee cordless tools powered by M-18 RedLithium batteries that hold their charge for a long time. The company says RedLithium batteries deliver more run time, power, and speed than lithium-ion batteries.”
“I really like my Milwaukee impact wrench powered by a lithium ion battery. It has terrific torque. I keep it with me when on the road in case of a flat tire. I also use it for setting up farm equipment and for general repair work.
“We use our Dodge pickups equipped with Cummins diesel engines to pull heavy loads in our business. These pickups are powerful with excellent fuel efficiency.”
Milwaukee battery impact wrench
2 Best Buys0 Worst Buys“My Milwaukee battery impact wrench has plenty of power, and the battery life is great. It makes changing tires or other tight bolts easy for an old man.”
Les is unimpressed with Ford trucks and the Bronco Sport. “They rust out fast. The new aluminum trucks are too light for good traction. They both have too many recalls, and Ford is too slow on fixing them.”
“My Milwaukee battery-powered impact wrench has plenty of power, and the battery lasts a long time.”
Milwaukee 14.4-volt cordless drill
1 Best Buy0 Worst BuysAlan likes his Milwaukee 14.4-volt cordless drill. “It really came in handy when I needed to do structural work on a barn with no electricity. through 12-in. white oak timbers that were 100 years old and hard as a rock. This drill paid for itself on that job alone. Later on, I purchased the flashlight that can be used with it. The flashlight takes the same batteries. I liked it so well that after using it for a week I threw away my shop trouble light. The batteries have lasted several years and are still as good as new. It’s a wonderful tool.
“My Strait Line laser level is my worst buy. I used it one time to put up concrete forms. Later I found the level was off by 1 in. for every 10 ft., and now I have a 26-ft. local hardware store cheerfully refunded my money but I still have a crooked building.”
Milwaukee 1/4-in
1 Best Buy0 Worst Buys“I bought my 2011 Milwaukee 1/4-in. Masonry bits to drill into concrete but was able to get less than 1/4- in. into the concrete before the ends of the bits wore down. I tried a second bit with the same results. Finally I went to my shop and found some old Milwaukee bits that I had bought years ago. I was able to finish the job with them, and they worked great. The company’s new bits must be made in China, so I won’t buy any more Milwaukee bits. They just don’t work.”
Milwaukee 18V hacksaw
1 Best Buy0 Worst BuysPaul likes his Milwaukee 18V hacksaw. “It’s handy and fits in many spaces a sawzall or band saw won’t. It’s lightweight and durable.”
On the negative side, “I bought a Cub Cadet XLS-52 lawn tractor used at an estate sale. It was 4 mos. old and had not been used. On my first use I lost the electric clutch. The unit wasn’t installed correctly when assembled. I was told it wasn’t covered and that I must have ripped the wires out. It was never fastened correctly and spun when engaged. After installing a new clutch for $300 it’s been a good mower.”
Milwaukee 18-volt Fuel 1/2-in impact wrench
1 Best Buy0 Worst Buys“My Milwaukee 18-volt Fuel 1/2-in. impact wrench is a best buy for me. It’s very powerful, and the battery lasts.
“The Illiana Sliding Shed Door company fixed my old Butler Building doors so they open like new. They did what they said they would do, and the doors now work great (www.llianaslidingsheddoor.com; ph 217-280-0064).”
Milwaukee 28-volt lithium ion
1 Best Buy0 Worst Buys“Krail” penetrating oil is the best penetrating oil I’ve ever used. (www.kanolabs.com). It worked for me when several other brands didn’t.
“My Milwaukee 28-volt lithium ion, 1/2-in. impact wrench was very expensive, and after 1 1/2 years the battery wouldn’t even take a charge. A new battery would cost $165. No more 28-volt Milwaukee impact wrenches for me.”
Milwaukee 28-volt Sawzall impact wrench
1 Best Buy0 Worst BuysMark likes his Milwaukee 28-volt Sawzall, impact wrench, circular saw, and drill. “All these tools have the power to handle any job. I’ve used them on everything from house remodeling jobs to junkyard runs. On any one day, I’ve never needed more than the two batteries that come with each tool.”
Milwaukee 3/8-in electric reversible drill
1 Best Buy0 Worst Buys“My best buy is my Milwaukee 3/8-in. electric reversible drill. I’ve used it for about 10 years and it has never failed. One caution - when using larger drill bits that might grab, always remember how much power this tool has because it could be twisted right out of your hands.”
Milwaukee 4 1/2-in corded grinder
1 Best Buy0 Worst BuysBrian’s best buy is his Milwaukee 4 1/2-in. corded grinder. “My old 4 1/2-in. corded Milwaukee grinder finally gave up after a decade of hard use cutting up scrap metal. The spindle lock stopped working, and if it wasn’t for the fact that the model number decal was worn off, I would have replaced the parts and kept it going. After this one broke, I went out and bought another. I hope this one lasts as long as the first.”
Milwaukee 6370-20 metal cutting circular
1 Best Buy0 Worst Buys“I’ve used my 2015 Milwaukee 6370-20 metal cutting circular saw to cut pallet racking, and also 1/2-in. thick plate steel with no problems. Now I’m using this saw to cut 2 by 4 by 1/4-in. thick box tubing for a trailer that I’m building. Replacement blades for it are available at Menards, but I really like the company’s blades because they’re 8 in. in dia. and cut through metal like it’s hot butter.”
Milwaukee 6390-20 heavy duty circular
1 Best Buy0 Worst BuysEmil’s the satisfied owner of a Milwaukee 6390-20 heavy duty circular saw equipped with tilt lock. “This saw has a lot of power, handles smooth, and works hard. I’m more than happy with it.”
Milwaukee 75th Anniversary drill
1 Best Buy0 Worst Buys“I’ve been using Ballistol oil since reading about it in FARM SHOW 15 years ago and it’s better than any penetrating or lubricating oil I’ve ever tried. I won’t use anything else. A very versatile product.
“My Milwaukee 75th Anniversary drill, purchased in 1999, has been very reliable. I’ve used it for electrical work and other heavy jobs, beating it up pretty good. Very reliable. I’m planning to buy the 100th Anniversary drill in 2024 to keep as a collector’s item.
“My 1992 Makita 9-volt drill has really held up to hard use and several drops. I replaced the original battery packs with Voltman batteries in 2004 and they’re still holding a strong charge. Haven’t worn out like the originals (www.voltman-batteries.com; ph 877-816-7728).”
Milwaukee 9-volt cordless electric drill
1 Best Buy0 Worst Buys“In the early 1980’s I bought a Milwaukee 9-volt cordless electric drill. I’ve used it more than any other hand tool I’ve ever owned. I needed more power for tapping maple trees, so I recently replaced it with a new 14-volt model. I sold the 9-volt unit for half of what I originally paid for it.”
Milwaukee Fastback knife
1 Best Buy0 Worst Buys“In 2022, I purchased a Milwaukee Fastback knife (boxcutter). I like that you only need one hand to open it, and it opens smoothly.
“Another great buy is FARM SHOW’s ‘Great Shop Ideas.’ I’ve already used a few of them.
“My worst buy is a pair of FUBU shoes from Walmart. I got them late last year. I thought getting cheap shoes would save money, but they’re so uncomfortable. They don’t support my feet. They’re okay shoes if you don’t wear them all the time, but no more Walmart shoes.”
Milwaukee Fuel 1/2-in
1 Best Buy0 Worst Buys“I like my Milwaukee Fuel 1/2-in. and 3/8-in. impact wrenches. The big one has a lot of torque. The small one is lighter but still has lots of torque and you can get into smaller places.
“My Bergman Manufacturing tractor auto hitch is heavy-duty, and it hooks up every time. It’s a real time saver.”
Milwaukee Fuel 1/2-in 18-volt impact
1 Best Buy0 Worst Buys“My Milwaukee Fuel 1/2-in. 18-volt impact purchased in 2000 is very powerful and the battery lasts a long time. It was a little costly, but I have no complaints.”
Milwaukee FUEL 18-volt 3/4-in impact driver
1 Best Buy0 Worst Buys“I like the Milwaukee FUEL 18-volt 3/4-in. impact driver because you don’t need an air compressor and hose to operate it and it has excellent torque. It has received heavy use over the past four years and when I had a problem, Milwaukee’s warranty was excellent.”
Milwaukee Fuel Lithium 18-volt 6 1/2-in
1 Best Buy0 Worst Buys“I love my new Milwaukee Fuel Lithium 18-volt, 6 1/2-in. brushless hydraulic impact driver. It drives screws 50 percent quieter than standard impacts.
“I also like my new Milwaukee Fuel brushless 6 1/2-in., 18-volt circular saw. I’m building an off grid cabin, and the first time I used this saw was to cut fourteen 2 by 8’s. Yet after I finished the job, the battery still showed a full charge.”
Milwaukee Fuel M12 brushless 1/4-in impact
1 Best Buy0 Worst Buys“My 2020 Milwaukee Fuel M12 brushless 1/4-in. impact driver is well balanced, and it has four settings and great torque for its size. The battery has a long run time.
“My 2004 Honda Pilot SUV has about 290,000 miles on it. I’ve replaced the timing chain, tires and brakes, but this vehicle still
Milwaukee Hackzall
1 Best Buy0 Worst Buys“I like my Milwaukee M18 Fuel leaf blower. It works well to clean leaves and chaff off equipment and light snow off sidewalks as well as to blow soybean pods out of soybeans while unloading.
“My one-handed Milwaukee Hackzall is handy for trimming small branches. I carry it along on my lawnmower to trim branches as I go by.
“My 19.2-volt Craftsman tools are good but have poor battery life.”
Milwaukee Hatchet 12-volt chainsaw
1 Best Buy0 Worst Buys“I found a Milwaukee Hatchet 6-in. 12-volt chainsaw at Home Depot. You don’t always see it on Milwaukee fliers. I use it from the lawn mower for trimming down trees and low branches. It works great all day. It’s small but mighty.”
Milwaukee M12 1/4-in drive cordless ratchet
1 Best Buy0 Worst BuysA Milwaukee M12 1/4-in. drive cordless ratchet rates as Gary’s “best buy”. “I’m retired but still do small engine repair work. Milwaukee M12 tools are lightweight and powerful, and this compact ratchet does an excellent job of loosening hard-to-get-at rod capscrews.”
Milwaukee M12 3/8-in extended reach high-speed
1 Best Buy0 Worst Buys“Although it was a little pricey, my best buy is my Milwaukee M12 3/8-in. extended reach high-speed ratchet that I bought two years ago. It’s the first thing I grab when working on machinery. It has lots of power and gets into tight places. It’s amazing how long it’ll run on the small 2.0 amp battery.”
Milwaukee M12 Fuel 3/8-in ratchet
1 Best Buy0 Worst Buys“There are a lot of hard-to-reach bolts encountered when working on combines. The Snap-On 3/8-in 14.4-volt long-neck ratchet (CTR767DB) has enough length to reach those bolts and good enough leverage to break them free. I use it more than I ever expected.
“I purchased the Milwaukee M12 Fuel 3/8-in. ratchet (2557-20) before the Snap-On because I use my Milwaukee impacts every day and they are great. The Milwaukee ratchet I bought is too short to bust nuts free and has no power to turn them. I used it a couple of times and haven’t touched it since.”
Milwaukee M18 3/8-in drive impact tool
1 Best Buy0 Worst Buys“My Milwaukee M18 3/8-in. drive impact tool has plenty of power and speed. The ease of use is a real time saver.”
Milwaukee M18 Fuel 1/2 torque wrench
0 Best Buys1 Worst Buy“My 2019 Milwaukee M18 Fuel 1/2 torque wrench is very powerful and has a long-lasting battery.”
On the negative side is a 2019 DeWalt DWP849 polisher. “The motor burned up after a year and a half.”
Milwaukee MI8 FUEL hammer drill impact
1 Best Buy0 Worst BuysBen likes his 2014 Milwaukee MI8 FUEL hammer drill impact wrench. “One day I used the drill to actually drive my riding mower into a shed and up a ramp by using a socket to drive a transmission pulley nut. I love this tool’s power. I recently bought a Milwaukee brushless sawzall and it works great, too.”
On the “worst buy” side, he lists the Performance Tool pistol grip grease gun from Northern Tool. “The directions didn’t make sense. I finally got it loaded, but something inside the grease gun went bad and messed everything up. I never was able to get much grease out of the gun and ended up throwing it away. I think I’ll go buy a Milwaukee cordless grease gun.”
Milwaukee Sawzall
0 Best Buys1 Worst Buy“I’m pleased with my 1995 Gehl 1475 round baler. I do a lot of custom work with it so it gets a lot of use. It took the first season to get the bugs out but my dealer was very helpful.
“I’m very unhappy with my Milwaukee Sawzall. It just fell apart. The casting inside broke and stripped the gears out.”
Milwaukee Surge hydraulic impact driver
1 Best Buy0 Worst Buys“My best buy is my Milwaukee Surge hydraulic impact driver. No other brand of 1/4-in. impact driver even comes close to this new impact. It’s very quiet, has much less vibration, and has adjustable torque settings. I feel it’s worth every penny.
“Another product I’m very pleased with is the Troy-Bilt zero-turn Mustang mower. It has a Kohler engine and the same trans/drive assembly as a Husqvarna zero-turn but is considerably less money. That could be an introductory price due to Troy-Bilt being new to the zero-turn market. I couldn’t be happier with it.”
Milwaukee belt sander
1 Best Buy0 Worst BuysWeaver Metalworking Machinery manufactures 12-in. and 24-in. brake attachments for ironworkers or shop presses (ph 717-625-0302). They make bending 1/4-in. metal quick and easy. They feature a drop-in bottom insert for single V dies, or you can remove it for use with a 4-way die.
“We’re very happy with our Milwaukee 18-in. belt sander. It’s lightweight and very easy to operate.
“We’ve had issues with Snap-on’s 36-in. indexable head pry bar breaking. Snap-on makes great tools, but this one doesn’t hold up.
“I’m not pleased with my Umarex Synergis air rifle. It shoots 2 1/2-in. groups at 15 yards. I got an Air Venturi Avenge-X PCP, and it shoots 1/4-in. and 1/2-in. groups at 50 yards.”
Milwaukee tool batteries
0 Best Buys1 Worst Buy“It seems whenever I buy a battery-powered tool, one of the batteries quits and won’t take a charge before the paint gets marred. It’s happened with Japanese tool batteries, as well as those from Milwaukee and DeWalt. If you try to replace the battery, it costs more than the original kit.”
Milwaukee battery-powered chainsaw
1 Best Buy0 Worst Buys“The best buy I’ve made recently is a Milwaukee battery-powered chainsaw with a 16-in. bar. This saw is so much easier to use than a gas saw. With two batteries, it will run longer than I can work at age 77. I’ve had great luck with all kinds of Milwaukee battery-powered tools from work lights to blowers to tire inflators and their impact tools and drills can’t be beat.”
Milwaukee commercial vacuum cleaner
0 Best Buys1 Worst Buy“I recently bought a new Kawasaki Mule Pro-FXT utility vehicle to replace my 19-year-old Kawasaki Mule, which worked fantastic on our grass-fed beef farm. However, I like the Pro-FXT even better. It has more power and a smoother ride and is a very solid machine.”
On the negative side, “I recently bought a Milwaukee commercial vacuum cleaner through Acme Tool. I paid more than $500 for it, but right from the start it didn’t work and I had to make two trips to a Milwaukee repair center more than an hour away. They discovered the problem - a wire pinched during assembly was causing ground fault outlets to switch off the vacuum. “I’m disappointed the company didn’t offer to send me a new vacuum. Also, to my surprise, I discovered the vacuum comes without the hose or attachments which cost an additional $260. Nowhere in the catalog product description does it say the hose doesn’t come with this expensive vacuum.”
Milwaukee metal cold
1 Best Buy0 Worst Buys“It’ll cut any kind of mild steel, from 28 ga. roofing steel to 1-in. bar stock,” reports Terry about his portable Milwaukee 8-in. metal cold cut saw. “The thicker the metal you’re cutting, the slower you go to keep the motor from overheating. Cutting with this saw creates very few sparks and a burr-free cutting edge.
“My Deere LX277 riding mower is my worst buy. The tractor itself works fine, but not the mower deck. The deck is suspended from the tractor which creates a very uneven job of cutting. I tried using new blades and adjusting the gauge wheels according to the owner’s manual, but nothing helped. Putting the correct air pressure in the tires didn’t help, either.”
Milwaukee power tool combo
1 Best Buy0 Worst Buys“I’m well pleased with my 2014 Milwaukee power tool combo kit which includes a cordless drill, impact wrench, circular saw, and sabre saw. The tools have good power and the batteries last a long time. I like this kit better than Ryobi’s because of the battery life. It’s very aggravating to be out in the middle of a field or pasture 5 miles from electricity, and watch the batteries go dead after only a few minutes of work. One time I even drove 190 miles round trip to an authorized Ryobi repair center where they replaced both the batteries and the charger, but it didn’t help.”
Milwaukee heavy duty cordless
1 Best Buy0 Worst BuysJohn Cernius, Climax, Mich.: “My Milwaukee heavy duty cordless 3/8-in. driver/drill is a best buy. I received it as a gift from my wife. always thought these battery-powered units were for the lazy guy, but my attitude has really changed. I don’t know how I got along without it. Its portability and light weight make it ideal for most of my needs.”
Milwaukee drill/driver
1 Best Buy0 Worst Buys“In 2003 I bought an 18-volt Milwaukee drill/driver and it’s my best buy. It’s powerful and dependable. It has carbide jaws in the ratchet chuck so it doesn’t slip and it can be easily handled with one hand. The batteries charge quickly and last a long time. The company even gave me a free third battery.
“My 18-volt and 24-volt Tornado drills, which I bought from a catalog called Heartland, are my worst buys. These drills are less than worthless. Even after a fresh charge they’re powerless and go dead.”
Milwaukee electric weed eater
1 Best Buy0 Worst Buys“My 2020 Milwaukee electric weed eater is very quick and quiet. The batteries last a long time.”
Milwaukee cordless chainsaw equipped
1 Best Buy0 Worst BuysVictor’s satisfied with his Milwaukee cordless chainsaw equipped with a 16-in. bar. “Last fall my son was helping me remove some trees from fencelines but had trouble starting my Stihl gas saw. I had my reservations about a cordless chainsaw, but the benefits of an instant start, reduced noise and vibration, and no fuel worries have convinced me of its worth.”
Milwaukee drill-driver set
1 Best Buy0 Worst BuysRonald nominates the Hitachi cordless drill he bought at Lowes as his “worst buy”. “The batteries don’t stay charged, and the high-low speed switch accidentally shifts to neutral when using the drill. I hadn’t used this drill much when the problems began. I got no help from Lowes and was told the drill was out of stock so I bought a new Milwaukee drill-driver set, which I like.”
Milwaukee cordless handheld
1 Best Buy0 Worst Buys“I use my Milwaukee cordless handheld, deep cut bandsaw equipped with a bandsaw blade to cut metal. It’s very fast and accurate and is a lot easier than hacksawing by hand.
“My Wayne PC2 self-priming transfer pump works great for pumping ballast into and out of tractor tires (www.waynepumps.com; ph 800 237-0987).
“I’ve had great luck using my Aircat 1150 cordless 1/2-in. impact wrench to loosen stubborn nuts on tractor wheels (www.aircat.com; ph 888 424-7228).”
Milwaukee usb-rechargeable hard hat
1 Best Buy0 Worst Buys“I’ve used my Milwaukee USB-rechargeable hard hat headlamp five days a week for six years, working on feeding and manure handling equipment in dairy barns. It never gave me any grief and took a lot of abuse. I used it until the charging port wore out. I bought an identical one to replace it.”
Milwaukee hand-held battery products
1 Best Buy0 Worst Buys“Milwaukee hand-held battery products have better battery life, more power and are the most dependable.”
Richard isn’t as pleased with the Tracfone Moto E cellphone he purchased at Walmart. “When the phone was two months old, I got the run around about which company would handle the warranty. After 3 hrs. on the phone, I gave up and threw it in the trash.”
Milwaukee power-plus 14.4-volt rechargeable
1 Best Buy0 Worst BuysA 1999 Milwaukee Power-Plus 14.4-volt rechargeable hammer drill rates as Richard’s “best buy.” “This is the best rechargeable drill I’ve ever owned. It not only has two drilling speeds and a fantastic hammer drill mode, but it has 20 adjustable settings for driving screws. It drives self-tapping and sheet metal screws with ease. It will quickly bore holes in wood, steel, and masonry products. The unit came with two battery packs and a charger so I never have a problem with drained batteries. The battery fits onto the handle two different ways to help balance the unit no matter which direction you hold the drill. This drill cost twice as much as the competitors, but it works 10 times better.”
Milwaukee impact wrenches
1 Best Buy0 Worst Buys“We love the convenience of our cordless Milwaukee impact wrenches. They’re powerful and reliable.
“We bought our Deere 2680H high-speed disk in 2020. We chose Deere specifically because we thought Deere would stand behind their product. It had so many problems that I would consider it an unusable implement. Major bushings had to be replaced each season, bearings in rollers ($600 each) went out the first season, rollers ball up with wet dirt (it only works well when very dry), cylinders leaked the first year, and disk hangers move on the bar. There were several other problems as well. Our local dealer helped us out, but Deere wouldn’t do anything.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.