Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Vol. 43, No. 5 (2019) › Feature
Feature storyBest Buy

The Story Of A Faithful Old Garden Tractor

Larry Johnson, Ontario, N.Y. · FARM SHOW Vol. 43, No. 5 (2019), page 14

About 30 years ago Johnson bought a used 1979 Ariens GT 18 hp. 2-WD garden tractor equipped with a hydrostatic transmission. He’s still using the “best buy” tractor.

“I do all my own repair work so the tractor has never been in a repair shop. The most expensive repair I ever made to it was in 2004 when I paid $204 for a new front pto shaft, bearings, and pulley,” says Johnson. “The tractor came with a lot of features that were way ahead of other garden tractors at the time, such as a 3-pt. hitch, front and rear live pto, and hydraulic lift arms. It was designed more like today’s sub compact tractors than anything else.”

The list of attachments Johnson built for the tractor include a 3-pt. fast hitch adapter; an easy-to-install cab with wiper, defrost, heater and mirrors; and an offset drawbar for mowing.

Soon after Johnson bought the tractor he started using it to pull a drag in soft ground, which led to an accident. “While I was turning at the end of a field the tractor slid forward and hit a tree. To keep it from happening again, Johnson added a second brake pedal and modified the brakes so he could brake each rear wheel independently.

He didn’t like the tractor’s hand control shift so he converted it to a foot-operated system. “I disconnnected the foot pedal that put the hand control in the ‘stop’ position and installed new linkage direct to the transmission. I also added to the back of the pedal so the operator can push it down to go in reverse. Now the hand control is used only to put the transmission in park, start, or drive.”

He used masonite and wood to build the cab, which he hangs from the rafters in his barn when it’s not in use. “I lower the cab until the back part clears the tractor and then pin it onto a bracket on back of the tractor that supports the 3-pt. hitch. Then I slip a pipe through holes drilled into both sides of the cab and tighten down four bolts against the pipe. The back part of the cab pins onto the 3-pt.,” says Johnson.

He also made a big concrete roller for the tractor and a heavy-duty tongue to support it. The roller rotates on a small pipe that rides inside a bigger pipe. The tongue runs to both sides of the roller and is built with a pair of telescoping pipes. “I back the tractor up to the roller, slide out the small pipe, and hook it up to the tractor. Then I back up some more to slide the pipe all the way in and pin both pipes together,” says Johnson.

Contact: FARM SHOW Followup, Larry Johnson, 1740 Kenyon Road, Ontario, N.Y. 14519 (ph 315 524-8244; lejohnson35@ icloud.com).

Read more at FARM SHOW →
The Story Of A Faithful Old Garden Tractor
Photo: FARM SHOW
The Story Of A Faithful Old Garden Tractor
Photo: FARM SHOW

Reader comments

Ariens GT18 hp 2-wd garden

2 Best Buys0 Worst Buys
Best Buy
Larry Johnson, Ontario, N.Y. · Vol. 44, No. 4 (2020), p. 12

“I have the best and the worst tractors I’ve ever owned sitting side-by-side in my barn.

“The best is my 41-year-old Ariens GT18. FARM SHOW wrote about the many jobs I do with it a year ago in “The Story Of A Faithful Old Garden Tractor” (Vol. 43, No. 5).

“Parked right next to that amazing Ariens tractor now is my new Husqvarna TS354D. Of the 8 mower tractors I’ve owned, this is the most difficult one to put the deck on and off. It’s a commercial mower so it’s heavy and just miserable to work on. For example, after you disconnect the front, the sway bar on the back is nearly impossible to get at. To take the belt off, you have to remove the belt guard and force the belt off the pulley. I made some modifications so the sway bar is easier to reach, and I put belt keepers on the blade spindles so the belt won’t fall off while putting it on.

“Once you do get the deck off, it’s too heavy to handle. I rigged up a block and tackle on a hand cart to tip it up.

“Worst of all, though, is that once you get out to the yard it does a lousy job of mowing. At the end of last season, it developed a bad noise that was the transmission fan eating up the drive belt - a manufacturer’s defect. To fix, I had to pull the transmission and differential. On other tractors this would have been a 15-min. job.”