Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Snap-On › tools

Snap-On tools

What FARM SHOW readers say · 7 Best Buys1 Worst Buy · Power & Hand Tools

Snap-On tools

7 Best Buys1 Worst Buy
Best Buy
Paul W. Martin, Greenwood, Wis. · Vol. 47, No. 4 (2023), p. 12

“We’ve had a good experience with Snap-On tools. They’re built well, hold up to hard use, and have a lifetime warranty. We especially like the ratchets and wrenches.”

Best Buy
Cloverdale Repair, Greenwood, Wis. · Vol. 47, No. 2 (2023), p. 13

“We like our Snap-on tools because they are made in the U.S.A. with quality components and built to last.

“Milwaukee M18 battery impacts are also strong and last long.”

Best Buy
Charles Baldwin, Elizabethtown, Penn. · Vol. 39, No. 4 (2015), p. 14

“Over the years I’ve purchased several Snap-On cordless tools. I’m a professional mechanic so I use these tools a lot. My 3/8-in., 14.4-volt and 1/2-in., 18-volt impact drills work amazingly well, as does my 1/2-in. 18-volt drill. It runs smoother and has more power and torque than any cordless drill I’ve ever used. I’d recommend these tools to anyone.”

On the “worst buy” side, he lists Primecell battery service. “I sent a batch of batteries from several guys in our shop to this company for rebuilding, but when the batteries came back the guys all complained about the poor running time. I told them to follow the instructions provided and they did, but the batteries still wouldn’t last.

“I tried contacting the company, but they wouldn’t return my calls until I left a voice message saying that I would be calling the Better Business Bureau. A company rep then called me back and said my warranty had expired, and that they were going to turn me in for harassment. I tried to explain that I was trying to make sure our guys had done everything as instructed and that I had been trying to contact the company for more than 3 months. If the warranty had expired so be it, but I just wanted them to call me back and tell me. The company rep then hung up the phone.”

Best Buy
Mark Conyers, Weatherford, Texas · Vol. 31, No. 5 (2007), p. 12

“I’ve been using Snap-On tools for 30 years in trucking and farming and for motor racing service and repairs. They’re built with quality and never let me down.

“The Chicago Electric variable speed 3/8-in. drill and reciprocating saw I bought from Harbor Freight are my worst buys. The saw stalls constantly, and it’s difficult to cut anything other than the thinnest or softest materials. If I try to use the drill at slower speeds the motor literally smokes. I destroyed one motor while using a 3/8-in. drill bit at normal speed in only 1/8-in. thick mild steel. Fortunately the drill was under warranty each time, but a warranty is pointless if the tool can’t survive normal use.”

Best Buy
Bill Griffin, North Garden, Va. · Vol. 26, No. 3 (2002), p. 15

“I’m impressed with my Deere AMT 600 utility vehicle which I bought used. It’s one of the company’s earliest models and has a motorcycle front end. This machine has performed beyond my expectations in every way and has required no major repairs. I use it for hauling hay, wood, dirt, manure, rocks, and to tow my log splitter and a small trailer. It goes through mud and climbs hills with no problems. I like that it fits in the back of my pickup.

On the “worst buy” side, he lists Sears Craftsman tools. “They break easily. Here’s what happened to the tools I own. Open end wrenches spread open, rounding off the bolt head. The ends broke off screwdrivers. Sockets split. The end broke off my breaker bar. The pliers are too sloppy to get a good grip. I plan to buy Snap-On tools from now on.”

Best Buy
David M. Welling, Ridgeway, Ohio · Vol. 25, No. 2 (2001), p. 15

“My 2001 Dodge 2500 SLT pickup equipped with a 24-valve Cummins air-cooled diesel engine and 4-speed automatic transmission is my best buy. It has a lock-up torque converter and a 3:55 rear end gear ratio. The only problem was that it took a long time to get it. I ordered it in February 2000 but didn’t receive it until four months later. However, it was worth the wait. I really like the black-over-gray finish. I also like the vehicle’s power and torque. With all that torque and the anti-spin rear axle, I have to be careful or I’ll end up going sideways.

“Regarding Harbor Freight tools, you really have to watch what you buy. Some of the products are misleading as far as their claims of being made in the U.S.A. For example, I ordered a Hanson drill bit set. The index box was made in the U.S., but the drill bits were made in China and were of poor quality.

“I’ve owned Snap-On tools for more than 22 years and have never been disappointed with them. I’ve traded and upgraded toolboxes and tools over the years, both hand-operated and power models, and their trade-in value is great. I’ve used a 1/2-in. air impact tool for 20 years and it has never been rebuilt. I traded it for a new 2000 model and the dealer gave me $75 for it. Snap-On tools cost a little more, but in the end you don’t have a piece of junk when it comes time to trade or upgrade.”

Worst Buy
Don Lasee, Krakow, Wis. · Vol. 25, No. 2 (2001), p. 17

“A product called Astro Seal is my best buy. I used it to seal a weeping pto gasket on my semi tractor without having to do any draining or disassembly work. It seals through water or oil and doesn’t harden or crack. It works in temperatures ranging from 50 degrees below zero to 220 above. It’ll seal lead, asphalt, glass, wood, sheet metal, concrete, and all solid surfaces. Whatever you seal is paintable immediately. I liked it so much that I became a dealer.

“My Snap-On hand tools are my worst buy. I’v found Snap-On dealers to be extremely arrogant and they refuse to warrant their tools. Also, their polished wrenches may look impressive but they’re difficult to hang onto when you have oily hands. The company’s screwdrivers twist and their cotter pin puller bends. I’d rather have Sears Craftsman hand tools any day.”

Best Buy
Dave Welling, Ridgeway, Ohio · Vol. 24, No. 1 (2000), p. 15

“My 1988Ford Festiva car has more than 195,000 miles on it but still uses very little oil and has a good-looking body. It gets about 40 mpg.

“Snap-On tools and toolboxes are also best buys for me. They hold their value just like Deere tractors.”

Own a Snap-On? Tell FARM SHOW how it’s held up.

Your report could appear in a future issue.

Send your Best or Worst Buy

More Snap-On products

Snap-On 3/8-in drive impact swivel 2 best · 0 worstSnap-On 1/2-in 18-volt cordless 1 best · 1 worst

See all Snap-On reports →