Sears Craftsman shop tools
What FARM SHOW readers say · 5 Best Buys4 Worst Buys · Power & Hand Tools
Sears Craftsman shop tools
5 Best Buys4 Worst Buys“I use my 2016 Husqvarna zero-turn riding mower equipped with a 61-in. deck to mow about 2 1/2 acres of grass. It’s built heavy.
“I’ve found the quality of Sears Craftsman shop tools has declined. Their wrenches just don’t hold up under punishment like they did in the past.”
“My 1990 Kubota L&G tractor equipped with a 3-cyl. diesel engine, hydrostatic transmission, and 48-in. mower deck has about 1,300 hrs. on it but still works great. We use it to mow about 2 1/2 acres of hilly, rough lawn and it’s now on its third set of blades. I’ve had to replace only a universal joint and the tires. I’d be hard pressed to replace this tractor with any other brand, or maybe even with a Kubota because their new models have too much plastic and fiberglass.
“For more than 35 years I’ve used only Sears Craftsman shop tools including saws, planers, drill presses, sanders, and routers. I can’t say enough good things about these tools. It’s a shame the company sold this brand.”
“My Stihl MS 290 chainsaw equipped with an 18-in. bar is my best buy. I’ve run 44 gal. of gas through it over the years, but it has only been back to the dealer once for a checkup. It’s an unbelievable saw.
“I own a lot of Sears Craftsman tools that used to be made in the U.S., including allen wrenches and ratchets, and they work great. But the company’s newer tools are made in China and the quality has gone down. I’m very disappointed in them.”
“I’ve been buying Sears Craftsman tools for 45 years. However, the last set of 1/4 to 9/16-in. combination open-box end wrenches I bought are poor quality. They’re thicker and wider than the company’s previous wrenches, which makes them useless in confined areas. Also, these tools are no longer stamped ‘Made in the U.S.A’.
“Here’s a question: why can Ace Hardware sell Craftsman tools, but not honor the warranty if you don’t buy from them?”
“I had good luck with a 1981 White 2-135 tractor I bought used in 2000, so when a neighbor sold his farm 3 years ago I bought his White 2-155 with about 8,000 hrs. on it. I use this tractor mostly to pull a 1,500-gal., 120-ft. field sprayer up and down our hilly fields at speeds up to 9 mph. I can easily spray 100 acres per hour. Both tractors have required only routine maintenance.
“My Sears Craftsman tools are worst buys. This company used to build fair value tools, but not any more. For example, their punches break easily. I no longer buy from them and instead buy professional tools. They cost more up front, but they last.”
“I’ve had good success with Sears Craftsman tools since the 1950’s. However, last year I bought a top-of-the-line Craftsman rototiller equipped with reversing tines. It worked good except when the engine surged. Under warranty the service rep replaced 7 different carburetors, but even that didn’t solve the problem. The company refunded my money. The service rep said the EPA’s requirements for carburetors don’t allow for power and idle adjustments like on older models; therefore, the fuel/air mixture couldn’t be regulated.”
“My worst buy is any Sears Craftsman motorized tool. I bought three different products equipped with an ‘easy start’ system: a 2000 push mower, a 2002 16-in. chain saw, and a 2006 Craftsman riding mower. Unfortunately, the easy start system isn’t easy to start. The first time I went to use the riding mower it wouldn’t start and spent two weeks in the shop. When we finally picked it up and brought it home, it still didn’t work. Sears had to come out two more times to get it running. No more Craftsmans for us.
“My husband loves our 2007 Hyundai Elantra. It has 100 percent bumper-to-bumper warranty coverage up to 5-year/60,000 miles, and a 10-year/100,000 mile power train warranty. It averages 34 mpg.”
Patrick’s impressed with his 1998 Troy Bilt wide body lawn mower. “We use it to mow our 1-acre lawn which is very steep. We had been using a Cub Cadet riding mower, but even when it was equipped with wheel weights it didn’t do a very good job. The Troy Bilt does a great job and has been trouble-free.”
“I don’t like Sears Craftsman power tools and lawn and garden equipment. My most recent negative experience was with a gas-powered leaf blower. If I tilted the blower the least bit to the left or right it stalled. The company says that’s normal, but I don’t think so.”
“I’m impressed with my Deere AMT 600 utility vehicle which I bought used. It’s one of the company’s earliest models and has a motorcycle front end. This machine has performed beyond my expectations in every way and has required no major repairs. I use it for hauling hay, wood, dirt, manure, rocks, and to tow my log splitter and a small trailer. It goes through mud and climbs hills with no problems. I like that it fits in the back of my pickup.
On the “worst buy” side, he lists Sears Craftsman tools. “They break easily. Here’s what happened to the tools I own. Open end wrenches spread open, rounding off the bolt head. The ends broke off screwdrivers. Sockets split. The end broke off my breaker bar. The pliers are too sloppy to get a good grip. I plan to buy Snap-On tools from now on.”
Own a Sears Craftsman? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.