Sears Craftsman 18 hp riding mower
What FARM SHOW readers say · 3 Best Buys0 Worst Buys · Mowers, Lawn & Snow
Sears Craftsman 18 hp riding mower
3 Best Buys0 Worst Buys“My 1980’s Sears garden tractor powered by a 16 hp Onan engine and equipped with a 2-speed transmission (low and high range) and 48-in. mower deck is my best buy. I bought the tractor used at a flea market for $200 with about 1,000 hours on it. Now it has more than 2,000 hours, but it still works as good as new. This little tractor has a lot of power and is virtually indestructible - it can even pull a van with the transmission in low range. I use it with both a front and rear-mounted blade as well as a sickle mower.
“I own a newer Sears Craftsman 18 hp riding mower that’s also equipped with an Onan engine and standard transmission, and it’s a best buy, too. I mounted an exhaust stack on it like the ones found on bigger tractors. The Onan is a wonderful engine - you just touch the starter and away it goes. I have a pair of great twin tractors!”
“I use my 1984 Sears Craftsman 18 hp riding mower to mow 2 1/2 acres. It’s a best buy. The only maintenance it needs is replacing the belts and idler pulleys about every three years. It still mows like it was a new machine.
“My Ariens zero turn mower equipped with a 17 hp engine and 42-in. deck is my worst buy. Three belts had to be replaced within a three-week period. The mower came factory-equipped with 1/2-in. belts, which I replaced with heavier-duty 5/8-in. belts. Now this mower works perfect.”
“My best buy is my 1987 Sears Craftsman 18 hp garden tractor. I use it to mow my 1 1/2-acre vineyard and figure that over the years I’ve mowed the equivalent of about three miles per week. I built a dozer blade for it which I used to push about 100 tons of dirt that I used as a base for my driveway. My only maintenance has been to replace the starter and a couple of steering shaft bushings. I also had to replace the mandrels on the mower. The company wanted $75 for the main center mandrel and $65 for the two outside ones. I rebuilt them myself for $15 each. I also used 4-in. dia. PVC pipe to build a 10-ft. long weed wiper that mounts on front of the tractor. I use it with Roundup to control johnsongrass.
Own a Sears? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.