Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Pellet Pro’s › pellet mill

Pellet Pro’s pellet mill

What FARM SHOW readers say · 1 Best Buy1 Worst Buy · Everything Else

Pellet Pro’s pellet mill

1 Best Buy1 Worst Buy
Worst Buy
Larry Nolf, Lakeview, Mich. · Vol. 33, No. 4 (2009), p. 15

Larry’s disappointed with his Pellet Pro’s pellet mill. “I bought this farm-sized pellet-making mill last December. I had hoped to start up a pellet-making business and put 8 to 12 machines to work.

“After I bought the mill I waited for the company to send a moisture tester, but I got tired of waiting and started the machine up in January. Apparently the moisture content of the material I used was too high and as a result I was unable to produce anything. Two weeks later four bolts between the gearbox and milling side of the machine failed. Finally, I got the moisture tester and used material with the proper moisture content, but the machine still did’t work well.

“Then in March the motor went bad and blew some capacitors. The company sent new ones. The company says the machine is capable of producing 200 to 400 lbs. of pellets per hour but I get less than 100 lbs.

“I called the company and asked for a refund, but their best offer was to take the machine back and try to sell it for me. And I would have to deliver the machine to them in Illinois - a round trip drive of about 16 hours. I think I should have received a complete refund. This issue still is not resolved.”

Best Buy
Merlin Wooley, Beaverton, Mich. · Vol. 31, No. 6 (2007), p. 13

“My 2007 Honda Accord equipped with a 4-cyl. engine is my best buy. It’s a fine medium size car that rides and handles well and is fuel efficient.

“I bought a used 1995 Bandit model 90 brush chipper and it’s all the company said it would be (Bandit Industries, Remus, Mich.). It has 65 hp and makes getting rid of brush a fast, easy job that’s almost fun. Great service and parts availability.”

On the minus side, “I’m not real happy with my 2007 Pellet Pro’s pellet-making mill. It’s designed to let you make your own pellet stove fuel from inexpensive materials, such as corn stalks, corn cobs, switch grass, straw, seed hulls, etc. When I went to use it, most of the oil was on the floor. I put oil in the machine and plugged it in, but it vibrated so bad that I had to shut it off. The input shaft was 1/16 in. out on vertical and the same on horizontal. Another problem is that the welds on the frame (which is built too light) weren’t ground down.

“I called the company about getting an oil seal and a parts list, but they told me they don’t have a seal. So I’ll do what I can to control the oil leak. In my opinion, the design and craftsmanship of this mill needs improvement. I’m using wood materials and haven’t been able to make many good batches. I believe it’ll take time and experience to learn pellet making. I’d like to hear from anyone who can help me.”

Own a Pellet Pro’s? Tell FARM SHOW how it’s held up.

Your report could appear in a future issue.

Send your Best or Worst Buy

See all Pellet Pro’s reports →