PB Blaster general purpose oil
What FARM SHOW readers say · 2 Best Buys0 Worst Buys · Shop & Maintenance
PB Blaster general purpose oil
2 Best Buys0 Worst Buys“I hate seeing rusted-out vehicles. So to keep rust forming from the inside out on my vehicles I fill a Sure Shot sprayer (www.sureshotsprayer.com; ph 262 437-0330) with PB Blaster general purpose oil or Blaster Corrosion Stop (www.blastercorp.com/corrosion-stop). I put vehicles up on ramps and coat the underside, seams, and underbody compartments. I make sure to avoid coating on all the components that heat up under use such as exhaust manifolds, exhaust pipes, and brake rotors.
“On pickups I spray the inside of the rear wheel wells and cab corners, because those 2 spots are always the first to rust from the inside out. I remove all the body plugs and spray the inner area with oil, and then replace the plugs. I also carefully spray the inside of vehicle doors from the bottom drain holes, being careful not to spray electric door motors and door locks.
“Blaster Corrosion Stop will protect the vehicle for 2 to 3 years while the multipurpose oil will protect for a year. I’ve had excellent results for many years with all PB Blaster products.”
Kent nominates PB Blaster penetrating oil as his “best buy” (ph 800 826-8563 or email: [email protected]). It’s a concentrated penetrant that frees rusted or frozen parts by releasing the surface tension that causes parts to stick. It also lubricates to protect against future rust and corrosion. “Over the years I’ve tried most of the other penetrating oil products on the market, as I’m always bringing home some very rusted machine that needs a little repair.”
Own a PB Blaster? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.