Minneapolis Moline G900 LP loader tractor
What FARM SHOW readers say · 2 Best Buys0 Worst Buys · Farm & Livestock Equipment
Minneapolis Moline G900 LP loader tractor
2 Best Buys0 Worst Buys“Our best buy is a Minneapolis Moline G900 LP with a loader. We have run it almost every day for 25 years with no major repairs. It’ll do most loader work at 600 to 800 rpm’s and only burns about 1 gal. per hour. The engine has good low-end torque also.
“If you don’t need over 70 hp, a Minneapolis Moline M670 would be the cheapeast thing going. It runs at only 1,400 rpm’s and has plenty of power and torque.”
Edward nominates three old but reliable tractors as “best buys”.
He bought his 1968 Minneapolis Moline G900 LP loader tractor used when it was 12 years old. “It still has the same clutch it had when we bought it. We credit that to the engine, which runs at slow rpm’s. We’ve put more than 5,000 hours on it. It’s an economical tractor to operate.
“We bought our Minneapolis Moline G1350 LP Wheatland about ten years ago and mounted a Vaughn front-end loader on it. The loader has tremendous capacity - it will lift more than 5,000 lbs. The loader’s normal lift height is 12 ft., but by adding a boom it will lift up to 15 ft. high. We prefer tractors that run on LP gas, especially for loader work.
“We bought our White 2-85 torbocharged tractor used. It generates 105 hp on the dynometer. We use this tractor mainly for haying work so we decided to make it our ‘economy’ tractor. We put in some different pto gears that allow us to slow down the engine speed while keeping up the pto speed. As a result, at 1,600 to 1,800 engine rpm’s we can pull a discbine or a baler at 5 to 7 mph and use only about 2 gallons of fuel, when other tractors would use 3 to 4 gallons. This tractor is equipped with a 3-speed shift-on-the-go transmission that really works good in the field.”
Own a Minneapolis Moline? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.