LockNLube grease coupler
What FARM SHOW readers say · 12 Best Buys2 Worst Buys · Shop & Maintenance
LockNLube grease coupler
12 Best Buys2 Worst Buys“The LockNLube grease coupler works very well although there are a few times when a standard zerk fitting grease coupler is better so it’s a good idea to have a spare grease gun with a standard coupler handy.”
“Our LockNLube grease gun couplers and adapters are best buys. These products have saved me a lot of time and frustration while greasing machinery, especially in hard-to-reach places.”
“My LockNLube grease coupler does a good job of clearing out clogged grease fittings (www.locknlube.com; ph 603 795-2298). It locks onto the fitting tightly and rarely leaks grease.”
“On the negative side, my LockNLube grease coupler was disappointing in that it broke on the first zerk that was totally stopped up. It claims that it’s rated for 10,000 psi, but I was only using an old hand-pump grease gun. It’s also too bulky for tight spaces, though that’s unavoidable with the bulk needed to make it releasable. On the plus side, no more yanking zerks out of their threads, and the extra jaw set that comes with it is easy to install.”
“I was given a LockNLube grease gun coupler by my local Ceni-Pe-Co lubricant salesman and find it saves grease every time I use it (www.locknlube.com; ph 603 795-2298).” The coupler fits onto most standard grease guns and comes with a sliding sleeve that’s activated by a thumb lever. Four spring-steel jaws lock onto the grease zerk, creating a leak-proof seal. Activating the trigger releases the coupler from the zerk.”
“I like my LockNLube grease gun coupler (www.locknlube.com; ph 603 795-2298). It fits onto most standard grease guns and comes with a sliding sleeve that’s activated by a thumb lever. Four spring-steel jaws lock onto the grease zerk, creating a leak-proof seal. Activating the trigger releases the coupler from the zerk. Excellent customer service.”
“My LockNLube grease gun coupler saves a lot of grease. Like the ad says, the grease goes in the machine, not on the machine.
“I bought a Wand Wizard attachment for pressure washers. It lets you adjust the spray tip on your washer’s wand to multiple angles anywhere up to 90 degrees, and then lock it in place. Unfortunately, after only about 20 min. of use the seal blew out. I called the company and they replaced the unit. However, the seal on the replacement failed, too. The idea behind this washer tip is a good one, but it needs a better seal.”
“I like my LockNLube grease gun coupler (www.locknlube.com; ph 603 795-2298). It fits onto most standard grease guns and comes with a sliding sleeve that’s activated by a thumb lever. Four spring-steel jaws lock onto the grease zerk, creating a leak-proof seal. Activating the trigger releases the coupler from the zerk.
“My 1994 EZGo golf cart still runs great. It’s powered by a Subaru 2-cyl. gas engine and equipped with a dump bed and a heavy-duty receiver hitch. I use this machine every day on our farm. It’s easy to get in and out of.”
Jeff nominates his 2012 New Holland Workmaster 55 loader tractor as his “worst buy”. “One month after I bought it a hydraulic hose on the loader started to leak, and then at 250 hrs. the tractor’s left brake locked up. I traded it for a Kubota, which works great.
“I’m impressed with my Lincoln air-powered grease gun (www.lincolnindustrial.com; ph 314 679-4200) and LockNLube grease coupler (www.locknlube.com; ph 603 795-2298). The grease coupler fits onto most standard grease guns and comes with a sliding sleeve that’s activated by a thumb lever. Activating the lever releases the coupler from the zerk. Now I don’t dread greasing equipment any more.”
“After using smaller models for years I bought a used Kuhn GT 4120 rotary rake. It gently sweeps hay into windrows that cure quickly, without any wet spots. The hay never gets ‘roped’ so it feeds evenly into my balers. Also, the hay is cleaner because the rake tines don’t run in the dirt. We liked this rake so much that we recently bought the company’s newer GT 4121 model.”
On the “worst buy” side, he lists his LockNLube grease coupler. “It worked good at first, but then quit after just 15 tubes of grease. You’re supposed to press a thumb lever to release the coupler from the zerk, but if there was any pressure at all I had to use a needle-nosed pliers to get the coupler to release. Later on, I couldn’t even get the coupler to lock onto the zerk.”
“Over the last 30 years I’ve owned at least a dozen DeWalt power tools and they’ve never let me down.
“I like my 2002 Deere GT245 tractor and also my 2001 Deere 4100 HST tractor, which is equipped with a quick-tach frontend loader. Both tractors are great little work horses.
“I bought a LockNLube grease coupler after reading about it in FARM SHOW. Now I no longer have to prime my grease gun.”
“I like my LockNLube grease gun coupler (www.locknlube.com; ph 603 795-2298). It fits onto most standard grease guns and comes with a sliding sleeve that’s activated by a thumb lever. Four spring-steel jaws lock onto the grease zerk, creating a leak-proof seal. Activating the trigger releases the coupler from the zerk. I like that this coupler works on my metric fittings and zerks, which I had trouble getting grease into.”
“I like my LockNLube grease gun coupler (www.locknlube.com; ph 603 795-2298). It fits onto most standard grease guns and comes with a sliding sleeve that’s activated by a thumb lever. The unit has 4 spring-steel jaws that lock onto the grease zerk, creating a leak-proof seal that prevents the coupler from coming loose and breaking the seal. Activating the trigger releases the coupler from the zerk. It leaves me with one hand free to hang onto something else in difficult-to-reach places.”
Doug likes his LockNLube grease gun coupler (www.locknlube.com; ph 603 795-2298). It fits onto most standard grease guns and comes with a unique sliding sleeve that’s activated by a thumb lever. The unit has 4 spring-steel jaws that lock onto the grease zerk, creating a leak-proof seal that prevents the coupler from coming loose and breaking the seal. Activating the trigger releases the coupler from the zerk.
“I use it on my DeWalt 18-volt cordless gun. It’s not 100 percent effective, but I don’t like to grease any machine without it. It’s a bit longer than standard tips, and occasionally that can be a problem. But overall it works great.”
He likes (www.lucasoil.com; ph 800 342-2512). “It seems to work good in older machines that have a lot of hydraulic drips and seeps. It’s not as effective as the advertising would have you believe, but it does slow down a lot of annoying small leaks.”
Own a LockNLube? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.