Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Hudson › bandsaw mills

Hudson bandsaw mills

What FARM SHOW readers say · 3 Best Buys0 Worst Buys · Chainsaws & Saws

Hudson bandsaw mills

3 Best Buys0 Worst Buys
Best Buy
Eugene Mitchell, Gladys, Va. · Vol. 40, No. 5 (2016), p. 12

“My Hudson bandsaw mills are excellent (www.hud-son.com; ph 800 765-7297). I bought an Oscar 18 model in 2006 and an Oscar 228 in 2009. Both work great. I added a 3 by 6-ft. frame to them to extend the log table.

“Woodmizer bandsaw blades are excellent.”

Best Buy
John Houston, Davidsonville, Md. · Vol. 40, No. 3 (2016), p. 14

“I like my new Hudson bandsaw mill but the tracks that it’s mounted on are too flimsy. The tracks consist of two 6-ft. sections of welded-together 2 by 2 angle iron.

“I wanted to reinforce the tracks and make the sawmill easier to move around, so I bought another 6-ft. section of angle iron track and welded it onto one end. Then I used 3-in. sq. tubing to build a support frame and welded it onto the underside of the tracks. I also added tandem axle wheels to each side.

“The wheels, which came off a pair of small hand trucks, are supported by homemade axles. The wheels are spaced farther apart than necessary because I had earlier used them for another project. I mounted the hand truck’s handles on one end of the trailer so that I could move it around by hand, but the trailer proved to be too heavy. So I welded a coupler onto the other end so I can move it around with my skid loader.

“The portability really comes in handy. For example, if I get too much sawdust where I’m cutting up trees I can quickly move to another location. I use 4 jacks to keep the sawmill level on uneven ground. I spent less than $500, whereas a new trailer for the sawmill would have cost at least $2,000.”

Best Buy
Mac A. Ray, Ronceverte, W. Va. · Vol. 34, No. 3 (2010), p. 13

“I like my 2007 Hudson bandsaw mill, which is equipped with a 30-in. throat and 18-ft. track. I retired in March 2007 and this mill has provided me with an enjoyable pasttime. I used it to saw lumber to build a shed that now houses the sawmill. I also used it to build an attached building that holds a planer table saw and a workbench, where I glue up and clamp doors, cabinets, and other projects.”

Own a Hudson? Tell FARM SHOW how it’s held up.

Your report could appear in a future issue.

Send your Best or Worst Buy

See all Hudson reports →