Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Brands › Hesston

Hesston: what farmers say

43 reports in FARM SHOW · 30 Best Buys13 Worst Buys

Best Buy
James E. Yoder, Bonanza, Ore. · Vol. 23, No. 3 (1999), p. 15

“It has performed with flying colors,” says James, pleased with his Hesston 1160 hydraulic swing swather/conditioner. “I had a field that was plowed the previous fall but filled up with volunteer grain anyway the following spring. I let the grain grow to chop for hay. I was concerned that the swather wouldn’t track to either side of the row as it’s supposed to, but it worked perfectly. What’s more, the swather’s never plugged in heavy grass or alfalfa, either.”

Worst Buy
Dale Spoerl, Elizabeth, Ill. · Vol. 20, No. 6 (1996), p. 14

“My Hesston 1160 haybine is my worst buy. It has poor tires and poor hydraulic hoses. I can’t see the sicklebar so I can’t tell when there’s a plug-up. Unplugging it is a horrible job. Years ago I owned a Hesston PT10 haybine that was engineered much better. I put about 6,000 acres through it.”

Best Buy
David Schlies, Denmark, Wis. · Vol. 20, No. 3 (1996), p. 15

“It has unmatched capacity and reliability,” reports David, pleased with his 1990 Gehl1060 forage harvester. “Last year one man using three wagons couldn’t even keep up with it although we were only one mile from our silo. “My 1995 Hesston 1160 14-ft. mower-conditioner goes right through heavy crops and leaves a uniform windrow that dries quickly. I’d buy both the Gehl and Hesston machine again without thinking about it.”

Hesston 530 round baler

2 Best Buys1 Worst Buy
Best Buy
Doug Scott, Poplar Bluff, Mo. · Vol. 29, No. 2 (2005), p. 15

“My Hesston 530 round baler is easy to operate, has a simple design, and makes good bales.”

Worst Buy
David C. Moore, West Grove, Penn. · Vol. 26, No. 4 (2002), p. 14

David nominates his 1996 Hesston 530 round baler as his “worst buy”. “The main drive chain broke and had to be replaced. Sometimes the baler couldn’t keep the bale rolling. It would stop turning, and then I would have to eject it and start over. Neither the dealer nor the service rep could solve the problem. I finally sold it and bought a used Deere 335 baler. It works good.”

Best Buy
Bert Rosenbalm, Luttrell, Tenn. · Vol. 20, No. 1 (1996), p. 14

“My best buy is my GS Superior 3-pt., double-cutting 7-ft. sicklebar mower (made by Gribaldi & Salvia in Italy and sold by Greene’s Trailer & Equipment, Rt. 2, Box 321A, Hwy. 33 N., Sneedville, Tenn. 37869 ph 615 733-2272). These mowers cost only about half as much as disc mowers and are fast replacing them here in Tennessee. They mow almost as fast as a disc mower and you can use them with a tractor as small as 30 hp. They’re guaranteed not to clog up even in wet, down, tangled, or thick hay and sell for about $2,000. I’ve used mine for three years and it has worked great. It mows right through hay that would clog up a conventional sicklebar mower. One time I used it to mow 5 acres in two hours. I use my Long 360 36-hp tractor or Massey Ferguson 35 32-hp tractor to pull it. “It looks like a conventional sicklebar mower but it’s definitely not one. The guards are riveted onto a flat bar just like the knives. Guards and knives are belt-driven by a double action crank that has two rods. One rod drives the guards while the other drives the knives. The double cutting action is what makes it cut so great. It lets you mow about as fast as you can drive or as fast as your ground will allow. Every moving part runs on needle bearings so it requires daily greasing. “The machine has a kickback like any other mower. By adjusting the length of a chain on one side of the mower you can mow at almost any angle which works great on ditches. As the hold-down clips on the cutterbar wear down they can be adjusted with set screws. “I also like my Hesston 530 round baler which I’ve used for over five years with no problems.”

Hesston round baler

2 Best Buys1 Worst Buy
Worst Buy
George Hodges, Westfield, N.C. · Vol. 30, No. 1 (2006), p. 13

“My 2003 Hesston round baler is my worst buy. The unit was delivered with everything out of adjustment and with no hitch bolt assembly, so I made my own even though it’s supposed to be standard equipment. After three seasons of use it almost works okay now. But recently I discovered that the dipstick for the gearbox fell into the gearbox.”

Best Buy
Joe Pfister, Lebanon, Mo. · Vol. 23, No. 5 (1999), p. 16

“Purchasing a new 1995 Chevrolet Silverado 1/2-ton 4-WD pickup was one of the best things I’ve ever done,” says Joe. “It rides smooth over rough terrain and pulls our cattle trailer without straining the engine. I liked it so well I traded it in for a 1999 Chevrolet Silverado 4-WD extended cab model. I use it for both work and pleasure.

“I’m equally proud of my 1993 Hesston round baler. It runs smooth and has been trouble-free.”

Best Buy
Roscoe Haase, Valentine, Neb. · Vol. 22, No. 3 (1998), p. 15

A 1993 4750Hesston square baler is one of Roscoe’s “best buys”.

“I bought it at a farm sale and had to make some repairs on it. After that, it worked great. It is a well engineered machine and lets you know if the hay is too wet for baling. It’s a simple piece of equipment to operate.”

His “worst buys” were six 36 by 48-ft. hay tarps be bought for $250 apiece from Inland Plastics Ltd. of Drumheller, Alberta. “They were OK if it didn’t get windy. But all it took was one crazy, 60 to 70 mph wind to tear them to shreds. None of the tarps lasted more than a year.”

Hesston 1340 discbine

2 Best Buys0 Worst Buys
Best Buy
Terry Coulas, Cobden, Ontario · Vol. 29, No. 5 (2005), p. 13

Terry likes his 2002 Hesston 1340 discbine. “We do custom hay cutting and also cut our own hay, for a total of about 2,500 acres per year. With this machine we can cut any type of hay at any speed, any time. We trade every five years and only have to replace the knives. Drying time is one day quicker than for our neighbor who uses a New Idea model. This machine is a pleasure to use, and because it’s a hydro-swing model it works excellent in odd-shaped fields.”

He nominates his 2000 Case-IH 8312 discbine as his “worst buy”. “The conditioner rolls wore out after one season and had to be replaced. No warranty coverage.”

Best Buy
Dale E. Nielson, Chapman, Neb. · Vol. 27, No. 1 (2003), p. 15

“The Hesston 1340 disc windrower I bought used in 1999 cuts fast and performs well in short grass, tall cane, or corn stalks.”

Hesston 540 round baler

2 Best Buys0 Worst Buys
Best Buy
Walter L. Blackert, Mineral, Ill. · Vol. 32, No. 5 (2008), p. 15

“My Case IH JX 55 front wheel assist tractor and Hesston 540 round baler are both best buys.

“My Case IH LX 130 loader tractor has problems. The loader can’t control the bucket. I got no help from the company after three trips to the shop.”

Best Buy
Bill White, Bremen, Ga. · Vol. 28, No. 2 (2004), p. 15

“My 1977 Deere 2240 tractor equipped with a 145 frontend loader is my best buy. It has required only one new fan belt and new batteries.

“Other best buys include my 1989 Lely 205 5-disc mower, 1994 Hesston 540 round baler, 1977 Kuhn 14-ft. pull-type hay tedder, and Deere 650 3-pt. side delivery hay rake.”

Hesston 1014 hydroswing swather

0 Best Buys1 Worst Buy
Worst Buy
Robert Gabriel, Endora, Kan. · Vol. 20, No. 1 (1996), p. 15

“My best buy is a corn head reel designed to pick up lodged or down corn that’s made by Harv’s Farm Supply (Rt. 1, Giltner, Neb. 68841). It’s mounted on my Case-IH 1063 corn head. Last fall it saved us about 20 bu. of corn per acre. It paid for itself in one afternoon. “My worst buy is my 1992 Hesston 1014 hydroswing 14-ft. swather. It works okay under normal conditions, but heavy or damp hay gets plugged up in the auger immediately even if the crimper rolls are removed.”

Hesston 1120 haybine

0 Best Buys1 Worst Buy
Worst Buy
Lawrence Bannerman, Holly, Mich. · Vol. 34, No. 6 (2010), p. 15

Lawrence is disappointed with his 2008 Hesston 1120 haybine. “When the haybine was delivered it wasn’t completely put together and the dealer wouldn’t do anything about it. I used the machine to cut about five acres of hay and it shook so bad the knife broke. The dealer took it back and said he fixed it, but the next year it didn’t work any better. I took the haybine back to the dealer for repair and when I went to pick it up the dealer said the warranty had expired and I had to pay $500 to get the machine back. Since then I’ve cut only about 50 acres with it and have spent $1,000 on repairs.

“My 1979 New Holland 489 haybine was able to cut about 5,000 acres of hay before it broke down and I had to spend $900 on a new gearbox. But since I bought the Hesston model I’ve cut 600 acres of hay with the old New Holland model and only about 50 acres with the Hesston.” Goodyear Conquest TSI series tires on it. After only about 29,000 miles we’ve already had to replace three of the tires. The tires start separating in the center of the tread, and then the steel belting starts to protrude. We’ve gone to two local Goodyear dealers with no satisfaction. No more Goodyear products for us.”

Hesston 12-wheel rake

1 Best Buy0 Worst Buys
Best Buy
William H. Braymen, Coin, Iowa · Vol. 21, No. 4 (1997), p. 17

“My Case-IH 5130 tractor has only 86 hp but does the work of the 130 hp tractor that it replaced. “MyGreat Plains 10-ft. no-till drill does a good job in corn stalks and saves time. “My Hesston 12-wheel rake works fast. I can use it in the field at the same time as the baler. It leaves windrows so wide I hardly even have to weave the baler.”

Hesston 140-90 tractor

1 Best Buy0 Worst Buys
Best Buy
James E. Lyce, Laceyville, Penn. · Vol. 28, No. 6 (2004), p. 14

“I like my Hesston 140-90 tractor made by Fiat. This tractor is built heavy, is fuel efficient, easy to operate, and it’s also durable. It has more than 7,000 hours on it but still doesn’t use any oil.”

Hesston 30A Stackhand

1 Best Buy0 Worst Buys
Best Buy
Maynard Hartke, Litchfield, Ill. · Vol. 42, No. 1 (2018), p. 12

“In 1976 I bought a Hesston 30A Stackhand. The machine picks up windrowed hay and chops it, then packs it into a chamber. The bales come out looking like giant loaves of bread, and nothing is tied. The machine can also be used to stack corn stalks for livestock bedding. It still works great after all these years.”

Hesston 3710 hay tedder

0 Best Buys1 Worst Buy
Worst Buy
Virgil W. Russell, Bloomingdale, Ohio · Vol. 23, No. 5 (1999), p. 17

Virgil owns a 1998 Hesston 3710 hay tedder. “I haven’t broken a tooth on it or had any other mechanical problems. It came equipped with large shields which came off long ago. They were held by a very small bracket that could in no way support this much weight.”

AWagner professional duty power painter rates as his “worst buy”. “It doesn’t spray in any kind of pattern and makes a terrible noise.”

Hesston 430 round baler

1 Best Buy0 Worst Buys
Best Buy
Harold L. Swartfager, Knox, Penn. · Vol. 21, No. 3 (1997), p. 15

Harold nominates his 1995 Hesston 430 round baler as his “best buy”. “It makes a good, solid bale and is virtually maintenance-free. We haven’t had any problems starting the bale. Also, the tieing mechanism works good.” Clinton Sawyer, Sawyer Harvesting, sometimes ‘bunch feeds’ into the feederhouse. It should feed in better.”

Hesston 4570 in-line square baler

0 Best Buys1 Worst Buy
Worst Buy
Allan Davidson, Finksburg, Md. · Vol. 21, No. 4 (1997), p. 15

Allan’s the owner of a “best buy” 1988 Steiner S-20 4-WD tractor equipped with a 20 hp engine and 4-ft. front-mount mower. “It has a lot of power and traction and can handle even the toughest mowing conditions. It has center steering which makes it very maneuverable for mowing around bushes and trees. I use a hydraulic-operated angle blade on it for snow removal or light grading jobs. A variety of other attachments are available which makes it a versatile machine.

“My Hesston 4570 in-line square baler makes firm, square bales that are easy to load on my stack wagon.”

On the negative side, he lists his 1992 Ford Explorer. “The engine valve cover gaskets leaked, and to replace them the fuel injection system had to be removed. The job costs $300 or more.”

Hesston 4590 center-feed baler

1 Best Buy0 Worst Buys
Best Buy
Jim Schroeder, Bend, Oregon · Vol. 29, No. 1 (2005), p. 13

“My 2004 Hesston 4590 center-feed baler is a great machine. It makes nice bales, turns short, and it’s small enough to fit through small gates. It handles well on the road since it trails right behind my tractor. We use it on small farms. This baler saves a lot of time compared to side-feed models. I can’t imagine using anything else.”

Hesston 4650 small square baler

0 Best Buys1 Worst Buy
Worst Buy
Jay Ledbetter, Stanford, Mont. · Vol. 37, No. 2 (2013), p. 12

“My Hesston 4650 small square baler, which I bought used, is my worst buy. My Deere 346 baler had been having problems so 5 years ago I bought the Hesston model sight unseen from a local dealer. He said their service department had gone completely through the baler and that it was ready to go.

“I took the machine home, loaded it up with twine, greased and lubed everything and started baling. On its fourth bale it sheared off the needles, which cost $385 to repair. A week later I started in the field again and it worked great for 26 bales and then it threw a no. 60 chain. Soon after, a bearing on the fingers carriage seized, at a repair cost of $285.

“Now I have more than $10,000 tied up in a baler that to date has made 57 bales. This has gone way past a worst buy and might just be criminal. By the way, the old Deere 346 still works and turns out beautiful bales.”

Hesston 4755 mid-size baler

0 Best Buys1 Worst Buy
Worst Buy
Vance Vesco, Lovelock, Nev. · Vol. 21, No. 6 (1997), p. 16

Vance likes his 1996 Hesston 4755 mid-size baler. “After two years of baling it has failed to tie the bale properly only once. It bales beautifully in drier hay and has a lot of capacity.”

Hesston 4790 3

1 Best Buy0 Worst Buys
Best Buy
Lamar Hege, Deer Park, Wash. · Vol. 36, No. 5 (2012), p. 14

Lamar owns Case IH 5130, 5230, and 7140 tractors equipped with Cummins diesel engines and powershift transmissions. “These tractors are fuel efficient and easy to operate and, at 5,000 to 7,000 hrs., have had few problems. They have great hydraulics, which is a must for operating our twin hydraulic rakes and other hay equipment. We switched from using Deere 40 and 50 series tractors because they were constantly needing repairs or weren’t able to operate our rakes.

“My Hesston 4790 3 by 4 baler and Hesston 8830 and 9240 swathers are well designed, and parts are reasonably priced.”

Hesston 4800 big square baler

1 Best Buy0 Worst Buys
Best Buy
James E. Whitehead, Bennett, Colo. · Vol. 22, No. 1 (1998), p. 16

“My Hesston 4800 big square baler does a great job and needs only routine maintenance. I haven’t had to replace many parts on it. It’s a good machine. “My Lightening B bale monitor was a joke. It never worked right. “The 454 cu. in. engine on my 1989 Chevrolet pickup overheated all the time and I couldn’t get anyone to do anything about it. I can’t use it to pull anything even when the temperature is only in the 70’s or 80’s.”

Hesston 4900 1-ton big square balers

1 Best Buy0 Worst Buys
Best Buy
Mike Fluit, Pasco, Wash. · Vol. 21, No. 4 (1997), p. 17

Mike likes his four Hesston 4900 1-ton big square balers. “We’ve owned several of these balers in the past. We use our current models to make 40,000 to 50,000 bales per year with very few breakdowns. They’ve been very dependable and have a lot of capacity. “In the past we used a 1994 MVE 8000 self-propelled big square bale stacker but it had a lot of problems the first year we owned it so we traded it for a new one the next year. We used it for two years but we couldn’t keep it together. The machines cost $125,000 apiece. Finally we sold it back to the dealer at a big loss.”

Hesston 4900 4

1 Best Buy0 Worst Buys
Best Buy
Bob Minner, Fallon, Nevada · Vol. 21, No. 2 (1997), p. 14

“It barely misses a tie and has a lot of capacity,” says Bob, pleased with his 1995 Hesston 4900 4 by 4 1-ton baler. “I’ve used it to make more than 9,000 bales with very few problems. I often operate the baler day and night.

Hesston 550 round baler

1 Best Buy0 Worst Buys
Best Buy
Gary D. Lutzow, Bryant, Wis. · Vol. 40, No. 3 (2016), p. 13

“My Hesston 550 round baler has been trouble-free and makes nice, tight bales. I don’t even have to slow down with it as I approach the windrow.”

Hesston 5510 big square baler

1 Best Buy0 Worst Buys
Best Buy
Donald R. Miller, Dongola, Ill. · Vol. 22, No. 2 (1998), p. 15

“My 1991 Mercury Marquis is a good car. “My 1985 Hesston 5510 big square baler is the most trouble-free piece of machinery I’ve ever owned. “My 1972 Chevrolet pickup is still going strong after 25 years. My 1988 Chevrolet pickup equipped with a 4.3 V-6 engine also works good. “Other best buys include my Homelite XL12 chain saw, New Holland 273 small square baler, and 1964 Allis-Chalmers D17 tractor.”

Hesston 5530 hay baler

1 Best Buy0 Worst Buys
Best Buy
Ed Stalcup, Chuckey, Tenn. · Vol. 38, No. 5 (2014), p. 15

“Back in 1983 I bought a Ford 2610 tractor. I’ve used it with a Bush Hog 2346 front-end loader to load oak logs onto my portable bandsaw mill. I’ve also used the tractor with a Hesston 5530 hay baler. I’m well satisfied with this tractor.”

He’s had problems with his 1999 New Holland Boomer 250 diesel tractor. “The fuel injection pump started leaking, but the company won’t provide any parts or information on how to repair it. Their only solution is for me to buy a new pump at a cost of about $1,000. We’ve tried installing many different O-rings with some success, but the pump still leaks a small amount. I think parts for older New Holland machines are too expensive.”

Hesston 555 round baler

0 Best Buys1 Worst Buy
Worst Buy
C.L. Paul, Jr., Custer, Wash. · Vol. 20, No. 5 (1996), p. 16

He’s pleased with his Deutz-Allis 7085 4-WD tractor. “It shifts smoother than any other tractor I’ve ever owned. We use it to stack silage. My only complaint is that the loader lift cylinders and the hydraulic reservoir are too small. “My Hesston 555 round baler is my worst buy. I worked with the dealer for three years trying to resolve some of the problems I had with it. He did his best but the company wouldn’t help. He finally replaced it with a New Holland 644 baler.”

Hesston 555T round baler

0 Best Buys1 Worst Buy
Worst Buy
Kevin Glenister, Dryden, Ontario · Vol. 26, No. 3 (2002), p. 16

Kevin nominates his Deere 926 disc-type mower/conditioner as “best buy”. “My wife and I used it last year to cut 400 acres of hay and never had to get off the tractor other than to grease it. It was also cheaper than the other brands we checked out, which was a surprise.

“My Hesston 555T round baler is my worst buy. We’ve only used it to make about 1,500 bales but have already had to replace two belts at a cost of $400 per belt. One belt got wrecked when a $4 spring broke. We’ve had numerous other problems with it. We had been using a Vermeer 605A which didn’t have nearly as many problems. We plan to trade the Hesston in this year for a New Holland or Deere model. We would’ve been better off buying one of those brands to begin with, but we tried to save a buck.”

Hesston 6400 swather

1 Best Buy0 Worst Buys
Best Buy
Carl Scheuerman, Dolores, Colo. · Vol. 20, No. 3 (1996), p. 15

Carl’s “best buy” ever is his 1965 Ford 3/4-ton 4-WD pickup equipped with a 6-cyl. engine. “The engine has never been overhauled even though the pickup now has 267,000 miles on it. It’s gone through three water pumps, two fuel pumps, plugs and points, tie rod ends, and one set of brakes. “MyHesston 6400 swather is also a best buy.”

Hesston 6650 swather

0 Best Buys1 Worst Buy
Worst Buy
David J. Peckham, Callaway, Neb. · Vol. 25, No. 4 (2001), p. 16

“It gets a lot of hard use, but we’ve had very little trouble with it,” says David about his 1998 Kawasaki Prairie 400 4-WD ATV. “The company took care of a few minor problems. I have an artificial leg so I appreciate the automatic transmission. The floor board design is also helpful. There are more powerful ATV’s on the market, but after riding them for a while I really came to appreciate this machine.”

“My 1979 Ford F-250 4-WD pickup is a best buy. It has been all over the country and has been in a few tangles that required some hospitalization, but it came away better for it all.

“My 1972 Deere 4620 and 3020 tractors are dependable and are best buys.

“I’m well pleased with my Deere 535 round baler. I’ve owned Hesston and Gehl models before but this is the best.

“My biggest disappointments have been with my Case-IH 470 and 480 21-ft. disks. In my opinion, these discs were nothing but glorified sheet metal. I sold both of them and bought a Deere 14-ft. model. I can cover the same amount of ground as I had been covering with the two Case-IH models, and do a better job. No problems.

“My Hesston 6650 swather is a disaster. I don’t understand how a company can even put its name on a machine like this. I wish I still owned my Deere 1600 14-ft. hydraswing swather.

“I was given a kit to raise the rear bench seat in my 1985 Ford Supercab pickup. It was purchased through J.C. Whitney and was something that I had asked for. However, it’s a worst buy. The bolt holes in the brackets were about three sizes too big, the washers were too small, and I had to reshape some of them to fit. I was really disappointed with it.”

Hesston 780 DT tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Bill Trexler, Candler, N.C. · Vol. 22, No. 4 (1998), p. 16

“Five years ago I purchased a used Hesston 780 DT tractor equipped with a front-end loader. It had about 3,500 hours on it. I’ve changed the oil and filters regularly and have done regular maintenance. The only problems I’ve had were with the water pump and with two remote hydraulic hoses. I now have almost 3,900 hours on the tractor and am still well pleased with it. The only change I’d make is to mount a 4-in-1 bucket on the loader.

“My 1992 Dodge W-250 pickup equipped with a 5.9-liter Cummins diesel engine is a best buy. I bought it used four years ago with 32,000 miles, and the original owner said he hadn’t had a minute of trouble with it. It now has 68,000 miles and still performs flawlessly. I occasionally use it to pull a 6,000-lb. gooseneck trailer carrying a 13,000 or 14,000-lb. load. That’s just about all the automatic transmission can handle. My next pickup will be a Dodge, too.”

Hesston 80-66 4-WD tractor equipped

1 Best Buy0 Worst Buys
Best Buy
Randy Beaupre, Frankville, Ontario · Vol. 29, No. 3 (2005), p. 14

“Our 1990 Hesston 80-66 4-WD tractor equipped with an Allied 594 front-end loader is a great tractor and has been trouble-free while requiring only routine maintenance. The 4-WD really comes in handy in muddy barn yards when loading manure, feeding round bales, and doing many other jobs. My dealer stands behind this product, and if any parts are needed he always has them on hand.”

Hesston 8400 windrower equipped

1 Best Buy0 Worst Buys
Best Buy
David J. Somerfeld, Power, Mont. · Vol. 21, No. 2 (1997), p. 15

David’s had good luck with his 1995 Hesston 8400 windrower equipped with a 14-ft. hay header and 21-ft. grain header. “It rides easy, cuts clean, and is easy to operate. It has a roomy cab with easy-to-use controls, and has a lot of power and is easy to service. My only complaint is that the grain header vibrates badly. We replaced the main drive but it still vibrates so bad that it actually shakes the cab. At times it vibrates so badly that I feel like I’m going to come apart.”

Hesston 880 DT 4-WD tractor

1 Best Buy0 Worst Buys
Best Buy
Terrance Evarts, Waltham, Vt. · Vol. 23, No. 1 (1999), p. 16

“My Hesston 880 DT 4-WD tractor has 3,000 hours with no problems. I wish the company still distributed these tractors in North America. You rarely see a used one available for purchase. Fortunately, my local Ford dealer will order any parts I need.”

Hesston Challenger WR9760 self-propelled discbine

0 Best Buys1 Worst Buy
Worst Buy
John A. Christensen, Wessington, S. Dak. · Vol. 40, No. 1 (2016), p. 12

“I use my 2013 Kubota GX135 loader tractor to load feed during winter and bale hay during summer. It’s a little small for such work, but has held up well. It’s easy on fuel and has had only minor problems.

“I traded my older Hesston windrower in for a new Hesston Challenger WR9760 self-propelled discbine just off the assembly line. I bought it sight unseen thinking it would work at least as well as the older model, which had cut thousands of acres without breaking a single rock guard. However, the rock guards on the new machine are engineered totally different. They’re very weak and break easily. Also, they’re held on with small 3/8-in. bolts that break easily, and because the broken bolts are screwed into the discbine platform, they’re hard to get out.

“Company fieldmen came out and I’ve written to the company but got no response. The salesman told me one of his other customers tried to solve the problem by welding all his rock guards together. I finally did that this spring, and it helped a lot. New Holland, McDon and Deere still make their discbines with solid rock guards, and they use much larger bolts.

“I recently had to replace an air conditioning hose because a hole wore in the hose where it was pulled tight around a corner. The machine’s one-year warranty had expired, so including labor I had to pay more than $800 for a $70 hose – all because of an assembly error.

“I’ve had numerous other issues with this machine, including bolts that worked loose allowing parts to come apart and get damaged. A set screw on a pulley came loose and the pulley slid out of place and got wrecked. It took days to get a new pulley and then more time to install it. The set screw should have been tightened at the factory.

“I like a lot of features on this $137,000 windrower. However, when a neighbor who’s in the market for a self-propelled windrower recently called and asked me how I liked my Challenger, I recommended that he look at other brands.”

Hesston hay tedder lifts

1 Best Buy0 Worst Buys
Best Buy
Gary Risler, Mondovi, Wis. · Vol. 27, No. 2 (2003), p. 13

“My Hesston hay tedder lifts and spreads hay perfectly. It really helps dry out hay after it gets rained on.”

Hesston disc mower

1 Best Buy0 Worst Buys
Best Buy
Art E. Crary, Huddleston, Va. · Vol. 31, No. 1 (2007), p. 15

A 2004 Hesston disc mower that he bought used in 2005 rates as Art’s “best buy”. “We use it to cut about 60 to 70 acres of hay, two cuttings a year, with no problems. We replaced the cutting blades once. This machine reduces our mowing time almost by half compared to our old hay conditioner.

“Our worst buy is the Industrial Tools suspension seat we bought at Northern Tools and installed on our Ford 5000 tractor. After installing the seat my son-in-law went out to ted hay. He reached down to adjust the seat back a notch and it slid back completely off the tractor. Fortunately, he was able to grab the fender to keep from falling into the tedder. That’s when we realized the seat has no stops and will fall off the front or back of the base without warning. This seat is not only cheaply built but dangerous. I welded stops on both sides of the seat so this problem won’t happen again.”

Hesston windrower

1 Best Buy0 Worst Buys
Best Buy
James L. Evans, Hammond, N.Y. · Vol. 25, No. 2 (2001), p. 15

“My 2000 New Idea 5200 9-ft. 3-in. disc mower conditioner is my best buy. It’ll mow through any kind of grass whether it’s wet or dry, and at a fast speed - maybe faster than I should be driving the tractor. All I have to do is hook up, grease it, and go.”

“My 1999 Hesston 9-ft. 3-in. windrower is my worst buy. Every time I use it I seemed to have down time. The main problem is that the mower sections keep breaking and they’re hard to change even though they are the bolt-on type. I adjusted everything as recommended in the owner’s manual.”

Read every report in full

FARM SHOW has run reader Best & Worst Buys since the beginning.

Subscribe to FARM SHOW