Gehl: what farmers say
115 reports in FARM SHOW · 90 Best Buys25 Worst Buys
Gehl (general)
27 Best Buys3 Worst BuysTom Wencl, Blooming Prairie, Minn.: Tom nominates a 1989 Geh133 10 skid steer loader as his “best buy”. “We tested both Case and Bobcat before we bought Gehl. We prefer its ease of handling, power, and ROPS guard. “We also like our 1983 International 4000 windrower which we bought used. The 12-ft, double auger head is trouble-free and works well in oats and hay, The crimper has one steel roller and one rubber roller which works better than our previous win drower that had two rubber rollers. It has good power. However, I wish it had a variable speed reel so we could go faster in short hay.”
Clyde Gumbert, Mondovi, Wis.: “It spreads everything from water to pen packed manure,” says Clyde, happy with his 1987 Hedlund Martin S 1257 side-delivery manure spreader built by Gehl. “Side delivery action lets me spread manure as thick or thin as I want while covering a wide area. However, itdoesn’ tspread dry manure well.”
Joseph Ondracek, Fremont, Neb.: “Our 1986 4510 Gehl skid steer loader with a65-in, bucketis a best buy. It’s very stable compared to several others I've tried, one of which tipped over, I like the ease of handling with the hand controls. Our dealer has also been a big plus. “Our worst buy is a Black & Decker 9020 3/8-in. cordless drill. It doesn’t have enough power and it won’t hold a charge.”
He's not as happy with the dealer-applied undercoating. "It had a 3-yr. warranty but within 6 months it had practically all disappeared and rusting began. A local garage owner recommended Ziebart. This was applied and now there's a heavy undercoating with no visible rust. It’s more expensive, but worth it.” D. DeRolph, Glenford, Ohio: A 309 Gehl manure spreader is his "best buy". "Unloads fast, uses very little power and is the most trouble-free spreader I've ever had for hauling slurry manure from my free stall barn." As “worst buy", he nominates his Black & Decker cordless drill/driver. "It's so weak it won't drill a small hole in hard wood or any metal. Also, it loses what power it does have very quickly."
Earl Chapin, Battle Creek, Mich.: ‘My 595 Owatonna is the best engineered and constructed big round baler I've ever seen. We bale several hundred acres of hay each year and it's so simple and easy to “The poorest round baler I’ve ever seen.” operate it’s a joy to use. The design of the baler is outstanding. For example, I've never seen another pickup on any machine that has grease fittings on every bearing. It runs so quiet you can hardly hear it. “Tl would rate the Gehl baler had before this baler as the poorest round baler I've ever seen. predict that you will not be able to give a belt baler away in the near future.”
Gerald Casler, Ft. Plain, N.Y.: He likes his New Holland hay equipment. “We've got a 320 baler, a 358 rake, a 495 Haybine and all are best buys. We also have four Gehl forage harvestors and several Gehl blowers that have given good service. “I bought a new Case tractor too. It has a nice cab and was a good buy because of rebates and a good trade-in allowance. I don't like it as well as some of my old Oliver tractors, however.”
Fred Kaufmann, Moscow, Iowa: “We're well pleased with our Gehl model 65 grinder mixer, It blends feed well as it's grinding. The only thing I'd like to see is a latch or hook to keep the unloading auger in place when backing up to an indoor feeder.”
Rick Webb, Custer, Okla.: ‘‘We bought this baler last April to bale PIK acres and baled 900 bales of our own and 1,500 bales for neighbors. The season went by with almost no problems,” reports Rick, pleased with his Deere 530 round baler, Tom Konechne, Kimball, S. Dak.: He lists his 1850 Gehl baler as “best buy’. “It's my third Gehl baler and they keep getting better and better. I don’t think I've spent $25 on repairs on the 1600 or 1850 models. The 1850 tailor-makes perfect bales regardless of crop or moisture. Pulls easy with low horsepower and is easy to operate.” Tom also names his Kawasaki KLT 200 3-wheeler as a “best buy"’. “It has many uses, such as herding cattle. It's outstanding at calving time, lambing time, and is an economical replacement for a pickup on many other jobs. With an add-on hitch, it can be pulled to and from the field behind equipment. Very good in mud, snow and so on. Dealer service is outstanding.”
Louis Janish, Kimball, S. Dak.: He nominates his Gehl 1500 round baler as ‘worst buy”. “Talways had trouble getting a bale started, Also, the bearings on the belt rollers were not heavy enough and I spent too much time replacing bearings when conditions were right for baling. I traded it in on an 1805 Gehl last fall and, although haven't used it all that much, it sure seems to work fine. Bearings on the belt rollers are a lot heavier and I've had no problems starting a bale."’
Fred Adrian, Binford, N. Dak.: ‘We have only broken a half dozen Worst’’ Buys previous page) sickle sections on 1,500 acres of quite rocky ground,” says Fred, pleased with his 1981 114 New Holland swinger Haybine, “It has a very good floating head.” Louis F, Major, Newberry, Mich.: “This baler is a whopper!"’ says Louis, pleased with his New Holland 847 round baler. ‘We bought this baler brand new and baled 500 acres without a second of trouble or a single misbale.” On the negative side, he had trouble with his “medium size Gehl baler. We had nothing but trouble with it. The baler would not start bales and we spent more time pulling hay out of the front of the machine than we did baling.”
Dwaine Bockelmann, Pierce, Neb: “My ‘best buys’ are my Gehl 2600 skid loader and a White 2-62 tractor, We use the skid loader every day for filling feeder wagons, scraping lots, and miscellaneous chores. It starts in the coldest weather and hasn't given us any trouble in the three years we've had it. “We're also well pleased with our White 2-62 tractor. The fuel efficiency is exceptional, the tractor handles very well, and its a gutsy performer for its 60 hp. size, We are also happy with the maintenance on it, It's fast. simple and convenient. On the ‘‘worst buy” side, Dwaine’s had trouble with his 40 by 90-ft. Agri-Steel machine shed. “The purlins are spaced too far apart and are not heavy enough. Also, there is not enough pitch on the roof. Wet snow lays longer than it should. Now it leaks like a sieve. It just isn't built heavy enough.” Al and
Victor R. Elson, Ash Grove, Mo: Victor is pleased with his Gehl 1850 round baler. “I have baled two seasons with it and have had very little trouble. What little did have, the company took care of promptly. It makes very nice bales, uniform and tight. Good service, too."
Donald Hale, Delevan, N.Y: “It'll never work when you need it. It blows its own fuses," says Donald, upset with his model 25 Winco alternator. As for his “best buy’ Gehl 7200 flail chopper, Donald says, “It'll cut anything. Even wet hay after the heaviest rains won't plug it.”
Wendell Carlson, Willmar, Minn: He's disappointed with his Saab 99 auto. “The starter went bad and the new one cost more than $300. I spent half my time in the repair shop for that and other repair jobs. “Another product, an L-600 Roun der skid loader, also has numerous mechanical failures. Finally gave up on it and bought a Gehl 2600, which we like very well.” Wendell adds that his Deutz 13006 has been a good buy. “Starts good, is real economical, has good lugging power and very few mechanical problems. There's no overheating and no worries about anti-freeze."
Ray Nauman, Norwalk, Wis: ‘The advertising claim was that it could handle anything but we found the manure had to have a water-like consistency or it couldn't handle it,” says Ray, who was disappointed when he tried, but did not purchase a BetterBilt liquid manure spreader with 3,200 gal. capacity. On the plus side, he’s happy with his Delaval 300 milking equipment. “The system really does a nice job and milking our herd of 100 cows takes about 2 hrs, time with 2 people and six units. Milk-out is very good and mastitis is kept at a minimum. People enjoy using it.” Oskar Heller, Scotia, N.Y,: His “best buys" are his 1090 Gehl mower conditioner and his International 550 manure spreader. ‘‘! used the mower-conditioner all last year and had no trouble at all. A great machine in cutting more than 150 acres. Dealer service was very good. used the spreader all winter with no trouble either. Dealer service is fair.” He’s unhappy with his DuraCraft Bench drill press. ‘'The first and second motors didn't work. The third motor works but it took 4 months to get that taken care of. Looks good but the workmanship is lousy,” he told “My worst buy nomination is a Carrier heat pump installed by Backwood Sheet Metal, of Ottawa, Ill. “The installer charged $47 to state that nothing was wrong.” The product does not maintain a comfortable room temperature. It cost page) about $4,000. Complaints to the company and the installer produced noresult. The installer charged $47 to check the unit and state that nothing was wrong. The Carrier Company did not respond to a letter of complaint.” On the plus side, Leonard likes his Case skid loader. ‘‘It’s the most useful and dependable piece of equipment on my farm. Have found 101 uses for it, with no problems after three years of service."
Jodie Sanders, Orangedale, Nova Scotia: The Belarus 250 heads the Sanders’ list of ‘worst buys’’. “It's been nothing but trouble. In the first week, the gears stuck twice and from then on we spent more time fixing the tractor than operating it. Its main fault was not starting. We traded it in fora second hand David Brown 1200, which we love. Both were from the same good dealer. “We're also happy with our Gehl 1400 baler. We mainly use this baler for baling high moisture haylage. It makes excellent bales. We slip a plastic bag over them, seal them and there's our silage. This baler is easy to use, with an excellent operator's manual, After one short season, it looks good.”
Rodney Gibson, Wallace, Neb: He's pleased with his Gehl 99 forage blower. “Doesn't take much horsepower to blow forage to the top of our silo. It’s easy to service and, if you do plug it, the panels come off easily. I'd recommend it to anyone needing a forage blower."
James McFallen, Union City, Penn: ‘Dealer service has been excellent but it would take an act of God to make that machine work right,” says James about his “International No. 10 green chopper. The discharge chute breaks about every two weeks and is a piece of junk. The dealer installed a new one that lasted about a week, The spout control is hard to reach and, on uneven ground, the machine picks up more dirt than grass. The thing keeps falling apart.” “It would take an act of God to make that machine work right.” On the plus side, James nominates his Gehl 800 chopper as a best buy: “Changing heads is a snap and I've done it several times in less than 15 minutes. The hydraulic knife grinder works well and the machine has about three times the capacity of my New Holland.”
Gayle Isham, Jr., Gustine,Tex: His “best buy” nominations are his Gehl 1500 round baler and a Gehl round bale handler. ‘The round baler has made haying a one-man operation. It's been trouble-free. The bale handler works well for hauling and stacking, as well as feeding in bunks or for unrolling on the ground to feed.”
Stanley Binkley, Hubbard Neb: Stanley says his “best buys” are all 6655 SSaaasaselce eee eatin. _ plaialleilaid them. “We've purchased eight new machines from IH in the last year and a half — including two 986 diesel tractors and a 715 diesel hydro combine — with only a few minor problems. Dealer service has been absolutely super. “Our worst buy was a Mighty Mac skid loader. Five minutes after the warranty ran out we had nothing but trouble. Cost us $1,800 in repairs to use it 18 months. Traded for a Gehl 2600. No trouble with it.”
Wendell Hanson, Ryder, N. Dak: “You can travel as fast as you like with this baler,” says Wendel about his model 1500 Gehl. ‘‘Accepts any size hay or straw windrow. It's the best purchase I ever made.” On the negative side, Wendell notes that his 450 International big round baler has been a disappointment. ‘‘The big drive chain would get hot and stretch, and the shafts were soft and would bend. I had to travel at slow speeds and spend too much time repairing. Baler would not feed well at all."
Ronald S. Krueger, Colfax, Wis: Ronald's happy with his new Gehl 72C flail chopper which replaced an older Gehl model he purchased 10 years ago. “The old Geh! dida fine job and needed few repairs. The new one is easy to handle and doesn't demand a lot of power to run, Especially like the regreasable bearings, which are much better than the old machine's sealed bearings.”
Ken Anderson, Center, Colo: “The 4-cylinder engine doesn't have enough torque and, after 30 hours of work, the shaft broke in the injection pump just when we needed the tractor,” reports Ken about his Ford 5600. “As normal, the part has to be ordered from Kansas City so, more than likely, we'll be done with fieldwork when we get it.” Ken is well pleased with his Gehl 135 grinder mixer with bale feeder. “The capacity is good and the hydraulic motors sure beat chains and belts.” S-t/ FARM SHOW (11 1U CAN USE elected 1 it like linating and S. Johnson r We ec ce s Nor lorst B
Adelbert N. Tallman, Nunda, N.Y: He's pleased with his Gehl 800 corn chopper with 2-row rubber gathering belt corn head. “Has tremendous capacity, runs easily and is very well-built. The new-style row crop head worked great on tall corn, short corn and corn so full of grass and weeds that a conventional head just couldn't be used without plugging.” He also likes his Gilmore Tatge Dump Chief side dump wagon. “Works flawlessly, is rugged and certainly simplifies silo filling.” Adelbert is disappointed with last year's performance of Sutan Plus from Stauffer Chemical. “Weed kill on nulgrass, foxtail and velvet leaf was non-existent. Have used it before with much better results. Maybe I received a bad batch.” Milton Bultema, Wimbledon, N.D.: “Why can't American-made tractors have this same economy,” says Milton, who nominates his English-built Case-David Brown 1412 tractor with a 219 cu, in, turbocharged engine as his best buy. “Its economy is unbelievable. It replaced a 3010 diesel for me and uses about half the fuel. We use it as a second tractor for seeding, light fieldwork and we have a loader on it. Also use it to grind feed with a 425 Artsway Mixer Mill for my 600 to 700 head hog operation. Both steering and shifting are smooth. After 850 hours in 18 months, we have no complaints.”
John Guthrie, Muncie, Ind: He's disappointed with “an Owatonna model 30 skid loader, The service has been good, but there have been too many problems, such as mud and manure packed between the wheels and frame, and problems with the brakes and engine.” On the other hand, he says his Gehl 4400 skid loader, which he uses every day in his dairy and hog operation, has caused few problems and “is easy to operate”’. John wonders if there's anything “Can anything be done to make the 986 International easier to shift? that can be done to make the 986 International tractor easier to shift”.
Ray Malone, Newberry, Ind: “This chopper is ruggedly built for high horsepower tractors. Has high output and is easy to maintain. Exceptionally good hydraulic knife grinder. Also, dealer preparation before delivery was superb,” says Ray of his “best buy" Gehl 800 forage chopper with corn and hay heads, Also on his “best buy" list is a Capco model 400 automatic selfcatch headgate with a Model 400 LC chute and squeeze, and a 100-head portable corral. “I am well pleased with this combination cattlehandling facility because of greatly increased efficiency and lower labor in working cattle on five different farms, It's far more economical than having a permanent corral on each farm. The automatic self-catch headgate is almost foolproof.”
Earl Martin, Lebanon, Pa: He's excited about “Agri-SC liquid product, Its sprayed on fields where there are wet spots and, in a short time, they are dried up. It softens the hardpan underneath so the water can go down. I've dried up spots in a short time that had stayed wet most of the summer.” Earl also likes his Gehl 99 silage blower. “It's the best blower I have ever seen work. It can take silage away as fast as you Gan unload it from the wagon. “Tl have had some trouble with my Massey Ferguson 124 baler. The bales get tight in the chamber and then the twine breaks, The dealer's worked on it but it seers the only {ime it works is when the hay or straw is exceptionally dry.” Earl F. Spencer, Palatine Bridge, New York: “We installed our Patz 366 manure stacker and it worked perfect the very first time — no adjustments, no modifications. Have a lot of Patz equipment. but still am impressed with quality of materials, heft of stock, bearings and simple design that works.”
Darrell Jensen, Hamlin, Iowa: He nominates a Gehl 1200 chopper with corn and hay heads as his ‘“‘best”’ buy. “Tcut all my oats, hay and quite a few acres of corn, plus my son’s and neighbors, and all the trouble we had was a loose set screw on one bearing lock collar. No end to the capacity. I pull it with an IHC 1586 with 165 hp. and have yet to shear a pin." Darrell is disappointed with his “Farmhand grinder-mixer Model 830. Nothing but trouble with it since the day I bought it. Every time wanted to grind, something would break. After a breakdown, the company would send repairs which took about a week to get here. They replaced about 3 gear boxes, 2 hammermill drive shafts, the vertical auger and other miscellaneous parts. The company even took it to the factory for a week. was lucky to have a good dealer who let me use one of his used ones while was broke down.” Darrell adds that “I bought from Agri-Electronics Co., of Bloomington, Minn., a bird chaser which is supposed to keep birds out of metal, uninsulated buildings. Supposed to put out a high pitched sound. The sparrows sit right beside the electric box and it doesn’t bother them at all.”
Norman Culverwell, Craig, Colo: Norman Culverwell, Craig, Colo.. says his new Stieger Cougar is “the ultimate in a farm tractor. It’s comfortable, quiet and the caterpillar en“Tt’s been longer than 12 months but the lemon taste lingers on.” gine has a sufficient amount of power for any job.” Norman notes that he’s unhappy with his Allis Chalmers hillside combine which. he says, “gave problems from the minute it was put to work. The block man was called several times but never showed up. Most problems were related to the hydraulic system.” Norman also faults his Melroe plow, noting that “it broke up and wore out all over. The manufacturer claimed the dealer didn't have it adjusted properly. The dealer did several repairs and lots of welding on pieces that should have been replaced by the factory.” “Pearce Equipment at Clay City has taken good care of the service,”’ says Stanley Greathouse, Johnsonville, lll, who nominates his Case 1370 tractor as his “best” buy: “I've used this tractor one year and have been happy with performance and horsepower. It has a good cab, heater and air conditioner,” Dealers were directly responsible for “best” and “worst” buys nominated by William Allegar, Benton, Pa. He’s happy with the dealer he dealt with in buying his Ford 5000 tractor: “Had a few problems with it but the dealer was very cooperative. Fuel economy is very good and I'll be back for further business.” William is unhappy with after-the-sale service he got from the dealer who sold hima new IH 400 Cyclo air planter: “It developed a hydraulic oil leak when lifting the planter. Dealer didn’t want to know me after I paid cash for the machine.” That same make and model planter was one of the “best buys” Sackreiter Farm, St. Charles, Minn., has made: We planted over 300 acres of corn in a few short days and everything worked like a clock after a few minor adjustments," says Leon Sackreiter of their new IH 400 Cyclo 8-row air planter. ‘The Dickey-john monitor was well worth the extra investment.” Leon notes that a Gehl 2500 skid loader, purchased 8 months ago, “works very well when everything
Robert E. Brandt, Postville, Iowa: Robert E. Brandt, Postville, lowa. ‘I think another good buy is the Black and Decker Workmate—a_ sort of mechanized sawhorse which can clamp and hold irregular shaped pieces.” Gehl 910 forage boxes: ‘We're very well pleased with the construction and operation of these wagons."’
Gehl 1310 round baler
3 Best Buys1 Worst BuyDale Gilles, Plum City, Wis.: “My 1991 Gehl 1310 fixed chamber round baler is my best buy. It may not work the best for baling leafy alfalfa where leaf loss may be a problem. However, can use it to bale everything from wet silage bales to dry hay to straw to corn stalks with no problems. I've even used it to bale wet sorghum for green feed.”
Kenneth Kerkman, Petersburg, Neb.: “Dow-Elanco’s Broadstrike-Dual herbicides didn’t do the job on our corn last year. It was billed as the best weed control avail(Continued on next page) /GC_). FARM SHOW - 15 Best & Wor: (Continued from previous able for button weed, kochia and lambsquarter which it didn’t kill, It sure was murder on my corn, though. On hills, I lost a lot of the stand.” Kenneth Dibbell, South New Berl, N.Y.: A Gehl 1310 round baler is Kenneth’s worst buy. “It wasn’t built rugged enough for custom work.”
Lorne Orr, Lambeth, Ontario: “My 1992 Gehl 1310 round baler is my best buy. It’s easy and simple to operate. It’s not a high-tech machine, but it works good and is reasonably priced at about $1,000 less than other balers of its size. “Our Bobcat 731 skid steer loader is a great companion to the baler. We use it for hauling and stacking bales.”
Lawrence Munro, Charlotte, Mich.: Lawrence has had good luck with his 1989 Gehl 1310 round baler. “It's easy to use and produces bales that keep extremely well without protection, Has been completely trouble-free so far.”
Gehl extended boom loader
4 Best Buys0 Worst BuysJerry’s pleased with his cab model Kubota RTV-1100C. It’s 1 1/2 years old with 650 hrs. “We use it to feed and check cattle every day. The heat in the cab is nice in the winter.
“We purchased a Kubota M8200 tractor with a loader in 2000. Twenty-five years and 4,000 hrs. later, it’s had only one minor repair. It still uses no oil and runs great.
“I love FARM SHOW and have learned a lot from it. Please keep it in the paper form. I’m 78 years old and not very happy with today’s electronics.
“We were in the construction business for 27 years. We purchased a Gehl extended boom loader that had an 80-hp Deere engine. At 1,300 hrs., the engine literally exploded. A rebuilt used replacement engine cost $13,000. The one that exploded had been serviced regularly.”
“I’m a foreman on my dad’s concrete crew and we use Gehl skid loaders - two 4640 models and an R220. The 4640’s are almost the perfect skid loader for us. They’re small enough to get into most places, yet big enough to handle a lot of material. They have a lot of hydraulic power and ground speed, unlike other skid loader brands that have one or the other but seldom both. The R220 is a real bull when it comes to moving dirt and rocks. The only drawback is all the emission stuff that’s on it.”
“My 2007 Toyota Tundra pickup works even better than I expected. It pulls any load without hesitating.
“I really like my three Gehl skid loaders. I’ve put about 12,000 hrs. on my 1996 3825 model; 10,000 hrs. on my 2002 4635; and 900 hrs. on my 2011 5240. All have performed with minimal downtime and required only routine maintenance.”
Chuck Hadacek, Fort Atkinson, Iowa: “It has lots of power for its size, good safety features, and the hydraulic system works fast,” says Chuck, owner of a 1991 Gehl skid steer loader.
Gehl 1060 forage harvester
2 Best Buys1 Worst Buy“It has unmatched capacity and reliability,” reports David, pleased with his 1990 Gehl1060 forage harvester. “Last year one man using three wagons couldn’t even keep up with it although we were only one mile from our silo. “My 1995 Hesston 1160 14-ft. mower-conditioner goes right through heavy crops and leaves a uniform windrow that dries quickly. I’d buy both the Gehl and Hesston machine again without thinking about it.”
Gary’s had trouble with his 1991 Gehl 1060 forage chopper. “It’s a constant battle to keep this machine going. We’ve had a lot of problems with the metal alert unit. Last spring we had to replace all the bearings on the feed rolls. The bearings had grease fittings on them but there were no holes on some of them to let grease into the bearings. If there was a hole it was on the wrong side of the bearing. The company wouldn’t do anything about it.”
He’s impressed with his 1989 New Hol-land 499 hydroswing haybine. “It’s a high capacity machine that can be easily adjusted to lay hay in a wide swath for drying or in a windrow for making silage. We’ve replaced the guards and knives but haven’t had to make any major repairs.”
Wayne’s the owner of a “best buy” 1994Bobcat753 skidsteer loader. “It’s truly a well-built product. It’s my second Bobcat and both have performed very well. They’re easy to service and trouble-free. We use them every day to load manure, move round bales, haul silage, etc. They always start right up no matter what the conditions. I’d definitely buy another one.
“I like my 1993 New Holland 570 square baler. It has a lot of capacity and does a good job of tying bales.”
On the minus side, he lists his Gehl 1060 forage harvester. “It seemed that I couldn’t use it for even a single day without something going wrong on it. Soon after it was delivered to our farm the wheel bearings went out. The roller chains wore out fast and other bearings also went out. The blower bands lasted for only one season. It has a lot of capacity but requires a lot of power. Also, parts for it were expensive. I got rid of it and bought a 1995 New Holland 790 forage harvester which I really like. It’s much easier to service and pulls easy.”
Gehl 99
3 Best Buys0 Worst BuysRandy Jacobs, Alden, Minn.: “Good volume and lots of pressure at a low price,” says Randy about his Cam Spray gas-driven pressure washer from Northern Hydraulics. “The 5 hp Honda motor is a real improvement over Briggs & Stratton motors.” Randy is also happy with his Gehl 99 silage blower. “It makes blowing haylage into a 90-ft. Harvestore a breeze.”
Rex Sullinger, Ridgeway, Ohio: Rex had bad luck with Ag Pac farm accounting software forhis Apple computer, “I ordered this software over the phone and received it promptly. I found it complicated to set up the account codes and I could not get immediate phone support from the company. They let me return it but have not yet refunded my money.” On the positive side, he’s happy with DuPont's Preview for broadleaves in soybeans. “My local dealer thought! should try itand he was right. Even though we had a 14-in. rain in June, we had few ‘escapes’ at harvest time.” George E, Holmes, ‘Trumansburg, N.Y.: “We've had almost no breakdowns or plugging problems with our 1979 Gehl 99 forage blower. We fill seven silos each year with 1,000 tons of haylage and 550 tons of car corn, It can really blow.”
Burton Graves, Sandusky, Mich.: Burton lists his Gehl 99 forage blower as “best buy.” “I've never been able to plug it with any crop — corn silage, haylage or hay. It has high capacity and is built extra-heavy, The twin wheels work well to break up bunches.”
Gehl 125 grindermixerasa
2 Best Buys0 Worst BuysWilliam Twidwell, Frankfort, Kan.: William nominates his Gehl 125 grindermixerasa “best buy”. “lowneda Gehl MX100 grinder-mixer for 13 years, and this model works just as good. The digital scale really doesn’t save any time so it’s probably no improvement over the cheaper analog scale, The optional electric unloading auger works a bit slow, but pushing a button is certainly easier than cranking a lever.” John Feltes, Garden Prairie, Il.; John likes his Dickey John model DJCCS100 spray conwoller, “This is the most precise spray controller on the market. It's accurate to within one gallon plus or minus on a 500gal. batch. Less than 1% error total. “My 1983 GMC 4-WD l-ton pickup equipped with a 6.2-liter diesel engine is a worst buy. I bought it used in 1983 with 18,000 miles. The engine lasted 46,000 miles before the company replaced it. The second engine lasted 51,000 miles before it blew out. I installed a new engine which now has 45,000 miles. I've gone through two turbo 400 transmissions and three sets of brakes. It spends only 25% of the time doing heavy work. The rest of the time is spent on the highway. How can GM produce such poor quality products and stay in business? I've driven other pickups equipped with Cummins diesels. They make GM's product seem like a joke. When will someone listen to the real needs of farmers and start to build these high-priced ‘work trucks’ to last?”
Chuck Diel, Noble, Ill: His Gehl 125 grinder-mixer heads his “best buy” list. “It has required no repairs and little maintenance.” John F, Phelan, Perry, Iowa: “I bought my 1981 Case 2290 tractor used about a year ago with 1,700 hrs. on it. It’s my best buy because it uses no oil between changes and has plenty of power. I like the quiet cab. “Another best buy is my New Holland 479 hay conditioner that I bought years ago. It's been a faithful workhorse for many years with almost no down time. I'm also still using a 30-year-old New Holland 68 baler. New Holland builds equipment to last.”
Gehl 1260 forage chopper
1 Best Buy1 Worst Buy“My 1999 Patz 4000 feed mixer wagon does a nice job of blending baled hay into a total mixed ration. It also does a good job of breaking up frozen feed that we take from feed bunks. I haven’t had any problems with it and would recommend it to anyone.
“My 1995 Gehl 1260 forage chopper is my worst buy. We’ve owned Gehl choppers for the last 20 years but this 1260 will be our last one. The first year we had it, all the bars on the hay head twisted. The company took care of the problem. It happened again the second year and again the company took care of the problem. However, they told us that if this problem happened again we would be on our own.”
Fred Miller, Arpin, Wis.: “My best buy is my 1989 Gehl 1260 forage harvester which replaced my Gehl 1250 model. The 1260 has some great improvements. I used it to chop three crops of haylage on 235 acres of hay without any problems.”
Gehl 1470 round baler
2 Best Buys0 Worst BuysRalph likes his 1992 Gehl 1470 round baler. “It has made thousands of bales and is still going strong. It has needed only minimal repairs.”
David nominates his 1993 Gehl 1470 round baler as his “best buy”. “It’s equipped with a ‘total density’ control system that lets me make nice firm bales. I had a few problems at first with the electric tie system but they were soon fixed.”
Gehl 1475 round baler
2 Best Buys0 Worst BuysWilliam says his 1998 Honda Fourtrax 400 ATV is his “best buy”. “It’s real handy and a good workhorse. We use it on our farm almost every day. It saves a lot of walking.
“Our Gehl 1475 round baler makes nice, tight bales.
“Our Melroe Bobcat 751 skid steer loader works great and has a grapple fork that works slick on round bales.”
“I’m pleased with my 1995 Gehl 1475 round baler. I do a lot of custom work with it so it gets a lot of use. It took the first season to get the bugs out but my dealer was very helpful.
“I’m very unhappy with my Milwaukee Sawzall. It just fell apart. The casting inside broke and stripped the gears out.”
Gehl 160 disc mower
1 Best Buy1 Worst BuyGene Nance, Chesapeake, Ohio: Gene says his “best buy” is the Banks Engineering turbocharger kithe installed on his 1985 Ford F-350 pickup equipped with a6.9-liter diesel engine (Gale Banks Engincering, 546 Duggan Ave., Azusa, Cal. 91702 ph 818 “It has so much more pulling power now that I wouldn't believe it if I hadn't tried it myself.” 969-9605). “It has so much more pulling power now that I wouldn't believe it if I hadn't tried it myself. On hills where I used to shift to second or third gear pulling 30,000 to 40,000 gross weight, now top at 55 to 60 mph in fourth gear. “The Ford F-350 is great, too. It has 94,000 miles and the only repair other than normal maintenance was to the water pump at 87,000 miles.” Gene’s “worst buy” is his 1989 Gehl 160 disc mower. “The shear pin that allows the cutter bar to break away is located so that you have to remove a shield covering the belts to gettoit. It's abouta 30-min, job. The mower is also hard to adjust and it leaves streaks between the discs when cutting in heavy hay.”
Paul Singleton, Bruceville, Ind.: Paul is the proud owner of a 1988 Gehl 160 disc mower. “It’s built with common sense - no bells and whistles. It'll mow as fast as I want to go in any kind of grass or alfalfa.”
Gehl 2170 haybine
2 Best Buys0 Worst BuysEric Wallis, Rudyard, Mich.: “Our 1992 Gehl 2170 haybine is our best buy. I'll know in 10 years just how good itis, but for now I'm quite pleased with the quiet operation, simple design, low maintenance, and hydraulically-operated tongue.”
Alton Hanson, Pine City, Minn.: “My 1990 Gehl 2170 mower-conditioner works as advertised and has a good finance proWes Sebetka, Malcom, Iowa: Wes is the satisfied owner of a 1987 E-Zee Wrap round bale wrapping machine made by Gerry’s Welding & Fabrication, Inc, (6869 Columbus St., Box 37, New Vienna, Iowa §2065). “I tried two other brands, but the EZeo Wrap worked best. The first year I used itto custom wrap 1,450 bales. The last two years I've wrapped only 1,925 bales because of drought. [held some 1989 hay over into 1990 and the wrapped bales still look good a year later. installed a new chain this year that cost $15, Otherwise, it just keeps on running with very little upkeep.”
Gehl 3610 skid steer loader
1 Best Buy1 Worst BuyCurtis Weaver, Nottingham, Penn.: “We're absolutely pleased with our Massey Ferguson 390T tractor. It has 1,800 troubletree hours on it. Plenty of torque and it’s fuel efficient, “We also like our two Claas round balers, a 46 Rotocut and a 66 Rollant. They're built with the quality that all round balers should have and are tough, simple, and trouble-free to operate. We use the tractor and two balers for custom work. We made over 5,000 bales this year.” On the “worst buy” side, “Electrical and hydraulic leaks have plagued us almost from day one on our Gehl 3610 skidsteer loader. It has only 1,900 hours on it.”
Leo Heimann, Winslow, Ill.: “It's easy to service, starts in any weather, and has a lotof power,” says Leo about his “best buy” 1991 Gehl 3610 skid steer loader.
Gehl 95 grinder mixer
2 Best Buys0 Worst Buys“Our 1977 Gehl 95 grinder mixer is our best buy. Over the years we’ve used it to grind about 300,000 bushels of corn and milo for our hogs. We grind a 2-ton batch every day. It has required very few repairs and is on its third set of hammers. It still looks and runs as good as new.”
On the negative side, he lists the Aqua tube feeders he used in his hog finishing barn. “These type feeders are designed to let hogs eat either dry or wet feed. However, it takes a lot of labor to keep them adjusted so they’ll work properly. If they’re set so tight that they don’t waste feed, they plug up. And of course if you open them up too much, that wastes feed. Because of all the wasted feed our feed conversion ratio was terrible. We decided to install a new feeder of a different brand, and the feed savings on just one group of hogs paid for the new feeder.”
Ted’s impressed with his 1985 White 2-85 tractor. “It has 3,100 hours on it but still works great. My only expenses have been for filters, tires, and a radiator repair. I use it to do all the major work on my 200-acre farm.
“I use my 1976 Gehl 95 grinder-mixer every week. Over the years I’ve replaced three bearings and a main belt. No other problems.”
On the minus side, he lists his 1980 White 2-70 tractor. “I bought it used with only 675 hours on it and thought that I was buying a quality product that would provide years of service. However, after two broken crank-shafts, a failed water pump, and hydraulic and transmission problems, I finally gave up and sold the tractor to a dealer. It had only 1,510 hours when it left the farm.
“I own several Oliver tractors - an 88 diesel, 77 diesel, 880G, 550G, and 1550G, along with the White 2-85, and have had good luck with all of them. Some of the older models have more than 8,000 hours on them with no repairs other than engine overhauls. Some of my neighbors have 1655 models with high hours and they haven’t experienced anything like the problems I’ve had with my 2-70. When I bought the 2-70 I thought that it was identical to the 1655. Since then I’ve noticed that 2-70’s are the most available used White tractor, and now I know why.”
Gehl s-wheel rake
2 Best Buys0 Worst BuysJerry Stoner, Downing, Wis.: Jerry's “worst buy” is his New Holland model 254 hay rake and tedder. “The grease zerks won't take grease and fall outof their plastic bushings. It works too rough when raking hay - all that’s left is the stems. “My Gehl S-wheel rake doesn’t pick up hay on uneven ground. It takes two hours to set il into the right raking position.” “My New Idea Discbine is a best buy, It cuts tangled hay, doesn’ ttakealotof power, and it’s simple to grease. It lets me cut hay as fast as the tractor can go.”
Nelson Howell, Jerseyville, Ont.: “It steers too slow and the powershift jerks at high engine rpms,” says Nelson about his inate dUYS Case-IH 2294 tractor equipped with mechanical front wheel drive. Nelson likes his Gehl fingerwheel rake. “It makes windrows the exact width of our round baler.”
Gehl 1000
1 Best Buy0 Worst BuysMarvin Vlietstra, Kalamazoo, Mich.: “Buying this 1982 Delaval Rationmaster computer feeding system was the worst business decision I've made in 40 years of dairying. It creates three new problems for every one it solves, If itraised production at all it’s been the most expensive raise I’ve ever seen, Italmostrequires a full-time man just to keep it running and has never gone a full week withouta breakdown. Idon’t fault the dealer, He does his best. Butevery time it breaks I have to decide whether to fix itor haul it out to the back forty and try to put it behind me.” “Our 1979 Gehl 1000 forage chopper has chopped all the feed for our 140 milk cows and 100 young stock for the past 9 years with a bare minimum of repairs. It cuts extremely fine and handles well. Our 1983 Gehl 99 forage blower blows the gummiest haylage up an 80-ft. silo without plugging. Excellent dealer service.”
Gehl 1065 pull-type harvester
1 Best Buy0 Worst Buys“We traded a New Holland 1890 self-propelled forage harvester and a Deere 3960 forage harvester in for a 1996 Gehl 1065 pull-type harvester. Both of the old machines did a good job, but we had some expensive experiences with foreign metal objects and wanted a machine equipped with a metal detector. “We use a Deere 4630 tractor to pull the harvester and it performs quite well. We’re glad that we have the metal detector. Last year while we were harvesting silage the metal detector went off 33 different times on 26 rows of corn that bordered a fence around our property. It turned out that a month before we went into the field our neighbor had a young fellow replace the electric fence wire. He threw lengths of old wire helter-skelter into our standing corn. Without the metal detector we’d never have known about the wire.” On the negative side, he lists parts-ordering through the AGCO company. “My dealer tries his best to provide good service, but ordering parts through the AGCO system can be a real nightmare. I once ordered an oil seal for a manure spreader but instead received a shear bar designed for a loader bucket. It turned out that both items had the same part number. Recently I needed to rebuild an axle assembly for my White field cultivator. After three deliveries of parts that didn’t fit, I disassembled another axle and found the matching parts at a Deere dealership.”
Gehl 1265 forage chopper
0 Best Buys1 Worst Buy“I’m impressed with my 1997 Case-IH 8840 windrower which I bought used with 600 hours on it. It drives and handles well and cuts clean and fast. It also has a comfortable and quiet cab. Everyone in my family wants to cut hay now.”
On the “worst buy” side, he’s had problems with his 1996 Gehl 1265 forage chopper. “It’s equipped with electronic sensors that are supposed to regulate the chopper and shut it down if something plugs up or if any shafts slow down too much. However, the sensors never have worked. Since day one we’ve had to use a manual bypass switch. The dealer’s mechanic told me that most of these sensors fail within one year. The chopper itself runs well and has a lot of capacity. But the electric gismo’s on it belong on the rockpile.”
Gehl 1315 SX Scavenger v-bottom manure spreader
1 Best Buy0 Worst Buys“My 1997 Gehl 5635 SX skidsteer loader has excellent visibility for a machine of its size. It also has a lot of power and lift capacity and is easy to operate because of the T-bar operating system.
“My Gehl 1315 SX Scavenger V-bottom manure spreader works great. It can spread thick barn manure or runny pit manure in a thin, even pattern. The wide expeller door and round auger can handle anything I put in it. Both my dealer and the company have been great.”
Gehl 1450
1 Best Buy0 Worst BuysJames R. Burk, Booneville, Ark.: “This round baler leaves too much hay at the edges of windrows. The pickup should be 6-in wider than the bale chamber. We cannot see twine going into the baler and there's no way to judge the number of wraps on the bale. We cannot judge when the twine arm is close enough to the edge without hitting the cutoff. can’t make a bale heavier than 660-Ibs. in Bermuda grass. Makes a good, tight 4-ft. wide by 5-ft. high bale in alfalfa but the bale tips over if stored across even a slight incline,"’ reports James about his Gehl 1450 baler, He nominates his 6507 Deutz 60-hp. tractor as “best buy”. “We use this tractor to pull our round baler. After one year of use we have absolutely no complaints.”
Gehl 1460 round baler
0 Best Buys1 Worst BuyPaul Wallis, Granton, Ontario: Paul says his 1988 Deere 430 and 1989 Deere 435 round balers “have been very reliable. However, sometimes the stems get under the twine knife and prevent twine cutting. Wind can also interfere with twine tying. “My 1987 Gehl 1460 round baler is a worst buy. The belts constantly break and wrap around the top pulley. It cost $400 to fix.”
Gehl 1465
1 Best Buy0 Worst BuysWalter Zurakowski, Thorp, Wis.: “My best buy is a 1988 Gehl 1465 round baler. It picks up all the hay even at 8 mph. I really like the total density control feature which lets me adjust belt tension throughout the entire bale. I also like the hydraulic tie, and the crowder wheels really bring the hay in.”
Gehl 1560 forage blower
1 Best Buy0 Worst BuysStan Campbell, Iona Station, Ontario: “It’s the best blower we've ever had,” says Stan about his Gehl 1560 forage blower. “Wet haylage doesn’t plug it up like on other blowers. The only time it plugs is when the silo is full. “Our 1988 Ford F-2504-WD pickup is a worst buy. The front brakesrattle constantly and the rear end leaks oil. Electronic fuel injected engines aren't made for farm use. It ominate t Buys won’t start on a damp morning or if it gets a little wet. The anti-lock brakes lock up all the time. My 1979 Ford F-2504-WD pickup equipped with a 400 cu. in. engine isa better truck. It has almost 200,000 miles.”
Gehl 170 Mixall grinder mixer
1 Best Buy0 Worst BuysPaul H. Rissler, New Enterprise, Penn.: Paul’s had good luck with his 1988 Deere 3155 tractor, “Ithas 115 hp but is still very fuel efficient. The gear shift levers are conveniently located and the engine has lots of torque. One problem was that the pto clutch went out before 50 hours but it was covered by the warranty. I have 800 hours on it now. “My 1989 Gehl 170 Mixall grinder mixer makes better ground ear corn than any other roller mill I’ve ever seen.”
Gehl 1710 round baler
1 Best Buy0 Worst BuysA 1994 Gehl 1710 round baler rates as his “best buy”. “We put up over 2,500 bales every year with it. It’s a super good baler. It starts easily and handles all types of hay. It’s well built.”
Gehl 175 manure spreader
0 Best Buys1 Worst BuyJeff Schlaeger, Pine City, Minn.: Jeff's unhappy with his 1990 Gehl 175 manure spreader. “To change unloading speeds you pull on a rope. However, the rope pulls so hard that I had to get off and use a pipe wrench to throw the gearbox in and out of gear. My dealer tried to solve the problem, but with no luck. I wrote to the company but they didn’t answer my letter and no one ever came out. I'll never buy another piece of Gehl equipment.”
Gehl 1850
1 Best Buy0 Worst BuysMartin Hogan, Wyaconda, Mo.: “My 1981 Gehl 1850 big baler is virtually troublefree and a best buy. It'll bale anything, anytime, with no trouble at all. I’ve used it for seven seasons and spent only $200 on parts.”
Gehl 1875 baler
1 Best Buy0 Worst Buys“My 1994 Agco Allis 9630 tractor works great but has had a lot of minor problems. The company and dealer have been slow to act on warranty work. “MyGehl 1875 baler makes good bales. It’s well built.”
Gehl 2240 swing frame mower
0 Best Buys1 Worst Buy“My Deere 348 twine-tie baler has tremendous capacity and is a best buy. I’ve used it to make at least 50,000 bales and it probably hasn’t failed to tie more than 20 of them. I like the multi-luber for the bale knotters.
“My Gehl 2240 swing frame mower is my worst buy. It tends to plug up in heavy hay and doesn’t raise up very high. Also, it doesn’t seem to be built strong. The reel and push bar bent the first day we used it. Our dealer took good care of us, though, and replaced all the defective parts with new ones.”
Gehl 2340
1 Best Buy0 Worst BuysRobert E. Ziegenhagel, Medicine Hat, Alberta: Robert likes his 1989 GM 4-WD 1/2-ton pickup. “It has over 125,000 miles of rough ranch work and highway driving. I've used and abused this pickup something awful but it just keeps on running like a clock. I'll buy another one.” John C. Rutkowski, Waterford, Penn.: “My Gehl 2340 discbine does a nice job of conditioning hay, pulls easy, and is well built. One minor problem is the hitch, I'm replacing it with a Deere hitch. Then it will be an even better machine. “My McConnel springtooth harrow is my worst buy, It can be mounted on a 3-pt. hitch or used as a pull-type. However, when you use the drag-type hitch the cross bar that the 3-pt. hitch is mounted on drags on the ground. Whenever I try to correct that problem by lifting the 3-pt. enough so the bar won't drag, the front teeth won't even dig in the ground. the entire machine is built flimsy. I have to use it with a smaller tractor so that won't bend any cross pieces or braces.”
Gehl 250 manure spreader
0 Best Buys1 Worst Buy“I recently bought a mid-1980’s New Hol-land baler equipped with a Model 70 thrower that’s a ‘best buy’. I was going to keep my mid 1970’s New Holland 273 baler equipped with a Model 54A thrower. But the 311 had so much more capacity, ran so much smoother and made nicer bales, I knew I wouldn’t use the 273 anymore so I traded it off.”
On the “worst buy” side, he’s not happy with his Gehl 250 manure spreader. “The apron has a light shear bolt that breaks much too easily. To change apron speeds is also a hassle. You have to pull a rope on a cam about 4 ft. to change one gear. It gets real tiresome.”
He’s also disappointed in his DeLaval Harmony milkers with DeLaval pulsators. “The pulastors are built so flimsy they break easily if dropped or are bumped hard. The milking unit leaves milk in the bowls so when you switch to another cow, milk runs out of the inflations onto your leg.”
Gehl 2500 skid steer loader
0 Best Buys1 Worst Buy“Our best buy of all time is our 1962 Oliver 1600 diesel tractor. We bought it used about five years ago. When we bought it the tachometer didn’t work but had a reading of 7,500 hours. I think the tractor has about 10,000 to 15,000 hours on it now. It has never been in the shop since we’ve had it. It doesn’t use any oil and it runs great. It’s equipped with a KMW front-end loader which we bought five years ago. The loader has also worked great and hasn’t broken down once.”
On the negative side, he lists his Gehl 2500 skid steer loader. “We’ve never been able to use it for more than 10 minutes without it breaking down. I wouldn’t recommend this machine to anyone.”
Gehl 308
1 Best Buy0 Worst BuysGary Kuechenmeister, Melvin, Mich.: “My best buy is a 1987 Gehl 308 fingerwheel-type V-rake. It’s easy to use and rakes cleanly, placing two windrows side by side so I can bale without weaving from side to side, “I'm also pleased with my DR Trimmer/ Mower which I bought in 1986 from Counuy Home Products (Box 89, Cedar Beach Road, Charlot, Vt. 05445 (ph 802 4252196). It’s powered by a quiet, smooth fourstroke Briggs & Stratton engine that’s balanced over a pair of large wheels. The nylon cutting cords are the heaviest I’ve seen and I can fasten four or more leads on the machine. I can cut heavy weeds fast without having to carry the machine and feeling all ‘shook up’ afterward.” Gary also likes his Sur-Lock “Quick Tach” made by MDS Mfg. Co. (Parkston, S. Dak. (ph 605 928-7951) for Deere and Farmhand loaders. “It lets me switch from one bucket to another or to my bale spear quickly and easily right from the tractor seat and it’s priced fairly.”
Gehl 312 Scavenger II manure spreader
1 Best Buy0 Worst BuysCorey Baker, Rushville, Ohio: Corey's had bad luck with his Pax 6 bu. rotary teeder. “I like the rotary design of the feeder, but the quality of parts and construction is poor. After only three months of operation, an adjusting nut on the feeder came loose and now the feeder has to be torn down and fixed. had to replace bearings in three of my eight feeders last year.” On the plus side, “My 1990 Gehl 312 Scavenger II manure spreader is a best buy. Luse itto haul all types of manure from solid to liquid and it spreads each type evenly. really like the square auger in the tank, “My 1989 Haybuster 147 no-till drill has plenty of weight for all no-till applications, It has two seed boxes, which works great for planung two different kinds of crops. The double offset openers handle even the toughest trash. It’s an all-around excellent piece of equipment.”
Gehl 315 Scavenger manure spreader
0 Best Buys1 Worst BuyLarry likes his 1999 Case-IH 75XT skid steer loader. “The heater could be improved, but all in all it’s a well-engineered machine. It has an excellent engine and the controls are smooth and easy to operate. It has 650 hours on it. We’re well pleased with it.”
On the negative side, he lists his 1992 Gehl 315 Scavenger manure spreader. “When these spreaders first came out they put a no. 100 roller chain on the drive on the main auger. Then they decided that a no. 80 chain would do. The no. 80 chain works okay if you’re hauling only slurry. However, whenever we used it to haul pen-packed manure the chain almost always broke. We finally traded the spreader in. I understand that the company has now gone back to using a heavier chain again.”
Gehl 3310skid
0 Best Buys1 Worst BuyDennis Girtler, Winona, Minn.: “It has all the power I need and lets me carry 800Ib. round bales,” says Dennis about his “bestbuy” 1988 Gehl 3310skid steer loader. “It also costs less than other brands.” Dennis is disappointed with his 1987 New Idea 362 manure spreader. “The gearbox was reworked in 1987 but by last spring it was back in the repair shop.”
Gehl 3510 skid steer loader
1 Best Buy0 Worst Buys“My 1996 Gehl 3510 skid steer loader is my best buy. It’s just like having another right hand for doing pivot irrigation work, moving snow, pulling posts, and so on.
“My 1994 Dodge 1500 4-WD pickup equipped with a 360 cu. in. engine has more than 154,000 miles on it. All I’ve had to replace is the fuel pump and the water pump.
“My Ryobi weed trimmer, which I bought at Wal-Mart, is my worst buy. It wouldn’t start so I took it to Wal-Mart’s service people. They got it started once. After arguing with them for four months they finally refunded my money. Since then I’ve purchased an Echo weed trimmer, which works great.”
Gehl 3825 skid steer loader
1 Best Buy0 Worst BuysWalter says he likes the safety features built into his 1998 Gehl 3825 skid steer loader. “The safety guard has to be up in order for the operator to leave the seat. When the safety guard is up, everything is locked in place. When the safety bar is down, you can rest your arms while working the T-bar controls without having to move your feet. It’s a very comfortable machine to operate. It’s well balanced and is short enough to maneuver in tight corners.”
Gehl 3-pt disc mower
1 Best Buy0 Worst BuysLue’s impressed with his 1994 Gehl 3-pt. disc mower, model DM 165, which cuts a 9-ft. 2-in. swath and is equipped with 7 discs and 2 blades. “It cuts clean and is trouble-free and easy to maintain. I use it to mow 125 to 140 acres of hay per year. The dealer brought it out on a rainy day and we hooked it up to my IH 706 diesel tractor between showers, then started cutting in a field that had waist-high clover and timothy. We made one round and adjusted the mower’s four drive belts. Then it started to rain hard. It rained about 2 inches but we kept going. The mower cut clean and didn’t plug up. We were able to go 6 to 7 miles per hour without stopping. One problem was that when we sized the pto shaft we cut it 1 1/2 in. too short which caused it to break away. However, the dealer replaced the shaft at no cost. I like being able to mow 6 to 7 miles per hour with no problems and the mower was priced right too. I’d recommend it to anyone.”
Gehl 4610 skid steer loader
1 Best Buy0 Worst Buys“I bought my 1991 Gehl 4610 skid steer loader equipped with a diesel engine just six months ago and it’s my best buy. It starts great in cold weather. The hand controls are easy to operate once you get used to them. I like the controls better than the ones on the Bobcat I used to have. It has standard self-leveling which works great for pallet work. The only negative is that I’ve been told that engine parts for it will be expensive.”
“My 1995 Brillion field cultivator is my worst buy. So far I’ve only used it on seven acres but it seems to pull harder than the Deere model it replaced, which was 2 ft. wider. Resetting the depth is more of a pain, with four settings instead of one on the Deere model I had been using. However, it handles trash well so I may learn to like it.”
Gehl 4625 skid steer loader
1 Best Buy0 Worst Buys“My Gehl 4625 skid steer loader does everything that I expected it to when I bought it. Very comfortable with responsive controls. It’s definitely a best buy.”
Gehl 4635 SX skid loader
1 Best Buy0 Worst Buys“The Gehl 4635 SX skid loader we bought used in 2008 has required only routine maintenance. We’re well-pleased with it.”
Gehl 4835 skid loader
1 Best Buy0 Worst Buys“My 2003 Gehl 4835 skid loader is my best buy. I traded my smaller Gehl 3825 for it last April. It was a good machine. However, the 4835 has the lifting capacity I need and more power. I got the factory cab and heat option which I like a lot. I use it every day on my dairy farm no matter how cold it gets.”
Gehl 4835 SXT skid loader
1 Best Buy0 Worst BuysBlake says his 1999 Gehl 4835 SXT skid loader is his “best buy”. “I bought it used with 332 hours. I had some minor problems with bolts breaking on the quick attach mechanism, but otherwise it works great.”
On the “worst buy” side, he lists his Suzuki 500 ATV equipped with an automatic transmission. “The transmission and clutch went bad at 1,000 miles, then the replacement transmission and clutch failed again at 2,200 miles. A starter shaft broke and caused $2,500 worth of damage. The warranty covered the first transmission and clutch, but the starter shaft broke only four days after the warranty had expired. We plan to get rid of this machine.”
Gehl 4835 SXT Turbo skid loader
1 Best Buy0 Worst Buys“Our 2008 Gehl 4835 SXT Turbo skid loader is built to handle tough jobs and always starts, even in the coldest weather. We love the Deutz engine – it’s very fuel efficient.”
Gehl 4840 skid loader
1 Best Buy0 Worst BuysHoward likes his 2006 Gehl 4840 skid loader. “I’ve owned at least 6 different Gehl skid loaders over my 30 plus years of farming. I live in the woods with more than a half mile long lane and use my skid loader with a snowblower, grapple bucket, and wood splitter. It’s a quality, dependable skid loader with great company service.”
Gehl 5240E skid loader
1 Best Buy0 Worst Buys“My 2011 Gehl 5240E skid loader is always ready to go. I really like the 2-speed feature. The machine is powered by a Deutz engine that starts every time. This skid loader is built solid, whereas a lot of the new skid loaders are made of thin metal with poor rubber hoses.”
Gehl 5620 skid steer loader
1 Best Buy0 Worst BuysJames W. Galbreath, Street, Md.: “My Gehl 5620 skid steer loader is equipped with a Worksaver 2000 bale grabber. Both products are best buys. This combination makes handling big round bales much easier and more convenient for both me and my customers that it has increased my hay sales. It lets us load bales any way the customer desires and stack them on end for storage without damaging the strings.”
Gehl 5635 SX skidsteer loader
1 Best Buy0 Worst Buys“My 1997 Gehl 5635 SX skidsteer loader has excellent visibility for a machine of its size. It also has a lot of power and lift capacity and is easy to operate because of the T-bar operating system.
“My Gehl 1315 SX Scavenger V-bottom manure spreader works great. It can spread thick barn manure or runny pit manure in a thin, even pattern. The wide expeller door and round auger can handle anything I put in it. Both my dealer and the company have been great.”
Gehl 5635 SXT skid loader blew
1 Best Buy0 Worst Buys“At 2,400 hours the engine on our 1998 Gehl 5635 SXT skid loader blew up while idling. Before that we had to replace a hydraulic drive pump after it self destructed. Then the frame started cracking. We sold the machine a few years ago and bought a Case 95 XT which we like.”
Gehl 6620
0 Best Buys1 Worst BuyBill Marquardt, Petoskey, Mich.: “I like my 1990 Deere 430 round baler, I’ve never had a problem with it and I really like the bale monitor. It's a necessity for any operator, “I've had trouble with my 1990 Ford F-250 Club Cab pickup. The engine had to be replaced at 70,000 miles because of crank backlash, and the transmission had to be replaced twice because it didn't have ( ( enough cooling capacity. I didn’t get any help from the dealer at all. “T've also had problems with my Gehl 6620 skid steer loader, The servo motors are junk, and the factory cylinder leaks at the welds. This machine just isn’t built well.”
Gehl 72 flail chopper
1 Best Buy0 Worst BuysWilliam Griessler, Delanson,N.Y.: “My Gehl 72 flail chopper, which I bought used at an auction, works great. The high speed rotor cuts the crop short and blows it well back into my self-unloading wagon.”
Gehl 733 liquid manure spreader
0 Best Buys1 Worst Buy“My worst buy of all time is my Gehl 733 liquid manure spreader. Broken spindles and axles have been a constant problem. We finally had to replace all the axle spindles and bearings with ones made by a different company. Gehl refused to stand behind its product. The company should hire some common sense engineers.”
Gehl 750
1 Best Buy0 Worst BuysLeroy 5°F without using a block heater or starting fluid. I really like the synchronized transmission with the hydraulic high/low ranges. “My 1984 Gehl 750 forage harvester with a 2-row head is also best buy. It has lots of capacity and is built heavy. I like the all-electric controls and the in-head hydraulic knife sharpener.” As worst buys he cites, ‘Shop tools made in Taiwan, including an 8-in. Ys hp. bench grinder, 12-ton hydraulic jack, and pneumatic sand blaster purchased from Northern Hydraulics. The grinder has poor power, overheats and smokes easily. The hydraulic jack leaks oil at the base. After using it only about a dozen times it’s at 1/4 capacity. The sandblaster does a poor job. Restricts airflow to about 1/2 of the air compressor’s output.” William Schuening, Pendleton, Ore.: As “best buy” he names his 1985 Yamaha 4-wheeler, ‘I like the 4-wheeler because it makes it easy to get around on summer fallow ground and works great for spot-spraying and burning weeds in ditches,”
Gehl 760
1 Best Buy0 Worst BuysPaul Dudley, Meridian, N.Y.; He's pleased with his Gehl 760 forage blower, “We especially like having the blower directly behind the cutterhead. This eliminates a cross auger and provides a lot of access to the cutterhead and knife sharpener. The hydraulic knife sharpener rebevels each knife individually and the shear bar is easy to adjust. Also the machine is vibration-free. It would be hard to improve this product.” Paul's disappointed with his Duracraft electric band saw. “We use it for cutting steel but it will not cut straight and destroys band blades as fast as you can put them in, The dealer tried to fix it but it’s hard when you're working with junk.”
Gehl 970 tandem axle forage
1 Best Buy0 Worst BuysA 1995 Gehl 970 tandem axle forage wagon rates as Thomas’s “best buy”. “I use this large forage box as a feeder wagon. It holds a lot of feed and allows me to feed more than 200 cows at a time with it. I mounted a larger sprocket on the front discharge apron in order to slow it down.
“My 1991 Case-IH Maxxum 5130 front wheel assist tractor equipped with a frontend loader is my worst buy. I’ve had to replace the wheel seals on the front wheel assist five times. The problem is that bale strings wrap around and cut out the seal. Finally I had to make a device to cut strings before they can wrap around the seals. If this tractor is sold as a loader tractor, why didn’t the company design something to prevent damage to the wheel seals? This tractor has also had problems with leaky hydraulics.”
Gehl 980 forage boxes mounted
1 Best Buy0 Worst BuysRuss owns three 1995 Gehl 980 16-ft. forage boxes mounted on 12-ton tandem axles. “I farm with my father and we do some chopping for a couple of neighbors along with our own. Last year we put about 600 loads through the wagons. They unload smoothly without ‘slugging’ the blower. “My two Deutz-Allis 6275 front wheel assist tractors are both terrific.”
Gehl CB1260 forage harvester
0 Best Buys1 Worst BuyReg Schmidt, Thorsby, Alberta: He’s disappointed with his 1990 Gehl CB1260 forage harvester, “During the first hours of operation the header auger broke away from its drive shaft, When we removed it we found it was only partially welded. Also the auger was made of very light material compared to other forage harvesters. After a few days of use the pickup bands began breaking off. They were poorly designed and made out of thin material. As the season wore on had various problems with the Auto Max system and the header drives. I had previously owned a New Holland 900 which performed well. I thought I was moving up to a bigger, better machine. Instead paid a premium price for a big headache.” Reg's “best buy” is his 1989 Gehl SL 3310 skid steer loader. “It's very agile and powerful for its size and is well designed and well built. I especially like the ‘T’ bar controls and the flip-up canopy which makes il easy to service.”
Gehl CTL 60 compact track loader
1 Best Buy0 Worst Buys“We like our 2007 Gehl CTL 60 compact track loader. We use it in our sand and gravel pit and on small excavation projects, hauling it behind a 3/4-ton pickup. This track loader will go in places where I can’t even walk. We trade machines every 500 hours but always go back to the same brand and model because of their power, ergonomic controls, and room. So we’ve owned the previous 2004 and 2005 models with similar results.”
Gehl MS 325 manure spreader
1 Best Buy0 Worst Buys“I like my 1993 Gehl MS 325 manure spreader. It’s equipped with a hydraulic apron drive which is a feature I wouldn’t be without.”
Gehl RB1875 baler
0 Best Buys1 Worst BuyNorman says his “worst buy” is his 1997 Gehl RB1875 baler. “I’m not dissatisfied as much with the baler as I am with the company and its dealers. My dealer did some warranty-covered work on the baler, but he didn’t have all the parts that he needed to repair it. Three parts had to be shipped in and I had to pay $149.75 in overnight express fees for them. The company’s RB1870 model has some of the same parts found on this model, but the company didn’t have them in stock. Evidently, they don’t require their dealers to stock enough spare parts. Maybe the dealers should cannibalize from the company’s other new balers so that they can keep their customers going. Farmers should be able to order parts through regular channels and not have to pay high overnight express fees.”
Gehl Scavenger II model 309 manure
0 Best Buys1 Worst Buy“Our Gehl Scavenger II model 309 manure spreader is our worst buy. The only manure that comes out is whatever the auger touches. I have to push the load into the auger by hand about three times per load. The company gave me some ideas, but basically said that conditions must be perfect or it won’t work. In my opinion, that doesn’t cut it for a spreader that was advertised as a machine that can handle all types of manure. I offered the company rep $50 per load to haul out the last three loads from our manure pile, but I never heard back from him.
“If anyone knows how to solve this problem, I’d like to hear from them. I wouldn’t sell this spreader to my worst enemy. I’d rather find a way to make it work.”
Gehl Scavenger II 309 manure spreader
0 Best Buys1 Worst Buy“Our 1987 Gehl Scavenger II 309 manure spreader is the worst product I’ve ever owned. The only material that comes out is whatever I push into the auger by hand. The company had some ideas how to fix it but all they amounted to was that conditions must be perfect or it wouldn’t work. That doesn’t cut it for a spreader that was advertised as a machine for all types of manure. If anyone has a modification that will solve the problem, I’d like to hear about it.”
Gehl discbines
1 Best Buy0 Worst BuysMelvin’s had good luck with both of the Gehl discbines he’s owned. “I bought a new one in 1994 and cut 800 acres of undesirable, rough, rocky ground every year for three years. I didn’t spend a dollar in repairs on it other than to replace the blades. So I bought a new 2360 in 1998 and it’s just as good as the old one. It’s the best new piece of equipment I’ve ever purchased.”
Gehl grinder/mixer
0 Best Buys1 Worst BuyElton’s “worst buy” in 20 years of farming is a 170 Gehl grinder/mixer he bought new in 1990 for $8,900 plus the trade-in of his old mixer.
“It’s actually not a bad mixer, but we got poor company support for numerous problems that started early-on,” Elton says. “Within three months, the chain had rubbed a hole in the U-trough that carries corn from the hammermill to the mixer. We took the machine to the dealer we bought it from and they put on a new trough, but they installed smaller sprockets than the mixer was equipped with to correct the problem.
“From that point on, the mixing auger would jump off the gearbox as you were filling the mixer. Then we had to climb inside to empty the mixer to reconnect the auger. This would take two guys two or three hours to do, and it happened as often as twice a day. At the same time, the mixer started to eat gearboxes. We had to put in a new gearbox nearly every six months at almost $1,000 a pop. I assumed the two problems were related but our dealer’s mechanic couldn’t find the problem. Finally, in the spring of ‘96, a sprocket went out. After two weeks, Gehl replaced it, along with a second sprocket matched to get the right speed on the auger. After that, the gearbox never wore out and the auger never jumped off the gearbox again. So it’s quite clear to me the problem was the mismatched sprockets put on by the dealer.
“All Gehl offered us for all our trouble was $1,000 off the price of a new 170 grinder/mixer, which lists for $17,000. But we put thousands of dollars worth of work in on the machine.
“We finally bought a new Farmhand, which is basically the same machine, for $11,000. We still have the Gehl.”
Gehl chopper box model
0 Best Buys1 Worst BuyLawrence Link, Conklin, Mich.: Lawrence's “worst buy” is his 1989 Gehl chopper box model 970 equipped with an extension feeder, “While I’m feeding chopped hay into a bunk feeder, the hay gets under the cross conveyor chain and plugs it up, leading to broken parts and down time.” His “best buy” is a 1988 New Holland 311 baler equipped with a bale thrower. “It's a great time saver,”
Gehl man ten months
1 Best Buy0 Worst Buys“I’m disappointed in companies that push their block men to cover more territory. It took a Gehl man ten months to check out a problem that I had with a baler. The dealer and company finally took care of the problem, but after that long it was hard to remember exactly how everything worked. It seems like some of these people are forgetting who really provides their pay.”
Gehl disc mower
0 Best Buys1 Worst Buy“My worst buy is my Gehl 9-ft. disc mower. The problem is that it cuts slow. I have to operate my tractor two gears slower than I did with my previous mower, an 8-ft. Vicon model. Also, this mower has three cutting blades per disc while the Vicon needed only two.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.